{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 12.0
Warning:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
BUGS:- bluetooth ear/headphones do not work workaround- ( go into phh treble settings misc features and enable force-disable a2dp offload)
If bluetooth crashes your system disable media recommendations under Sound & Vibration > Media > Show media recommendations
mtp not working
sim 1 incoming and outgoing does not work (you can revieve calls and call but you wonth hear anything nor will your mic go trying to fix) (workaround is to put your sim into slot 2)
offline charging don't work, it would keep looping the charging screen (May happen, may not happen, if it happens to you, just press vol down and power everytime you want to charge your phone to reboot it to system. Charge only in SYSTEM and RECOVERY, as prolonged charging screen loop can cause burn-in.
Instructions on how to install (read carefully):
1. Make sure you already have your bootloader unlocked, TWRP flashed.
2. Unpack the "xz" or "zip" archive and put the .img file onto the sd card or internal (if you dont have a sd card do step 3 then transfer the img file to your phone)
3. In TWRP head to factory reset format type yes and hit enter
4. Flash the img file (as system obviously)
4.1 Install the custom kernel that I recommend, most stable and not going to mess up your device (optional)
5. install magisk (the one linked below only, others WILL NOT WORK) (optional)
6. Reboot and enjoy!
Magisk:
https://github.com/topjohnwu/Magisk/files/7819803/app-debug.zip
ROM:
Mod Edit: DL link removed.
Recommended Custom Kernel:
Stable kernel
Kernel source: https://github.com/TheLinuxAdmin/Eng_kernel_a70q
Enable fast charging: Fast charging magisk module and choose 4500mah 27w
FOR THOSE WHO HAVE FLASHING ISSUES / ROM BOOTLOOP / BOOTS INTO FASTBOOT:
TigerBootFix 1.1.1
Apparently there is an issue with devices not being able to flash ANY GSIs and if you do it would boot you into fastboot mode. If you have this kind of issue, try this:
https://forum.xda-developers.com/attachments/vendor_a11-zip.5518175/ - use Android 11 Vendor. Flash the zip via twrp.
IF IT STILL DOESN'T WORK!
install oneui via odin, boot into oneui change date to 3 months from now
check for updates and then go to developer mode and tap on OEM Unlock
boot into download mode
flash twrp and vbmeta (or a custom recovery that works with android 12, like twrp 3.6)
boot into twrp
do format data
flash multidisabler
flash rom
flash kernel as boot
do factory reset
reboot
if it boots you into fastboot shutdown flash twrp only via Odin and try another factory reset and reboot (In twrp)
For maximum performance (Battery life will not be affected):
TigerTweaks 3.0: FDE AI but BETTER!
Ktweaks is no longer used, just FDE AI and GMS Doze.
Step 1
- Uninstall ANY OTHER KERNEL MANAGER app including smartpack/Ktweaks to avoid conflict, since this app uses AI and machine learning to dynamically boost performance when needed
- Install FDE AI Magisk Module to make it a system app, thus it will work better and removes all kernel locks from OEMs (I'm looking at you, Samsung) https://github.com/feravolt/FDE.AI-docs/releases/download/12.4.1m/FDE.AI-as-system-app.MAGISK.zip
- Update FDE AI to the latest version by downloading the latest APK here, since the fde ai magisk module will only install fde ai 12.4.1, not the latest version: https://github.com/feravolt/FDE.AI-docs/releases
- Move to the bottom of the screen and select AI Chat, then type /advancedai (no space, no uppercase letters). This will going to make the AI more effective, without you having to do anything.
- Go to the settings tab and use the AUTO settings for FDE AI.
Why not performance? Why not powersave?
Well, by setting the FDE to stick to max performance or power savings at all times, youre missing out the one key advantage that FDE has. Which, the AI can shift between performance and power savings (or even in between depending on the load) in real time. If your phone is on idle, FDE would go into Automatic/Power Saving mode, and if you're playing your favourite game or is doing a heavy task, FDE would go into Automatic/Performance mode. So, you will get performance ONLY when you need it. If your phone is on idle, it would switch fde to powersave, thus saving a ton of battery life!
- Tap on boost heavy games, force doze, and disable throttling.
NOTE: Only disable throttling on NON OC KERNELS! Disabling throttling in OC KERNELS can lead to overheating!
- Good features to keep in mind:
1. /gamelistadd package name
You can add your own heavy game here! For example, if you play war robots, go look at the package name for War Robots, and then enter the package name (for war robots it's com.pixonic.wwr) because your game might not be listed on the heavy games list! Though this is not strictly necessary as FDE AI can detect if you're under heavy GPU/CPU load while playing games, so FDE can adjust to Automatic/Performance which will boost your game, even if it's not included in the heavy games list.
2. /downscale
You can downscale your resolution without having to adjust fiddly DPI settings! The AI would work on everything for you to scale it adaptively, so no risk of soft bricking!
For example:
Downscale 540 for 540p (qHD)
Downscale 720 for 720p (HD)
Downscale 1080 for 1080p (FHD)
Downscale 1440 for 1440p (QHD)
Downscale 2160 for 2160p (4K)
Step 2
- Install GMS doze magisk module. Helps to reduce power consumption of google play services which will increase performance and extend battery life.
Credits:
Phhusson Pixel experience team
Ponces Development
Zainullahk1234 Thread, Optimization, and bug fixes
double tap to wake fixed in new build!
also notification bar is now white and so is power menu in light mode this is subject to change
reserved
this is just a mirror of the a71 thread for bugs report here https://forum.xda-developers.com/t/...ience-for-a71-all-models-fod-working.4377973/
Zainullahk1234 said:
this is just a mirror of the a71 thread for bugs report here https://forum.xda-developers.com/t/...ience-for-a71-all-models-fod-working.4377973/
Click to expand...
Click to collapse
yes, but since it is a gsi I am going to share it to ppls who need the ROM for their devices that dont get android 12, GSIs are designed to work with any device and I tested it works on a70 too.
TigerLake said:
yes, but since it is a gsi I am going to share it to ppls who need the ROM for their devices that dont get android 12, GSIs are designed to work with any device and I tested it works on a70 too.
Click to expand...
Click to collapse
how did you make it to work, because on my a70 model keeps bootlooping after installing the rom
i'll try
i get pushed into the download mode
Der_Googler said:
i get pushed into the download mode
Click to expand...
Click to collapse
Bogdan2376 said:
how did you make it to work, because on my a70 model keeps bootlooping after installing the rom
Click to expand...
Click to collapse
do format data
flash rom
flash kernel (optional)
flash magisk (optional)
do format data again
reboot
is still the same issue -_-
Wanted to say a few things:
1. This is GSI nay?
2. It will only boot with Android 11 vendor for now
3. Try to find the vndklite variant, it allow for read-write system which is very useful later on
JakunTech1010 said:
Wanted to say a few things:
1. This is GSI nay?
2. It will only boot with Android 11 vendor for now
3. Try to find the vndklite variant, it allow for read-write system which is very useful later on
Click to expand...
Click to collapse
1 yes
2 it boots on a10 and it is better if you have a10
3 no that uses a lot of storage and i dont support it it can also have more bugs so im not supporting it
is this only for android 12? i installed this to my a70 android 11 and doesn't work. i follow the process of installing it and i got bootloop sometimes it put me in download mode.. and when i exit i found that there is no os installed in the warning of TWRP.. thanks for this. i hope this work to my device in the future
Eu Sunt Dracul said:
is this only for android 12? i installed this to my a70 android 11 and doesn't work. i follow the process of installing it and i got bootloop sometimes it put me in download mode.. and when i exit i found that there is no os installed in the warning of TWRP.. thanks for this. i hope this work to my device in the future
Click to expand...
Click to collapse
it should work with android 11 but that is unkown
try this:
flash system
flash kernel
flash magisk
do format data
do factory reset
reboot
Zainullahk1234 said:
it should work with android 11 but that is unkown
try this:
flash system
flash kernel
flash magisk
do format data
do factory reset
reboot
Click to expand...
Click to collapse
do you mean by flashing the system is i need to flash the .zip?
Eu Sunt Dracul said:
do you mean by flashing the system is i need to flash the .zip?
Click to expand...
Click to collapse
no the img
Zainullahk1234 said:
no the img
Click to expand...
Click to collapse
after i flash the .img, i flash the kernel and it gives me error "failed to mount 'system_root' (Invalid argument).
Eu Sunt Dracul said:
after i flash the .img, i flash the kernel and it gives me error "failed to mount 'system_root' (Invalid argument).
Click to expand...
Click to collapse
reflash stock rom change date to 2 months from now flash twrp and try agin
Zainullahk1234 said:
reflash stock rom change date to 2 months from now flash twrp and try agin
Click to expand...
Click to collapse
do you mean stock rom is the original rom of a70? or can i flash my downloaded lineageOS 18.1?
Zainullahk1234 said:
reflash stock rom change date to 2 months from now flash twrp and try agin
Click to expand...
Click to collapse
alright i got the stock rom, is the flashing tool i will use is odin. right?
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the NightOwl LineageOS 15.1 Android 8.1.0 Beta3 built from source for the Galaxy Note 1 GT-N7000/GT-N7000B
This LineageOS 15.1 based ROM is in Beta state and not ready for all day usage.
The main functions are working but there will be bugs!
Code:
Use my Roms only if you are sure about the risks of flashing custom Roms/Kernel to your device. I'm not responsible for any damage caused by using one of my files.
NOTE:
Because of the Rom Size and the ART runtime since Android 5 all Apps will need more space. If you want to install the rom together with Gapps you need to repartition your internal storage.
You can find more informations in the Howto Install section.
Changes:
Beta3:
* Updated los sources
* August security patches
* Fix mic-gain when multiple input streams are used
* Go settings without lowram flag set
* Acelerometer fixed
Older Changes:
Alpha2:
* Updated los sources
* April security patches
* First start wizard is working with installed gapps
* Youtube is working
* Added power profile settings
* Video playback mostly working
* Whatsapp videocalls working
Alpha1:
* First public release
Known Bugs Beta3:
* Installed gapps will cause a battery drain about 10%/h in standby
A part of the battery drain is caused by Wifi scanning which keeps Wifi always active.
Turn Wi-Fi Scanning off here: Settings -> Security & Privacy -> Location -> Scanning ->Wi-Fi scanning
This will reduce the battery drain but still something other (Ril?) is draining the battery too.
* If you get asked to instal/fix root/supersu in the recovery select no!
* Usb dialog not working. you can enable mtp mode in the developer settings
* Adoptable storage is not working (don't format your sdcard as internal!)
* Because of the rom size you need to repartition your /system and /data partition if you want to install gapps
How to Install:
If you are running a custom Kitkat(4.4) or newer Rom:
1. Copy Rom + Google Apps + recovery-twrp3.1.0-build2-isorec-n7000.zip + lanchon-repit-20170115-system=1536M+keep-data=6G+keep-sdcard=max+keep-preload=same+keep-n7000.zip to your external sdcard
2. Boot into recovery
3. Factory Reset + Format the /system partition
4. Flash the Rom zip file (without gapps in this step)
5. Flash recovery-twrp3.1.0-build2-isorec-n7000.zip
6. Reboot the recovery to enter the twrp isorec recovery
7. Flash lanchon-repit-20170115-system=1536M+keep-data=6G+keep-sdcard=max+keep-preload=same+keep-n7000.zip (Read the instructions in How to repartition your device!)
8. Flash gapps
9. Reboot
The steps to install it from an stock samsung rom are:
If you have already an samsung 4.1.x running you can skip step 1
1.flash N7000ZSLR1_N7000OZSLR1_BRI (or any other other 4.1.2) stock rom using odin
2.Copy Rom + Google Apps + recovery-twrp3.1.0-build2-isorec-n7000.zip + lanchon-repit-20170115-system=1536M+keep-data=6G+keep-sdcard=max+keep-preload=same+keep-n7000.zip to your external sdcard
3.flash PhilZ-cwm6-XXLT6-XSA-5.06.1.tar.md5 (https://www.androidfilehost.com/?fid=745425885120702299) to get cwm recovery with odin
4. boot into recovery
5. flash this kernel http://forum.xda-developers.com/devdb/project/dl/?id=20863 to get an updated recovery
(this step will make your old rom unbootable stuck in the n7000 screen but you can boot into recovery with press and hold "home" and "volume+" buttons and power on your phone)
6. you need to reboot! your device now to recovery
7. you are now in the updated recovery and you need to do a factory reset + format the /system partition
8. Flash the Rom zip file (without gapps in this step)
9. Flash recovery-twrp3.1.0-build2-isorec-n7000.zip
10. Reboot the recovery to enter the twrp isorec recovery
11. Flash lanchon-repit-20170115-system=1536M+keep-data=6G+keep-sdcard=max+keep-preload=same+keep-n7000.zip (Read the instructions in How to repartition your device!)
12. Flash gapps
13. Reboot
Updating If you are running an earlier NightOwl LineageOS 15.1 alpha version:
1. Copy Rom + recovery-twrp3.1.0-build2-isorec-n7000.zip + lanchon-repit-20170115-system=1536M+keep-data=6G+keep-sdcard=max+keep-preload=same+keep-n7000.zip to your external sdcard
2. Boot into recovery
3. Flash recovery-twrp3.1.0-build2-isorec-n7000.zip
4. Reboot the recovery to enter the twrp isorec recovery
5. Flash lanchon-repit-20170115-system=1536M+keep-data=6G+keep-sdcard=max+keep-preload=same+keep-n7000.zip (Read the instructions in How to repartition your device!)
6. Flash the Rom zip file
7. wipe dalvik cache
8. Reboot
How to repartition your device:
Because of partition size limitations you need to repartition your device to fit the rom together with gapps on the /system partition.
My example repit file (in the Downlodas section) will also enlarge the /data partition because the default size is to small for android 5+ if you want to install some apps.
Lanchon has made a tool which makes it possible to repartition your device in the recovery without loosing your data
https://github.com/Lanchon/REPIT
You need to have a working TWRP Recovery (CWM and Philz will not work)!
Make sure that you have at least 5GB free space on your internal sdcard0 before you start!
Make sure that your battery is charged and connect your device to the charger because repartitioning can take some time!
Installing the repit zip from the sdcard will fail the first time (because the sdcard is in use and can't unmounted) but the file gets copied to /tmp in this step.
After this select the repit zip to install from /tmp again and it should work
How to enable root:
1. Go to Settings-System-About phone and tip 7 times on Build number to enable the Developer options
2. Go to Settings-Developer options-Root access and set it to Apps and ADB
Don't install supersu (it will give you a boot loop!)
Downloads:
LineageOS 15.1 Beta3:
https://www.androidfilehost.com/?fid=3700668719832239373
Google Apps for lineage 15.1 (Use only after you have repartitioned your device! Suggested versions: micro, nano or pico):
http://opengapps.org/?arch=arm&api=8.1&variant=nano
Recovery flashable TWRP 3.1.0-0 build2 recovery (IsoRec)
https://www.androidfilehost.com/?fid=11050483647474832011
lanchon-repit-20170115-system=1536M+keep-data=6G+keep-sdcard=max+keep-preload=same+keep-n7000.zip
https://www.androidfilehost.com/?fid=11050483647474832009
Older Versions:
LineageOS 15.1 Beta2:
https://www.androidfilehost.com/?fid=11050483647474833224
LineageOS 15.1 Beta1:
https://www.androidfilehost.com/?fid=11050483647474832010
LineageOS 15.1 Alpha2:
https://forum.xda-developers.com/devdb/project/dl/?id=29271
LineageOS 15.1 Alpha1:
https://forum.xda-developers.com/devdb/project/dl/?id=29024
A big THX to:
LineageOS Team
rINanDO (Many parts in this Rom are based on his work for the i9100)
forkbomb444
XDA:DevDB Information
[ROM][LineageOS15.1][Oreo][Android 8.1.0] NightOwl Beta3, ROM for the Samsung Galaxy Note GT-N7000
Contributors
bauner
Source Code: https://github.com/bauner
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.0.x
ROM Firmware Required: Kitkat(4.4) or newer compatible custom recovery
Based On: LineageOS
Version Information
Status: No Longer Updated
Current Beta Version: Beta3
Beta Release Date: 2018-08-12
Created 2018-03-30
Last Updated 2019-03-07
Awesome news incredible history. Many thanks Dev @bauner
Sent from my Redmi 4X using XDA Labs
Thanks a lot for the Rom @bauner
Clean flashed it on my GT-N7000 now and so far couldn't find any bugs that aren't known yet
Since it's my 2nd Phone I can't test anything RIL related but I'll try to check for any other bugs.
Do you know if we'll ever be able to install Magisk to our Note / What's the reason that we can't install it? I've read something about our Devices Ramdisk being different.
Dear bauner
Wow! Thank you so much!
Sincerely
Oh my!!! @bauner you're an absolute legend! Can't thank you enough for giving us the opportunity to try out the latest and greatest version of Android on our beloved Galaxy note!
I'll give it a try in a few days. I'm so excited. Thanks so much.
Cheers ?
whew my eyes...
btw first time trying f2fs installation on n7000, and it booted (unexpected as I see most of n7000 rom thread wrote nothing on f2fs support) gonna try it out
phone seems couldn't power on while charging with this kernel. Nice charging screen tho, love it
Thanks Bauner
EDIT: It seems won't boot (stuck at the charging screen) only if the battery is too low.
EDIT 2 : I don't know whether this is because of f2fs or what, I can feel that it performs much better than nougat (i mean on first boot of both rom)
Kiddos like screenies ~ :3
The lines in screenshot only applies to screenshot file - see statement by OP in first post
Thank you Bauner!
Thank you alot Bauner❤❤❤
Bugs I've seen so far since yesterday
•Youtube video playback broken (i can watch youtube on gello)
•Split screen
•occassional signal loss which requires reboot to be back again
•camera picture settings
•no signal sometimes whenwver i reboot, i have to reboot again for the aignal to come back
haveyouseenthisboi said:
Bugs I've seen so far since yesterday
•Youtube video playback broken (i can watch youtube on gello)
•Split screen
•occassional signal loss which requires reboot to be back again
•camera picture settings
•no signal sometimes whenwver i reboot, i have to reboot again for the aignal to come back
Click to expand...
Click to collapse
The youtube video problem is known
The rom is a android go build which does not support split screen
Can you reproduce the signal loss or will it happen randomly?
Which camera setting will not work for you?
Can't test it in this level (Daily phone and all)
just wanted to say thank you Bauner for supporting Note!
haveyouseenthisboi said:
Bugs I've seen so far since yesterday
•Split screen
Click to expand...
Click to collapse
Split screen works perfectly, but to use split scrren, you need to set the low ram flag in build.prop to false
*You will notice a slight change in ui such as recents and screen off animation
Oh i found out that it was not really a signal loss but a random no simcard. It is random everytime i reboot the phone. I have to reboot again for the system to "detect" the sim again
haveyouseenthisboi said:
Oh i found out that it was not really a signal loss but a random no simcard. It is random everytime i reboot the phone. I have to reboot again for the system to "detect" the sim again
Click to expand...
Click to collapse
Welp I also face this problem since months ago (during last year, running rros nougat)... Tried several time of clean install of nougat but didn't help, even with a different sim. Hopefully as for now the issue has not come back again for me on los15.
I tot I'm the only one facing this issue ._. as I'm expecting this is hardware related problem. I'm highly confident this is not software related. My sis and my mom they both using n7000 as daily driver with rros nougat running since clean install during earlier last year, and they didn't hv this/any problem until now. (My mom make many phone calls everyday. ) Guess should be due to the worsening condition of the modem chip, maybe is because of the heat released from CPU is too much?
Interestingly I only got the no sim bug on bauner's cm12 and los15.1
Seems like it was unable to boot sometimes, when the phone is charging, even when it already charged full. Best to remove charger and boot. Else sometimes it will stuck at charging screen, then will need to reboot by long pressing the power button.
Sometimes shutdown or reboot, it will like stuck for a moment before reset.(should be kernel related?) Like if in TWRP, if press reboot, it will stuck there for around 5 seconds or more, in my case 15 seconds longest, before it really reset.
There's no thermal sensors detected. Can't see the temperature of system.
Until today still smooth like hell. No idea why haha I'm using lowram flag = false.
Surprisingly there aren't any MTP Host related FC Dialog anymore 0.0 I will try out MTP soon.
Overall, what a legend! Thanks OP! It seems like it is a joke to tell people that note 1 is running Oreo :laugh:
But not.
Is there any way to get trusted face without mano gapps
ritik jaiswal said:
Wanted to flash nano gapps
In Pico no voice assistant, no voice unlock, no face unlock
Neither the Google app
Is there any way
Click to expand...
Click to collapse
With the default /system partition size you will not have enough free space to install nano gapps.
To fit bigger gapps as pico with lineage 15.1 you need to repartition the /system partition too.
https://forum.xda-developers.com/showpost.php?p=66341193&postcount=2071
bauner said:
With the default /system partition size you will not have enough free space to install nano gapps.
To fit bigger gapps as pico with lineage 15.1 you need to repartition the /system partition too.
https://forum.xda-developers.com/showpost.php?p=66341193&postcount=2071
Click to expand...
Click to collapse
Thank you for this.
Anyways, my internal storage shows as corrupted in 8.1.0. Not able to access it. Did I miss something?
Apart from this, everything is working great! Thank you once again for keeping this phone alive @bauner.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you
I've put a huge amount of time and effort in this SOLO project (no other dev has been involved), so respect me and respect my work. You are NOT allowed to use this rom, its vendor or any of the other files included as base for your projects.
FEATURES
OneUI 2.0 under Android 10, ported from the SM-A750FN
All G610 variants should be supported
Arm64 with Treble support
Fully deodexed
SIMPLE-KERNEL included, compiled from A600FNXXU5CTB9 sources. Built permissive
Deknoxed, debloated, and removed all samsung useless security stuff in rom and kernel level
N20 multi CSC with additional features (call recording, etc)
And many more!
KNOWN BUGS
Light in capacitive buttons for those devices with hardware buttons
Some 3rd camera apps like footej don't work. Whatsapp video calls could be bugged too. If so, use Whatsapp business
Other inherent bugs from OneUI and/or 7870 limitation
You tell me
DOWNLOAD
Current version: 6.0 (02/12/2020)
More info in 2nd post
INSTALLATION
Vendor partition is required.
Wipe system, data (clean install mandatory), vendor, dalvik&cache and cache
Flash rom zip
Reboot
First boot will take much time, be patient
SCREENSHOTS
https://imgur.com/a/Q5Ysvoz
ROOT
Flash Magisk canary. Stable Magisk will give bootloop.
SUPPORT
Telegram group
CREDITS
Me, for infinite hours spent with this project
Special thanks to @ananjaser1211, @SPARTANICUS and @Valera1978 for their huge contribution to the 7870 development
Thanks to my testers and @neel0210 for camera rework
And thanks one more time to @SaiFurR for his design work with banner
@topjohnwu for Magisk
DONATIONS
I don't need them, I don't need coffees or beers. I really hate see here people with high end devices asking for donations, but you can still donate money to charity. Donate money or simply help people that is really needed. If you like this rom you can make me very happy just pushing THANKS
XDA:DevDB Information
H-ROM A7 PORT, ROM for the Samsung Galaxy J7
Contributors
Astrako
Source Code: https://github.com/samsungexynos7870/android_kernel_samsung_exynos7870/tree/simple_q_permissive
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: Oreo bootloader
Version Information
Status: Stable
Current Stable Version: 4.0
Created 2020-07-19
Last Updated 2020-08-27
H-ROM A7 PORT V6.0 (02/12/2020)
November security patch
Fixed Dual sim detection
Added High Perfomance mode
Setting volume in different apps should be fixed
You will need around a 3100Mb system partition, so if you dont have it, go and flash my repartition script
GoogleDrive folder
Mega
Md5: a9f3cacee034142024fd2802eed21b61
Spoiler: Old versions
H-ROM A7 PORT V5.0 (27/08/2020)
Spoiler: Old versions
Firmware ported from A750FNXXU4CTG2. July security patch
Added SIMPLE kernel
Echo in calls should be fixed. Other minor bugs can be present depending the phone/variant
You will need around a 3100Mb system partition, so if you dont have it, go and flash my repartition script
GoogleDrive folder
Mega
Md5: 87fc5ef5c031a2f586d762debcf7b3e0
Added a navbar enabler/disabler to the download folder
H-ROM A7 PORT V4.0 (19/07/2020)
Firmware ported from A750FNOXM4CTE3. June security patch
Specifig bugs: echo in calls
GoogleDrive folder
https://drive.google.com/drive/folders/13UG-hdqWU8nud1JCm6DD0vQXAQjeJCVP
Remember, a lot of time has been put in this project. If you like it and want to support me, no donations at all are required, just pushing thanks buttons.
Reserved
Great job
what is vendor partition? can you explain more detail? this is the first time im going to try treble rom. i dont understand what is vendor partition (what is that? is it a flashable file? or what?)
leo31 said:
what is vendor partition? can you explain more detail? this is the first time im going to try treble rom. i dont understand what is vendor partition (what is that? is it a flashable file? or what?)
Click to expand...
Click to collapse
Vendor partition is a partition that comes with treble supported phones j7 isnt one of them but with project spaget you can enable treble support on our phone so that it can install treble roms. To get the vendor partition got to this link and download the latest version (spaget x) and flash create vendor 2.0 and you will have a vendor partition.
which kernal is install ? .... i have downloaded h20 rom for g610f but i face some problem such as phone stuck and reboot automatically.... so i need to know whick kernal is installed......
Great work on the ROM
Kindly help with a working SIM Toolkit zip file for this ROM. Or anybody with a working SIM Toolkit zip file can help me with it. Thanks.
HELP! no me deja hacer vídeos llamadas en ws, en j7 prime
won't let me make video calls on
facing random reboot twice on setup screen, now it boot. no flash light on camera (light burst from screen?) like stock oreo.
hyperlapse - wide selfie nor working
i dont even know what is hyperlapse
@Astrako will you keep H-ROM A7 and S20 versions support simultaneously?
Adriano-A3 said:
@Astrako will you keep H-ROM A7 and S20 versions support simultaneously?
Click to expand...
Click to collapse
Don't ask ?... just install the rom and enjoy bro
Mscreams said:
Don't ask ... just install the rom and enjoy bro
Click to expand...
Click to collapse
Bruh
I can't install it please get me a complete manual for install
With spaget x project get bootloop l
Without show logo cant boot
Recovery: Orange Fox
Vendor 2
G610f/ds
use vendor create v1 not v2
yahiaashraf111 said:
use vendor create v1 not v2
Click to expand...
Click to collapse
And don't need change recovery ?
Now it's OrangeFox based twrp 3.4.0
Should install spaget x?
What working :
1. Wifi
2. Mobile data
3. Hotspot
4. Bluetooth
5. Gps
6. Camera
7. Phone
8. Live drawing camera
9. screen recording
10. Almost everything are working well
But, so far i found some 'not so important' bugs :
1. Opening battery usages give me FC.
2. I cant rename, remove files inside priv-app folder, but copying files to folder inside priv-app worked.
3. Removing app which located on priv-app folder using titanium backup, did not removed the apps. After reboot, the apps are there again. (Problem number 2, i cant remove apk inside priv-app)
4. no blue-light filter (i dont use it, so i dont care)
5. Some camera feature not working (hyperlase, wide selfie, front facing camera only support 4:3 size for taking photo, but video are fine). I dont know what is the function of icon at the right side of resolution inside camera (right side of 4:3 icon)
6. Since aod is not working and im not using it, better remove it.
7. Cant change clock style on lockscren (inside phone setting), but fixed by installing lockstar
8. Screen mode inside display setting has no effect at all (even stock rom does not have that feature, so.... No problem at all)
I really love this rom! Why? Because :
1. Battery life is PERFECT
2. Performance? This rom is running perfectly smooth on UI, and also while playing game and opening apps.
3. Multitasking is great
4. Android Q on 2016 device? Hell yeah.
Please fix the 1st and 2nd problem, because i need to replace gametool apk inside priv-app folder.
Installation variant 610mn-16gb
Installation variant 610mn-16gb
1- Have prepared the Vendor.zip and revertvendor files specifically this => Spaget Treble ARM64 Vendor V3.0 Based on A750FN Vendor <= not vendor v2.0 and it is not necessary to download Exynos7870_Spaget_X-V3.0. If you want root, download the magisk provided on the first page. Also have OrangeFox-R10.1_2-Unofficial-on7xelte and a version of a preferable rom oreo available to reverse the vendor and reinstall for anything.
2- Before flash create vendor, install OrangeFox-R10.1_2-Unofficial-on7xelte and restart fox recovery, then flash create vendor, without deleting anything and restarting recovery, once in TWRP-Fx, follow the steps on the first page , wipe 1DC, 2C, 3S, 4V, 5D. Internal memory is not necessary (if you view the preload between the partitions, in this step, read notes below), once the wipe has finished, install the ROM and restart. Everything should work perfectly, (at the end of the startup, perform a hard restart before configure, and then it starts without problems, that happened to me, in particular, since generally when finishing the installation of the ROM and when rebooting it usually restarts again, in this case it did not, I start directly until hello .. and then reboot)
3- Optional, once the startup is configured, restart TWRP-FX and flash magisk.
Notes: At the beginning, you could not install any ROMx64, or you needed the vendor partition, you can check the following: when you install TWRP 3.3 and when you start TWRP, the following appears in red letters at the top: “recovery is not seandroid enforcing… .. etc ”it only comes out with twrp from version 3.3, definitely you will not be able to install any rom x64, gsi, etc, since you don't have to get any errors or messages. It means that also like mine you have the smartphone since marshmallow 6.0 and it was root with supersu and odin, and you were making updates from that version; solution: restore with stock Firmware android 8.1 via odin all the partitions (BL-AP-CP-CSC-USERDATA) can be found on the network and downloaded according to your country, but always being oreo stock 8.1. Once this is done, install TWRP 3.2 with odin and then root with magisk latest stable version, not the one provided here. After that, you will be able to install several roms that you could not previously and will not have problems with the vendor, create and revert if you want. Some only install the AP to fix, but I decided on a full restore and start from scratch.
PD: I felt the need to share this experience with you so that those who have the 610mn and have problems can install it without problems, always remember to back up your important data before flashing and having a good battery charge *GOOGLE TRANSLATE*
RODRI2688 said:
Installation variant 610mn-16gb
1- Have prepared the Vendor.zip and revertvendor files specifically this => Spaget Treble ARM64 Vendor V3.0 Based on A750FN Vendor <= not vendor v2.0 and it is not necessary to download Exynos7870_Spaget_X-V3.0. If you want root, download the magisk provided on the first page. Also have OrangeFox-R10.1_2-Unofficial-on7xelte and a version of a preferable rom oreo available to reverse the vendor and reinstall for anything.
2- Before flash create vendor, install OrangeFox-R10.1_2-Unofficial-on7xelte and restart fox recovery, then flash create vendor, without deleting anything and restarting recovery, once in TWRP-Fx, follow the steps on the first page , wipe 1DC, 2C, 3S, 4V, 5D. Internal memory is not necessary (if you view the preload between the partitions, in this step, read notes below), once the wipe has finished, install the ROM and restart. Everything should work perfectly, (at the end of the startup, perform a hard restart before configure, and then it starts without problems, that happened to me, in particular, since generally when finishing the installation of the ROM and when rebooting it usually restarts again, in this case it did not, I start directly until hello .. and then reboot)
3- Optional, once the startup is configured, restart TWRP-FX and flash magisk.
Notes: At the beginning, you could not install any ROMx64, or you needed the vendor partition, you can check the following: when you install TWRP 3.3 and when you start TWRP, the following appears in red letters at the top: “recovery is not seandroid enforcing… .. etc ”it only comes out with twrp from version 3.3, definitely you will not be able to install any rom x64, gsi, etc, since you don't have to get any errors or messages. It means that also like mine you have the smartphone since marshmallow 6.0 and it was root with supersu and odin, and you were making updates from that version; solution: restore with stock Firmware android 8.1 via odin all the partitions (BL-AP-CP-CSC-USERDATA) can be found on the network and downloaded according to your country, but always being oreo stock 8.1. Once this is done, install TWRP 3.2 with odin and then root with magisk latest stable version, not the one provided here. After that, you will be able to install several roms that you could not previously and will not have problems with the vendor, create and revert if you want. Some only install the AP to fix, but I decided on a full restore and start from scratch.
PD: I felt the need to share this experience with you so that those who have the 610mn and have problems can install it without problems, always remember to back up your important data before flashing and having a good battery charge *GOOGLE TRANSLATE*
Click to expand...
Click to collapse
Hello
Thanks for your help
This installation help isn't for F variant?
SyntaxDroid said:
Hello
Thanks for your help
This installation help isn't for F variant?
Click to expand...
Click to collapse
Really if it could work, especially if you have been making updates from android v6, it is best to start the root from android v8.0 or 8.1, once achieved, try the installation, but if you already come from that version, you shouldn't have drawbacks. Try it, it's really worth it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device.
You have been warned.
DerpFest Shinju | OFFICIAL | Android 12.1
Build date: 07/06/22
Device: Redmi Note 11 (spes/spesn)
Download ROM 07/06/2022
Changelogs :
- Fixed overlay
- Fixed long boot
- Fixed mic
- Added refresh rate
- Lag fix
- Launcher fix
- Fixed some more bugs
- Fixed offline charging
- No bugs.
- More Changes
Flashing steps :
Download TWRP (first time needed)
• Formate data
• Reboot to recovery
• Flash rom (ignore red lines)
• Wipe data , cache & dalvik , metadata
• Open avdance menu install twrp in install ramdisk option
• Reboot to system
Bugs none for now, feel free to report if you find any in the comments below.
Kernel source Link
Support Group
Redmi note 11 Spes/Spesn Group
The process for 4/128 variant is the same as 4/64, right?
canIchangemyname said:
The process for 4/128 variant is the same as 4/64, right?
Click to expand...
Click to collapse
yes the same
NamCap said:
yes the same
Click to expand...
Click to collapse
That's good to know! Thanks.
Thank you so much for this Official Build. I'm using it as a daily driver.
Will May build come out?
xx_yolonoob_xx said:
Before flashing the rom, here's some bugs I've faced (will update as they come up, could be because of the kernel and not the rom itself):
Restoring from a backup on Google results in fingerprint not working for screen unlock. Restore at the setup on first startup or after continuing setup from the notification, same result. Fingerprint does work for payment apps.
Really jumpy adaptive brightness.
Cannot file transfer in USB, in ROM and recovery. USB controlled by setting stuck to "this device", won't switch. Only way to flash for me was to adb sideload. SD card or OTG might be easier.
Unable to flash twrp to ramdisk as of now, system/data partition is only available after format data in twrp.
And for the not bug but annoying during flashing, there's no recovery partition. Recovery is loaded into the boot partition. And there's two fricking slots. It's nice that we can have two recoveries, TWRP and crdroid, but annoying nonetheless.
Ported over from MIUI Global 13.0.9.0, I'd stay with MIUI and wait for the kernel to be released if I knew the drawbacks beforehand.
Click to expand...
Click to collapse
Same bugs as above, including:
Stock camera app broken
Personal pet peeve, derpfest recovery doesn't allow switching slots
Can't get SD card to work. I setup the SD card in SPES as portable storage, format, move it to another Android (RN3), copy a file from pc to RN3 through file transfer mode, shows up in files app, SD card back to SPES and asks for a format to use the SD card. (It sucks that there's no file transfer nor a way to send files from PC to SPES using an SD card. Don't have a type c OTG lying around)
Plus points:
Great idle battery management so far, attached a pic below. Haven't seen deep sleep after setting up all of my apps, hope disabling a few wakelocks will increase idle time further (faq about wakelocks in this, there's a guide linked in that post)
Unlimited photos storage, toggle to show device as pixel by default
Change ambient display notification style to that of AOD, it's really clean if you don't want notifications filling the lockscreen
Turn off volte icons
Refresh rate toggle in quick settings
xx_yolonoob_xx said:
Same bugs as above, including:
Stock camera app broken
Personal pet peeve, derpfest recovery doesn't allow switching slots
Can't get SD card to work. I setup the SD card in SPES as portable storage, format, move it to another Android (RN3), copy a file from pc to RN3 through file transfer mode, shows up in files app, SD card back to SPES and asks for a format to use the SD card. (It sucks that there's no file transfer nor a way to send files from PC to SPES using an SD card. Don't have a type c OTG lying around)
Plus points:
Great idle battery management so far, attached a pic below. Haven't seen deep sleep after setting up all of my apps, hope disabling a few wakelocks will increase idle time further (faq about wakelocks in this, there's a guide linked in that post)
Unlimited photos storage, toggle to show device as pixel by default
Change ambient display notification style to that of AOD, it's really clean if you don't want notifications filling the lockscreen
Turn off volte icons
Refresh rate toggle in quick settings
Click to expand...
Click to collapse
Can you attach Logs when you try to get your SD card to work? it works fine for me as a portable storage, i can as well transfer files from pc to the sdcard via cable while phone is plugged.
is fast charge work ?
Guan Yu said:
is fast charge work ?
Click to expand...
Click to collapse
Yep works.
NamCap said:
install ramdisk option
Click to expand...
Click to collapse
what is the difference between flash recovery and flash ramdisk option
Guan Yu said:
what is the difference between flash recovery and flash ramdisk option
Click to expand...
Click to collapse
The first option flashes the current recovery you are using to ramdisk, while the second option allows you to pick the recovery img you want to flash to ramdisk, it can be twrp, orangefox, or any other recovery img.
NamCap said:
The first option flashes the current recovery you are using to ramdisk, while the second option allows you to pick the recovery img you want to flash to ramdisk, it can be twrp, orangefox, or any other recovery img.
Click to expand...
Click to collapse
thanks
Can anyone tell if the firmware will go to spesn (with NFC) model?
habloid said:
Can anyone tell if the firmware will go to spesn (with NFC) model?
Click to expand...
Click to collapse
No problems with NFC, used a bunch today alone
Can anyone send me the official discussion telegram group for redmi note 11 spes|spesn?
Momin_brur said:
Can anyone send me the official discussion telegram group for redmi note 11 spes|spesn?
Click to expand...
Click to collapse
It's In the first post.
If you set the setting "wake the lock screen with notifications", then when a notification arrives and the screen lights up, the lock screen wallpaper is not displayed.
Rafiul Bari Chowdhury said:
Thank you so much for this Official Build. I'm using it as a daily driver.
Will May build come out?
Click to expand...
Click to collapse
Could you possibly give some screenshots of battery usage graphs, and further your overall experience using the rom
rom spesn and spes are the same, right?
Bruh i cannot unlock, it says to wait for 168hours
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include "std_disclaimer.h"
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What's working:
RIL (Calls, SMS, Data)
Fingerprint (FOD)
Wi-Fi
Bluetooth
Camera
Video Recording
Video Playback
Audio
Sensors
Flash
GPS
Vibration
Wifi Hotspot
Display out
Wireless display
Selinux enforcing
IMS (VoLTE/VoWifi)
What's not working:
Receiving SMS on chinese variants (or just carriers) may not work, more debugging required
Flashing Instructions:
Requirements:
Unlocked bootloader!
Learn these instructions by heart
PC with working adb/fastboot
Downloaded:
LineageOS zip
copy partitions zip
optional:
gapps
magisk
<insert other mod here>
Make a backup of EVERYTHING on your internal storage you dont wanna lose
reboot to bootloader
Code:
adb reboot bootloader
or reboot the device, and hold power and volume down
Flash the lineage recovery to both slots
Code:
fastboot flash recovery_a recovery.img
Code:
fastboot flash recovery_b recovery.img
reboot to recovery
use volume keys to select recovery reboot option and press power to confirm
in recovery use volume keys and power to navigate
stock vendor_boot does not contain touch drivers, so live with this for a bit
Select "Apply Update"
Select "Apply from ADB"
If you come from stock, this is REQUIRED:
Code:
adb sideload copy-partitions-20220613-signed.zip
Code:
adb sideload <lineageos zip>
Go back (Volume up can select the back button)
Advanced
Reboot recovery
You can use touch now
factory reset
-----Optional, Gapps/Magisk------
Select "Apply Update"
Select "Apply from ADB"
Code:
adb sideload <path/to/gapps.zip>
Code:
adb sideload <path/to/Magisk.zip>
Code:
adb sideload <path/to/some/other/mod.zip>
-----End Optional-----
Reboot system now
First boot, especially with Gapps, may take a while
Telegram group: https://t.me/MotoEdge30Ultra
Downloads:
copy partitions: https://mirrorbits.lineageos.org/tools/copy-partitions-20220613-signed.zip
LineageOS 20 (no gapps): https://drive.google.com/file/d/11hDmheZHVUey22upXOC-Yq1IqGC5-Fbq/view?usp=sharing
LineageOS 20 (with gapps): https://drive.google.com/file/d/11k64BFOhVbVl7OsUcpIAPXTRCl-FlViz/view?usp=sharing
Sources:
device tree/kernel: link
vendor: link
Changelogs:20221119:
Initial Release
20230523:
Up-to-date LineageOS sources
common vendor from bronco T1TBS33.32-8-9-7-2
eqs specific from S3SQS32.16-72-31-3 (mainly camera, firmwares)
Main kernel compiled from T1TBS33.32-8-9-7-2
Updated kernel device tree from T1TBS33.32-8-9-7-2
other changes I might have forgotten...
Reserved Post number 2
hola, alguien lo ha instalado?
我是酷安吸引过来看看的，不准备刷，小白鼠先上，我坐等PE系统。
Mod edit: English please!
Google translation:
I was attracted by Kuan to take a look. If I don’t plan to brush, the mouse will go first, and I will wait for the PE system.
Thank you for all your efforts!!! Hoping we could get more custom ROM to run later
Tiene gapps incluidos? I have already seen that it does not have what gapps do you recommend? thanks for the job
Awesome, thanks for your work! Should be possible to compile TWRP with your device tree and kernel now as well, right?!
Would you mind explaining why copy-partitions is needed and what it does?
Any experiences? Does Netflix work?
I have stock ROM, but magisk with unlocked bootloader... Putting it on the zgisk list, and using Safernet module updates via Playstore normally. But without hrd only in SD.
grove said:
Any experiences? Does Netflix work?
Click to expand...
Click to collapse
iron maiden said:
Tiene gapps incluidos? I have already seen that it does not have what gapps do you recommend? thanks for the job
Click to expand...
Click to collapse
I'm using Nikgapps currently
Killuminati91 said:
Awesome, thanks for your work! Should be possible to compile TWRP with your device tree and kernel now as well, right?!
Would you mind explaining why copy-partitions is needed and what it does?
Click to expand...
Click to collapse
Should work, i guess. And for TWRP no special kernel is needed. The recovery partition just contains a ramdisk (the recovery itself), with no kernel. During boot the bootloader merges the available ramdisks (depending on the boot mode ofcourse).
E.g. when you start the device normaly, it will merge the ramdisks from boot and vendor_boot (soc specific kernel modules)
When you start recovery it will merge the ramdisks from boot, vendor_boot and then recovery.
Copy partitions copies all slotted partitions (_a ad _b ones) from the current active slot to the inactive slot (e.g. when youre on slot a, it will copy all of them to their _b counterparts).
This is needed because motorola does not ship the second slot populated. So in case you have a fresh device (no OTAs and so, or you just flashed stock again), the second slot will be completely empty (no bootloader, no nothing). And A/B devices switch slots after every flash of a ROM, so the device would then try to boot into an empty slot, which fails and would kick you into qualcomms emergency download mode (9008).
If blankflash would help you in that state, im not sure.
grove said:
Any experiences? Does Netflix work?
Click to expand...
Click to collapse
Using it for like 2 weeks now as a daily driver. Netflix should work, but as L3 (idk if L1 would work, my device never was L1, so cant test that)
SGCMarkus said:
I'm using Nikgapps currently
Should work, i guess. And for TWRP no special kernel is needed. The recovery partition just contains a ramdisk (the recovery itself), with no kernel. During boot the bootloader merges the available ramdisks (depending on the boot mode ofcourse).
E.g. when you start the device normaly, it will merge the ramdisks from boot and vendor_boot (soc specific kernel modules)
When you start recovery it will merge the ramdisks from boot, vendor_boot and then recovery.
Copy partitions copies all slotted partitions (_a ad _b ones) from the current active slot to the inactive slot (e.g. when youre on slot a, it will copy all of them to their _b counterparts).
This is needed because motorola does not ship the second slot populated. So in case you have a fresh device (no OTAs and so, or you just flashed stock again), the second slot will be completely empty (no bootloader, no nothing). And A/B devices switch slots after every flash of a ROM, so the device would then try to boot into an empty slot, which fails and would kick you into qualcomms emergency download mode (9008).
If blankflash would help you in that state, im not sure.
Using it for like 2 weeks now as a daily driver. Netflix should work, but as L3 (idk if L1 would work, my device never was L1, so cant test that)
Click to expand...
Click to collapse
No SMS received after root
@SGCMarkus does 200Mpx mode works? manual, raw...
ailikes said:
No SMS received after root
Click to expand...
Click to collapse
You on the chinese variant and/or on a chinese carrier?
Currently thats a known issue... needs more investigating. But kinda difficult without more people who test it, as it works here on my (european) device in austria.
TF1920 said:
@SGCMarkus does 200Mpx mode works? manual, raw...
Click to expand...
Click to collapse
MotCamera4 is included, and all features should work.
Hi, I got the phone just now, I wonder what role does the "copy partition" play in the flashing process? Like some modem? or something else?
C_CWang said:
Hi, I got the phone just now, I wonder what role does the "copy partition" play in the flashing process? Like some modem? or something else?
Click to expand...
Click to collapse
Check post #11 here
also will write a FAQ later for that i guess
@SGCMarkus
What are your plans for this ROM ? Will you maintain it for a while ?
SGCMarkus said:
You on the chinese variant and/or on a chinese carrier?
Currently thats a known issue... needs more investigating. But kinda difficult without more people who test it, as it works here on my (european) device in austria.
MotCamera4 is included, and all features should work.
Click to expand...
Click to collapse
Can a telegram group be created
Can you create a telegram? I'm from China. I can help test it. I'm looking forward to it. Come on, developers
Thank you for you sharing your builds, I want flash your rom without using root and I have some questions:
1- did you plan to make offical lineage
2- play store certified or not
3- can we running the bank app without any security issue
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExtended ROM for Oneplus8T [kebab]
What is this?
PixelExtended ROM (or PEX for short), We are Combining Pixel Goodies with some essential features you were missing in Pixel Experience, delivering a ROM that promise you stabilty and being feature-rich at the same time . TBH this ROM will keep it's Pixel' idea intact and won't be bloat with unwanted features .
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 13 (T)
FeaturesEverything You've Always Wished For With Pixel Experience> OOS (Oxygen OS) Styled Traffic Indicators
> VoLTE Icon Customization
> Smart Charging
> Adaptive Media Playback
> Notification Counter/Logs
> G-Visual Mod
> FOD (Fingerprint On Display) Customizations
> Status Bar Customizations
> Volume Panel Customizations
> LS (Lock Screen) Clock
> Switch Styles
> Tinted QS (Quick Settings) Tiles
> App Lock with Face Unlock
> QS Customizations
> Gesture Customizations
> New Accents/Fonts/Primary Colors
Whats working?
All
First Time Install / Clean Flash
1. Be on the OOS13 (F13 or F15, F62)
2. Download copy_partitions, vbmeta, dtbo, recovery, and rom for your device from here
3. Reboot to bootloader
4.fastboot flash vbmeta vbmeta.img
fastboot flash dtbo dtbo.img
fastboot flash recovery recovery.img
fastboot reboot recovery
5. While in recovery, navigate to Apply update -> Apply from ADB
6. adb sideload copy_partitions.zip (press "yes" when signature verification fails) and then reboot to recovery
7. Repeat step 5 and adb sideload rom.zip (replace "rom" with actual filename)
8. Format data, reboot to recovery
Update
1. Reboot to bootloader
2. While in recovery, navigate to Apply update -> Apply from ADB
3. adb sideload rom.zip (replace "rom" with actual filename)
DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED
Download from Mega
Android OS version: 13.0_r43
Security patch level: May 2023
Build author/Device Maintainer: bojantanasic
Source code: https://github.com/PixelExtended
Prebuilt kernel:
GitHub - bojantanasic/android_kernel_oneplus_sm8250: Android 13 kernel for oneplus 8T
Android 13 kernel for oneplus 8T. Contribute to bojantanasic/android_kernel_oneplus_sm8250 development by creating an account on GitHub.
github.com
PixelExtended Developer: Aryan Gupta
Changes 23.05.2023.
-brightnes fix
-fix for theme and fonts
-switch to erofs (now system is fluid like butter)
-add App lock (Settings/Security/More security/App lock)
Kernel
- update kernel to v4.19.283
Includes OOS Cam?
kuto232 said:
Includes OOS Cam?
Click to expand...
Click to collapse
OOS cam not include in rom, you can use LMC8.4 for better result then OOS cam.
Hasli: LMC8.4_R13
Download LMC8.4_R13 by Hasli.
www.celsoazevedo.com
and use config for better result.
Thank you for the ROM.
I would like to ask if anybody knows - does dual SIM work on this ROM (specifically enabling and disabling certain SIMs on the fly)? I know Lineage has issues with that along with auto brightness (jumps from low brightness to too bright with no in between) on KB2005.
netusername said:
Thank you for the ROM.
I would like to ask if anybody knows - does dual SIM work on this ROM (specifically enabling and disabling certain SIMs on the fly)? I know Lineage has issues with that along with auto brightness (jumps from low brightness to too bright with no in between) on KB2005.
Click to expand...
Click to collapse
Brightness working just fine,as you can see in screenshot.I don't have second sim card to test, but I think that is fine too.
Can't download the vbmeta and copy partition files from the link you provided.
silverhazesupreme said:
Can't download the vbmeta and copy partition files from the link you provided.
Click to expand...
Click to collapse
Sourceforge delete files from server, very strange. I will upload on mega today.
For install temporary use this files
recovery:
https://mirrorbits.lineageos.org/recovery/kebab/20230119/lineage-20.0-20230119-recovery-kebab.img
vbmeta:
https://mirror.math.princeton.edu/pub/lineageos/full/kebab/20230119/vbmeta.img
copy_partitions:
https://mirrorbits.lineageos.org/tools/copy-partitions-20220613-signed.zip
Thanks LineageOs team for files
Sourceforge has problem with files today!
Good as a daily driver? No stuttering, just fluid?
Goat24K said:
Good as a daily driver? No stuttering, just fluid?
Click to expand...
Click to collapse
Here is small video how fluid is rom, no stuttering. Kernel is great in turns of battery and performance.
Kernel is Illusionx with small performance upgrade by me.Thanks Blaster4385 for kernel.
Video
Streamable Video
Watch this video on Streamable.
streamable.com
Does USB-C video out work? I haven't run a customer rom in a while and I specifically want to install one that has video out working. I can't recall if it was a pixel experience rom or not the last time I had it working.
bookofjoshua said:
Does USB-C video out work? I haven't run a customer rom in a while and I specifically want to install one that has video out working. I can't recall if it was a pixel experience rom or not the last time I had it working.
Click to expand...
Click to collapse
I don't have adapter to test, if you are on OOS13 and if it is working and if this is essential for you than is better to stay on OOS13. If I find cable I will test.
bojantanasic said:
I don't have adapter to test, if you are on OOS13 and if it is working and if this is essential for you than is better to stay on OOS13. If I find cable I will test.
Click to expand...
Click to collapse
Thanks for the reply. I am not, I have a KB2007 and there isn't a OOS13 available (yet, as far as I know). I can just load it and see I guess.
bookofjoshua said:
Thanks for the reply. I am not, I have a KB2007 and there isn't a OOS13 available (yet, as far as I know). I can just load it and see I guess.
Click to expand...
Click to collapse
This rom is for F13 or F15 firmware, if you are on Android 12 then this rom is not for you, because touch wil not work.
I was upgrading from clean OOS13 F15 and when sideloading the ROM, I've got:
Error applying update: 63 (ErrorCode::kPostInstallMountError)
ERROR: recovery: Error in /sideload/package.zip (status 1)
Full logs here: https://gist.github.com/ivirtex/3a1c8fc464050e0310c37c795346aaae
ivirtex said:
I was upgrading from clean OOS13 F15 and when sideloading the ROM, I've got:
Error applying update: 63 (ErrorCode::kPostInstallMountError)
ERROR: recovery: Error in /sideload/package.zip (status 1)
Full logs here: https://gist.github.com/ivirtex/3a1c8fc464050e0310c37c795346aaae
Click to expand...
Click to collapse
You need to update the recovery through the bootloader before you can flash the Rom.You on Los recovery now?
bojantanasic said:
You need to update the recovery through the bootloader before you can flash the Rom.You on Los recovery now?
Click to expand...
Click to collapse
Yes, I flashed provided lineage-20.0-20230119-recovery-kebab
ivirtex said:
Yes, I flashed provided lineage-20.0-20230119-recovery-kebab
Click to expand...
Click to collapse
Did you format data?
And did you copy partition?
You mast format data and after that copy partition.
And after that adb sidload rom.zip.
I just update mega directory with pixelextended recovery, try to install and then tray to install rom.
Sorry if install instructions not clear
Did you install dtbo.img, if not that is problem.
Here is install instruction
Flashing additional partitions
warning
Warning: This platform requires additional partitions to be flashed for recovery to work properly, the process to do so is described below.
Download the following files from the directory named with the latest date here.
dtbo.img
vbmeta.img
Power off the device, and boot it into bootloader mode:
With the device powered off, hold Volume Up + Volume Down + Power.
Flash the downloaded image files to your device by typing (replace <...> with the actual filenames!):
fastboot flash dtbo <dtbo>.img
fastboot flash vbmeta <vbmeta>.img
bojantanasic said:
Did you format data?
And did you copy partition?
You mast format data and after that copy partition.
And after that adb sidload rom.zip.
I just update mega directory with pixelextended recovery, try to install and then tray to install rom.
Sorry if install instructions not clear
Did you install dtbo.img, if not that is problem.
Here is install instruction
Flashing additional partitions
warning
Warning: This platform requires additional partitions to be flashed for recovery to work properly, the process to do so is described below.
Download the following files from the directory named with the latest date here.
dtbo.img
vbmeta.img
Power off the device, and boot it into bootloader mode:
With the device powered off, hold Volume Up + Volume Down + Power.
Flash the downloaded image files to your device by typing (replace <...> with the actual filenames!):
fastboot flash dtbo <dtbo>.img
fastboot flash vbmeta <vbmeta>.img
Click to expand...
Click to collapse
Thanks, flashing dtbo.img allowed me to install the ROM and everything seems to work fine, please update your instructions, so others won't have this problem.
New build are up
Happy flashing
Decent but the sound externally is awful. Very low and static-like. I usually have to turn it down, but i had to turn this ll the way up and i barely heard the song. *sigh* any suggestions? It's the same with the ring tones, they're VERY low.. what is going on here?