Wifi stop working after flashing lineageos 16. - Galaxy S5 Mini Q&A, Help & Troubleshooting

Hello everyone, i’m kinda new here so i don’t really understand the «*Android language*» if i can say it.
Yesterday i realisted that my phone (Galaxy S5 Mini SM-G800R were too slow and i wanted a new rom, i was on my stock rom so i told my mom cause i don’t have pc to lend me her pc. I rooted my phone and installed TWRP. After this i downloaded thru my phone Opengapps 9.0 ARM Pico (99 MB) and Lineageos 16 for SM-G800F (400... MB) I downloaded Another Android Pie (CrDroid) (400....MB) After this i went to recovery mode and i wiped cache and i installed lineageos and opengapps, after i boot the phone and it took like 5 min and it bring me back to TWRP i don’t really know why but i just flashed CrDroid and GApps after this i booted the phone to system again and it worked fine! The wasn’t lagging anymore but it was worst it was crashing even if it was charged, i did setup without wifi cause there was no wifi so after it i decided to get stock rom back with odin3. So i downloaded it and still no wifi and the wifi list. I tried to format cache data and more reinstall but still nothing i don’t know if i should download Spooky Kernel to fix it i’m lost i really need help
Thanks to every people that help me or reply, idk if my phone is dead but my parents wont accept to buy another until the end of the years.

Do you happen to still have a copy of the TWRP you were able to flash onto your G800R? I've been looking for a working one forever now. Or if you have a link to the source you got it.
In the meantime I'll see what i can figure out about your wifi issues. Thanks in advance !

Tyler77 said:
Hello everyone, i’m kinda new here so i don’t really understand the «*Android language*» if i can say it.
Yesterday i realisted that my phone (Galaxy S5 Mini SM-G800R were too slow and i wanted a new rom, i was on my stock rom so i told my mom cause i don’t have pc to lend me her pc. I rooted my phone and installed TWRP. After this i downloaded thru my phone Opengapps 9.0 ARM Pico (99 MB) and Lineageos 16 for SM-G800F (400... MB) I downloaded Another Android Pie (CrDroid) (400....MB) After this i went to recovery mode and i wiped cache and i installed lineageos and opengapps, after i boot the phone and it took like 5 min and it bring me back to TWRP i don’t really know why but i just flashed CrDroid and GApps after this i booted the phone to system again and it worked fine! The wasn’t lagging anymore but it was worst it was crashing even if it was charged, i did setup without wifi cause there was no wifi so after it i decided to get stock rom back with odin3. So i downloaded it and still no wifi and the wifi list. I tried to format cache data and more reinstall but still nothing i don’t know if i should download Spooky Kernel to fix it i’m lost i really need help
Thanks to every people that help me or reply, idk if my phone is dead but my parents wont accept to buy another until the end of the years.
Click to expand...
Click to collapse
Did you wipe system and data in TWRP before flashing LineageOS 16? You didn't mention it in the post.
It's strange though that even on stock ROM you didn't have wifi, did you download the right firmware? I haven't found anything useful on sm-g800r firmware other than this tool: https://samfirmtool.com/
I didn't test this tool, use at your own caution, looks promising though.

Related

Does anybody have the original LG L70 [D320] stock rom?

so i've installed nought about some months ago, and its started slowing down, wouldnt run apps, compatibility problems, cant root or install xposed. and i'd really like to get back to my stock rom. i uninstalled the stock rom backup because i needed space (i know im an idiot.) any help would be appreciated. thanks.
EDIT: i found something, its europe open (has no clue what it means,) which i hope will work because i am from europe. wish me luck!.
welp, im back. seems to be installing "D32010c_00.kdz". its 876 mb. found it on a site called lg-roms. you all think this is real? well, ill risk it.
its done downloading, just got lg flash tool, It's time.
my pc crashes when i enter adb mode on my phone, so im stuck here.
I got it working , it's now on stock again and i used the laf-d320n.img file and d32010c_00.kdz, i needed to enter fastboot to restore the laf though because my phone wasnt detected when it was turned on (i ran lineageOS 14.1 nougat nightly with usb debugging problems). so, i guess there is a solution now. (if there wasnt already)

Problem with lockup / display not turning on across various roms, rooted droid

I successfully rooted my droid (that came with lollipop), using this guide
https://forum.xda-developers.com/droid-turbo/general/guide-how-to-unlock-bootloader-install-t3292684
installed twrp backed up the stock OS and installed resurrection remix lollipop rom. I did not install any different modems or radios as I planned to stay on lollipop.
Everything worked great yet after a day or two the display/phone would appear to lock up. I can press power, the display doesn't come on and when (usually) moving the the volume up/down I do hear sounds. Sometimes at this point it will reboot by itself, other times I have to reboot it.
When it comes up it goes through the android is upgrading thing, and sometimes works fine after, sometimes not, regardless eventually this problem repeats.
Thinking it was perhaps RR I tried straight Cyanogenmod, and eventually the rooted stock OS, both have this same problem.
I've tried using it with very minimal installed in the way of apps, same issue.
I've tried saving the log to SD to peer at later, but going through it I don't really see anything obvious to show what the problem is.
I"m wondering if there's a problem with the phone itself (it's a refurb) and am considering unrooting it and returning it.
Anyone seen this or thoughts on what might be the issue?
p.s.
if you happen to have a good link handy to an unrooting guide you might shoot it my way thanks.
thanks in advance!
What versions of the other ROMs did you use? Lollipop also, or Marshmallow? Nougat? For rooted stock ROM did you upgrade to Marshmallow? None of the Lollipop ROMs are supported anymore, so hard to answer for those.
There are ways to grab logs after a reboot, but here's another suggestion...
I use Auto Reboot app (needs root) to schedule a reboot my phone every day while I'm asleep.
This seems to keep the cobwebs cleared out, so the phone runs better. I know you want to find the issue, but maybe it's an accumulation of apps not releasing RAM orb something. This might help prevent that.
thanks for the reply
ChazzMatt said:
What versions of the other ROMs did you use? Lollipop also, or Marshmallow? Nougat? For rooted stock ROM did you upgrade to Marshmallow? None of the Lollipop ROMs are supported anymore, so hard to answer for those.
Click to expand...
Click to collapse
I tried the last released CM lollipop snapshot, as well as the last nightly.
For RR it was last released, "ROM OS Version: 5.1.x Lollipop"
ChazzMatt said:
There are ways to grab logs after a reboot,
Click to expand...
Click to collapse
Yeh I've been saving it to the SD so I can view it after a reboot, I've looked at 4 or 5 of them after the problem occurred and at least to me nothing really stood out
ChazzMatt said:
but here's another suggestion...
I use Auto Reboot app (needs root) to schedule a reboot my phone every day while I'm asleep.
This seems to keep the cobwebs cleared out, so the phone runs better. I know you want to find the issue, but maybe it's an accumulation of apps not releasing RAM orb something. This might help prevent that.
Click to expand...
Click to collapse
Yeh I expect it might periodically need a reboot but if it's just unpredictiably locking up or rebooting on its own it's not very usable.
I think I'm just going to have to try to unroot and return, maybe I'll go with a LG V20 as I don't want to have pay to re-root another one of these and possibly have same issue. Also the whole pay to have some app do something secret to my phone does leave me a bit uneasy.
Kind of a bummer as I'm actually pretty impressed with this device, fast, good battery, takes nice photos, only drawbacks for me are no removable SD and lack of LED notification, but I was willing to live without those given how good everything else was.
thanks
Same here,
I tried with different Roms 7.X, still blocking and display not turning on.
I'd appreciate some help.
Thanks!
Android Version: 7.1.2
Current Rom: AOKP
Kernel: 3.10.107-Stock-bhb27-nougat-kerneL
MrN00b said:
Same here,
I tried with different Roms 7.X, still blocking and display not turning on.
I'd appreciate some help.
Thanks!
Click to expand...
Click to collapse
FWIW and in case it helps you or someone else, I seem to have fixed mine finally, here's what I did.
First I installed latest twrp (mod 4) https://androidfilehost.com/?w=files&flid=39562 (there's a thread on this twrp if you want tor read on it). That in itself didn't fix the issue but did finally let me format and got rid of an 'mkfs.f2fs: invalid option -- r, ERROR=1' type error I used to get.
I installed this stock zip from twrp as described in thread:
https://forum.xda-developers.com/droid-turbo/development/rom-su4tl-49-100-stock-t3390041
It would never actually boot it would shut my phone off not long after showing the boot screen, and I'm not sure if doing that was necessary or not.
Taking some suggestions from here:
https://forum.xda-developers.com/droid-turbo/help/help-request-custom-rom-phone-unlocked-t3767070
I dug up the last official CM 13 snapshot:
https://www.google.com/search?q=cm-13.0-20161221-SNAPSHOT-ZNH5YAO3Y5-quark.zip
sha1: 9a219dd487c27e51b0c5c4922812838f394099c5
Wipe and installed with no gapps and voilà it would boot consistently. Without reinstalling I tried installing pico gapps and it would still boot though it took maybe 15 mins initially.
I want Nougat so I wiped and installed lineage-14.1-20180612-UNOFFICIAL-quark.zip from https://forum.xda-developers.com/moto-maxx/development/rom-t3494646 again no gapps and it also booted fine, whereas previously it would hang on booting. Without reinstalling ROM I tried installing opengapps nano and it would just hang.
I could then no longer get it to boot again, so I reinstalled CM13 no gapps, which booted fine, wipe and install lineage-14.1-20180612-UNOFFICIAL-quark.zip no gapps, and now it boots fine though currently it's taking a while.
I should perhaps note I took twrp backups inbetween steps whenever I had a working boot, (ex before installing gapps), but once the phone went back to hanging on boot, those restores didn't help. Only reflashing CM13 seemed to clear things up.
My ultimate goal is a LOS ish Nougat/Oreo ROM with no gapps using microg, and running tmobile, I'll see what I end up with.

[ROM][XZ][P][9.0][WEEKLY]OmniROM

XZ/KAGURA/F8331 OmniROM BUILDS
PIE 9.0
DOWNLOAD WEEKLY
REQUIREMENTS TO SUCCESSFULLY FLASH OMNIROM:
1. The device has the latest stock ftf
2. The device has an unlocked bootloader
3. The ODM image zip (version 9) has been downloaded from HERE, and the ODM image has been extracted from it
4. The WEEKLY zip file has been downloaded and copied to the device
INSTALLATION INSTRUCTIONS:
1. Reboot device to fastboot mode, and flash the ODM image with this command
Code:
fastboot flash oem <ODM image>
2. Reboot device to TWRP and flash the WEEKLY zip file
3. (If coming from an 8.1 ROM) Fix /dsp SELinux labels with the dsp-label-fixer.zip
4. (Optional) Flash a gapps package
5. Reboot device to system
CURRENT ISSUES ON OFFICIAL:
1. Device wakes up by itself every 5 seconds, reason unknown
2. Camera quality is suboptimal
KERNEL SOURCE: https://github.com/omnirom/android_kernel_sony_msm/tree/android-9.0
BUG REPORTS
REPORT BUGS ONLY:
- AFTER A CLEAN INSTALL
- USING STOCK OMNI KERNEL
- NO MODS OF ANY SORT
OMNI GERRIT REVIEW
https://gerrit.omnirom.org/
DISCLAIMER:
No one is responsible for any damage done to your device but YOU. You've been warned.
XDA:DevDB Information
[ROM][XZ][P][9.0][WEEKLY]OmniROM, ROM for the Sony Xperia XZ
Contributors
oshmoun, humberos, local__hero
Source Code: https://github.com/omnirom
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: latest stock ftf
Version Information
Status: Beta
Created 2019-03-17
Last Updated 2019-05-31
Thank you for the separate this from the other pie roms.
I will flash it after I arrive home.
Thank you all for the hard work!
Sent from my kagura using XDA Labs
I'm loving the fact Omnipie is official. I will be flashing this right now. Thank you so much.
Finally flashed! been using it for less than an hour, i can say that its definitely good for daily use. Camera seems better and hasnt crashed yet (like it use to), mic actually picks up audio properly, brightness slider is finally proportional to the brightness level, and its pie
however, the stereo speaker seems to muffle at high volumes (especially with the ringtones and less with youtube, but still a little prevelent), app opening times seem a little longer than 8.1, and 120HZ still doesnt work
im also curious why the linked odm isnt the latest one (im pretty sure the latest is 1st march not feb)
anyways, thanks dev! (may be editing this thread after more use for battery etc)
XxperexX said:
however, the stereo speaker seems to muffle at high volumes (especially with the ringtones and less with youtube, but still a little prevelent)
Click to expand...
Click to collapse
Could it be this kernel bug: https://github.com/sonyxperiadev/bug_tracker/issues/336 ? Looks like the sonyxperiadev team is working on it.
XxperexX said:
im also curious why the linked odm isnt the latest one (im pretty sure the latest is 1st march not feb)
Click to expand...
Click to collapse
The March 1 release says "Android 8.1", the linked one looks like the latest for Pie.
sinivalas23 said:
Could it be this kernel bug: https://github.com/sonyxperiadev/bug_tracker/issues/336 ? Looks like the sonyxperiadev team is working on it.
The March 1 release says "Android 8.1", the linked one looks like the latest for Pie.
Click to expand...
Click to collapse
Ah, your correct it does say 8.1 my bad
opps
I saw this version from delta updater (using 8.1 omni) and immediately downloaded flashed oem for pie and downloaded omni 9 but it stucked new omni animated logo. Waited like 10 minutes but nothing happened then rebooted phone but same thing happened. Should i wait more or something went wrong?
Im here with OmniROM freshly flashed trough Open Delta.
I have some problems. First boot never ends, BUT restart worked for me but I have another problem.
Now I need 10 min to unlock the phone when Im lucky.
I unlock with the code and then its instantly relock and it say I cant use fingerprint for first unlock, so I use code again and not work again and still can't use fingerprint.
I do this A LOT OF TIME before I can use my phone. Sometimes it helps sometimes not if I not unlock my phone but use corner dial icon first and then if its ask for code i use it and then I got SystemUI crash error again and again and again.
As I said I try to repeat this methods for like 10 min after every restart. I tried to delete some maybe not compatible apps with this new update but still nothing. Now I will remove some Magisk modules. I will write again.
KikiGames said:
Im here with OmniROM freshly flashed trough Open Delta.
I have some problems. First boot never ends, BUT restart worked for me but I have another problem.
Now I need 10 min to unlock the phone when Im lucky.
I unlock with the code and then its instantly relock and it say I cant use fingerprint for first unlock, so I use code again and not work again and still can't use fingerprint.
I do this A LOT OF TIME before I can use my phone. Sometimes it helps sometimes not if I not unlock my phone but use corner dial icon first and then if its ask for code i use it and then I got SystemUI crash error again and again and again.
As I said I try to repeat this methods for like 10 min after every restart. I tried to delete some maybe not compatible apps with this new update but still nothing. Now I will remove some Magisk modules. I will write again.
Click to expand...
Click to collapse
you need to do a full wipe before upgrading to p
Just as @oshmoun said; before flashing new ROMs, it's imperative to do full wipe (if you don't want to lose all your data, then do a full backup in TWRP), as flashing without full wiping can cause TONS of problems. Don't be lazy and follow the instructions properly.
oshmoun said:
you need to do a full wipe before upgrading to p
Click to expand...
Click to collapse
I used the same rom before but the last update. I updated through OpenDelta.
Hello !
It's cool to see our XZ is alive !
I have some problems with this rom after a full wipe and update to oem V6 :
- no sounds during calls, no mic, no earphone, no sounds on speaker
- Magisk 18.1 not working
- With official camera app, while using the flash, only the autofocus led is lit, the second and much powerful led is never triggered resulting on dark shots
For now that's all
Thx
Performance is somewhat distressed and the camera does not work for the sound is not working after restarting the device is improving
KikiGames said:
I used the same rom before but the last update. I updated through OpenDelta.
Click to expand...
Click to collapse
you cant do that. its pretty misleading having it available on that opendelta ota thingy. you have to follow the instructions in this thread
Flashed data, cache and dalvik, factory reset. And installed latest nightly with gapps and magisk 18.1.
Only reason I did it this way is because I was on a unofficial build on Omni. Everything is working as it should. Very snappy and no lag. Still have to see how the ROM handles after it's settled for a couple day, but right off the bat it's amazing. Thank you very much Dev, and happy to see you back on XDA.
XxperexX said:
you cant do that. its pretty misleading having it available on that opendelta ota thingy. you have to follow the instructions in this thread
Click to expand...
Click to collapse
Why this ROM showed up as an update then?
I just don't understand it.
Nevermind this is my main and only phone and I work 4 days straight before I can use my PC so I need to use this ROM buggy for me. :/
KikiGames said:
Why this ROM showed up as an update then?
I just don't understand it.
Nevermind this is my main and only phone and I work 4 days straight before I can use my PC so I need to use this ROM buggy for me. :/
Click to expand...
Click to collapse
You need a PC to flash this. Follow all steps in order and it'll work. Always remember, unless you have a messaging app that backups texts, you will lose them flashing a cfw. Always always backup anything you don't want to lose.
---------- Post added at 12:56 AM ---------- Previous post was at 12:28 AM ----------
I've had a reoccurring issue on the unofficial and official builds so far. I do not have the option to use my phone when calling unless speaker phone or a Bluetooth headset. I cannot put the phone to my head and use normally. Is there any kind of option to fix this nuisance. Any feedback is truly appreciated
Every 9.0 ROM I ever flash, I always seem to have the same problem. Whether its dirty flashing, or starting with flashtool, to CMD, and then to TWRP, the same problem seems to happen. After the ROM has settled, audio quality through calls becomes a huge problem. I'm not sure if I'm doing something wrong, but it has been a persistent bug, next chance I get for the next nightly ill send a logcat, kinda cant not since back on stock. I need good call quality for work lol. Either way, thank you for bringing OMNI to 9.0 official
anyone having problems with video playback? videos dont play on instagram, youtube or snapchat. using magisk 18.1 and latest omni 9 rom
edit: nvm, found out that the Google camera fix module for magisk was the problem

I need help - Moto E5 Plus (hannah) XT1924-8

So I have a Moto E5 Plus (hannah) XT1924-8
and I'm in a jam.
I'm new to moto phones I just moved over to this phone 4 days ago from my HTC M9 yeah I have been a HTC guy for a long time.
My stock rom is fubar, when it boots up I get that encrypt storage thing & reset phone etc.... (no password box) but reset phone is not fixing it.
The boot loader is unlocked
& my twrp is on twrp-3.2.3-0-hannah.img got it from twrp.me
So my problem is that I want to re-flash my stock rom but "Lenovo Moto Smart Assistant" witch did worked 4 times this week but now does not want to work anymore.
It comes back at me with "this device is not supported" & that is not true.
So Now I can't get back to stock & I have not been able to get any custom rom to work me as well.
So my ?s to all of you:
Is there some kind of fix for the "Lenovo Moto Smart Assistant"?
and if not then where do I get a copy of the stock rom & some info on how I should go about installing it
and yes I have the newest adb all installed & I think I have the right driver installed "Motorola_Mobile_Drivers_64bit_v6.4.0.msi" Motorola ADB Interface 7/7/2013 v2.0.2.0
Any help will be much appreciated
Also is the phone default encryption getting in the way of me installing Lineage 15.1 or Bootleggers ??
When ever I try to installing a custom rom I get the dreaded 'To Start Android, Enter Password'
also in twrp /data does not mount when ever I booted into twrp, I had to change the format from ext4 to exfat & then change it back to ext4, from that point on it mounts no problem.
My HTC m9 phone did not have encryption on so I'm not use to working around it.
Well I'm going to return this thing & stay with my HTC m9 with only a 10% working battery.
It seems that no one is going to help me.??
there might be reasons why people wouldn't respond
1. this board isn't active like you'd expect it to be
2. there's already threads out there to save yourself from this
anyway, on twrp, you'd need to FORMAT data to have it de-encrypted... and you'd need to flash a certain boot image that prevents it from auto-encrypting, which is in one of the threads. you'd also never would want to use the smart assistant, because as you can see, it won't work. i don't know if there's a stock rom for your variant, so i can't really link you to yours, but getting it from the moto assistant isn't ideal, it's better to get it from here on the forums or something.
so, in order to install a custom rom, flash the boot.img that doesn't have encrypt, and then flash the gsi system image, and then flash magisk in twrp.
There should already be a thread with the xt1924-8 stock firmware in here somewhere just gotta search. If not I'd suggest trying to re-flash the stock recovery and boot images if you have those and then just try to do a recovery from within.
well I already returned it.
I did read many many many guides on here & on other websites before asking for help.
most of them did not say anything about the book.img to turn off the auto-encrypting.
again I never had to work around auto-encrypt before.
Also @wihzard
I did look for a stock rom for (hannah) XT1924-8 but did not find it.
anyways I returned it & now I'm looking for a unused M9 to replace my old one,
I will end up putting LineageOS 16.0 on it.
Thanks for replying
my moto e5 plus is bricked im pretty sure ...any help anyone?
E-TARD_The_LifeCaster said:
well I already returned it.
I did read many many many guides on here & on other websites before asking for help.
most of them did not say anything about the book.img to turn off the auto-encrypting.
again I never had to work around auto-encrypt before.
Also @wihzard
I did look for a stock rom for (hannah) XT1924-8 but did not find it.
anyways I returned it & now I'm looking for a unused M9 to replace my old one,
I will end up putting LineageOS 16.0 on it.
Thanks for replying
Click to expand...
Click to collapse
………………………………………….
I need help as well haven't had much time to get on here and try to get help. I have the XT1924-7 varriant. I had discovered a hidden network that was placed on there by an ex to track me. So I factory reset I had AEX pie installed on it. Come to find out factory reset didn't even get ride of had to follow some extra steps to erase partitions that weren't wiped during the reset with TWRP. So my problem is once booted and going through setup process these pop up start popping up(screen shots below)the first is the modem keeps stopping. I get that about 25 times of hitting ok then I get one last one stating internal error need to factory reset. IVE DONE THAT COMPLETELY DELETED IT ALL RESTORED ALL. I've flashed NON-HLOS alone withe the erase modem 1&2. And still I've done diffent methods of trying to restore and get nowhere. Any help would be appreciated

Is it possible to disable force encryption, and enable the secret 120Hz mode?

I'm running the CrDroid 5 rom, and I dislike the force encryption, I've tried a force encryption disabler and hacking Magisk to disable force encryption even with encrypted data detected, but it hasn't fixed the issue. (I've found a disabler that works)
I also heard about the hidden 120Hz mode the phone has from here https://www.xda-developers.com/sony-xperia-xz-premium-hidden-120hz-screen-mode-razer-phone/
Under the update, it's mentioned that this phone also has it too, and I'm wondering if anyone has been able to enable it, and if it's possible, how
asdf2345 said:
I'm running the CrDroid 5 rom, and I dislike the force encryption, I've tried a force encryption disabler and hacking Magisk to disable force encryption even with encrypted data detected, but it hasn't fixed the issue.
I also heard about the hidden 120Hz mode the phone has from here https://www.xda-developers.com/sony-xperia-xz-premium-hidden-120hz-screen-mode-razer-phone/
Under the update, it's mentioned that this phone also has it too, and I'm wondering if anyone has been able to enable it, and if it's possible, how
Click to expand...
Click to collapse
What exactly is force encryption messing up on your phone?
MDomokos said:
What exactly is force encryption messing up on your phone?
Click to expand...
Click to collapse
I just don't like it, I also found a disabler that works, so I'm not worried about it anymore
I see its an older post now asdf2345 . But could you share the tool you used to disable the force encryption. I freakin hate it specially because its been "forced" Just replaced my xperia Z5 Compact with a 2nd hand XZ1 Compact after 6 years yes.... LOL Its rooted with magisk and installed twrp latest for xz1c. all works fine but i dont want the "forced encryption" at all . On my windows 10/11 laptops i already disabled these idiot features so the installer not even bother to set it up by default. My old z5c was on android 7 i really liked it, no additional wasted partitions for system ROM images and so forth. I tried many methods, in fact if i haven't reflashed this poor bugger 10x by now.... This was my main reason i longed as much on old system7, i am google less rooted . Forced encryption is messing up a lot of my things just being there.
AssimilatorX.System said:
I see its an older post now asdf2345 . But could you share the tool you used to disable the force encryption. I freakin hate it specially because its been "forced" Just replaced my xperia Z5 Compact with a 2nd hand XZ1 Compact after 6 years yes.... LOL Its rooted with magisk and installed twrp latest for xz1c. all works fine but i dont want the "forced encryption" at all . On my windows 10/11 laptops i already disabled these idiot features so the installer not even bother to set it up by default. My old z5c was on android 7 i really liked it, no additional wasted partitions for system ROM images and so forth. I tried many methods, in fact if i haven't reflashed this poor bugger 10x by now.... This was my main reason i longed as much on old system7, i am google less rooted . Forced encryption is messing up a lot of my things just being there.
Click to expand...
Click to collapse
I've forgotten where I got it from, but I still have the file.
asdf2345 said:
I've forgotten where I got it from, but I still have the file.
Click to expand...
Click to collapse
Very kind thank you. I was searched far n wide on the net. find lots of similar things, however they either wasnt for sony or specified strictly for xxxxx devices LG, ASUS,OPPO etc etc. You still have xz1c G8441? I tried out Havoc-OS 4.8 works really well but i missed sony camera, and my call recorder "ACR Pro" wasnt working properly. Than i had to find out that flashtoop always gives a null error while flashing roms and i had to find again new softwares "newflasher" to do the job. Thanks again will try it out. What i should kow about it? Flash wipe /data/ i assume, I am on TWRP 3.3.1.0
Forgot to mention that my device running on stock kernel with flashed drmfix. Update ... After a bit of messing around it worked. Its not encrypted now. Flashed factory UK stock 228 because it went to bootlooping than twrp 3310, and this time i flashed bliss rom 12.12 android 10 for lilac. Flashed the file you sent me and flashed magist 23. First boot went to recovery. So i assumed , it want a factory reset so i did one. than all fine. Now i just need to go in my bank to unlock my barclays banking app as i installed it about 25x in the last few days. Thank you again for the fast response and help asdf2345. Will se in a few days how this rom fares, but appears to be the best so far, even has sony camera app built in, and i am using it without google or gapp spyware.
AssimilatorX.System said:
Forgot to mention that my device running on stock kernel with flashed drmfix. Update ... After a bit of messing around it worked. Its not encrypted now. Flashed factory UK stock 228 because it went to bootlooping than twrp 3310, and this time i flashed bliss rom 12.12 android 10 for lilac. Flashed the file you sent me and flashed magist 23. First boot went to recovery. So i assumed , it want a factory reset so i did one. than all fine. Now i just need to go in my bank to unlock my barclays banking app as i installed it about 25x in the last few days. Thank you again for the fast response and help asdf2345. Will se in a few days how this rom fares, but appears to be the best so far, even has sony camera app built in, and i am using it without google or gapp spyware.
Click to expand...
Click to collapse
Yeah, I hate that because the device is treble, you gotta reinstall the original ROM to flash a new ROM, so you always gotta start fresh and unnecessarily wear out the flash. I currently use the Resurrection Remix Oreo ROM by hockeymikey.
Will try set fingerprint later as it makes it much easier to unlock and log-in to paypal and banking apps, but hope it would still unencrypted. Also would be nice to get rid of the [system image] 5000mb and [vendor image] 1500mb partitions that just a waste of storage. My old z5c didnt have these useless things on android 7.0
AssimilatorX.System said:
Will try set fingerprint later as it makes it much easier to unlock and log-in to paypal and banking apps, but hope it would still unencrypted. Also would be nice to get rid of the [system image] 5000mb and [vendor image] 1500mb partitions that just a waste of storage. My old z5c didnt have these useless things on android 7.0
Click to expand...
Click to collapse
Yeah, that's how I have it. I wish I we could get rid of the image partitions as well. I thought it was because of treble, but my non-treble XZ also has those as well, so I dunno.
AssimilatorX.System said:
Forgot to mention that my device running on stock kernel with flashed drmfix. Update ... After a bit of messing around it worked. Its not encrypted now. Flashed factory UK stock 228 because it went to bootlooping than twrp 3310, and this time i flashed bliss rom 12.12 android 10 for lilac. Flashed the file you sent me and flashed magist 23. First boot went to recovery. So i assumed , it want a factory reset so i did one. than all fine. Now i just need to go in my bank to unlock my barclays banking app as i installed it about 25x in the last few days. Thank you again for the fast response and help asdf2345. Will se in a few days how this rom fares, but appears to be the best so far, even has sony camera app built in, and i am using it without google or gapp spyware.
Click to expand...
Click to collapse
plz give me drmfix script?

Categories

Resources