I Have created a CM7 rom for rooted 621 and it should a lot easier to use now that I have tested personally and everything works as it should no need for gapps as it has vendor.apk in it and it will update to playstore.
Flashing Instructions
1:Back-up always
2:full wipe
3:install rom via CWR or bootstrap
4:Gapps arent needed but you may flash just to be comfortable
5: reboot
6: leave me feedback
7: enjoy
Downloads
Rom: http://www.4shared.com/zip/PvWul1cI/KiladarsCM7GBKERNEL.html?
Gapps: http://www.4shared.com/zip/tDblkDjI/gapps-gb-20110828-signed.html?
Known Bugs:
Settings does not open working on it right now.
let me know what you guys think.
change log:
Settings updated should work now
I Have finally fixed the settings
will this work on gb.605?
Sent from my DROID RAZR using xda premium
I believe it should. I only have my 621. Flash at your own risk.
Sent from my DROIDX using xda app-developers app
ok I'll flash later then thanks
Sent from my DROID RAZR using xda premium
BADDINOROX99 said:
ok I'll flash later then thanks
Sent from my DROID RAZR using xda premium
Click to expand...
Click to collapse
If your scared that your phone may brick or boot loop remember to back up and if you need me to i can find you a tutorial to unbrick your device just for comfort
Kiladar said:
If your scared that your phone may brick or boot loop remember to back up and if you need me to i can find you a tutorial to unbrick your device just for comfort
Click to expand...
Click to collapse
I can't flash it yet because my computer is in the repair shop and I never do anything risky with my phones unless my computer is nearby
Sent from my DROID RAZR using xda premium
Okay. I wonder if anyone has tried this yet.
Sent from my DROIDX using xda app-developers app
I hope so it looks promising
Sent from my DROID RAZR using xda premium
Well Im very new at modding Droid X, but I have an important question...
Is the hdmi fully working?
Or is there any rom which make it work as it should?
I mean something like a mirror.
Thanks!
Downloading Now. I just hope it's for the rooted .621 Non-Milestone hack. The Milestone hack (for root) is .604.
Sent from my DROIDX using xda premium
Update:
First I tried it without gapps. Everything booted fine, but there was no market nor would accounts/ sync let me add Google account.
So, I rebooted into recovery, which worked fine, and flashed gapps.
This time on boot, I actually got the Droid X welcome screen, was able to put in Google info, and market initiator ran and updated.
After that everything worked fine.
Tested Bluetooth, Messages, Gps and Calls. Didn't get chance to try Wifi yet, but I'm sure it works since everything-else does.
The only thing that Would be better is an updated Superuser. The 1 included will NOT update SU Binary. I think it's the old edify binary. Even by updating Superuser in the market WON'T help. Although an easy fix is to get RootUninstaller and uninstall Rom Superuser, then download new 1 from the market and install.
Keep up the hard work. Nice Rom.
Finally, does this works for any other gb kernel besides .621?
Anybody please tell us!
Nope, but maybe yes
BADDINOROX99 said:
will this work on gb.605?
Sent from my DROID RAZR using xda premium
Click to expand...
Click to collapse
Nope, but I may have a bad download as I forgot to check the Md5 sum before I flashed. Install was aborted. I can't try again right now because I have another phone to flash and have to go to bed early tonight.
And thank your for the review I've been waiting for a review like that I've created a couple roms and no one has have gave me so much input
Sent from my SGH-i917 using XDA Windows Phone 7 App
No prob Kiladar. I think if someone is going to comment on someones work, they should at least review it and be as informative as possible. It makes it easier
on the devs to look at potential probs/fixes too.
Oh yea, I also got to looking into your system/app folder in your zip. The vending.apk is Not in there, which i would say is why I had to flash the gapps. Just wanted you to know.
Also there is no "boot.img" (which is kernel right?) in the new dwnload.
Right, I will update OP saying to flash gapps rather then say not needed
Sent from my SGH-i917 using XDA Windows Phone 7 App
Beanerman said:
Downloading Now. I just hope it's for the rooted .621 Non-Milestone hack. The Milestone hack (for root) is .604.
Sent from my DROIDX using xda premium
Update:
First I tried it without gapps. Everything booted fine, but there was no market nor would accounts/ sync let me add Google account.
So, I rebooted into recovery, which worked fine, and flashed gapps.
This time on boot, I actually got the Droid X welcome screen, was able to put in Google info, and market initiator ran and updated.
After that everything worked fine.
Tested Bluetooth, Messages, Gps and Calls. Didn't get chance to try Wifi yet, but I'm sure it works since everything-else does.
The only thing that Would be better is an updated Superuser. The 1 included will NOT update SU Binary. I think it's the old edify binary. Even by updating Superuser in the market WON'T help. Although an easy fix is to get RootUninstaller and uninstall Rom Superuser, then download new 1 from the market and install.
Keep up the hard work. Nice Rom.
Click to expand...
Click to collapse
wifi works just fine with it, and I agree bout the updated superuser since you cant uninstall the one you have with it which means you also cant update to the new superuser because they are different volumes but over all nice ROM.:good:
thelangosta said:
Nope, but I may have a bad download as I forgot to check the Md5 sum before I flashed. Install was aborted. I can't try again right now because I have another phone to flash and have to go to bed early tonight.
Click to expand...
Click to collapse
I had it working on mine but my .605 was the .621/.605 deodexed hacked version cause I was on the .621 before I did the work around on the magic 5 route, originally I did the .604 work around but it should work on the .605 stock rooted, but then again I was also running the kernel for the .621 sooooo if the kernel is the key for running it maybe you cant.
Try another download, maybe you did get a bad DL
Other issues with phone
mbm262 said:
I had it working on mine but my .605 was the .621/.605 deodexed hacked version cause I was on the .621 before I did the work around on the magic 5 route, originally I did the .604 work around but it should work on the .605 stock rooted, but then again I was also running the kernel for the .621 sooooo if the kernel is the key for running it maybe you cant.
Try another download, maybe you did get a bad DL
Click to expand...
Click to collapse
I tried this again but, I think the real problem is with my microSD card. I have subsequently tried to flash other roms and have had other aborts as well. I know that the md5's on those checked out. I was able to flash a cm9 based rom and got it set up just fine. All this from the same card on the same phone. Sooo I am attempting to format the card just in case I have bad sectors or something.
Luckily my DX is no longer activated and just keeps me from killing my SGS3 with flashes.:silly:
thelangosta said:
I tried this again but, I think the real problem is with my microSD card. I have subsequently tried to flash other roms and have had other aborts as well. I know that the md5's on those checked out. I was able to flash a cm9 based rom and got it set up just fine. All this from the same card on the same phone. Sooo I am attempting to format the card just in case I have bad sectors or something.
Luckily my DX is no longer activated and just keeps me from killing my SGS3 with flashes.:silly:
Click to expand...
Click to collapse
I hear ya, I had the same prob with sd card so i formatted mine as well, problem was still there though. whenever i tried to install a rom from sd card via rom manager the problem was i kept getting the message saying waiting for sd cart to mount then it would say error bla bla bla sending log file to cwm ect ect ect.... i dont know exactally how i fixed that, all i know is i installed another rom, like cm7 or cm9 for instance and after that whenever i went to back up rom it worked fine ever since.... maybe something flashes over correcting the sd card problem when you install a rom... I know rom manager checks to verify the marker on sd card and thats what your problem is I believe.
Try doing this, try installing a rom cm7/cm9 without making a backup (i know you could lose everything if it fails but its the only way i know that fixed mine) after you have installed cm7/9 go to rom manager and hit the Backup Current Rom it should reboot you to cwm recovery and make an auto backup, if it does this without throwing up the waiting for sd card to mount error stuff and it runs the backup program and then reboots you it should fix your sd card problems.....
Review this rom
this is by far a ROM with the least lag by far i tried liquid ICS and plenty others don't know what it is but the lag is really minimal runs really smooth i only have this for like 3 hours but will update soon
pls hit thanks if i helped
Related
First and foremost I take no credit for anything contained in this ROM. I have taken bits and pieces from various ROMs I like and rolled my own.
The base is Binny's stock ROM.
LauncherPro from unrevolved by ozzeh
Has Both HTC and Android Music apps (in case someone, like me, prefers the old one)
Rosie and All Rosie widgets removed
WiFi Tether
TouchFlo port from Samsung included (choose launcher for yourself)
Again, all credit to the Devs listed above. I am no Dev myself, only a chef cooking up something to my own liking and thought I would share.
Anybody wanna test for me?
Download here
Installation...
Copy TouchOfPhotons-v1.zip to your SDCARD and reboot into Clockwork recovery. Then Install Zip and Choose Zip from SDCARD.
Be sure to take a Nandroid Backup and WIPE FIRST!
So far everything seems to be working fine for me...WiFi, BT, etc...
I would recommend Hydra's Undervolt with Wireless-N kernel here. This just needs to be installed like any other zip using Clockwork recovery.
Also I would recommend the MultiTouch Keyboard DANESHM90 managed to pull from the Droid-X here. This can be installed with Astro or an equivalent of your choice.
Thanks to all in the community. I am glad to be a part of it!
UPDATE.... Kernel link above may not work consistently so I am attaching the zip.
For those requesting it, I am attaching the TouchFlo Launcher. Just install via Astro or similar.
UPDATE - 7/7 --- Thanks to bowtiedeuce for pointing out the fix scuccia found for the Facebook constantly syncing issue. I am attaching that patch here (full credit to him, of course). Just install it like any other zip from your sdcard using clockworkmod recovery (install over your current setup, no wipe) and it should resolve the sync issue. Future releases will not have this bug.
No screenshots? It seems like most of the android roms have no screen shots.
I'm downloading it right now. I'll post feedback
Sent from my HTC Incredible
Bxsteez said:
No screenshots? It seems like most of the android roms have no screen shots.
Click to expand...
Click to collapse
Yeah,
Sorry about that. Was headed out the door and wanted to get something up for you guys before I left.
Anywhoo, here are some screenies. You can see I'm using TouchFlo primarily.
Oh, and the MT keyboard I provided a link to...
BTW....
The Live Wallpapers work great with the TouchFlo launcher.
I think I'm going to have to try ,this sounds great thank you looks good to
The rom is actually really nice an smooth. But its just not for me. I do recommend to at least try this rom. Good work man keep up the great work.
Sent from my Droid Incredible
I'm loving this ROM! Just got everything set up on it...
Couple things though... I'm having a hard time pushing a custom bootanimation.zip to /data/local
I had no problem doing it on a just a plain rooted Inc, but I can't with this...
Another would be requesting to get the 2.1 lock screen and not the HTC one... Thanks! Awesome work, keep it up!
each time i download this file ROM and i try to install it, i get an error when it is trying to write to BOOT that says E: No Room Left on Device, failure at Line 394. Has anyone else seen this and if so, have they figured out how to fix it? I have wiped the boot partition and completely formated my whole system. Still the same error, i also redownloaded the file 3 times and still the same issue.
ejlax said:
each time i download this file ROM and i try to install it, i get an error when it is trying to write to BOOT that says E: No Room Left on Device, failure at Line 394. Has anyone else seen this and if so, have they figured out how to fix it? I have wiped the boot partition and completely formated my whole system. Still the same error, i also redownloaded the file 3 times and still the same issue.
Click to expand...
Click to collapse
That's the first I'm hearing of this. Can anyone else confirm?
Sent from my ADR6300 using XDA App
Working great here, do far. I used ROM Manager for the install.
I will be checking it out today.
Great cooking!
Sent from my ADR6300 using XDA App
i am not really a nUbcake either...so that is making me kinda mad. I even messed with the update-script file to see if i could comment out the line that was erroring out, but it was to no avail. Could someone post a nandroid backup of the rom that i could try?
to clarify it is giving me an error saying "Error writing to Boot"
EDIT: got it working by removing the write_raw_image line at the end of the update_script
taypotts said:
I'm loving this ROM! Just got everything set up on it...
Couple things though... I'm having a hard time pushing a custom bootanimation.zip to /data/local
I had no problem doing it on a just a plain rooted Inc, but I can't with this...
Another would be requesting to get the 2.1 lock screen and not the HTC one... Thanks! Awesome work, keep it up!
Click to expand...
Click to collapse
I just pushed the bootanimation.zip from the DroidX to /data/local/ and it worked fine. What animation are you trying to push?
Sent from my ADR6300 using XDA App
The kernel link is not working, anyone know why I got error ?
That's strange. I'm getting an error trying to use that kernel link on my PC but if I click it on my phone (using the XDA app) it downloads. I'll try to get a mirror up.
EDIT - Actually just attached the kernel to the OP.
Sent from my ADR6300 using XDA App
Using this ROM with the Droid-X boot up sound and animation and the undervolt-N kernel. Very nice! My favorite so far and I have tried them all.
Thanks photonmedia!
Im had the same issue as ejlax did. However after the reboot everything seems to be there. Is there anything that didnt install after that error?
pbchris said:
Im had the same issue as ejlax did. However after the reboot everything seems to be there. Is there anything that didnt install after that error?
Click to expand...
Click to collapse
IF anything, I would says possibly the kernel (based on the error he says he got), but I would recommend you use the kernel attached in the OP anyway, so....
Really I don't know why you two are getting those errors and not the others who are testing, though. You are wiping before you install, right? Always the best practice: Nandroid Backup + Wipe.
I've been using it for most of the day - no issues. Phone, Google Voice, SIP phone, BT - looks flawless, so far...
Sent from my ADR6300 using XDA App
photonmedia said:
I just pushed the bootanimation.zip from the DroidX to /data/local/ and it worked fine. What animation are you trying to push?
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
That's the same one I'm trying to use.. I'm not sure.. I was able to do it the same way with just stock root, but it won't take now... can you tell me each step that you did to do it? Thanks!
Yeah it certainally seems to be working better as now I can backup and restore where as b4 it was a gamble usually lost. It looks nicer too. Check it out n let me know wut u think
Sent from my Rooted HTC ThunderBolt using XDA App
Not sure why you couldn't backup and restore....
Clockwork had problems for a few days after launch but has been fixed for awhile now.
its been working just fine for a while now.
Charging while the phone is off has also been fixed in 3.0.2.5
Mine has been working fine for awhile now.
3.0.2.5 is working on Tbolt?
Instead of going into clockwork it would put me in bootloader and recovery option just rebooted bootloader. Anyone else experience this?
nevermind.....Working just fine now
davezaff said:
3.0.2.5 is working on Tbolt?
Instead of going into clockwork it would put me in bootloader and recovery option just rebooted bootloader. Anyone else experience this?
nevermind.....Working just fine now
Click to expand...
Click to collapse
No problems here with 3.0.2.5. Try flashing an old one and then reflash 3.0.2.5.
Sent from my ADR6400L using XDA App
Not talking bout CWR, ROM mgr. I wanted to choose n manage backups w/out scrolling thru CRW n ROM mgr didn't always save n I couldn't rename ... Just was a hassle
Sent from my ADR6400L using XDA App
I've run into a problem with Rom Manager. I had it installed on my Incredible before and it worked fine. Well now I've switched to the Thunderbolt and re-downloaded through the market. My problem is that it still shows Incredible rom's, not Thunderbolt rom's. Any ideas how to fix this?
Mystery252 said:
I've run into a problem with Rom Manager. I had it installed on my Incredible before and it worked fine. Well now I've switched to the Thunderbolt and re-downloaded through the market. My problem is that it still shows Incredible rom's, not Thunderbolt rom's. Any ideas how to fix this?
Click to expand...
Click to collapse
I just had this problem...all you need to do is use a file manager and navigate to clockwork folder and delete the settings file in that folder. Might have to reinstall afterward.
Sent from my ThunderBolt using XDA App
quick question about rom manager
newbie question.
does rom manager back up the current kernel? if i flash a different kernel, will i be able to return it to the previous if i dont like it?
I figured we needed a thread to discuss the BootManager app.
First, big thumbs up to GFlam & Conap for this app! I used Conap's CELEB CM Roms on the Eris for a long time.
Now:
They have a User Manual on their site.
What does it do? You keep your rom on the phone, and you can add up to 4 more on your SD card. You use the app's menu to select which one you want to boot into next.
What is it? it is an apk you can get from the market. It lives on your phone. It doesn't mess with Clockwork and such.
What's the catch? There is something you have to pay attention to...It requires a connection to the market to verify it's authenticity. So, whenever you add a new rom, you need to connect it to the market...the trick: you need to flash gapps right after you flash a rom before you boot into it.
What If I forgot to flash gapps?!? No big deal. If you boot into a rom you installed that doesn't have the market, the BootManager app won't work, so you can't use it to boot back into another rom. They have a solution - boot into recovery and flash the "update.zip" located in the bootmanager>phonerom folder on your sd. Then your phone will reboot into your internal phone rom.
What's the catch, part 2? Some roms have custom scripts that run when they boot, so they don't play well, especially when installed on the SD card.
What else do I need to know? Rom installs take longer. After installing, the roms on the sd card do not lag. You can back up the roms that you install through the app.
This is a dream for people who want to play with nightlies or try a bunch of roms, but need their old-reliable come Monday morning. Check it out!
There is more discussion on this thread: http://forum.xda-developers.com/showthread.php?t=1189459
Disclaimer: I have no affliliation with Init 2 Win It. I just love this app.
I'll start with a question, too. I put BAMF3.0 rc 4.9 in an SD slot. When I boot in, everything works except Titanium Backup can't find root. Anyone else have this problem?
strongergravity said:
I'll start with a question, too. I put BAMF3.0 rc 4.9 in an SD slot. When I boot in, everything works except Titanium Backup can't find root. Anyone else have this problem?
Click to expand...
Click to collapse
Interesting. I'm having a similar problem with MyBackup Pro. The app would request SU permission but then it never acknowledged that it had it. I also had BAMF 3.0 Rc 4.9 running off SD
When I boot into miui from cm7 it won't connect to my wifi to let me authenticate my rom manager
Sent from my ThunderBolt using XDA App
stayin100 said:
When I boot into miui from cm7 it won't connect to my wifi to let me authenticate my rom manager
Click to expand...
Click to collapse
I haven't tried the MIUI yet. It might be another with a custom boot script.
You could try to install it as the internal phoneROM and see if it works. If it doesn't you'll need to restore a nand backup.
Good luck, should you choose to accept this mission. This post will self-destruct in 3...2...1...
ok so maybe someone can help me. im trying to flash CM7 and i flashed it and forgot to flash the GAPPS thing before a reboot. i got back into my original rom and im ready to try it again. i have CM& ready to flash, but how do i flash GAPPS before the reboot? do i do the flash of GAPPS from within bootmanager, rom manager, or hboot? thanks!
Flash gapps through bootmanager just like the rom, in the same slot. Dont wipe anything.
Sent from my Tablet using XDA Premium App
strongergravity said:
Flash gapps through bootmanager just like the rom, in the same slot. Dont wipe anything.
Sent from my Tablet using XDA Premium App
Click to expand...
Click to collapse
worked perfect. now do i flash kernels like imoseymons the same way? overwrite the rom slot?
[email protected]|ice said:
worked perfect. now do i flash kernels like imoseymons the same way? overwrite the rom slot?
Click to expand...
Click to collapse
Yep. The same way.
Remember to rename the slot to help you remember what you have.
strongergravity said:
Yep. The same way.
Remember to rename the slot to help you remember what you have.
Click to expand...
Click to collapse
worked out perfect, thank again for your help.
[email protected]|ice said:
worked out perfect, thank again for your help.
Click to expand...
Click to collapse
That's why I'm here.
disappointed that the synergy nightlies flashed to a slot put me in a boot loop. but was excited that all i had to do to fix it was flash the update.zip under bootmanager/phone
Maybe I'm missing something but where can I find the gapps zip/ every time I try to boot from the app, its telling me either no Rom installed or no image found
I installed all 3 versions of the recently leaked GB ROM using bootmanager and interesting NONE of them will boot up. Best I can tell from adb logcat is that the ROM does a memory test and the wrong memory type is returned causing a boot loop at that point.
Smells like a bit of copy protection testing going on.
Yea something's not working right with the app... I can't get any Rom to install.....
Sent from my Desire HD using XDA Premium App
A lot of the Sense roms fail. I have Monolith running fine.
Hey there, just wondering of anyone else is having the problem of Sd card space going into limbo if the ROM install doesn't go well (i'm talking the install or back up glitches and doesn't finish, not it actually finishing and getting a boot loop. I've tried wiping cache/dalvik cache, all the cleaning functions within the app. Deleting the slots and wiping the slots didn't work either. Like I said it seems to be in limbo, and don't feel like moving all my data off my card and reformatting every time this occurs. Any ideas?
Hey guys,
I love this app. I also had some problems but now I have Gingeritis as my phoneRom and switch between SHIFTS3NS3 and BAMF which are all gb roms.
The trick I found was that if it doesn't load the first time keep trying, it took me about two tries to load SHIFTS3NS3 and about 3 for bamf. Make sure you use ext2.
Also make sure your phone stays awake.
If you have an issue email the Devs they responded to me with in 10 min of the email.
Great app
Sent from my bad ass Thunderbolt with Gingeritis 3D VIII
Delete the installed roms slot via Bootmanager, rebooted and try again
Sent from my bad ass Thunderbolt with Gingeritis 3D VIII
I uninstalled the old version of safestrap, then installed the new version. I can do everything just fine (install, wipe, etc) but when I try to boot from the ROM slots, the phone just sits at a black screen.. I tried flashing Eclipse 3.0 and nothing happens.. help???
Sent from my DROID3 using xda app-developers app
Well eclipse 3.0 hasn't worked for me. The latest cm10,aokp,and aosp boot for me as well as mavrom 4.5 and axiomcs 1.0. Have u tried any other roms aside from eclipse?
Sent from my XT862 using xda app-developers app
Don't think eclipse works with new Safestrap. I have tested CM10, AOKP, AOSP, and Steel Droid. Those 4 all are "working".
Steel Droid is the most stable one i have tried so far, CM10, AOKP and AOSP all lag for me.
Hey guys,
New to Droid 3/ Milestone 3 World here.
I just bought one, actually with the 5.2.390.XT860.Brasil.en.BR version.
I'm not exacly new to flashing roms, and recoveries, but in this case I'm a little confused. Is it possible to use SafeStrap on this one? Or better go for an older version of it?
Thanks in advance.
@Munckster, as long as it is rooted you can install safestrap 3.04 and try if custom roms work for you?? but make sure you have the correct SS3 version!!
bArAbAts said:
@Munckster, as long as it is rooted you can install safestrap 3.04 and try if custom roms work for you?? but make sure you have the correct SS3 version!!
Click to expand...
Click to collapse
I was thinking about trying... Maybe during the weekend..
Thanks for the advice, man!
I took my phone back to stock (from an oldish CM9 that had been working reasonably well for me for some time) so I could install SS3. Made the mistake of letting the phone OTA update itself and then had to find a new root hack before I could get SS3 installed.
Unfortunately the OTA update has messed with the radio, as reinstalling the CM9 I've used for months gets a system where the phone app just crashes.
The kexec cm9 on hash code's download site results in a black screen for me. I have to pull the battery to get the phone back. Funnly enough the old CM9 does boot - and every thing works except the phone.
The latest CM10 does every thing I want (I can live with out the camera) BUT I can't receive calls, the phone app crashes. (But I can MAKE calls!).
This is on GSM BTW, not CDMA where I live.
So i'm busted back down to the 'stock' OS so I can use my phone as a phone
And as a new XDA user I can't post my bug report in the developer thread.
Well,
I installed the 3.0.5 version. Works like a charm! The easiest to use recovery that I ever use.
But the question is: Is it safe to downgrade it?
Sorry about the dumb question.
SS3 can be un-installed pretty easily. Boot your 'stock' OS, then use the SS3 app to remove the 'hijack' and then reboot again. No SS3. Just remember to do it from the 'stock' OS and not one of the others.
Don't do what I did with SS2 - from a non stock OS, remove SS and reboot. Ended up with a phone that never finished booting before it rebooted. Fortunately the emergency recovery mode built into the phone worked to recover it.
matthewgeier said:
The kexec cm9 on hash code's download site results in a black screen for me. I have to pull the battery to get the phone back. Funnly enough the old CM9 does boot - and every thing works except the phone.
The latest CM10 does every thing I want (I can live with out the camera) BUT I can't receive calls, the phone app crashes. (But I can MAKE calls!).
This is on GSM BTW, not CDMA where I live.
So i'm busted back down to the 'stock' OS so I can use my phone as a phone
And as a new XDA user I can't post my bug report in the developer thread.
Click to expand...
Click to collapse
Is the issue you're having that when you're speaking to people on the phone you can't hear anything and they can't hear you? Cause on CM9 there should be no issues with using it as a phone as long as you don't enable bluetooth ever or use buttons on a headset connected to your phone. I haven't tried CM10 yet so I wouldn't know too much about that. Just for some extra info to save your time do not flash Liberty or Eclipse, they don't seem to work. The newest Maverick works fine.
matthewgeier said:
SS3 can be un-installed pretty easily. Boot your 'stock' OS, then use the SS3 app to remove the 'hijack' and then reboot again. No SS3. Just remember to do it from the 'stock' OS and not one of the others.
Don't do what I did with SS2 - from a non stock OS, remove SS and reboot. Ended up with a phone that never finished booting before it rebooted. Fortunately the emergency recovery mode built into the phone worked to recover it.
Click to expand...
Click to collapse
I was going to try from the stock.
I am much more familiar with clockworkmod.
Anyway, thank you for the advice
Sent from my XT860 using xda app-developers app
It appears that the package is broken. For the time being I have no way of remaking it. I hopefully soon will be able to make it again.
The other day I managed to get my hands on a UK ATRIX that was still running the official 2.3.4 rom (T-Mobile I think) so I stuck ROM Factory on it and made a fruitcake of it for your enjoyment.
As always with custom ROMs I am not responsible for anything you do to your device, you don't have to flash this if you don't want to!.
Also this is the first time I have used Rom Factory to do anything and I am completely unable to test it as the phone I made it from has an locked bootloader (does this matter?) so again flash with caution.
Features:
Rooted
No Webtop (Sorry )
Up to date Apps including super user
Here's a mirror on 4shared if anyone needs it
http://www.4shared.com/zip/bQT_PsE_/Tmoukblur.html
Sent from that Atrix.
I would like more information about this rom. thank you
What more do you need? It's a prerooted stock UK ROM. Plain and simple.
ravilov said:
What more do you need? It's a prerooted stock UK ROM. Plain and simple.
Click to expand...
Click to collapse
Yup. It is exactly that. It has no unique features other than the fact that it is the stock UK ROM that went missing at the same time as all of the file sharing websites in the form of a fruitcake.
Has anyone tried it to see if it works? I still have to phone (locked bootloader & It's not mine) I made it from (though not for much longer) and can have another go!
Thanks, I'll try it when I get back home.
Motorola Atrix (AOKP JB)
Nexus 7 (Stock+ Root)
Desire HD ~ overheating rebooting.
N900 ~ usb broken off.
Personally it could be for reselling purposes, no point in selling a phone with a custom rom.
Sent from my Nexus 7
Motorola Atrix (AOKP JB)
Nexus 7 (Stock + root)
blttalas said:
i think nobody needs this rom
Click to expand...
Click to collapse
I think nobody needs comments like this.
jersonf said:
Personally it could be for reselling purposes, no point in selling a phone with a custom rom.
Sent from my Nexus 7
Motorola Atrix (AOKP JB)
Nexus 7 (Stock + root)
Click to expand...
Click to collapse
That's exactly the reason I need this rom. Very much appreciated OP
Sent from my MB860 using xda app-developers app
debt collector said:
That's exactly the reason I need this rom. Very much appreciated OP
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
X2 - OP thanked.
Sent from my MB860 using xda app-developers app
Tried this yesterday. Had CM7 latest nightly running. Did a full wipe and clean install. But unfortunately, it kept booting into CM7 (not the one I had before flashing). I anyways tried logging into my Google account and the setup wizard force closed every time I tried. Had to revert to my previous setup
Not sure if I did anything wrong, I know the usual drill of installing custom ROMs.
Did anyone else give a try?
gkarthik16 said:
Tried this yesterday. Had CM7 latest nightly running. Did a full wipe and clean install. But unfortunately, it kept booting into CM7 (not the one I had before flashing). I anyways tried logging into my Google account and the setup wizard force closed every time I tried. Had to revert to my previous setup
Not sure if I did anything wrong, I know the usual drill of installing custom ROMs.
Did anyone else give a try?
Click to expand...
Click to collapse
Very odd issue... Is it because the device I made it from has a locked bootloader? You say that the rom didn't flash (or did but not properly) what did the install script in CWM say?
Sorry I don't have the device any longer so I won't be able to do anything with re making the fruitcake :crying: as I have had to give it back.
PS I have sent you a PM with the original rom link in it, may be that the one on the mirror is corrupted.
Hey bro
I know that Rom Factory is working on Unlocked Bootloader
Sent from my MB860 using xda premium
hydo1 said:
Very odd issue... Is it because the device I made it from has a locked bootloader? You say that the rom didn't flash (or did but not properly) what did the install script in CWM say?
Sorry I don't have the device any longer so I won't be able to do anything with re making the fruitcake :crying: as I have had to give it back.
PS I have sent you a PM with the original rom link in it, may be that the one on the mirror is corrupted.
Click to expand...
Click to collapse
The script said that the flash was successful. Also it said that I should not forget to wipe cache and data, which I did anyways. No errors in the install script.
Not sure if the zip had the original ROM, coz it was booting into CM7, which is obviously not what you are trying to do. I did a full wipe, 3 times, so I guess there is no possibility for it to boot into my previous installation of CM7 nightly.
I saw your PM. Thanks. I will try today if I get some time off work and let you know.
gkarthik16 said:
The script said that the flash was successful. Also it said that I should not forget to wipe cache and data, which I did anyways. No errors in the install script.
Not sure if the zip had the original ROM, coz it was booting into CM7, which is obviously not what you are trying to do. I did a full wipe, 3 times, so I guess there is no possibility for it to boot into my previous installation of CM7 nightly.
I saw your PM. Thanks. I will try today if I get some time off work and let you know.
Click to expand...
Click to collapse
The zip is 200MB this would make you think that it includes the stuff. I have just extracted it an the .zip only contains the edify script for installing the rom nothing else. Derp.
gkarthik16 said:
The script said that the flash was successful. Also it said that I should not forget to wipe cache and data, which I did anyways. No errors in the install script.
Not sure if the zip had the original ROM, coz it was booting into CM7, which is obviously not what you are trying to do. I did a full wipe, 3 times, so I guess there is no possibility for it to boot into my previous installation of CM7 nightly.
I saw your PM. Thanks. I will try today if I get some time off work and let you know.
Click to expand...
Click to collapse
I mirrored the zip on 4shared right after I downloaded it. It may have been corrupted or something, but I definitely didn't put CM7 into it
Sent from that Atrix.
tatperson said:
I mirrored the zip on 4shared right after I downloaded it. It may have been corrupted or something, but I definitely didn't put CM7 into it
Sent from that Atrix.
Click to expand...
Click to collapse
The zip I uploaded was corrupted sorry guys. The problem with not being able to test these things.
Sent from my ZTE Blade using xda app-developers app
Ah, no wonder it installed in 2 or 3 seconds!
MROM 2.3.7 to Stock 2.3.4
Can someone make working UK (Orange) or Europe (Retail) Fruit cake? I need it for my Atrix, which is unlocked for all carriers, rooted and with unlocked bootloader. Didn't find nowhere.
Does this ROM has Cell Broadcast?