Chinese bmw headunit - Android Auto General

Hi all, new to this ive a chinese bmw headunit, been working fine sadly defaulted back to factory dont know pin code tried loads from the net.Supplier not replying to emails. Any advice or support welcomed.
System: HLA_V2.16.190110
Android version: V1.0.2.0625_evo
MCU version: BMW_V4.0_0624
CAN version: BMW_V3.00-20181225-2110

Related

*******O2 XDA IIi failed to update Chinese ROM*******

Hi, pals! I have an XDA IIi-PH10C with the original ROM as followed:
ROM Version: 1.11.00WWE
ROM date: 01/27/05
Radio version: 1.00.00
Protocol version: 1337.39
ExtROM version: 1.11.162WWE
Yesterday I downloaded the newest ROM from O2 website and updated to 1.11.171WWE successfully. Today I thought why not update a Chinese ROM, so I downloaded the CHT ROM from this link:
ftp://ftp.xda-developers.com/Alpine...00_SHIP/AP_DOPOD_CHT_11106_110_10200_Ship.rar
I followed the instructions carefully but right after the program had checked the device information and I click 'Update' buttom, the program gave me this error message:
'ERROR 120:COUNTRYID ERROR'
The updated had been terminated.
Are there anything wrong with the ROM? I had been thinking maybe the ROM was not suitable with my XDA IIi. XDA IIi was also known as Dopod699, is this the problem? But I knew someone in this forum had updated Chinese ROM successfully. I am really confused now, I would be very grateful if somebody be so kind to share his experience. A million thanks!!!!!!
Chinese language support patch installed
I had been trying servel times, it kept giving me the same error message. So I took a compromise: install a Chinese langage support patch(downloaded from http://www.hi-pda.com).
I think this patch works very well, my XDA IIi displays Chinese characters properly, I can even send a CHS message after I installed PlumSIP. Now I realy enjoy my XDA which has an English ROM and CHS support.
hi mate...u better install a CHN language support and select the region as P.R. CHINA. THEN try2 update again i dun think the prob will occur..
another idea is that u flash the rom rite after a hardreset. but use USB cable to connect the pc in this case...and the device will be syn as a guest and recognised.
hope my answers help.
Thanks
That's a good idea, I will try it later, Cheers mate.
I think I don't have to update CHT ROM right now, becuase WWE ROM with CHN language support is the best solution for me.
进入SERIAL模式,连上USB线,运行MaUpgradeUt_noID.exe。
或直接连USB,先运行MaUpgradeUt_noID.exe,会报错,不要动,再运行一次MaUpgradeUt_noID.exe
有简体的ROM么?
有简体的ROM么?
應該無啦...

HTC Original Rom

Hey Guys,
I know this may sound really stupid, but I've just bought a new AT&T Tilt, and I was looking for the original HTC rom that I can flash on my phone.
I've tried searching the forum, but I couldnt find the original one.
Can someone help me out!
Thanks a bunch in advance!
i think this work~
http://rapidshare.com/files/5781641...dio_sign_22.45.88.07_1.27.12.11_Ship.rar.html
thank you soo much!
Another quick question, that link points to the RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship.rar rom,
my Tilt came pre loaded with the following ROM
ROM Version: 1.57.502.2
ROM Date: 08/25/07
Radio Version: 1.27.12.11
Protocol Version: 22.45.88.07H
Is it okay to flash my phone with the HTC ROM? Or would that be downgrading it? Also, i read somewhere about a bluetooth audio problem with the ROM, is that something to worry about or fix later, after I flash my phone?
Sorry for being a pain in the butt, but i just wanna make sure i do this right the first time.
Thanks!

Radio reception x1 - upgrade?

Hi guys
I have recently got the X1 and I really like it, but the reception at my home in Auckland, NZ, is terrible compared with my previous SE P1i. It is dropping out while sitting still.
Is it possible to upgrade the radio firmware or something? Can you link me to instructions or the right one for me to use??
I am no expert in this, and I did look on the forums without success.
I am using:
ROM: 1.05.949.13
Date: 04/23/09
Radio Version: 1.14.25.55
Protocol: 52.65.25.34w
Extpkg Ver: 1.0.11889.15276
Software version: r3aa013 Generic_Aus pa10
Thanks!!
Vim
All the chat is here (http://forum.xda-developers.com/showthread.php?t=477801), here (http://forum.xda-developers.com/showthread.php?t=532249) and here (http://forum.xda-developers.com/showthread.php?p=4221169). The search tool is a wonderful thing.
Hi,
Thanks, it would appear that a later version is New Xperia Radio 1.16.25.48.
I am willing to try and install this, but I would really appreciate it if someone could offer some clear guidance on this.
I installed Kovsimg already to upgrade the phone previously, but that is the extent of my knowledge.
This thread http://forum.xda-developers.com/showthread.php?t=532249 seems to have the right links for the download. But when I started it, all indications were that my whole ROM would be flashed, and that does not seem right???
Any help would be awesome guys...
Hi again
I found this faq here: http://forum.xda-developers.com/archive/index.php/t-508038.html.
It is brilliant and answered most questions. I just went ahead and let the upgrade go and it just updated my phone radio, and this has improved the signal strength showing straight away.
Cheers.

Fastboot with chinese characters on my Htc One

Hi guys, yesterday i purchased an htc one used from a guy of my town, now i would like to come back stock original to start use it
but i've found that if i try to enter in fastboot i see chinese character, why? what can i do to restore normal characters?
i don't know if the phone it's been modded by the other user, in the info i see:
Version Android: 4.2.1
Version banda base: MOLY.WR8.W1248.MD.WG.MP.V6.P3, 2013/06/04 16:46
Version Kernel : 3.4.5 [email protected] #1
Numero build: 0502H001_20130608
thanks a lot
your htc one smell like fake

Ewaygps mcu? - ew806p6qh

Hi,
I'm looking for my Ewaygps EW806P6QH MCU update files (or any files for that unite). I try to contact with distributor but I think they don't support customers with basic IT, or any support. I try to find it and I didn't so I need to ask you gays.
If you know haw to find it or haw to look for it please let me know. I don't even know what type of MCU is there I saw on youtube that someone have 5.3.18-13-B52-253201-160420 on same unit. What type is that? Do I can install differed MCU on my unite? Haw I can do it? etc.
All this is because I lost all MCU files on my Radio and now I don't know where to find update files to restore normal funciality of my radio.
Processor type: Quad Core-R16
Android version: 6.0.1
MCU ver: Unknown
CAN ver: Unknown
System ver: V7.3.1_20170322.110946_TW2
Thank you,

Categories

Resources