Today I flash Pixel Experience 11 in Sanders. After that, I,m unable to open JioSaavn. When I try to open the Jio Saavn app, my phone restart. What is the reason and how to solve this?
Related
Hi guys,
I installed MIUI 8 through TWRP, but didn't quiet like it, so I decided to try out other ROM's like Lineage OS, but none of them would install. When I tried to reboot using MIUI which was still installed, I couldn't use the keyboard anymore, so I decided to go back to TWRP and install the SuperUser Version of EUI I have already used for quiet a while. It installed correctly, but when I rebooted my phone, MIUI somehow tried to boot again. I went back to TWRP, installed EUI, but when I rebooted, MIUI tried to boot again. The big issue is that MIUI can't really start up which means that the start screens just keeps rotating, but nothing else happens. Does anybody have an idea how to solve that problem? I never experienced such an issue. Thanks!
I solved it by just trying it multiple times. I didn't really reach my target, but at least my device is usable again.
It is not available
Hello everyone, i have a Little problem, i'm actually on latest aex mod 8.1 and everytime i try to install a miui based rom (epic and masik) installation is going fine, boot too but i'm stuck with a message telling me that encryption was unsuccessfull a message pop ups to restart phone and perform a Factory reset to solve this issue.i hit the button, phone restart to twrp wipe automatically data i guess (don't really remember) and reboot and again the same message. I've never encrypted my device and twrp dosn't ask me for a password. I've only set a fingerprint with pin code to secure my phone. Still i could restore my aex backup with twrp.
Anyone could explain whats going on?
Édit: same error if i try to install RR 7.1 it tells me that encryption (not decryption) was interrupted and had to reboot to twrp and restore a back up. I'm really confused
So after flashing a few roms my sensors became corrupted I found out u need to flash persist to fix them but after I did that the popup camera started freaking out it keeps trying to close itself when it already closed it keeps telling me to calibrate it but after I do that it says could not calibrate I flashed persist through twrp. Right now I really don't know what to do can anyone help me fix this please
EI understand that persist must be flashed together with a factory reset (initial miui configuration)
Reflash your stock miui with miflash (dont lock bootloader). Boot miui up, open the camera app and it will say "calibrating camera" then it will be ok.
So....... here's what happened, every time I flash my Gapps package with my Android 10 rom, the phone boots and then the android setup comes up as usual. The problem starts when I hit "START"...... It says - android setup has stopped working.
happens everytime I flash android 10 apps........ Doesn't happen like this with pie Roms or Gapps!!!!
For any genius out there please solve this problem!!!!
Thanks in advance!!
∆D!n0 said:
So....... here's what happened, every time I flash my Gapps package with my Android 10 rom, the phone boots and then the android setup comes up as usual. The problem starts when I hit "START"...... It says - android setup has stopped working.
happens everytime I flash android 10 apps........ Doesn't happen like this with pie Roms or Gapps!!!!
For any genius out there please solve this problem!!!!
Thanks in advance!!
Click to expand...
Click to collapse
try different Gapps or use core version of Nikgapps, that doesn't have setup
Hi mate... need your help so badly,
my M21 is stuck at the bootloader unlocked screen. Can't do anything more than restarting the phone by pressing Vol down + power. Doesn't detect from PC. Can't get into download mode or anything else. this happened while I'm flashing the TWRP and trying to restart the phone into recovery mode. please help.....
Did you resolve this?
hey did you solved the issue ? and how please. I have managed to flash firmware using odin but still stuck at the bootloader warning. What should I do ?? anyone ?
indike114 said:
Hi mate... need your help so badly,
my M21 is stuck at the bootloader unlocked screen. Can't do anything more than restarting the phone by pressing Vol down + power. Doesn't detect from PC. Can't get into download mode or anything else. this happened while I'm flashing the TWRP and trying to restart the phone into recovery mode. please help.....
Click to expand...
Click to collapse
Hey I have the same issue. I have tried Odin to flash stock firmware also repartitioned the phone using Odin but did not solve the Issue . Please can anyone help us?
Also can you remember what you did before getting stuck cause I did nothing wrong . Opened the maps And gave the permission to use location after that calibrated the compass and phone hung on me from then it is on that warning screen
rajhridoy said:
Hey I have the same issue. I have tried Odin to flash stock firmware also repartitioned the phone using Odin but did not solve the Issue . Please can anyone help us?
Also can you remember what you did before getting stuck cause I did nothing wrong . Opened the maps And gave the permission to use location after that calibrated the compass and phone hung on me from then it is on that warning screen
Click to expand...
Click to collapse
Bro i have also same problem when I was flashing twrp through Odin .
My phone is stucking on twrp twrp is blinking again and again.also when I try to go to the download mode it automatically comes to bootloader and then to twrp please bro help if have fixed it
I was just speaking to a phone retailer and he told me how Shamshung M-series phones are getting locked by OEM manufaturer automatically within 6-7 months of usage (he was ready to show me evidence also so I believed him) , he said there is no solution to this So pls guys just an advice DO NOT CONNECT YOUR PHONE TO INTERNET FOR ANY OEM UPDATES,
1> TRY TO BUY PHONE FROM ONLINE STORE (BECAUSE RETAILER WILL FORCEFULLY UPDATE THE PHONE EVEN IF YOU TELL THEM NOT TO UPDATE)
2> FIRST, DONT PUT IN ANY SIM CARD IN SIM TRAY
3> SECOND, DISABLE WiFi (DONT SAVE ANY WiFi PASSWORDS) & TURN ON AIRPLANE MODE
4> THIRD, TURN ON DEVELOPER OPTIONS- USB DEBUGGING "ON" & DISABLE "KEEP MOBILE DATA ALWAYS ON" UNDER DEVLOPER OPTIONS
5> FOURTH, USE "DEBLOAT LIST" ATTACHED BELOW TO UNINSTALL INSTALLED APPS USING ADB
6> FIFTH, ONLY CONNECT TO WiFi FOR FEW SECONDS SO THAT THE OEM UNLOCK OPTION IN DEVELOPER OPTIONS GETS GREYED OUT.
7> SIXTH, FLASH ODIN-TWRP TAR FILE, WIPE/FORMAT DATA, BOOTLOGO PATCHER ZIP, MAGISK 24.3 ZIP, PRISH KERNEL (OR ANY KERNEL OF CHOICE), THEN FLASH TOTSUKA/PIXIE/CLEAN_OS/CrDroid10 (ONLY 3 STOCK-BASED ONEUI ANDRO 11 ROMS AVAILABLE, NO CUSTOM-BUILT NON-ONEUI ANDRO 11 ROMS AVAILABLE NOT EVEN M30S PORT ROM), VBMETA IMG
8> REBOOT TO TWRP, WIPE DATA
9> AFTER DEVICE BOOTS FIRST THING IS DISABLE WiFi & TURN ON AIRPLANE MODE, INSTALL NETGUARD FIREWALL APK THROUGH PACKAGE INStALLER (ALWAYS KEEP NETGUARD ON THROUGHOUT THE PHONE LIFETIME OTHERWISE SHAMSHUNG OTA MIGHT KILL THE DEVICE),
10> DEBLOAT BUILT-IN GAPPS USING ADB
11> INSTALL MICRO-G FROM TWRP
#NOTE: FOR FACTORY RESET SCENARIO REPEAT STEPS 10 & MAYBE 11 TOO.
AVOID VISITING OR USING OEM WEBSITES AND APPS. REMEMBER, FOR GUGLE EVERYONE IN THE WORLD IS A POTENTIAL TERRORIST.