Hi
Myself unlocked boot loader flashed RA recovery and all went fine and it is not booting after the X screen
I have seen lot of people asking the same questions and N number of threads.
I have tried all these reading the other threads.
1. Tried passimg method almost 50 times and was successful and not booting after X
2.Tried flashing recovery again and flashing was fine but stuck at X screen
3.All was tried through fastboot comments (Screen shot atchd)
4.Tried flashing radio 5.12.00.08 and failed(Image update error)
5.read all the posts since yesterday and the others are also left in between !
Screen shot attached:
Kindly help !!
What radio do you have now and where did you download the 5.12.00.08 radio? From the wiki? It's not really necessary to update from 5.08.00.04 to 5.12.00.08.
Mr.Tommert
I was using the original rom came with the phone and wanted to install the JB.Hence tried to install recovery .
I was stuk at X screen and tried passimg many times and some times it boot and again when charger is plugged in ,it restarts.
Now it is not even booting .tried to install passimg and it is happening,but not booting up.
But now i am stuck up at X screen.
Downloaded the radio from wiki!
Help pls!!
can you access fastboot usb mode n recovery?
Sent from my Nexus One using Tapatalk
hi! i am able to access fastboot ! when clicked on to recovery ,it will again restart !! today luckily ,i was able to get inside also after passimg method and then after sometime again it got restarted and X appeared...!! now again stuck with X.atleast got confidence that it is not bricked!!
Any help please will be highly appreciated.
amjithg said:
hi! i am able to access fastboot ! when clicked on to recovery ,it will again restart !! today luckily ,i was able to get inside also after passimg method and then after sometime again it got restarted and X appeared...!! now again stuck with X.atleast got confidence that it is not bricked!!
Any help please will be highly appreciated.
Click to expand...
Click to collapse
it seems lyk the strange problem that my cousin's n1 had. wat i did was. (read fully n download and transfer the required files to sd)
1.press n hold volume down + power button
2.enter fastboot usb mode.
3.connect phone to system.
4.it will install the drivers
5.in cmd prompt navigate to folder where fastboot.exe resides and type FASTBOOT DEVICES to make sure your device is identified.
6.nw flash recovery.img (u should have that in the fastboot folder)
7.nw enter into recovery
8.nw to make the recovery stick, download this zip http://db.tt/ooDaCnU and flash it
9. nw download this stock 2.3.4 rom http://android.clients.google.com/p...b119f8.signed-passion-ota-102588.656099b1.zip and install zip from sd card.
10.reboot n njoy
Sent from my Nexus One using Tapatalk
hi
Thank you for the reply !
I tried flashing recovery RA (for almost 50 times) .the flashing is going on well.
fast boot devices is showing the device as well.
But after flashing the recovery ,it is not entering the recovery.when clicked on power button,with recovery highlighted(in bootloader) it restarts..!!
will flashing of any other recovery or boot image will help ?
kindly reply !
hmmm. yea. may be u can try different recovery.img.
also erase everything via fastboot first
Sent from my Nexus One using Tapatalk
Hi!
1.Tried flashing another recovery
2.Flashed FRG33 ,through fast boot method after wiping !
3.Tried recovery and still not entering inside.
Help plss!!
help plssss!!!!
amjithg said:
help plssss!!!!
Click to expand...
Click to collapse
ensure whatever recovery you are flashing is correctly flashed and then ensure the correct supported ROM.
Also note you should download the rooted version of FRG33 or any custom recovery if your device is rooted.
Hi Guys,
**Alert : Noob Here **
So, I decided to install some custom ROM on my Samsung Galaxy ACE S5830 and went through loads of information on how to do so. So this is what i did - ( from the start) :
a. Rooted the phone ( from a file called upd_1.zip ( 925KB) by going into recovery mode)..
It worked fine and my phone got a 'superuser' on the application drawer.
b. Installed 'recovery-clockwork-5.0.2.6-galaxyace-fix' using the recover mode. ( had to rename the file to update.zip coz the recovery mode was not reading the file ).. Worked properly as i got another application 'CWM' on my application drawer.
c. Now, just to check if my CWM was doing good in recovery mode, I switched off my cell, pressed 'vol-up + home + power-up' button to go into recovery mode.. I got some text on the top left corner of the screen with a SAMSUNG logo on the screen...and then it got stuck there...i waited for some time but nothing happened.
I removed the battery and tried switching on the phone normally ( just power-up the phone ) (just to ensure that it still works) and now, the phone is stuck with the SAMSUNG logo on the screen and doesn't work at all !!!
I am confused as after installing CWM, i did switch on the phone normally and it seemed to work fine..but now after I pressed 'vol-up + home + power-up' buttons, its stuck at the black screen with LOGO on it...
Any clue what's wrong with my phone??
Did you flash the correct software for your model of device?
Sent from my GT-I9300 using xda app-developers app
I think you just bricked your phone, you have to flash a stock Rom.
Recovery Mode: Power + Home + Vol Up.
Sent from my GT-S5830i using xda app-developers app
stevoswifty said:
Did you flash the correct software for your model of device?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I am pretty sure that I took the right software for my model. I even made sure that its S5830 and not S5830i
stevoswifty said:
Did you flash the correct software for your model of device?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Hyoz said:
I think you just bricked your phone, you have to flash a stock Rom.
Recovery Mode: Power + Home + Vol Up.
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
How to do that?? Is there and tutorial for that?
Will the below post be relevant :
http://forum.xda-developers.com/showthread.php?t=2054182
Just an update.. The text which comes on the top left corner of the screen after trying to enter the recovery mode is :
##########################
# #
# RAMDUMP Mode #
# (ARM9 mode) #
##########################
krishnasty said:
Just an update.. The text which comes on the top left corner of the screen after trying to enter the recovery mode is :
##########################
# #
# RAMDUMP Mode #
# (ARM9 mode) #
##########################
Click to expand...
Click to collapse
Bro try going to download mode by pressing vol down+power+home press it for 7-8 seconds then flash multi pakage firmware from sammobile.com
and the link is for ace s5830i not ace s5830 check the link for your stock firmware
http://forum.xda-developers.com/showthread.php?p=20683854
You have used the wrong combo & have got yourself in the ram dump mode. The combination for recovery is, power + home button simultaneously & when something appears on phone, leave the power button while still holding the home key. Btw, no need to announce a high alert that you're a noob or such unless you're a badass
@ Ppl : Read what he's done carefully & reply if you know. Don't confuse the newbies.
Sent from my GT-S5830 using xda premium
Venomous Viper 119 said:
You have used the wrong combo & have got yourself in the ram dump mode. The combination for recovery is, power + home button simultaneously & when something appears on phone, leave the power button while still holding the home key. Btw, no need to announce a high alert that you're a noob or such unless you're a badass
@ Ppl : Read what he's done carefully & reply if you know. Don't confuse the newbies.
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
Haha - the alert was just for the experienced guys to not use 'experts terminology' while explaining me what to do
Well, I tried following your method. I help d home button and the power button and let go for the power button when 'SAMSUNG' appeared while still holding the home button...but nothing happened.. The screen is stuck at that particular screen itself with no progress..
Should I flash my phone with stock firmware as advised by the guys above?
GUYS !!!
I restored the phone with stock ROM and a tutorial from another member about flashing stock ROM from ODIN got my cell working !!!
Yayyy !!!
( I was **** scared when read the line that if the flashing fails in first 15 secs ( boot loader flashing) my phone is bricked ):fingers-crossed:
Thanks a lot guys - all of you ...for the help...:victory:
**BUT**
I still want to instal custom ROM to my device...and since I ve committed a mistake in he past doing so, will any1 would be kind enough to show me the path ( link ) to enlightenment ( installing custom ROM from the start ) ?
So,
I thought its better to search for things ranther than troubling you guys to spoon feed me everything...
For rooting, I am gonna try doing everything from the start and be a little more attentive.
1. So, from hubix's guide, I downloaded the below mentioned bold file:
"SuperOneClick 2.3.3 (for 2.2> firmwares) or Universal Gingerbread Root/Unroot (for 2.3< firmwares)"
2. To install CWM , i downloaded the following file :
"ClockworkMod Recovery 5.0.2.6 (Fixed!)""
3. Since my phone Android version is 2.3.6, I would go with 'Db' method of rooting :
"Db. Rooting for 2.3.x (NEW METHOD!):
Download file called universal_gb_root_v25.zip and copy it to your sdcard
Turn off your phone
Press POWER+HOME BUTTON
Select update from sdcard, select the file universal_gb_root_v25.zip
After the update completed - reboot
Now you have rooted S5830"
4. Then, follow up the the Flash Custom Recovery steps from the same page, which is as follows :
Put recovery-clockwork-5.0.2.6-galaxyace.zip into SD Card
Turn off your phone
Press POWER+HOME BUTTON
Select Update Zip From SD-Card option. [If you are on previous version of CWM recovery then you might need to select Install Zip From SD Card and then Choose Zip From SD Card Option simultaneously. ]
Select recovery-clockwork-5.0.2.6-galaxyace.zip and flash it
Reboot your device
Please let me know if I am correct or will following these steps would screw up my phone again ???
You're correct.
Sent from my GT-S5830i using xda app-developers app
Hyoz said:
You're correct.
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
Cool..now coming to installing the custom ROM, can I install any custom ROM ? Because in few of the ROM's, there is something mentioned as
"This Rom is based on CyanogenMod 10.1 for Galaxy Ace"
What is this supposed to mean ?? Are there any other parameters which decide on the factors on what ROMs can be costumed installed??
( for example in some ROM i also saw something to do with ext partition )
krishnasty said:
GUYS !!!
I restored the phone with stock ROM and a tutorial from another member about flashing stock ROM from ODIN got my cell working !!!
Yayyy !!!
( I was **** scared when read the line that if the flashing fails in first 15 secs ( boot loader flashing) my phone is bricked ):fingers-crossed:
Thanks a lot guys - all of you ...for the help...:victory:
**BUT**
I still want to instal custom ROM to my device...and since I ve committed a mistake in he past doing so, will any1 would be kind enough to show me the path ( link ) to enlightenment ( installing custom ROM from the start ) ?
Click to expand...
Click to collapse
Go to my blog from My Signature. Then:
1. Search thread HOW TO ROOT GALAXY ACE. Follow the steps.
2. Search thread HOW TO INSTALL CWM. Follow the steps.
3. Some good and stable ROMs are posted on my blog, you may check out the features and screenshots and install whichever suits you.
Link to my Blog. www.andro-sapien.blogspot.in
Am just giving this tip coz i believe you may again mess up ur device if you follow any wrong or outdated thread here.
Sent from my GT-S5830 using xda app-developers app
krishnasty said:
GUYS !!!
I restored the phone with stock ROM and a tutorial from another member about flashing stock ROM from ODIN got my cell working !!!
Yayyy !!!
( I was **** scared when read the line that if the flashing fails in first 15 secs ( boot loader flashing) my phone is bricked ):fingers-crossed:
Thanks a lot guys - all of you ...for the help...:victory:
**BUT**
I still want to instal custom ROM to my device...and since I ve committed a mistake in he past doing so, will any1 would be kind enough to show me the path ( link ) to enlightenment ( installing custom ROM from the start ) ?
Click to expand...
Click to collapse
hi there, i got the exact probem with yours and started to get frustated
can you tell me the way you solved it in detail?
thanks
poissonnoir said:
hi there, i got the exact probem with yours and started to get frustated
can you tell me the way you solved it in detail?
thanks
Click to expand...
Click to collapse
Here you can find all your answers and files, I posted that before "how to root, install CWM 5.0.2.6. Fixed and flash a STOCK rom via Odin"
http://forum.xda-developers.com/showthread.php?t=2313363
usb connectivity problem
krishnasty said:
GUYS !!!
I restored the phone with stock ROM and a tutorial from another member about flashing stock ROM from ODIN got my cell working !!!
Yayyy !!!
( I was **** scared when read the line that if the flashing fails in first 15 secs ( boot loader flashing) my phone is bricked ):fingers-crossed:
Thanks a lot guys - all of you ...for the help...:victory:
**BUT**
I still want to instal custom ROM to my device...and since I ve committed a mistake in he past doing so, will any1 would be kind enough to show me the path ( link ) to enlightenment ( installing custom ROM from the start ) ?
Click to expand...
Click to collapse
hello,
i have the same problem as u do......
but i cant flash my phone using odin....coz everytime i connect it with my computer it says usb device is not recognised....
and the com port mapping in odin is also not loading.....
i am using windows 8.1......but the problem is not solved in 8,xp or 7.....
what should i do????
ritz94 said:
hello,
i have the same problem as u do......
but i cant flash my phone using odin....coz everytime i connect it with my computer it says usb device is not recognised....
and the com port mapping in odin is also not loading.....
i am using windows 8.1......but the problem is not solved in 8,xp or 7.....
what should i do????
Click to expand...
Click to collapse
Is your phone actually working (except usb connection) ?
LS.xD said:
Is your phone actually working (except usb connection) ?
Click to expand...
Click to collapse
No...its not....
its only going into the download mode.....and nowhere else....
no recovery or boot mode....
please help me.....
ritz94 said:
No...its not....
its only going into the download mode.....and nowhere else....
no recovery or boot mode....
please help me.....
Click to expand...
Click to collapse
I probably can't. But you can try as followed:
- Install Samsung drivers + start ODIN (You probably already have)
- Pull out battery
- Put in USB cable (I'm sure you have tried another cable yet)
- Press key combo for download mode (Vol down + power + home)
- Put the battery back in while still holding down the keys.
Hi if anyone can help me with this , i am trying to install Viper One into my device , but my device stuck in boot loop , its a soft brick, i can enter fastboot usb mode. i cant enter recovery mode to D:
so can anyone tell how to install Rom using fast boot please thank you
please tell if you know please
Hello,
I download the "android revolution" rom and install him on the cwm recovery.
The phone is load up for more then 10 min. itry to go back to the recovrey and the recovrey dont load (its back to the htc logo).
So i flash the twrp rcovrey and it work- but the touch is dont working.
I stuck on the twrp recovrey for more then hour and the touch stell dont work.
I try to use the powerbutton and the down vol, but it dont work (the home button and the back button is flash but nothing happen).
Pls help me.
I just need my phone work and i dont try to flash more rom any more.
Pls i begging you to help me.
well
what happened is that i flash a sprint recovry on an unloced phone
so i try to flash another recovry and i geting a error (try 5 custom recovry)
pls help me
Hi everyone,
i try to downgrade 5.1 to 4.4.4 via recovery mod. then its show error and cant boot it. so i try to flash stoke rom using odin.. but its cant do it and show " write error" on odin log area., now my P1000 seems completely bricked.
I cannot access to download mode or recovery now, when i plug to charge or turn it on display only show triangel between mobile and pc.
so kindly help me to fix this.. and sorry about my bad english..
thanks
Hi Shammis, did you check md5? I had that with bad downloads. I tried 4 hours until I could succeed with proper file and no errors. Hope that helps. I tried download with other browser NOT CHROME!!! then it worked.
no i early flash with this stoke rom.. its worked fine.. and finally i unbrick tab using OneClick Unbrick. now i can enter to download mod and recovery mod. when i enter to recovery mod its show "waiting to mount SD Card " but after finish 20 second count show no sd card and exit from recovery mod.. and when i try to flash with odin its show write error.. anyone know what i do now.?