Is there a case without the hole for the camera? My job doesn’t let me have a cell phone with a camera and it would be great if I could find a case that covers the camera.
Thanks,
ZK
Did you actually remove the camera? If so, how does WP7 handle the camera missing? Is the chrome bezel around the camera removable?
I have the same issue you have, my workplace is strictly no cameras but they will allow a phone with the camera removed.
Isnt there a sticker cover you can get on ebay?
Related
I'd like to say Thank You to everyone in this forum and providing such a great site for us. I am very admire all yours talent that I wish I have, but I don't. I did I a little mod to my Tilt camera lens and it came out good and I'd like to share it with you all. This mod require no drilling to original lens and look oem.
1. A piece of Micro Slice Glass. 20 cents
(used for microscope, you can get it from science store)
http://www.flickr.com/photos/[email protected]/2914039158/
2. Knife sharpening stone, fine gain.
3. Glass cutting tool $6
http://www.flickr.com/photos/[email protected]/2914039484/
4. Qtip
5. Double side tape
Instruction:Sorry I don't know how to attach pictures into my post. Have to link it to Flickr. Hope you don't mind.
-To remove the lens, use a Qtip & push the lens out from the back side of the cover, use your figure nail to lift the lens out from the chrome frame.
http://www.flickr.com/photos/[email protected]/2913195413/in/photostream/
http://www.flickr.com/photos/[email protected]/2914041602/in/photostream/
-Use the lens to mark the size onto the Micro Slice Glass and cutting it with the glass cutting tools, you may need to try a few time to have a straight cut. http://www.flickr.com/photos/[email protected]/2914039158/
http://www.flickr.com/photos/[email protected]/2914039484/
-Now you have the piece cut out, here the fun part. use a sharpening stone and work near the sink cause you need to wet the stone during the sanding.
while sanding the new lens, use the original lens to check the shape. I made my a bit bigger then the original so it can be fit in tight without using any glue. Double side tape used just for insurance purposes.
http://www.flickr.com/photos/[email protected]/2914080332/
-Here the final product.
http://www.flickr.com/photos/[email protected]/2914250782/
-That's it folks, this is the best and the cheapest and the oem look camera lens mod ever. Here some shots I took before and after. Let me know what you think. Pictures are in order, original lens->Moded Lens->no cover.
1.http://www.flickr.com/photos/[email protected]/2914040902/
2.http://www.flickr.com/photos/[email protected]/2913194597/
3.http://www.flickr.com/photos/[email protected]/2914040044/
I will take some picture tomorrow for you to see. Time to sleep.
Those before and after pictures just show what a Mickey Mouse lens cover HTC has provided us with. How about a petition for a new back cover with a glass lens cover?
Top mod, gonna do this one.
BS...
Thanks for the heads up. Amazing how something so simple can improve the clarity of the camera so much.
What is a qtip?
Rob
rfarnell said:
Thanks for the heads up. Amazing how something so simple can improve the clarity of the camera so much.
What is a qtip?
Rob
Click to expand...
Click to collapse
The generic name would be a cotton swab.
Without cover is still better, and having done the mod many months ago, the dust problem is overblown.
Surur
Srart-up?
rfarnell said:
Thanks for the heads up. Amazing how something so simple can improve the clarity of the camera so much.
What is a qtip?
Rob
Click to expand...
Click to collapse
I don't know how many kaisers are out in the market but a manufacturer in the far-east (due to cost) can make such back cover with integrated fixed lens in the cost of ~$0.10 (go for worst case 1$) each and I'm sure most of us are willing to pay... lets say $15 each ? so here is a win-win opportunity waiting for an entrepreneur.
I did a similar yet cheaper fix.
Pop out the stock lens.
Cut some plastic (used the package some RAM for my pc came in)
Use the double sided tape and place it there. It's not that noticable but the picture quality improves a great amount.
Great mod, just took my back cover off and the picture is much better. I'm going to try just removing the cover altogether.
Lol, this is so much nicer than my ghetto fix! I had just popped out the plastic lens cover (and succeeded in breaking the little chrome-painted piece in the process, of course) and put a little piece of extra screen protector over the actual lens to protect it from the dust and what not.
Gotta' try this!
my lil camera lens cracked so i removed it and it has been off for over a month. i dont really have issues with debris getting under the battery cover. besides, its not hard to remove the back and clean it with my shirt and put it back on
nice, I will have to try this
You really can notice the difference. I just quickly take the back cover off, take a photo and then put it back on. I really notice the difference now. Thanks heaps!!!!
Thanks for the info... from now on, when I want to take a picture, I'll remove the back cover
I was thinking of doing this mod but using glass designed for optics instead of standard glass. A quick web search found http://www.astraproducts.com/i_ptsheet.asp. Are there any photography experts out there who know if this type of glass work any better than standard glass?
Also, if someone (possibly myself) were to bulk purchase pieces of optical glass "pre-machined" to fit as a replacement to the tilt, would there be much interest in purchasing these? I suppose it would all depend on cost and I have no idea what the cost would be, but maybe worth looking into.
This is just my opinion, but I see no point in going through the trouble of modding a phone that was never really meant to be used primarily as a camera.
I think this makes even less sense when you take in to account the fact that it performs really bad in certain conditions.
mata_mosca said:
This is just my opinion, but I see no point in going through the trouble of modding a phone that was never really meant to be used primarily as a camera.
I think this makes even less sense when you take in to account the fact that it performs really bad in certain conditions.
Click to expand...
Click to collapse
My reason for the mod is because the lense on my back cover is cracked right down the middle so the camera hardly works at all. Replacement covers run $50-$60 so I'm looking for a less expensive fix. I don't really want to remove the lense entirely because of allowing dust into the case and also the actual camera lense would be exposed and liable to scratch.
Does the camera touch the surface? Is the camera and lens cover recessed behind the battery cover?
I want to use the phone caseless, but there's no way I'm gonna let my camera lens get scratched.
Yes if you are using the stock cover, no if you are using the included flip cover.
EarlZ said:
Yes if you are using the stock cover, no if you are using the included flip cover.
Click to expand...
Click to collapse
The flip cover isn't always included with the Note (mine wasn't), but is an absolute must in my opinion! I hadn't even noticed that there was a recess on the flip cover, but not on the original back.
Regards,
Dave
Must be a regional thing, in my place its packaged by samsung as part of the purchase.
Well that sucks. Why the heck would Samsung do that? It's not gonna make me buy their flip cover or anything.
Yumunum said:
Well that sucks. Why the heck would Samsung do that? It's not gonna make me buy their flip cover or anything.
Click to expand...
Click to collapse
The back for the flip cover is necessarily thicker than the original back cover to allow for the "flip" to connect to it, which is why the camera is recessed whilst in it.
Regards,
Dave
foxmeister said:
The back for the flip cover is necessarily thicker than the original back cover to allow for the "flip" to connect to it, which is why the camera is recessed whilst in it.
Regards,
Dave
Click to expand...
Click to collapse
What confuses me is why Samsung put the camera lens higher than the original back cover in the first place. Could they have not put a lip just around the camera module? *sigh*
Yumunum said:
What confuses me is why Samsung put the camera lens higher than the original back cover in the first place. Could they have not put a lip just around the camera module? *sigh*
Click to expand...
Click to collapse
there is a physical limitation to what they can and cant do. if you want the camera recessed, you would need to increase the thickness of the phone. the slimness of the phone is one of the reasons why the phone still fits in most pockets despite its large screen.
by launching the flip cover and the device as separate items, they can still claim the device is slim, and still have the option of a recessed camera.
putting a lip around the camera model increases the device's thickness. cant really recess the camera into the case anymore due to the physical size of the camera unit and the amoled display. since the camera unit in our device partially behind the screen, not too much they can do. whereas with the iphone, the camera is in a corner which is not directly behind the screen, giving them a bit more room to play with.
samsung arent miracle workers. even they can only pack in so much.
Yumunum said:
Well that sucks. Why the heck would Samsung do that? It's not gonna make me buy their flip cover or anything.
Click to expand...
Click to collapse
The phone came with the stock cover. Flip cover was included in a separate package for free though. You should see me trying to install it over the stock one. Happy days
My Z1 camera lens cover seems to have a lot of scratches, his is very bad effect on the quality of the captured images, is anyone have this problem before, can this cover repaced.
nyongrand said:
My Z1 camera lens cover seems to have a lot of scratches, his is very bad effect on the quality of the captured images, is anyone have this problem before, can this cover repaced.
Click to expand...
Click to collapse
I am not aware of anyone running into this issue before. If you set it on a rough surface or a surface with granules of sand, then that could definitely be the culprit. As far as replacing the lens goes, there is currently no way to get a hold of a replacement lens as far as I know.
If you mean the inside phone part then you'll have to replace the entire camera part. If you mean just the part that you can touch with your finger then you'll need to replace the back glass.
I'm having the same issue, there are some spots on top of the lenses on my phone that won't go away and *all* my photos are have the white color over exposed plus focusing is never sharp enough like other phones, I bought the phone the way it is now and I'm going to replace the back glass to see if it helps.
I have a dent in the camera lens (or it's cover), the one on the outside. I've been googling for ages and can't find one anywhere. I don't want to buy a new camera just for the lens (there a vid on youtube about the camera lens for SP, so i know it's possible to get it seperately). It's a small ddent, but it makes my camera so that it can't focus at all... The camera is one of the reasons I bought it, so I really want to fix the lens. Or should I just opt for the Oneplus one or the Xiaomi Mi4?
Firstly, can any of you find the lens anywhere online?
you have to search local mobile phone markets too. possibly u will find ( not necessarily of sony but some other brand that may fit ) coz sony does not provide such parts like lens cover or flap covers etc ( as far as India is concerned :laugh: dont know about rest countries )
If phone is in warranty then replacement is possible
Alright, I was an idiot and managed to crack my glass camera lens cover. I purchased this : http://www.amazon.com/gp/product/B00RKFAZ5I/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 and did the replacement, but my pictures appear sort of "hazy" or "foggy" for lack of a better term. I can still get it to focus really well, but the pictures don't pop like they used to.
The only thing I did while replacing that could have caused problems was using compressed air while the old cover was off to ensure none of the shattered glass was left in the actual camera lens mechanism. I made sure to hold the can at an angle so that none of the liquid came out, but i did notice the lens mechanism moving around (almost like a hockey puck) as the air interacted with it. I assumed this sort of free floating lens design had something to do with the optical image stabilization, so it didn't seem like a big deal. I put the new cover on with clean hands and thought everything was fine until I started taking pictures again.
Has anyone replaced the camera lens cover and experienced a similar issue? I've ordered another one to take another shot at it, and I'm actually going to take some test pictures while the cover is removed just to see if I did actually damage the lens itself...
I have the jump protection, but would rather fix it myself than pay 175 for a refurb that I'm going to replace in 4 months anyways.
Why not replace the whole back camera?
I dont know how easy is to remove the lens cover but check if pictures taken without cover are foggy or not. If foggy then camera lens is dirty, if sharp - camera lens cover is a problem.
Sent from my SM-N910T using XDA Free mobile app
My guess is it got moisture behind the lense, or the lense was dirty.
When they create that hardware it is sealed in 0% humidity. If it was even a rainy day when you installed the lense, it could have caused it to fog up.
Sent from my SM-N910T using XDA Free mobile app
What I did was pull mine back and clean it with some alcohol and a q-tip
Is there a part number for that?
Check out this item I found on eBay: http://pages.ebay.com/link/?nav=item.view&id=371237781680&alt=web
10-K said:
Check out this item I found on eBay: http://pages.ebay.com/link/?nav=item.view&id=371237781680&alt=web
Click to expand...
Click to collapse
Thanks, might give that a shot if it doesn't clear up with the next lens cover.
Did you peel the plastics on both sides of the lens cover? Also check if it's actually focusing. Maybe slap the phone and see if it refocuses. Afterall there are moving parts in there.
Is there a genuine saphire lens cover to buy anywhere? I to used the cheap replacement cover and my pictures are blurry and bad in bright light. My camera itself should be fine though.