Database Develop

Installing rom on Razr i xt890

hi,
can someone please help.. my phone stopped booting up all of a sudden. I am trying to install this CFC_9.8.2I-50_SMI-29_S7_USASMIJBRTGB.xml which i downloaded from a thread on this forum using rsd lite v6.1.5
I get the following error..
AP Fastboot Flash Mode (Secure boot)
20.25 (sh - dae73d6)
IFWI Info: 42.26
eMMC Info: Size 8GB
Barcode: TA32407FJN
Battery (OKay): 3.70v (temp 37)
Transfer mode : usb connected
Rom-Key: Motorola-Key
Modem Status: Secure
Boot Mode Selection menu
......
Fastboot Reason:
fastboot: max download size: 100MB
USB Connected
Getvar max-download-size
Downloading
downgraded security version
update gpt_main version failed
preflash validation failed for GPT
Fastboot command failed.
Can anybody help? not sure what i am doing wrong. I am a noob.
thanks.

Fastboot loop, "failed for boot", Moto g 4G XT1072

Hello!
Today I restarted my Motorola Moto G 4G XT1072 (2nd gen) because I thought it was slow. I turned it off and on again and surprise! : it boots into fastboot. Here is what the screen displays:
HTML:
AP Fastboot Flash Mode (S)
48.21 (sha-d8d8d9e, 2015-04-29 11:53:52)
CPU: MSM8926
eMMC : 8GB Sandisk RV=06 PV=07 TY=17
DRAM : 1024 MB Elpida S4 SDRAM DIE=4Gb
Battery OK
Device is LOCKED. Status Code : 0
Connect USB Data Cable
Boot Mode Selection Menu
Vol Up Selects, Vol Down Scrolls
Normal Powerup
Recovery
Factory
Barcodes
BP Tools
hab check failed for boot
Failed to verify hab image boot
failed to validate boot image
Fastboot reason: Fall-through from not-charger boot mode
Hitting Normal Powerup or Factory reboots the phone on fastboot again, and Recovery sends me on a black screen with a broken android image (red triangle).
I think I know where this comes from as I rooted my phone last week end to use a file recovering app. I used kingroot and I read today that it was a bad idea...
I've tried installing a new rom following this guide: http://forum.xda-developers.com/mot...e-restore-moto-e-2015-stock-firmware-t3054303 and using this rom : STOCK EU: RETEUALL_XT1072_5.0.2_LXB22.46-28_cid7_subsidy-DEFAULT_CFC.xml.ZIP
But unfortunately, when I type the first command line this happens:
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAT [0.047s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.393s
I tried others command lines and I get others errors such as "Invalid signed image"..
I don't know much about android programming, so I don't know what to do. I searched a lot on the internet but didn't find any solutions. Do you have any idea ? I wish I could solve this problem tonight so I can get a working phone as soon as possible.. Thanks in advance for your time!

I fixed this by unlocking the bootloader : http://forum.xda-developers.com/moto-g-2014/general/wip-unlock-bootloader-moto-g-2nd-gen-t2875728.
Topic can be locked.

Need help, phone is mostly bricked.

On the Moto X subreddit you might have seen my post on how it came to this. Cant post it here though, because I'm a new user.
So here is the stuff copy pasted:
I'll start from the beginning to list what I did to the phone: Also, yes I'm new to this, so I did some dumdums along the way.
-Did the Moto unlock stuff(worked fine)(thanks tutorial, you didn't tell me this would wipe all my data till the end, I was already done by then)
-Installed TWRP 2.7something (the latest that the TWRP site recommended for this phone, worked fine)
-Used TWRP to install SuperSU/Root the phone(worked fine)
-tried installing cyanogenmod (failed, doesn't boot normally)
-reflashed everything to stock(worked fine, boot android 4.2.2)
-android loads updates, installs, fails to boot (bricked)
Here I am this is what my bootloader looks like:
AP Fastboot Flash Mode (S)
30.BE(*) (sha- blahblah
eMMC: 16gGB blah blah
...
Device is LOCKED. Status Code: 0
Battery OK
Transfer Mode: USB Connected
here comes the menue stuff
...
log looks like this:
downgraded security version
update gpt_main version failed
Failed to hab check for gtp_backup: 0x35
CID Read Failure
Invalid CID status 0x69
CustomerID error. Contact Dealer: 0xdead
Fastboot reason Invalid CID
USB connected
my fastboot recognizes the device I'm using the mfastboot v2 The Moto X is bought in EU (should be Moto X 1052)
I tried flashing it the same way I did for the reset, the way I did it before, but that doesn't work. I'm not exactly at the setup I actually used to do that with, I'll be able to try it that way again in 3 hours or so, but my setup should be about the same, cept that I'm using a USB3 connection right now instead of a USB2 (I read that ADB is having some problems there, but not that this is the case with fastboot) I've googled for a lot of solutions, non of them worked for me. I don't know what to do anymore.
Some things that might be of interest
mfastboot oem get_unlock_data
results in:
(bootloader) could not get unlock data! [Okay] finished...
Trying:
mfastboot flash partition gpt.bin
results in:
(bootloader) Variable not supported!
target max-download-size: 768MB
sending 'partition' (32 KB)...
OKAY [ 0.269s]
writing 'partition'...
FAILED (remote failure)
finished. total time: 1.174s
bootloader:
downgraded security version
update gpt_mail version failed
preflash validation failed for GPT
I usually get things done with trying around and normally(on other phones) I have no problem making a TWRP backup finding it! and pulling it from the phone so I can reset it within something like 15 mins, but I wasn't able to find where TWRP stored it's backups in this case, and I didn't care very much, not much on the phone to loose.
Anyone know what I could try?
E: Okay, just noticed that the codes in barcodes are different now:
IMEI/MEID: 0000000000000000
SKU: 000000000000
Serial Number: 13a869f1 (that's not the one it should be!!! My serial number should start with TA.... and not contain any lower case letters)
DATE: 01-01-1970
Click to expand...
Click to collapse
One more thing I did(because I found it in this forum) was mfastboot getvar all and got this back:
Code:
version-bootloader: 30BE(*)
version: 0.5
cpu: MSM8960 Pro CS
ram: 2048MB Samsung S4 SDRAM DIE=4Gb
emmc: 16GB Sandisk REV=06 PRV=07 TYPE=17
product: ghost
revision-hardware: 0x8300
radio: 0x3
secure: yes
mid: 026b
serialno: 13a869f1
qe:
unlocked: Not supported
iswarrantyvoid: Not supported
max-download-size: 805306368
uid: 2EED8B050C000100000000000000
imei: 000000000000000
meid:
sku: 000000000000000
cid: 0xdead
iccid:
date: 01-01-1970
cust_md5:
reason: Invalid CID
ro.build.date:
ro.build.id:
ro.build.tags:
ro.build.type:
ro.build.user:
ro.build.version.codename:
ro.build.version.incremental:
ro.build.version.release:
ro.mot.build.customerid:
ro.product.name:
ro.build.fingerprint:
ro.build.version.full:
kernel.version:
E: And no, I don't have a problem with the serial number showing here, in the getvar all, because as said in the text quoted from reddit, the stuff there is wrong anyway.

I am seeing the same error. Looking forward to any help to OP and me.

Help-me, I Have a Motorola X( 1ª )(XT1058) Bricked and with Debugging USB Disabled

Hello all, first of all apologies for any spelling errors, I have an XT1058 and it has recently downloaded and is looping, the phrase that appears when I enter the fastboot mode is "Boot up failed" and how your USB debugging is disabled I do not know how to recover it, I have tried several programs like RSD Lite and ADB FastBoot however the device is not recognized by the computer.
I can not upload pictures because I am a new member.
What Appears on the AP Fastboot Screen:
AP Fastboot Flash Mode(S)
30.BE (sha-34b7ccd, 2015-04-22 12:57:17)
eMMC: 16GB Sandisk RV=06 PV=07 TY=17
DRAM: 2048MB Hynix S4 SDRAM DIE=4Gb
Up time: 1 Minute
Device is LOCKED. Status Code: 0
Battery OK
Connect USB Data Cable
Boot Mode Selection Menu
Vol Up Selects, Vol Down Scrolls
-Normal Powerup
-Recovery
-Factory
-Barcodes
-BP Tools
---------------------------------------------------------------
Fastboot Reason: Key Pressed
Boot up failed
----------\\--------
Anything I click will return to this screen and appear: Boot up failed

G5S Plus startup failed, Failed to pass validation, Backup to fastboot

Hello Everybody,
I have got into an issue, My G5S Plus startup failed.
What happened :
1. Whatsapp kept on crashing and did not start even after clearing cache and data, And finally uninstalled.
2. After reinstalling, Whatsapp recovered 14% data from existing backup file and then phone switched off.
3. On restart, I see the below information on screen ->
Can anybody help me to start my phone. I need my data as I do not have any Backup of it?
---------------------------------------------------------------------------------------
Bootloader log
Start Up Failed :
Your device didn't start up successfully.
Use the Software Repair Assistant on computer to repair your device.
Connect your device to your computer to get the Software Repair Assistant
AP Fastboot Flash Mode (Secure)
failed to validate boot image
ERROR: Failed to pass validation, Backup to fastboot
Fastboot Reason: Fall-through from charger boot mode
---------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------
BL : C2.12(*) (sha-07***3c, 2018-08-01 17:56:33)
Baseband:
Product/Variant : sanders 000000000000000 64GB P4
Serial Number : 66****99
CPU : MSM8953
eMMC : 64GB SAMSUNG RC14MB RV=08 PV=07 FV=0000000000000007
DRAM : 4GB SAMSUNG LP3 DIE=8Gb M5=01 M6=05 M7=00 M8=5F
Console [Null] : null
Tools Mode Config : DISABLED
Battery OK
oem_locked
Transfer Mode : USB Connected
----------------------------------------------------------------------------------------