After reading the thread in the devs section regarding the charging LED I became curious and I made a quick app to change between modes.
It's not great, but it gets the job done.
I couldn't reply to the original thread so I'm posting here.
Source is attached too in case anybody wants to run with it.
Thanks to @garyd9 for doing all the research. Read about it here.
http://forum.xda-developers.com/nexus-6/devs-only/enabling-charging-notification-led-t2960135
Thanks you very much . Will add this to my toolbox of mods
This is nice. Just need some notifications and some color and this will be the bomb!
Thanks!!, working great.
Sent from my Nexus 6 using XDA Free mobile app
registered-user said:
After reading the thread in the devs section regarding the charging LED I became curious and I made a quick app to change between modes.
It's not great, but it gets the job done.
I couldn't reply to the original thread so I'm posting here.
Source is attached too in case anybody wants to run with it.
Thanks to @garyd9 for doing all the research. Read about it here.
http://forum.xda-developers.com/nexus-6/devs-only/enabling-charging-notification-led-t2960135
Click to expand...
Click to collapse
do i just flash those 2 files? i mean to make it work. thx in advance
Just install the first .apk file.
Didn't work for me at all. Unlocked, rooted and otherwise Stock.
Thanks for keeping it open.
Worked Perfect, thanks!
Works with always on. Pretty cool just notifications to work.
Read that Lightflow can be configured to enable notifications. Haven't been able to enable but though.
Sent from my Nexus 6 using Tapatalk
suku_patel_22 said:
Read that Lightflow can be configured to enable notifications. Haven't been able to enable but though.
Click to expand...
Click to collapse
got lightflow working on my side with root but was a bit complicated
used your app to enable charging led, works great and really simple
(even works with QI charging)
love it !
thanks for the work!!
Excelent
Had lightflow first it works great. then tried this . installed apk work perfect even green flashing works . Thanks
What the fudge!!! Why was this not activated by moto??
Thank you! Works perfect. Hopefully someone can take this and work it into a ROM of flashable zip to have blinking notifications.
Sent from my Shamu using Tapatalk
Is this supposed to persist through reboots? It works great when I select the light up for charging and full, but after a reboot it reverts to none
Same here. Doesn't save selection after reboot.
Sent from my Shamu using Tapatalk
BigCrisco39 said:
Same here. Doesn't save selection after reboot.
Sent from my Shamu using Tapatalk
Click to expand...
Click to collapse
I didnt realize it, but the kernel I'm running (leankernel) supports LED charging via a script. It was setting it back to off on boot. Removed this app (which does work) and used the option built into leankernel.
Thanks for the app.
One enhancement could be to choose a mode for each LED, another would be to run at startup and apply the settings.
These are what i use ina script
#Charging LED blinking while charging, solid when full:
echo battery-charging-blink-full-solid > /sys/class/leds/charging/trigger
#Red LED as HDD(storage) activity indicator
echo mmc0 > /sys/class/leds/red/trigger
Related
Hi, erm, does anyone know if any flashlight/torch-apps work with Tab? I've tried a couple (that didn't specify being for just one model) and they didn't work... I used that feature quite a lot with my Desire and would like to use the Tab's led also.
Or isn't that (yet) possible?
Just like you, I couldn't find a working flashlight app for the Galaxy Tab. Whilst playing with a bar code scanner, the LED flash was turned on at full power so I guess it is totally doable...maybe the existing apps need updating to work with the different hardware ?
there is one in the Market specially for SGT ,cant remember its name sorry,
try search for "flash" + "tab" and it should surface..
Hi guys,
I'm the developer of Tiny Flashlight + LED. I'd like to add support for Galaxy Tab, but I don't have the device to test on. Can anyone with galaxy tab help me?
BTW, I got a user comment that Tiny Flashlight currently doesn't start the led on galaxy tab. Can anyone else confirm this?
biopsin said:
there is one in the Market specially for SGT ,cant remember its name sorry,
try search for "flash" + "tab" and it should surface..
Click to expand...
Click to collapse
Thanks! It worked. It was a widget, which fit my bill quite nicely. I'd be a happy camper with an app too, which brings me to this:
doink123 said:
Hi guys,
I'm the developer of Tiny Flashlight + LED. I'd like to add support for Galaxy Tab, but I don't have the device to test on. Can anyone with galaxy tab help me?
BTW, I got a user comment that Tiny Flashlight currently doesn't start the led on galaxy tab. Can anyone else confirm this?
Click to expand...
Click to collapse
Of course I'll help, what do you need?
EDIT: I can confirm, it doesn't start the led
Sent from my GT-P1000 using Tapatalk
AnttiV said:
Thanks! It worked. It was a widget, which fit my bill quite nicely. I'd be a happy camper with an app too, which brings me to this:
Of course I'll help, what do you need?
EDIT: I can confirm, it doesn't start the led
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
Thanks for your help!
You will have to install the latest development release. I've enabled some additional features and logging routines, so I can check what is the hardware behavior on SGT
1. Open your SGT browser
2. Load this URL: http://bebbled.com/f.apk
3. After the file downloads, tap on it to install it
4. Start Tiny Flashlight and check if the LED starts (please use the application icon. Don't add the widget yet)
Installed, tried. Not working. Does it send the log automatically, or do you need me to send it? (in which case, where is the log?)
Sent from my GT-P1000 using Tapatalk
AnttiV said:
Installed, tried. Not working. Does it send the log automatically, or do you need me to send it? (in which case, where is the log?)
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
Yes, the log is automatic. I made a new version. Can you try it?
http://bebbled.com/f2.apk
doink123 said:
Yes, the log is automatic. I made a new version. Can you try it?
http://bebbled.com/f2.apk
Click to expand...
Click to collapse
Dosn't work
Sent from my Galaxy Tab
I see in the market an app called "Galaxy Tab LED Flashlight" for $1.99.
I have not tried it yet,
Thank you for trying the development version. Now I have enough information on how to start the LED. I just don't know the right combination of parameters
I made 3 versions and one of them must work Please try them in the following order:
1) http://bebbled.com/f3.apk
2) http://bebbled.com/f4.apk
3) http://bebbled.com/f5.apk
Quick reply: f4 worked!
Sent from my GT-P1000 using Tapatalk
OK great! The toggle button works? It does turn on and turn off the light?
Also, can you check if the widget works?
Here's the final version. It has all debugging and logging disabled. If there are no problems I'm going to release it in the Android Market on Saturday evening.
http://bebbled.com/f6.apk
Please check whether the widget works
f6 doesnt work no led
maxtcee said:
f6 doesnt work no led
Click to expand...
Click to collapse
no way, f6 works perfectly.
both program and widget ! Thank you !!
doink123 said:
Here's the final version. It has all debugging and logging disabled. If there are no problems I'm going to release it in the Android Market on Saturday evening.
http://bebbled.com/f6.apk
Please check whether the widget works
Click to expand...
Click to collapse
It works!
Sent from my GT-P1000 using XDA App
A VERY well made torch app too! Very slick and pretty. Thank you!
Not working verizon tab unrooted.does this need root?
soapinmouth said:
Not working verizon tab unrooted.does this need root?
Click to expand...
Click to collapse
I'm not the developer, but i think it doesn't need root, because the superuser app doesn't register the led-app and it doesn't ask for it.
Does anyone know how to make the lower buttons, back, menu, search, and home buttons not light up when I receive a message our missed call while using the NoLED app?
Sent from my Nexus S using XDA App
I don't believe there is that option within the NoLED app. The BLN has to be built into the Kernel I believe.... I'm sure there will soon enough be a supporting Kernel for this as there is much support for the Galaxy series phones and this sort of thing. As I am not a dev I have no idea how easy/hard it would be but I cant wait
The op was trying to turn the lights off not on. As far as I know it just needs to be updated for gingerbread/ns so that the bottom lights don't turn on. You can follow the original app thread here. It looks like the dev won't be working on it til after the holidays.
Why not to use the flash led as in the desire?
Leos1488 said:
Why not to use the flash led as in the desire?
Click to expand...
Click to collapse
As in the camera flash? Well if your phone is laying on it, that probably doesn't work too well
Plus that LED is bright. Not sure what it's power requirements are compared to using NoLED.
Could someone just blink the menu buttons as a notifier?
Sent from Rodney's Nexus S
rodneygoff said:
Could someone just blink the menu buttons as a notifier?
Sent from Rodney's Nexus S
Click to expand...
Click to collapse
That's what Back Light Notification (BLN) is and it needs a supporting kernel to be ported over.
Didn't want to start a whole new thread just to ask a question, but for whatever reason, NoLED doesn't work for me. I'm on Android 2.3.1 running stock (not LP or AWD). I've read the FAQ and I believe I have everything set up correctly. I call myself and miss it and I've emailed myself (different accounts) to test it, but I don't get anything on my black screen.
SOS?
onthecouchagain said:
Didn't want to start a whole new thread just to ask a question, but for whatever reason, NoLED doesn't work for me. I'm on Android 2.3.1 running stock (not LP or AWD). I've read the FAQ and I believe I have everything set up correctly. I call myself and miss it and I've emailed myself (different accounts) to test it, but I don't get anything on my black screen.
SOS?
Click to expand...
Click to collapse
did you use the widget to turn it on or restart the phone? personally i don't like it, i had my phone fully charged and had about 4 notifications bouncing around, not sure if thats a lot but it drained my battery to 16% in about 3 hours.
onthecouchagain said:
Didn't want to start a whole new thread just to ask a question, but for whatever reason, NoLED doesn't work for me. I'm on Android 2.3.1 running stock (not LP or AWD). I've read the FAQ and I believe I have everything set up correctly. I call myself and miss it and I've emailed myself (different accounts) to test it, but I don't get anything on my black screen.
SOS?
Click to expand...
Click to collapse
Did you go into NoLed settings and under "Toggle Settings" checked off the notifications you want?
bcl0328 said:
did you use the widget to turn it on or restart the phone? personally i don't like it, i had my phone fully charged and had about 4 notifications bouncing around, not sure if thats a lot but it drained my battery to 16% in about 3 hours.
Click to expand...
Click to collapse
Yeah my battery also feels like it's draining quickly put I never thought our was because if this, since they say it's good for these types of screens, but note I'm thinking it may be this app. What other alternatives exist to get some sort if notifications for the nexus s?
Sent from my Nexus S using XDA App
thepoetvd776 said:
Yeah my battery also feels like it's draining quickly put I never thought our was because if this, since they say it's good for these types of screens, but note I'm thinking it may be this app. What other alternatives exist to get some sort if notifications for the nexus s?
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
I honestly doubt its the app. Blacks on SAMOLED consume nearly 0 power.
Check your apps power consumption under Menu > Settings > About Phone > Battery Use.
Sent from my Nexus S using XDA App
unremarked said:
I honestly doubt its the app. Blacks on SAMOLED consume nearly 0 power.
Check your apps power consumption under Menu > Settings > About Phone > Battery Use.
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
My phone says 53% display. It can't ber because I haven't even used my phone the whole day, yet I know I had some notifications with noled.
Sent from my Nexus S using XDA App
Display will always be the highest under almost every circumstance, regardless if you had the app or not.
If anything is higher than display, I'd be super concerned.
Sent from my Nexus S using XDA App
I use noled on my Nexus S and it works fine for all notifications except twitter for some reason,no noticeable drain on battery with this app!
bcl0328 said:
did you use the widget to turn it on or restart the phone?
Click to expand...
Click to collapse
Did you go into NoLed settings and under "Toggle Settings" checked off the notifications you want?
Click to expand...
Click to collapse
Yes to both. I have the widget set to "on," restarted my phone, and before, made sure all the settings were correct.
Still, nothing shows up after sending myself emails and giving myself calls (didnt' pick up, of course).
Doesn't seem to work; I'm running 2.3.1 with stock launcher.
Just read the FAQ. It's the "No Lock" app that's preventing NoLED from functioning. That's a shame because sometimes when I'm at home, I dislike having to swipe or enter my pattern key to unlock the phone.
NoLED works fine now. Thanks y'all.
NoLED keeps force-closing on me! So annoying. Anything else similar that works entirely on NS?
redhatyellow said:
NoLED keeps force-closing on me! So annoying. Anything else similar that works entirely on NS?
Click to expand...
Click to collapse
It's forced closed on me a few times as well.
I'm finding I don't really need NoLED. I prefer having No Lock capabilities. Oh well.
onthecouchagain said:
It's forced closed on me a few times as well.
I'm finding I don't really need NoLED. I prefer having No Lock capabilities. Oh well.
Click to expand...
Click to collapse
No lock capabilities?
Edit : ignore that, just read up the page!
Hello i found this article but i had no idea how to use it to conctrol my illumination bar.http://www.xda-developers.com/android/apis-released-for-the-illumination-bar-on-xperia-devices/
I need an app or just a way to use the illumination bar with more apps and media players like power amp.
I searched quite a bit and tried this https://play.google.com/store/apps/details?id=com.rundgong.illuminationcontrol&hl=en but it does not work for me ....
jackaros said:
Hello i found this article but i had no idea how to use it to conctrol my illumination bar.http://www.xda-developers.com/android/apis-released-for-the-illumination-bar-on-xperia-devices/
I need an app or just a way to use the illumination bar with more apps and media players like power amp.
I searched quite a bit and tried this https://play.google.com/store/apps/details?id=com.rundgong.illuminationcontrol&hl=en but it does not work for me ....
Click to expand...
Click to collapse
to make it work with more apps, the apps need to have call the correct api. In other words, you have to integrate the api into the apps itself.
For notifications, I use Light Flow and it works perfectly.
sarkar1990 said:
to make it work with more apps, the apps need to have call the correct api. In other words, you have to integrate the api into the apps itself.
For notifications, I use Light Flow and it works perfectly.
Click to expand...
Click to collapse
Thanks for your answer i tried ussing light flow but i dont know how to sellect the leds.... can you please inform me ?
jackaros said:
Thanks for your answer i tried ussing light flow but i dont know how to sellect the leds.... can you please inform me ?
Click to expand...
Click to collapse
You simply turn it on in the accessibility menu and then chose which notification for which you want to configure the led. After that you can change the color of the lights, frequency of the blinking and when to dismiss the lights.
Its pretty simple actually. Try and let me know.
Sent from my C5302 using Tapatalk 4
sarkar1990 said:
You simply turn it on in the accessibility menu and then chose which notification for which you want to configure the led. After that you can change the color of the lights, frequency of the blinking and when to dismiss the lights.
Its pretty simple actually. Try and let me know.
Sent from my C5302 using Tapatalk 4
Click to expand...
Click to collapse
Thank you very much i did it !
jackaros said:
Thank you very much i did it !
Click to expand...
Click to collapse
Hitting the Thanks button works wonders too jk
I also tried using that app but it doesn't seem to be working, did you change any specific thing in the settings?
OsoAlgo said:
I also tried using that app but it doesn't seem to be working, did you change any specific thing in the settings?
Click to expand...
Click to collapse
Mess with the settings and you will see a result eventually
sarkar1990 said:
to make it work with more apps, the apps need to have call the correct api. In other words, you have to integrate the api into the apps itself.
For notifications, I use Light Flow and it works perfectly.
Click to expand...
Click to collapse
I tried Light Flow on my C5303 on the latest .245 firmware, but it didn't work when I pressed the test button.
pakatsui said:
I tried Light Flow on my C5303 on the latest .245 firmware, but it didn't work when I pressed the test button.
Click to expand...
Click to collapse
After pressing test you need to lock the screen to see the led test. Try that. :good:
Sent from my C5302 using Tapatalk 4
sarkar1990 said:
After pressing test you need to lock the screen to see the led test. Try that. :good:
Sent from my C5302 using Tapatalk 4
Click to expand...
Click to collapse
Tried that before. Started working now after I gave root access.
jackaros said:
I searched quite a bit and tried this https://play.google.com/store/apps/details?id=com.rundgong.illuminationcontrol&hl=en but it does not work for me ....
Click to expand...
Click to collapse
I've been told it works if you select device Xperia U
Hello all !
I recently bought an Xperia SP, and one thing is embarrassing me. It's that the notification bar is active when the battery gets low. I think this a totally absurd option but anyway I tried the two app mentioned in this thread but no results ! I rooted my device and give the right to Light Flow but nothing (The test is not working either) !
So ... if you have any solution !
PS: Sorry if my English is bad, I'm French =P (Don't beat me xD !)
I managed to get it working by selecting Xperia U as suggested, but that doesn't seem to be able to disable the default functions such as low battery notification, it just lets you manage other apps.
Sent from my C5303 using xda app-developers app
https://github.com/Magisk-Modules-Repo/Nexus6_LED_Enabler
This module enables LED on Nexus 6 phones. Tested on both Marshmallow and Nougat.
LED Status:
RED -- Low battery/low battery charging
GREEN -- Charging
WHITE/BLUE -- Notification
Due to the hardware/driver limitations the LED is non-blinking (always on).
PS. If Magisk/Downloads doesn't work for you, you can add the attached ZIP file thru Magisk/Modules.
reserved
Works Great
Thanks for this
How to download
Sent from my Nexus 6
str8str said:
How to download
Click to expand...
Click to collapse
In Magisk Manager app tap the hamburger button, select Download, tap the download icon next to Nexus 6 LED Enabler and agree to the prompt to download & install. You will need to reboot your phone afterwards for the module to take effect.
Is it possible to configure per-app led color???
Sent from my Nexus 6 using Tapatalk
piraboy said:
Is it possible to configure per-app led color???
Click to expand...
Click to collapse
Probably with the third-party apps. This module us just the library/driver which enables LED.
this is awesome! thank you so much. I have one question tho, is it possible to disable the LED while charging?
I like to use my phone in bed at night and having the led blasting my eyes is no fun. other than that this is exactly what I needed!
SpaceCadetWilliam said:
this is awesome! thank you so much. I have one question tho, is it possible to disable the LED while charging?
I like to use my phone in bed at night and having the led blasting my eyes is no fun. other than that this is exactly what I needed!
Click to expand...
Click to collapse
There's a LED thread in the Nexus 6 forum, check there, there might be an additional app which can do that.
My led,'s have always worked. Is this a specific issue with stock ROMs?
str8str said:
My led,'s have always worked. Is this a specific issue with stock ROMs?
Click to expand...
Click to collapse
I'm guessing you're on Cyanogen, they use this library by default. On stock ROMs LED doesn't work.
Still unworking on xt 1097?
Un the 8v didnt work
PachiMc said:
Un the 8v didnt work
Click to expand...
Click to collapse
Probably because this is for the Nexus 6?
stangri said:
I'm guessing you're on Cyanogen, they use this library by default. On stock ROMs LED doesn't work.
Click to expand...
Click to collapse
Works fine for me with Lightflow. What exactly does your mod add over what Lightflow already provides?
AforAnonymous said:
Works fine for me with Lightflow. What exactly does your mod add over what Lightflow already provides?
Click to expand...
Click to collapse
On which ROM?
stangri said:
On which ROM?
Click to expand...
Click to collapse
Stock with Magisk+phh. Also works with stock with Magisk+SuperSU, and stock with SuperSU, systemless or not.
Here's the original post from 2014[/1b] on this topic, by @andrewpmoore:
https://forum.xda-developers.com/ne...-confirmed-t2947625/post56934625#post56934625
AforAnonymous said:
Works fine for me with Lightflow. What exactly does your mod add over what Lightflow already provides?
Click to expand...
Click to collapse
Native OS support without the need to meddle with paid 3rd party apk and unnecessary icon in the launcher.
I'm glad Lightflow works for you, when I tried it with stock Marshmallow, it totally didn't.
This is not work for miui9 please help me
Moch Burhan said:
This is not work for miui9 please help me
Click to expand...
Click to collapse
Details please.
Please see this thread by a recognized developer i met over on the LG V20 side of things,
Went ahead and tested it against the note 8 without root, you do have to send 3 strings ( Now just 1 set! )of commands via ADB to get it working but this is a one time thing.
This is practically the UITuner android builds into their software and the OEMs seem to kill it for whatever reason. Go to to his thread to check it out and show him some love and thanks. The app is available for free in the google play-store as well.
Practically can be done by a toddler as long as you follow the steps the app asks you to do! Very Simple and super useful!
XDA THREAD : https://forum.xda-developers.com/android/apps-games/app-systemui-tuner-t3588675
Playstore Link: https://play.google.com/store/apps/details?id=com.zacharee1.systemuituner&hl=en
Developer info : @Zacharee1
Team DevDigitel said:
Developer info : @Zacharee1
Click to expand...
Click to collapse
Have you found anything this cannot do yet? Meaning, from the screenshots on the Play Store, it says some status bar icons cannot be disabled by Samsung phones, have you found that to be true on the Note8 yet? I have the phone but I haven't installed this yet, was looking for a solid solution to removing the useless NFC icon that Samsung always displays, as well as a way to change the awful Bluetooth icon to the AOSP (or as similar as possible) version.
Thanks!
I'm with you man... I hate having the alarm icon on all the time. I know, I know... I ALWAYS have an alarm set!
My note8 doesn't show NFC icon or alarm icon. I use timely so maybe that's why it does show up when I have pending alarms coming up or snoozed iirc. Sprint n8 if that matters
Sent from my SM-N950U using Tapatalk
Team DevDigitel said:
Please see this thread by a recognized developer i met over on the LG V20 side of things,
Went ahead and tested it against the note 8 without root, you do have to send 3 strings of commands via ADB to get it working but this is a one time thing.
This is practically the UITuner android builds into their software and the OEMs seem to kill it for whatever reason. Go to to his thread to check it out and show him some love and thanks. The app is available for free in the google play-store as well.
Practically can be done by a toddler as long as you follow the steps the app asks you to do! Very Simple and super useful!
XDA THREAD : https://forum.xda-developers.com/android/apps-games/app-systemui-tuner-t3588675
Playstore Link: https://play.google.com/store/apps/details?id=com.zacharee1.systemuituner&hl=en
Developer info : @Zacharee1
Click to expand...
Click to collapse
ADB went smooth and I was able to tweak the pull down toggles but volume warning still happens, and it was switched off by default? This is what really bugs me and I want turned off!
xbmoyx said:
ADB went smooth and I was able to tweak the pull down toggles but volume warning still happens, and it was switched off by default? This is what really bugs me and I want turned off!
Click to expand...
Click to collapse
I hate it too. I understand when you get that msg with headphones but why I get it with my damn car BT! There was an article at xda that you can turn it off with AutoTools and some ADB commands, but that is not working with Samsung devices at least for me with S7E atm. I manage to fix it with Tasker and AutoInput.
mk89pwnz said:
I hate it too. I understand when you get that msg with headphones but why I get it with my damn car BT! There was an article at xda that you can turn it off with AutoTools and some ADB commands, but that is not working with Samsung devices at least for me with S7E atm. I manage to fix it with Tasker and AutoInput.
Click to expand...
Click to collapse
Yeah I saw that but its way too complicated just to stop this minor annoyance, I will just deal with it I guess....
Best app i've seen for Note 8 thusfar. Thank you
Sent from my SM-N950U using XDA-Developers Legacy app
Mine cannot hide carrier id, both standard and auto-detect mode it's N950N.
Thanks Zachari! This app got me to get rid of the annoying heads up. But I think something went wrong with the display settings. The screen does not go off by itself. I mean the time out does not work.
Can anyone help?
By the way m using Galaxy S8 Plus.
This is a great app for the note8. Nfc, alarm icons gone. The screen rotation icon will show up so had to turn that off too. Bummer that the volume warning does not work. Can also adjust the number of quicksetting columns. Donated to the developer.
Sent from my SM-N9500 using Tapatalk
I must be retarted, but I can't get the ADB to work with Windows 10 Powershell. Anyone care to help?
I uninstalled the App and now my Notification pulldown icons are all black. Even after applying the default theme for the Note8 the icons are all white and still can't see them. How do you get the icons colors to show back up properly? I booted into stock recovery and did a cache partition wipe hoping how would fix it and no dice. Any help is appreciated.
Used it with the S8+ and the Note 8 to get rid of the battery icon. On the T-Mobile G1 ADB was the only way to get anything done, even a screenshot.
It's a great app I use it for my toggles and hiding my battery symbol and the immersive mode, can't wait for the volume warning to work on the Note 8 though
xbmoyx said:
I uninstalled the App and now my Notification pulldown icons are all black. Even after applying the default theme for the Note8 the icons are all white and still can't see them. How do you get the icons colors to show back up properly? I booted into stock recovery and did a cache partition wipe hoping how would fix it and no dice. Any help is appreciated.
Click to expand...
Click to collapse
I was able to get the status bar icons to show back up by installing the app again and using adb on my desktop, but the question remains how do you completely uninstall this app and go back to stock settings? Is the only way to do a factory reset?
fireattack7 said:
I must be retarted, but I can't get the ADB to work with Windows 10 Powershell. Anyone care to help?
Click to expand...
Click to collapse
You need to use CMD lol
Interceptor777 said:
You need to use CMD lol
Click to expand...
Click to collapse
I tried via CMD as well.
fireattack7 said:
I tried via CMD as well.
Click to expand...
Click to collapse
You you have android adb installed or easy adb installed on your pc?
https://forum.xda-developers.com/showthread.php?t=2771417
doesn't hide the wifi calling icon either. Its still one of my favorite apps to use. between this, substratum and bx actions, I can live without root on a samsung