Hi.
Since I'm new at this kind of thing I could use some advice from you smart people.
My firmware is still on Froyo, and I have been waiting for an official update on Kies for long time, but nothing happened. So I went checking today if it's available for my country (which is Croatia).
And it seems there have been 2 updates since Froyo: Croatia (T-Mobile) CRO – P1000BOJPD / P1000CROJPA (Android 2.3.3 Gingerbread
and
Croatia (T-Mobile) CRO – P1000BOJQ3 / P1000CROJPA (Android 2.3.6 Gingerbread
Considering I didn't get any update from Kies, I guess my tab hasn't been distributed by T-Mobile.... (i won the gadget on a game, so I can't realy tell for sure where it came from).
So can someone please help me with what firmware I can install by not using Kies?
Is the firmware by T-MOBILE for Gingerbread 2.3.6 usable for me?
The data found on internet for 2.3.6 are different from what I have in my tablet, so I realy need this advice.
Copied from a website for T-MOBILE 2.3.6 update, it says:
GT-P1000CWACRO
PDA: P1000BOJQ3
CSC: P1000CROJPA
Phone: P1000BOJP1
Download: P1000BOJQ3/P1000CROJPA/P1000BOJP1/P1000BOJQ3
And my tablet lists out this:
PCode: GT-P1000CWAVIP
PDA: P1000XWJMK
PHONE: P1000XXJMA
CSC: P1000OXFJM5
(This last three letters on my tabs Product Code: VIP makes me think the provider the tab came from could be VIP.)
Thx for any help I can get.
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
Hi,
I have a galaxy note 9 uk on three network i just updated to the note update and its shocking so i want to reflash my phone on odin but i always get confused on which is which.
Before i flash i copied what my phone said for sofware information:
Andriod version:
8.1.0
Samsung experience version
9.5
Baseband version
N960fxxu2arl1
Build number
M1AJQ.N960FXX52ARL2
Andriod security level
1 december 2018
Please someone let me know which firmware i should be patching
I can see ee and btu versions but no three network version on samsmobile
Thanks
Aaron
faser2033 said:
Hi,
I have a galaxy note 9 uk on three network i just updated to the note update and its shocking so i want to reflash my phone on odin but i always get confused on which is which.
Before i flash i copied what my phone said for sofware information:
Andriod version:
8.1.0
Samsung experience version
9.5
Baseband version
N960fxxu2arl1
Build number
M1AJQ.N960FXX52ARL2
Andriod security level
1 december 2018
Please someone let me know which firmware i should be patching
I can see ee and btu versions but no three network version on samsmobile
Thanks
Aaron
Click to expand...
Click to collapse
HG3 is UK 3 network here your firmware you need to move back to 8.1 https://www.sammobile.com/firmwares/galaxy-note9/SM-N960F/H3G/download/N960FXXS2ARL2/248052/
Thank you so much your a brilliant person sir.
May God bless you abunduntly
Thanks
I am using note 9 at&t . I need to update my phone . I 'm currently living in china . How to update my phone . I don't know my phone is locked or not .
Can anyone share the link of the firmware for updating. My phones android version is on 8.1.0
Product Code: SM-N960UZBAATT
PDA: N960USQS1ARI5
CSC: N960UOYN1ARI5
Baseband: N960USQS1ARI5
Bootloader: N960USQS1ARI5
Sanjaysnjy said:
I am using note 9 at&t . I need to update my phone . I 'm currently living in china . How to update my phone . I don't know my phone is locked or not .
Can anyone share the link of the firmware for updating. My phones android version is on 8.1.0
Product Code: SM-N960UZBAATT
PDA: N960USQS1ARI5
CSC: N960UOYN1ARI5
Baseband: N960USQS1ARI5
Bootloader: N960USQS1ARI5
Click to expand...
Click to collapse
It's easier to convert your at&t to the unlocked version software wise because at&t updates are hard to come by.
Go grab samfirm download tool then download update for
Model: sm-n960u1
Region: xaa
And then flash that update with odin.
hello guys I have galaxy note 9 (SM-N960U) 512GB, I want to change software from AT&T to T-Mobile or Verizon is that possible? because no updates available, please guys help me.
note: I don't wanna change to another brand like SM-N960U1
Darcolmax said:
hello guys I have galaxy note 9 (SM-N960U) 512GB, I want to change software from AT&T to T-Mobile or Verizon is that possible? because no updates available, please guys help me.
note: I don't wanna change to another brand like SM-N960U1
Click to expand...
Click to collapse
Just download the stock Samsung US OS and install that onto your device
Doesn't matter what is used. The firmware will provision to whatever sim you have
Sent from my SM-N975U using Tapatalk
Hello Everyone,
I'm new here. What brought me to this forum was the issue of not getting OTA updates due to using a model imported from another region. My device's CSC is SPR (sprint) but my local carrier works on it just fine. My problem is better elaborated here in this other post :
https://forum.xda-developers.com/t/question-about-flashing-firmware-from-a-different-region.4043665/
After reading the above thread I decided not to change my firmware to the model firmware for my region as its SoC is Exynos and my phone is Snapdragon. However, I still want to use Odin to upgrade the firmware to Android 11 as I'm still stuck on Android 9 (may 2019 update) and I can no longer bear it.
In the post in the above link, a reply recommended using the USA (USC) CSC, so here's my question,
Would updating with SPR (my current CSC) make my phone unable to work with my local carrier on update completion? or should I just update using USC?
PS: The SPR CSC came with no bloatware, I don't know what the USC CSC will come with.
Service provider info is attached below.
Thanks in advance.
Hi there,
I have a Samsung Galaxy Note 9 SCV40 Japan version phone. The Firmware of this phone is N960FXXS4CSK2, CSC is N960UOYN3CSK2, Bootloader is SCV40KDU1BSK2. As far as I know it is mixed. PDA from Exynox model N960F and CSC from Snapdragon N960U and Bootloader is from phone SCV40 Snapdragon Japan.
How is this possible and how can I update my firmware? Please help???
Go to Samfw and download correct firmware for you model and flash with odin.
From what is posted ,the bootloader is bit1 so OP can flash firmware that is bootloader S1 or U1. If OP flashes any firmware that increases the bootloader number he will not be able to downgrade. So any bit1 firmware will work.
Download Galaxy Note9 SCV40 (KDI) SCV40KDU1BSG5 in Samfw - Samsung firmware download
Galaxy Note9 SCV40 (KDI - Japan) SCV40KDU1BSG5 Pie(Android 9) samsung firmware download all model, lastest, fast update, completely free and fast speed in Samfw.com ✅
samfw.com
Thank you all for your response. To clarify further the issue, I bought the phone in Dubai. The shop told me it is used one but only for short time. Originally the phone was from Japan. It is Galaxy Note 9 Model SCV40, KDDI from carrier "au". At first I didn't know it was from Japan, since in Settings, About Phone, Model number says N960F. I only find out later as I tried to update to Android 10. The firmware on the phone is for Exynos variant. But my phone is Snapdragon. I checked with phone info app and cpu-z to make sure. As I mentioned earlier the phone has mixed firmware. PDA N960F, Bootloader SCV40 (Some people say it is N960J) ???, CSC N960U from Snapdragon USA, code GSA, XAA. As you see it is a bit confusing I need help. Can I update only the PDA N960F to Android 10 by using 5 parts firmware and leave the others (bootloader and csc) as it is? Thanks
Sorry for login mix, It is me. Surmam. Thanks
Additional info, if it helps. When I dial *#1234# this is what comes out.
AP: N960FXXS4CSK2, CP: N960FXXS4CSK2, CSC: N960FOXM4CSK2
Dear butchieboy and Arobase40, how are you? You have been trying to help me. I was hoping that you will find solution for my problem. But you stopped replying. I don't know what I said or did. Did I offended you in some way? If so please forgive me it was not intentional. Saying that I have still not found a solution so please help me.
Thanks and God bless you all.
Surmam said:
Hi there,
I have a Samsung Galaxy Note 9 SCV40 Japan version phone. The Firmware of this phone is N960FXXS4CSK2, CSC is N960UOYN3CSK2, Bootloader is SCV40KDU1BSK2. As far as I know it is mixed. PDA from Exynox model N960F and CSC from Snapdragon N960U and Bootloader is from phone SCV40 Snapdragon Japan.
How is this possible and how can I update my firmware? Please help???
Click to expand...
Click to collapse
I have the same problem here please have you gotten a solution?
Asp Asuadon said:
I have the same problem here please have you gotten a solution?
Click to expand...
Click to collapse
is the phone not working properly?
The phone is working perfectly. I just want to update to Android 10 and possibly root my phone.