Related
Stock N7 16GB
I have always thought the touchscreen on my N7 was a bit jittery, but now I have come to realize the problem is far worse than I originally thought. For example:
Load a webpage
Place a finger on center of screen
Rest palm or other finger on left edge of screen
Display starts moving/pinch scaling like crazy, even if I remove any touch from left side of screen and keep only 1 finger on center screen.
Almost all the time the touch on my N7 jitters/moves around a bit which causes issues with swiping. If I place 1 finger in the middle of a web page, it moves around slightly even if my finger isn't moving.
I think for these reasons I will be returning this tablet.
Rob
silverball.slayer said:
Stock N7 16GB
I have always thought the touchscreen on my N7 was a bit jittery, but now I have come to realize the problem is far worse than I originally thought. For example:
Load a webpage
Place a finger on center of screen
Rest palm or other finger on left edge of screen
Display starts moving/pinch scaling like crazy, even if I remove any touch from left side of screen and keep only 1 finger on center screen.
Almost all the time the touch on my N7 jitters/moves around a bit which causes issues with swiping. If I place 1 finger in the middle of a web page, it moves around slightly even if my finger isn't moving.
I think for these reasons I will be returning this tablet.
Rob
Click to expand...
Click to collapse
I'm having issues with the screen too. For me, it seems worst when it boots up. my example was playing Angry Birds Space - I can't control it, then suddenly it releases and (if a bird with an action) performs the action. any known fixes?
i had same problem think i found a fix
I had same problems with my nexus 7 but it started after i installed dead triger i also noticed tablet dosint come with stock file manager so i installed the same game on my asus tf300 and noticed same issues on my nexus i did a factory reset and cant make screen get any dead spots hope this helps you out
I had that once the other day. I had to reboot it was so bad. Almost felt like the tablet was laggy. Hasn't happened again though.
I do have Dead Trigger installed as well, but I haven't played it in a long time.
Hi, I have the phone for a month now, its 4 months old. This problem is on since I bought it.
When I try to slide notifications roll-down panel from the top, it is sometimes almost impossible to do. When I do it with whole thumb, it goes down normally, but when I try with other smaller fingers, it wont respond. Also in chrome, I have problems editing www address bar, because it just wont respond to touch. It responds immediately when the phone is in vertical position and I tap there with my thumb.
Since rest of the screen works fine and that particular area works well in certain conditions, I am wondering, if there is some kind of calibration app or setting for digitizer. Phone has not been dropped down, nor it has scratches or anything on display. I have screen protector and so I assume it can be somehow related to it. I have almost simillar issue with old HTC Touch Pro years back, but there was an option to calibrate touch screen with stylus. So I am just wondering, if someone can advise something to do. I really dont feel like waiting 30 days solving it by dealer.
Nexus 7 responds way better on the edges than my One. Also, bottom edge and sides are working fine.
As I am trying to do this over and over I have noticed, that when I click digitizer in chrome on text in adderss bar, there is no respond, but when I click just a bit above the text, it responds with any of my fingers, So it seems like its moved up or something (if you know what I mean, I can not really explain this any better
123talis said:
Hi, I have the phone for a month now, its 4 months old. This problem is on since I bought it.
When I try to slide notifications roll-down panel from the top, it is sometimes almost impossible to do. When I do it with whole thumb, it goes down normally, but when I try with other smaller fingers, it wont respond. Also in chrome, I have problems editing www address bar, because it just wont respond to touch. It responds immediately when the phone is in vertical position and I tap there with my thumb.
Since rest of the screen works fine and that particular area works well in certain conditions, I am wondering, if there is some kind of calibration app or setting for digitizer. Phone has not been dropped down, nor it has scratches or anything on display. I have screen protector and so I assume it can be somehow related to it. I have almost simillar issue with old HTC Touch Pro years back, but there was an option to calibrate touch screen with stylus. So I am just wondering, if someone can advise something to do. I really dont feel like waiting 30 days solving it by dealer.
Nexus 7 responds way better on the edges than my One. Also, bottom edge and sides are working fine.
As I am trying to do this over and over I have noticed, that when I click digitizer in chrome on text in adderss bar, there is no respond, but when I click just a bit above the text, it responds with any of my fingers, So it seems like its moved up or something (if you know what I mean, I can not really explain this any better
Click to expand...
Click to collapse
Not normal, I woudn't bother caliberating it. Just return it to the store, or try warranty via the htc website.
In my case htc always came to my place to get the phone, and they always brought it back after a week or so.
They have a great service
killerbie said:
Not normal, I woudn't bother caliberating it. Just return it to the store, or try warranty via the htc website.
In my case htc always came to my place to get the phone, and they always brought it back after a week or so.
They have a great service
Click to expand...
Click to collapse
Problem is, that in my country, there is no official service center, thus it has to be sent to our neighbor, and because of that, it takes forever to work it out. I could live with that, if there is no self-help, but I was just wondering whether there is some app or setting or not.
Hi guys.
I got my moto g from one week and i find an issue in touchscreen. When you put the mobile for example on the bed matress then try to press quickly on for example calculator keys (press key 1 for 20 times quickly). I found that after 4 or 5 presses, the touchscreen not respond and it is slow in response. But when i take the mobile in my hand, the touchscreen working perfect. Did any one faced this issue?
Forget something. When put the phone on the bed, dont touch the mobile by any part of your body, just press wirh one finger. I mean only the top of your finger touch the screen on the bed or sofa.
Do any one face this issue and what is the solution?
I think the problem is with your phone or bed.
I did exactly like you said, I put my phone on the bed and opened calculator with only one finger and pressed 1 for 20 times and it didn't lag at all. I didn't touch the phone with any other part of my body other than my finger.
Normally I touch my phone with only from the wrist up which is my fingers. Remember never to touch your phone with anything below the torso.
Thanks for reply. But your phone is moto g 2nd gen?
Please try it with no charging. And also try it on sofa and other surfaces.
Thanks
Please don't plug the charger, usb cable and spesker then try this on bed or sofa or any other surfaces. And also don't forget to dont toych the phone with any part of your body.just only your finger
Thanks
hanyghazal said:
Hi guys.
I got my moto g from one week and i find an issue in touchscreen. When you put the mobile for example on the bed matress then try to press quickly on for example calculator keys (press key 1 for 20 times quickly). I found that after 4 or 5 presses, the touchscreen not respond and it is slow in response. But when i take the mobile in my hand, the touchscreen working perfect. Did any one faced this issue?
Forget something. When put the phone on the bed, dont touch the mobile by any part of your body, just press wirh one finger. I mean only the top of your finger touch the screen on the bed or sofa.
Do any one face this issue and what is the solution?
Click to expand...
Click to collapse
I tried with my Moto G2 , but didn't faced any issue like you mention .I think the problem is in your device, get replace it.
Thanks for reply. The problem that i got this mobile from amazon in us when at a trip in us but now i back to my country and i dont know when i will travel again to us. Need advice
Thanks
hanyghazal said:
Thanks for reply. The problem that i got this mobile from amazon in us when at a trip in us but now i back to my country and i dont know when i will travel again to us. Need advice
Thanks
Click to expand...
Click to collapse
If you have the paper or whatever amazon provided during the purchase, you can contact amazon through their website and then mail to product to amazon. If everything is done properly they should send you another phone which doesn't have this problem.
hanyghazal said:
Hi guys.
I got my moto g from one week and i find an issue in touchscreen. When you put the mobile for example on the bed matress then try to press quickly on for example calculator keys (press key 1 for 20 times quickly). I found that after 4 or 5 presses, the touchscreen not respond and it is slow in response. But when i take the mobile in my hand, the touchscreen working perfect. Did any one faced this issue?
Forget something. When put the phone on the bed, dont touch the mobile by any part of your body, just press wirh one finger. I mean only the top of your finger touch the screen on the bed or sofa.
Do any one face this issue and what is the solution?
Click to expand...
Click to collapse
hi, I have the same problem and i just wanted to know if you have solved it in some way, I think I will try a replacement from amazon, hope i will not get another faulty one
I've had the Motorola moto g 2nd gen for nearly 2 weeks now. I came from a Sony xperia S which I've had since it's launch in 2012.
I love this phone as it's really fast and the interface is really fluid compared to my xperia S.
The problem I have however is that whenever I try to scroll, be it on facebook or on a webpage, the phone thinks I'm clicking instead of actually scrolling. 70% of the time I accidentally click on facebook links or webpage links while my finger was never actually lifted off the screen.
I never had this problem with my sony xperia S. Even though it was slow as hell it still knew whether I was clicking or scrolling. It doesn't matter if I press extremely hard on the screen or lightly. Phone reacts the same way.
Does my phone have a faulty touch screen, or am I just spoiled by my xperia S?
@aolol
Nope, never ever had such problems with mine.
No Scrolling and clicking confusion-issue here
Me thinks somethings wrong with your screen mate. Better get it checked.
And no, the touch response is not supposed to be like that.
I have the same issue and so are several others. Not sure what's causing it.
I also have the same issue, it is really annoying I'd really like to know by what this issue is caused.
I had a screen protector on mine that was causing it, took it off & no more problems. Just a thought...
Sent from my XT1064 using XDA Free mobile app
I Only face this problem whenever my hands are wet with water and still i touch the screen. it clicks where water has left from my hand.
only have this problem when I am not holding the phone (phone on bed/table), it seems the touch screen is not as sensitive as most other phones, on the bright side it also means lower chance of butt dialing (since you need a slide and it is very hard to slide when you are not holding it with your hand..)
Mine does this too - with my finger tip only, near the nail. If I use the flat spot, I don't get so many false touches. I just find it a very sensitive touchscreen.
Anyone else seem to have a problem with the ambient light/proximity sensor on their N6? I've noticed that a lot of times when i make calls, the screen won't shut off when i put the phone to my head... often with that resulting in my cheek touching something, and the person on the other end not being able to hear me. If i leave the phone at an angle against my ear so my cheek doesn't touch the screen, eventually the screen will shut off, but won't come on when i take the phone away from my ear, resulting in me having to press the power button to turn the screen back on.
Had that happen to me yesterday ... Rebooted and it hasn't happened today.
Sent from my Nexus 7 using Tapatalk
I'm having a issue now. Phone call comes in and screen stays on. I did a reboot, factory reset even installed custom ROM. It was working the other day. Anyway to calibrate this thing? Or do we have a bad sensor.
Also now my phone won't rotate screen.
Sent from my Nexus 6 using Tapatalk
Do any of you happen to have a screen protector on? As there have been some users that have been reporting issues with certain screen protectors. I believe most are tempered glass protectors that are the cause of the problems.
I took mine off and still nothing.
Sent from my Nexus 6 using Tapatalk
v4npro said:
I took mine off and still nothing.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Did you try going to settings , accessibility , power button ends call, toggle that on and off.
We own two new Nexus 6 devices that are rooted and decrypted. We have the same issue where the phone screen stays on during a call. Rebooting fixes for a short period (hours or so) but the problem comes back. Other threads show this to be an issue with other phones (nexus 5) with Lollipop. Not sure of a fix. These devices are only a few weeks old so it is not a dust issue.
Having the same issue that just suddenly started. Rebooting does not seem to help.
Happening here too. Frustrating.
My screen turns off when taking the phone to the ear but it doesn't turn on again after i take it away from my ear.
It's pretty bad on my phone. The screen turns on when I am on a call making the notification bar drop down. Also, the phone doesn't wake up when I pull the phone away from my fasce 80% of the time. When I am on a call the phone randomly vibrates like I am getting a notification and when I look I have nothing. With all of this going on, making phone calls on this device is a nightmare.
Restore clean wipe did nothing.
nexus 6
The below mentioned fix is for brand new Nexus 6.
Did you try going to settings , accessibility , power button ends call, toggle that on and off.
After completing the above mentioned step. Reboot your phone and try making a call. I hope the issue get resolved.
I tried this step on an unrooted phone, which was recieved just yesterday.
I got this fix from some other thread.
aditya2529 said:
The below mentioned fix is for brand new Nexus 6.
Did you try going to settings , accessibility , power button ends call, toggle that on and off.
After completing the above mentioned step. Reboot your phone and try making a call. I hope the issue get resolved.
I tried this step on an unrooted phone, which was recieved just yesterday.
I got this fix from some other thread.
Click to expand...
Click to collapse
I'm using an app a Dev created just for this issue and it's fixed.
Nexus 6
Krunk83 said:
I'm using an app a Dev created just for this issue and it's fixed.
Nexus 6
Click to expand...
Click to collapse
What app
Orzly works fine... It doesn't cover the sensor. The Slimwrap orange vinyl (leather) face was a problem for me, had to enlarge the cutout to get suitable performance. I believe the sensor is longer than it is wide, the opposite of the factory cutout? It frames the face of the phone nicely with this screen protector on and I didn't want to take it off. The 24mm added height changes the profile of the phone alot, it no longer rests on the speaker bars/guards. This must also have effected placing the wrap on as well. The larger cutout box for the sesnor is a detractor, but the sensor works 100%. This is good , as it is my intention to run nekid with this phone but its size precludes using a case with any of the pockets I currently own.
fazbender said:
Orzly works fine... It doesn't cover the sensor. The Slimwrap orange vinyl (leather) face was a problem for me, had to enlarge the cutout to get suitable performance. I believe the sensor is longer than it is wide, the opposite of the factory cutout? It frames the face of the phone nicely with this screen protector on and I didn't want to take it off. The 24mm added height changes the profile of the phone alot, it no longer rests on the speaker bars/guards. This must also have effected placing the wrap on as well. The larger cutout box for the sesnor is a detractor, but the sensor works 100%. This is good , as it is my intention to run nekid with this phone but its size precludes using a case with any of the pockets I currently own.
Click to expand...
Click to collapse
Thanks I was just having a crazy time trying to install the front, similar case (glass protector in front) and ended up cutting a hole for the proximity sensor about 2 times the factory height, everything (seems) normal now. I used this program to help make the minimum cut, and align correctly. Did you run into any issues with the thin left & right vertical part of the front cover? Mine seems to "wrap" around the glass protector, not sure if it will stay there though