Hi everyone
Just got the xperia z yesterday (after my previous lg 4x was stolen... grrr... may the thief get permanent bursting hemorroids...) and I noticed a weird thing.
The mute/vibrate/sound toggle in the notification bar does not seem to work, and the same goes for the one in the popup shown by pressing the power button for a couple seconds.
Details: the mute or vibrate icon appears on the notification bar, but if I check the volumes in settings, they're still all on, and if I receive a call or get a notification or whatever, the phone actually rings despite the supposedly muted state.
All this doesn't happen if I "manually" turn the volume off with the volume buttons or via settings: in that case the vibrate icon appears and the phone actually does not ring.
Has anyone experienced anything similar?
Nope but you may want to try a factory reset.
And this is not the troubleshooting section.
Sent from my gorgeous White Xperia Z
Rashkae said:
And this is not the troubleshooting section.
Click to expand...
Click to collapse
Ooops, sorry my bad, I posted while I was still half asleep
Yes. this is happening on mine too. Really annoying. If you get it sorted then please let me know!
Related
Tried Forum/Google search for this and too many results.
Situation: My noob friend buys a refurbished AT&T Tilt after my praises and he reports that the screen randomly wakes up when the unit is off without any action on his part. What could be the common causes? My Tilt doesn't do this even after Hard-SPL, SIM unlock, and third party apps. He has none of this so far, just the stock ROM. Should I tell him to get a replacement? Do refurbished models have this problem?
the screen should turn on after you press the power button. press it again and the screen turns off. hold it and it wil shut down/power off. i thought that was normal -_-
isnt that the whole point?? u press the power button to wake it up??
I am LMAO at the responses so far. He is pressing the power button to turn it off. After it turns off, it will wake up randomly without any action on his part. I will edit the thread title to be more clear.
Camp said:
I am LMAO at the responses so far. He is pressing the power button to turn it off. After it turns off, it will wake up randomly without any action on his part. I will edit the thread title to be more clear.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=378091
Something like this.
JimmyMcGee said:
http://forum.xda-developers.com/showthread.php?t=378091
Something like this.
Click to expand...
Click to collapse
Thanks. I don't know if that is what is happening to him, but I will direct him to that thread.
The screen "wakes up" when ever an alarm goes off or you receive a message. Can you confirm that nothing is happening? i.e.:
1. it did not auto-connect to check for messages.
2. your friend did not receive a text message
3. no alarms went off
???
Bill
whk said:
The screen "wakes up" when ever an alarm goes off or you receive a message. Can you confirm that nothing is happening? i.e.:
1. it did not auto-connect to check for messages.
2. your friend did not receive a text message
3. no alarms went off
???
Bill
Click to expand...
Click to collapse
I will ask him and post the answers here.
I have the same problem on my stock tilt any solutions anyone? I have done numerous hard resets and that seems to the solve the problem for a couple months then it returns.
could be battery check from sprite backup
Sprite backup has an auto backup when it detects low battery. To test for low battery it periodically turns the device on - if you have sprite backup installed this could explain it.
somthin that was happening to mine for a bit was when i logged on to AIM for a while, it started doing that.... then ever since, even if app is completely closed out, it kept doing it!! it would randomly light up for no freakin reason (no auto login, no apps running) jus light up, then go dim???.... tried everything, eventually got new ROM and hasnt done it since. see if he has used the IM app, that was the problem for me...
there could be so many reasons why it would wake. Just the simple slide of the screen will wake it up. Theres a registry tweak to turn it off. There's also power options your friend can play around with.
(Sorry - this was previously in the wrong thread category)
Hi,
after installing some software apps (numerous freeware utilities), my diamond does not ring anymore when I am called (it does vibrate).
I have checked everything but cant switch the darn ringing on again - other sonds work fine, it just doesn't ring. This is the second time this has happend - after the first time the hard-reset fixed the problem, but then I reinstalled several programs again and the same problem is back again.
Does anyone have any ideas what I can do about this without doing a hard reset?
Perhaps there is a Tweak utility where I can see if the ringing has been switched off?
Please help.
Thanks in advance - I would really appreciate any suggestions.
Berx1 said:
(Sorry - this was previously in the wrong thread category)
Hi,
after installing some software apps (numerous freeware utilities), my diamond does not ring anymore when I am called (it does vibrate).
I have checked everything but cant switch the darn ringing on again - other sonds work fine, it just doesn't ring. This is the second time this has happend - after the first time the hard-reset fixed the problem, but then I reinstalled several programs again and the same problem is back again.
Does anyone have any ideas what I can do about this without doing a hard reset?
Perhaps there is a Tweak utility where I can see if the ringing has been switched off?
Please help.
Thanks in advance - I would really appreciate any suggestions.
Click to expand...
Click to collapse
didi you installed pointUI and the SystemInternalsV2????
you might not like the answer, but hard reset has fixed that problem for me with the diamond and 2 other htc phones i had in the past.
adempozhari said:
did you install pointUI and the SystemInternalsV2????
Click to expand...
Click to collapse
What is pointUI ? - I have the standard diamond branded user interface from O2 with all the system internals and the ROM version 1.93.207.2 German.
Please help me - I really do not want to do a hard reset because the last time I could not retrieve my back up with the Sprite backup utility .
Thanks in advance for any help.
i can't believe i'm now posting in this. i remember telling you to post this on the main diamond forum and now i'm having the same problem.
i've tried putting the ringtones in the internal storage, and on the phone's main memory, sometimes i hear the ring for a split second before it goes silent.
from searching, it seemed like some people have had this issue with some SRS WOW program but I don't have that.
have you been able to resolve this? I too would like to avoid a hard reset if at all possible, i just got the phone setup the way i want it and it would take a ton of time to get it back....
This may sound stupid, but give it a try, it has helped before...
Go to the settings tab in TF3D.
Tap Sound
Set Volume at 100%
Sometimes, the ring volume gets reset to 0 by itself, and it took me 4 weeks before I found it, after trying about everything, from uninstalling every app to hacking the registry.
Twabi2 said:
This may sound stupid, but give it a try, it has helped before...
Go to the settings tab in TF3D.
Tap Sound
Set Volume at 100%
Sometimes, the ring volume gets reset to 0 by itself, and it took me 4 weeks before I found it, after trying about everything, from uninstalling every app to hacking the registry.
Click to expand...
Click to collapse
that's usually one of the first places i check... i'll keep it in mind though.
i think i might have an idea what my issue might be, so it was working this morning but i noticed microsoft's voice command was announcing the name of the caller as it was ringing. so i think it might be an issue with the msvc. i'm going to try disabling the voice announce and see what that does...
Problem Solved!
Hi,
guess what - I finally found the solution
I never bothered to read the Diamond manual as I believed the user friendly interface to be self-explanitory - however, I overlooked something very important!
When setting the volume up or down by means of the buttons on the left hand side of the Diamond, the usual vertical bargraph type of display appears and reacts according to how the adjutment is made with the volume up or down buttons, this is clear. There is also the possibility to mute the phone or to put it into vibration-only mode.
Now, at the top left hand side, there is an arrow (looks like this: <). If you quickly tap on that with the stylus before the screen goes away again, you will get a new screen for another setting - now this setting is for adjusting the ringing volume / mute / vibration settings (now the arrow is on the top right and looks like this: >
It is so simply expained: The system volume is not the same as the telephone ringing volume and just requires the quick click on the top left hand side of the screen and voila, bob is your uncle! You can then set the ringing volume up and your phone will ring again.
I wantend to know why the heck the ringing volume just changes or what caused the problem and I have also been able to determine why the ringing volume settings change - to explain:
When setting the SYSTEM VOLUME to mute - then the PHONE RINGING VOLUME is also muted! However, when then setting the system volume up again, the ringing volume still remains muted! This is important to know and it can also happen accidentally or it may be forgotten to reset the ringing volume. I dare to say that this was not really thought about very well and I hope the developers will change this or show a VOLUME STATUS for both the SYSTEM and RINGING volumes somewhere on the desktop/today screen.
... or would that not be a good project for a developer here on this forum perhaps? I would appreciate a comment here...
Thanks anyway for the kind responses and willingness for your help.
I have to date still not read the actual over 260 page little manual booklet, but it probably is described in there. Moral of the story: RYFM (for those who know what that stands for)
Amendment: Found it described on page 42 in the manual booklet - it's actually described there but can be easily overlooked and it is not described that the system volume settings affect the ringing volume settings.
Ok, so the phone rings now but I have a similar problem with my GPS receiver
I will open another thread for this - hopefully someone can help me.
Best regards,
Mike - Germany.
I had the same problem.
It happened to me.
All the system sounds were fine, but the ring wasn't there.
Checked settings, change ringtone, tried a lot of stuff.
I was begginning to think about a hard reset when I found my problem origin:
At least in the ROM that I use (Shaks), when you press one of the volume keys in the side of the phone, you change system and ring volume.
If I press it all down, it goes to zero then vibrate then silent, and normally the system and ringer volumes are equal when you do this.
In that system volume screen that appears when you press volume key, there is a arrow in the top left. If you press it, you'll go "ringer volume" screen. I noticed that system volume was in maximum but the ringer volume didn't fallow it.
That said, if your ROM uses the volume keys in that same way, press that arrow and check if the ringer volume is on too.
I have a situation occasionally where right at the time I have a call coming in, circumstances of using the phone put me at the home screen while the phone is ringing.
When that happens I cannot answer the phone. If I press and hold the home, it does not have anything on the taskmanager to go to to answer. If I press the green phone icon, it takes me to the dialer, which is presented ready for me to dial and a green call button. Still ringing...
Any ideas on how to answer the phone in a situation like this?
I believe you can drag the top bar down and answer it.
had this happen one time. weird. at the exact moment i sent a text to the same person that was calling me. it was ringing in my hand but no where to answer. hit the phone icon and it was just the dialer.
mtrsttr said:
I believe you can drag the top bar down and answer it.
Click to expand...
Click to collapse
Yes I think so too. I had this happened once and at the top bar is a green phone icon. Drag the bar down click on phone and it take you to the phone screen to answer.
Wow. Thanks. It is weird.
I'll try pulling down the notification bar next time it happens.
So I've searched all over to try and figure this one out, but there's a lot of similar issues and none that I could find that are the same thing. The description might end up long because I want to be absolutely clear about what's happening (since there were a lot of really similar issues I found when I searched).
I have a Motorola Droid running CM 7 (.0.3, i think), but the problem was also there on the last version of CM I was running (6.something, probably). The first time I wiped and installed CM7 the problem seemed to be solved, but I screwed up the account setup and on the 2nd install the problem was back.
ANYWAY, the actual problem is this:
My phone's sound will NOT turn off. I can turn it all the way down with the volume rocker, and it will show the Vibrate icon, but the volume bar will not go down that last little bit. It does not vibrate. It does not go to silent. If I turn off sound from the lock screen, it doesn't do anything except show a vibrate icon at the top. The volume level remains the same. Same goes for the sound toggle on the home screen menu. It just doesn't do anything except change the icon to vibrate, silent, whatever.
The only way I can get it to go to silent/vibrate is through the Sound menu in settings. Even then, I can't just check the Silent Mode box, I have to go to the volume dialog box and manually drag it all the way to zero. Then, if I hit volume up on the rocker or turn the sound up in any other way, I have to go back to Settings to change it again.
I'm going crazy trying to solve this. I've wiped my phone. It doesn't seem like a hardware issue since everything is working except the switch to vibrate/silent from sound-on mode. I've tried everything I can think of. I've had the phone for almost 2 years now, and I'm generally good at fixing this type of thing, or at least finding the answer on Google. Has anyone had this issue?
khorbin said:
So I've searched all over to try and figure this one out, but there's a lot of similar issues and none that I could find that are the same thing. The description might end up long because I want to be absolutely clear about what's happening (since there were a lot of really similar issues I found when I searched).
I have a Motorola Droid running CM 7 (.0.3, i think), but the problem was also there on the last version of CM I was running (6.something, probably). The first time I wiped and installed CM7 the problem seemed to be solved, but I screwed up the account setup and on the 2nd install the problem was back.
ANYWAY, the actual problem is this:
My phone's sound will NOT turn off. I can turn it all the way down with the volume rocker, and it will show the Vibrate icon, but the volume bar will not go down that last little bit. It does not vibrate. It does not go to silent. If I turn off sound from the lock screen, it doesn't do anything except show a vibrate icon at the top. The volume level remains the same. Same goes for the sound toggle on the home screen menu. It just doesn't do anything except change the icon to vibrate, silent, whatever.
The only way I can get it to go to silent/vibrate is through the Sound menu in settings. Even then, I can't just check the Silent Mode box, I have to go to the volume dialog box and manually drag it all the way to zero. Then, if I hit volume up on the rocker or turn the sound up in any other way, I have to go back to Settings to change it again.
I'm going crazy trying to solve this. I've wiped my phone. It doesn't seem like a hardware issue since everything is working except the switch to vibrate/silent from sound-on mode. I've tried everything I can think of. I've had the phone for almost 2 years now, and I'm generally good at fixing this type of thing, or at least finding the answer on Google. Has anyone had this issue?
Click to expand...
Click to collapse
A good way to try and debug the issue would be to install Widgetsoid 2.x(https://market.android.com/details?id=com.jim2&feature=search_result) and place a switcher on your homescreen with the different sound options such as silent and vibrate. Then, toggle those switches and see if your status bar icon changes, and if the phone is actually in vibrate or silent mode.
If that doesn't work then I would suggest to try another ROM, or perhaps it's a hardware issue.
Thanks, I'll try that and let you know the results.
Go to Settings -> CyanogenMod Settings -> Sound -> Silent State (check)
hi
Does anyone know what this icon is? (In picture)
I thought it was that my phone was set to vibrate but its not! What have i done?
Btw this is my first android phone after 4 years of iphone so still learning
Big time
I have the same thing. It thought that it is for vibration as well (either with key pressing or for a call).
scrott901 said:
hi
Does anyone know what this icon is? (In picture)
I thought it was that my phone was set to vibrate but its not! What have i done?
Btw this is my first android phone after 4 years of iphone so still learning
Big time
Click to expand...
Click to collapse
Eborg said:
I have the same thing. It thought that it is for vibration as well (either with key pressing or for a call).
Click to expand...
Click to collapse
It comes when you set the phone on ring and vibrate both.
Set the phone only to ringing mode and it will vanish. Once you activate to vibrate along with ring it will emerge in the status bar.
Used to remove it in the GB using JKay mods - Deluxe Settings
I think it shows up whenever you have your phone set to vibrate..either with ringer or on silent mode.
thanks for the replies guys, think ill just have to live with being told its on vibrate