Related
I was in a telstra shop today and asked about the WM6 ROM for telstra. The salesman metioned that there had been a few bugs but 2-3 weeks was the current expection.
That's good to hear. At the moment i have a Dopod c730 and Telstra Tre 750 (with the new WM6 voda rom) on it and neither of them can get 3G/HSDPA...only Edge connections. After 3 calls to Telstra they said 1) Dopods aren't supported because we dont sell them and 2) Windows Mobile 6 updates arent supported at all...
I just wish Optus' 3G rollout would speed up!!!!!!!!!!
ha how funny, i have it no problems at all...do you have a next g sim card?!?!?
@aussienick
I too have a Treo750 Telstra but now after the WM6 upgrade is now branded Vodafone.. I can get both 3G and H (which I am assumiing stands for HSDPA) and it automatically switches to H when I am using the internet/data and goes back to 3G.. I use a Voda SIM on this phone..
This sucks
Well this sucks..My Treo with WM5 was working great with the #G speed from telstra, then when updating to AT&T rom it went to edge and now with the Voda rom from Palm UK it only allows me Edge too...
I've had the same problem actually. I started with 3G working find, then went to WM6 ATT rom, then to UK vodafone. Still no 3G just edge.....this doesn't look good. Perhaps we need to go back to the original telstra rom??? Anyone got it?
i've never had a problem. my original rom was the vodafone because i purchased my Treo 750v from overseas. worked great on Three's 3G network although i had to find the modem settings through whirlpool.net
i've upgraded to the ATT WM6 Rom and it was even better... now with HSDPA! everything was pre configured so i didn't have to do anything even!
and after Vanilla-ing the Rom nothing's changed. i get HSDPA when possible. i only get Edge when i'm deep inside a building but i have forced my phone to lock onto an UTMS band only
Could this be the reason,
The AT&T Rom only allows
GSM(900 + 1800 + UMTS 2100
or
GSM(1900 + 850) + UMTS (1900 + 850)
Telstra are using:
GSM 900 / 1800
UMTS 850 (NextG) / 2100 (shared with Three)
amberzombie said:
but i have forced my phone to lock onto an UTMS band only
Click to expand...
Click to collapse
Hi, can you tell me how to do this on my treo? maybe that will help me..
aussienick said:
Hi, can you tell me how to do this on my treo? maybe that will help me..
Click to expand...
Click to collapse
yeah just go to Menu on the bottom right then Preferences - Phone Settings
tap on the Services tab and go to Band Selection
Under Select Network Type change it to UMTS
then click ok you're done
FSB said:
Could this be the reason,
The AT&T Rom only allows
GSM(900 + 1800 + UMTS 2100
or
GSM(1900 + 850) + UMTS (1900 + 850)
Telstra are using:
GSM 900 / 1800
UMTS 850 (NextG) / 2100 (shared with Three)
Click to expand...
Click to collapse
If that's the case, then what options are shown in the Telstra ROM or the Vodafone ROM for band selection?
I don't remember, maybe someone here has an old WM5 build, and can tell us.
I remember having 4 options on WM5 and now only have 2 with WM6.
Currently on WM6 I only have:
GSM (900+1800) + UMTS 2100
GSM (1900+850) + UMTS (1900+850)
On the old WM5 I have both above plus 2 more, 1 i think only had GSM and the other I think was GSM + UMTS (2100, 1900, 850)..
Sorry could not properly remember..
amberzombie said:
yeah just go to Menu on the bottom right then Preferences - Phone Settings
tap on the Services tab and go to Band Selection
Under Select Network Type change it to UMTS
then click ok you're done
Click to expand...
Click to collapse
Thanks mate, it works a treat! I also set this up on my Dopod c730 (i had to choose WCDMA) and it works great!
Thanks again!
aussienick said:
Well this sucks..My Treo with WM5 was working great with the #G speed from telstra, then when updating to AT&T rom it went to edge and now with the Voda rom from Palm UK it only allows me Edge too...
Click to expand...
Click to collapse
Make sure you have a 3G or nextg sim, I just called into a telstra seller, and they gave me a new sim (no charge) for nextg.
Telstra have now replaced it, and it work fast. 3G normal and U for internet. 550
I thought it work OK with WM5, but maybe I was wrong??
Now internet/email is real fast, on WM6
I have an Treo 750-1.16-RWE, upgraded with 3 rom vanilla.
Treo 750 WM6 For Aussie World
Hey any of you fellow Aussie Landers used a WM6 upgrade then used PoP3 via telstra data plan on telstra 3g sim
Not keep to screw up my wife's new 750.
Spoke to Palm and they were not as sure at this 3-4 weeks window?
Spoke to head of Mobile Telstra and he confirmed problems may delay til <gulp> next year.
Either way loss of Telstra branding crap on my phone isn't an issue if it still allows her pop3..
FYI PoP3 is not Big Poo or Telstra .
Thanks in advance folks
come on telstra!!!
Telstra ROM anyone?
Does anyone have a Telstra ROM for the Treo 750, WM5 or maybe WM6 ?
What would be the best ROM to use for Telstra connectivity?
MultifyG said:
Does anyone have a Telstra ROM for the Treo 750, WM5 or maybe WM6 ?
What would be the best ROM to use for Telstra connectivity?
Click to expand...
Click to collapse
Available form the palm.com.au website.
Hi all,
Did anyone get 3G (HSDPA / UMTS should be both supported on these networks!) to work on the Telfort / KPN (Dutch) network?
It seems with the default network settings it does not pick up 3G, only GPRS / EDGE?
Regards,
Nika.
I've got no problem using both 3g and HSDPA. The connection is called GPRS though, maybe that's the confusing part. When using them, there are symbols 3G and H in the top of the screen. Good luck
I am sure you know this, but nevertheless: if you do not take out a data subscription, KPN/Telfort have disabled UMTS; you will then ONLY get gprs.
nikagl said:
Hi all,
Did anyone get 3G (HSDPA / UMTS should be both supported on these networks!) to work on the Telfort / KPN (Dutch) network?
It seems with the default network settings it does not pick up 3G, only GPRS / EDGE?
Regards,
Nika.
Click to expand...
Click to collapse
You also need to request a new UMTS enabled simcard.
check you rom version, if it does not depend on your provider
So far 3G for works for me only with Radio rom at least 1.27.12.17 and OS >= 1.56.406.5.
Have run Radio rom 1.27.12.11 for a long time and no 3G connection @ all regardless of data or voice.
With radio 1.27.12.17 some calls on 3G were possible, but still more outages then connections.
Now I tried the french OS (1.56.406.5) together with radio 1.27.12.11 and for 4 hours 3G is stable. This is not very mature, but it is a tendency that it is not the radio rom only that trobles the 3G connections.
@all: Thanks for the tips, yes, UMTS/HSDPA needed to be enabled (remotely) on the SIM (even though I had enabled Max Online on my subscription).
@dauphinas365: Does this unstable 3G connection mean that you are unreachable when 3G is connected (which is the case on my Kaiser)?
How can I check what kind of connection (GPRS / UMTS) has been setup?
Mobile: Tytn II (Kaiser)
Provider: Telfort + Surf&Mail
3G connect with KPN on my phone.
And gsm connect wiht Telfort on my phone.
So i have:
3G KPN NL TELFORT NL. :S
xmoo said:
3G connect with KPN on my phone.
And gsm connect wiht Telfort on my phone.
So i have:
3G KPN NL TELFORT NL. :S
Click to expand...
Click to collapse
Yeah, same here. But officially you should be able to be called during 3G, but in my case the caller gets a busy tone...
Can someone reach you when you're on 3G?
nikagl said:
Yeah, same here. But officially you should be able to be called during 3G, but in my case the caller gets a busy tone...
Can someone reach you when you're on 3G?
Click to expand...
Click to collapse
Havn't tried it yet.
Hi.
I have a HTC Diamond with the last ROMs (Panosha and SwiftBL 6.0 full) an 0.5 radio. I bought a 3G Chip to Entel, Movistar and Claro, but my experience with all of them was unhappy.
Entel and Claro only show EDGE in connections. Movistar shows the tuple EDGE, 3G.
All of them show an E in top bar. Never show 3G o H. I tried all options in Telephone --> band. The results are the same.
My question is :
The HTC Diamond recognize the 3g band in Chile? How I can configure it?
Thanks in advance.
Same but Panosha 1.7 and .08 radio.
Entel. No 3G only EDGE. Edge is enough for email, googlemaps, rss and casual surfing. But I wouldent mind having 3G (obviously).
So you say Movistar 3G works on Diamond?
Thanks bye.
COLOMBIA!!!!
HEY i am from colombia and i am planning to buy the same gadget (HTC DIAMOND), but i think i won´t be able to download data trough 3g because here MOVISTAR use 850 band, and the htc diamond don´t, so i want to know the same, if there is some ROM or RADIO or UPDATE or something that would let me transfer data in 3G (850) band.
Hi Sergio.
I don't know if Movistar works in 3G. In my Diamond the connection icon in the top bar shows EDGE,3G when i tap over it. but the icon is an E ¿?
We have and Iphone 3G and Nokias 3G and the same chip shows 3G ¿? Not all the time, only short times.
Is the diamond a real 3G device in Chile??????
Sergio PC said:
Same but Panosha 1.7 and .08 radio.
Entel. No 3G only EDGE. Edge is enough for email, googlemaps, rss and casual surfing. But I wouldent mind having 3G (obviously).
So you say Movistar 3G works on Diamond?
Thanks bye.
Click to expand...
Click to collapse
Please continue posting on this LINK It kindo has been discussed.
Search before new posts or else Moderator will kick your assss!
Respected Admin:
Can we merge with existing one?
Thanks
All the last cookied ROMs includes the 850 Band. I don't know the colombian reality.
Mrok said:
HEY i am from colombia and i am planning to buy the same gadget (HTC DIAMOND), but i think i won´t be able to download data trough 3g because here MOVISTAR use 850 band, and the htc diamond don´t, so i want to know the same, if there is some ROM or RADIO or UPDATE or something that would let me transfer data in 3G (850) band.
Click to expand...
Click to collapse
850mhz GSM bands yes.. but not 3G 850mhz bands..
I bought my HTC Diamond on UK. I updated the ROM to the RUU_Diamond_HTC_HK_WWE_1.93.831.1 this was supposed to make my phone QuadBand. It does work in USA (Boston) where I live. But I have never seen my phone doing 3G and speed test top was around the 1xx kbps.
Any Ideas?
PS. I am on the ATT network
Are you sure you have 3G coverage in Boston? Do you have a USIM-card (which I was told to be required for UMTS stuff)?
3G speed
I did look at the ATT coverage map and it said that I do have coverage.
How do I know what type of SIM I have? The SIM does have the 3G logo on it.
Are you sure your phone has the bands?
Check the Band setting, Settings->Phone->Band,
in the dropdown box for "Select your GSM/UMTS band", my US 3G ATT phone shows the following options:
Auto
UMTS(850+1900)+GSM(850+1900)
(oddly enough, the settings have to be on Auto for the phone to work..)
When I bought my diamond, I was curious about my sim too, so I took it into the ATT store and asked if it was the "latest 3G sim" and he said yes. Mine is half white (top) & half Blue (bottom), with a orange 3G fireball in the topright corner.
If yours matches all that, then take it to the ATT store and see if you get 3G in the store
Also..if you have doubts, I've had multiple Sales reps in the store tell me I can get a new Sim for free at any time, just need to ask.
3G
I do have that SIM half blue half white with the 3G fireball logo.
On my select network I have
Auto
GSM
WCDMA
on the GSM/UMTS band I have
Auto
UMTS(900+2100)+GSM(900+1800)
UMTS(850+1900)+GSM(850+1900)
UMTS(800+2100)
UMTS(850+2100)+GSM(900+1800)
UMTS(850)+GSM(900+1800)
UMTS(1700)
rpassmore
What ROM do you have?
RUU_Diamond_HTC_Europe_1.93.401.2
RUU_Diamond_HTC_Europe_1.93.401.2
Does this ROM supports USA 3G????
Sorry for my English
You have the European version and have only HSDPA 2100 / 900 (3G) and probably ATT works in HSDPA 850 / 1900, if this is the problem, sorry 3G is impossible for you, because is a hard problem, not a soft problem, search in this web there are many post about this. The European is quad band in GSM but not in HSDPA (3G)
CArlos
How about if I use another ROM
If I use another ROM ? would I be able to do 3G?
No I think it's impossible since it's different hardware I believe.
I think the one you have from UK, it only contained HSPA 2100 and US /Canada is using HSPA 850/1900, that's why you don't have the 3G signal.
Quad band only for voice and EDGE.
cmilian said:
rpassmore
What ROM do you have?
Click to expand...
Click to collapse
I'm using the stock rom/radio for the Unlocked US 3G.
1.93.422.4 WWE
1.00.25.08
But I missed the fact that you're using a European Diamond. sorry.
is there any conection betwen 3G and front camera....
i think i have an Eropean model from UK Vodafon which has the front camera... but i am not sure about 3G !
????
Hello all, sorry if this Thread was post on forum but i can't find it. So my problem of my kaiser is i Upgrade Official HTC ROM WM 6.1 ESP and my TyN II is Unblocket and i can get company Cell Phone Digitel TIM Venezulan but wen Network is Searching Get for 5 Sec. 3G and back to GSM normal i mean show icon E.
I checking other phone is HTC Touch and 3G work fine. can any one tell me is my Kaiser can get 3G?
Configuration all is Fine APN, HSPDA are on, GPRS Authentication PAP
PS. Digitel TIM don't have HTC TyN II (Kaiser) Product List.
Sorry my english sux :S
Should be able to get 3G as long as you have a TyTN II with the right bands... I think South America uses 850 and 1900, which if your TyTN II originated in Europe, it probably doesn't have the 850 band, which is the primary band for 3G, where as 1900 is usually used for voice over GSM and EDGE data.