Updated guide to installing win7 on your shift. - Shift Development

This is just an updated version of deadnex's original guide, with a few things thrown in from various people who have found what works and what doesn't.
This guide has been used and tested as effective with the windows 7 rc 7100 build.
Step 1 - Go here http://www.microsoft.com/windows/windows-7/download.aspx and download Windows 7. You can get a key from the same place, so don't worry about not having a key.
In the event that the servers aren't offering the download {due to server issues} you can download a current version through a torrent site. I recommend mininova as it's the most legitimate of the bunch.
To get a key for windows 7 (32bit) (if you downloaded it through a torrent site), go to this address https://www.microsoft.com/betaexperience/productkeys/win7-32/enus/default.aspx
(64bit)
https://www.microsoft.com/betaexperience/productkeys/win7-64/enus/default.aspx
To clarify this part, you're setting up a usb flash drive or usb card reader and sd card to work as an installation drive for windows 7. I've followed these steps exactly, and found them to be completely accurate. They work, so do each step, and make sure to keep track of your steps so as not to miss one.
Thanks to deadnex for all of this information.
USB-install:
User feedback suggests that doing this next part should be done on a computer running windows vista. In winXP, your usb drive might not show up during the process.
edit (before step 1, create a folder on your main computer called windows7. Don't do this on your shift, and it's recommended to use c:\windows7\ to make the process easier. If you use another location to extract the files to, make sure to remember which directory it is, and adjust the steps of this tutorial to your own location.)
1 - Open the windows7 Iso file with winrar, and extract all the files into C:\WINDOWS7\ (or the folder you created as mentioned above)
2 - Open command prompt in administrator mode (start - all programs - accessories - (right click) Command Prompt and select run as administrator.
3 - Then type these commands without the - and press enter after each :
- CD\
- DISKPART
- LIST DISK
- SELECT DISK X ( X is the memory stick disk number you got from LIST DISK)
- CLEAN (CAUTION; THIS WILL ERASE ALL THE CONTENTS OF THE SELECTED DISK)
- CREATE PARTITION PRIMARY
- SELECT PARTITION 1
- ACTIVE
- FORMAT FS=FAT32 QUICK
- ASSIGN
- EXIT
- XCOPY C:\WINDOWS7\*.* /S /E /F U:\ (U:\ is the name of usb drive you are using for your install, if your drive has another letter, which is most likely, of course put in your own) (after *.* and after each letter preceded by / there's a space!)
OPTIONAL- Include an extra folder on your windows7 usb drive called drivers, and put all the drivers in there that you'll need to get windows 7 running smooth. Drivers are listed just a little further down on the page, so before completing the next step, go there and get the drivers.
WARNING- THIS WILL ERASE YOUR VISTA AND REPLACE IT WITH WINDOWS 7. THIS IS IT!!! Don't worry, win7 rc 7100 is far better anyway. Just to be safe though, backup your personal data before continuing to the next step.
[edit] With a little use and time, I've come to find that windows 7 has a great amount of compatibility issues with certain games. Although I've only had the chance to try a few, there seems to be a trend with win7 being unable to run a lot of older, but still 3d, games. Warcraft 3, and Dungeon Keeper 2, to be more specific. If you're not a gamer, it shouldn't matter, and Windows 7 is still the best choice for you. If you do like to play games, you might want to reconsider changing to windows 7. [edit]
Restart your computer, at startup push FN+F10, and choose your usb drive.
This will take you to the installer, select your language, timezone, and keyboard layout. Next.
In summary, you're going to select Custon (advanced) in the windows 7 installation process, and some card readers (sd to usb) don't work.
This will not affect your HTC SHIFT Vista recovery partition but it will remove Vista itself from your shift. Your settings from Vista will not be carried over to Windows 7.
_________________________________________________________________
DRIVER DOWNLOADS AND INSTALLATION.
Well, once you're through all that, you should be looking at your new windows 7 shift. Now's the fun part! Driver installation!
Go to this link, and download all of the drivers. (10 in total)
http://www.htc.com/www/SupportDownload.aspx?p_id=60&cat=1&dl_id=82
Putting these files on the same flash drive as your windows 7 install makes matters much easier for this time and next time should you need to try again. I also recommend copying and pasting the installation order from the htc site in a notepad or wordpad file and putting that in the same folder as your drivers. That way, when it's time to install your drivers, you can open that file, and use it as a reference to ensure you have the order correct. Chances are that your shift won't connect to the net, right after the win7 installation.
IMPORTANT IMPORTANT IMPORTANT
INSTALL EACH DRIVER IN THE ORDER THAT HTC HAS LISTED ON THEIR DRIVER DOWNLOADS PAGE. DO THIS OR FACE TOTAL DEATHKILL!!! actually, you'll just have driver issues, but that SUCKS!
After many people have responded, I wish to remind everyone. Install all the drivers. INSTALL ALL THE DRIVERS. Install all the drivers. Yes, I said that three times. Although your shift seems to work, when only installing a few, the fact is, drivers like the synaptics touchpad driver also control other parts of your shift, like the two face bottons above the touch pad. If you install one driver, and skip one in between, you mess up the order of installation that is so important, and then force yourself to need an entire wipe and reinstallation of win 7. So, one more time, INSTALL ALL THE DRIVERS FROM HTC.
One more important thing to know about the drivers is, DON'T LET WINDOWS RESET AFTER INSTALLING EACH DRIVER, select RESTART LATER AFTER INSTALLING EACH DRIVER. I REPEAT, INSTALL ALL DRIVERS (IN ORDER) BEFORE RESTARTING WINDOWS.
IMPORTANT When you've finished installing your drivers but still need to restart to take effect, go to your display settings (right click the desktop) and select a non aero theme. save settings after that. Windows 7 Basic is a non aero theme and it looks good. If you leave Aero enabled, your shift will blue screen of death crash when it boots into high res mode.
Windows 7 can not run Aero in high res on the shift. (for now, at least)
When you install the drivers – beware that you have to install them with Vista Compatibility mode enabled and run as Administrator. Right-click the driver setup file – click the Compatibility tab – select Windows Vista and mark “run this file as Administrator”
To save yourself a headache, copy and paste the following list into a wordpad file and place it in the same directory as your driver downloads. Putting this list in the same directory on your win7 flash card means that you can open it on your shift after installing win7 and use it as a reference when installing your drivers. Keep it all together.
EACH DRIVER IS 100% IMPORTANT AND NEEDED, DO NOT SKIP DRIVERS, EVEN IF THAT DEVICE SEEMS TO BE WORKING ALREADY. SKIPPING THE TOUCHPAD DRIVER MEANS THAT THE RESOLUTION AND COMM CENTER BUTTONS DON'T WORK. SKIPPING THE SOUND DRIVER MEANS THAT CERTAIN APPS WILL CAUSE THE SYSTEM TO BLUE SCREEN. SKIPPING THE VIDEO DRIVERS MEANS THAT CERTAIN APPS WILL CAUSE THE SYSTEM TO BLUE SCREEN.
DON'T SKIP DRIVERS.
Here's the order.
a. VISTA_INTEL Chipset Driver v8[1].3.0.1014
b. Intel VGA driver(7[1].14.10.1461)
c. VistaECDrvV1[1].0.1.10
d. TouchScreen(1[1].1.0.2)
e. Synaptics MicroPad(10[1].0.11.1)
f. Realtek Audio Driver R197(6[1].0.1.5653)
g. Vitakey _AC5023_Fingerprint AP v5[1].0.2.0 and Driver v7.10.1.0 *
h. Extension Kit USBLanDriver(3[1].8.3.7)
i. Shagctrl_1[1].2.6.122-control center
j. Marvell WiFi driver(8[1].114.123.139)
This next part was contributed by Thaihugo. Thank you a ton for this contribution Thaihugo .
To connect the Windows Mobile (your Shift's other OS) side to the PC side of your Shift, run USB Tools in the windows mobile side. If nothing happens, go to your settings (still in mobile)- Connections, then click on "USB to PC". Uncheck the "Enable advanced network functionality and wait at least 5 minutes to see if it connects (you must enable the port in USB tools first). Another note, some roms, for the wm side of shift, don't include the internet sharing app. If you can't find it, you've got a crap rom, and you should follow a guide which will allow you to put a real rom on it.
Make sure you are connected to the internet on win7 side (using wifi for example) to download WMDC (Windows Mobile Device Center).
If WMDC doesn't load, plug another pocket pc into the shift's usb port while running windows7 and it will download , or if you don't have another pocket pc lying around, download it manually from Microsoft.
Also, after this setup, the Snapvue side might turn off and not turn on again. In this case, reset under vista side using the HTC tools, and go to the power settings (long click or right click on the battery icon in the bottom right of your desktop). Disable all the "turn device off after x min" settings and make sure to click ok to make the changes effective.
Again, a big huge thanks to deadnex for originally posting the steps to this process. And thanks to everyone else who contributed to a better running shift via windows 7.
Caid.
444

You forgot to specify that drivers must be installed with Vista Compatibility mode enabled and run as Administrator

Everythnig works fine for me untill.. I boot from usb go to "install now". And then ...
"A required CD/DVD drive device driver is missing.If you have a driver floppy disk,CD,DVD or USB flash drive please insert it now.
Note: If the windows installation media is in the CD/DVD drive, you can safely remove it for this step"
I go to browse and then " No device drivers were found.Make sure that the installation media contains the correct drivers, and then click OK".
I'm completly lost help..

thanks for the reminder.

weird, list disk doesn't list my usb flash drive but lists all my other hard drives. what am i doing wrong?

You are probably under Windows XP. Try a vista computer or another computer for this operation.

Caid444, you can upgrade your guide with the following info:
To connect the Windows Mobile side to the PC, use the USB tools. If nothing happens, go to settings, Connections then click on "USB to PC". Uncheck the "Enable advanced network functionality and wait at least 5 minutes to see if it connects (you must enable the port in USB tools).
Make sure you are connected to internet on vista side (using wifi for example) to download WMDC.
If WMDC doesn't load, plug in another pocket pc using the USB port, or download it manually.
Also, after this setup, the Snapvue side might turn off and never turn on. In this case, reset under vista side using the HTC tools, and go to the power settings (long click on the battery icon). Disable all the "turn device off after x min".

Thanks for your description. It looks good. Only onr thing let me bluescreen
my Shift. Whenever I install Synaptics MicroPad(10[1].0.11.1) my Device ended with a bluescreen. I tried a newer Version from the website, but no way, same result. Does anybody understand why? Does someone found out same?
Greets
Androgyn

thaihugo said:
Caid444, you can upgrade your guide with the following info:
To connect the Windows Mobile side to the PC, use the USB tools. If nothing happens, go to settings, Connections then click on "USB to PC". Uncheck the "Enable advanced network functionality and wait at least 5 minutes to see if it connects (you must enable the port in USB tools).
Make sure you are connected to internet on vista side (using wifi for example) to download WMDC.
If WMDC doesn't load, plug in another pocket pc using the USB port, or download it manually.
Also, after this setup, the Snapvue side might turn off and never turn on. In this case, reset under vista side using the HTC tools, and go to the power settings (long click on the battery icon). Disable all the "turn device off after x min".
Click to expand...
Click to collapse
I've added this part, thanks again Thaihugo.
Caid
444

thaihugo said:
You are probably under Windows XP. Try a vista computer or another computer for this operation.
Click to expand...
Click to collapse
You're right. it's all good though, i used MBRWIZ to take care of that minor setback. I can boot Windows 7 thru a USB drive now. I'm still on the fence about it, i have Vista Ultimate on my Shift right now. From your experience will Win 7 be drastically better?

Greenarcher707™ said:
You're right. it's all good though, i used MBRWIZ to take care of that minor setback. I can boot Windows 7 thru a USB drive now. I'm still on the fence about it, i have Vista Ultimate on my Shift right now. From your experience will Win 7 be drastically better?
Click to expand...
Click to collapse
It's like driving a race car compared to vista.

apoparis said:
Everythnig works fine for me untill.. I boot from usb go to "install now". And then ...
"A required CD/DVD drive device driver is missing.If you have a driver floppy disk,CD,DVD or USB flash drive please insert it now.
Note: If the windows installation media is in the CD/DVD drive, you can safely remove it for this step"
I go to browse and then " No device drivers were found.Make sure that the installation media contains the correct drivers, and then click OK".
I'm completly lost help..
Click to expand...
Click to collapse
Please, is there anybody who can help me resolve my problem? I tried lots of times by nothing works..I'm reading all these positive comments about win7 and I can't wait to have them on my shift.. I can see the usb, I browse there to the folder I have the drivers but can't install them.
Thank you in advance

This is for those who've encountered problems.
Start the whole process over again. I didn't make the guide clear enough when I first posted this thread. It's clearer now. The symantec drivers are probably fine, you're probably crashing because windows aero is still enabled, and it is crashing your shift whenever it tries to switch to high res mode. Disable aero.
As for apop, you need to install via the second option, not the first. I got the same error when I selected the first install option when I booted into the windows 7 installer. This method will completely remove vista as the main os and put it in another folder. As a precaution, I recommend backing up personal documents that are stored in any windows sub directory. *word documents and the likes.
Anything outside of your windows directory, or on the main hard drive itself should remain after the install, but I only did this process once with extra stuff on the drive (it stayed).
Back it up, and do a fresh install.
Caid.
444

Thanks for your anser Caid. I just don't have an external DVD.. Is it impossible to go through 1st way? I have read that some people managed to do it this way..

You mean via a usb flash drive? That's how I did it. Follow the steps for the usb flash drive method, but when you boot it on your shift and you have the option to do a custom or express install, do the custom install.
Caid

thaihugo said:
It's like driving a race car compared to vista.
Click to expand...
Click to collapse
wow, that got me convinced. installing windows 7 right now. gonna probably stay up late ha ha

Caid444 said:
You mean via a usb flash drive? That's how I did it. Follow the steps for the usb flash drive method, but when you boot it on your shift and you have the option to do a custom or express install, do the custom install.
Caid
Click to expand...
Click to collapse
Yes, I'm using a usb card reader and sd card. I don't have two options (custom/express). Just one "install now"..
P.S. Thanks for your interest in my case.

ok
After you select "install now" there'll be a license agreement. After that there'll be a choice between two install options. You need to choose the second one.
Caid.

Can someone explain to me how to set up a cellular internet connection through windows 7? I've got the sim card inside, the phone recognizes it, but I don't know how to get it working through win7, I used control center to enable modem, but still no luck. This is really annoying.
Caid.
444

SnapView Turn's and WM7 too ... the screen goes off
Hi, I completed the W7 installation successfully. I even got to conect SnapView with W7 this time. I say this time because with the previous Wm7 guide I wasn't able to do it.
Anyway, now my screen is blank for WM and W7. In fact I have to press the on switch to get the W7 screen back. Once I have W7 working I need to reset Snapview throught the Shift Control Centre to get it going. Finally Snapview / WM comes on. However it lasts on for a few minutes and then the screen is off again. W7 will last for a few minutes more and the same will happen. I then need to press the sliding switch again. The W7 screen will turn on back to normal (the OS doesn't actually turn off but just the screen); however, WM doesn't turn on (in this case it's the screen and WM itself). I then need to repeat the resetting process again.
I did do this:
"
Also, after this setup, the Snapvue side might turn off and not turn on again. In this case, reset under vista side using the HTC tools, and go to the power settings (long click or right click on the battery icon in the bottom right of your desktop). Disable all the "turn device off after x min" settings and make sure to click ok to make the changes effective"
I did it at W7. Am I missing something? Any hints from the experts? Needless to say, everything was working fine with Vista.
Thanks

Related

Easiest way ever to install win7 on shift

I had many difficulties to install windows 7 to my shift, maybe because of my USB stick. And then every guide was a little bit complicated - too many instructions, too many steps, too easy to make a mistake and then go back to the beginning..
Didn't want to buy an external dvd-drive either..
Anyway, all this before I found this article.
Check this out
Installing Windows 7 without using a DVD or USB via direct method - No USB stick required. No USB drive required
In this method we install Windows 7 on a clean partition like the normal DVD boot method. Only change is we don’t use a DVD drive in this guide. Please follow the below instructions carefully and don’t skip any steps to make things quickly!
1. Download the Windows 7 ISO files from Microsoft. I hope you have already downloaded one.
2. Download and install Virtual Clone Drive from http://www.slysoft.com/en/download.html
3. Firstly, go to the directory where you have saved Windows 7 ISO file. Right-click on the ISO file, select Open with and then select “Mount files with Virtual Clone Drive” to mount your ISO file.
4. Go back to My Computer (or Just Computer) and then double-click on the Virtual Clone Drive icon to start Windows 7 installation process.
Yes, you are installing Windows 7 without a DVD or USB drive!
5. Next, follow the normal Windows 7 installation procedure to finish the installation. Windows may restart during the install process. Worry not, everything will go fine.
From
http://www.intowindows.com/installing-windows-7-without-using-dvdusb-drive-method-2/
P.S Any good site to download NON-aero themes?
apoparis said:
P.S. Any good site to download free non-aero themes? Thanks in advance.
Click to expand...
Click to collapse
There already are some from microsoft availabale via the link in the personalize menu. Have you already downloaded those ?
Unfortunately those are aero themes, I'd like some NON-aero, to fit with both resolutions.
ok, now the short way to make a bootable USB Disk to install Vista/7
cmd
diskpart
list disk
select disk $ [where $ is the number of the USB Disk listed in the list disk command]
clean
create partition primary
select partition 1
active
format fs=ntfs quick label="InstallUSB"
assign
exit
exit
Copy the content of your Installation Disk on USB and boot from it, just simple as that
do this method install the new windwos over the existing windows, or on a new partition in HDD.
As far as I know, no version of windows allows installing of a new windows except from booting.
N_M_S said:
do this method install the new windwos over the existing windows, or on a new partition in HDD.
As far as I know, no version of windows allows installing of a new windows except from booting.
Click to expand...
Click to collapse
I just tried it out and it installs it over the existing running windows, doesn´t matter if it was downgraded to xp, or already upgraded to 7, it will install a new and fresh copy of Win 7 in your local drive, regardless of the existing vista recovery partion, which can be used in any time... (I hope to get ride of it once Win 7 final version comes out...)
When the installation is complete, a folder called "old windows" saves all the files from the preivous running operating system, bt since it´s over 10 GB, I suggest you erase it..
Win 7 is fantastic!! I have my shift now running both Internet Explorer 8 and Opera, Office Pro 2007, Skype, Live Messenger, Eset Smart Security 4, Adobe Reader, and more.... as smooth as butter
Great..............Shift on W7.
Please someone could tell me if the differences are big using W7 instead Vista.
So, it's a great solution to move Shift to run on W7, or not ?
I upgraded my hard drive then changed to windows 7 with a clean install. It is amazing how much better my shift runs now that it is on W7. It is really worth it to upgrade.
upgraded to windows 7 ultimate
Hi,
i upgraded to windows 7 ultimate and changed the drivers compitibility mode to windows vista service pack 1 and they all run smoothly but except the wifi and bluetooth, also the shag control doesn't run
would you please advise?
i am planning to buy the windows 7 upgrade
thanks for your help in advance
cadc82 said:
I just tried it out and it installs it over the existing running windows, doesn´t matter if it was downgraded to xp, or already upgraded to 7, it will install a new and fresh copy of Win 7 in your local drive, regardless of the existing vista recovery partion, which can be used in any time... (I hope to get ride of it once Win 7 final version comes out...)
When the installation is complete, a folder called "old windows" saves all the files from the preivous running operating system, bt since it´s over 10 GB, I suggest you erase it..
Win 7 is fantastic!! I have my shift now running both Internet Explorer 8 and Opera, Office Pro 2007, Skype, Live Messenger, Eset Smart Security 4, Adobe Reader, and more.... as smooth as butter
Click to expand...
Click to collapse
would you please help me in installing the drivers?
i have a problem with the VGA display driver (i can not increase the reslution), wifi and bluetooth.
hope to hear from you soon
Can someone pls give me the microsoft windows mobile 7 iso download link???...
I am still confused which iso file to download
abs_dear said:
Can someone pls give me the microsoft windows mobile 7 iso download link???...
I am still confused which iso file to download
Click to expand...
Click to collapse
Windows mobile 7?

Windows 7 & HTC Drivers Issue

Hi
I have tried the dummies guide concerning updating the HTC USB drivers but had a couple of issues:
1. If I press F8 during the boot process I get an abreviated version of the bois setup which has no selection for turning off digital signing of drivers. I have an ASUS motherboard so to enter the bois I press the DEL key. Whilst in the bios I can see no option for turning off the digital signing. The instructions in the thread simply don't work.
I have done some searching and found web pages that explain how to enter the command window, paste 2 or 3 lines of text to turn off digital signing and put W7 64 bit into a sort of test mode. I have done that and have "Test Mode Windows 7600" in the bottom right corner of my Desktop. I still can't install the HTC USB driver as it brings up an error due to being not signed.
Without installing the new driver I cant change my ROM. There must be others in the same boat having changed to Windows 7. Please help.
Ok a few things:
I'm on windows 7 x64 build 7600, I'm having NO problems, just connect your device in windows let it connect with active sync
Then de-connect your blacktsone, shut it down, and hold volume down button then press start up, it will now start in bootloader mode
Now re-connect and wait for it to get installed by your pc!
If you really DO need htc drivers
Go into your bios
Turn of any quick booting AND turn off full logog display
When windows is starting AFTER the bootscreen you'll get a screen with some sort of TABLE in it with all your hardware and all they're IRQ's
at THIS moment when you see this table press f8
Then you get a boot menu
and you can follow your guide with turning off the signed drivers etcetera!
Great Greet Giblet
wow dude, treat me like the idiot I am. Step by step please.
"Then de-connect your blacktsone" - i guess you mean take out the USB cable?
I wait for it to get re-installed but nothing happens whilst in bootloader and the word serial stays at the bottom of the screen
OMG
Oh my god, I am really frustrated becuase I managed to get it to work with your help but I don't know how. I must have tried everything 10 times without luck then all of a sudden it worked.
If only I knew what I was doing wrong I could pass it along to the next poor sap.
Thanks for your help.
H
Some options to get a new ROM on your device:
Alternative Option: Run ROM from storage card (this requires HSPL on your device)
- Connect your phone to your pc with the usb cable
- Choose Disk Drive option on your phone when presented with the choice.
- Extract the downloaded rar and if not called BLACIMG.nbh rename the romfile to that (ruusigned.nbh is commonly used so rename when so)
- Copy the BLACIMG.nbh to your phone's storage card via Windows Explorer where it should show up as an removable harddrive.
- Disconnect your phone from the pc once copy has finished.
- Shut down your phone.
- Press Volume Down (left top of phone) and keep it pressed while pressing the Start button (on top of phone) once.
- The bootloader (red,green,blue,white screen) will now start, it will detect the new rom file and ask you if you want to update your current one.
- Confirm and follow instructions on screen
Done.
As for your unsigned drivers i can offer some tips:
- Press F8 after you have seen all your hard drives recognized in the bios bootup screen but before you see the Windows Logo.
- F8 might be set as a bootselector menu by your motherboard manufacturer, if this gets in the way of trying the get to the F8 options from Windows you can disable it in your BIOS (to enter press del)
- If you have Windows 7 Ultimate you are entitled to XP-Mode which is basically a built in virtual machine of Windows XP within Windows 7, some people have been succesfull connection their phone to that XP installation and were able to update via it.
Hope this helps. together with the previous poster's comment you should come a long way, good luck.
Heefy said:
Oh my god, I am really frustrated becuase I managed to get it to work with your help but I don't know how. I must have tried everything 10 times without luck then all of a sudden it worked.
If only I knew what I was doing wrong I could pass it along to the next poor sap.
Thanks for your help.
H
Click to expand...
Click to collapse
Oh lol, guess you just managed, grats on that. for future you could try the alternative option i posted, works garanteed irregardless of operation system.
Solution found, thread closed
In future try posting such queries in the Dummies guide: updating HTC USB Sync Drivers thread. Thats what its there for

trouble with ADB

I've been following mrkite38's nice guide here:
http://forum.xda-developers.com/showpost.php?p=5096501&postcount=17
I understand it completely, and have done similiar operations before. However I cannot get my phone to popup in device manager in any form. I here the bell that tells you a device has been connected, but nothing ever shows up, no notification, nothing.
Any ideas? thanks guys
Is USB debugging enabled inside android?
mrkite38 said:
Is USB debugging enabled inside android?
Click to expand...
Click to collapse
Yes and also stay awake
I've never had any luck with ADB also. I'm running Win 7 64 bit. I've tried all types of things LOL
Reddog80p said:
I've never had any luck with ADB also. I'm running Win 7 64 bit. I've tried all types of things LOL
Click to expand...
Click to collapse
same - maybe it's win7 is the problem. I've had problems with it on winmo as well. I'll try my parents pc sometime (xp)
i cant get it to work right on vista either. never have.
does your device ever show up in device manager? I can't even do that...
berardi said:
does your device ever show up in device manager? I can't even do that...
Click to expand...
Click to collapse
I got it to work on win 7 64 bit. It was a pain, actually I only got it to work on my laptop and not my desktop both with win 7 64 bit.
So normally when you plug in the android phone, 2 things pop up in device manager as Android phone, however one of them always trys to load a driver of a disk drive (probably set up to transfer stuff) however whenever that device is enabled with the driver adb wont work. So what I had to do was, especially b/c win 7 is a bit odd for automatically installing any driver it want with out input from up I had to disable that.
Start run gpedit.msc
in there go to Admin Templates > system > Driver installation > Driver instillation restriction. Enable both "Allow admin to override device installation restriction policies" and "Prevent installation of devices not described by other policy settings"
Ok after doing that you want to get rid of the drivers it tried to put in, so in device manager uninstall them, also download and run usbdeview, and remove the HTC drivers from there too. Might have to restart?
Now the drivers i used for adb was from proxoid, there are 32 bit and 64-bit versions there for you and it seemed to work
So d/l that, plug you phone in and in device manager manually set the drivers, you know right click deceive, update drivers, let me choose, choose form list, have disk etc.
Now the only pain with this method is that when you plug in another device, you have to go to device manager and install the driver from there either by using windos update or manually. If you take off those policies we changed earlier, windows in its great wisdom will reinstall non-working drivers.
Like i said worked on 1 comp not the other.
Good luck.

[GUIDE]How to install Windows 7 retail via USB drive

Hey people. Think you have seen a thread like this before? Well, that's because you have. But THIS thread is different! For two reasons:
1-It's written in GOOD English. No offense folks, but spell checking is really not that hard.
and
2-It deals with EVERYTHING you need to do to get Windows 7 retail up and running on the Shift.
If you see something that needs to be changed/corrected/updated then please feel free to let me know!
HOW-TO INSTALL WINDOWS 7 RETAIL VIA USB ON THE HTC SHIFT X9000 SERIES
Now, before we begin, this guide assumes a few things:
1-that you are using a RETAIL or RTM copy of Windows 7. This guide WILL NOT work with beta or RC versions of Windows 7 OR versions that are N-lited, stripped or altered in anyway. You MUST be using a retail image, either made from a disc you own or from other sources. Please note that we at XDA do not support piracy and suggest that you buy a legal copy of Windows.
2-That you are using a GSM version of the Shift, IE the X9500 or X9501. While these instructions will work with the CDMA version of the Shift, I personally do not have one so I cannot confirm if/how the CDMA radio works using this installation method.
3-That your version of Windows 7 ISN'T Home Basic. While Home Basic will work, it doesn't support touchscreens. I personally installed Ultimate, as the requirements are the same no matter what version you use.
To install you will need:
1-A Shift(duh!)
2-A copy of Windows 7 RTM or a retail disc
3-A USB drive that is 4GB or greater, but no larger than 32GB for Windows
4-A USB drive(any size really) for the storage of HTC drivers for post installation
5-Some time on your hands
6-Either another PC with a CD drive or a USB CD drive
Now onto the good stuff!
1-Let's begin. Insert your Windows 7 DVD into your CD drive. If you are using an ISO image, skip to step 4.
2-Make a folder on your desktop called Windows 7.
3-Copy ALL the files from your Windows 7 DVD into the folder you just made. Be patient as this process will take some time, especially if you are doing this on your Shift.
4-While the files are copying(or after they are done, whatever) go ahead and insert your USB drive into a free port.
5-Open "My Computer" and locate your USB drive. Right click on it and select "Format". Click the menu which says-"File System" and select "NTFS" from the options. Then click Format and let it finish. It should take just a few moments.
6-Once your USB drive has been formatted, open a command prompt and type the following command:
BOOTSECT.EXE /NT60 H:
Where "H" is your the letter of your USB drive.
7-Your USB drive should now be ready to use!
8-Insert your USB drive into your Shift's USB port, press the power button and repeatedly press F10 as it starts to be brought to the Boot Menu and select your USB drive and hit enter.
9-Windows should begin loading setup information now. It should take around 5-ish minutes to get to the graphical part of the installer.
10-When you are presented with the graphical portion, select your country and whatnot, then a username and such, and when it asks you if you want to Upgrade or Custom install, select Custom.
11-You will now need to format your Shift's harddrive. Select the partition that is displayed and select "Format". PLEASE NOTE THAT THIS WILL DELETE WINDOWS VISTA FROM YOUR SHIFT. YOU CANNOT RECOVER ANYTHING THAT IS DELETED. Your recovery partition however is not touched in anyway, so if Windows 7 doesn't work for you, you can reinstall the stock Vista from the recovery partition.
12-Once it is finished formatting, select that partition to install to and continue on with the installation.
13-When it finishes you SHOULD be presented with the Windows 7 desktop. And that's about it. No WiFi. No sound. Pretty much nothing. Now, you DID download the drivers and put them on another USB drive right? Right? GOOD!
14-Insert your USB drive and let Windows install it. Now, ALL of the drivers that we are about to install MUST be installed in the same fashion as I am about to describe. Right click each one and select properties. Click the compatability tab and select the option to have the installer run in compatibility mode for Windows Vista. This MUST be done or the drivers WILL NOT install.
15-Once you have done that, go ahead and install the following drivers. Don't worry about the other ones for right now. Install them IN THIS ORDER OR ELSE THEY WILL NOT WORK:
1-Vista Intel Chipset driver
2-Vista ECD
3-HTC Touchscreen
4-HTC ShagCTRL
5-Marvel SDIO WiFi
After you have installed those 4 drivers, restart your Shift.
16-Once your Shift has restarted, go ahead and press the Comm. Manager button. Shift Control Center should pop-up and your WiFi card should begin installing. If it doesn't, click on the button for WiFi and make it say "ON" and it should then start installing.
17-Once your WiFi card is succesfully installed, click Start->Windows Update.
18-Click on "Check for updates" on the left hand side and let Windows do it's thing. It should find 60-ish updates for download, around 6 of which are drivers for your various devices such as sound and Bluetooth and the like. Don't worry, your screen resolution WILL get better!
19-After Windows has installed updates..you are pretty much done! EVERYTHING should now be working in Windows 7!
20-ENJOY 3(!) HOURS OF STOCK BATTERY LIFE ON YOUR SHIFT RUNNING WINDOWS 7!
That's about it folks. I worked for 2 days straight to devise this method for installing Windows 7 on my Shift, and it couldn't work any better. If you find a mistake, or have a suggestion please let me know!
Great!
I´ll move it to [REF] Guides | Tutorials | FAQs | Stickies | Read here before posting thread located here:
http://forum.xda-developers.com/showthread.php?t=772017
it went fine till step 16, the Comm. Manager button doesnt open anything, however the wifi works ok.
please tell me how does the Comm. Manager work
and now it just wont boot, it gives a blue screen and tells me theres an error, and automatically shut down.
What error does it give you? Are you ABSOLUTELY SURE that you are using a GENUINE untouched OEM RTM copy? This process ONLY WORKS with the legal untouched OEM RTM. If you are trying this with some kinda downloaded ISO it WILL fail and bluescreen on you. It must be build 7600 or higher. Comm. Manager just works for me under 7 following these instructions.
Hi! Thank you for the guide, everything is fine! The only thing doesn't work is the touchscreen. I've installed the touchscreen drivers in compatibility mode Windows Vista SP2 and as Administrator. Do you have any idea?
EDIT: Solved! I reinstalled the driver for the 8th time and it worked!

[GUIDE] Installing Windows 10 Technical Preview on the HTC Shift

Windows 10 Windows Technical Preview is available for more than a week. Since i have an extra old 40gb hdd for the shift, i decided to give it a try, and i can say that it works perfectly well. Everything works including touchscreen, wifi, bluetooth, modem, etc.
However installing the drivers may be a little tricky. Here are the steps:
1. Download Windows Technical Preview from microsoft website (download the x86 version)
2. Extract the .iso file to a usb stick (i used power iso to do that)
3. Plug the stick to the shift and boot from it
4. Follow on screen instruction to install windows
5. When done copy the drivers for the shift (you have the download link bellow the video ) to a stick
6. First install "VistaECDrvV" in compatibility with windows vista (right click on the file - properties - compatibilty tab- run this program in compatibility mode for: - select windows vista (service pack 2) !! do that for all of the drivers) - restart later
7. Install "TouchScreen"
After installing touch screen driver the touch should work - give a restart
8. Install "Synaptics MicroPad" - restart later
9. Install "shagctrl" ignore the Microsoft .NET Framework missing error - restart later
10. Install "Marvell Wifi driver" - restart later
11. Press the Win+R key combination and type msconfig in the run box and hit enter - switch over to the boot tab, and click on the Safe Boot check box - select minimal -apply -ok - restart
13. With windows booted in safe mode navigate to C:\Windows\System32\drivers right click on "sdbus.sys" -> properties -> security -> advanced -> owner TrustedInstaller click on change -> in the field labelled "enter the object name" type your username -> ok -> apply -> ok -> now back on security tab edit permissions -> click on users -> check all boxes from "permissions for users" tab on allow -> apply -> yes -> ok. Now delete "sdbus.sys"
14. Copy the "sdbus.sys" from the archive that i attached here to C:\Windows\System32\drivers
15. Press the Win+R key combination againg and type msconfig in the run box and hit enter - switch over to the boot tab, and unthick the Safe Boot check box - apply -ok - restart
16. You should have wifi working now - If you cannot find any wifi networks, as it was in my case, go to device manager - right click on the "Marvell sd8686 Wireless LAN SDIO Adapter" (the one without the exclamation mark if you have two) - properties - advanced - from the property box select 802.11D support - on the value box value box select enable. Your wifi should work ok now.
17. Install the "sherry driver 1.3" for the best performance of the video card.
18. That's it! enjoy
What i like most about windows 10 is that it have a "card view" of the running apps just like maemo 5 on noka n900, or the blackberry 10 os. Overall it runs a little better than windows 7 and similar with windows 8.1.
Maybe i will install it as a replacement for windows 8.1 update 1 on the main 120 gb hdd
Here is a small video to see how it runs:
Download HTC X9500 DRIVERS
ryu1 said:
Windows 10 Windows Technical Preview is available for more than a week. Since i have an extra old 40gb hdd for the shift, i decided to give it a try, and i can say that it works perfectly well. Everything works including touchscreen, wifi, bluetooth, modem, etc.
However installing the drivers may be a little tricky. Here are the steps:
1. Download Windows Technical Preview from microsoft website (download the x86 version)
2. Extract the .iso file to a usb stick (i used power iso to do that)
3. Plug the stick to the shift and boot from it
4. Follow on screen instruction to install windows
5. When done copy the drivers for the shift (you can find them on this forum) to a stick
6. First install "VistaECDrvV" in compatibility with windows vista (right click on the file - properties - compatibilty tab- run this program in compatibility mode for: - select windows vista (service pack 2) !! do that for all of the drivers) - restart later
7. Install "TouchScreen"
After installing touch screen driver the touch should work - give a restart
8. Install "Synaptics MicroPad" - restart later
9. Install "shagctrl" ignore the Microsoft .NET Framework missing error - restart later
10. Install "Marvell Wifi driver" - restart later
11. Press the Win+R key combination and type msconfig in the run box and hit enter - switch over to the boot tab, and click on the Safe Boot check box - select minimal -apply -ok - restart
13. With windows booted in safe mode navigate to C:\Windows\System32\drivers and delete "sdbus.sys" and "dumpsd.sys"
14. Press the Win+R key combination againg and type msconfig in the run box and hit enter - switch over to the boot tab, and unthick the Safe Boot check box - apply -ok - restart
15. When booted in normal mode copy the files from the "wififix" archive, that i attached to C:\Windows\System32\drivers and restart
16. You should have wifi working now - If you cannot find any wifi networks, as it was in my case, go to device manager - right click on the "Marvell sd8686 Wireless LAN SDIO Adapter" (the one without the exclamation mark if you have two) - properties - advanced - from the property box select 802.11D support - on the value box value box select enable. Your wifi should work ok now.
17. Install the "sherry driver 1.3" for the best performance of the video card. Search it on google.
18. That's it! enjoy
What i like most about windows 10 is that it have a "card view" of the running apps just like maemo 5 on noka n900, or the blackberry 10 os. Overall it runs a little better than windows 7 and similar with windows 8.1.
Maybe i will install it as a replacement for windows 8.1 update 1 on the main 120 gb hdd
Here is a small video to see how it runs:
Click to expand...
Click to collapse
Thanks alot, I am going to install it now
http://www.mediafire.com/download/c9g6a23223zr3sk/sherry1.3.2betaGMEGSE.rar
Excellent how-to. Clear and precise.
For those who want to perform it: taking a look at ryu1's comment in Post#14 is crucial!
You bring shift to future.
Also an interesting Video- as i see you've only 1GB RAM installed, and nevertheless your Shift runs pretty fast-
faster than mine with 2GB and Win7U.
Network connection, connection to SnapVue... i'm really amazed.
How long does it take to boot, and what about GPS?
Think i'll create a new partition on my 128GB SSD and run Win10 from there.
How large do you think should it be?
B-44 said:
Excellent how-to. Clear and precise.
You bring shift to future.
Also an interesting Video- as i see you've only 1GB RAM installed, and nevertheless your Shift runs pretty fast-
faster than mine with 2GB and Win7U.
Network connection, connection to SnapVue... i'm really amazed.
How long does it take to boot, and what about GPS?
Think i'll create a new partition on my 128GB SSD and run Win10 from there.
How large do you think should it be?
Click to expand...
Click to collapse
Well, i'm sure gps work ok (at least on the windows mobile side) but didn't tested on the windows 10 side.
For booting, i'm sure it take less than 1 minute, but don't know the exact time.
If you want to make a partition for win10, that should be at least 10 gb.
It would be really nice to see how it will run on your shift with 2gb of ram.
Please post the result if you install it
Made 20GB... had been frequently suggested for win8
Now taking a look if I've got a spare usb stick.
Maybe I'm missing something here. On my X9500 I can't get by the error about the 800 MHz processor. Maybe you are on a different model?
Same thing occured with win8 if i recall right... early releases worked fine, and later ones also came up with this problem. (It may have been with BenQ MID S6 instead Shift, I'll try to find out.)
Don't know if there had been some workaround.
As MS is continuously working on it, it may depend on the releases' date.
Mine dates october 20th, but i won't be able to test until next weekend.
If ryu1 doesn't have another idea, it may be useful to share the release he uses.
The processor should always be the same.
edit: Post#86
http://forum.xda-developers.com/showthread.php?t=1264742&page=9
What error are you talking about? i installed windows 8, then 8.1 and now 10 but never got any error about cpu.
Are you sure you didn't download the 64 bit version?
Win 10 Technical Preview lists as a requirement:
Processor: 1 gigahertz (GHz) or faster
Error complained about lower specification.
It was the 32-bit version.
"error" may be the wrong word.
The problem had been discussed in the thread i have linked above.
Again: it may be interesting to know the date of release.
ryu1 said:
What error are you talking about? i installed windows 8, then 8.1 and now 10 but never got any error about cpu.
Are you sure you didn't download the 64 bit version?
Click to expand...
Click to collapse
Maybe i've got it...
in your how-to you say "Plug the stick to the Shift and boot from it".
You mean plug it in, start your shift, enter boot options and select usb stick to boot from, right?
I had prepared my usb stick with powerISO, plugged it in, opened my stick in devicemanager and doubleclicked "Install".
And ran into "your device won't be able to run Win10 because of less than 1GHz".
Maybe this was my mistake, and i won't have this problem when booting from stick.
Will report asap.
That's it..
Just do what daddy told us
(And DON'T use windows installer.)
I haven't finished installation completely,
but right now i must say speed is amazing!
As some drivers are automatically installed to volume "C" i think i'll switch the names of C and X
(the partition i'm installing to), reinstall all drivers and then switch back.
edit: obsolete, win has done it by itself
Sorry for the delay, but i am very bussy these days. Anyway the installation mus be done by booting from usb stick, not via installer.
I have allready installed windows 10 on the main hdd instead of windows 8.1. There are a few things i forgot to mention on the first post, when booting into safe mode to delete the "dumpsd" and "sdbus" files you'll need permission to delete them. Just follow this instructions to change the permission: http://www.askvg.com/guide-how-to-take-ownership-permission-of-a-file-or-folder-manually-in-windows/
That's what i just was about to ask you, as i am stuck at this point...
Will try later and report
Tomorrow.
edit: Think you should for your own sake update your initial post, concerning boot process and rightsmanagement.
Further visitors won't follow the whole thread and'll bomb you with questions.
B-44 said:
"error" may be the wrong word.
The problem had been discussed in the thread i have linked above.
Again: it may be interesting to know the date of release.
Click to expand...
Click to collapse
Oh, by error I meant I received an error message when trying to do the install the way I had tried it. I will read the new information posted here, thanks all.
Finished installation yesterday, everything was fine, quick'n'clean when suddenly wifi stopped working.
Marvell shows error code 10 and winupdate seems to have installed a different adapter.
SD adapter same error.
Had a similar experience when i installed win7, but there i already had a restore point to return to,
and since then everything was fine.
Will make a clean reinstallation, and after adding the wififix disable wifi to avoid possible system updates
and create a basic restore point i can return to each time winupdate kills something.
Preview build 9879
Anyone managed to get the latest build to work. Mine gives a message that my display resolution is too low and stops the upgrade.
Shame really as this works very well on the Shift, and with rumours that win 10 could be free it would have been a good o/s for this computer.
Please post code 0f builtversion.
Build 9860

Categories

Resources