i cannot send sms in mui 11 so i downgrade into mui 9, still cannot send sms.
then i go into safemode by power off, then power on. when i see mui logo, i press volume down like doing click click untill it boot up into safe mode, but still i cannot send sms.
is it means hardware problem, or software problem.?
Sent from my Redmi Note 7 using Tapatalk
In Messaging app's setting please check with SMS center number set correctly? if not then please add and if you don't know then check on you network carrier website or contact them for the same. restart the phone and SMS should work just fine.
Related
Anyone else have a problem where they send a message to someone and then the person you sent it to, end up receiving 2 instead? It seems to be all the time. Any ideas? Im with O2 in the UK. Also the annoying LED's on the unit. Sometimes when i do the reg fix it works fine, other times after a h/reset and reg fix applied, the light starts again about 10 mins later, and it seems impossible to stop it......
Help guys
XDA IIs
CE 1.40
Radio 1.12
Ex: 1.40 cooked
Ignore this one, turns out after a little research, if you use SPB Pocket plus close button feature, you have to make an exception for tmail.exe
heres a fix
When an sms is compsed there is an option in the sms settings that will allow you to tick “Use Unicode when necessary” if this option is ticked what will happen either your sms will be sent twice
(for the people who really want know what Unicode is, its software that allows software to see foreign charcthers, such as chines Koren. More info at http://www.unicode.org/)
So just untick the option will resolve the problem. When this option is ticked instead of your charcherts size being the 160 it is dropped to 70 charcheres so as soon as you go over the 70 mark its 2 sms.
To fix this you go from the front of your device
Click on start, then down to messaging.
Tap on accounts in the tab below and then select accounts from the list.
Now tap on tex messages
Now just click Unicode off.
AND there we have it.
Actually, Using the option Unicode when necessary uses Unicode formatting ONLY when a Unicode character is found in the message.
I always put this option on, and when my message contains any Unicode character, it converts the whole message into Unicode (hence the message size will be a multiples of 70 chars and not 160). But if your message is pure ANSI characters (all English) then it will be send as it without using Unicode encoding (160 chars).
RZZKT slaam walicum, bud or just plain hello,
i see your point, only thing is here in the UK when we send an sms it goes through spefic sms centre's on the mobile networks then gets routed through various sms gateways etc etc what happens on the Vodafone network and on orange is when you compose a sms say just right TEST if the unicode option is ticked on then the sms when routed will be sent 2ice, on vodafone iv tracked the process for the sms and we can see whats called sms refernce number and if a phone is sending multipull sms the refernce number will be the same, but from my device(spv m2000-unlocked and office qteck9090) the sms refernce number stays the same so the networjk does not belive its a multipull sms but instead it treats it as the device is sending 2 seperate sms's--even when the tracking info time tag shows id time frame i.e sms 1 19:00:16secs sms 2 19:00:16secs.
As i work for Vodafone i can track the sms traffic on our system but its the same situation with the orange network when i have my orange sim in the spv.
Just the way our networks work im afraid. As for the above poor chapy, its going to either be what we are discussing or issue issue with his device(which may be more probable orrrrrrr issue with o2)
never mind wish him all the best!
N2h, wa'alaykom assalam
Ohh i see! thats why its not happening here with me.
We have something called SMS Center, we just put this center's number in the SMS message settings.
Its nice to work in Vodafone... guess you have unlimited phone calls 8)
Lucky you :wink:
Hello everybody.I searched the forum and didn't find any fix for this problems,i hope you will help me.
1.My samsung doesn't show the sim contacts,it allows only to copy them to phone memory.Is it possible to show them directly form the sim card ?
2.When i receive a sms,it apears the senders phone number(international form),not his name.Its verry annoying.
3.And everytime i try to send a message,i need to write my number(" From: " ).When i try so reply a message,that field doesn't even show,and doesn't let me to send a message.
Sorry for my bad english.Thank you !
Alright have you tried in contacts then go to settings then hit more then display setting and you can pick how the phone show contacts phone or sim you can wave both showing. And have you checked to see if you go the right message centre number in the phone for you service provider you should be able to check the message centre setting on the web for your provider. I could receive text myself but not send.the message centre number was wrong for me change it now works fine hope it helps .
Sent from my GT-I9000 using XDA App
Bladerunner101 said:
Alright have you tried in contacts then go to settings then hit more then display setting and you can pick how the phone show contacts phone or sim you can wave both showing. And have you checked to see if you go the right message centre number in the phone for you service provider you should be able to check the message centre setting on the web for your provider. I could receive text myself but not send.the message centre number was wrong for me change it now works fine hope it helps .
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
In the contact settings it shows only the phone option,i've checked that before.
And in the message settings it doesn't have the "Message center" option.
My Galaxy is a M110s,the Korean version.
I think it needs a fix or something.
nobody knows ?
Hi mates
i must be send a blank sms for a number , but i cant send because if without
any txt send button not work for sending blank sms, i can use spacebar for
send a sms with one space character but its not agree able , the massege
must be blank without any character.
can any1 help me to do that ?
tnx
no any solution for this blank sms on android ?!!!!!!
I have one, dont send any sms, and you all done .
More seriously i'm not sure your provider will allow a 0bit sms, if it was possible.
Can you say why you need to send it? It seems odd but I suppose there must be some logic to it.
Lucky draw, subscription, etc. I suppose.
I never knew it's possible though.
ttf said:
I have one, dont send any sms, and you all done .
More seriously i'm not sure your provider will allow a 0bit sms, if it was possible.
Click to expand...
Click to collapse
very good and smart solution,hahaha
why u need to send blank sms?change filmware and see,
aadis said:
very good and smart solution,hahaha
why u need to send blank sms?change filmware and see,
Click to expand...
Click to collapse
cause some services need to send a blank (NULL) message to the carrier to receive updates such as credit in your card.
You can send empty sms with your enter key (default samsung keyboard). Just pres enter and send.
but on clean ICS or JB instalation you dont have enter key.
I'm running Temasek's KANG RC3-110 with ETaNa kernel (hoc) but I've had this issue for some time. When I try to send a MMS and hit the send button the message dissappears and nothing happens. Then if I go back to main SMS screen and enter the thread in which the mms should be it is just like before hitting "send" - the attached image is displayed along with all the options and the inserted text.
The question is where does the source of this issue lay and how to fix this.
xswistaqx said:
...
Click to expand...
Click to collapse
Okay, I definitely have the same problem as xswistaqx has.
I create an MMS, press the send button, it disappears, nothing happens and when I get back to the messages again, my unsent MMS appears as a draft - it's very annoying!
My device: P990, CyanogenMod-7.2.0-RC3-p990
Any suggestions?
paleee said:
Okay, I definitely have the same problem as xswistaqx has.
I create an MMS, press the send button, it disappears, nothing happens and when I get back to the messages again, my unsent MMS appears as a draft - it's very annoying!
My device: P990, CyanogenMod-7.2.0-RC3-p990
Any suggestions?
Click to expand...
Click to collapse
+1
so am i with gueste hybrid 3.3 & temasek kernel. changed bb (from 218 to 725) and reflash rom. now mms are sent. for now. http://forum.xda-developers.com/images/smilies/confused.gif
Is your data enabled? Are your APN's configured the right way?
Go to Settings --> Wireless & networks --> Mobile Networks settings and tick "Data Enabled".
Then go to "Access Point Names" and you should have a list of APNs. One of them must have something like MMS in its name.
I can't tell you anything else, because I don't know what country you are in, neither do I know your mobile network provider...
If it was for the APN settings it simply wouldn't be sent instead of "disappearing" and then appearing as a draft.
Factory wipe/reset and rom reflash fixed the issue for me.
I have a problem with send SMS from standard app. ( Messages from Google ). If I want to send a new SMS to a new contact / number, application send the text with default SIM no. 2.
I want to make default SIM no. 1 !!!
How can I do this? Is no option in settings about SIM management or in application Messages, to set default SIM no.1
I have MIUI 11.3.4.0 Global Stable ROM for Mi 9 Lite [V11.3.4.0.PFCMIXM]
I know that if I press the right arrow I can access a menu with SIM 1 or SIM 2 from which to send the message, but in rushes situations I forget to do so and all the SMS are sent by SIM 2 and with money charges.
Please look at the attachment,,,
Please help me...