Related
Hi guys
Can any one tell me how to root nexus one 2.3.6 ,i have locked boatloader.
zahid
Try SuperOneClick
http://forum.xda-developers.com/showthread.php?t=803682
or unlock the bootloader, fastboot custom recovery and flash ROM of choice.
Try this
http://forum.xda-developers.com/showthread.php?t=1324227
Sent from my Nexus One using Tapatalk
Use this. I just rooted my stock 2.3.6 nexus using this method. Takes less then a minute once everything is downloaded. Just make sure to extract all the files into the same location as the adb.exe file. Usually its in android/platform-tools.
Good luck and let us know if you have any questions.
BTW it does not unlock you bootloader either!
http://forum.xda-developers.com/showthread.php?t=1324227
krazichinaman said:
Just make sure to extract all the files into the same location as the adb.exe file. Usually its in android/platform-tools.
Is that a compulsion that super one click must be in the same location as adb n sdk tools?
Cos i rooted my stock 2.3.3 using the same method last month
But had it in different directories c: n e:
Sent from my Nexus One using Tapatalk
Click to expand...
Click to collapse
guys thank you so much you all are genius ,today i ll try this method and let everyone know..
hi guys
thanks i finally rooted my nexus one thanks to all
Now question can i install a custom rom from ROM manager or i had to unlock my boatloader first?
zahidismaeel said:
hi guys
thanks i finally rooted my nexus one thanks to all
Now question can i install a custom rom from ROM manager or i had to unlock my boatloader first?
Click to expand...
Click to collapse
You're good to go. Just install a custom recovery
CWM or Amon Ra, you can install them via Rom Manger.
hi
I tried to install custom ROM but when phone reboot it stuck on "triangle android" seems first i have to unlock my boatloader.
Can you post me link..
It means that you didn't flash the file that removes stock recovery reinstaller - and stock recovery is reinstalled on stock ROM boot.
Reboot back to ROM, root again, this time when you reboot to recovery first time, flash the file. It's found in Nexus One Wiki, section "Recovery".
zahidismaeel said:
hi
I tried to install custom ROM but when phone reboot it stuck on "triangle android" seems first i have to unlock my boatloader.
Can you post me link..
Click to expand...
Click to collapse
Its not at all necessary to unlock the bootloader. Did u install custom recovery before flashing a custom rom? I think u skipped that step.
Simple and best way for starters like us is to
1.root via super one click root
2. Install rom manager from market and wid the help of that, flash clockworkmod(cwm) recovery.
3. Install Titanium backup from market and do a backup up of ur apps.
4. Choose the correct rom of ur choice by reading the OP and the thread.
5. Download it and install it via rom manager.
6. Before that back up your current rom and wipe the system,cache,dalvik cache.
Thats it, u r good to go. :thumbup:
This is how i did n doing good
PS: Am just a newbie, so if there's any mistakes in my steps pls correct me.
Sent from my Nexus One using Tapatalk
thanks Man its working,,,,,,
but i am little surprise i did the same like flashing clockworkmod(cwm) recovery first and then ROM..but it didnt work me at that time...strange... Anyways now its working i m now on MIUI ROM looks cool..
question,,, what the advantage of having boatloader unlock?and wat is its use...?
Does SuperOneClick works on Nexus One stock rom 2.3.6?
I went for it and it works. i now have root on my N1 stock 2.3.6!
Hi,
I tryed this ] DooMLoRD's Easy Rooting Toolkit [v4.0] and get this message, can anyone help me?
http://kepfeltoltes.hu/view/120901/r00t_www.kepfeltoltes.hu_.jpg
superoneclick gives almost the result...
whats this? How to do this through?! I'm disappointed and confused, please help!
thanks
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Thanks ✟
Moving to Q&A
I figured I would post this in a new thread so those who have abandoned hope will see it lol. The attached zip contains a HtcOMADM_SPCS from the 4.3 update with modified code and files to allow access to the API menu, and not cause vDM client crashes. I do not have a GSM sim yet, so I can't test to see if it actually unlocks the sim.
ONLY FOR DEODEXED ROMS
Flash in recovery and follow the steps here.
I see this has been thanked several times now...can anyone confirm it works?
i just have received my htc one ! I unlock & root it, and i'll try. Maybe tomorrow or next weekend
edit : so i've htcdev unlocked, installed twrp, and i'm installing insertcoin with modified files from the other subject just to see if it works, and if not i will try with your apks
It works with your apk !!! Thanks !! 3g speed in France with bad esn Sprint HTC one = working
Ive flashed your zip ,and i ran the app
worked, thanks
Hey guys. Any chance to link a working Rom with this mod. I've tried a couple with no luck.
Thanks...
liranbh7 said:
Hey guys. Any chance to link a working Rom with this mod. I've tried a couple with no luck.
Thanks...
Click to expand...
Click to collapse
lastnight i use this method http://forum.xda-developers.com/showthread.php?t=2491840
working 100%
kromoxs said:
lastnight i use this method http://forum.xda-developers.com/showthread.php?t=2491840
working 100%
Click to expand...
Click to collapse
thanks for the quick reply man, but i already managed to sim unlock it using this ROM: (Stock with goodies)
http://forum.xda-developers.com/showthread.php?t=2301672
and afterward flashed this file (HtcOMADM_SPCS.zip) through recovery .
thank you all!!!
Quick question, what gsm networks does this work on in the states. Only comments I've read are that gsm works outside of the states and not much luck here
Sent from my unknown using xda app-developers app
I'm running on the Cincinnati bell network. Data is NOT working but I haven't given up just yet. Yes it's a gsm network. Good luck to ya. I've read others using t-mobile also.
Sent from my HTCONE using xda app-developers app
which deodexed rom should be used ? i m trying with Stock rooted deodexed 3.04.651.2
please correct me if i m wrong..
if both the files are same ?
the main file is HtcOMADM_SPCS.apk which gets replaced,but the size is different 387kb @ http://forum.xda-developers.com/showthread.php?t=2534208
and 1.05mb @ http://forum.xda-developers.com/showthread.php?t=2491840
thanks in advance..
which should be preferred ?
shanusmarty said:
which deodexed rom should be used ? i m trying with Stock rooted deodexed 3.04.651.2
please correct me if i m wrong..
if both the files are same ?
the main file is HtcOMADM_SPCS.apk which gets replaced,but the size is different 387kb @ http://forum.xda-developers.com/showthread.php?t=2534208
and 1.05mb @ http://forum.xda-developers.com/showthread.php?t=2491840
thanks in advance..
which should be preferred ?
Click to expand...
Click to collapse
You need the one in post #1 of this thread.
It did not work.
I flashed the file and when I typed su in the terminal it didnt ask me to grant anything and when i wrote the following line the menu didnt pop up. What is the problem?
U need to root again.. flash su package thru twrp.. n try..
Sent from my SCH-I605 using Tapatalk 2
Thank you
Worked perfectly to unlock my HTC One,
tested with a Mexican sim (Telcel) and it worked.
Thank you.
Tried it on my Sprint running Viper One 3.5
At first, the Simunlock helper app didn't want to run because it claimed I wasn't running a Sense ROM, but ViperOne IS a sense rom.
I clicked on something else and tried to open the log file but it wasn't there, and when I pressed the back button, viola, it showed me the main screen, with Root, Sense, and Sprint all verified and green. It opened the hidden menu system, and I was able to press sim lock at the bottom of the list and it appeared to work. I haven't got a SIM card to try though, so I'll have to update this post later with a verified yes or no.
ayuda
woker-X said:
Worked perfectly to unlock my HTC One,
tested with a Mexican sim (Telcel) and it worked.
Thank you.
Click to expand...
Click to collapse
Im in mexico and want to use this in TELCEL but i have android 4.3 can you help me? what did u do to get it work?
jams90 said:
Im in mexico and want to use this in TELCEL but i have android 4.3 can you help me? what did u do to get it work?
Click to expand...
Click to collapse
What have you tried??
Anyway, these are the steps I followed.
1.- Unlock bootloader (I did it with the htc dev account).
2.- Install custom recovery (I used TWRP).
3.- Install SuperSU (Be sure to have the latest version, it won't work otherwise).
4.- Flash the custom ROM "Stock with goodies" (It is referenced in the first posts of this thread).
5.- Flash the file provided in the first post of this thread.
6.- Unlock SIM via terminal emulator (The steps for this are also referenced in the first post).
woker-X said:
What have you tried??
Anyway, these are the steps I followed.
1.- Unlock bootloader (I did it with the htc dev account).
2.- Install custom recovery (I used TWRP).
3.- Install SuperSU (Be sure to have the latest version, it won't work otherwise).
4.- Flash the custom ROM "Stock with goodies" (It is referenced in the first posts of this thread).
5.- Flash the file provided in the first post of this thread.
6.- Unlock SIM via terminal emulator (The steps for this are also referenced in the first post).
Click to expand...
Click to collapse
Exactly which Custom Rom did you used for your HTC ONE?
If also could you please send me the apn data from telcel that worked for you? I'm trying to help a girlfriend here any help will be appreciated.
This is my first time attempting this so I apologize for my newbness. I have unlocked the bootloader and rooted the phone. I loved the OP's zip file to the internal storeage of the phone, we to recovery and chose the install option in TWRP. Then I chose the zip file I placed on the internal storage and swipped to flash. It says sucessful but when the vDM client crashes every time still. Am I doing something wrong? The phone is stock rom on 4.3.
guys plz help me out plz
i have a xperia z c6603 model.. i have unlocked bootloader. i was installin CWM from http://www.editandroid.com/how-to-install-custom-cwm-recovery-in-sony-xperia-z-unlocked-bootloaders/
and what happened is that i was doing it and i entered the command that was fastboot flash boot boot.img... as the tutorial says that we have done it i unplugged cable and checked the recovery was installed but now im stuck on the boot as its a neverending loop and device restarts itself but does not boot normally to android.. with pink LED to start recovery
i can access recover but when i tried a lot of time and it didnt boot normaly i accepted the REBOOT SYSTEM NOW option and it had another option to fix SUPERSU which means root
plz tell me what to do im a noob plz.. the device cant even turn off other wise i wouldve use PC companion to restore phone and kindly tell me would i have root after clicking on FIX superSU which means ROOT....plzzz tell me what to do.. i know how to install custom ROm but dont know about flashing kenals or Flashtool thing plz plz tell me waht to
As you followed a guide that just ripped DooMLoRD's work from XDA, you most probably flashed the wrong kernel for your firmware, which is the cause of your problem.
Get the correct kernel from here, which is the source of the guide and files that website is using.
thanks for reply plz stick with me for a sec plz
kingvortex said:
As you followed a guide that just ripped DooMLoRD's work from XDA, you most probably flashed the wrong kernel for your firmware, which is the cause of your problem.
Get the correct kernel from here, which is the source of the guide and files that website is using.
Click to expand...
Click to collapse
Bro should i open fastboot folder and give the "fastboot flash boot boot.img" again????
plz tell me what to do...
i also have a backup of stock rom in my sd card...i did that backup right after this incident hapened to me...should i try restoring backup?
my phone can go in the fastboot mode
\
but PC companion is not restoring my phone either it say i have cutom software on it
another thing
kingvortex said:
As you followed a guide that just ripped DooMLoRD's work from XDA, you most probably flashed the wrong kernel for your firmware, which is the cause of your problem.
Get the correct kernel from here, which is the source of the guide and files that website is using.
Click to expand...
Click to collapse
yes you're are super RIGHT BRO... i flashed the 434 v5
plz guide me should i repeat whole process of installing CWM recovery... in the fastboot section...?
should i be using flashtool...i really dont know how to use it either...but whether that'll fix it...
is my device bricked or something??
I love you man
kingvortex said:
As you followed a guide that just ripped DooMLoRD's work from XDA, you most probably flashed the wrong kernel for your firmware, which is the cause of your problem.
Get the correct kernel from here, which is the source of the guide and files that website is using.
Click to expand...
Click to collapse
MAn You saved my life literally ILY man thanks a LOt.....
if there's anything i can do for you lemme know can i donate your website or something cux i'd really love to pal... thank you very very much
Sorry I didn't reply before. I was sleeping haha.
Happy to have helped. I don't accept donations, but you can donate to a charity of your choice if you like.
kingvortex said:
Sorry I didn't reply before. I was sleeping haha.
Happy to have helped. I don't accept donations, but you can donate to a charity of your choice if you like.
Click to expand...
Click to collapse
Somebody is in love with you King
after unlocking,rooting and installed custom recovery i installed a custom rom srom sense 5.
it didnt worked ,so i installed another custom rom the jmz sense 4+,it worked fine for me,also i was curious to install jmz kernel because as it says he could overclock up to 1.7 ghz ,things seems to work ok but i installed again the sense 5 srom,flashed the boot.img from jmz,i dont know why i did this then the wifi and bt stopped working for me...
any idea ?
Edit:
After relocking bootloader,flashing stock RUU everything is working normally and now im s-off and with sense 6 on my htc first !
astrit1995 said:
after unlocking,rooting and installed custom recovery i installed a custom rom srom sense 5.
it didnt worked ,so i installed another custom rom the jmz sense 4+,it worked fine for me,also i was curious to install jmz kernel because as it says he could overclock up to 1.7 ghz ,things seems to work ok but i installed again the sense 5 srom,flashed the boot.img from jmz,i dont know why i did this then the wifi and bt stopped working for me...
any idea ?
Edit:
After relocking bootloader,flashing stock RUU everything is working normally and now im s-off and with sense 6 on my htc first !
Click to expand...
Click to collapse
normally you flash any kernel and fix it
flash after reinstall rom!
Serupo said:
normally you flash any kernel and fix it
flash after reinstall rom!
Click to expand...
Click to collapse
Im afraid to reinstall it again because it can appears glitches again... And when i was on custom firmware i tried to recevert to stock kernel and it was the same thing,wifi & bt module didnt worked,now they both works on sense 6.0 4.1.2 jellybean,the only bug i have found is beats audio..i dont know ehat to do for it,but not a big deal,i love new look of os
Same issue
astrit1995 said:
Im afraid to reinstall it again because it can appears glitches again... And when i was on custom firmware i tried to recevert to stock kernel and it was the same thing,wifi & bt module didnt worked,now they both works on sense 6.0 4.1.2 jellybean,the only bug i have found is beats audio..i dont know ehat to do for it,but not a big deal,i love new look of os
Click to expand...
Click to collapse
Hello, i m facing same issue wifi isnt turning on after installing jmz rom on my htc first. Can u plz provide details what u have done to fix the issue. Keep in mind i m not much technical into android. Thanks
---------- Post added at 11:06 AM ---------- Previous post was at 10:57 AM ----------
sajid.qasmi said:
Hello, i m facing same issue wifi isnt turning on after installing jmz rom on my htc first. Can u plz provide details what u have done to fix the issue. Keep in mind i m not much technical into android. Thanks
Click to expand...
Click to collapse
Step by step guide needed. Thanks
sajid.qasmi said:
Hello, i m facing same issue wifi isnt turning on after installing jmz rom on my htc first. Can u plz provide details what u have done to fix the issue. Keep in mind i m not much technical into android. Thanks
---------- Post added at 11:06 AM ---------- Previous post was at 10:57 AM ----------
Step by step guide needed. Thanks
Click to expand...
Click to collapse
just wait a moment to find them and i will help you
restoring to stock
first of all you must know that this will wipe everything from your phone,so make a backup of personal data... you will need to download the RUU package which has the original stock firmware from this link:
http://www.androidruu.com/?developer=Myst
download this one because this can be s-off: RUU_MYST_UL_Cingular_US_1.08.502.1_Radio_1.15.40.00.13_2_10.64.40.33AL_release_316579_signed_2.exe
do you have installed the drivers and is your bootloader unlocked from htc dev?
of course it must be unlocked
1-reboot into bootloader
2-open cmd and type: fastboot oem lock
this will relock your bootloader so you can proceed to install the RUU (if you dont know fastboot comands ask me to send you the files and give you further instructions)
3-now its time to grab the rom.zip from RUU. run the file which you downloaded and i will tell you 2 ways to get the rom.zip
*the first one is to find it to temporary files,pres the windows key + R and type %temp% and there are to many folders,but in one of them you will find it
*the second one is from task manager,open RUU.exe and open taske manager (ctrl+shift+esc),go to applications,right click on ruu ,click on go to process,it will direct you to sth highlighted and again right click on it,click on open file location and here you are at the folder where is located rom.zip . copy it at the folder where you have fastboot.exe and close the RUU application
4-now is time to install the rom.zip,type in cmd:
fastboot oem rebootRUU
(the screen must show htc logo and a dark background)
5- the final step is flashing zip,type again in cmd:
fastboot flash zip rom.zip
(the cmd will show some automated scripts and after a couple of minutes your phone will be completly reverted to stock)
6-if you want to s-off and install a custom rom,first head up to htcdev.com to unlock your bootloader,download moonshine s-off for htc first and it will s-off your htc and root it,install a custom recovery and choose your favorite rom)
Sorry for my bad english,but im trying to do my best !
For any problem contact me !
If i helped you,press the thanks button
New Ota Updat for 510 desire Cid roger !
the calculator is back in this updat
download
https://drive.google.com/open?id=0B2W9YtBFD7hhS0pQbFJ0SlB6Y3c
Anyone has Rogers stock rom, I need it so badly. Thanks in advance.
phantomhouse said:
Anyone has Rogers stock rom, I need it so badly. Thanks in advance.
Click to expand...
Click to collapse
A simple search here on the xda forums would help you find that pretty quickly... Search for HTC Desire 510 Rogers.
phantomhouse said:
Anyone has Rogers stock rom, I need it so badly. Thanks in advance.
Click to expand...
Click to collapse
You can do the ota updat without stock rom if you not use custom rom
First Relock the bootloader
Extract the files from ota updat you ll find firmwar.zip
Take the firmwar.zip and flash the phone like RUU
Restare the phone
Apply the ota
Thats all
After you can unloock the bootloader and flash recovery
Samy6699 said:
You can do the ota updat without stock rom if you not use custom rom
First Relock the bootloader
Extract the files from ota updat you ll find firmwar.zip
Take the firmwar.zip and flash the phone like RUU
Restare the phone
Apply the ota
Thats all
After you can unloock the bootloader and flash recovery
Click to expand...
Click to collapse
He isn't asking to do an OTA he's asking for a specific rom most likely because his got messed up so none of anything you just suggested pertains to his question!!!
Ah ok so im sorry !
i was thinking he want to back to stok rom to apply the new updat .
I have pure stock bakup of my 510 rogers i don't know if it ll help or no ,so if it help i can upload it .
Samy6699 said:
Ah ok so im sorry !
i was thinking he want to back to stok rom to apply the new updat .
I have pure stock bakup of my 510 rogers i don't know if it ll help or no ,so if it help i can upload it .
Click to expand...
Click to collapse
You should upload that somewhere because there's not one available for the HTC Desire 510 the one I did find the link didn't work anymore.
Samy6699 said:
Ah ok so im sorry !
i was thinking he want to back to stok rom to apply the new updat .
I have pure stock bakup of my 510 rogers i don't know if it ll help or no ,so if it help i can upload it .
Click to expand...
Click to collapse
If you can upload somewhere that will be great and helpful, I believe not just me need it. By the way, my radio: 1.101.1372.19.0822 and OS: 1.11.631.2.
My Phone stopped on HTC logo after update the system through the phone, I tried to use RUU to flash many ROM and it didn't work, I found out later this phone's CID is Rogers so I think the stock ROM will work if I use RUU to flash it.
Thank you all for your help and advice.
my firm os is 1.19.631.3 and radio is .101.1372.19.1121
i think your firm is little old ,so you have to flash the firm befor the stok backup
here the firm
https://drive.google.com/file/d/0B2W9YtBFD7hhM0pmOEU5T3FfOEk/view?usp=sharing
and here my stock backup
Extrat and put the backup folder in twrp and restore
https://drive.google.com/file/d/0B2W9YtBFD7hhcDhQQXJqQTNNZTA/view?usp=sharing
hop it help
Hi idk if I'm just blind an not seeing it but what carrier is this update for?
Ubiquitous_22 said:
Hi idk if I'm just blind an not seeing it but what carrier is this update for?
Click to expand...
Click to collapse
Yeah you must be blind alright, it's for Rogers! Lol
Thank you sooo much Samy6699, you're the man. I'll try them later when I have time.
phantomhouse said:
Thank you sooo much Samy6699, you're the man. I'll try them later when I have time.
Click to expand...
Click to collapse
you are Welcome ,,, when you try just say for us if it work or no .
Samy6699 said:
my firm os is 1.19.631.3 and radio is .101.1372.19.1121
i think your firm is little old ,so you have to flash the firm befor the stok backup
here the firm
and here my stock backup
Extrat and put the backup folder in twrp and restore
hop it help
Click to expand...
Click to collapse
Finally I got my phone works again. Thank you all guys.
I downloaded Samy6699's firmware and backup, flashed firmware first then restored Samy6699's backup file by using TWRP.
After reboot I got the phone worked with Samy6699's data, even the screen lock gesture was also shown up, so I rebooted the phone to boot loader and did the factory reset, ok my phone was reborn like new. As long as I connected to the Wi-Fi I got system update reminder. After proceeded to install the update, my phone fully recovered with newest system update running now.
Thanks again. I'm a happy man after couple weeks struggling to numerous failing attempts.
phantomhouse said:
Finally I got my phone works again. Thank you all guys.
I downloaded Samy6699's firmware and backup, flashed firmware first then restored Samy6699's backup file by using TWRP.
After reboot I got the phone worked with Samy6699's data, even the screen lock gesture was also shown up, so I rebooted the phone to boot loader and did the factory reset, ok my phone was reborn like new. As long as I connected to the Wi-Fi I got system update reminder. After proceeded to install the update, my phone fully recovered with newest system update running now.
Thanks again. I'm a happy man after couple weeks struggling to numerous failing attempts.
Click to expand...
Click to collapse
How do I download this rom?
mur1taza said:
How do I download this rom?
Click to expand...
Click to collapse
If you read the first page you'll find the links.. You're on the 2nd page.. scroll to the bottom or top and tap page 1.
MrMike2182 said:
If you read the first page you'll find the links.. You're on the 2nd page.. scroll to the bottom or top and tap page 1.
Click to expand...
Click to collapse
I tried the two links, but its telling me I need access.
Hi do you still have the stock backup and firm ware for Rogers