Related
I think most of the active members are aware of the video difficulties SO please (please, please) turn your rants off for this thread. What I am trying to find is a combination of settings that DO work.
My preferred codec is MP4.
From some suggestions in other threads, I have tried these encoding settings.
Screen resolution: 320x240
Frames Per Second: 30
Kbps: 300
Audio codec: [email protected]
...and I am playing back on TCPMP 0.72RC1 using these settings
Options/Video: Raw FrameBuffer
Options/Video/Dither: Off
Options/Video/Pixel Aspect Ratio: Auto
Options/Settings/Advanced/Slow Video Memory: On
Options/Settings/Buffering/Preload at Underrun: 85%
Using this, all I get for video is about 1 frame every 3 seconds. Audio is fine.
So can anyone add this this for getting MP4 to work?
Do I need to use a different codec? If so, I would prefer something other then AVI, since I have a mixed environment. Does anyone have suggestions on the best cross platform Codec, that has work well on the Kaiser?
I'd be interested in this too. I can play back videos taken from the video camera flawlessly but when trying to encode them to the same MP4 codec they can get choppy. Not sure what gives :0
Using WMV here
I couldn't get the mp4 output from my ATI Multimedia Centre software to work at all on my TyTN II so I've settled on WMV 9 at 352 x 288 resolution and 372 kbps (thats at 15 fps). Anything with higher bit rate than that seems to cause problems with to much screen tearing during fast movement scenes.
You might want to follow this thread... seams that the Core Player is attacking this known problem for the Tilt. I'm by no means an expert on this, but seems like the Qualcomm QTV technology for the video has some issues:
http://www.corecodec.com/forums/index.php?topic=596.0
I use PDXE, Lathe, and a few others to encode Divx videos at 320x240 video quality at "28" audio in stereo at 96 or 128k MP3 with a total bitrate under 500k (usually shoot for 475kbps). If the encoder allows it, for portable video I bump the audio volume by 15% and I increase brightness as well. To me most movies look darker on the small screen. If cropping is allowed I crop widescreen content, cutting off some of the sides of the picture to get closer to the 3:4 ratio of PDA screen. I also like to turn the brightness down as much as possible to increase battery life so the bump in brightness helps there as well. An average movie 1:50 length is about 480MB
I've used Core and TCPMP (currently using TCPMP for the youtube capability) and use Rawframe buffer as well. I'm sure that Core 1.2 will make things even better.
I get 30FPS and normal fluid video, looks like my other 8525, hx4700, and Archos 320 and 400 units with crisp clear video, no complaints.
This MP4 doesnt play on my pc only the phone???
Flying Kiwi said:
I couldn't get the mp4 output from my ATI Multimedia Centre software to work at all on my TyTN II so I've settled on WMV 9 at 352 x 288 resolution and 372 kbps (thats at 15 fps). Anything with higher bit rate than that seems to cause problems with to much screen tearing during fast movement scenes.
Click to expand...
Click to collapse
This MP4 doesnt play on my pc only onthe phone???
I have an TiLt and when i try to record videos on my phone in MP4, it appears to work fine and i can play it back on my phone using TCPMP. but when i try to run this on my computer rnning vista it only shows video with no sound.
What can be causing this, is there a way to fix this and has anyone else noticed this..
ps. i hope ths has not been spoken about b4, i hate sounding like a nubie
zulualpha7 said:
This MP4 doesnt play on my pc only onthe phone???
Click to expand...
Click to collapse
There's lots avout video formats in the wiki here:
http://wiki.xda-developers.com/index.php?pagename=The H.264 (a.k.a. MPEG-4 Part 10 and AVC) Bible
FWIW my mp4s recorded on my TyTN II wont playback on my PC either, it's simply a case of finding a suitable codec.
recorded videos on Tilt not playing on vista with sound!! I GOT IT FIXXX
Flying Kiwi said:
There's lots avout video formats in the wiki here:
http://wiki.xda-developers.com/index.php?pagename=The H.264 (a.k.a. MPEG-4 Part 10 and AVC) Bible
FWIW my mp4s recorded on my TyTN II wont playback on my PC either, it's simply a case of finding a suitable codec.
Click to expand...
Click to collapse
Hey thanx for the reply but VLC is what i got installed and doesnt work, thought someone else had the same issue like mine. The .MP4 files that the TiLT records doesnt playback properly. PROBLEM is : I get the video portion just fine, but no sound. I have the. I tried in Media Player, VLC, QuickTime, RealPlayer, etc.... All the same... video plays but no sound.
I googled the issue and found out some other HTC phone users got it too and a couple solutions i found are.
1. In QuickTime it says: "Error 2041 - Invalid sample description in movie"
Solution: Checked the Apple.com or quicktime forums, if you use quicktime, change the file name from .MP4 to .3GP and it will work, it will not work otherwise. (if you dont know how to rename the files or dont see extension, Windows vista or XP go to tools>folder options>view>uncheck hide file extensions for known file types and voila)
2. Since I did so much reading on this, I got a new player (KMPlayer) that beats vlc in my books it plays the files recorded from the tilt just fine unlike VLC latest build, its fast and does all vlc does but it has a better GUI and plays anything you throw at it. you can get kmplayer here
Conclusion: The TiLt is fine, just that I couldnt get the right player to run the video files it records. apparently there is some issue with the qualcomm processor and the video output files of .MP4, some others have reported issues with any .MP4 files and had to do the same listed above.
Hope this helps someone here...
if you want an mp4 player on your pc for free, go to nokia.com
zulualpha7 said:
Hey thanx for the reply but VLC is what i got installed and doesnt work, thought someone else had the same issue like mine. The .MP4 files that the TiLT records doesnt playback properly. PROBLEM is : I get the video portion just fine, but no sound. I have the. I tried in Media Player, VLC, QuickTime, RealPlayer, etc.... All the same... video plays but no sound.
I googled the issue and found out some other HTC phone users got it too and a couple solutions i found are.
1. In QuickTime it says: "Error 2041 - Invalid sample description in movie"
Solution: Checked the Apple.com or quicktime forums, if you use quicktime, change the file name from .MP4 to .3GP and it will work, it will not work otherwise. (if you dont know how to rename the files or dont see extension, Windows vista or XP go to tools>folder options>view>uncheck hide file extensions for known file types and voila)
2. Since I did so much reading on this, I got a new player (KMPlayer) that beats vlc in my books it plays the files recorded from the tilt just fine unlike VLC latest build, its fast and does all vlc does but it has a better GUI and plays anything you throw at it. you can get kmplayer here
Conclusion: The TiLt is fine, just that I couldnt get the right player to run the video files it records. apparently there is some issue with the qualcomm processor and the video output files of .MP4, some others have reported issues with any .MP4 files and had to do the same listed above.
Hope this helps someone here...
Click to expand...
Click to collapse
MANY THANKS! zulualpha7,
I have had the error 2041 problem for a long time and have never been able to play vids recorded on my TyTn II on my PC.
I almost installed various codec packs as other forum members have done but after reading about potential problems of having multiple codecs for same file type and upsetting the system I decided not to do this.
I have some really important 'once in a lifetime' family moments like my friend's son catching his first fish etc... I though they were all lost for ever.
I just downloaded latest Quicktime and renamed file extensions to ".3gp" like you said and now I can watch everything!!!!
Thank you so much this really has been a big improvement for me.
ONCE AGAIN THIS FORUM ROCKS! Thanks to everyone for so much fantastic helpful info.
So I've taken a lot of videos of my tilt, but I can't get them to play on my PC. They're in .mp4 format but they won't play in WMP, iTunes, QuickTime, or GOM Player. Anyone know a program that can handle these or what I can do to perhaps change the format the phone outputs them?
VLC should work.
After I move the video files from my tilt to my computer, I just rename the file from mp4 to 3gp, example: "video1.mp4" to "video1.3gp". It plays fine in quicktime after that. It gives me a warning that changing the file extension might make the file unreadable or something, but I haven't had a problem yet.
VLC (the aggressive player) will play anything you want, just get the right edition for you.
Click Here to Download VLC
VLC won't work. It plays the audio but the screen is blank. =/
That's odd, my copy of VLC plays the Video but not the audio....
You can upload them to youtube and myspace and they will play fine there...lol
Spartan2x said:
That's odd, my copy of VLC plays the Video but not the audio....
Click to expand...
Click to collapse
same here, except WMP plays the audio and video fine for me, but then when i try and exit it crashes lol
dude wtf...why cant it just output normal video
Hello,
I have the same issue. I could not have VLC read the movies correctly.
I now use Mirksoft Mobile 3GP converter to transform my videos into avi format (with correct output on VLC).
It can be found here : http://www.miksoft.net/
Hope this helps
there is a quicktime codec for vlc, with this you have sound and video
if you want them to play in WMP, you need a 3ivx codec.
http://www.3ivx.com/codec/download_win.php?format=exe
It's a trial, but it DOES work.
try this one Gom Player http://www.gomlab.com/eng/ it downlads codecs if you dont have them it should read any video.
boss1234 said:
After I move the video files from my tilt to my computer, I just rename the file from mp4 to 3gp, example: "video1.mp4" to "video1.3gp". It plays fine in quicktime after that. It gives me a warning that changing the file extension might make the file unreadable or something, but I haven't had a problem yet.
Click to expand...
Click to collapse
I tried this and it worked just fine! Just changed the file extension to .3gp and it play perfectly in quicktime, good audio/video.
Ok. I recorded some video on my AT&T Tilt with a memory card. It plays fine on my phone. Well I want to get it on my computer. When I tried to, it was in the MP4 format. So I opened it with Quicktime and iTunes and it wouldn't play. It said there was an error. So I was gonna convert it. I tried to, but it gave me a warning saying that it would have no sound, so I didn't do that. Then I downloaded VLC Player and when I played the videos, they didn't have sound. I tried putting them in Windows Media Center, didn't work. I tried ActiveSync. Didn't work. There has to be some possible way to do this. PLEASE HELP!!!!!!!!!
Same thing happens to me. Now I just record in the other format, QIF I believe. And that works fine.
THANKYOU!!!!!!!!!!
how did you even get "good" video playback?
how did you even get "good" video on the TILT? is it the change in file type that makes the video better in itself? where do you change it?
You can change to CIF by selecting it from the Capture Settings menu (hit menu when the camera is running) under Resolution. The capture format can be changed from MPEG-4 to H.263 if you go to Advanced > Capture Format.
Recording in a well-lit environment helps. I'm not usually affected by placebo, but I and a few other users have reported increased camera performance after installing the latest test drivers for the Kaiser from htcclassaction.org. It DID seem that the framerate was higher. I can't rule out the possibility that updating to windows mobile 6.1 may have made a difference, but I know I don't keep apps running in the background and the comparison whilst not scientific would be pretty fair.
What can be used to view H.263 on the home pc? Will media player play it? And is there a good reason why it just doesn't record to .wmv or regular old mpeg? As you can tell I am a moron when it comes to video.
VLC will read it
kbcherry said:
What can be used to view H.263 on the home pc? Will media player play it? And is there a good reason why it just doesn't record to .wmv or regular old mpeg? As you can tell I am a moron when it comes to video.
Click to expand...
Click to collapse
QuickTime will play H.263 encoded files.
The Tilt does not use WMV or MPEG because they do not have formats optimized for mobile devices, so the files end up being huge.
Thanks, that makes sense!
my mp4 videos run fine on wm player! try downloading the vista or xp codec pack which is available on most torrent sites
I know its old but anyway...I record video w/ my kaiser, bluetooth the video over to my laptop, convert with WM convert, open w/ movie maker, edit then post. Sooooooooo easy and no cables required!
You're all going through waaaay to much by using converters & what not. When recording in mpeg4 format just rename the files to ".3gp" after you transfer them to your computer and they will play regularly through quicktime with sound & everything intact.
download K lite codec pack: http://www.free-codecs.com/download/K_lite_codec_pack.htm
it will allow windows media player to play ANYTHING, throw and file at it and it will play
VLC Works for me
VLC works for me, try it
TLJack64 said:
You're all going through waaaay to much by using converters & what not. When recording in mpeg4 format just rename the files to ".3gp" after you transfer them to your computer and they will play regularly through quicktime with sound & everything intact.
Click to expand...
Click to collapse
Use a converter to be able to edit the video in windows movie maker, it takes like 10 seconds to convert a MPEG4 to WMV. (i've got the codec pack but in order to edit the video you need to convert it.)
I went to a concert and recorded some songs live at hd high res and transferred to my computer,i could not get windows media player to play them ,and i tried 20 or so shareware programs and cannot play them.I then moved the files back to the same folder that i took them from and cant view them on the phone either.after doing some research i found them to be a format called h264 with acc ..the file reads vid_20120810_215737_517.mp4. I understand mp4 is a popular file format,does anyone know a program that can play this type of file or what codec do i need to view them?I have vplayeys and bs video from android market place.
VLC player can most definitely play it.
Sent from my MB886 using Tapatalk 2
I got my device today and loving it .. used mostly for youtube/play music and was able to cast chrome tab easily and also fullscreen HTML5 videos
However I got this trick from one of the site .. navigate from chrome browser to say D:\ drive. type this and enter
file:///D:/
you will see you the list of files.. by clicking on them, I was able to play avi and mkv files and cast the same in fullscreen.. only one of my mkv file failed to play (may be issue with codec)..i think the prereq is to install VLC player (who doesn't :laugh: )
can't stop loving my chromecast .. only issue is 720p setting in chrome browser is kinda lagging so switched to 480p , thats ok for now
rajanikanthr said:
I got my device today and loving it .. used mostly for youtube/play music and was able to cast chrome tab easily and also fullscreen HTML5 videos
However I got this trick from one of the site .. navigate from chrome browser to say D:\ drive. type this and enter
file:///D:/
you will see you the list of files.. by clicking on them, I was able to play avi and mkv files and cast the same in fullscreen.. only one of my mkv file failed to play (may be issue with codec)..i think the prereq is to install VLC player (who doesn't :laugh: )
can't stop loving my chromecast .. only issue is 720p setting in chrome browser is kinda lagging so switched to 480p , thats ok for now
Click to expand...
Click to collapse
welcome to the known info party lol jk. im glad you realized how to do it on your own though I and many others have had issued with avi. will try your vlc workaround later
any idea how to get avi working? mkv and mp4 work for me, but not avi.
Is this really a way to get AVI files working? I'll have to try it if it really works.
jbaruch76 said:
any idea how to get avi working? mkv and mp4 work for me, but not avi.
Click to expand...
Click to collapse
sungod88 said:
Is this really a way to get AVI files working? I'll have to try it if it really works.
Click to expand...
Click to collapse
I started using wondershare ultimate video converter (you know where to download), I converted all my avi files to mp4 and now i dont have that limitation of playing any type of files.
nook'r said:
I started using wondershare ultimate video converter (you know where to download), I converted all my avi files to mp4 and now i dont have that limitation of playing any type of files.
Click to expand...
Click to collapse
I would do that but I have A LOT of files and it would just take way to long to convert them all also I would be converting then deleting the originals. How long does it take to convert the videos?
I use Ctrl & O to get the chrome file browser up. I can't play *.avi files (it tries to copy them to d/load folder instead) is there a workaround? besides converting them all to a different format, is there a reason why Google/Chrome don't natively play *.avi? It's not like I can't play the files using VLC for example.
If you click the down arrow in the upper right hand corner on the chrome extension, there is an option to cast the entire screen instead of just the tab.
@sungod88
It takes about 3-5 min for a 700mb file, by the time you watch 1 movie you should have atleast 15 - 20 movies converted to mp4, its a lot easier than what it seems.
piatikantrop said:
If you click the down arrow in the upper right hand corner on the chrome extension, there is an option to cast the entire screen instead of just the tab.
Click to expand...
Click to collapse
doing this just gives me black screen on tv.
Any idea why I can't play avi files in browser? I installed both DivX Plus Web Player, and VLC Web Plugin. I had to disable Quicktime plugin to get MPG, and at this point I seem to have everything (mpg, mp4, mkv, ...) but avi. I see the the avi file extension is listed under the MIME type for VLC plugin, bug chrome still just downloads it. My chromecast gets here today or tomorrow, any ideas about how to get chrome to just play the file?
Also, along the same line of thinking. How can I identify which plugin is playing a given file?
Drag and drop works just fine too..
nice to know you can cast local files. Anyone tried casting video from ubuntu?
No audio in chrome when playing local files
I know that i am not the first person to experience this but i have not been able to find a solution. When playing an MKV file i have no way in getting any audio out of it at all. Not from my laptop and not from my chrome cast. Nothing at all I have a little slash through the audio speaker that wont go away!
rajanikanthr said:
can't stop loving my chromecast .. only issue is 720p setting in chrome browser is kinda lagging so switched to 480p , thats ok for now
Click to expand...
Click to collapse
There's an option for 720p in chrome browser?
Sent from my HTC6435LVW using xda premium
dougyfresh254 said:
I know that i am not the first person to experience this but i have not been able to find a solution. When playing an MKV file i have no way in getting any audio out of it at all. Not from my laptop and not from my chrome cast. Nothing at all I have a little slash through the audio speaker that wont go away!
Click to expand...
Click to collapse
If the audio is DTS or AC3 it won't play through Chrome. I believe AAC and MP3 will play. To avoid re-encoding your videos I would recommend installing plex and using their Web view to play the videos, it will transcode the video/audio on the fly and cast that way
Sent from my SPH-L710 using xda app-developers app
dougyfresh254 said:
I know that i am not the first person to experience this but i have not been able to find a solution. When playing an MKV file i have no way in getting any audio out of it at all. Not from my laptop and not from my chrome cast. Nothing at all I have a little slash through the audio speaker that wont go away!
Click to expand...
Click to collapse
Have you checked the mkv files for Compressed Headers? I had this problem, with trying to play mkv files in my theater+. I used a tool called mkvmerge to remove the compressed headers. That fixed my issue.
Plex works for .avi and mkv fils.
Plex works for .avi and mkv fils.
Using it now.
Just set up Plex Media Server.
tlally2001 said:
Plex works for .avi and mkv fils.
Using it now.
Just set up Plex Media Server.
Click to expand...
Click to collapse
PLEX is not working. If you did get it to work, please go into more detail in how you pulled it off. Simply installing the software does nothing and it is so unstable that trying to do anything with the software causes it to lock up.
How can I change audio source and choose subtitles, when playing an MKV file in chrome browser?
I've tried to search for a plugin or extension, but couldn't find one.
Thanks