in my header bar after installing kaisertweak. I have a half of a signal "tower" on there but the actual signal strength is missing and volume and little speaker are missing. Any suggestions for getting them back, and not a hard reset!
Edit: Forget it, I had installed Advance Configuration Tools on it and then deleted it and the settings stayed the same. I re-installed the app, made the changes and voila! Back to normal!!
Related
When I'm trying to call/receive a call, the screen is really messed up. Nothing appears, I get the start menu at the top which says "Phone" on it, the soft key labels at the bottom, and then the part of the screen where the dialer/call status/all that stuff is supposed to be just shows up white. I think it may have started when I tried to answer a call while my phone was locked, or maybe after I changed around the call settings with KaiserTweak so it wouldn't sleep/fast sleep during calls. I reverted those settings to the default, restarted my phone, and still no luck.
I don't really have anything that valuable on there so I'm not opposed to just re-flashing my ROM, but does anyone know what might be causing this? Thanks in advance.
Hi!
Someone I my Diamond does not show the battery indicator on the Home-screen anymore. It used to be there but now I can only get a analog or digital clock showing.
I haven't chenged any settings, not installed any apps or upgraded my firmware - the battery indicator is just gone.
Anyone know how to get it back?
Thanks!
Xophile said:
Hi!
Someone I my Diamond does not show the battery indicator on the Home-screen anymore. It used to be there but now I can only get a analog or digital clock showing.
I haven't chenged any settings, not installed any apps or upgraded my firmware - the battery indicator is just gone.
Anyone know how to get it back?
Thanks!
Click to expand...
Click to collapse
Did you try a soft-reset? (turn the phone off by pressing the power button on top. Make sure you wait for the warning dialog to appear. Then use the same button to turn it on again).
Hi Rendol1!
Yes, I've tried doing a soft-reset several times but still nothing happens.
Any other ideas/suggestions?
Thanks!
Anyone know?
I had the same issue and unfortunately it only came back when I did a hard-reset
Talked to HTC support a few hours ago and they had never, ever heard of this before.
The told me to do a hard-reset.
*sigh*
I had this problem, I resolved it by "restoring defaults" in the Sushi's Diamond TF3D config app I installed
Now the battery icon is back
hi,
Same for me, the only way was to hard reset !
This is really an annoying bug!
I don't want to hard-reset my Tocuh Diamond, especially now since they are suppose to release a new official ROM in december....
You could always just install 'batti' which puts a much more useful battery indicator at the very top of your screen.
If you get clock at today screen, use Advanced Config. Launch it, choose Today/Show on title bar and select the Battery option.
I went ahead and installed TouchFlow2d. Before I did I ran a back-up. Well I really did not care for the Touchflow2d so I removed it with MemMaid and went to my backup and reinstalled everything I had. Well the problem I have is sometimes when I press one of the selections on my windows screen, the battery status,speaker status, Internet status and phone signal status shows up. The same one that appears when you hit the little icons at the top on the screen. Then I press my selection again then it goes away and the selected program opens up. So go ahead a hit the battery, speaker etc icon at the top of your screen, and that's the one I am speaking of. I use the SBSH iLauncher and the HTC custom screen. Its happens approx 30% of the time.
Any ideas?
(Sorry - this was previously in the wrong thread category)
Hi,
after installing some software apps (numerous freeware utilities), my diamond does not ring anymore when I am called (it does vibrate).
I have checked everything but cant switch the darn ringing on again - other sonds work fine, it just doesn't ring. This is the second time this has happend - after the first time the hard-reset fixed the problem, but then I reinstalled several programs again and the same problem is back again.
Does anyone have any ideas what I can do about this without doing a hard reset?
Perhaps there is a Tweak utility where I can see if the ringing has been switched off?
Please help.
Thanks in advance - I would really appreciate any suggestions.
Berx1 said:
(Sorry - this was previously in the wrong thread category)
Hi,
after installing some software apps (numerous freeware utilities), my diamond does not ring anymore when I am called (it does vibrate).
I have checked everything but cant switch the darn ringing on again - other sonds work fine, it just doesn't ring. This is the second time this has happend - after the first time the hard-reset fixed the problem, but then I reinstalled several programs again and the same problem is back again.
Does anyone have any ideas what I can do about this without doing a hard reset?
Perhaps there is a Tweak utility where I can see if the ringing has been switched off?
Please help.
Thanks in advance - I would really appreciate any suggestions.
Click to expand...
Click to collapse
didi you installed pointUI and the SystemInternalsV2????
you might not like the answer, but hard reset has fixed that problem for me with the diamond and 2 other htc phones i had in the past.
adempozhari said:
did you install pointUI and the SystemInternalsV2????
Click to expand...
Click to collapse
What is pointUI ? - I have the standard diamond branded user interface from O2 with all the system internals and the ROM version 1.93.207.2 German.
Please help me - I really do not want to do a hard reset because the last time I could not retrieve my back up with the Sprite backup utility .
Thanks in advance for any help.
i can't believe i'm now posting in this. i remember telling you to post this on the main diamond forum and now i'm having the same problem.
i've tried putting the ringtones in the internal storage, and on the phone's main memory, sometimes i hear the ring for a split second before it goes silent.
from searching, it seemed like some people have had this issue with some SRS WOW program but I don't have that.
have you been able to resolve this? I too would like to avoid a hard reset if at all possible, i just got the phone setup the way i want it and it would take a ton of time to get it back....
This may sound stupid, but give it a try, it has helped before...
Go to the settings tab in TF3D.
Tap Sound
Set Volume at 100%
Sometimes, the ring volume gets reset to 0 by itself, and it took me 4 weeks before I found it, after trying about everything, from uninstalling every app to hacking the registry.
Twabi2 said:
This may sound stupid, but give it a try, it has helped before...
Go to the settings tab in TF3D.
Tap Sound
Set Volume at 100%
Sometimes, the ring volume gets reset to 0 by itself, and it took me 4 weeks before I found it, after trying about everything, from uninstalling every app to hacking the registry.
Click to expand...
Click to collapse
that's usually one of the first places i check... i'll keep it in mind though.
i think i might have an idea what my issue might be, so it was working this morning but i noticed microsoft's voice command was announcing the name of the caller as it was ringing. so i think it might be an issue with the msvc. i'm going to try disabling the voice announce and see what that does...
Problem Solved!
Hi,
guess what - I finally found the solution
I never bothered to read the Diamond manual as I believed the user friendly interface to be self-explanitory - however, I overlooked something very important!
When setting the volume up or down by means of the buttons on the left hand side of the Diamond, the usual vertical bargraph type of display appears and reacts according to how the adjutment is made with the volume up or down buttons, this is clear. There is also the possibility to mute the phone or to put it into vibration-only mode.
Now, at the top left hand side, there is an arrow (looks like this: <). If you quickly tap on that with the stylus before the screen goes away again, you will get a new screen for another setting - now this setting is for adjusting the ringing volume / mute / vibration settings (now the arrow is on the top right and looks like this: >
It is so simply expained: The system volume is not the same as the telephone ringing volume and just requires the quick click on the top left hand side of the screen and voila, bob is your uncle! You can then set the ringing volume up and your phone will ring again.
I wantend to know why the heck the ringing volume just changes or what caused the problem and I have also been able to determine why the ringing volume settings change - to explain:
When setting the SYSTEM VOLUME to mute - then the PHONE RINGING VOLUME is also muted! However, when then setting the system volume up again, the ringing volume still remains muted! This is important to know and it can also happen accidentally or it may be forgotten to reset the ringing volume. I dare to say that this was not really thought about very well and I hope the developers will change this or show a VOLUME STATUS for both the SYSTEM and RINGING volumes somewhere on the desktop/today screen.
... or would that not be a good project for a developer here on this forum perhaps? I would appreciate a comment here...
Thanks anyway for the kind responses and willingness for your help.
I have to date still not read the actual over 260 page little manual booklet, but it probably is described in there. Moral of the story: RYFM (for those who know what that stands for)
Amendment: Found it described on page 42 in the manual booklet - it's actually described there but can be easily overlooked and it is not described that the system volume settings affect the ringing volume settings.
Ok, so the phone rings now but I have a similar problem with my GPS receiver
I will open another thread for this - hopefully someone can help me.
Best regards,
Mike - Germany.
I had the same problem.
It happened to me.
All the system sounds were fine, but the ring wasn't there.
Checked settings, change ringtone, tried a lot of stuff.
I was begginning to think about a hard reset when I found my problem origin:
At least in the ROM that I use (Shaks), when you press one of the volume keys in the side of the phone, you change system and ring volume.
If I press it all down, it goes to zero then vibrate then silent, and normally the system and ringer volumes are equal when you do this.
In that system volume screen that appears when you press volume key, there is a arrow in the top left. If you press it, you'll go "ringer volume" screen. I noticed that system volume was in maximum but the ringer volume didn't fallow it.
That said, if your ROM uses the volume keys in that same way, press that arrow and check if the ringer volume is on too.
So I've searched all over to try and figure this one out, but there's a lot of similar issues and none that I could find that are the same thing. The description might end up long because I want to be absolutely clear about what's happening (since there were a lot of really similar issues I found when I searched).
I have a Motorola Droid running CM 7 (.0.3, i think), but the problem was also there on the last version of CM I was running (6.something, probably). The first time I wiped and installed CM7 the problem seemed to be solved, but I screwed up the account setup and on the 2nd install the problem was back.
ANYWAY, the actual problem is this:
My phone's sound will NOT turn off. I can turn it all the way down with the volume rocker, and it will show the Vibrate icon, but the volume bar will not go down that last little bit. It does not vibrate. It does not go to silent. If I turn off sound from the lock screen, it doesn't do anything except show a vibrate icon at the top. The volume level remains the same. Same goes for the sound toggle on the home screen menu. It just doesn't do anything except change the icon to vibrate, silent, whatever.
The only way I can get it to go to silent/vibrate is through the Sound menu in settings. Even then, I can't just check the Silent Mode box, I have to go to the volume dialog box and manually drag it all the way to zero. Then, if I hit volume up on the rocker or turn the sound up in any other way, I have to go back to Settings to change it again.
I'm going crazy trying to solve this. I've wiped my phone. It doesn't seem like a hardware issue since everything is working except the switch to vibrate/silent from sound-on mode. I've tried everything I can think of. I've had the phone for almost 2 years now, and I'm generally good at fixing this type of thing, or at least finding the answer on Google. Has anyone had this issue?
khorbin said:
So I've searched all over to try and figure this one out, but there's a lot of similar issues and none that I could find that are the same thing. The description might end up long because I want to be absolutely clear about what's happening (since there were a lot of really similar issues I found when I searched).
I have a Motorola Droid running CM 7 (.0.3, i think), but the problem was also there on the last version of CM I was running (6.something, probably). The first time I wiped and installed CM7 the problem seemed to be solved, but I screwed up the account setup and on the 2nd install the problem was back.
ANYWAY, the actual problem is this:
My phone's sound will NOT turn off. I can turn it all the way down with the volume rocker, and it will show the Vibrate icon, but the volume bar will not go down that last little bit. It does not vibrate. It does not go to silent. If I turn off sound from the lock screen, it doesn't do anything except show a vibrate icon at the top. The volume level remains the same. Same goes for the sound toggle on the home screen menu. It just doesn't do anything except change the icon to vibrate, silent, whatever.
The only way I can get it to go to silent/vibrate is through the Sound menu in settings. Even then, I can't just check the Silent Mode box, I have to go to the volume dialog box and manually drag it all the way to zero. Then, if I hit volume up on the rocker or turn the sound up in any other way, I have to go back to Settings to change it again.
I'm going crazy trying to solve this. I've wiped my phone. It doesn't seem like a hardware issue since everything is working except the switch to vibrate/silent from sound-on mode. I've tried everything I can think of. I've had the phone for almost 2 years now, and I'm generally good at fixing this type of thing, or at least finding the answer on Google. Has anyone had this issue?
Click to expand...
Click to collapse
A good way to try and debug the issue would be to install Widgetsoid 2.x(https://market.android.com/details?id=com.jim2&feature=search_result) and place a switcher on your homescreen with the different sound options such as silent and vibrate. Then, toggle those switches and see if your status bar icon changes, and if the phone is actually in vibrate or silent mode.
If that doesn't work then I would suggest to try another ROM, or perhaps it's a hardware issue.
Thanks, I'll try that and let you know the results.
Go to Settings -> CyanogenMod Settings -> Sound -> Silent State (check)