Hi,
I just would like to know if it's possible (or if it's a stupid question) to put a rom of a Qtek 9090 on a Qtek 2020.
Why this question ? Because the Qtek 9090 have the same processor and (I suppose ) mainly the same hardware than the Qtek 2020.
Benefits of the manipulation : WM2003 SE, BT Widcomm stack, ...............
Did someone have this rom ?
If no, I have one
and you're still waiting to publish it !!
As far as I've seen QTEK9090 has a PXA27x CPU and 2020 is PXA263. Theoretcally it is possible to patch 9090 ROM so that it would not hang on our devices.
To freddyzaz
To freddyzaz
Tofreddyzaz
freddyzaz, if you really have this ROM from Qtek 9090 - please post it, so we can see what can be done with it.
Can you upload the ROM of qtek 9090??
@ freddyzaz
Please, can you upload the ROM of Qtek 9090 in this forum?
I would like to try it anyway with my MDA II
Thanks,
Hi,
I've posted the Qtek 9090 rom. Enjoy it, and please post your results here
Re: Can you upload the ROM of qtek 9090??
van said:
@ freddyzaz
Please, can you upload the ROM of Qtek 9090 in this forum?
I would like to try it anyway with my MDA II
Thanks,
Click to expand...
Click to collapse
Hi Van,
I will try it for you and will add comment to XDA-Forum,
For O2 XDA-II -> everything is possible .... like mission imposible ... and make it avaible.
Mentioned ideas the same with mine, ... we will use O2 XDA-II or XDA-II(i) or XDA-II(s) or XDA-III ??? where the core hardware inside is not much impressive.
Chim sao / VHS
mamaich said:
As far as I've seen QTEK9090 has a PXA27x CPU and 2020 is PXA263. Theoretcally it is possible to patch 9090 ROM so that it would not hang on our devices.
Click to expand...
Click to collapse
Wrong my Qtek 9090 has a PXA263 400Mhz...
from the registry I noticed a difference in the bluetooth device:
qtek2020:
Code:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\ASIC5_BTUR]
"DeviceArrayIndex"=dword:00000000
"DeviceType"=dword:00000000
"Dll"="ASIC5_BTUR.Dll"
"FriendlyName"="BT on COM6:"
"Index"=dword:00000006
"IoBase"=dword:afe00700
"IoLen"=dword:00000024
"Irq"=dword:00000022
"Order"=dword:00000002
"Prefix"="COM"
"Tsp"="Unimodem.dll"
qtek9090:
Code:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\BlueTooth]
"DevConfig"=hex:20,00,00,00,05,00,00,00,10,01,00,00,00,4b,00,00,00,00,08,00,\
00,00,00,00,00
"DeviceArrayIndex"=dword:00000000
"DeviceType"=dword:00000000
"Dll"="Serial_BTUR.dll"
"FriendlyName"="BT UART"
"Index"=dword:00000004
"IoBase"=dword:aa050000
"IoLen"=dword:00000024
"Irq"=dword:00000011
"Order"=dword:00000002
"Prefix"="COM"
"Tsp"="Unimodem.dll"
different iobase, different drivers.
I don't have a qtek9090, so can only look at the binary for differences.
It's normal because the 2020 has a MS drivers/stack whereas the qtek 2020 has a WidComm drivers/stack but the drivers file has the same name.
In the Qtek 9090 :
"Bluetooth for Windows CE BT-PPC/PE Version 1.0.0.1900"
I need the password for this ROM... :roll:
Try to flash ROM- Qtek 9090 for MDA II
I have been trying flash ROM- Qtek 9090 for MDA II but no success :evil:
1. Copy NK.NB1 to the SD card
2. Enter bootloader mode
3. Hook up a terminal on the serial line
4. Insert SD card
5. Type 'S2d'
Nothing
Any Ideas ???
I dont think just flashing the qtek 9090 rom will do the trick.
there's just to much difference between the devices.
but I'm looking forward to you guys getting this done. there are so many freaks around here
off topic
@JRC
Where did you get the Qtek 9090? And how much did you pay for it.
I would like to buy one, but here in Belgium or the Netherlands, they still not available
freddyzaz: Could you please download all 3 ROMs (OS ROM, Extended ROM and Radio ROM) and post it here?
itsme: Could you please create the .nbf files when freddyzaz will post the ROMs here?
Sorry, I can't. The 9090 was just for a test, and I've not the possibility to have it again.
Aarrrgghhh... That's bad, that's bad...
I think we need all these tree ROMs backups, 'cause I'm "sure" RadioROM is little bit changed (updated?)... And ExtROM we need for great new versions of included SW, of course...
But I hope, if we get these ROMs someday and try to flash them, it should work in Himalaya as Himalaya & Blue Angel are different only in keyboard and WiFi, the rest should be same (CPU, RAM etc...)
As far as I see 9090 uses a different BT chip: BRF6100, that is probably incompatible with ours. Display hardware is also different - when I've replaced ace_ddi.dll with this - my iMate hanged on startup. Camera is also incompatible - the 9090 application crashes at start.
i think it's not the right way by trying to get the whole thing working with the qtec 9090 images but to extract the wm2003 system.
so we get a completly "naked" system in which we can load our old software and drivers from the qtec 2020.
I guess that's the way to get started on this.
ROM Qtek 9090
Flashing error again
I think that we need WM 2003 SE and smart bluetooth profile supported PAN. Some months ago nick HTC already had test ROM with WM 2003 SE and it is working. Now Tmobile and mmO2 have tested ROM and we have to wait for launch MDA III fist in Nov. :wink: then the upgrade 2003 SE will be posted?
May be somebody can share the beta upgraded ROM WM 2003 SE here???
Thanks
Hi everyone
im looking for T-Mobil ROM for i-mate PDA2K ...
where can i find it
can u show me the way to get it ...
thanx[/b]
Hi! In fact, I was thinking about the contrary, but I was wondering if this is possible to do. My aim is to unlock the T-mobile SIM, and the PDA2K ROM is SIM-unlocked. The MDA III device and the Imate-PDA2K device are the same. Today a new ROM has appeared for the imate PDA2K, but only imate members can download it. Tell me if I am right or wrong about all this. Thanks.
Imate PDA2K new Rom Update
Do not uodate to new rom. It screws the Hands Free Profile.
Howdy!
I just wondering if anyone has the passwords for the "BA_WWE_BP_12200_169_10602_SHIP.zip".
I dont get why it should be so hard to upgrade it? It is a dangaard QTek 9090, but i used the brightpoint qtek 9090 upgrades before.
Please help =)
Cheers,
Lars
Hmmm
Or if anyone could give me an url on dangaard where i can find the latest software?
Cheers,
Lars
As I understand it,this only works on units where you are upgrading from the Qtek 1.22.126 Rom. I am using the 1.22.167 rom and it works great compared to what it was!! Better b/t, and better WiFi range. 8) 8)
lalle said:
Howdy!
I just wondering if anyone has the passwords for the "BA_WWE_BP_12200_169_10602_SHIP.zip".
I dont get why it should be so hard to upgrade it? It is a dangaard QTek 9090, but i used the brightpoint qtek 9090 upgrades before.
Please help =)
Cheers,
Lars
Click to expand...
Click to collapse
Is it so.
You mean that I can upgrade without any errors.
Cause I read here in forum that still there is no way to upgrade non native Qtek.
Dear brother,
I want to flash my Dopod 838 from CHT to WWE (Eng). Can you tell me which provider ROM (RUU) is latest and fully support the 838 hardware such as Keyboard, WiFi and BT...? Thank you.
PDAMAN
The Qtek RUU (2.17) is what I use on my Cingular 8125 (same as Dopod 838) so I imagine you should be good to go.
hellomoto_25 said:
The Qtek RUU (2.17) is what I use on my Cingular 8125 (same as Dopod 838) so I imagine you should be good to go.
Click to expand...
Click to collapse
is all hardware support no problem? wifi/BT and keyboard layout ? thank you.
yes, it works perfectly, but you may need change the keyboard code
wensongxia said:
yes, it works perfectly, but you may need change the keyboard code
Click to expand...
Click to collapse
Why change keyboard code? It's not for same keyboard layout support? Is KJam better support 838 than Qtek? thanks
I was in Shanghai last week and picked up a Qtek 9100 that had a CHS rom on it. I didn't need a CHS device anymore so I flashed the QTEK with the latest Wizard/Cingular WWE ROM and it works fine. You should be able to go to the ftp site and download the latest QTEK 9100 WWE ROM that is posted and you should be good to go.
Send me a PM, I can lead you step by step...
OK, I'm a noob.
I see in the ROM lists, there are both Qtek and i-mate versions of the new ROMs.
What's the difference?
Thanks.
JQP