Related
My phone was stuck when install apps, so I restarted it by holding power key. Then is hard brick... I can't access bootloader and I tried http://forum.xda-developers.com/nexus-6/general/fix-fix-qhusbbulk-cm12-t3059518
After blank-flash.bat, it shows greet-device: error reading packet.
What can I do? Help, thanks:crying:
fwkimi said:
My phone was stuck when install apps, so I restarted it by holding power key. Then is hard brick... I can't access fastboot and I tried http://forum.xda-developers.com/nexus-6/general/fix-fix-qhusbbulk-cm12-t3059518
After blank-flash.bat, it shows greet-device: error reading packet.
What can I do? Help, thanks:crying:
Click to expand...
Click to collapse
I doubt that you needed to use that fix. That fix is for the downgraded bootloader brick. I suspect you were only in soft brick. Was it bootlooping?
Hold power and volume down to enter bootloader. Do or did you have TWRP installed?
More information please.
Evolution_Tech said:
I doubt that you needed to use that fix. That fix is for the downgraded bootloader brick. I suspect you were only in soft brick. Was it bootlooping?
Hold power and volume down to enter bootloader. Do or did you have TWRP installed?
More information please.
Click to expand...
Click to collapse
Dear. there is nothing after hold power and volume down, can't reboot, enter bootloader and TWRP... There is nothing on screen even charging... Only black screen. It quite strange
It show new added hardware when the phone connect with PC.
I only root and install xposed. System is 5.1.1, international version.
It showed qhsubs_bulk before I install Qualcomm Drivers. So I think maybe there are similar issue. Thanks
View attachment 3397226
View attachment 3397227
fwkimi said:
Dear. there is nothing after hold power and volume down, can't reboot, enter bootloader and TWRP... There is nothing on screen even charging... Only black screen. It quite strange
It show new added hardware when the phone connect with PC.
I only root and install xposed. System is 5.1.1, international version.
View attachment 3397226
View attachment 3397227
Click to expand...
Click to collapse
Xposed bites another one. Lol
prdog1 said:
Xposed bites another one. Lol
Click to expand...
Click to collapse
oh no:crying: I install it on Nexus4, only reboot more times...
Leave on charger for a while. If battery all way down will not show charging and will not let into bootloader or recovery.
prdog1 said:
Leave on charger for a while. If battery all way down will not show charging and will not let into bootloader or recovery.
Click to expand...
Click to collapse
Ok, have a try.
The phone and charger are not very hot as charging. Will it impact HW issue? I'm lost:crying:
fwkimi said:
Ok, have a try.
The phone and charger are not very hot as charging. Will it impact HW issue? I'm lost:crying:
Click to expand...
Click to collapse
No. But if can't boot at all will have to RMA. N9 and N6 will show nothing if battery completely down. Has to have at least 10% (guessing) before will do anything once totally depleted.
prdog1 said:
No. But if can't boot at all will have to RMA. N9 and N6 will show nothing if battery completely down. Has to have at least 10% (guessing) before will do anything once totally depleted.
Click to expand...
Click to collapse
It's hardly to RMA in China:crying: I doubt it's HW issue...
fwkimi said:
It's hardly to RMA in China:crying: I doubt it's HW issue...
Click to expand...
Click to collapse
If unlocked and can get into bootloader there is a chance. If locked and won't boot not much hope.
prdog1 said:
If unlocked and can get into bootloader there is a chance. If locked and won't boot not much hope.
Click to expand...
Click to collapse
I unlocked it, but can't access bootloader... I need amend my title.
fwkimi said:
I unlocked it, but can't access bootloader... I need amend my title.
Click to expand...
Click to collapse
Leave on charger. Sounds like only hope.
prdog1 said:
Leave on charger. Sounds like only hope.
Click to expand...
Click to collapse
:crying: It seems only I hve this problem, is there anyone else? Or it's a HW issue and just happen on that time...
fwkimi said:
My phone was stuck when install apps, so I restarted it by holding power key. Then is hard brick... I can't access bootload and I tried http://forum.xda-developers.com/nexus-6/general/fix-fix-qhusbbulk-cm12-t3059518
After blank-flash.bat, it shows greet-device: error reading packet.
What can I do? Help, thanks:crying:
Click to expand...
Click to collapse
Flash-all doesn`t on Windows, you have to flash the img`s seperately in fastboot. Just press volume up and down +power to get in fastboot mode.
gee2012 said:
Flash-all doesn`t on Windows, you have to flash the img`s seperately in fastboot. Just press volume up and down +power to get in fastboot mode.
Click to expand...
Click to collapse
FWIW: it doesn't work on Ubuntu either.
cam30era said:
FWIW: it doesn't work on Ubuntu either.
Click to expand...
Click to collapse
Oke, it works on Linux according to users
gee2012 said:
Oke, it works on Linux according to users
Click to expand...
Click to collapse
Hmm. Must be me. Thanks. Anyway, I prefer to do it manually. Just like the transmission in my car.
gee2012 said:
Flash-all doesn`t on Windows, you have to flash the img`s seperately in fastboot. Just press volume up and down +power to get in fastboot mode.
Click to expand...
Click to collapse
Sorry, I can't access bootloader. Nothing shows when power+volumn+ or power +volumn-. I think it maybe bricked
hi,
I seem to have the same problem as OP, I have no access to fastboot, either by console or button combination.
I also tried the solution provided by opssemnik but when I try to use blank-flash I get the error "sdl-transfer-image:send-image:sdl-open-multi:target error" when flashing singleimage.bin.
I have Lollipop 5.1.1. Any ideas? My phone seems a goner now...
none
DO you have SDK manager installed on your computer and your phone's manufacturer Drivers? If not install SDK Manager here.
http://developer.android.com/sdk/index.html#top Scroll down to the bottom of the page and select SDK tools only, you will see the link for windows.
After you've installed this and the drivers from the manufacturer go into SDK you just installed and install "Google USB Driver".
From there open a command prompt, plug your phone into the computer and type "adb reboot bootloader" without the quotation marks and that will get you into bootloader. you can also type "adb reboot recovery" without the quotes.
ANother way is to go to Titanium backup, hit menu, scroll down to reboot to recovery. One of those should work.
A couple days ago my Redmi Note 9 (merlin) 4/128 GB NFC automically installed the Update from V12.0.3.0.QJOEUXM to V12.0.4.0.QJOEUXM over night. I had rooted and installed a TWRP on it. As I had noticed that it was not rooted anymore I tried to reflash the TWRP over Fastboot because it was overwritten by MIUI. When I tried to boot the twrp.img the phone did so and the screen was on but black. After 4 or 5 tries it hanged up in a bootloop and I cannot access Fastboot Mode or something else anylonger.
Is there something left I can try?
Already tried power and minus option.when you connect to a desktop what does it say ?
Dokrak99 said:
Already tried power and minus option.when you connect to a desktop what does it say ?
Click to expand...
Click to collapse
It goes on and Windows makes the sound for a new device connected, and then it goes off again, and Windows makes the sound for disconnecting a device. This repeats for around 4 or 5 minutes then it goes finally off.
That's bad.
Hold the power +/- longer then 15 seconds try both.
Second
Charge for about 10 minutes and try the same again.
Last drain it when down keep pushing the power button to flat it.hook it up on desktop and install miflashtools.or try power +/- again
Dokrak99 said:
Hold the power +/- longer then 15 seconds try both.
Click to expand...
Click to collapse
Same as:
LordRedstone05 said:
It goes on and Windows makes the sound for a new device connected, and then it goes off again, and Windows makes the sound for disconnecting a device. This repeats for around 4 or 5 minutes then it goes finally off.
Click to expand...
Click to collapse
Dokrak99 said:
Charge for about 10 minutes and try the same again.
Click to expand...
Click to collapse
When I try to charge it it goes in the bootloop again until I disconnect it and the battery runs out.
Dokrak99 said:
Last drain it when down keep pushing the power button to flat it.
Click to expand...
Click to collapse
It goes on, shows this battery icon, that it's empty and goes off. This repeats until I release the button.
Dokrak99 said:
hook it up on desktop and install miflashtools.or try power +/- again
Click to expand...
Click to collapse
The miflashtool does nothing when I click on Flash with the images and scripts loaded. Power +/- does the same as before.
Sorry I thought flash tools had a option in top for selecting boot options.There is a mi tool around where can select the boot options.i need to search on my desktop what it was.we need to trigger it in fastboot/recovery mode some how.most likely it was xiaomi tools V2 but I really need to check it.tools V2 got a bricked option do.but since it restarts everytime it's pretty long shot
Dokrak99 said:
Sorry I thought flash tools had a option in top for selecting boot options.There is a mi tool around where can select the boot options.i need to search on my desktop what it was.we need to trigger it in fastboot/recovery mode some how.most likely it was xiaomi tools V2 but I really need to check it.tools V2 got a bricked option do.but since it restarts everytime it's pretty long shot
Click to expand...
Click to collapse
Thanks in advance
What should I do in this tool? The tool doesn't recognize my phone. It brings nothing since I cannot access Fastboot.
Well basically there is only one real option left . contact mi service center because mi don't support or they closed there download,edl support on there phones to prevent rom swapping .there is a edl cable with mtk support around but that's a long shot.because I never had a messed up phone like this.at least not one with mtk.without recognise you're desktop I don't see a fix in this to get in fastboot or flash it.
Download platform tools drop it on c:/ so c:/platform tools .install abd drivers package if you didn't have it.go in platform tools the top line and tick Cmd hit enter.try command : fastboot devices .try a few times if a number pops up you can try .fastboot reboot fastboot
LordRedstone05 said:
A couple days ago my Redmi Note 9 (merlin) 4/128 GB NFC automically installed the Update from V12.0.3.0.QJOEUXM to V12.0.4.0.QJOEUXM over night. I had rooted and installed a TWRP on it. As I had noticed that it was not rooted anymore I tried to reflash the TWRP over Fastboot because it was overwritten by MIUI. When I tried to boot the twrp.img the phone did so and the screen was on but black. After 4 or 5 tries it hanged up in a bootloop and I cannot access Fastboot Mode or something else anylonger.
Is there something left I can try?
Click to expand...
Click to collapse
TWRP bricked my redmi Note 9 too, but i had ADB Connection in the black Screen so i rebooted to Fastboot over ADB and reflashed the Stock rom
LordRedstone05 said:
A couple days ago my Redmi Note 9 (merlin) 4/128 GB NFC automically installed the Update from V12.0.3.0.QJOEUXM to V12.0.4.0.QJOEUXM over night. I had rooted and installed a TWRP on it. As I had noticed that it was not rooted anymore I tried to reflash the TWRP over Fastboot because it was overwritten by MIUI. When I tried to boot the twrp.img the phone did so and the screen was on but black. After 4 or 5 tries it hanged up in a bootloop and I cannot access Fastboot Mode or something else anylonger.
Is there something left I can try?
Click to expand...
Click to collapse
Did you find solution on this? Please answer bro i need your help
Jayson Galang said:
Did you find solution on this? Please answer bro i need your help
Click to expand...
Click to collapse
Unfortunately i haven't found a solution. I had to send it to a service center 2 Days ago. Sorry, that i couldn't help.
the right driver is mtk this is not adb nothing happens the this you could fixs is
go to the nearest techniciann beacause they need special tools to fix properly
Is your phone still bricked, If yes, I can provide link for the factory firmware recently released for Merlin, You could give flashing that in SP Flash a try, does not need auth account.
If your device keep booting in recovery (or blackscreen), you need to erase misc partition.
Here, is the guide for erasing MISC partition: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4209299/
Good luck
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/
Communos said:
Is your phone still bricked, If yes, I can provide link for the factory firmware recently leaked for Merlin, You could give flashing that in SP Flash a try, does not need auth account.
Click to expand...
Click to collapse
yow is that legit? Had my redmi note 9 bricked for a week now.
CruisaderX said:
yow is that legit? Had my redmi note 9 bricked for a week now.
Click to expand...
Click to collapse
If you got bootloop after flashed magisk, you need to flash stock rom boot.img.
If you got bootloop after flashed TWRP, you need to flash stock rom recovery.img.
If you got bootloop (or black screen) after flashed misc partition, you need to erase misc partition.
If it keeps restarting, you've made any wrong modification. You need to follow your steps back and try to unmake your modification.
If you can't enter in fastboot mode or recovery mode, you need to flash stock rom using sp flash tool.
If you are using V12.0.4.0 or lower, you can flash without EDL and authentication.
If you are using V12.0.5.0 or higher, you need EDL and authentication for flashing.
If you are using V12.0.5.0 or higher, TWRP will not work.
If you want to use sp flash tool, you need to flash the stock rom preloader using V12.0.4.0 (or lower). (It will works perfectly with lower preloader binary version).
With an older preloader version, your phone will can receive DA files and accept flashing with NO auth.
Everything you need to do is plug your phone in usb (without press any key, if you press any key it will enter in EDL mode and requests authenticaion).
Here, are PRELOADER binaries for flashing: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4221081/
Here, are DA files for flashing using flash tool: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4209767/
Here, you can find boot images for original stock and magisk patched: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4204671/
If you want to keep TWRP working on V12.0.5.0 or higher, you need to flash the stock rom lk partition using V12.0.4.0 (or lower). (It will works perfectly with lower lk partition version).
Here, are LK images for flashing: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4218925/
If you want to disable TWRP, you need to flash stock rom recovery partition.
Here, are RECOVERY images for flashing: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4204671/
If your device keep booting in recovery (or blackscreen), you need to erase misc partition.
Here, is the guide for erasing MISC partition: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4209299/
If you want to know what is working for MERLIN, take a look: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4204873/
Good luck
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/
VD171 said:
If you got bootloop after flashed magisk, you need to flash stock rom boot.img.
If you got bootloop after flashed TWRP, you need to flash stock rom recovery.img.
If you got bootloop (or black screen) after flashed misc partition, you need to erase misc partition.
If you are using V12.0.5.0 or higher, TWRP will not work.
Here, you can find boot images for original stock and magisk patched: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4204671/
If you want to keep TWRP working on V12.0.5.0 or higher, you need to flash the stock rom lk partition using V12.0.4.0 (or lower). (It will works perfectly with lower lk partition version).
Here, are LK images for flashing: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4218925/
If you want to disable TWRP, you need to flash stock rom recovery partition.
Here, are RECOVERY images for flashing: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4204671/
If your device keep booting in recovery (or blackscreen), you need to erase misc partition.
Here, is the guide for erasing MISC partition: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4209299/
If you want to know what is working for MERLIN, take a look: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4204873/
Good luck
[/QUOTE
Click to expand...
Click to collapse
I tried actually before after failed attempt of flashing twrp. First, I got my redmi note 9 bricked after following one of the guides posted here (rooting), I will call this state 1 brick. In state 1 brick you can still access fastboot mode normally. Then i tried to flash twrp hoping to just flash a rom to fix it leading to state 2 brick. In state 2 brick, it seems like it is stucked on recovery (btw the recovery is only displaying black screen) and is classifying fastboot as the bootloader, meaning you can boot into fastboot using adb command reboot bootloader. Then I followed one of the guides here again and then it managed to lead my device to state 3 brick. In state 3 brick it continuously boot looping only displaying the boot image for a second then repeat. Normally it can be fixed by flashing a stock rom using sp flash tool but not with xiaomi devices. Now I am stucked with a hard bricked note 9 with no way of fixing.
CruisaderX said:
i tried before actually after failed attempt of flashing twrp. First, I got my redmi note 9 bricked after following one of the guides posted here (rooting, I will call this state 1 brick. In state 1 brick you can still access fastboot mode. Then i tried to flash twrp hoping to just flash a rom leading to state 2 brick. In state 2 brick, it seems like it is stucked on recovery (btw the recovery is only displaying black screen) and is classifying fastboot as the bootloader, meaning you can boot into fastboot using adb command reboot boot loader. Then I followed one of the guides here again and then it managed to lead my device to state 3 brick. In state 3 brick it continuously boot looping only displaying the boot image for a second then repeat. Normally it can be fixed by flashing a stock rom using sp flash tool but not with xiaomi device. Now I am stucked with a hard bricked note 9 with no way of fixing.
Click to expand...
Click to collapse
You need to read every line and every word careful and follow only specific guide for your specific problem.
If you try to do anything you see, obviously you will cause more damages to your device.
Please, read my post again: https://forum.xda-developers.com/t/redmi-note-9-merlin-4-128-nfc-hard-brick.4201717/post-84379823
If you can't enter in fastboot mode or recovery mode, you need to flash stock rom using sp flash tool.
If you are using V12.0.4.0 or lower, you can flash without EDL and authentication.
If you are using V12.0.5.0 or higher, you need EDL and authentication for flashing.
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/
I flashed a twrp recovery in my poco m4 pro then using fastboot mode but i can't seem to flash it through "fastboot flash recovery", then i tried "fastboot flash boot" then it flashed the twrp. The problem is i went to reboot and clicked slot b then i rebooted my phone and it starts to bootloop and i can't enter the recovery and fastboot now. Please help me i can't even do anything to my phone now
earljames27 said:
I flashed a twrp recovery in my poco m4 pro then using fastboot mode but i can't seem to flash it through "fastboot flash recovery", then i tried "fastboot flash boot" then it flashed the twrp. The problem is i went to reboot and clicked slot b then i rebooted my phone and it starts to bootloop and i can't enter the recovery and fastboot now. Please help me i can't even do anything to my phone now
Click to expand...
Click to collapse
After draining the battery and trying the fastboot or recovery configurations as soon as you plugged into wall charger, still does not work?
LR7875 said:
After draining the battery and trying the fastboot or recovery configurations as soon as you plugged into wall charger, still does not work?
Click to expand...
Click to collapse
still bootlooping now, it has a charge left. Will it go to fastboot after draining the battery? i can't do anything now but to wait
earljames27 said:
still bootlooping now, it has a charge left. Will it go to fastboot after draining the battery? i can't do anything now but to wait
Click to expand...
Click to collapse
Maybe, idk, just let bootloop until it turns off, leave it for 1 day more, then try fastboot
LR7875 said:
Maybe, idk, just let bootloop until it turns off, leave it for 1 day more, then try fastboot
Click to expand...
Click to collapse
ok mate i'll let you know if it works.
LR7875 said:
Maybe, idk, just let bootloop until it turns off, leave it for 1 day more, then try fastboot
Click to expand...
Click to collapse
still not booting in fastboot mode or recovery mode after draining the battery, is there any way how to solve this?
No warranty by any chance? Then you might need choose between to pay a hundred bucks for an authorized account for EDL flashing, or to sold it as is for parts.
LR7875 said:
No warranty by any chance? Then you might need choose between to pay a hundred bucks for an authorized account for EDL flashing, or to sold it as is for parts.
Click to expand...
Click to collapse
finally fixed it with the help of an indian video lol indian saves the day, but anyways thanks for the advice mate
earljames27 said:
finally fixed it with the help of an indian video lol indian saves the day, but anyways thanks for the advice mate
Click to expand...
Click to collapse
Video link would be cool for other users then.
I also got the issue and managed to fix it with an exploit for Mediatek chips.
For others: feel free to DM if you have this issue (until someone post a good and understandable tutorial).
Eidenz said:
Video link would be cool for other users then.
I also got the issue and managed to fix it with an exploit for Mediatek chips.
For others: feel free to DM if you have this issue (until someone post a good and understandable tutorial).
Click to expand...
Click to collapse
This is the link for the giga chad indian tutorial lol
earljames27 said:
This is the link for the giga chad indian tutorial lol
Click to expand...
Click to collapse
Not work, Bootloop on Poco M4 Pro 5G. All drivers required are installed on pc and i connect the phone but the mtkclient not recognize him (holding vol down it recognize on brom mode, but i cannot do anything useful in this mode). Also don't changed a thing after write boot.img using brom mode.
Before i flashed an gsi rom (pixel experience plus 12.1(ponces)) with fastbootd after unlocking bootloader, doing everything right (the stock rom is very buggy).
And it started the bootloop.
I'm waiting the phone drains the battery to try to go to fastboot mode.
Update: I fixed it.
nice
Maroedes said:
Not work, Bootloop on Poco M4 Pro 5G. All drivers required are installed on pc and i connect the phone but the mtkclient not recognize him (holding vol down it recognize on brom mode, but i cannot do anything useful in this mode). Also don't changed a thing after write boot.img using brom mode.
Before i flashed an gsi rom (pixel experience plus 12.1(ponces)) with fastbootd after unlocking bootloader, doing everything right (the stock rom is very buggy).
And it started the bootloop.
I'm waiting the phone drains the battery to try to go to fastboot mode.
Update: I fixed it.
Click to expand...
Click to collapse
how did you fix it?
ps: i literally have the same situation of pixel experiance gsi and bootloop.
Hello everyone!
I hope this is seen, because I need your help, well, days ago I wanted to install the pixel experience rom, everything was going well, but when it was installed, I had problems with wifi, and only worked with mobile data (it should be noted that it was Android 13 and my version is merlin). Well, then I decided to change it and return it to stock rom but it has been a tragedy since then. First, I think that being mediatek, the device does not allow to be flashed with mitool, I've tried everything, install twrp but did not serve and now does not let me enter fastboot, what do you recommend? It could be solved (by myself or a technician), or better I give it as dead? I hope your prompt response
estebg_1300 said:
Hello everyone!
I hope this is seen, because I need your help, well, days ago I wanted to install the pixel experience rom, everything was going well, but when it was installed, I had problems with wifi, and only worked with mobile data (it should be noted that it was Android 13 and my version is merlin). Well, then I decided to change it and return it to stock rom but it has been a tragedy since then. First, I think that being mediatek, the device does not allow to be flashed with mitool, I've tried everything, install twrp but did not serve and now does not let me enter fastboot, what do you recommend? It could be solved (by myself or a technician), or better I give it as dead? I hope your prompt response
Click to expand...
Click to collapse
Miflash works with Qualcomm and Media Tek but for the latter it is better to use
https://xiaomitools.com/sp-flash-tool-en/
The problem is that the phone must be in Fastboot mode.
https://sourceforge.net/projects/recovery-for-xiaomi-devices/files/merlin/
TWRP/O.F A11 et A12
Have you tried with the TWRP of:
Wipe/format data type yes
reboot TWRP
flash a recovery rom
bro, try this one, though it was for redmi 6A.
I think the method there could be tried on other xiaomi phones.
goodluck!
Fix HardBrick Redmi 6A (no recovery and no fastboot, only black screen)Fix without need Authotization stuff
----------------------------------------------------------------------- Finally I could fix my redmi 6A after suffering hardbrick. I couldnot enter to recovery neither to fastboot mode. My redmi 6A just give me a black screen with vibration on...
forum.xda-developers.com
Tajil said:
bro, try this one, though it was for redmi 6A.
I think the method there could be tried on other xiaomi phones.
goodluck!
Fix HardBrick Redmi 6A (no recovery and no fastboot, only black screen)Fix without need Authotization stuff
----------------------------------------------------------------------- Finally I could fix my redmi 6A after suffering hardbrick. I couldnot enter to recovery neither to fastboot mode. My redmi 6A just give me a black screen with vibration on...
forum.xda-developers.com
Click to expand...
Click to collapse
Bro, do you know what to put in download agent, scatter loading file and authenticator file?, it gives me an error
NOSS8 said:
Miflash works with Qualcomm and Media Tek but for the latter it is better to use
https://xiaomitools.com/sp-flash-tool-en/
The problem is that the phone must be in Fastboot mode.
https://sourceforge.net/projects/recovery-for-xiaomi-devices/files/merlin/
TWRP/O.F A11 et A12
Have you tried with the TWRP of:
Wipe/format data type yes
reboot TWRP
flash a recovery rom
Click to expand...
Click to collapse
And how I can flash the recovery rom if my phone doesnt power on, and xiaomi mi tool doesnt recognize too my phone? I cant enter in fastboot and recovery mode, help me please
estebg_1300 said:
And how I can flash the recovery rom if my phone doesnt power on, and xiaomi mi tool doesnt recognize too my phone? I cant enter in fastboot and recovery mode, help me please
Click to expand...
Click to collapse
In the 1st post you say you have installed the TWRP.
See here
https://forum.xda-developers.com/t/recover-from-hard-brick-no-fastboot-or-recovery.4469431/
https://forum.xda-developers.com/t/...otloop-hard-brick-softbrick-solution.4460191/
https://forum.xda-developers.com/t/tool-rom2box-all-in-one-frp-flashing-unlocking-tool.4477349/
NOSS8 said:
En la primera publicación dices que tienes instalado el TWRP.
Mira aquí
https://forum.xda-developers.com/t/recover-from-hard-brick-no-fastboot-or-recovery.4469431/
https://forum.xda-developers.com/t/closed-evergo-100-working-poco-m4-pro-5g-redmi-note-11t-india-miui-all-mediatek-devices-bootloop-hard- ladrillo-softbrick-solution.4460191/
https://forum.xda-developers.com/t/tool-rom2box-all-in-one-frp-flashing-unlocking-tool.4477349/
Click to expand...
Click to collapse
Is there a way that we can talk privately and I can explain better and you can guide me to do the procedure?
estebg_1300 said:
Is there a way that we can talk privately and I can explain better and you can guide me to do the procedure?
Click to expand...
Click to collapse
Sorry but I only have Qualcomm devices.
See with the links above or do some research.
EDIT:
You must install specific drivers to see the phone on the pc.
NOSS8 said:
Sorry but I only have Qualcomm devices.
See with the links above or do some research.
EDIT:
You must install specific drivers to see the phone on the pc.
Click to expand...
Click to collapse
how I do the last that you say?
estebg_1300 said:
how I do the last that you say?
Click to expand...
Click to collapse
I posted some links that might be useful, that's all.
I searched with:
Xiaomi mediatek hard bricked, no fastboot
For example:
https://phonesinnigeria.com/unbrick-hard-bricked-dead-mtk-android-device/
"First connect your phone to your pc, if your pc does not make the sound of usb connection, press the volume key (up or down) on your device till you hear sound on your pc, and also your phone will start vibrating but if it does not vibrate keep on pressing the volume key (up or down) as many times as possible till your phone start vibrating. Then it starts connecting and disconnecting in your pc."
NOSS8 said:
I posted some links that might be useful, that's all.
I searched with:
Xiaomi mediatek hard bricked, no fastboot
For example:
https://phonesinnigeria.com/unbrick-hard-bricked-dead-mtk-android-device/
"First connect your phone to your pc, if your pc does not make the sound of usb connection, press the volume key (up or down) on your device till you hear sound on your pc, and also your phone will start vibrating but if it does not vibrate keep on pressing the volume key (up or down) as many times as possible till your phone start vibrating. Then it starts connecting and disconnecting in your pc."
Click to expand...
Click to collapse
now I get 'the last usb device you connected did not work properly and Windows does not recognize it'.
What should I do now?
estebg_1300 said:
now I get 'the last usb device you connected did not work properly and Windows does not recognize it'.
What should I do now?
Click to expand...
Click to collapse
Maybe change the usb port or install other drivers, but as I told you above, I don't know the tools for MediaTek but it's much easier to restore them for free than the Qualcomm ones.
Do some research on the internet and take the time to fully understand.
NOSS8 said:
Maybe change the usb port or install other drivers, but as I told you above, I don't know the tools for MediaTek but it's much easier to restore them for free than the Qualcomm ones.
Do some research on the internet and take the time to fully understand.
Click to expand...
Click to collapse
and you know anyone that know about mtk and can help me? Thanks btw
estebg_1300 said:
and you know anyone that know about mtk and can help me? Thanks btw
Click to expand...
Click to collapse
See here
https://forum.xda-developers.com/f/redmi-note-9-guides-news-discussion.10961/
Maybe him
VD171
forum.xda-developers.com
download agent (DA), already filled if we use spflash. if not just browse and search inside spflash folder (there 3 to 4 DA file there).
scatter file, you get it from the stock firmware, extract the firmware, check inside the folder. you could directly browser from scatter input to the firmware folder.
auth file, just donload it from the link, extract it and in spflash-- auth file input just browse the file
exactly what I did here, u could do it bro:
Tajil said:
bro, try this one, though it was for redmi 6A.
I think the method there could be tried on other xiaomi phones.
goodluck!
Fix HardBrick Redmi 6A (no recovery and no fastboot, only black screen)Fix without need Authotization stuff
----------------------------------------------------------------------- Finally I could fix my redmi 6A after suffering hardbrick. I couldnot enter to recovery neither to fastboot mode. My redmi 6A just give me a black screen with vibration on...
forum.xda-developers.com
Click to expand...
Click to collapse
Tajil said:
download agent (DA), already filled if we use spflash. if not just browse and search inside spflash folder (there 3 to 4 DA file there).
scatter file, you get it from the stock firmware, extract the firmware, check inside the folder. you could directly browser from scatter input to the firmware folder.
auth file, just donload it from the link, extract it and in spflash-- auth file input just browse the file
Click to expand...
Click to collapse
Thanks, but read and trying translate to spanish for english, this error appears in every time that i try to put the phone in my pc
Tajil said:
exactly what I did here, u could do it bro:
Click to expand...
Click to collapse
usb device is not recognized
the last device you connected to this computer did not work and Windows does not recognize it.' is what appears in the image I sent you
estebg_1300 said:
usb device is not recognized
the last device you connected to this computer did not work and Windows does not recognize it.' is what appears in the image I sent you
Click to expand...
Click to collapse
it maybe driver issues
try installing some driver needed:
-mtk driver
-libusb-win
-xiaomi usb driver
-vcom driver
-etc ...
Tajil said:
it maybe driver issues
try installing some driver needed:
-mtk driver
-libusb-win
-xiaomi usb driver
-vcom driver
-etc ...
Click to expand...
Click to collapse
now I have this problem...
Hi everyone, days ago I posted on the forum that I had a bootloop, I could not enter fastboot or recovery, well, I managed to install the rom by sp flash tool without errors, but now I get the error "nv data is corrupted" as seen in the video that I attach, anyone know of a viable solution? What is free and do not have any other problem and my phone back to normal? Because I can enter fastboot and maybe download or twrp or download pixel experience or a rom, What do you recommend?
Hi there.
I wanted to root a Redmi 10S device. Bootloader was also opened. The flash went during fastboot mode, then after the fastboot reboot command, the device restarted, but it only shows "Redmi" and the word android at the bottom. I tried to access recovery and fastboot mode, but powr+volD only restarts the device and only the Redmi inscription is visible.
I don't know what they call this state in which the device is.
If there is a suitable link on the forum, I would appreciate it.
Hi there!
What did you flash excatly?
I mean, did you flash the whole phone, or just a patched boot image?
Andris85 said:
Hi there.
I wanted to root a Redmi 10S device. Bootloader was also opened. The flash went during fastboot mode, then after the fastboot reboot command, the device restarted, but it only shows "Redmi" and the word android at the bottom. I tried to access recovery and fastboot mode, but powr+volD only restarts the device and only the Redmi inscription is visible.
I don't know what they call this state in which the device is.
If there is a suitable link on the forum, I would appreciate it.
Click to expand...
Click to collapse
reflash stock and done to enter in fastboot mode press power and volD keep presing volD until the phone start in fastboot mode and flash it
gurtnyi said:
Hi there!
What did you flash excatly?
I mean, did you flash the whole phone, or just a patched boot image?
Click to expand...
Click to collapse
Just the boot.ini. but I think this would make fastboot mode work. But it's not working
tutibreaker said:
reflash stock and done to enter in fastboot mode press power and volD keep presing volD until the phone start in fastboot mode and flash it
Click to expand...
Click to collapse
What should I use to reflash? Mi flash? This is the NS
Yes... I probably mixed up the boot file in the downloads folder and not the correct received flash
Click to expand...
Click to collapse
Then, you don't have to flash the whole phone again, just flash back the original image, and try rooting with twrp and magisk zip file (rename the apk file from magisk.apk to magisk.zip, and then flash it in twrp)
If you can't install twrp, or something went wrong, take a full backup from your phone (like using google's backup service, and Miui backup--> it 'll save the backup to internal storage/miui/backup/AllBackup) and then ypu can reflash the phone with mi flash tool, but don't lock the bootloader back, and after flash, you shuold enable oem unlock in developer settings.
One quick question:
Did you enable oem unlocking in developer settings, before trying to flash the modified image?
gurtnyi said:
Then, you don't have to flash the whole phone again, just flash back the original image, and try rooting with twrp and magisk zip file (rename the apk file from magisk.apk to magisk.zip, and then flash it in twrp)
If you can't install twrp, or something went wrong, take a full backup from your phone (like using google's backup service, and Miui backup--> it 'll save the backup to internal storage/miui/backup/AllBackup) and then ypu can reflash the phone with mi flash tool, but don't lock the bootloader back, and after flash, you shuold enable oem unlock in developer settings.
One quick question:
Did you enable oem unlocking in developer settings, before trying to flash the modified image?
Click to expand...
Click to collapse
yepp, enable oem unlock. But fastbootmode is required for all operations. But fastboot mode doesn't work.
What do you mean it doesn't work?
Can't enter into fastboot mode?
gurtnyi said:
What do you mean it doesn't work?
Can't enter into fastboot mode?
Click to expand...
Click to collapse
Can't enter fastboot mode. The device only shows "Redmi" lettering. If fatboot worked, I could have done it already. power+volume down, the device just restarts and shows "redmi".
Hmm..
And if you holding the volD and power buttons together for a longer time?
Like a min, or sth
I had a similar situation, but after a few tries it went into fastboot mode
gurtnyi said:
Hmm..
And if you holding the volD and power buttons together for a longer time?
Like a min, or sth
I had a similar situation, but after a few tries it went into fastboot mode
Click to expand...
Click to collapse
it just restarts, as long as I press and hold volume down+power, if I don't press it, it just shows the redmi text
I apologise, but I 've currently ran out of ideas. If I can find any solution, I 'll post an answer about it.
gurtnyi said:
I apologise, but I 've currently ran out of ideas. If I can find any solution, I 'll post an answer about it.
Click to expand...
Click to collapse
TXH
Hi there the forgive my on my bad english and text.
The Only thing u can do is restoring the firmware by using brom mode, Look it up or follow the steps i'll give u....
First keep in mind brom works best Without the batary conected . So remove the thin cover plate at the back u can loosen it with heat , after removing the cover move all screws and remove the housing so u can disconect the batary at the mainboard .
Next u will have to install the Vcom drivers according your chipset mediatek etc.
For the Vcom drivers and install of it u can follow https://www.hovatek.com/forum/thread-16640.html
U must download or allready have a firmware file in fastboot format , Open up SP Flash tool and go to optionsd and select connection, click the w/o battery option and close it. Open your scatter file and than click on download . Insert your phone wile holding your volume down or up , with my device a redmi note 10s it was the up and down to getter for it was flashing the rom. this should flash your device back with a working fastboot and working rom.
Hope u will succeed...
Greetsss
Pegelaar_NL said:
Hi there the forgive my on my bad english and text.
The Only thing u can do is restoring the firmware by using brom mode, Look it up or follow the steps i'll give u....
First keep in mind brom works best Without the batary conected . So remove the thin cover plate at the back u can loosen it with heat , after removing the cover move all screws and remove the housing so u can disconect the batary at the mainboard .
Next u will have to install the Vcom drivers according your chipset mediatek etc.
For the Vcom drivers and install of it u can follow https://www.hovatek.com/forum/thread-16640.html
U must download or allready have a firmware file in fastboot format , Open up SP Flash tool and go to optionsd and select connection, click the w/o battery option and close it. Open your scatter file and than click on download . Insert your phone wile holding your volume down or up , with my device a redmi note 10s it was the up and down to getter for it was flashing the rom. this should flash your device back with a working fastboot and working rom.
Hope u will succeed...
Greetsss
Click to expand...
Click to collapse
Yep, this guy here 's got the point. If you can't flash with sp flash tool because auth fail, there's a method to bypass it.
You can find the tutorial here: https://www.getdroidtips.com/bypass-mediateks-sp-flash-tool-authentication-protection/
I also got some help from this guy's post, many thanks to him too.
https://forum.xda-developers.com/t/...ad_da_fail-0x7d4-2004-for-mtk-phones.3692259/
Let us know how it's going with it! ;D
I can unbrick the device at any time. There is another problem. An incorrect boot file is probably being copied. After TWRP you will never enter android again. But TWRP also only loads up to the subtitle. I tried a lot of methods. Now I will try google p ex. android and make it root.
But, if someone can recommend a device intended for gaming, but easy to root, then I will buy one
Andris85 said:
I can unbrick the device at any time. There is another problem. An incorrect boot file is probably being copied. After TWRP you will never enter android again. But TWRP also only loads up to the subtitle. I tried a lot of methods. Now I will try google p ex. android and make it root.
But, if someone can recommend a device intended for gaming, but easy to root, then I will buytoday there is a lot of devices for gaming like rog phone and red magic
Click to expand...
Click to collapse
today there is a lot of devices for gaming like rog phone and red magic, but is you are looking for a "gaming phone" in low or mid-range you are just wasting your money
Andris85 said:
I can unbrick the device at any time. There is another problem. An incorrect boot file is probably being copied. After TWRP you will never enter android again. But TWRP also only loads up to the subtitle. I tried a lot of methods. Now I will try google p ex. android and make it root.
But, if someone can recommend a device intended for gaming, but easy to root, then I will buy one
Click to expand...
Click to collapse
There's a tutorial, that helped me installing twrp correctly to this phone, I'll link my post about this.
https://forum.xda-developers.com/t/twrp-on-android-12.4522273/
tutibreaker said:
today there is a lot of devices for gaming like rog phone and red magic, but is you are looking for a "gaming phone" in low or mid-range you are just wasting your money
Click to expand...
Click to collapse
If you can root it easily, then the expensive one is good for me! Normal root was not available for typical gamer phones for years. If I buy something for which root may not be available, then I'm wasting my money...
gurtnyi said:
There's a tutorial, that helped me installing twrp correctly to this phone, I'll link my post about this.
https://forum.xda-developers.com/t/twrp-on-android-12.4522273/
Click to expand...
Click to collapse
I will look today