Stuck at startup please help - Motorola Atrix HD

Hi I was trying to install cwm recovery on my motorola atrix hd using myth tools phone was connected normally so I choosed the flash recovery option and after few secs it restarted my phone and now it's stuck on start screen saying :
AP Fastboot Flash Mode S
10.98* sha etc 2012-11-17 23:33:08
emmc info: size8gb
device is locked status code:0
battery ok
connect usb data cable / and when I plug in usb cable it says usb connected
fastboot reason: flash failure
every time I turn it on it goes straight to this screen and if I try pressing volume up + power then it goes to a screen with dead android icon :laugh:
what did I do wrong ? and how to get it back to normal please help me ... I tried running myth tools again and choose normal boot / unlock bootloader but they get stuck at demon started successfuly :silly:

okay solved it pressed 3 buttons once at all and it booted normally, but it still says flash failure when I try flash cwm recovery and it reboots to Fastboot screen... Please help.
solved it.. thread can be closed down now...

Related

My phone won't start

Hello,
i think I've broken my phone, I hope you can help me.
I followed this tutorial that you can download here : (I can't post the link because I'm a new user)
I've tried to unlock the boot loader with success, then the installer tried to install a recovery (as the text in the command window said) and the progress stopped, I have waited a couple of minutes but nothing happend and I disconected the phone from my computer (I know that was a bad idea).
Know my phone won't start, not even in the recovery mode. I can hold the Vol +, Vol - button and the power button but only the huawei logo appears, then turns the screen black and nothing more happens. I have also disconnected the battery for some minutes but this didn't change anything.
The only positiv thing is, that Fastboot still recognizes the phone when it's connected to my PC, but I still can't enter the fastboot mode.
I hope you can help me and save my phone,
thankfull Robin
Flash twrp in it, and than install persona's B602 rom.
D1stRU3T0R said:
Flash twrp in it, and than install persona's B602 rom.
Click to expand...
Click to collapse
First of all thank you for your reply. But I can't put my phone with my computer and minimal ADB in fastboot mode. The device is found with the command "adb devices" but it has only recovery status. When I type in "adb reboot bootloader" then Huawei logo flashes up and then it goes back to blackscreen.
I fixed it
I fixed the phone by myself. I'm not an expert at all and this is for the people with the same problem.
I think the problem was, that the phone won't leave the recovery mode, because it was listed with "apd devices" as "recovery" for the whole time.
So I tried to install a stock ROM via SD Card with a tool named au_temp.cfg and the phone actually did more then just turning back off when i pressed the Vol+, Vol- and Power key. So the phone actually entered the bootloader but I got the wrong stock image, but this didn't mattered because after one try the phone got back to normal mode and booted quite fine. So I think the main problem was, that my phone was stuck in a recovery mode and needed help to exit it.

P9 Bricked

Hello,
My phone will not turn off and just keep rebooting to the warning "Your device is booting now...".
Fastboot (Off + Vol- + USB) doesn't work, eRecovery too.
Any ideas how I can fix this?
Edit: After completely discharging my phone, fastboot and recovery works again. I was able to flash C432B136.

Help needed: Attention: Please update system again (Func No: 11 / Error : No 2)

Hi guys,
I bought the phone from ebay as they said it was stuck in fastboot mode after an OTA update, and having unlocked and played around with custom roms on several other phones I thought "No problem".
However, this is a problem. The phone is not stuck in fastboot mode, and I cannot get the phone to boot into fastboot mode. It is not seen by my computer
On turning on, it shows the Huawei Logo and then shows the message that the phone is unlocked and cannot be trusted and I should visit:
http://zh.ui.vmail.com/emotiondownload.php?mod=restore
If I hold down vol down + power it says 'Your device is booting now' but nothing happens.
Pressing power, or vol up + power, or just the power button, or leaving it then boots to mr green android with the message:
Attention! Please update system again
Error
Func No: 11 (recovery image)
Error No : 2 (load failed)
I have tried:
Booting into fastboot mode via vol down + power
DC Phoenix (as mentioned here: https://forum.xda-developers.com/showthread.php?t=3759988)
This > https://forum.xda-developers.com/p10/help/tutorial-recovering-p10-p10-brick-t3600211
This> https://androidforums.com/threads/unlocked-p9-lite-stuck-at-boot.1225280/
I do not know if the bootloader is unlocked.
Also, it won't turn on at all if it is not plugged in so doesn't seem to be holding charge or battery information. It boots automatically once it's been charging for a couple of minutes,
Help much appreciated!
UPDATE - I can now get into fastboot mode. I sat with my finger on the vol down button until it gained enough power to turn on.
Phone is unlocked
FRP Unlock
UPDATE
I ran the DC Phoenix update and half-way through the phone turned off and now won't turn on again. It doesn't look as if it's even charging anymore. (as per this thread: https://forum.dc-unlocker.com/forum...-plus-not-powering-or-charging-after-flashing)
Marvellous. I'll continue to investigate. If anyone has any ideas, please let me know,
Any news here? Same issue on my device. Unfortunately I can't get into fastboot, I only see:
Attention! Please update system again
Error Mode
Func No: 11 (recovery image)
Error No : 2 (load failed)
It's not even recognised via USB. Maybe the phone still thinks it has to make the low level format after unlocking the bootloader, but can't start any of the recovery.
This is my most expensive brick so far...
On my phone I tried to revert to stock recovery within TWRP and flashed the recovery.img to recovery partition.
After doing this, recovery wasn't working and I unlocked the bootloader. Since that moment I cannot get into fastboot.
Attention! Please update system again
Error
Func No: 11 (recovery image)
Error No : 2 (load failed)
Man I have the same problem. Sorry I'm a beginner and I can't help you. I wanted to ask if you have some tips.
I have that error if I try to enter in TWPR but I can boot in eRecovery and the smartphone turns on and works normally.
I tried to reset by eRecovey but error occurs just the same.
What can I do?

Question Redmi Note 11S bricked with no way out?

Hi i just oficialy unlocked bootloader, flashed twrp recovery boot and restarted phone. After that restart, phone got stuck in loop rebooting to MI logo. Recovery and Fastboot not loading when i press right buttons. Phone just vibrate and keep restarting. I had to dry off battery to turn it off becouse when i connect phone to cable it auto turn on and start restarting. I tryed also unplug battery and flash it by other rom but connection with pc is broken when phone still restarting every 5s. Is there any chance to save this phone from scrap? Thank you
Durien Daragoth said:
Hi i just oficialy unlocked bootloader, flashed twrp recovery boot and restarted phone. After that restart, phone got stuck in loop rebooting to MI logo. Recovery and Fastboot not loading when i press right buttons. Phone just vibrate and keep restarting. I had to dry off battery to turn it off becouse when i connect phone to cable it auto turn on and start restarting. I tryed also unplug battery and flash it by other rom but connection with pc is broken when phone still restarting every 5s. Is there any chance to save this phone from scrap? Thank you
Click to expand...
Click to collapse
You might want to take a look at this.
[GUIDE]How to reboot to EDL from fastboot
Most Qualcomm-based Android PDAs support emergency download (EDL) mode allowing to unbrick device, unlock bootloader or modify protected device parameters. If ADB interface is accessible, "adb reboot edl" can be used to reboot to EDL mode. Many...
forum.xda-developers.com
Obi_Wlan said:
You might want to take a look at this.
[GUIDE]How to reboot to EDL from fastboot
Most Qualcomm-based Android PDAs support emergency download (EDL) mode allowing to unbrick device, unlock bootloader or modify protected device parameters. If ADB interface is accessible, "adb reboot edl" can be used to reboot to EDL mode. Many...
forum.xda-developers.com
Click to expand...
Click to collapse
Thank but phone simply dont booting to fastboot mode.
Durien Daragoth said:
Thank but phone simply dont booting to fastboot mode.
Click to expand...
Click to collapse
You have to experiment with some button combinations. I ran into the same problem with a different phone two years ago. Read everything about this even if fastboot isn't working right now.
[GUIDE][TOOL] Reboot to EDL mode from FASTBOOT! No More "Test Point Method"! [kenzo]
[GUIDE][TOOL] Reboot to EDL mode from FASTBOOT! No More "Test Point Method"! [kenzo] Reboot to EDL mode from FASTBOOT! No more Test Point Method needed ;) Technical Details: Redmi Note 3 support rebooting to EDL in Android Bootloader aboot...
forum.xda-developers.com
Service centre will be your best bet
Durien Daragoth said:
Hi i just oficialy unlocked bootloader, flashed twrp recovery boot and restarted phone. After that restart, phone got stuck in loop rebooting to MI logo. Recovery and Fastboot not loading when i press right buttons. Phone just vibrate and keep restarting. I had to dry off battery to turn it off becouse when i connect phone to cable it auto turn on and start restarting. I tryed also unplug battery and flash it by other rom but connection with pc is broken when phone still restarting every 5s. Is there any chance to save this phone from scrap? Thank you
Click to expand...
Click to collapse
first let's go, download the fastboot stock version of the ROM then download Miflash, unzip the rom on your main disk twice, now on your cell phone you will press the power off button and at the same time the fastboot button (you must have messed up the file boot so it doesn't turn on) and play Miflash also on C disk, open Miflash on mobile in fastboot mode and select ROM folder don't forget to put the option to just clean and not lock, when the process is finished you wait for the phone to turn on
Player__y said:
first let's go, download the fastboot stock version of the ROM then download Miflash, unzip the rom on your main disk twice, now on your cell phone you will press the power off button and at the same time the fastboot button (you must have messed up the file boot so it doesn't turn on) and play Miflash also on C disk, open Miflash on mobile in fastboot mode and select ROM folder don't forget to put the option to just clean and not lock, when the process is finished you wait for the phone to turn on
Click to expand...
Click to collapse
If you have any, let me know on discord, 𝑃𝑙𝑎𝑦𝑒𝑟#2028
Thx but phone dont booting to fastboot mode so i cant flash boot.img i tryed now SP Flash too in linux and still same errors becouse phone disconecting too fast. I think technician service will be solution..
Dont use The daanm Sp flash Tool , Its for mediatek devices, USE Miflash, and Its impossible a phone dont boot in fastboot mode, try again, pls hold The button
I have both Mi flash and SP flash tool
Without fastboot you cant do much...
in Miflash it dont do anything even device it dont see on COM3
in SP flash too it react but with errors becouse of disconecting
phone dont boot right becouse both A and B boot images are corrupted.
Does your screen at boot turn red? I've done everything on my cell phone, several things have happened to me and not once did fastboot have a problem, because fastboot is a totally different place to boot, there is only this possibility if you used commands in adb to remove or do something in fastboot that made it useless, it's impossible to happen this in the way you said
yes i did adb commands in fastboot becouse i instaled recovery and this all happend after reboot
no problem doing things in adb, I said in the sense that you deleted fastboot in adb but that didn't happen by the way you said
Turn off your phone.
Press and hold the Power + Volume Down buttons together and immediately connect the device to the PC. You need to time it perfectly.
It will automatically boot into EDL mode, and LED lights may blink.
Download QPST Flash Tool and install your device's firmware using QFIL(comes included in QPST).
I suggest you to read everything about it online.
Obi_Wlan said:
Turn off your phone.
Press and hold the Power + Volume Down buttons together and immediately connect the device to the PC. You need to time it perfectly.
It will automatically boot into EDL mode, and LED lights may blink.
Download QPST Flash Tool and install your device's firmware using QFIL(comes included in QPST).
I suggest you to read everything about it online.
Click to expand...
Click to collapse
I tryed but not succes. It just booting every 5s nowhere. Cant get to EDL mode sorry. And correct turn off phone isnt possible i have to unplug battery flex cable but i also tryed. Only possible state where it dont restarting is when battery is unpluged and i connect phone on cable with pc and pressing volume down+power. But connection to COM3 is only 2s.
Well, in that case you need to short the test points on your motherboard and plug the phone into your PC at the same time.
Watch several videos related to it on YouTube first.
Wait, is your phone Redmi Note 11 or 11s?
I will try the point test. I have Redmin Note 11s.
Ahhhh...you posted it on Note 11 forum.
Can't help you mate. Things are more complicated in mediatek devices.
Still, this thread might help a little. Good luck.
(Guide) How to fix a hard bricked Redmi Note 9 (Merlin) (Hard Brick)
A how-to guide of restoring a completely bricked Redmi Note 9 Hi, In this guide, I will teach you how to fix a hard-bricked Redmi Note 9 (merlin) and bring it back to its original state. How does a hard-bricked Redmi Note 9 look like? it's stuck...
forum.xda-developers.com
Now i have bit progress with python im able to hold COM3 port connection around 60s. But when i start SP Flash Tool it will always make error. STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001) and STATUS_ERR (0xC0010001) , STATUS_BROM_CMD_FAIL
I finally managed to connect device for longer time cca 1 min with MTKMETAUtilityV49 and it helped me also disable auhorized connection for SP Flash tool V5. By this i formated whole disc except bootloader. Now phone dont self restarting so it is prepared for instal fresh rom. I think this will be again problem becouse i geting this error after few seconds of flashing: STATUS_SEC_IMG_TOO_LARGE

Question Stuck in bootloop, cannot reach fastboot

Hey, I have tried flashing a GSI ROM but got an error after attempting these two commands :
MrScarl3t said:
./fastboot erase system
./fastboot flash system Gsi.img
Click to expand...
Click to collapse
The "system" partition could not be found and after reading some of your comments I figured I had to reboot into fastbootd and not fastboot. Therefore I rebooted my phone but I am now stuck into a bootloop without being able to reach fastboot whatsoever. Holding down the volume down key does not seem to have any effect.
A few more details:
- adb does not detect my device anymore.
- I was previously on a stock ROM.
- I only managed to flash the vbmeta.img before the bootloop happened.
- Upon holding the volume up button, my phone briefly connects to my PC (for about 2 seconds) then disconnects and restarts again.
What could I do to be able to reach fastboot and flash the stock ROM again?
Thanks for reading
Hold power button + volume down button for 30 second if fails then drain the battery then repeat the process.
My battery is drained and no matter how long I hold the two buttons I can't get out the bootloop unfortunately...
-let the cable connected to pc and press (+ and power) when the splatch screen appears wait 3 secondes and release the power button keeping + button only.
-if not, try with an OTG disk inserted and do the same as above.
-if not, type on pc terminal: adb reboot recovery before connecting your phone.
Good luck.
Hey, thanks a lot for your reply
I have tried all the steps you've described me and I unfortunately can't reach recovery.
It seems as if the phone is reacting to it though as a black screen screen is displayed much longer than usual, although a few seconds later, the MI splash screen appears once again. Also, I can hear the beep from the pc when the phone connects but it keeps disconnecting 1 second later and proceeds to reboot. Seems like recovery is corrupted or something...
The phone does not show up under adb devices throughout the whole process. My pc only recognizes the usb port being connected (when the beeps are triggered) but does not identify the device as an android device.

Categories

Resources