Database Develop

Moto G 2nd Gen ( XT1068) hard bricked: neither turning on, nor opened by blankflash

One morning i restarted my phone( Moto G 2nd gen.) with Android Marshmallow because it went slow, but after that it restarted in fastboot mode when i pressed the power on button. Normal startup or recovery were also not working.
I checked this forum, then unlocked the bootloader and downgraded to Android 4.4.4 . My phone operated well, then at night it started asking for lollipop update again and again, i allowed for OTA update (that was my biggest mistake), and after downloading the data and during update, my phone went off and didn't start again.
Although the indicator light glows solid for sometime when connected to wall charger or to PC via USB cable.
I have tried blankflash, ADB and fastboot utility, Volume down + Power combination, pressing power button for over 120 seconds, but all in vain.....
Please suggest me a way to solve this problems, i have important data in my phone and i want to save those too.

Welcome to the hardbrick club ^^
They all did the same mistake like you did. When you go throught the motoG Threads you will see all did the same.
The only solution is a clean flash what is not given from motorola for moto g2. The only existing is for moto g what did not work for our phones

Feel blessed, you don't have to use moto g anymore.

Anniepoo said:
Welcome to the hardbrick club ^^
They all did the same mistake like you did. When you go throught the motoG Threads you will see all did the same.
The only solution is a clean flash what is not given from motorola for moto g2. The only existing is for moto g what did not work for our phones
Click to expand...
Click to collapse
I tried with blankflash which supports android 4.4 but not 5.0, so it must be a requiring MBM-CI 5.0 ? is it available or any expected month of arrival?

aninishu said:
I tried with blankflash which supports android 4.4 but not 5.0, so it must be a requiring MBM-CI 5.0 ? is it available or any expected month of arrival?
Click to expand...
Click to collapse
. I wish I could say it was, but unfortunately Motorola won't release this file. There have been some serious attempts to solve this problem but none have succeeded.. As far as I know the only way to fix this problem is by getting a new motherboard..

Hellow
friend, do not know if motorola and released this file, or if there are already solution ?, I appreciate your answer

Diego799 said:
friend, do not know if motorola and released this file, or if there are already solution ?, I appreciate your answer
Click to expand...
Click to collapse
no blankflash.zip for our model available
if you are from india then you can try out this solution for xt1068 by an guy mobile unbrick something contact him but remember it will be paid not free
Code:
https://www.youtube.com/watch?v=WynBaVyW0oU
if you from another region then need to wait for blank flash zip

There are some methods to extract the partition layouts...one can be using dd cloning & extracting img files...another can be through B2bSupportLg Tool, also calleld BoardDiag. It does have MSM8226 chipset option, but that device is W7 G2MDS. Take a working Moto G 2014 from someone, ask them to use this tool to extract the partition schemes, then you'll get .mbn files, especially prog_emmc_filehorse_msm8226.mbn . Use that to dump into the bricked device using either QFIL Tool or use this blankflash tool, replace it's singleimage files with the one you got, then execute blank-flash.bat.
Also I had some emmc prog firehorse files, all 4 related to 8x26...You can try those & confirm me if they work or not

Unbrick Hyundai Ultra Charm (seems to be the same as BLU Vivo XL)

I'm gonna try to keep this short. My mom gave me this phone (Hyundai Ultra Charm), this comes with Android 5.0 which I think is kind of old so I tried to look for a rom. I've installed lineage on my MOTO G2 so this was my start point, but after looking for a while I found out that this phone its not popular worldwide. After researching a little bit I found out about gionne and the MTK phones and end up figuring that my phone its the same as the BLU VIVO XL. I rushed a little bit to much, started the phone in fastboot mode, unlocked the bootloader I flash a TWRP version made for the BLU VIVO XL without making any backup (I could not find any way to backup without being ROOT, and no way to root without a custom recovery mode kind of a paradox).
What happened in the end is that I could see the start Hyundai logo for a couple seconds and then it reboots itself entering in a bootloop. After researching I ended up finding of SP Flash, and I downloaded an allegedly BLU VIVO XL stock rom (named "BLU_Vivo_XL_V0070EE_60_MT6737T", because I could not find the original ROM or Recovery for my "actual" phone). When I try to flash this rom or backup mine using this scatter file I get an error saying "CHIP TYPE NOT match!! target efuse value: 0x54000000". I notice that this rom is for an MT6737T chipset when the BLU VIVO XL has an MT6753, so I'm confused.
What would it be the best course of action now??
Please HELP!

UPDATE!
So I've downloaded another stock rom named "BLU_V0030UU_V07_REPAIR.ZIP". I've been able to back up my "broken" rom and flashed the phone with the new one with success. I tried the most common features and it seems to work, so I can say that HYUNDAI ULTRA CHARM is compatible with BLU VIVO XL.

Straight to the point

The reason i am here is to ask for help. I have driven myself crazy in solving this complicated problem i have.
Ok
i own a moto g4 xt1624 and though about rooting it for all the reasons why people root.
Got the bootloader code unlocked the bootloader and installed twrp recovery file.
Went ahead and followed all the steps to install Lineage os 14.1 steps from their offical site.
Done all Flashed the file and the device is stuck on a screen now Saying :
Your device has been unlocked and can't be trusted.
ID:bad key
Tried every forum on here the device doesn't seem to connect to pc . No showing up in device manager also
Installed all moto usb and qualcomm 9008 drivers .
The device just doesn't enter into fastboot mode no matter what i do
Pls. suggest something .

namdevannistbast said:
The reason i am here is to ask for help. I have driven myself crazy in solving this complicated problem i have.
Ok
i own a moto g4 xt1624 and though about rooting it for all the reasons why people root.
Got the bootloader code unlocked the bootloader and installed twrp recovery file.
Went ahead and followed all the steps to install Lineage os 14.1 steps from their offical site.
Done all Flashed the file and the device is stuck on a screen now Saying :
Your device has been unlocked and can't be trusted.
ID:bad key
Tried every forum on here the device doesn't seem to connect to pc . No showing up in device manager also
Installed all moto usb and qualcomm 9008 drivers .
The device just doesn't enter into fastboot mode no matter what i do
Pls. suggest something .
Click to expand...
Click to collapse
Welcome to the forums
Hope this helps
Moto G4
The Moto G4 is a mid-range Android device. It comes with 5.5" FullHD IPS LCD display, 1.5GHz octa-core Qualcomm Snapdragon 617 chipset, 2GB of RAM and either 16GB or 32GB internal storage. MicroSD expansion capability is also included. The rear shooter is a 13Mp camera, while the front is a 5MP...
forum.xda-developers.com

ASUS Memopad 10 and 7 (not sure the version)

Hello.
I have a asus table memopad 10, can't boot and with power and volume up i get a 3 options menu ACK Android and Erease.
I went to a shop and they reprogrammed the rom was working until i didn't boot anymore.
Android cardh-user bootloader <1.00> released by "ww_epad-10.6.1.31-20130823" A03
Key driver not found... Booting 05
Starting Fastboot USB download protocol
Is there a possibility o install any Android rom or Linux... i have seen an article about Lineage OS 19 but i don't understand.
It's my first time venturing on tablets
Thank you.

Rah-Rah80 said:
Hello.
I have a asus table memopad 10, can't boot and with power and volume up i get a 3 options menu ACK Android and Erease.
I went to a shop and they reprogrammed the rom was working until i didn't boot anymore.
Android cardh-user bootloader <1.00> released by "ww_epad-10.6.1.31-20130823" A03
Key driver not found... Booting 05
Starting Fastboot USB download protocol
Is there a possibility o install any Android rom or Linux... i have seen an article about Lineage OS 19 but i don't understand.
It's my first time venturing on tablets
Thank you.
Click to expand...
Click to collapse
Welcome to XDA,
Hope this link helps
Asus ZenPad 10
The Asus ZenPad 10 is a 10.1" tablet with an 800x1280p resolution display. The Mediatek MT8163 is paired with 2GB of RAM and 16/32GB of storage. The primary camera has a 5MP sensor and the selfie camera is 2MP. The tablet comes in Dark Grey, Pearl White, and Rose Gold color options.
forum.xda-developers.com

orb_selektor said:
Welcome to XDA,
Hope this link helps
Asus ZenPad 10
The Asus ZenPad 10 is a 10.1" tablet with an 800x1280p resolution display. The Mediatek MT8163 is paired with 2GB of RAM and 16/32GB of storage. The primary camera has a 5MP sensor and the selfie camera is 2MP. The tablet comes in Dark Grey, Pearl White, and Rose Gold color options.
forum.xda-developers.com
Click to expand...
Click to collapse
Hi.
Found the rom for the tablet ME301T, https://forum.xda-developers.com/t/...oid-4-2-1-on-unlocked-locked-devices.2187982/
but i can't find a step by step tutorial and i can't do much... the tablet is in boot loop, can't shutdown and the boot menu i see ack( gives error) middle same and wipe also give a error.
Really i don't know what or how to do it.
The files i have are the following:
omni-4.4.4-20150521-me301t-FINAL.zip
SR5-SuperSU-v2.82-SR5-20171001224502.zip
TWRP-TF300T-2_8_1_0.zip
At this point just want android or linux......
Thank you.

Please help with recovering data from soft bricked Xiaomi Redmi Note 9 Merlin

Hi. On the start i want to apologize for any chaotic description i may give, or mistakes/unclear explanation since for first - english is not my native language and for second i'm terribly tired and depressed as a result of 2 days searching for informations how to solve my problem. Lets get to case.
Patient:
Xiaomi Redmi Note 9 (merlin), complete model "M2003J15SG", it have unlocked bootloader, no root, no custom recovery, probably no granted permisions for adb.
I'm not sure which version of rom it have at the moment i remember only that it was global.
Case:
Few days ago Xiaomi displayed notification about possible upgrade to MIUI 13. That was not the first update that i installed directly just by accepting it, so i decided to give it a go.
After that, my phone went to infinite bootloop (there is a mi logo with "powered by android" that stays there for minute, and then it reboots and situation repeats itself).
Recovery is not working (or i do it wrong -> power+ vol up, maybe it's damaged after this update) i cant get into fastboot either (power + vol down).
However when i connect to pc and press power + vol down windows makes sound of pluging and unpluging device few times (probably its a mode that i can flash it with new rom with flash tool).
If i can (probably) flash whole ROM then what is a problem? :
Main problem is, that i have there very important data there, especially text messages and there is no way i want to lose it.
To give you small tip why it is so important to me i will explain it with a bit of offtopic:
Inside of sms google app i have messages that contains crucial informations, like my ex employer incriminating messages, codes that gain me acess to meds in pharmacy, adresses and so on - i just can't lose it because at the end i could have a pretty big trouble about it, including my ex employer tring to make me a scapegoat for his own decisions in front of a law. End of offtop.
Expectations:
I've so far read that if i will have custom recovery, i would be able to make a backup of data inside of Redmi.
Then i would try to flash entire ROM, but important is that i will have that data backed up.
Since i'm not a master class when it comes to adb, flashing, and so on - i would like to ask you for help.
I mean i know how to flash rom or, unlock bootloader, or root - but i lack knowledge about subjects that matters in this particullar situation,
especially i dont know can i flash only recovery with flash tools, and if so - will it erase internal data,
where to get already prepared scatter and recovery, how to do it - i need extremaly step by step help, so i could understand it and do it.
Is it possible to flash only custom recovery with flashtools without erasing data, and if so - how?
Is it possible to flash ROM without data being erased - if so, how?
Is there any tool i should look into, or maybe when it cames to switching to recovery/fastboot i'm doing something wrong?
Is there ANY and i mean ANY way to or fix bootloop, or at least get custom recovery without permanently losing important data?
Warning:
If you need any more informations - let me know and i will post it.
I've searched with google for 2 days right now and i have no straight answer for a questions.
If i posted question that already was asked - i apologize, truly i am not able to be on highest level of my perception and thats why i would like you to explain things to me like for a 8 years old.
I would appreciate any form of help with a subject. Thank you in advance for a time, knowledge and answers.

Wrong section.
Merlin is Xiaomi Redmi Note 9 and not Xiaomi Redmi Note 9 Pro.
Try here:
Redmi Note 9S / Note 9 Pro (Indian Model)
The Redmi Note 9S / Note 9 Pro (Indian Model) is a 6.67" phone with a 1080x2400p resolution display. The Qualcomm SM7125 Snapdragon 720G chipset is paired with 4/6GB of RAM and 64/128GB of storage. The main camera is 48+8+5+2MP and the selfie camera is 16MP. The battery has a 5020mAh capacity.
forum.xda-developers.com

VD171 said:
Wrong section.
Merlin is Xiaomi Redmi Note 9 and not Xiaomi Redmi Note 9 Pro.
Try here:
Redmi Note 9S / Note 9 Pro (Indian Model)
The Redmi Note 9S / Note 9 Pro (Indian Model) is a 6.67" phone with a 1080x2400p resolution display. The Qualcomm SM7125 Snapdragon 720G chipset is paired with 4/6GB of RAM and 64/128GB of storage. The main camera is 48+8+5+2MP and the selfie camera is 16MP. The battery has a 5020mAh capacity.
forum.xda-developers.com
Click to expand...
Click to collapse
Edited - you are right, that's not "Pro", but merlin still. And for sure not indian.

I've updated to MIUI 13 too and I lost all my data too.
I've inspected the problem.
After upgrade to MIUI 13, it modifies the encryption keys for decrypting contents.
So, if you didn't backup these keys, there is no possibility for recovering.

VD171 said:
I've updated to MIUI 13 too and I lost all my data too.
I've inspected the problem.
After upgrade to MIUI 13, it modifies the encryption keys for decrypting contents.
So, if you didn't backup these keys, there is no possibility for recovering.
Click to expand...
Click to collapse
I think that i should at least try to access data since i've seen a lot of weird stuff that shouldnt work in some way, but did.
Would you be kind enough to tell me - is there a way to flash TWRP with flash tool in download mode without touching data partitions?
And if it is, can you explain to me how to do it or give me some link particullary to files for my model (recovery and scatter)?
This MIUI 13 update really surprised me in a bad way, it's even worse to hear i'm not the only one with that problem

VD171 said:
I've updated to MIUI 13 too and I lost all my data too.
I've inspected the problem.
After upgrade to MIUI 13, it modifies the encryption keys for decrypting contents.
So, if you didn't backup these keys, there is no possibility for recovering.
Click to expand...
Click to collapse
Can you please guide me specifically?

try reflashing boot and recovery in fastboot.