I've installed pixel experience on my phone. It started giving me many problems, and I decided to reset using the settings app. When I clicked the reset option it said restoring to factory settings and it rebooted to OrangeFox recovery and it said updating and rebooted again. When It completed restarting it didn't make any changes to my phone, Then 2 minutes later my phone went completely black. When I used my laptop and connected my phone, It was detected as Audio Driver. Please someone help with this issue. And it is being recognised as Moto G5(s) Plus A2DP SNK
Related
A day ago the battery got kinda low and I put it on charge. It started rebooting on its own while charging, I put it down to being low on battery and went along with my day. A few hours later I took it off charge and i was still rebooting itself after around 30 seconds being in the OS.
I thought it may be the ROM and did a wipe, after a wipe everything worked for 12 hours, it was even used outside and got real warm with no problems. Then I started uninstalling the apps that my old HTC Backup put back on and it did the same thing.
I did another wipe and just installed swiftkey (was NOT installed before) and then it started doing the exact same thing. I decided to try a different ROM in-case that would solve the problem, once I flashed a new ROM i restarted and it just took me into the bootloader and no further.
Recovery doesn't work, it just reboots. I tried plugging it in but all I get is it working for 10 seconds and then "USB Device not recognized". During the 10 seconds I still cant send ADB/Fastboot commands to it. I tried different PC's with and without USB 3.0 and 3 different cables. Before this ADB worked fine
All the drivers are correct, and I tried using HTC Sync drivers. (Even with the drivers uninstalled I get the error about it not being recognized)
Does anyone have any ideas? Or should I just sell it and move on?
Here is the screen with all the info on - https://dl.dropboxusercontent.com/u/6017469/P1010831.JPG
SeanBond said:
A day ago the battery got kinda low and I put it on charge. It started rebooting on its own while charging, I put it down to being low on battery and went along with my day. A few hours later I took it off charge and i was still rebooting itself after around 30 seconds being in the OS.
I thought it may be the ROM and did a wipe, after a wipe everything worked for 12 hours, it was even used outside and got real warm with no problems. Then I started uninstalling the apps that my old HTC Backup put back on and it did the same thing.
I did another wipe and just installed swiftkey (was NOT installed before) and then it started doing the exact same thing. I decided to try a different ROM in-case that would solve the problem, once I flashed a new ROM i restarted and it just took me into the bootloader and no further.
Recovery doesn't work, it just reboots. I tried plugging it in but all I get is it working for 10 seconds and then "USB Device not recognized". During the 10 seconds I still cant send ADB/Fastboot commands to it. I tried different PC's with and without USB 3.0 and 3 different cables. Before this ADB worked fine
All the drivers are correct, and I tried using HTC Sync drivers. (Even with the drivers uninstalled I get the error about it not being recognized)
Does anyone have any ideas? Or should I just sell it and move on?
Here is the screen with all the info on - https://dl.dropboxusercontent.com/u/6017469/P1010831.JPG
Click to expand...
Click to collapse
Damn, sorry. Pretty sure you're out of luck if you can't connect to PC and you can't get into recovery. I'd give it straight into support now and give an excuse like update failed, randomly started restarting etc.
What OS Are you running? 8.1? I would suggest using a Linux Live Disc or Windows 7. its much more reliable.
I am pretty sure you need hboot 1.56+ for windows 8 to work correctly in Fastboot
SeanBond said:
A day ago the battery got kinda low and I put it on charge. It started rebooting on its own while charging, I put it down to being low on battery and went along with my day. A few hours later I took it off charge and i was still rebooting itself after around 30 seconds being in the OS.
I thought it may be the ROM and did a wipe, after a wipe everything worked for 12 hours, it was even used outside and got real warm with no problems. Then I started uninstalling the apps that my old HTC Backup put back on and it did the same thing.
I did another wipe and just installed swiftkey (was NOT installed before) and then it started doing the exact same thing. I decided to try a different ROM in-case that would solve the problem, once I flashed a new ROM i restarted and it just took me into the bootloader and no further.
Recovery doesn't work, it just reboots. I tried plugging it in but all I get is it working for 10 seconds and then "USB Device not recognized". During the 10 seconds I still cant send ADB/Fastboot commands to it. I tried different PC's with and without USB 3.0 and 3 different cables. Before this ADB worked fine
All the drivers are correct, and I tried using HTC Sync drivers. (Even with the drivers uninstalled I get the error about it not being recognized)
Does anyone have any ideas? Or should I just sell it and move on?
Here is the screen with all the info on - https://dl.dropboxusercontent.com/u/6017469/P1010831.JPG
Click to expand...
Click to collapse
usually when it boots into the os, then reboots after 30sec or so, the radio is borked. the radio is the last thing to load in the os
if you can get into the bootloader as it shows in your pic, you need to select FASTBOOT. what you see in the pic is youre in HBOOT mode, and that will not connect to a pc that way. ADB will not work in the bootloader in any case, so dont even try that. You should have your recovery.img file ready, get into the bootloader as you show, and select FASTBOOT. then flash your recovery with command-- fastboot flash recovery recovery.img
however, if your radio is hosed, flashing a rom wont help you. You should probably do a RUU. Many RUU's work off fastboot mode, so get into that and start the RUU.exe
Hi guys, first of all this is my first post here and won't be my last.
I am an Apple/iPhone long time user and want to tryout Android, just because I think it's time for a change , without knowing if I could get used to the new OS and wanting to spend as less as possible on this "endeavor" I bought a second hand Galaxy Note 2 GT-N7100 from a friend, the phone worked perfectly when I bought it, it had Android 4.1.2 on it and I wanted to update it to 4.4.2, did some research on the net about this (learned about the locked bootloader - this wasn't an issue for me coming from the iPhone) and updated the phone using Kies - and this is were the fun begins.
The update failed, and the phone was softbricked but could still go into download and recovery mode, after reading a few hours on the internet, I used Odin to flash a 4.3 stock rom for the n7100 which I downloaded from samsung-updates, the software got installed on the phone but it was very laggy (with the phone opened but locked, when I pressed the power button it took about 7-8 seconds for the display to light-up, the animations were very sluggish and phone was unusable).
I installed another ROM, using Odin, this time a 4.4.2, with the same results (every time I reset to factory setting and wipe cache from recovery - this didn't help).
I then installed clockwork recovery and rooted the phone then installed cyanogenmod 10.1 which worked almost ok but if i locked the phone after a few seconds the phone would restart, wipe cache/restore factory settings didn't help, i installed it again hoping it would be just an issue with the installation but had the same result, phone would restart.
I've followed all tutorials I could find related to this phone and this issue, installed several patches, reinstalled several stock roms, installed Criskelo rom, all with the same result, the phone is very very very slow and freezez after a while or it restarts after i lock the phone.
So, let me just give u some history on the phone, enumerate the symptoms and where I am right now:
History:
The phone was bought from Vodafone Romania, was never rooted and was never updated (before me ) and still has 3 months warranty.
Symptoms:
- Phone is very slow, unusable
- Freezes after the display is locked
- it is not recognized in windows, when I connect it i can hear the windows connect chime but the phone storage is not mounted, in device manager the phone is recognised as "cdc communication interface" which is not installed - i have the samsung drivers installed, and i have tried on other PC's with the same result, I also tried with several data cables - same thing - the phone works ok when in recovery/download mode
- sometimes when the phone is connected to the PC and the screen goes dark a gray battery appears with a "wait circle" and the phone freezes
- in recovery the phone displays 14 bynaries downloaded and also knox warranty void 1
- most of the roms freez in the language selection screen - i boot-up the phone (after i do a restore factory settings) the installing application dialog appears and then the language selection screen appears, then after 5-6 seconds the phone freezes - the freeze is not triggered by something I do it's triggered by time, after 5-6 seconds no matter what I do with the phone the phone freezes, if it makes any difference, exactly before the phone freezes the display brightness goes to the maximum setting.
Where I am right now
- I installed another stock rom, 4.4.2, it worked acceptable for a few minutes (it got passed the initial setup with no issues) then i left it on the desk, the display went dark and the battery thing happened again and the phone froze, i restarted the phone in recovery, did a factory reset, when the phone started it froze on the language selection screen.
I am at this for about a week now and I have no more ideas and no more patience, and run out of threads and tutorials to read, I am 1 step away of using the phone as a paperweight so please help, any idea would be appreciated, even if it's to enlighten me about what happened and telling me that the phone is bricked.
I am willing to try anything even if it is risky and can totally brick the phone, this is not my main phone and it's purpose is to help me understand android, and help me not make the same mistakes next time.
But, if it's possible I would like to fix the phone because even though it's pretty old it's still an ok phone.
Sorry wrong forum. You need N7100, not the n7000. Good luck.
Long story short my sister upgraded to iphone so she left her xperia SP untouched for two days, which somehow drained all the battery ( i know it because LED blinked three times when I pressed power button). So I left it to charge for 3 hours using a wall charger & then following happened:
1. Sony logo came up.
2. Sony Auto repair mode activated. (Phone was perfectly working earlier).
3. Then the Sony rainbow wave kept on coming for hours.
4. A message popped up ‘Process system is not responding’ with option ‘wait’ & ‘continue’. I chose continue.
5. Phone was stuck on that screen for half an hour. Then I decided to switch off the pone normally. Power off popup screen came and screen froze on it for hours.
6. Then the process restarted and it has been the same way no matter what i try.
Solutions that I’ve already tried:
1. Repairing using Sony PC companion. Progress stay stuck at same point on all three of my PCs and then errors shows up. ( tried on windows 8.2/xp sp3/Windows 7 64bit).
2. Repairing using Flashtool. Everything gets loaded successfully but no progress has ever taken place. Even left it for a day but my phone’s battery died yet not flashed. Tried it on windows 7 and XP-SP3, with three different ‘*.ftf’. windows 8.1 is still pending.
3. I installed EMMA. It detects my device pretty well but as it is not rooted nothing further happens.
Installed all drivers prescribed in flashtool successfully. Reinstalled them after reinstalling flashtool and PC companion.
Tried rooting only kernel but didn’t work. It stayed stuck as well.
4. Updated java.
5. Took phone apart and pulled the battery ribbon out and repeated step 1-4. Still no success.
Any type of suggestions/help is really appreciated.
rohitchandra said:
Long story short my sister upgraded to iphone so she left her xperia SP untouched for two days, which somehow drained all the battery ( i know it because LED blinked three times when I pressed power button). So I left it to charge for 3 hours using a wall charger & then following happened:
1. Sony logo came up.
2. Sony Auto repair mode activated. (Phone was perfectly working earlier).
3. Then the Sony rainbow wave kept on coming for hours.
4. A message popped up ‘Process system is not responding’ with option ‘wait’ & ‘continue’. I chose continue.
5. Phone was stuck on that screen for half an hour. Then I decided to switch off the pone normally. Power off popup screen came and screen froze on it for hours.
6. Then the process restarted and it has been the same way no matter what i try.
Solutions that I’ve already tried:
1. Repairing using Sony PC companion. Progress stay stuck at same point on all three of my PCs and then errors shows up. ( tried on windows 8.2/xp sp3/Windows 7 64bit).
2. Repairing using Flashtool. Everything gets loaded successfully but no progress has ever taken place. Even left it for a day but my phone’s battery died yet not flashed. Tried it on windows 7 and XP-SP3, with three different ‘*.ftf’. windows 8.1 is still pending.
3. I installed EMMA. It detects my device pretty well but as it is not rooted nothing further happens.
Installed all drivers prescribed in flashtool successfully. Reinstalled them after reinstalling flashtool and PC companion.
Tried rooting only kernel but didn’t work. It stayed stuck as well.
4. Updated java.
5. Took phone apart and pulled the battery ribbon out and repeated step 1-4. Still no success.
Any type of suggestions/help is really appreciated.
Click to expand...
Click to collapse
Okay, i am thinking you have troubles with drivers. Open up flashtool folder and go into USB drivers . Install it and see if your device detects it. Do not install drivers from by running flashtool.
By the way are you using the latest flashtool with latest drivers provided in its folder ?
I suggest you install a custom recovery (which you can get from a kernel even from flashtool by going into fastboot mode) and try to clear cache/ complete wipes. See if that helps. Make sure the recovery is specific to your android version. Do not flash a kernel which is based on 4.2 but you have 4.3 flashed etc.
Quote me back if you expect a reply.
Good Luck
For a while I've been using the nonsense rom (provided on this forum) and it's worked fine. Just the other day however I tried turning on my phone, it would get to the boot screen with the animation of the android bot peeing on the apple logo and it would just play that animation over and over until eventually the phone turns off. I figured I just had to restart, but it was the same issue. After trying to reinstall that same rom, I had the same problem. I then tried different roms and the same issue with those, they would get to their respective boot animations and play them until the phone turns off, never going past the boot screen. The one rom that sort of worked with the cayonogenmod 12.1 rom, but the issue with that is after the boot animation, it appears to be starting the set up for the phone, but prompts me to enter a password, which I have no idea what it is. Doing a bit more research, it seems that there may be a problem with twrp and it not formatting (term?) properly.
As of right now, I've done a factory reset on the phone several times to no avail. I just need help getting this phone to work. I've tried looking at a few places and using adb, but the device wasn't found and I didn't have time to look any further because I'm busy with a project I'm working on and with moving. Some places I've looked said to put the phone into usb debug mode, which I can't do since i can't get past any of the boot screens.
Edit / Solved:
I went into twrp and instead of choosing "wipe data" i went to "format data" and that seemed to fix the problem. Although I did have an issue with the nonsense rom, it got past the boot animation, but then gave an error "unfortunately the process com.android.systemui has stopped". I instead installed the raptor rom and it's working fine.
Hello!
I decided to play with my old phone and turn into something new but I'm start to afraid I turned into a brick
First of all I've installed TWRP and Magisk successfully, the bootloader being unlocked, the phone fully rooted, I was on the right path. But then for some reason, I had to recover the factory rest. And then when my problems started. After that I just ended up in TWRP boot, loop, and my system never came back. I tried many different things to recover, but nothing worked, as far I studied these forums many people recommended to flash the factory ROM back. I've downloaded this, and copied the boot, system, and recovery img to the phone and flashed via TWRP. That was a very big mistake, because since that my phone in constant boot loop but now I don't even have access to it.
The boot loop look this way. turning on Moto logo, at bottom of the page writing me its unlocked, okay trying to load, after 20 sec or so turning of for 4-5 sec and trying again. If I'm connecting the device to my PC I can see MediTek Preloader USB Vcom for few seconds on my pc then dissapearing. I've installed new drivers because I thought these VCOM drivers will help for SP flash tool to work, but I was wrong.
Actually the flash tool not worked before too, cause not started the program bar, the phone not really reacting if I'm pressing 3 button down. Interestingly enough if I'm removing the VCOM drivers, and keep the Motorola driver on my pc, then I think the 3 button turning off working and even SP tools started to progress but timed out and not finished the procedure. But this 3 button method not working consistently, in the TWRP boot loop before it not worked at all, now since I ruined the TWRP by installed the factory recovery.img (which seems like was bad also, cause I can't boot into recovery mode anymore) seems like I can do something with the SP flash tool. It's just timing out.
Maybe other tools which can communicate with the phone in this preboot state? Adb and fastboot only can be accessed later, and there is no way for me to reach that state now.
What can I do to unbrick and go back to factory state so I can setup TWRP, root etc once more again, and I'll be more catious not to factory reset anymore.