Database Develop

ext partitioning cwm

when we partition our sd card to ext in cwm recovery is that ext2 or 3/4? if i use gparted insted of recovery to partition to ext4 is that ok?

Cwm does an ext3 partition, if ur using DTa2sd..it can be converted to ext4 by
su
a2sd convert-ext4

kandros said:
when we partition our sd card to ext in cwm recovery is that ext2 or 3/4? if i use gparted insted of recovery to partition to ext4 is that ok?
Click to expand...
Click to collapse
Yes, it is perfectly fine if you make one with gparted or mini tools... make sure you run this command in terminal before flashing a2sd...
mount | grep sd-ext

thanks to both
what mount | grep sd-ext exactly do?
aso my gparted already see my sdext partition ext4 if i partitioned it from recovery is that possible or an error?

That command checks if there exists an sd ext partition.
I don't know abt gparted but cwm formats the card and partitions it so it should not be a prob

I used minitools for partitioning
u can go for ext4 no harm in tht
if ur using mini tool make sure u keep all partitions as primary
also ext2/3/4 wont b detected on windows so dont panic if u dont see the partitions once done they r thr meant for ur phone nt windows

Without a2sd what is the exact command to convert partition to ext4 ? It can be very useful
..
Inviato dal mio GT-S5570 usando Tapatalk

roofrider said:
Cwm does an ext3 partition, if it using DTa2sd..it can be converted to ext4 by
su
a2sd convert-ext4
Click to expand...
Click to collapse
yeah, but "problem" is after a restore. If we convert partition in ext4 after restore, all data already in partition remain on ext3, only new data will be on ext4.
So it will be good that cwm could format always sdext in ext4

Okay, a question from me...
I have a galaxy fit s5670, running a custom rom that came with darktremor a2sd pre-installed...
I created a partition of 1024mb on my 16gb card, and have enabled swap...but the apps that I install are still going in the phone memory...
Can you please help me out???
Our devices are SIMILAR...
Sent from my GT-S5670 using XDA App

a.cid said:
Okay, a question from me...
I have a galaxy fit s5670, running a custom rom that came with darktremor a2sd pre-installed...
I created a partition of 1024mb on my 16gb card, and have enabled swap...but the apps that I install are still going in the phone memory...
Can you please help me out???
Our devices are SIMILAR...
Sent from my GT-S5670 using XDA App
Click to expand...
Click to collapse
install a2sdgui

That is also pre-installed...after that???
And thank you for replying...
Sent from my GT-S5670 using XDA App

I have installed link2sd, which seems to be working fine...
When it asked me what partition type did I have, ext3 and 4 gave me a 'partition not found' error...
Ext2 is working fine...
Sent from my GT-S5670 using XDA App

a.cid said:
Okay, a question from me...
I have a galaxy fit s5670, running a custom rom that came with darktremor a2sd pre-installed...
I created a partition of 1024mb on my 16gb card, and have enabled swap...but the apps that I install are still going in the phone memory...
Can you please help me out???
Our devices are SIMILAR...
Sent from my GT-S5670 using XDA App
Click to expand...
Click to collapse
I believe that you are taking about the cache that will use your internal memory even if you have a2sd enabled. THough it is not recommended to do so unless needed (i.e. your memory is very low) you can move dalvik cache to sd-ext from APP2SDGUI app or though this simple command
su
a2sd cachesd
It will move dalvik cache to sd-ext.
---------- Post added at 06:18 PM ---------- Previous post was at 06:12 PM ----------
a.cid said:
I have installed link2sd, which seems to be working fine...
When it asked me what partition type did I have, ext3 and 4 gave me a 'partition not found' error...
Ext2 is working fine...
Sent from my GT-S5670 using XDA App
Click to expand...
Click to collapse
Don't try anything eles.... Just install darktremor as said here http://yagyagaire.blogspot.com/2011/09/how-to-partition-sd-card-and-install.html
If possible format your sd-ext before installing darktermor app2sd. THen all you need to so is move dalvik to sd-ext as said above. And your internal memory will be totally empty. You can explorer /sd-ext/ folder using root explorer to see if a2sd is working properly.

After using link2sd for a day, I find that it is working, and it even allows u to specify which apps to move, and what all to move...
I did partition before using a2sd, and I understand the thing about the dalvik cache (moving which would make my device slower)...
Anyways, thanks for replying...
Sent from my GT-S5670 using XDA App

How to make ext partion mount

hi i recently got back to my stock rom GT-S5830_INU_S5830DDKQ8
my problem is that when i setup Link2sd an error message is displayed "mount script not created"
but when i use custom rom i an create the link2sd mount script
i have tried formatting my phone and the firmware also still faceing the same isse
can any1 help
i have just rooted my phone..

U have to partite your sd card before u run Link2Sd because link2sd doesnt create it,recommnd you to use Minitool Partition Wizard,very easy to use.
Sent from GALAXY Ace StockLite v7.1

Blackstard said:
U have to partite your sd card before u run Link2Sd because link2sd doesnt create it,recommnd you to use Minitool Partition Wizard,very easy to use.
Sent from GALAXY Ace StockLite v7.1
Click to expand...
Click to collapse
i have 6 gb of fat32 and rest ext 4 partion
i made it through mini tool it works fine if i install custom rom but on stock rom it doesnt mount i think i ned some kind of script
can u guide me please

imranaryan said:
i have 6 gb of fat32 and rest ext 4 partion
i made it through mini tool it works fine if i install custom rom but on stock rom it doesnt mount i think i ned some kind of script
can u guide me please
Click to expand...
Click to collapse
Mmm,really i dont know much about partition,check this tutorial;
http://forum.xda-developers.com/showthread.php?p=22075746
Sent from GALAXY Ace StockLite v7.1

imranaryan said:
i have 6 gb of fat32 and rest ext 4 partion
i made it through mini tool it works fine if i install custom rom but on stock rom it doesnt mount i think i ned some kind of script
can u guide me please
Click to expand...
Click to collapse
Try creating mount script in different format with link2sd. Ext2, ext3, fat32 one will work.

dxppxd said:
Try creating mount script in different format with link2sd. Ext2, ext3, fat32 one will work.
Click to expand...
Click to collapse
dide i tried all should i try installing DTapp2sd or flash cf-root

Did u assign your ext partition as 'primary' ?
Sent from my SK17i using xda app-developers app

imranaryan said:
dide i tried all should i try installing DTapp2sd or flash cf-root
Click to expand...
Click to collapse
Try manually editing the mount script.
I don't really remember where the link2sd mount script was created for stock roms without /init.d i think it was in a file called init.d at the root of the phone or system/ or system/etc.
Look it up, open it as text, locate the link2sd mount script.
The part where it says 'mount -t ext3 -o rw /dev/block' change 'ext3' to 'ext4' in all lines required, reboot. Check link2sd again to see if it worked.
Otherwise, enable the system/etc/init.d address by flashing cf-root or flash a custom rom.

imranaryan said:
hi i recently got back to my stock rom GT-S5830_INU_S5830DDKQ8
my problem is that when i setup Link2sd an error message is displayed "mount script not created"
but when i use custom rom i an create the link2sd mount script
i have tried formatting my phone and the firmware also still faceing the same isse
can any1 help
i have just rooted my phone..
Click to expand...
Click to collapse
format ur 2nd partition to fat16 or fat32 using gparted in linux..
stock rom kernel wont support ext formats..
i'm using fat32 second partition in stock rom for using link2sd..
Sent using xda premium

Are you sure about having a kernel with init.d support? Without it, script can't be mounted.
Sent from my GT-S5830 using xda app-developers app

abhibnl said:
Are you sure about having a kernel with init.d support? Without it, script can't be mounted.
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
Link2sd doesn't need /init.d, only root and partitioned sd to work.

[Q] How partitions could help me?

Hello all
What is the idea of the partitions and how do they help me?
Thanks

What?
Sent from my E15i using xda premium

ElmirBuljubasic said:
What?
Sent from my E15i using xda premium
Click to expand...
Click to collapse
I know what is partition, but what is the idea, if i make ext4 artiotion on my sd card for example, for what I coud use it.

U can use for installing apps
Sent from my E15i using Tapatalk 2

bandarigoda123 said:
U can use for installing apps
Sent from my E15i using Tapatalk 2
Click to expand...
Click to collapse
You mean this is some kind of external storage, which the system recognize like internal memory.

xxTTcc said:
You mean this is some kind of external storage, which the system recognize like internal memory.
Click to expand...
Click to collapse
something like that :silly:

Ups... I've partitioned the sd-card without making a backup (tipical for me) and its all gone.

xxTTcc said:
Ups... I've partitioned the sd-card without making a backup (tipical for me) and its all gone.
Click to expand...
Click to collapse
sorry forgot to warn you :silly:

fotak-x said:
sorry forgot to warn you :silly:
Click to expand...
Click to collapse
No problem, now the ROM is flying :silly: can't hold it

What I must do, to install apps in sd-ext i've created? I am with miniCM10 rom.

xxTTcc said:
What I must do, to install apps in sd-ext i've created? I am with miniCM10 rom.
Click to expand...
Click to collapse
select install point in settings

Ok, I've created the partitions in CWM, flashed my rom again with factory reset, vie Settings -> Performance -> Memory managmet -> A2SD I set ti to A2SD, gave the system root access, rebooted the phone and the sd-ext partiton is not mounted. I've installed the link2sd app, and choose ext3 partition, which is set by CWM, and the app say
Can't mount: Invalid Argument
Your system maybe not supporting ext3 or somthing like that.
So how to mount the damn sd-ext partitions.
P.S. I've tried via terminla with df | grep sdext3 no luck.

xxTTcc said:
Ok, I've created the partitions in CWM, flashed my rom again with factory reset, vie Settings -> Performance -> Memory managmet -> A2SD I set ti to A2SD, gave the system root access, rebooted the phone and the sd-ext partiton is not mounted. I've installed the link2sd app, and choose ext3 partition, which is set by CWM, and the app say
Can't mount: Invalid Argument
Your system maybe not supporting ext3 or somthing like that.
So how to mount the damn sd-ext partitions.
P.S. I've tried via terminla with df | grep sdext3 no luck.
Click to expand...
Click to collapse
you are on minicm 4.0.1 and jb 2 kernel???

fotak-x said:
you are on minicm 4.0.1 and jb 2 kernel???
Click to expand...
Click to collapse
Yes, that's my configuration

xxTTcc said:
Yes, that's my configuration
Click to expand...
Click to collapse
maybe you should try some other rom if you want a2sd like miniCM 4.0 or ICZ

fotak-x said:
maybe you should try some other rom if you want a2sd like miniCM 4.0 or ICZ
Click to expand...
Click to collapse
If I try to format the ext partition to ext2 via PC tool, do you think this will have some effect. Because I don't want to change the rom

xxTTcc said:
If I try to format the ext partition to ext2 via PC tool, do you think this will have some effect. Because I don't want to change the rom
Click to expand...
Click to collapse
you mean you wanna ext2 partition?

fotak-x said:
you mean you wanna ext2 partition?
Click to expand...
Click to collapse
Or ext4, maybe there is issue with ext3 partitions and this rom. I've read an article that said that, ext4 partitions are not well supported, ext2, ext3 are supported with most of the roms
Edit: Now I saw that after reboot, A2SD is set back to none. Maybe I am having the superuser issue. I've flashed the fix, and will try again.

xxTTcc said:
Or ext4, maybe there is issue with ext3 partitions and this rom. I've read an article that said that, ext4 partitions are not well supported, ext2, ext3 are supported with most of the roms
Click to expand...
Click to collapse
then try ext2

As I know CWM (in ics and jb kernels) creates ext4, so choose ext4 in link2sd and it should work fine.

[Guide][Script]How to increase the Internal Memory

HI ! In this tutorial i am going to show ya all How to Increase the Internal Memory on SGA GT-S5830i.
This tutorial is not my work. I have taken other tutorials and made one full. As many people were a bit confused about doing this , here it is the all in one tutorial
What do you need :
- CronMod Script
- CWM
- Brain
- Latest Rafael.Baugis Kernels
CronMod Script by Styrke link : http://forum.xda-developers.com/showthread.php?t=1955422
- Now download the "Cronmod Unofficial by Styrke" from the thread ( I strongly recommand it , not the other versions because it doesn't lag and GPS works )
- Place it on SD Card after 1st step [ Partition SD Card step ]
Now we are going to make a partition to the SD Card so backup all your SD Card before doing this ( It formats it )
ClockWorkMod Recovery link : http://www.mediafire.com/?a4j6zsoyaihhy60
- Place it on SD Card after 1st step [ Partition SD Card step ]
Link2SD : Link in PlayStore ( Download when it's time to download on the installation steps lol :silly: )
OK , Let's start now :
Partition SD Card :
1) Open CWM Recovery
2) Go to "Advanced"
3) Select "Partition SD Card"
4) Choose your SD-ext size (if you’re using a 2Gb SD card, choose 512Mb. If your SD card is 4Gb or greater, you can choose 1024Mb)
5) Select "0M" Swap.
6) Wait for the procces finish.
7) Reboot.
8) Now download Link2SD from Playstore.
9) Open Link2SD you will be prompted to choose between ext2, ext3, ext4 or FAT32.
10) First , Choose ext2. If it don't work then restart Link2SD and when then don't choose ext2 but ext4. ( Don't worry , it works )
11) It will say mount script created. Reboot your phone now.
12) Open link2sd and if the message doesn’t show up, you succeded.
13) Go to Link2sd>Settings>check the autolink.
14) To check your memory, select “Storage Info”. This will show you the current state of your internal memory, FAT32, and ext2 partition.
Click to expand...
Click to collapse
Placing the 2nd partition of SD Card to internal.
15) Now your SD Card is formated .
16) Place the CronMod Script on your SD Card ( Cronmod Unofficial file )
17) Open CWM again
18) Foramt /data /sd-ext /system
19) Mount /system
20) Flash custom rom
21) Remount /system
22) Flash "Cronmod Unofficial " script.
23) Reboot
Click to expand...
Click to collapse
Alternative mod : If you have already your custom ROM just do these easy steps :
1) Format /data /sd-ext
2) Mount /system
3) Flash "Cronmod Unofficial" script
4) Reboot
Click to expand...
Click to collapse
NOW YOU SUCCESFULLY INCREASED YOUR INTERNAL MEMORY
How to delete 2nd partition and revert to normally :
1) Go to CWM
2) Go to Mounts and Storage
3) Choose " format /sdcard "
4) Done
Click to expand...
Click to collapse
Note : Backup everything again or you will lose every app installed on 2nd Partition too.
Press Thanks if i helped you
Credits :
1) Styrke ( For the Cronmod Script )
2) Adam Parnala ( Link2SD Tutorial )
3) Me for writing this TUT
Click to expand...
Click to collapse

how do I format sd card partition ??
any thing other than mini tool partision wizard ??
Sent from my GT-S5830i using xda app-developers app

is this to download?
Data2sd-ext Fixed.zip
As the other one is not there

No no ! No tool needed and what do you mean to format it ? Ah, if you mean the 2nd partion just format/wipe the /sd-ext on the mounts and storage on CWM . But it is unnessesary becouse the 2nd partition is transfered to the the internal memory.
Sent from my Galaxy S4

recommend fresh rom... rom with lot of appk maybe bootloop...no need link2sd... easy way, flash rom, flash kernel(boot.img & module) mount system & flash cronmod unofficial by styrke(latest script).. done... depend of what rom, maybe no need to mount system... kernel also, no need flash if rom include lattest kernel...:silly: adios...
#remember, create partition with cwm its totally format your sdcard... before do this, save data sdcard to pc/laptop... only left behind cwm.zip... when done, move back saving data to sdcard... when all its ready, happy flashing lol...

Sniper Killer said:
No no ! No tool needed and what do you mean to format it ? Ah, if you mean the 2nd partion just format/wipe the /sd-ext on the mounts and storage on CWM . But it is unnessesary becouse the 2nd partition is transfered to the the internal memory.
Sent from my Galaxy S4
Click to expand...
Click to collapse
Did you check your gps? It didnt work for me. I also prefer data2sd script but gps didnt work on it.
Sent from my GT-S5830i using Tapatalk 2

can u tell me how to do it in JELLY BLAST V3.4.plzzzz give detailed steps.

Wrong Section
Guides are for General Section

purumishra13 said:
can u tell me how to do it in JELLY BLAST V3.4.plzzzz give detailed steps.
Click to expand...
Click to collapse
Sorry , I haven't said there that RAFAEL.BAUGIS KERNELS NEEDED ! It's my mistake ! IT's universal for all d roms ! But JellyBlast v.3 doesn't have the Rafael baugis kernels , but if you have it it's ok . follow d steps !normally !

iamareebjamal said:
Wrong Section
Guides are for General Section
Click to expand...
Click to collapse
This is my first thread, sorry I'm a bit noob

MrNothingPersonal said:
recommend fresh rom... rom with lot of appk maybe bootloop...no need link2sd... easy way, flash rom, flash kernel(boot.img & module) mount system & flash cronmod unofficial by styrke(latest script).. done... depend of what rom, maybe no need to mount system... kernel also, no need flash if rom include lattest kernel...:silly: adios...
#remember, create partition with cwm its totally format your sdcard... before do this, save data sdcard to pc/laptop... only left behind cwm.zip... when done, move back saving data to sdcard... when all its ready, happy flashing lol...
Click to expand...
Click to collapse
LOL ! Isn't this what have you said already on the TUT !!! ? And without Link2SD you idiot , you can't choose the system files betwee ext2 olr ext4 or whatever !!! ( sorry fr the word "idiot' LOL )

Please change the font color of the first post.
It's unreadable with the dark theme of the xda app.
Sent from my GT-S5830i using xda app-developers app

Androidnow said:
Did you check your gps? It didnt work for me. I also prefer data2sd script but gps didnt work on it.
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
Yes, with MindCr rom + data2sd fix GPS is working..
Thanks !

Hey I followed your whole procedure,
but I got stocked when I wanted to apply the data2ext-fixed file
During my stock rom, I had partionated my sd-card on windows computer, not with CWM, but after I used ur guide, I partionated it again with CWM, so now it should have the structure given by CWM, right?
But here is the problem. In CWM I don't get the option "Format /data /sd-ext" there are just the following options: format "/data or /sdcard or /system or /cache" but no option "Format /data /sd-ext"
So might it be that CWM didn't apply the extention right?
When I open Link2SD it does all the things it should do, but the internal memory is rising, so maybe it is not putting the files in the right place, someone said instead of putting them to "sd-ext" it is putting them to "sdext2"
Another point: In the tutorial u mentioned after step 14)
"Placing the 2nd partition of SD Card to internal." Is that a point I have to do?
Because right now the 2nd partition is sdext2, but it is still not preventing that the internal memory is rising.
Hope u can help me to solve this problem.

Munchkin86 said:
Hey I followed your whole procedure,
but I got stocked when I wanted to apply the data2ext-fixed file
During my stock rom, I had partionated my sd-card on windows computer, not with CWM, but after I used ur guide, I partionated it again with CWM, so now it should have the structure given by CWM, right?
But here is the problem. In CWM I don't get the option "Format /data /sd-ext" there are just the following options: format "/data or /sdcard or /system or /cache" but no option "Format /data /sd-ext"
So might it be that CWM didn't apply the extention right?
When I open Link2SD it does all the things it should do, but the internal memory is rising, so maybe it is not putting the files in the right place, someone said instead of putting them to "sd-ext" it is putting them to "sdext2"
Another point: In the tutorial u mentioned after step 14)
"Placing the 2nd partition of SD Card to internal." Is that a point I have to do?
Because right now the 2nd partition is sdext2, but it is still not preventing that the internal memory is rising.
Hope u can help me to solve this problem.
Click to expand...
Click to collapse
LOL. Of course there is no such option like Format /data /sd-ext. What he mean is format your data and sd-ext one by one. Meaning you should format data 1st, After finished format sd-ext.
And for your second point problem, it is a title. Not a step to follow.

uchihachi said:
LOL. Of course there is no such option like Format /data /sd-ext. What he mean is format your data and sd-ext one by one. Meaning you should format data 1st, After finished format sd-ext.
And for your second point problem, it is a title. Not a step to follow.
Click to expand...
Click to collapse
Ok, but in CWM there are only the options "format data" and "format sd-card" so in this case "sd-card" and "sd-ext" is the same?
Because I don't want that the ext3 which i partitioned before will be deleted and the sd-card will only consist of one partition and not "sd-card" by itself and "ext3" part on the sd-card.
If i push "format sd-card" it will not destroy the partitions which i created before?

Munchkin86 said:
Ok, but in CWM there are only the options "format data" and "format sd-card" so in this case "sd-card" and "sd-ext" is the same?
Because I don't want that the ext3 which i partitioned before will be deleted and the sd-card will only consist of one partition and not "sd-card" by itself and "ext3" part on the sd-card.
If i push "format sd-card" it will not destroy the partitions which i created before?
Click to expand...
Click to collapse
Ha? Thats wierd. Actually you should see many option which one you wanna format in 'mount and storage'. Which version of CWM do you use? Where do you get it?
Sent from my GT-S5830i using xda premium

Munchkin86 said:
Ok, but in CWM there are only the options "format data" and "format sd-card" so in this case "sd-card" and "sd-ext" is the same?
Because I don't want that the ext3 which i partitioned before will be deleted and the sd-card will only consist of one partition and not "sd-card" by itself and "ext3" part on the sd-card.
If i push "format sd-card" it will not destroy the partitions which i created before?
Click to expand...
Click to collapse
LOL , data2ext script is only for ext2 first and you should go to mounts and systems and format /sd-ext and data as i said in the instructions . If you can't see any , buy some glasses You haven't seen correctly ! Follow d steps carefully. It's a bit complied so you should keep an eye to the thread and an eye to the phone .. And yes if you format /sdcard your partition will revert back , so you will uninstall it

Sniper Killer said:
LOL , data2ext script is only for ext2 first and you should go to mounts and systems and format /sd-ext and data as i said in the instructions . If you can't see any , buy some glasses You haven't seen correctly ! Follow d steps carefully. It's a bit complied so you should keep an eye to the thread and an eye to the phone .. And yes if you format /sdcard your partition will revert back , so you will uninstall it
Click to expand...
Click to collapse
Thank you for the answers.
So yeah maybe the CWM version I'm using is outdated.
So let me ask this
in this thread there are some files to root and also have CWM.
My phone is rooted, so which file (i think they should be most up-to-date CWM-files, right?) should I download and use for CWM?
http://forum.xda-developers.com/showthread.php?t=1551156
So another question, so you said the partition should be ext2 not ext3, otherwise the data2ext script doesn't work, right?
I think I can't see the "format sd-ext" option, because my CWM is outdated, which version should I install? Where is the link for the most current- or usable version? Should I get the ClockWorkRec_S5830C-i-M.zip from the thread mentioned above?
uchihachi said:
Ha? Thats wierd. Actually you should see many option which one you wanna format in 'mount and storage'. Which version of CWM do you use? Where do you get it?
Sent from my GT-S5830i using xda premium
Click to expand...
Click to collapse
I got it from a german android website called: android-hilfe.de but yeah I also think that the CWM is not up-to-date.
Anyway still thanks for your help.

Munchkin86 said:
Thank you for the answers.
So yeah maybe the CWM version I'm using is outdated.
So let me ask this
in this thread there are some files to root and also have CWM.
My phone is rooted, so which file (i think they should be most up-to-date CWM-files, right?) should I download and use for CWM?
http://forum.xda-developers.com/showthread.php?t=1551156
So another question, so you said the partition should be ext2 not ext3, otherwise the data2ext script doesn't work, right?
I think I can't see the "format sd-ext" option, because my CWM is outdated, which version should I install? Where is the link for the most current- or usable version? Should I get the ClockWorkRec_S5830C-i-M.zip from the thread mentioned above?
I got it from a german android website called: android-hilfe.de but yeah I also think that the CWM is not up-to-date.
Anyway still thanks for your help.
Click to expand...
Click to collapse
Yes, use CWM from rafael kernel thread..
Thanks !

Problem with installing cronmod int2ext

Hello,
I am a noob with a little experience in using custom roms on a HTC Wildfire S. My WFS is broken en since today iam a ace user. I have rooted the SGA and im using CWM recovery and installed the CM9 TW-rom from Sky-walker. GREAT ROM by the way. I want to use Int2ext cronmod script but i cant get it working. Ive already tried different things. With the WFS i always used it with a lot of different roms and had never any problems.
When installing i have followed the instructions of croniccorey.
I have format my sd-card and created a partition using CWM
Also tried it with SpaceCakers SGS and AOSP GB.
And already mounted system and data.
Does anybody have suggestions what to do?
Thanks!
Sent from my GT-P5110 using xda app-developers app

Johhny B. said:
Hello,
I am a noob with a little experience in using custom roms on a HTC Wildfire S. My WFS is broken en since today iam a ace user. I have rooted the SGA and im using CWM recovery and installed the CM9 TW-rom from Sky-walker. GREAT ROM by the way. I want to use Int2ext cronmod script but i cant get it working. Ive already tried different things. With the WFS i always used it with a lot of different roms and had never any problems.
When installing i have followed the instructions of croniccorey.
I have format my sd-card and created a partition using CWM
Also tried it with SpaceCakers SGS and AOSP GB.
And already mounted system and data.
Does anybody have suggestions what to do?
Thanks!
Sent from my GT-P5110 using xda app-developers app
Click to expand...
Click to collapse
Which script did you use?
Mount /system, /data, /sd-ext and flash it, It should work fine
Try to put it in init.d folder and set the permissions manually using a file browser, then reboot your device

Yes! It worked. Did a clean install mounted data enz. and fixed permissions with cwm.I am using int2ext+ now. Thanks for the input.
Sent from my GT-P5110 using xda app-developers app

Johhny B. said:
Yes! It worked. Did a clean install mounted data enz. and fixed permissions with cwm.I am using int2ext+ now. Thanks for the input.
Sent from my GT-P5110 using xda app-developers app
Click to expand...
Click to collapse
you're welcome

Apps are not installing after Int2Ext+
Hi,
I was using Apocalypse ROM with CronMod Int2Ext+ (Ext2 partition on SD) and everything was working fine. Recently, I downloaded a new ROM - The Ultimatum and installed Int2Ext+. It installed correctly, however I could not install many apps after that. Downloading from market would give an error. This problem is happening for only those several set of apps.
Can someone pls guide me as to what the problem might be. I'm kind of new here.
Regards,
Kunal
---------- Post added at 01:02 PM ---------- Previous post was at 12:57 PM ----------
zroftroffer said:
Hi,
I was using Apocalypse ROM with CronMod Int2Ext+ (Ext2 partition on SD) and everything was working fine. Recently, I downloaded a new ROM - The Ultimatum and installed Int2Ext+. It installed correctly, however I could not install many apps after that. Downloading from market would give an error. This problem is happening for only those several set of apps.
Can someone pls guide me as to what the problem might be. I'm kind of new here.
Regards,
Kunal
Click to expand...
Click to collapse
I tried the above with link2sd and darktremor a2sd as well, but all were giving the same problem. Before installing any app2sd script the applications were installing correctly. Only after installing the script they stopped working. Is there some script on The Ultimatum ROM which is clashing with the above app2sd scripts?
I know I should post this on the ROM page, however I do not have the priviledges.
Regards,
Kunal

zroftroffer said:
Hi,
I was using Apocalypse ROM with CronMod Int2Ext+ (Ext2 partition on SD) and everything was working fine. Recently, I downloaded a new ROM - The Ultimatum and installed Int2Ext+. It installed correctly, however I could not install many apps after that. Downloading from market would give an error. This problem is happening for only those several set of apps.
Can someone pls guide me as to what the problem might be. I'm kind of new here.
Regards,
Kunal
---------- Post added at 01:02 PM ---------- Previous post was at 12:57 PM ----------
I tried the above with link2sd and darktremor a2sd as well, but all were giving the same problem. Before installing any app2sd script the applications were installing correctly. Only after installing the script they stopped working. Is there some script on The Ultimatum ROM which is clashing with the above app2sd scripts?
I know I should post this on the ROM page, however I do not have the priviledges.
Regards,
Kunal
Click to expand...
Click to collapse
AFAIK The Ultimatum rom has already an int2ext script it might be the problem (swap all kernel) so follow he steps to install it correctly, you only need to mount /sd-ext and format this partition before flahs the rom to clean your sd-ext partition.
If you select fire kernel then you'll need int2ext script
1. download it and put it in sdcard's root
2. boot into cwm
3. mount /system /data and /sd-ext
4. format /sd-ext
5. flash the script
6. enjoy
Download Link:
http://d-h.st/Otj

Viper The Ripper said:
AFAIK The Ultimatum rom has already an int2ext script it might be the problem (swap all kernel) so follow he steps to install it correctly, you only need to mount /sd-ext and format this partition before flahs the rom to clean your sd-ext partition.
If you select fire kernel then you'll need int2ext script
1. download it and put it in sdcard's root
2. boot into cwm
3. mount /system /data and /sd-ext
4. format /sd-ext
5. flash the script
6. enjoy
Download Link:
http://d-h.st/Otj
Click to expand...
Click to collapse
Hi Viper.. Thanks for your reply...
I know how to install int2ext.. I did it for my previous ROM and it was working perfectly..
I installed The Ultimate ROM with Firekernel. I have an ext2 partition on my sd. And i did the steps as you have mentioned above, however its still giving the same issues.. Some apps are not getting installed..

zroftroffer said:
Hi Viper.. Thanks for your reply...
I know how to install int2ext.. I did it for my previous ROM and it was working perfectly..
I installed The Ultimate ROM with Firekernel. I have an ext2 partition on my sd. And i did the steps as you have mentioned above, however its still giving the same issues.. Some apps are not getting installed..
Click to expand...
Click to collapse
but did you use int2ext+ script? because it is the only one that works with ext2/3/4 partitions

Viper The Ripper said:
but did you use int2ext+ script? because it is the only one that works with ext2/3/4 partitions
Click to expand...
Click to collapse
Yes I used int2ext+. And I knew the script had worked because I could see 400mb free. But some apps were not getting installed.