Another GPS Help Me Topic - Touch Pro, Fuze Themes and Apps

This is just my last resort I suppose. I recently flashed to NATF's v4.4 and 1.11.25.01 radio plus installed Google Maps on my att Fuze.
But when I go to locate myself Google Maps tells me "Your current location is temporarily unavailable". Sweet.
So what have I done thus far?
I've looked around and I've done the Advance config tweaks.
I've updated my Quick GPS.
I've ran the HTC GPS Tool (I honestly have no clue what I am looking at here lol but I do get a Mode 2: Not Fix thingy) for about 2 hours hoping for *something* to pop up.
Finally, I've done the GPS Test version 1.04 but it maintains itself at "Looking for GPS unit.
I've soft reset, hard reset and cried.
Is there anything else I'm missing? Any help would be mucho appreciated, thanks!

Hi Coola,
I am using the standard HTC-ROM.
0) First of all, I am not sure whether your GPS unit is working in your phone.
But assuming that the hardware is still OK do the following:
1) Go to settings > System > external GPS.
Check if all options are still normal.
Program port is COM4.
Hardware port : none.
Baudrate : 4800.
Access: Check automated GPS control.
NOTE that an external connected GPS (e.g. Bluetooth device) unit will have a baudrate of 4800. The internal which resides at Com4 has a standard baudrate of 57600. These settings need to be checked to make sure they are still this way and it will also give Windows automated control of the GPS system.
2) You need to install Advanced Config 3.3.
http://www.touchxperience.com/fr/out…ol-32-cab.html
With Advanced config 3.3 under GPS:
1. disable A-GPS
2. disable GPS logging
3. logfile name must be empty
4. old logfile name must be empty
5. maximum size of logfile must be 0
6 delete the files : \windows\GPSLogFile.txt and \windows\GPSLogFileBack.txt
After these settings the tool will soft-reset your mobile.
3) Then edit registry with TotalCommander
http://ghisler.fileburst.com/ce/tcmdpocketarm.cab
Don't make any errors here, check your steps carefully.
These values seem to work fine and give you a much quicker fix.
Under: HKLM\SYSTEM\CurrentControlSet\GPS Intermediate Driver\
- Drivers\GpsOneDevice\PollInterval -> 100 (default is 1000)
- Drivers\InputBufferSize -> 512 (default is 4096)
- Drivers\OutputBufferSize -> 512 (default is 4096)
- Drivers\SleepOnNoData -> 100 (default is 1000)
- Multiplexer\MaxBufferSize -> 512 (by default not present, you have to create it, make a Dword value)
After these settings are in place, restart / soft reset your device.
4) Run the program QuickGPSfix and download the new data.
This step needs to be repeated anytime it is outdated.
5) Download and install the HTC GPS Tool.
http://rapidshare.com/files/84815853...C_GPS_TOOL.cab
Upon starting it should show COM4 and a Baudrate of 57600.
Go outside the house, preferably with good wheather.
Hit the "Open"
Hit the "Nav. Int."
Leave all as is, no need to change the options.
You should now start to see the GPS data flow over your screen in the grey area. Wait patiently, the first fix can take up to 10 minutes (afterwards it wil go faster). If it fails it sometimes seems to help to move around a little bit and to reboot your device if it takes way to long.
See if you have any red bars below the satellite numbers (signal strength per satellite) When you get a fix, the bars and satellites to which it is connected will show up green. If there are no red bars here, no data flow etc then there is something wrong with the ROM / radio combination and your phone.
Close this program if you have a fix.
6) Start-up Google maps. Wait for it to download the basic map information, so you don't have any interference from the "now downloading data" message. Then start the GPS use. Fix should now go fast. Once it has a fix you can start moving towards your destiny.
From now on use HTC GPS tool to get a fix.
Close this program, start the program with which you want to use GPS.
Good luck, Jouke.

Coola said:
This is just my last resort I suppose. I recently flashed to NATF's v4.4 and 1.11.25.01 radio plus installed Google Maps on my att Fuze.
But when I go to locate myself Google Maps tells me "Your current location is temporarily unavailable". Sweet.
Click to expand...
Click to collapse
the location Google Maps is trying to get is from the "cell towers", make sure your selecting com4 or MS controled Gps. In other words , google trys to locate with towers first. Then if you select to use GPS, it will try using your Gps setting under options. If you already know all this, then disregard my post, if not, then I hope it helps!

Ah I see what I did wrong. Thank you guys for the clairification!
I had previously made all of these tweaks and I did see some green bars but it never said fixed, which I assumed it would.
I did the HTC GPS Tool and booted up Google maps and voila! It found me
Thank you thank you thank you!

Related

WM5: Full installation guide for TomTom 5 with BT GPS

Rather easy, really.
1. Download the 5.10 upgrade from TomTom (You don't have to install the original 5.0 from the CD first). The file will be either an exe file or ppcup510.zip.
2. Unpack the zipfile (don't run the exe directly from WinRAR or similar programs, that will make it a lot harder to find the directories you want, unpack it to somewhere first). Run the update on the Windows PC. When the first window appears, go to the directory where the update is run from. Don't close the TomTom window, or the files you want will be deleted. You will see some new directories there, and what you want, is "nvapp". Within that you'll find a subdirectory called "app". Copy the four cab-files from that to your PPC, either via the network or ActiveSync. Never mind the ini files.
3. Go to your TomTom CD and find the directory Voice. You'll need to find the correct voice file. For Norway that's nor.cab, for Denmark it's dan.cab and so on. Copy that to the PPC as well.
4. Finally run all the five cabfiles. It doesn't matter which one you run first.
You're done. Of course there's the GPS as well:
1. Pair the Bluetooth GPS with the PPC.
2. Go into Settings, System, GPS. Set Program and hardware port to none and remove the tick from the box "Manage GPS automatically".
3. Settings, Connections, Bluetooth, COM Ports. Create an incoming port (I use COM8). Some ports will give you an error. Also create an outgoing port. I use COM7, and that is called "HOLUX GR-230 (COM7)" since I use a Holux GR-230 GPS.
4. Open TomTom and go through the regular setup. When you come to GPS setup, choose "Other Bluetooth GPS" and set that to the same port as your outgoing port. On my GPS that means COM7. Within 15 seconds your GPS should send signals. And you're good to go TomTom-ing!
And this was my post number 100. I'm so proud! :wink:
Thanks
I have added this to wiki but am not sure that it is for both WM5 and Ce2003.
http://wiki.xda-developers.com/index.php?pagename=BA_Install_TomTom
WM5. You can simply run the installation app for WM2003SE, at least if you haven't installed AS 4, I have a sneakin' suspicion that it is the culprit, and not WM5 itself. And 2003 doesn't have the GPS applet in Settings.
And thanks! I tried to add it to the Wiki myself, but I'm hopeless with HTML and I haven't done any Wiki work...
Edit: Saw the note in the Wiki. I have done this twice on my WM5 Qtek 9090, it works as a charm.
Wiki is a piece of cake has Zero to do with coding.
use the edit button and you will see it.
There are one about 5 things you need to know and all of them you will see if you edit a page.
Maybe you would like to add your notes to the page!
Yeah, that was easy. It was creating a new page and linking to it that I couldn't get a grip on. Comments added.
Woo, Thx a lot. finally, i got tomtom 5 running on my ppc.
but anyway, anyone who has USA maps can share with us?? Westcost of USA is most importemt area for me.
Thanks again!!!!!!
Mastiff
If you go back a page and edit it you will see how to create a page.
After you have done the link a ? comes up, you then have to click on that to enter the content.
All Pages strart with BA_ or BA_WM5.
To get a feeling for links just edit a page that has one in it.
Check out the Wiki development Page on the root of BA wiki, You can set up a test area to create your own pages, edit format them ansd then post them when they are done. (you will see my page, edit it and will be able to work the rest out.)
If you have issues then pm me, I will also move files form Upload to a proper place and correct the link.
Have fun.
OK, thanks. I'll try that if I ever have anything worthy of the Wiki again... :wink:
Well, Tomtom is installed succesfully, but the registration of The Benelux map will not work.
This problem wasn't an issue before. With the TomTom 5.00 version from Bakonl.
Someone suggestions?
i got tomtom 5 installed and running fllowed by this guide. however, i copy the California Map to the root of SD Card. but tomtom shows "map not find"??
how to install a map. or i did something wrong?
by the way, i got map from my friend, he bought tomtom from bestbuy. i don't have full copy of tomtom 5. just downloaded the update package from tomtom.com
I just want to thank you for the great info on BT setup for GPS. I was trying to setup my Iguidance and Mapopolis with a Belkin BT GPS and had no luck. WM5 takes some getting used to.
Cheers!
Mastiff said:
Rather easy, really.
1. Download the 5.10 upgrade from TomTom (You don't have to install the original 5.0 from the CD first). The file will be either an exe file or ppcup510.zip.
2. Unpack the zipfile (don't run the exe directly from WinRAR or similar programs, that will make it a lot harder to find the directories you want, unpack it to somewhere first). Run the update on the Windows PC. When the first window appears, go to the directory where the update is run from. Don't close the TomTom window, or the files you want will be deleted. You will see some new directories there, and what you want, is "nvapp". Within that you'll find a subdirectory called "app". Copy the four cab-files from that to your PPC, either via the network or ActiveSync. Never mind the ini files.
3. Go to your TomTom CD and find the directory Voice. You'll need to find the correct voice file. For Norway that's nor.cab, for Denmark it's dan.cab and so on. Copy that to the PPC as well.
4. Finally run all the five cabfiles. It doesn't matter which one you run first.
You're done. Of course there's the GPS as well:
1. Pair the Bluetooth GPS with the PPC.
2. Go into Settings, System, GPS. Set Program and hardware port to none and remove the tick from the box "Manage GPS automatically".
3. Settings, Connections, Bluetooth, COM Ports. Create an incoming port (I use COM8). Some ports will give you an error. Also create an outgoing port. I use COM7, and that is called "HOLUX GR-230 (COM7)" since I use a Holux GR-230 GPS.
4. Open TomTom and go through the regular setup. When you come to GPS setup, choose "Other Bluetooth GPS" and set that to the same port as your outgoing port. On my GPS that means COM7. Within 15 seconds your GPS should send signals. And you're good to go TomTom-ing!
And this was my post number 100. I'm so proud! :wink:
Click to expand...
Click to collapse
Just happy to be able to help. I've gotten so much help on this forum that it's good I can give something back. Also I struggled like crazy with this, and most of the stuff is just compiled from other posters.
I have installed tomtom 5 but I can't install language.
On my cd I got languages as zip files called **1,**2, etc
I don't find a cab file.
voices are ok now
but gps status is searching for 30 min,I got 2 blocks on status but still no gps connection!!???
Backlight Tomtom 5 with wm2005
The installation works perfect but when i start tomtom5, my backlight is going down. If i look at the backlight settings then they are OK. If i change one of the backlight settings while tomtom is active, the backlight is going on.
Mastif's solution is nice, but imho not conceptual
Mastif, thank you for your solution. But I think it isn't working at all. I'm talking about Blue Angel (WM5) and ASUS BT-100 GPS reciever.
I had big problem connecting TomTom 5.0 to GPS reciever under WM5. Devices were paired well, but TomTom 5.0 (and all other GPS programs) were not able to see serial port on which devices communicated. Avialable were just COM 1, 2 and 9 + BT UART. GPS was paired on ports 7 and 8.
After a lot of attempts I found a solution (IMHO supposed by MS as default):
- turn on Manage GPS Automatically in settings
- set correct hardware port where is GPS paired (COM8)
- choose port where programs should see GPS (COM7)
- start GPS application
- if I understood well, after first applications attempt to recieve GPS data, OS will create "virtual" GPS on port COM7, pair it with real GPS (the same PIN) and start to use it.
- voila! TomTom (5.0) started working!
BUT! This process is not repeatable! I spent a lot of time to start it again, with very bad success, sometimes ok, sometimes not. And I can't imagine that I will write PIN code for GPS pairing at every start of TomTom (eg in moving car
So I tried Mastifs solution with partial success, I upgraded TomTom at 5.1, turned off GPS sharing feature, paired GPS and TomTom 5.1 seems to be ok. But other programs not! They don't see paired COM port as well...
Any other advice? I need to complete this task to November, 1st, because I will drive Atlanta - Key West - and back. I need a satellite navigation! Last month I made a "little" trip Prague - Germany - Netherlands - Belgium - France - most western part of England and back, major part I drove alone and can't imagine driving without TomTom! But it was with MDAII (Himalaya), now with Blue Angel I am nearly lost!
Mastiff said:
Rather easy, really.
1. Download the 5.10 upgrade from TomTom (You don't have to install the original 5.0 from the CD first). The file will be either an exe file or ppcup510.zip.
2. Unpack the zipfile (don't run the exe directly from WinRAR or similar programs, that will make it a lot harder to find the directories you want, unpack it to somewhere first). Run the update on the Windows PC. When the first window appears, go to the directory where the update is run from. Don't close the TomTom window, or the files you want will be deleted. You will see some new directories there, and what you want, is "nvapp". Within that you'll find a subdirectory called "app". Copy the four cab-files from that to your PPC, either via the network or ActiveSync. Never mind the ini files.
3. Go to your TomTom CD and find the directory Voice. You'll need to find the correct voice file. For Norway that's nor.cab, for Denmark it's dan.cab and so on. Copy that to the PPC as well.
4. Finally run all the five cabfiles. It doesn't matter which one you run first.
You're done. Of course there's the GPS as well:
1. Pair the Bluetooth GPS with the PPC.
2. Go into Settings, System, GPS. Set Program and hardware port to none and remove the tick from the box "Manage GPS automatically".
3. Settings, Connections, Bluetooth, COM Ports. Create an incoming port (I use COM8). Some ports will give you an error. Also create an outgoing port. I use COM7, and that is called "HOLUX GR-230 (COM7)" since I use a Holux GR-230 GPS.
4. Open TomTom and go through the regular setup. When you come to GPS setup, choose "Other Bluetooth GPS" and set that to the same port as your outgoing port. On my GPS that means COM7. Within 15 seconds your GPS should send signals. And you're good to go TomTom-ing!
And this was my post number 100. I'm so proud! :wink:
Click to expand...
Click to collapse
Hi firstly thanks for this method I'm so happy to have it working on my pda (your a champion)...One issue i have encountered is that even after installing off the update of 5.10 in prefs it says it is 5.0 which is odd to me as I have it working fully and as far as I know it doesn't have any probs with the probs of 5.0 but saying this i'm not sure how I would know if it is having probs with my vga etc etc
thanks in advance
Kind of strange. Mine says "Prg. Version 5.100 (5160)" under Preferences, Show version.
Thx for the guide, I finally got TT working again on wm5 !
One snag though ... TT5 doesn't appear in the Today screen, even when I select this program in "system - today" :?
XDA EXEC
MDAIIIUser said:
Thanks
I have added this to wiki but am not sure that it is for both WM5 and Ce2003.
http://wiki.xda-developers.com/index.php?pagename=BA_Install_TomTom[/quoteHI I'm wounded if you could help me please I have been trying to get tomtom5 to work on my exec for some time now with out any joy , I have tried your way and when I go back to the PPC it just tells me the is no application please run set up first . It would be so great full as I'm a lorry driver and very stuck with out it cheers.]
Click to expand...
Click to collapse

HTC P3600 Oficial ROM Upg - Where's GPS???

Hi!
I did the oficial ROM upgrade and everithing seems to work fine except that i can't seem to find the GPS anywhere?
Can anyone help me?
Thanks,
JP
Hiden GPS Icon
Having tried the new HTC rom I found that the GPS WAS enabled (Tried it with Tomtom 6) but the GPS Icon in the settings menu is still hidden.
To enable/unhide the icon use a registry editing program and change the numerical value of the DWORD string that reads 'HIDE' from '1' to '0', then soft reset the device.
There are a couple of threads that can explain how to do this in more detail elseware on this forum.
1.
Sometimes GPS takes too long to fixup
Hi!
I discover the problem. Sometimes the GPS takes 10 or 15 minutes to fixup!!! I've read that this is a known problem without solution.
Thanks anyway.
JP
jpierre70 said:
Hi!
I discover the problem. Sometimes the GPS takes 10 or 15 minutes to fixup!!! I've read that this is a known problem without solution.
Thanks anyway.
JP
Click to expand...
Click to collapse
Not first fix, on clear sky, without moving during fix? I've read only one complaint, and it didn't say the conditions that made that fix so long.
devious246 said:
Having tried the new HTC rom I found that the GPS WAS enabled (Tried it with Tomtom 6) but the GPS Icon in the settings menu is still hidden.
To enable/unhide the icon use a registry editing program and change the numerical value of the DWORD string that reads 'HIDE' from '1' to '0', then soft reset the device.
There are a couple of threads that can explain how to do this in more detail elseware on this forum.
1.
Click to expand...
Click to collapse
In the regisrty there are a lot of folder wich one contain the DWORD?
if this is your level of understanding of the registry I strongly suggest you DO NOT try and modify until you thoroughly research it!
You may end up having to hard reset your device.
I already modify it last time but i forgett where theDowrd is..Under wich menu on the registry
OK Brigate- sorry just wanted to warn you!
I would do a search- this took me 10 nano seconds ;-) It's quicker than posting and waiting for a reply.
/snip
HKEY_LOCAL_MASCHINE\ControlPanel\GPS Settings
Add a DWORD called "Group" and give it the value of "2" (dec) keep the Hide key but change the value to 0 and delete the redirect value and soft reset
If you have a GPS device, you can add a GPS settings icon to your Start > Settings menu using:
HKLM\ControlPanel\GPS Settings\Group = 2 (DWORD decimal)
HKLM\ControlPanel\GPS Settings\redirect <-- delete, or rename, this value
Note that '2' stands for the Connections tab, '1' is System and '0' would be Personal
Note also that this has reportedly disabled one person's USB connectivity. To restore, set "GPS Program Port = None", "GPS Connection Port = None", "Automatic GPS Management = on"
/ snip
This rings a bell- I tried it a long time ago on my M600 thinking the icon would help (it just stopped my BT GPS working!)
Well thx a lot
I use resco to modify the register but every time i do a softreset it returns all as default... So at last i can`t get the GPS ICON
BrigateGB said:
I use resco to modify the register but every time i do a softreset it returns all as default... So at last i can`t get the GPS ICON
Click to expand...
Click to collapse
JUST TRY IT A SECOND TIME, I HAD THE SAME PROBLEM,
IS THERE A WAY TO TURN GPS OFF. I LIKE TO USE THE BLUETHOOT UNIT
BrigateGB said:
I use resco to modify the register but every time i do a softreset it returns all as default... So at last i can`t get the GPS ICON
Click to expand...
Click to collapse
Don't soft reset the phone, power off and on after by pressing the power button on the side until a question shows in the screen.
I found a programm for Trinity it´s Trinity Hacks and it do this.... So thx for the trick

Setting up a bluetooth profile

Guys
I am having real problems getting my GPS to talk to my XDA11i . the two devices appear to talk to each other ( flash furiously) but tom tom doesnt recognise it.
Bluetooth manager confirms there is an active connection.
I believe that the BT profile is not set up correctly.
I can go to BT settings and make a new profile , selecting serial transfer etc and then give the profile a name , BUT , each time I select the profile whilst the access permissions are still as set , when I open the services tab no services are selected ! despite selecting it when the profile was set up ?
Any thoughts here ?
Astro1
Go to BT parameter -> services -> serial port -> options
Write down IN/OUT port number, report the OUT port number to you GPS software.
If pb still exists, try to use "Franson GpsGate" or NMEA as connection within gps software.
Tried that !
Hi NewbiePDA
Been there and tried that , the outgoing port is port 6 and in tom tom 's configuration choices the choice of port 6 is the only oje that seems to get any where ( activity from the LED on the GPS unit ) all other port choices given turn off the GPS.
Ive got a copy of franson gpsgate but got nowhere with it ,
It has to be a simple configuration problem !
I have set up a spp profile in BT settings ( and called it tom tom ) I have ticked the serial connection and then Enable service box then closed down ( hit ok). Upon re opening the profile serial port choice is no longer chosen ? any ideas ?
Best Regards
Astro1
Hi Astro1,
I think that creating spp profile is unnecessary, my procedure is as below:
1) Pair you devices
BT -> BT manager -> tools -> pair device -> add
browse you BT devices then you should see you gps icon appear, click on it, then type you password to pair, usually is 0000
2) back to BT manager, choose "new", choose discover a BT device, again, you should see you gps device, click on it, normally you get spp service, just follow the step by clicking "next"...
If you can't see any services available then turn off you BT gps device, turn off you Xda2i BT, soft reset, then turn on gps, back to step 2)
3) If pb remains, probably it's due to tomtom's bt stack, try rename BtCoreIf.dll BtSdkCE30.dll (in \windows folder) to others name, or delete them.
Hope that helps.
re name or delete
Hi Newbe
I am trying to delete or rename the two files you note , I have seen this on other sites as well .
Like you XDA11i says that the files are in use and read only / archive /hidden or in use etc.
It will not let me touch them !
Any ideas of a file manager or software that will let me work on them ??
Astro1
Astro1 said:
Hi Newbe
I am trying to delete or rename the two files you note , I have seen this on other sites as well .
Like you XDA11i says that the files are in use and read only / archive /hidden or in use etc.
It will not let me touch them !
Any ideas of a file manager or software that will let me work on them ??
Astro1
Click to expand...
Click to collapse
download and install gpsdash2 and in the connection settings click on auto config, it will find you gps receaver ad set itself up, this will also give you the correct bt settings, it will show you if everything is working okay. and some cool features.
i had to do this with my jentro bt unit
Hi Skeevee
Ive tried that one too .
GPS gate checks trhe ports and the blue led on the Bluetooth GPS unit flashes furiously ( as if they are talking ) , but GPS gate reports unable to find GPS ???
This is loosing me , it seems to me that the two devices are talking but that there is a comms / set up problem .
TT6 tries to talk to the GPS as well but gets no where ?
Astro1

Ever since upgrading ROM to 1.62 GPS sucks?

Seems like after updating the new patch they released that upgrades to 1.62 when I go to google maps and use "GPS" it doesnt work half the time.. and the other half the time it puts me off by a couple streets...
used to work just fine pre upgrade =/
bump... anyone?
maybe i have to change GPS settings on the phone? what should the ports or w/e be set to? like COMM1 or w/e?
What app are you using to map/view the coordinates?
I am interested in your problem, as I use the GPS quite often with the GPS Photo capability, but haven't updated the ROM yet. (I'm in a different country at the moment and don't want to break something that isn't broken with the upgrade without a quick solution to fix.)
I wonder if it's just a mapping issue and if you've tried different programs, (Google/MS Live Search), or if you're using TomTom.
Let me check my settings...
Programs Tab: Com4
Hardware Tab: None
Access Tab: Manage GPS checked
These settings work for me with MS Live and Google Maps. I hope this helps you. Drop some feedback on your success, or lack of, if you don't mind.
i use google maps... and used them with previous firmware as well. havent tried any other services.
just checked.. i have settings set to same as you.
can you check if you got "assisted GPS" turned on in Keiser Tweak?
Good question. I only recently (two days ago) updated to the new Kaiser Tweak and previously used the old one. The aGPS option wasn't in the old one and I haven't used the GPS since the Kaiser Tweak upgrade.
Ok, just fired up MS Live Search and with aGPS enabled, it pulled up the map location fine.
I also have VisualGPSce installed and that works fine with the GPS. The settings on that are for Port: COM4 at 9600 baud.
Google Maps Mobile also works. It's set to the Windows default for the GPS option.
I don't know if aGPS was turned on by default before (Old Kaiser Tweak). I'll give it a try though and see if I get better results. I'm currently in Japan and aGPS system is alive and well here.
Download and try out the VisualGPSce program. http://www.visualgps.net/VisualGPSce/
It will kick back data right away on what satellites it can view. Use the same settings as I do above. At least you won't have to wait for it to get a fix, to see if the GPS is working.
Direct link to the cab file: http://www.visualgps.net/VisualGPSce/VisualGPSceInstall.CAB

GPS with Google map is not working

Hi,
I try to use Google map with GPS but it's success! Seem Google map can't detect any satellites. Anyone has the same problem? Who has experience to fix it?
Thanks.
Works OK for me, the first time took a while to lock on but OK after that. Make sure you run QuickGPS as well
Thanks for your reploy! I did enable A-GPS by Advanced Configure and run QuickGPS but the google did not work! It tried to seek satellites but nothing found!
The first time I ran the program it had to have a clear line of sight to the sky for a few minutes - between 5-10 i think.
After that it should be a bit quicker, but of course it doesn't often work inside a house so you may need to stand in your garden
Try this : Menu / Options / GPS setting / Manual setting (approximately, I have it in czech),and I have in other application COM4 and Baud-rate 4800
I've had the same problem in the beginning. GMaps couldn't connect to GPS at all.. I then set the GPS settings to manual, but it didn't work.. Reverted to automatic and got the gps working within 15 seconds!
Hope this helps
Hi
Thanks for your reploy! I did enable A-GPS by Advanced Configure and run QuickGPS but the google did not work! It tried to seek satellites but nothing found!
Click to expand...
Click to collapse
This setting is a waste of time, as you need your mobile operator to support A-GPS for a start, and then you must have the correct settings entered which are not exposed in Advanced Configuration. By default the phone will be trying to contact an HTC test server which can't be reached from any mobile network.
Disable A-GPS for best results unless you have the settings required and it is supported by your mobile operator.
Regards
Phil

Categories

Resources