Related
http://bbs.lenovomobile.cn/z2pro/t831704/
https://mega.nz/#!Z25QRJ5J!-vIbNagowU2-XNF4o1Y4YKeAMXvrw7PZ9cFVww7UcH4
Hi there.
I just install this ROM on my phone.
Now I'm trying to install Google Play on it.
Here is a optional link to download the ROM:
https://mega.nz/#!BANhTIZZ!OH8QT5WOvZ8bCFjrn-vfl4jQvbXGD3w1PlExDfSTzNM
Edit: Google play with open gapps pico
Root:
https://mega.nz/#!xN8kQIjB!PPaZGri4pqLIZvQsnhrUitjXUEct8fetyMeo5C1Athg
Peace
I am currently on AICP so how can I install this rom?
alien_jiggy said:
I am currently on AICP so how can I install this rom?
Click to expand...
Click to collapse
Firts you have to install via QFIL Zui（2.3.044）
Unlock boatloader
Install Recovery 3.1（chinese one）
Wipe Dalvik, Cache and Data via recovery
Install Flyme and boot system （firts boot take some time, be patiente）
Install opengapps arm64 6.0 pico
Enjoy
Zenuno said:
Firts you have to install via QFIL Zui（2.3.044）
Unlock boatloader
Install Recovery 3.1（chinese one）
Wipe Dalvik, Cache and Data via recovery
Install Flyme and boot system （firts boot take some time, be patiente）
Install opengapps arm64 6.0 pico
Enjoy
Click to expand...
Click to collapse
i used TWRP 3.02 and didnt install stock rom via QFIL Zui.
i i just wiped cache/data/dalvik/system ten flash with Flymeos Rom.everything seems good.but still testing
Zenuno said:
Firts you have to install via QFIL Zui（2.3.044）
Unlock boatloader
Install Recovery 3.1（chinese one）
Wipe Dalvik, Cache and Data via recovery
Install Flyme and boot system （firts boot take some time, be patiente）
Install opengapps arm64 6.0 pico
Enjoy
Click to expand...
Click to collapse
Unlocked bootloader
Flashed TWRP 3.1 Official
Wiped Dalvik, Cache and Data
Installed ROM
ROM on bootloop... Waited for over 10 min
Previously, had ZUI 2.3 Marshmallow... Please help...
G7495x said:
Unlocked bootloader
Flashed TWRP 3.1 Official
Wiped Dalvik, Cache and Data
Installed ROM
ROM on bootloop... Waited for over 10 min
Previously, had ZUI 2.3 Marshmallow... Please help...
Click to expand...
Click to collapse
Hi there.
Try to reboot to recovery again and wipe dalvik, cache, data and system and install rom again...
Zenuno said:
Hi there.
Try to reboot to recovery again and wipe dalvik, cache, data and system and install rom again...
Click to expand...
Click to collapse
Yep... Did that... Obviously...
Currently, switched to lineage nougat
new version look up
new version on the main page
iliakele said:
new version on the main page
Click to expand...
Click to collapse
if there is a new version then change thread title too .... still writing there old version name ...
KaptanHarlock said:
if there is a new version then change thread title too .... still writing there old version name ...
Click to expand...
Click to collapse
i cant change it
oops, any step by step guide, from unlock bootloader? thx.
OTG Support in Flyme
Don´t work OTG in Flyme 6.7.11.17R ??
meizu released android 7 based flyme 6 rom for their phones . i hope some one can port to our zuk phones ...
https://reameizu.com/flyme-update-6-7-12-12-beta/
I was wondering why with k20 pro you dont wipe system? In all the thread i see flashing procedure, after first flashing miui CN, format data(if encrypted) wipe cache, delvik and data but not system? In Poco we wipe system even for a dirty clash (delvik cache, system then flash rom and gapps and alls good).
Anyone else from poco here with tips about differences in flashing procedure?
Mooatreides said:
I was wondering why with k20 pro you dont wipe system? In all the thread i see flashing procedure, after first flashing miui CN, format data(if encrypted) wipe cache, delvik and data but not system? In Poco we wipe system even for a dirty clash (delvik cache, system then flash rom and gapps and alls good).
Anyone else from poco here with tips about differences in flashing procedure?
Click to expand...
Click to collapse
It's normal for most ROMs to wipe system as part of their install script. So normally there is no need to wipe system manually before. You will only need to wipe system if a ROM developer/maintainer tells you to in their flashing instructions.
See this page from the official TWRP FAQs https://twrp.me/faq/whattowipe.html
Robbo.5000 said:
It's normal for most ROMs to wipe system as part of their install script. So normally there is no need to wipe system manually before. You will only need to wipe system if a ROM developer/maintainer tells you to in their flashing instructions.
See this page from the official TWRP FAQs https://twrp.me/faq/whattowipe.html
Click to expand...
Click to collapse
Cool thanks alot man that makes sence actually.
Hi. I have a chinese K20 Pro and was using the wzsx150 TWRP version and shifted to mauronofrio for the Android Q decryption support but now I am stuck being able to boot only to recovery.
I cannot get my phone to boot system. Tried flashing my current xiaomi.eu 9.8.1 twice to now avail. All files are accessible but for whatever reason, when I try to boot system, I see the redmi icon, goes black for a sec, then the redmi icon again and then recovery
The phone came with fake global rom, unlocked. Flashed xiaomi.eu with bootloader still unlocked. TWRP 3.3.1-2 raphael by mauronofrio
zzbsi said:
Hi. I have a chinese K20 Pro and was using the wzsx150 TWRP version and shifted to mauronofrio for the Android Q decryption support but now I am stuck being able to boot only to recovery.
I cannot get my phone to boot system. Tried flashing my current xiaomi.eu 9.8.1 twice to now avail. All files are accessible but for whatever reason, when I try to boot system, I see the redmi icon, goes black for a sec, then the redmi icon again and then recovery
The phone came with fake global rom, unlocked. Flashed xiaomi.eu with bootloader still unlocked. TWRP 3.3.1-2 raphael by mauronofrio
Click to expand...
Click to collapse
Go to wipe, advance wipe then select cache dalvik system & wipe it. Don't wipe internal storage. Then flash the ROM again. Then again go to wipe and format data. (Will delete all your files) now reboot to system
safinahmed said:
Go to wipe, advance wipe then select cache dalvik system & wipe it. Don't wipe internal storage. Then flash the ROM again. Then again go to wipe and format data. (Will delete all your files) now reboot to system
Click to expand...
Click to collapse
That is what i ended up doing. Wasn't planning on losing my data for upgrading twrp, but hey that's how it goes.
zzbsi said:
That is what i ended up doing. Wasn't planning on losing my data for upgrading twrp, but hey that's how it goes.
Click to expand...
Click to collapse
Always take data backup before playing with these stuff
Hello,
I have an Indian K20 pro (Raphaelin), my bootloader has been unlocked. I flashed Indian (10.3.8.0, Android Q) through Abhishek's TWRP. I wanted to check out Miui Mix, so I did the usual, booted in to Recovery (TWRP) then clicked on Format Data, then proceeded to wipe other dalvik, cache, system, internal storage, I then tried to boot in to recovery again so that I could flash the Rom. I was stuck in fastboot, so couldn't proceed further with anything but the Fastboot logo. I then flashed Fastboot Rom (10.3.3.0) through the MiFlash tool. Booted in to the ROM, then flashed Mauronofrio's TWRP, then I repeated the same process Format Data, then, wipe other dalvik, cache, system, internal storage. Now I am back to square stuck with the Fastboot mode which doesn't seem to be losing my sight. While I did flash the fastboot rom again, I'm just hesitant to proceed further without people with experience.
Can someone please help me install Miui Mix? Thank you.
Format data type yes / wipe dalvik , cashe maybe internal but not system.
I hope this will work
Platinum_Pyth0n said:
Hello,
I have an Indian K20 pro (Raphaelin), my bootloader has been unlocked. I flashed Indian (10.3.8.0, Android Q) through Abhishek's TWRP. I wanted to check out Miui Mix, so I did the usual, booted in to Recovery (TWRP) then clicked on Format Data, then proceeded to wipe other dalvik, cache, system, internal storage, I then tried to boot in to recovery again so that I could flash the Rom. I was stuck in fastboot, so couldn't proceed further with anything but the Fastboot logo. I then flashed Fastboot Rom (10.3.3.0) through the MiFlash tool. Booted in to the ROM, then flashed Mauronofrio's TWRP, then I repeated the same process Format Data, then, wipe other dalvik, cache, system, internal storage. Now I am back to square stuck with the Fastboot mode which doesn't seem to be losing my sight. While I did flash the fastboot rom again, I'm just hesitant to proceed further without people with experience.
Can someone please help me install Miui Mix? Thank you.
Click to expand...
Click to collapse
No need to wipe internal storage, it gets wiped when you format data. Don't wipe system.
After formatting data go to the mount menu and unmount data, then mount it again. You should then be able to access the data partition OK, without needing to reboot into TWRP. From here you can move the ROM your want to install onto the phone and then flash it.
Also, after reinstalling the fastboot ROM, make sure you've booted into MIUI at least once before installing TWRP.
ergysramaj said:
Format data type yes / wipe dalvik , cashe maybe internal but not system.
I hope this will work
Click to expand...
Click to collapse
Yup, didn't work. Thank you for helping though.
Now that you have a clean stock fastboot rom flashed, flash twrp, wipe data(use that where you have to type YES), then flash your mix ROM. Don't wile system lol
Sent from my Redmi K20 Pro using Tapatalk
Robbo.5000 said:
No need to wipe internal storage, it gets wiped when you format data. Don't wipe system.
After formatting data go to the mount menu and unmount data, then mount it again. You should then be able to access the data partition OK, without needing to reboot into TWRP. From here you can move the ROM your want to install onto the phone and then flash it.
Also, after reinstalling the fastboot ROM, make sure you've booted into MIUI at least once before installing TWRP.
Click to expand...
Click to collapse
Hey Robo.5000, we meet again.
A summary of what I have done so far: Installed Fastboot 10.3.3.0, booted into the ROM, then finished setting up the account. Tried to Flash TWRP (Mauro's & Abhishek's) builds, then a Mod on the Telegram group of Miui Mix suggested me to: Format Data, then do the Dalvik Cache, System, Cache, etc, then tried installing the ROM (MiuiMiX_2.2.0_raphael_9.11.7_v11-10_20191107.zip).While installing it tells me that my Phone is Raphaelin and not Raphael. I do not know what to do.
same here always end with fastboot screen when i try to flash a custom rom or root my device via magisk 20.1
device k20 pro 8gb/256 came with mi 9 t pro rom
really appreciated if any one can post step by step to flash cusom rom or root the device
pocophone f1 was my prev device it was easierto flash custom or root
i dont know what i miss
Do not wipe system.
20.3.5
https://sourceforge.net/projects/xi...mi.eu_multi_HMNote8_20.3.5_v11-9.zip/download
20.2.27
https://sourceforge.net/projects/xi...i.eu_multi_HMNote8_20.2.27_v11-9.zip/download
https://androidfilehost.com/?fid=4349826312261733098
20.1.16
https://sourceforge.net/projects/xi...i.eu_multi_HMNote8_20.1.16_v11-9.zip/download
https://androidfilehost.com/?fid=4349826312261702715
20.1.9
https://sourceforge.net/projects/xi...mi.eu_multi_HMNote8_20.1.9_v11-9.zip/download
https://androidfilehost.com/?fid=4349826312261697819
20.1.2
https://sourceforge.net/projects/xi...mi.eu_multi_HMNote8_20.1.2_v11-9.zip/download
https://androidfilehost.com/?fid=4349826312261690375
New links will be posted here.
is it short video camera working well?
Yes. It is not crashing when we agree permission to connect to internet.
Can you please tell me the procedure? I clear cache, data and dalvik from twrp and then i install the note8 rom from eu site but i get bootloop. What do i do wrong? The phone is usable again with the global rom but i want the eu. Thanks
manolos69 said:
Can you please tell me the procedure? I clear cache, data and dalvik from twrp and then i install the note8 rom from eu site but i get bootloop. What do i do wrong? The phone is usable again with the global rom but i want the eu. Thanks
Click to expand...
Click to collapse
Did you unlock the bootloader first?
iizmotabar said:
Did you unlock the bootloader first?
Click to expand...
Click to collapse
Yes i did and then i intalled the twrp
manolos69 said:
Can you please tell me the procedure? I clear cache, data and dalvik from twrp and then i install the note8 rom from eu site but i get bootloop. What do i do wrong? The phone is usable again with the global rom but i want the eu. Thanks
Click to expand...
Click to collapse
In the TWRP before install the ROM, you must format Data
clapy71 said:
In the TWRP before install the ROM, you must format Data
Click to expand...
Click to collapse
Only Data and Im good to go?
manolos69 said:
Only Data and Im good to go?
Click to expand...
Click to collapse
Yes. In TWRP: Wipe/Format Data, after Install "yours ROM zip", then Reboot System.
clapy71 said:
Yes. In TWRP: Wipe/Format Data, after Install "yours ROM zip", then Reboot System.
Click to expand...
Click to collapse
Thank you for your time. I will do that including the magisk zip.
A last question. Is it wrong to wipe system?
manolos69 said:
Thank you for your time. I will do that including the magisk zip.
A last question. Is it wrong to wipe system?
Click to expand...
Click to collapse
IMHO : wrong.
Quote from Xiaomi.eu
"Installation
Unlock your first bootloader
Install TWRP via Fastboot mode
FORMAT /data partition (NEVER wipe System or Persist!)
Copy our ROM to the internal storage
Install our ROM
Reboot
done"
clapy71 said:
IMHO : wrong.
Quote from Xiaomi.eu
"Installation
Unlock your first bootloader
Install TWRP via Fastboot mode
FORMAT /data partition (NEVER wipe System or Persist!)
Copy our ROM to the internal storage
Install our ROM
Reboot
done"
Click to expand...
Click to collapse
I only wiped Data and the latest miui eu rom is working. I added magisk too. Thank you guys.
Does someone know why it was delayed this week?
Anyone getting regular updates on this Rom?
9.12.26 added in OP: https://xiaomi.eu/community/index.php?posts/522429
I am still om miui 11 stable 11.0.3 (original one), it is a bit laggy compared to my previous phone A2 converted to 6X, but on my previous phone I was using beta version.
Is here someone, who can confirm installing beta miui 11 improves UI experience on Note 8?
20.1.2 added in OP: https://miuipolska.pl/d/xiaomi.eu/updater/changelog/20.1.2.html
Camerado said:
20.1.2 added in OP: https://miuipolska.pl/d/xiaomi.eu/updater/changelog/20.1.2.html
Click to expand...
Click to collapse
How could update the 9.12.26 version to 20.1.2 without data loss ?
I tried to update from OTA but i got a message : your internal storage is encrypted
Jakuza001 said:
How could update the 9.12.26 version to 20.1.2 without data loss ?
I tried to update from OTA but i got a message : your internal storage is encrypted
Click to expand...
Click to collapse
Flash via OTG.
20.1.9 added in OP: https://miuipolska.pl/d/xiaomi.eu/updater/changelog/20.1.9.html