Hi.
This package adds Touch Boost and a multi-processor optimized zram to your CM10 Nightly. Maybe incompatible with older Nightlies or newer. (Currently running my own build - Should be identical with the Nightly from 09.11).
I flagged this stuff as DEV because it may leads to incompatible behaviour and maybe increase battery drain.
Please report (if it helps etc)
Download
cool, gonna try it
Thank u sir ! Does it helps with ril problems ?
Inviato dal mio LG-P990 con Tapatalk 2
Hi Benee ,
This is a good start for CM10 modifications.
I am currently trying to get iwconfig to work with Wifi TX power app.
Have you plans on compiling additional governors such as smartassv2 or lagfree for the O2X? Would be great as we now have the possibility to use governors...
Sent from my LG-P990 using xda app-developers app
Thank you benee!
Sent from my LG-P990 using xda app-developers app
der.einstein said:
Hi Benee ,
This is a good start for CM10 modifications.
I am currently trying to get iwconfig to work with Wifi TX power app.
Have you plans on compiling additional governors such as smartassv2 or lagfree for the O2X? Would be great as we now have the possibility to use governors...
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Nope. I'm not a fan of these voodoo magic governors. Most are ****ty, and bloated und just increase CPU overhead. Better save some cycles and use a simple one like ondemand.
I would suggest that you use interactive or ondemand. Both have Touch Boost support. Which really helps imho.
first of all thanks for sharing.
i'm using this with 26% of zRAM and interactive as cpu governor.
i don't see any particular difference for now, i will report better tomorrow after some daily use
can you add different i/o scheduler to this pack? like simple i/o, bfq, cfq, just to see if we can increase i/o speed.
EDIT: WiFi not working anymore It can't be enabled on 08/11 build.
After flashing the tweak pack my WiFi wont come on again.
I saw you put a wireless.ko inside the zip. Maybe something is wrong with it?
PS: I miss the conservative governor from stock CM10 already
Edit: I am also on nightly 1107
Sent from my LG-P990 using xda app-developers app
der.einstein said:
After flashing the tweak pack my WiFi wont come on again.
I saw you put a wireless.ko inside the zip. Maybe something is wrong with it?
PS: I miss the conservative governor from stock CM10 already
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
I was just gonna post this. Same issue here. I'm on the 1107 build.
Sent from my LG-P990 using xda app-developers app
xExabyte said:
I was just gonna post this. Same issue here. I'm on the 1107 build.
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Same but i'm on the 1108 build how to uninstall this tweak pack?
can someone please make a tweak pack which can un-restrict the RIL installation? in such case we can test nightlies with various bb and ril combinations and find our own solutions for many many reports of voice call issues.
How can we use getril working or manually place ril file in appropriate place?
Rom is really faster but wifi doesn't work, With 1103
Sent sometimes from my iPad, if working, using Tapatalk HD
---------- Post added at 09:06 PM ---------- Previous post was at 09:05 PM ----------
atheoran said:
Same but i'm on the 1108 build how to uninstall this tweak pack?
Click to expand...
Click to collapse
Re flash 1108
Sent sometimes from my iPad, if working, using Tapatalk HD
atheoran said:
Same but i'm on the 1108 build how to uninstall this tweak pack?
Click to expand...
Click to collapse
reflash the cm10 rom file, it will overwrite this kernel.
cmahendra said:
can someone please make a tweak pack which can un-restrict the RIL installation? in such case we can test nightlies with various bb and ril combinations and find our own solutions for many many reports of voice call issues.
How can we use getril working or manually place ril file in appropriate place?
Click to expand...
Click to collapse
Arcee told us not to change the RIL.
Sent from my LG-P990 using xda app-developers app
I think the kernel modules are in the wrong folder.
It should be /system/lib/modules instead of/system/modules shouldn't it?
Sent from my LG-P990 using xda app-developers app
I have modified the update ZIP with the correct path. You can flash it to get wifi working again.
However remove the modules from /system/modules
der.einstein said:
I have modified the update ZIP with the correct path. You can flash it to get wifi working again.
However remove the modules from /system/modules
Click to expand...
Click to collapse
A small error again it seems
This one I attached should work.
Thanks benee!
Will soon test and report.
ive tryed the fix pack by tonyp ics stock test rom
got no problems so far
tonyp rom seems to have better response after this tweak
Sent from my LG-P990 using xda premium
pidocchio said:
first of all thanks for sharing.
i'm using this with 26% of zRAM and interactive as cpu governor.
i don't see any particular difference for now, i will report better tomorrow after some daily use
can you add different i/o scheduler to this pack? like simple i/o, bfq, cfq, just to see if we can increase i/o speed.
EDIT: WiFi not working anymore It can't be enabled on 08/11 build.
Click to expand...
Click to collapse
To zram - DON'T touch the cm option. A script is included. To i/o scheduler. BFQ/CFQ are to complex imo. Noop is too simple. Deadline is the perfect mix (It's tweaked for flash storages). It's pretty cheap (cpu cycle) etc. So nope - not gona happen. However I think some other dev will start adding those stuff soon.
der.einstein said:
After flashing the tweak pack my WiFi wont come on again.
I saw you put a wireless.ko inside the zip. Maybe something is wrong with it?
PS: I miss the conservative governor from stock CM10 already
Edit: I am also on nightly 1107
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Could you please read the op? I'm doing this on a custom build: It's equivalent to the CM build tomorrow. So problems will occur This is why it's flagged as DEV. Currently there are big changes on daily basis. Not gona update this often, but on my Github you can find the source and add it to your own builds.
Benee said:
To zram - DON'T touch the cm option. A script is included. To i/o scheduler. BFQ/CFQ are to complex imo. Noop is too simple. Deadline is the perfect mix (It's tweaked for flash storages). It's pretty cheap (cpu cycle) etc. So nope - not gona happen. However I think some other dev will start adding those stuff soon.
Could you please read the op? I'm doing this on a custom build: It's equivalent to the CM build tomorrow. So problems will occur This is why it's flagged as DEV. Currently there are big changes on daily basis. Not gona update this often, but on my Github you can find the source and add it to your own builds.
Click to expand...
Click to collapse
I did not offend you in any way. I am sorry if you feel so. I just thought to help others fix wifi quick without the need to reflash whole ROM.
Sent from my LG-P990 using xda app-developers app
Related
Going to try this on the D3, its big in the fascinate world. May be worth a dev porting to the D3 specifically. I'm going to take the plunge though since we can do nandbackups.
http://forum.xda-developers.com/showthread.php?t=1236779
From the thread post:
Whats inside:
changed partition mounts--- for less data corruption
patched sqlite's----IMPROVES I/O
honecomb 3.1 fugu mod-IMPROVES SCROLLING/RESPONSIVENESS
All new init.d files---PARTITION MOUNTS,CACHE,SYSCTL,KERNEL
Sysctl.conf----TWEAKS KERNEL AND I/O SCHEDULER
tweaked scaling governor----faster cpu performance
It has been reported to work on the Motorola Atrix, so that gives me hope for some additional improvements on the D3.
Sweet! Let us know how it works!
sent from my MONSTERDroid3 from the XDA app
Izeltokatl said:
Going to try this on the D3, its big in the fascinate world. May be worth a dev porting to the D3 specifically. I'm going to take the plunge though since we can do nandbackups.
http://forum.xda-developers.com/showthread.php?t=1236779
From the thread post:
Whats inside:
changed partition mounts--- for less data corruption
patched sqlite's----IMPROVES I/O
honecomb 3.1 fugu mod-IMPROVES SCROLLING/RESPONSIVENESS
All new init.d files---PARTITION MOUNTS,CACHE,SYSCTL,KERNEL
Sysctl.conf----TWEAKS KERNEL AND I/O SCHEDULER
tweaked scaling governor----faster cpu performance
It has been reported to work on the Motorola Atrix, so that gives me hope for some additional improvements on the D3.
Click to expand...
Click to collapse
So...howd it go?
evulhotdog said:
So...howd it go?
Click to expand...
Click to collapse
Perhaps not so well?
Sent from my DROID3 using xda premium
I have this mod applied on my mytouch 4g, made a big difference. Hope it works out for this device as well..
Wolfhere said:
Perhaps not so well?
Sent from my DROID3 using xda premium
Click to expand...
Click to collapse
I'm gonna test this myself in a few hours. Ill report back
Sent from my DROID3 using XDA App
Maybe his phone ripped a hole in space-time; He was sucked into another dimension.
Bobbar said:
Maybe his phone ripped a hole in space-time; He was sucked into another dimension.
Click to expand...
Click to collapse
Worst that happens is a bootloop and then you just boot into recovery and restore /system and you're back in business
Sent from my DROID3 using XDA App
erismaster said:
Worst that happens is a bootloop and then you just boot into recovery and restore /system and you're back in business
Sent from my DROID3 using XDA App
Click to expand...
Click to collapse
I looked throught the zip. It contains some files that the D3 doesnt have (or are in a different location). So some of the changes will probably do nothing.
Check out the newest from Hashcode. You can now restore from BP Tools. No need to flash and restore
Sent from my DROID3 using xda premium
Wolfhere said:
Check out the newest from Hashcode. You can now restore from BP Tools. No need to flash and restore
Sent from my DROID3 using xda premium
Click to expand...
Click to collapse
The .zips fail to install so this won't work on our phones. Not without tweaking.
And that's been out for over a week. I updated my recovey thread with it last week.
Sent from my DROID3 using XDA App
erismaster said:
The .zips fail to install so this won't work on our phones. Not without tweaking.
And that's been out for over a week. I updated my recovey thread with it last week.
Sent from my DROID3 using XDA App
Click to expand...
Click to collapse
I install the files inside the ZIP manually, it works out perfect and seems much smoother and with a better memory management now.
jchenny said:
I install the files inside the ZIP manually, it works out perfect and seems much smoother and with a better memory management now.
Click to expand...
Click to collapse
Did you do anything with the sysctl.conf and init.d?
Sorry for the delays... yes, as stated above, the zip files will not flash to the D3 (even though they do flash to the Moto Atrix??).
But you can definitely rip out files push them with Root Explorer or ADB commands. I haven't had time to mess with that but I may jump on it later today. Glad someone else tried and showed positive signs. That is encouraging.
I applied manually.
Don't notice any difference, really. But it may respond better to my finger. I'll have to run it for a few days.
Bobbar said:
I applied manually.
Don't notice any difference, really. But it may respond better to my finger. I'll have to run it for a few days.
Click to expand...
Click to collapse
Do we have init.d support? If not the init scripts probably wont do too much.
Willis111 said:
Do we have init.d support? If not the init scripts probably wont do too much.
Click to expand...
Click to collapse
I snatched the files from the latest SteelDroid to enable init.d. However I also used the scripts from that rom as well as they include alot the same tweaks.
I discovered that the sysctl.conf tweaks have no affect. We dont seem to have access to those adjustments. Perhaps because of our stock kernel?
for you, if you have a stock kernel to enable init.d .....
http://forum.xda-developers.com/showthread.php?t=1017291
If anyone is interested in some new govs and the sio I/O scheduler for rooted stock or rom bionic, check this out!
http://rootzwiki.com/index.php?/topic/29950-New-governors!
New governors!
http://rootzwiki.com/index.php?/topic/29950-New-governors!
New governors!
If possible, please post all questions and findings in the official thread so everyone can share there findings.
48656C70206D6521
Looks nice, but it's not working for me on .230 leak / AOKP rom.
Sent from my XT875 using xda premium
nkmassie said:
Looks nice, but it's not working for me on .230 leak / AOKP rom.
Sent from my XT875 using xda premium
Click to expand...
Click to collapse
Are you using setcpu? Im on stock 232.
48656C70206D6521
No, I am using no frills cpu
Sent from my XT875 using xda premium
nkmassie said:
No, I am using no frills cpu
Sent from my XT875 using xda premium
Click to expand...
Click to collapse
Gotcha. Ok did you set permissions on the ko files and put the init script in init.d folder and reboot? There is also the possibility that there has been a kernel change to .232 Which I'm using in the area of the cpu driver. Just make sure you did the steps above and go from there.
48656C70206D6521
You also try to manually insmod the modules using terminal.
Obviously don't use the quotations.
Type "su" enter
"insmod /system/lib/modules/symsearch.ko" enter
"insmod /system/lib/modules/cpufreq_interactiveX.ko" enter
"insmod /system/lib/modules/cpufreq_hotplugX.ko" enter
"insmod /system/lib/modules/cpufreq_smartass2.ko" enter
"insmod /system/lib/modules/cpufreq_pegasusq.ko" enter
"insmod /system/lib/modules/sio-iosched.ko" enter
48656C70206D6521
After a ton of noodling, I got it to work. I switched from .230 to .232 and it still did not work. So I tried 2 more things: 1) I used script manager to run at boot and use superuser, then 2) changed permission of the 90modules file to r-x-r-x-r-x, and rebooted. Fully working now.
Sent from my XT875 using xda premium
Great! Thats so good to hear you got it working. Its nice having all the options. If there is something I can put in the op to make things easier for ppl then post it on rootz and I will make the change.
48656C70206D6521
If possible, please post all questions and findings in the official thread so everyone can share there findings.
48656C70206D6521
Doubleshot Kernel v1.6
FIRST AND FOREMOST
**do this at your own risk**
READ FIRST
If you DO NOT own a VERIZON Galaxy Tab 2 7.0 SCH-I705 then DO NOT flash this! If you have not verified and flash this on a p31xx tab, something will break and I will not help you!
Features
Built from Samsung kernel source
1.52ghz, 1.62ghz or 1.70ghz Overclock versions!
init.d support
ADB root
Custom bootanimation.zip support
Governors
Interactive, Conservative, Powersave, OnDemand, Performance
Requirements
A *VERIZON* GALAXY TAB 2 7.0 SCH-I705
Root
Unlocked bootloader
CWM Recovery
Install
1. BACKUP!
2. Wipe dalvik cache
3. Flash in CWM Recovery
4. Reboot
5. Hit the THANKS button!
*I recommend using "System Tuner" from the Play Store.
Download v1.6 - 1.70ghz
a7f86b0afe3544e08c47b8e9a7315d9d
Download v1.5 - 1.62ghz
7c61153896e37b21bf43d6b128d10084
Download v1.1- 1.51ghz
49e8ad6378fd3eed4536b36e925a0b1b
Thanks
Scrosler for init.d and ADB root
All the others who've made rooting and modding Android possible!
Source
https://github.com/MrHyde03/android_kernel_samsung_espressovzw.git
Change Log
v1.6 2013-02-12
1.70ghz OC!
v1.5 2012-12-21
1.62ghz OC!
v1.1 2012-12-16
Initial Release
1.51ghz OC!
To Come
I will be adding more governors in the coming weeks.
This kernel should works on jb stock rom ?
Thanks a lot
Enviado desde mi GT-P3110 usando Tapatalk 2
fash99 said:
this kernel should works on jb stock rom ?
Thanks a lot :d
enviado desde mi gt-p3110 usando tapatalk 2
Click to expand...
Click to collapse
sch-i705 only!!
MrHyde03 said:
Features
Built from Samsung kernel source
1.5ghz Overclock!
init.d support
ADB root
Custom bootanimation.zip support
Governors
Interactive, Conservative, Powersave, OnDemand, Performance
Click to expand...
Click to collapse
NICE!
I just got my Verizon Galaxy Tab 2 7.0 and it already comes with the J1 rom and not the G3. I don't see anywhere on how to root this version of the rom. The only instructions to root is for the G3 rom. Appreciate any help. Thanks.
Sent from my SCH-i705 using xda premium
Follow step 1b in the root thread. You have to downgrade to g3 and then upgrade to j1 after.
Sent from my SCH-I535 using xda app-developers app
Kernel source?
Yes, the source Samsung released on their open source website.
Sent from my SCH-I535 using xda app-developers app
1026 seems to be the lowest clock speed i can set
I can get to 384mhz, but I have noticed the minimun settings don't stick very well, but the maximum settings stick like glue. I've also noticed this on my S3. I'm not sure whats going on to be honest. I'll see if I can dig into it in the next few days. For now, though, I've noticed that you have to kinda play around with the minimum settings until it sticks, but it will stick eventually.
Working on cm 10.1?
Sent from my GT-P3110 using xda premium
MrHyde03 said:
Yes, the source Samsung released on their open source website.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Guess I should have been more specific. Where's the link to your kernel source? It's a requirement on XDA.
cmenard said:
Guess I should have been more specific. Where's the link to your kernel source? It's a requirement on XDA.
Click to expand...
Click to collapse
Ah. Gotcha. I'll see if I can post it up today. Github keeps rejecting my push and I haven't figured it out yet.
tdawgg777 said:
1026 seems to be the lowest clock speed i can set
Click to expand...
Click to collapse
I'm using Kernel Tuner right now and it's working the best. Can set both cores independently or together. One thing I've notice though is go into settings and check "Prevent Changes from other apps". It says it's for HTC but it's working on my tab. If anybody has a good reason to not do so let us know :good:
Hi thanks for your great kernel.
I have two tablet 7p and 10.1p wifi it is possible for you to explain me or port this great kernel to tablet 10.1 wifi
.
I have Linux pc and if you help me for port this or create my kernel with your help.
Because forum tab 10.1 is dead ...
MrHyde03 said:
I'm using Kernel Tuner right now and it's working the best. Can set both cores independently or together. One thing I've notice though is go into settings and check "Prevent Changes from other apps". It says it's for HTC but it's working on my tab. If anybody has a good reason to not do so let us know :good:
Click to expand...
Click to collapse
i'll give kernel tuner a try
worked great thanks..
Sent from my SCH-i705 using Xparent ICS Tapatalk 2
I'm trying to push my source to github, but I keep getting this error:
error: RPC failed; result=22, HTTP code = 413
fatal: The remote end hung up unexpectedly
fatal: The remote end hung up unexpectedly
If I change it to SSH I get a "permission denied (publickey)" error... anyone have some advice? I'd like to get this pushed out...
MrHyde03 said:
I'm trying to push my source to github, but I keep getting this error:
error: RPC failed; result=22, HTTP code = 413
fatal: The remote end hung up unexpectedly
fatal: The remote end hung up unexpectedly
If I change it to SSH I get a "permission denied (publickey)" error... anyone have some advice? I'd like to get this pushed out...
Click to expand...
Click to collapse
Bro.. 1.5 is plenty. Any more then that ur asking for problems
Sent from my SCH-I535 using Xparent Blue Tapatalk 2
Hi all!
I've been trying to find the way of changing the governor's config and searched all this forum for help and I didn't find it..
So here I am.. Someone can please tell me how can I do it?
Thank you
Sent from my XT890 using xda app-developers app
Download SetCPU, CPU Master or any similar App out of Play Store. But don't use No Frills, it's not fully compatible with the i.
Gesendet von meinem XT890
Oh so it was just using an app.. Thankss
Sent from my XT890 using xda app-developers app
good
pancho2288 said:
Hi all!
I've been trying to find the way of changing the governor's config and searched all this forum for help and I didn't find it..
So here I am.. Someone can please tell me how can I do it?
Thank you
Sent from my XT890 using xda app-developers app
Click to expand...
Click to collapse
just now i asked the same and was recomended rom toolbox and its very good lots of other options too.
To quote myself, from my infiniROM thread:
arman68 said:
To switch to smartassV2 with sio, you can install this zip from recovery: View attachment 1872551 (if you want to experiment with other governors and schedulers, you can edit the init.d script inside the zip). The following zip will allow you to revert back to the default from recovery, in case things go horribly wrong: View attachment 1872552
Click to expand...
Click to collapse
The above solution is good if you want to set a permanent setting, or if you do not mind rebooting your phone whenever you change cpu governor and io scheduler. If you want to experiment without rebooting though, I highly recommend the free Voltage Control app; once you do not need it anymore, freeze or uninstall it, and use the init.d script instead.
Hi.
I didn't find where to share it so people can try it and give feedback or whatever...so I created this thread. I compiled franco kernel with the updated code for the wifi driver (same thing that was done here).
It also modifies libs and config files so do a nandroid backup in case you don't want to use it anymore (use any other kernel...including the original franco kernel) ... or you can use (you have to use[/B]) this to revert to stock driver and pure franco #134 kernel.
Anyway... flashable zip in attached files
Source is here
I just wanted to help so be cool.
And credit to the people that deserved it.... you know who..
Well since the wifi problem is fixed (I think)... I'm just sharing my personal build of franco kernel...it's franco kernel+faux sound+faux gamma control.
Enjoy
What version (date) of the Prima Driver does this Kernel Contain? BTW, currently testing
Just as a heads up I'm using jszaq 's motley version and it's not missed a beat in weeks. It's so awesome not to have to worry about missed notifications on WiFi, after waiting so long for crappy Google to fix it.
sigma392 said:
What version (date) of the Prima Driver does this Kernel Contain? BTW, currently testing
Click to expand...
Click to collapse
V3.2.2.2
Sent from my Nexus 4 using xda app-developers app
meangreenie said:
Just as a heads up I'm using jszaq 's motley version and it's not missed a beat in weeks. It's so awesome not to have to worry about missed notifications on WiFi, after waiting so long for crappy Google to fix it.
Click to expand...
Click to collapse
It works for me too... But I read motley's thread and apparently doesn't work for everybody... I hope that it works for most of the people so franco will include it officially.. But since it uses libs and other config besides the kernel I don't think he will
Sent from my Nexus 4 using xda app-developers app
OMG, it works! i don't get wifi slowdowns anymore
There is more updated prima drivers
https://www.codeaurora.org/gitweb/q...a.git;a=shortlog;h=refs/heads/caf-wlan/master
But for some reason all kernel developers at xda using 3.2.1
Sent from my Nexus 4 using xda premium
it works very well!!
Whit franco kernel r134 i have 13.5Mb/s down, 1.1Mb/s up whit 30Mb (DIOCSIS 3.0).
Now whit the this driver i have 30.1Mb/s down, 1.0Mb/s up.. it works great!
spadie said:
it works very well!!
Whit franco kernel r134 i have 13.5Mb/s down, 1.1Mb/s up whit 30Mb (DIOCSIS 3.0).
Now whit the this driver i have 30.1Mb/s down, 1.0Mb/s up.. it works great!
Click to expand...
Click to collapse
Check if the wifi optimization feature is ticked in android settings.... Mine deactivated when I installed it
Sent from my Nexus 4 using xda app-developers app
Can u make this is stuf for saber kernel please
Sent from my Nexus 4 using xda app-developers app
How to revert to stock driver. Could you please make zip file for reverting?
myqwerty said:
How to revert to stock driver. Could you please make zip file for reverting?
Click to expand...
Click to collapse
Reflash a new kernel.
Works really great job
Tapatalk
sigma392 said:
Reflash a new kernel.
Click to expand...
Click to collapse
Since it changes libs and other stuff you can't just simply flash a new kernel. Have to restore from a backup.
Edit: Forgot to report my results. My internet is 30/5 and with this new kernel I actually get 30/6.5 which is obviously a faster upload than my computer speed tests.
If I flash a new kernel, do the new wifi drivers and such go away?
Sent from my Nexus 4 using xda premium
ivanich said:
There is more updated prima drivers
https://www.codeaurora.org/gitweb/q...a.git;a=shortlog;h=refs/heads/caf-wlan/master
But for some reason all kernel developers at xda using 3.2.1
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
It's because the changes are not in the mainline yet... so they are still experimental.
leos0000 said:
Can u make this is stuf for saber kernel please
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Sorry but i did it for Franco kernel cause i use it and he doesn't want to mess with wifi fixes... you can ask saber kernel developer or someone who uses it
myqwerty said:
How to revert to stock driver. Could you please make zip file for reverting?
Click to expand...
Click to collapse
I added a flashable zip in OP to revert to original drivers
ManOnTheMoon said:
If I flash a new kernel, do the new wifi drivers and such go away?
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
The kernel changes I made and the wifi libs and config in rom side need to go together... so if you flash a new kernel only the files in rom side stay.... and your wifi will mess up... so use the revert zip to change kernel but you will lose the fix
Chomanator said:
Since it changes libs and other stuff you can't just simply flash a new kernel. Have to restore from a backup.
Edit: Forgot to report my results. My internet is 30/5 and with this new kernel I actually get 30/6.5 which is obviously a faster upload than my computer speed tests.
Click to expand...
Click to collapse
I poste it to fix the notification delay... it's a newer driver maybe they change more stuff the goal is to fix the notification delay on wifi