Related
I'm going to post one at a time...so the pictures don't get confused with others. I hope this helps
.....1.....The SNP Tempered Glass Protector (Price $32.00)
This one took a long time to receive it since it was coming from Korea with really slow cheap shipment, but the product had no damage so it was all good.
I thought I did good installation on the Tempered glass protector, but all around the edges I had gap (You can see it from the pictures). I contacted the seller and they told me that this screen protector is not for Verizon model, because of the 1mm curved edges. I guess the Korean version of the G2 don't have curved edges and I don't know about Atnt or Tmobile models.
So they gave me a full refund, since they didn't mention that it is not for Verizon models.
But if you have the Korean Version of the phone I really recommend it.
The Tempered glass protector covers close to edge to edge. The responsiveness and the clarity is excellent. The feel of this screen protector is really good. My fingers were sliding across really easy. Edges are smooth rounded so it feels smooth all around the edges.
Since the protector is close to edge to edge you can't use cases like the Diztronic cases or SGP Slim armor, etc. since it interfere with the screen protector that it will lift up the screen protector.
So you have to use the ones like Poetic Palette or Incipio Feather cases or etc.
Even though it had gaps all around the edges I have use this screen protector for 2 weeks and I had no issue with clarity or sensitivity. Overall performance of this tempered glass protector is really fantastic. If this had fit my phone then this one was a keeper...but It was just sad that it didn't fit my G2.
.....2..... Scosche 2.1A High Amp Dual USB Car Charger (Price $6.00)
If you are looking for fast dual USB car charger this one works out great. Like other dual USB car chargers have one 2.1A and one 1.0A Charging ports but Scosche car charging ports are both 2.1A charging ports. In other words...Scosche car chargers will charge 2 devices about the same speed as the OEM wall charger that you got when you bought your G2. It charges really fast.
Overall performance is really excellent. I have used this car charger for over 2 weeks now and have no problem so far. This just does exactly what it is suppose to do. It charges the phone as fast as the rapid wall charger, so this is a keeper for me. In my opinion this car charger is cheap compare other car chargers that charges slower than this.
.....3.....The Hohoo 9H Screen Protector (Price $12.50)
First this screen protector is NOT TEMPERED GLASS SCREEN PROTECTOR. This screen protector is made out of PMMA (Poly Methyl Methacrylate), it's basically acrylic. Im saying this because some of the sellers are posting this as a tempered glass protector when it is clearly not. There is a reason why the price point is low.
This one was a defected product which the top part of the screen protector adhesive part was not good that it made air gaps and if I leave it on for a couple of minutes it lifts up by itself, so I contacted the seller and the seller told me that he is sending a new one for me.
The installation wasn't that hard. The screen response was good and the screen clarity was really good. It feel like I was touching a tempered glass screen protector. My fingers glide really smooth. The screen protector size is basically little bit bigger than the screen, but it doesn't cover up the whole front side. In my opinion this is a really good size for the screen protector. Since I can put on Diztronic TPU cases without interfering with the screen protector (just has a tiny gap between the screen protector and the case edges).
Even though this was a defected product everything really work great except for the adhesive part. Going to wait for new one for my final opinion on this screen protector.
...4....The Hohoo 9H Screen Protector (Replacement)
I have received the replacement screen protector and the first thing that I have notice was that the boxing image was different from the first one that they have sent me. The next thing that was different was when I was installing it was the sensor area cut out. It doesn't make a huge difference but just fyi.
The second screen protector that I received had really good adhesives so I didn't get any air gaps. I had no issue with any sensitivity. The screen protector feels really smooth and my fingers slides through easily. The best part about this protector is that the size. I really think this is the best screen protector size for VZW G2.
I really like this screen protector but one problem for me with the screen protector was when I go outside in a really cold weather (near about 0°C) the protector just lifts up by itself for some reason. But if I put it back in a room temperature for a bit it start sticking back to the screen...I have tested 5 times doing this and also sent an email to the seller and the seller just gave me a refund. But in room temperature it doesn't have any problem. The adhesive is actually really good that even though I reattached it more than 5 times it didn't made any gaps or lifting in room temperature. This might be the material of the screen protector problem or I might have got a bad batch but in my experience it happen like that.
Overall performance is excellent. If I didn't had any issue with the lifting then this screen protector was a keeper for me. In my opinion the feel and strength and display is in the same level as the tempered glass protector. If you want tempered glass protector like features without paying a lot. This screen protector might fit for you.
I still have this screen protector on since I don't have any issue in room temperature. But I just have order a new tempered glass protector made from Glassview. It should be coming soon so until then I'm going to keep using this screen protector.
.....5..... Diztronic Cases (Price $10.00)
First impression with these cases were that it's really slim case. Diztronic cases are made out of TPU material. I have purchase two of Diztronic cases, matted black and clear type. Both types of cases have really good grip. The matted black case had so much better resistance against finger prints than the clear case. The matted black case had little bit more slippery feeling than the clear case, but the Matted black looks better than the clear one in my opinion. One final difference between these two types of cases is that the matted black case is $1 more expensive than the clear case.
All the cut out holes were perfectly aligned. On the top it has a lip that even though you put it face down it will protect from the screen touching the surface. This case purpose is basically to protect against everyday use scratches. If you drop the phone with this case on I really don't think this case will protect it from saving your phone.
Overall, if you want a slim case that doesn't any much bulk and protects every corner of your phone this is perfect. But for some reason if you think you will drop the phone get more bulkier case like Otterbox or Incipio Dualpro or etc.
.....6.....Incipio Feather Shine Case (Price $29.99)
I have used this case for over 2 weeks now and it is just perfect for me. Especially the back aluminum finish looks really nice and I don't have to worry about finger prints on the back of my phone anymore. The case fits really tight so there is no worry that the phone is just going to fall off from the case. This case is a really low profile case that it only covers the back and the sides and the four corners of the phone, but not covering the bottom and the top of the phone. This case have slightly lower profile than the Diztronic cases. It has a really small lip on the side of the phone. The lip of the case was about the same size as my screen protector that if I put it face down the screen protector is touching the bottom too. Since my screen protector's thickness is around 0.33mm so I'm assuming that the lip size is around 0.33mm. I'm not too worry about putting my phone face down since the screen protector I have so far stood up pretty good, but if you don't have screen protector just be careful if you are putting it face down.
The back aluminum finish looks nice but it makes the phone a bit slippery. I got some scratches on the aluminum finished back already, I think these scratches came from the keys that was in my pocket. I mean the phone case purpose is to prevent from scratching the actual phone so it is doing its job but it got scratched way too easily than what I was expecting from this case. I think my Hohoo screen protector is so much better against scratches than the aluminum finished case since my screen protector haven't got any scratches so far.
A lot of people complain about this case because of the signal lost, but to me so far I have not lost any signals or the case cause a weak signal. I'm getting the same signal bar with or without the case. I think some people complaining about the signal lost with this case on have got a bad batch of the case.
Overall, I think if you want a really low profile case with really nice look on the back then this case might be good for you. This is not a drop proof case. It's the same thing that I said about Diztronic cases, this is not the case that you want if you think you are going to drop your phone. This case is basically to prevent from everyday scratches.
Did you ever receive that screen protector from Glassview?
Do the screen protectors need to specifically say for verizon? Or are they compatible with any model? I want to buy some screen protectors but they dont specify what model just lg g2
kalooann said:
.....5..... Diztronic Cases (Price $10.00)
Click to expand...
Click to collapse
This is definitely a great case for those who are looking for something to make the phone a little easier to hold and protect the back from scratches. The outer lip lets me put my phone face down whereas before I would be afraid of scratching the screen.
Heres an older thread for those interested in more pics. http://forum.xda-developers.com/showthread.php?t=2461151
JRJ442 said:
Did you ever receive that screen protector from Glassview?
Click to expand...
Click to collapse
Yes I have received the Glassview Tempered Glass protector...Im using it right now for a couple of days to see if this is good or not. So far I like it.
Ill post pictures later.
So is that why the screen protectors that Verizon sold me isnt working with the cheap rubber case I have that came with it, until I can get a new one. Tempered glass?
blueis300 said:
So is that why the screen protectors that Verizon sold me isnt working with the cheap rubber case I have that came with it, until I can get a new one. Tempered glass?
Click to expand...
Click to collapse
....what are you talking about...
I use the VZW Screen Protectors they had because I got 20% off the phone (when you buy 2 accessories) and they were like $7 for 3. The VZW guy didn't put it on very well but I used the second one and a hinge method to get it perfectly aligned and centered.
I use a Incipio Feather Rubber Matte Case and it doesn't affect the Screen Protector. The Diztronics are cool but I don't like the big lips around the edges that will screw with the protector sometimes. No problems with the Incipio.
Screen protectors are compatible for all models of G2. Only the Verizon Cases are different because I guess it is a 1mm thicker due to addition of Qi Charging.
the SNP Tempered Glass Protector fit in international model D802??
What do you like better, Diz or the Feather?
trifos said:
the SNP Tempered Glass Protector fit in international model D802??
Click to expand...
Click to collapse
I think so, but if I were you Ill just buy Glassview Tempered Glass Protector than SNP.
IamPro said:
What do you like better, Diz or the Feather?
Click to expand...
Click to collapse
I like both but Im using Feather Shine more than Diz right now.
.....7.....GlassView Tempered Glass Protector (Price $32.99)
I have used this Tempered Glass Protector for over 2 weeks now and I think this is the one that I'm going to keep.
First, the application process was really easy for me. I installed it in like 30s and was done with perfect alignment. The size and the cutout of this screen protector is just perfect. It avoid all the lifting all around the screen and it is really case friendly that it fits the Diztronic cases. Im not too sure about the bulkier cases like the otterbox or bulkier incipio cases since these cases use up a lot of bezel space. The Thickness is only 0.23mm but The quality of the screen protector is really good. It has 9H hardness that suppose to prevent from everyday scratches and more and it is also shatterproof. The sensitivity and feel of this screen protector is just fantastic. I had no issue with responsiveness and my fingers were gliding through really smoothly. It was really easy to wipes off the fingerprints from the screen protector. Between SNP and Hohoo Screen protector feel of the smoothness wise GlassView is a clear winner for me.
I think this tempered glass is better than the MIME Tempered Glass. Since MIME Tempered Glass is cut short on the sides that doesn't really completely cover the screen but GlassView is covers the whole screen.
Overall, I think this is the best Tempered Glass screen protector that you can find on the market right now (at least for me). I thought about buying iloome flex but it looked too thin and I really don't see that much difference between just regular screen protector and iloome flex. I wanted more sturdy screen protector and I think I found my winner. I think I'm going to stick with GlassView tempered glass protector for a quite a bit before I find something that is better.
It seems that all currently available on AliExpress (at least) tempered glass protection are flawed, because of:
1- Protectors that covers the body in full, and has some black areas: has actually glue only on the black non-transparent zones, but nothing on display area it self (so only display ages, upper and lower parts has glue), this makes it rubbish, because it will not stick well to the screen, one or two gaming sessions and it will end in recycle bin.
2- Fully transparent one, with full screen coverage: because 1+5 has 2.5D screen, those covers will not stick well on phone edges since tempered glass is rigid, this maybe can be used only with covers that overlap edges of the screen also.
3-Fully transparent one that don't cover all of the screen: those usually stick well, but only if they left about 5mm on each edge uncovered! I believe it is clear that such a gap ruins the protective purpose of the tempered glass, aside the ugly look due to gaps. (Again, having an edge overlapping cover could make it look better)
So it seems the only practical option for now is to use usual non glass protection unfortunately.
If I missed something or you have some suggestions please let me know..Some manufacturers claims that there protector is 4D, what means that it should solve all above issues, i didn't try those yet, anybody tested them?
I am regretting removing original 1+5 protection
As I bought and still use an Orzly tempered glass protector I concur with your analysis at this time. When I first applied the Orzly is was perfect without the issues some experienced but after 3+ weeks the sides must have lifted slightly due to my bumper case and dust particles got underneath next to the left/right buttons. Since then I've been religiously looking for an alternate that passes the case test but none so far have come to light.
I like the feel of the tempered glass so much that I've resisting going back to the film/plastic alternatives which I had always used in the past. I'm even considering going naked on the screen, relying on Gorilla Glass 5, but continue with a bumper case. Or the reverse, by using an Orzly but with no bumper case as I already have a dBrand skin applied. None of those options seem all that appealing. The one protector that seems to work with a 2.5D screen is the Galaxy 8's Whitestone Dome Glass but it's a crazy expensive $41USD and difficult to apply. I'm not sure even if a OnePlus 5 version was available I'd spend that much money.
I haven't had any luck with any tempered glass., due to point 2 which has been raised:
2- Fully transparent one, with full screen coverage: because 1+5 has 2.5D screen, those covers will not stick well on phone edges since tempered glass is rigid, this maybe can be used only with covers that overlap edges of the screen also.
Click to expand...
Click to collapse
After reading all of the reviews I decided just to leave the plastic one on until someone gets their act together and offers a proper tgsp for the OP5
Sent from my OnePlus5 using XDA Labs
Agreed with OP and all of above. I had and still have the Orzly TG protector on, but dust underneath. I want to go back to the usual plastic ones, but don't know which one covers as well/much as the original one that came with the phone. Any recommendations?
Sent from my ONEPLUS A5000 using Tapatalk
Im still waiting for my Nilkin glass protector to arrive (it's almost been a month, sigh)
If this one has the same issue as the ones I've tried before it (lack of adhesive around the edges), I'm going to try and go back to using plastic screen protectors.
I don't want to use my device without one, but I also hate how these glass protectors don't fully adhere to the screen around the sides (including top and bottom)
Biuzko tempered glass screen protector from Amazon had been working perfectly for me for many weeks.
Megaflop666 said:
Biuzko tempered glass screen protector from Amazon had been working perfectly for me for many weeks.
Click to expand...
Click to collapse
Can anybody confirm this?
on yt you have a channel big ubox and there one guy test a lot of tempered glasses and cover for OP5 also the Biuzko one.
graja84 said:
on yt you have a channel big ubox and there one guy test a lot of tempered glasses and cover for OP5 also the Biuzko one.
Click to expand...
Click to collapse
The YouTube channel you mention is also my favorite choice for screen protector info for the Oneplus 5. He always tests the protectors with various cases. His branding of the channel can get annoying but his market coverage is excellent and vast. With the plethora of tempered screen protectors its your choice for an accompanying case that often makes a big difference in your satisfaction. Here is the Big unBox - Biuzko review.
One thing I noticed is when the Big unBox applied the Official OnePlus 5 tgsp video it had lots of bubbles on the edges that he said couldn't be removed while I watched XDA's TK review and his application looked perfect with TK giving it a thumbs up. In the comment section of that review TK said all was well even after a month of usage. I was surprised as the Official tgsp has garnered horrible reviews and comments in the XDA Oneplus 5 accessories section. The most consistent criticism of the Official tgsp is that it cuts off a tiny fraction of the screen. In fact, so far my research indicates all of the "Full Adhesive", "Full coverage" tgsp cut off part of the screen. Personally I think the reason they have a black line on the edges is to hide inevitable bubbles due to the curved edge. The thicker the tempered glass the wider the side black stripes (e.g. Orzly versus Official).
Here is the criteria I'm using in selecting a replacement for my Orzly tgsp and cheap bumper case. Note that I've already installed a dBrand skin so that skews my criteria somewhat.
Tempered Glass screen protector:
- Must have full adhesive (not just top/bottom and side adhesion) and full coverage
- Would prefer, but am a tiny bit flexible on, part of the screen being cut off (limit is that not one pixel of the notification bar's clock is trimmed)
- Must have an oleophobic coating
Case:
- Needs to be as non intrusive as possible adding grip but not greatly ruining the sleekness of the phone
- Uses a minimalist design and/or clear materials so as not to obstruct viewing of the dBrand skin I've installed
- With the case on the buttons (power and volume rocker) must not be difficult to press
So far my research has me leaning towards the Official OnePlus 5 or Biuzko tgsp with a Rhinoshield Crashguard case. My one issue is that the Rhinoshield reviews always mention how difficult the volume rocker buttons are to press. Here is the video that has me leaning in that direction as is seems to best address my criteria
OnePlus 5 best case/protector setup
I'll being doing more reading and searching today hoping to find the unicorn of tgsp/case combinations. The dust under my Orzly is driving me mad but the feel and responsiveness of its surface has me rejecting a film/plastic protector alternative.
I'm using the Biuzko as well with the Tudia MERGE case no problems.
The trick is to first put OP5 in the case, THEN place the screen protector on. It fits perfectly, and you can't mess up the alignment since it falls right in. Then I just try to put pressure on the sticky parts for a few minutes.
I've had no problems for 3 weeks now.
I installed mine the same way, but I'm using the op5 carbon fiber case.
Sent from my ONEPLUS A5000 using Tapatalk
The original plastic cover was just perfect, is there is any possibility to find an équivalence ?
There's only tempered glasses on internet
akhage said:
The original plastic cover was just perfect, is there is any possibility to find an équivalence ?
There's only tempered glasses on internet
Click to expand...
Click to collapse
Hello,
I recommend you the plastic screen protectors from GadgetShieldz. I made a review about it on another post on xda but to summarize, it's a bit difficult to apply but then it's great. The screen looks good and it's cheap ^^ highly recommend.
FYI, I was struggling with TGSP for the OP5 and I just gave up. There is no good alternative atm.
TMSxXDA said:
It seems that all currently available on AliExpress (at least) tempered glass protection are flawed, because of:
1- Protectors that covers the body in full, and has some black areas: has actually glue only on the black non-transparent zones, but nothing on display area it self (so only display ages, upper and lower parts has glue), this makes it rubbish, because it will not stick well to the screen, one or two gaming sessions and it will end in recycle bin.
2- Fully transparent one, with full screen coverage: because 1+5 has 2.5D screen, those covers will not stick well on phone edges since tempered glass is rigid, this maybe can be used only with covers that overlap edges of the screen also.
3-Fully transparent one that don't cover all of the screen: those usually stick well, but only if they left about 5mm on each edge uncovered! I believe it is clear that such a gap ruins the protective purpose of the tempered glass, aside the ugly look due to gaps. (Again, having an edge overlapping cover could make it look better)
So it seems the only practical option for now is to use usual non glass protection unfortunately.
If I missed something or you have some suggestions please let me know..Some manufacturers claims that there protector is 4D, what means that it should solve all above issues, i didn't try those yet, anybody tested them?
I am regretting removing original 1+5 protection
Click to expand...
Click to collapse
Thanks for this, I recently just applied it and noticed all the issues you raised.
akhage said:
The original plastic cover was just perfect, is there is any possibility to find an équivalence ?
There's only tempered glasses on internet
Click to expand...
Click to collapse
Skinomi makes a wet application protector in both clear and matte. I posted pics of the matte version here. Since that post, I've experienced no scratches or orange peel effect. It's also great for no fingerprints.
You can always get the Nillkin H+ Pro, but only if you are using a spigen case or otterbox. Right now I am using the Spigen Rugged Armor with Nillkin H+ Pro and the gap between the glass and the case is around 1 mm (i would say 1.5 mm if I have to be more accurate). The Otterbox case is even better but I find it too bulky, tried it once for an hour and I did not enjoy it, but some of you may like it.
Few words about the Nillkin H+ Pro.
I know there are few variants of the Nillkin glass and I have tried all of them in the past. In my opinion the best glass is exactly the H+ Pro even tho it is a 1 dollar more expensive. The glass has zero rainbow effect or halo effect, it is 99 to 100% clear. It has amazing orleophobic coating. My Honor 8 has the same glass for 6 months now and it is flawless. I am going to change my nillkin glass with the official 3D tempered glass but only because I received the rhinoshield bumper. Otherwise I would not change my nillkin. You are going to get used to the small gap in a week or so.
Don't leave the phone without a glass.
I just applied mine, best screen protector I ever had, pure quality. Quote me on that
I love the official OnePlus screen protector, it's premium & looks good. Who ever made this thread is straight up wrong. The one he recommended is no Bueno, the glass part doesn't have enhesive. Look I am a OnePlus 5 conisuer, the screen protector is fantastic ?
I have siegen case. Can I buy the original screen protector from oneplus store with no problems? Or can I suggest me something with dust proof and oil proof ?
I've been thinking of getting something to protect my precious and the original plastic one has lots of scratches on it.
so Tempered glass or Hydrogel film?
I've been doing research on this question too. It's like a mixed reviews. But a commonly seen answer is that they regret getting the hydro gel version and stick to the conventional tempered glass as some buyers indicated after a few days, the edge came off peeling and trapping dust while some others has high static attracting dust and easily scratch.
I usually prefer Tempered glass.
Always glass, clarity and feel always superior to film.
A good brand would be Nillkin - I buy this off Ali express. The oleophobic coating is great and you can actually feel the smoothness difference vs a $2 cheapo glass protector.
http://s.aliexpress.com/rQje6z6R
I have bought it for multiple previous devices and am waiting for my Mate 10 glass delivery.
It is fragile though, have to be careful not to place it on the table face down with any sand or grit, it can scratch. Usually I have a case with a bit of a lip to protect it.
Obviously it can crack if you drop it also.
Sent from my ALP-L29 using Tapatalk
Anyone found a tempered glass protector that actually does not lift on the sides? Such a pity if one uses a glass that doesn't cover the whole display.. =(
Changed mine over to 9h yesterday. Just feels so much better than the plastic film.
Cccmachins said:
Changed mine over to 9h yesterday. Just feels so much better than the plastic film.
Click to expand...
Click to collapse
What brand did you get and does it cover the whole screen?
Ozero 2 pack from Amazon. Not a bad glass. No rainbow on the screen just a little thick. Like someone else said it makes you feel like your pressing into a hole with the thicker glass. They should taper the protector around the navigation button to make it feel better. Yeah covers all the screen. Except the bottom of the navigation button.
Pictures
Cccmachins said:
Ozero 2 pack from Amazon. Not a bad glass. No rainbow on the screen just a little thick. Like someone else said it makes you feel like your pressing into a hole with the thicker glass. They should taper the protector around the navigation button to make it feel better. Yeah covers all the screen. Except the bottom of the navigation button.
Click to expand...
Click to collapse
Can you post some pictures of the screen protector installed? I'm looking to get a screen protector myself but they are a number of brands I dont know and no reviews for any of them yet.
Jevansent said:
Always glass, clarity and feel always superior to film.
A good brand would be Nillkin - I buy this off Ali express. The oleophobic coating is great and you can actually feel the smoothness difference vs a $2 cheapo glass protector.
http://s.aliexpress.com/rQje6z6R
I have bought it for multiple previous devices and am waiting for my Mate 10 glass delivery.
It is fragile though, have to be careful not to place it on the table face down with any sand or grit, it can scratch. Usually I have a case with a bit of a lip to protect it.
Obviously it can crack if you drop it also.
Sent from my ALP-L29 using Tapatalk
Click to expand...
Click to collapse
Hi !
I agree with you. I've talked to the seller and the their Mate 10 Pro Amazing H+ should go on sale. I'm gonna get one.
My Mate 10 Pro hasn't arrived yet, I'm getting Moka brown color ^^ but for sure Nillkin is good
http://www.nillkin.com/english/proshow.asp?mid=2&sid=0&tid=0&cid=1&scid=&id=7328&page=1
Darktitor said:
Hi !
I agree with you. I've talked to the seller and the their Mate 10 Pro Amazing H+ should go on sale. I'm gonna get one.
My Mate 10 Pro hasn't arrived yet, I'm getting Moka brown color ^^ but for sure Nillkin is good
http://www.nillkin.com/english/proshow.asp?mid=2&sid=0&tid=0&cid=1&scid=&id=7328&page=1
Click to expand...
Click to collapse
Already got mine more than a week ago. Bought off aliexpress.
Unfortunately this time the glass is ever so slightly less than the full width of the phone - my P9 Plus Nillkin glass was edge to edge of the screen. About 0.5mm less than each side of the screen. I suspect this is because the no side bezels makes it hard to extend the glass all the way to the sides otherwise it might be non compatible with cases.
Not too irritating but definitely noticeable. Small halo effect as usual.
But overall the smoothness and the oleophobic coating definitely trumps the factory plastic protector. Still worth the buy.
Sent from my ALP-L29 using Tapatalk
jounin052 said:
Can you post some pictures of the screen protector installed? I'm looking to get a screen protector myself but they are a number of brands I dont know and no reviews for any of them yet.
Click to expand...
Click to collapse
Today i tried KONIX glass protector, (i guess this is just a generic glass, packed into some brand - just like many of screen protector in the market)
Just like any other 2.5D glass protector, it wont be able to cover the screen edge
But it still fit quite well, and the touch response is unaffected, or even better than on plastic (included) one
Glass cut is nicely rounded without sharp edge though, so i think this one is well manufactured
Here's some pics
otonieru said:
Today i tried KONIX glass protector, (i guess this is just a generic glass, packed into some brand - just like many of screen protector in the market)
Just like any other 2.5D glass protector, it wont be able to cover the screen edge
But it still fit quite well, and the touch response is unaffected, or even better than on plastic (included) one
Glass cut is nicely rounded without sharp edge though, so i think this one is well manufactured
Here's some pics
Click to expand...
Click to collapse
Thanks... Wanted to see the one that @Cccmachins has because I ended up ordering the same Ozero TP... Guess I'll have to wait till I get it to see and decide if that works or if I need to keep looking.
The ozero just has a black frame around it so it just hides the edges of the screen completely, so you are actually losing a tad bit of screen real estate. I also bought one on Amazon that does not have the frame like the ozero and the entire edge is lifted up all the way around my screen. I think I'd prefer the plastic ones and just replace them from time to time...
tuffluck said:
The ozero just has a black frame around it so it just hides the edges of the screen completely, so you are actually losing a tad bit of screen real estate. I also bought one on Amazon that does not have the frame like the ozero and the entire edge is lifted up all the way around my screen. I think I'd prefer the plastic ones and just replace them from time to time...
Click to expand...
Click to collapse
That sucks... The tempered glass screen protector manufacturers seem to have a hard time making them fit perfectly on these curve edge phones... It's either to small or not sticking on the edges...
Jevansent said:
Already got mine more than a week ago. Bought off aliexpress.
Unfortunately this time the glass is ever so slightly less than the full width of the phone - my P9 Plus Nillkin glass was edge to edge of the screen. About 0.5mm less than each side of the screen. I suspect this is because the no side bezels makes it hard to extend the glass all the way to the sides otherwise it might be non compatible with cases.
Not too irritating but definitely noticeable. Small halo effect as usual.
But overall the smoothness and the oleophobic coating definitely trumps the factory plastic protector. Still worth the buy.
Click to expand...
Click to collapse
Even the stock screen protector doesnt fully cover the edges. Is the nillkin tg the same or worse than the original SP in covering the side? Do you think the UAG plasma case is compatible with the nillkin tg?
i prefer this protector 9h tempered glass, it cover all the front, very clear also in sunlight, anti fingerprint. i buy it from local market, very satisfied
pictures
scrumptyous said:
What brand did you get and does it cover the whole screen?
Click to expand...
Click to collapse
Hello friend, as a seller, we have talked to countless manufacturers to find the perfect screen protectors for our clients. As now phones screen bigger and bigger, resolution values are higher also. It is so necessary to get a high quality screen protector to protect the high valued smart phones. And the meanwhile, the screen protector cannot affect the touch sensitivity of phone screen , cannot decrease the brightness of the phone screen. So really it is not an easy solution.
Anyhow, we used to struggle which one is better? Tempered glass or hydrogel screen protector? Tempered glass is more thickness to 0.33mm, while hydrogel usually under 0.2mm, tempered glass cannot be full screen protector, while hydrogel can be full screen protector. Which is such a pity tempered glass cannot be full screen. Still except this flaw, other aspects is much much better than hydrogel protector. So we stick to tempered glass screen protector for Huawei Mate 10.
Here is what we prepare for our clients.
Flos®Huawei Mate 10 Transparent Full Protection Tempered Glass Screen Protector HD Anti-Scratch-[2 Pcs]
And we offer express shipping to Europe/USA within 1 week at 2usd shipping fees.
Also we are on Amazon for Europe.
Flosmall.com said:
Hello friend, as a seller, we have talked to countless manufacturers to find the perfect screen protectors for our clients. As now phones screen..........
Click to expand...
Click to collapse
You know,
Sometimes its hard to trust a manufacturer, who despite promise the fine quality of their product, yet still manage to slip a typo on their commercial material,
Your images misspelled "tempered" as "temepred" and it doesn't sound convincing at all for me :silly:
So I picked up the amFilm glass screen protector the other day from Amazon. Out of all the glass protectors I could find on Amazon, this had the least amount of bad reviews. Also its sold by TechMatte which I had heard of before.
Anyways, it went on pretty easily. No loss of sensitivity as far as I can tell with using my Finger or the Spen after 24 hrs of use. 2 specs of dirt did manage to get under the glass, but I've almost gotten to the point I can ignore them, and I'm pretty sure if I try to remove it to get rid of them it will make it worse.
The dot matrix on the screen can be seen in some lighting conditions, but you need to look pretty close and not really a distraction.
It seems to fit fine with my Spigen Tough Armor case. My only beef so far is the edges are starting to collect lint/dust etcs. In about a month the surrounding edges of this protector may look really bad. But only time will tell.
https://www.amazon.com/Protector-Coverage-Installation-amFilm-Tempered/dp/B074G1W2RC
I bought the same protector and installed it and only left it on the table untouched for a few days and it lifted off the screen so TechMatte sent me a new one but haven't installed it yet. I'm trying to use it with a Ringke Fusion case.
So its been a little over a week since I put on the screen protector. My only big issue so far is when I hit the down arrow, it makes a noise like its lifting up the protector. Though looks at the protector it still seems glued down so not exactly sure what is going on. Maybe how its rubbing against the protector. TechMatte is sending me another free of charge to put on to see if that helps. As for the crud around the edges, I've just got used to it now. It isn't to bad.
I have used the am film screen protector on my S8 plus and Note 8. It works better than any other I have found. There are some cases that don't work well with it - it all depends on where the case fits on the phone in relation to the glass - if it touches the glass, it is going to lift up the corner or sides at some point. Ringke Fusion and a few others that I have tried work every well. Many of the screen protectors like am film added additional glue to the edges of the screen protector and the good ones included a guide that you use when installing the glass - if the screen protector is perfectly centered on the phone's screen, it works exceptionally well.
The glass clicking was what made me noticed the TGSP lifted as I can lightly touch and the entire glass would come off. I also have the Ringke Fusion. It was TechMatte who told me about the glue only being on the edges when I wrote them about it. I never even noticed there were less than full adhesive TGSP as I have used AmFilm on both the LG G4 and the iPhone 6S Plus without issues.
Almighty1 said:
The glass clicking was what made me noticed the TGSP lifted as I can lightly touch and the entire glass would come off. I also have the Ringke Fusion. It was TechMatte who told me about the glue only being on the edges when I wrote them about it. I never even noticed there were less than full adhesive TGSP as I have used AmFilm on both the LG G4 and the iPhone 6S Plus without issues.
Click to expand...
Click to collapse
Well, I thought I was going to love this screen protector. Unfortunately I ended up returning it. The edges keep lifting up, getting a ton of dust underneath the protector and I'm starting to loose sensitivity.
howie411 said:
Well, I thought I was going to love this screen protector. Unfortunately I ended up returning it. The edges keep lifting up, getting a ton of dust underneath the protector and I'm starting to loose sensitivity.
Click to expand...
Click to collapse
I actually used the original one that lifted with a Ringke Fusion case yesterday and while it worked fine without the case, it seems like the case is sticking in between the screen and the AmFilm which is what is causing the lift. I guess they could use better adhesive.
Huawei P30 pro has same screen size/dimensions as our device, and so i purchased this screen protector https://www.amazon.com/gp/product/B07N2MVBXF/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 works like a charm.
I followed your advice, picked up this screen protector and it works great and wraps around the curved part of the screen. No issues with it lifting yet, especially where I have a silicone case sitting on the corners of the phone where the screen protector sits. I would prefer a glass protector but I doubt if they will ever make a good one for this one. From past experience and online reviews, when looking at tempered glass protectors, those that have a black edge around the protector. That is where they apply the glue to stick to your phone. This creates a halo/bubble effect in the center of the screen where there is no adhesive. I tend to buy only the ones without the black edges. I'm waiting for Whitestone Dome to come out with one for this phone. I got one for my other half's S9+, works brilliantly and has full screen adhesive plus curves for the edge. Not sure if this one would work for our phone plus its out of stock lol
https://www.whitestonedome.com/products/huawei-p30-pro-tempered-glass-screen-protector
I went with glass for now, and it not covering the curves is honestly no big deal for me.
Skv012a said:
I went with glass for now, and it not covering the curves is honestly no big deal for me.
Click to expand...
Click to collapse
I use the fingerprint scanner a lot. Does the glass protector hinder it at all? The film type protector has no issues with it so far. Just not as smooth as glass of course
Sent from my ZTE A2020U Pro using XDA Labs
I'm about to buy what y'all suggested. Unfortunately, I bought the j&d screen protectors, and it doesn't even stick to the screen where it starts to curve. Has anyone found a better case for this phone? It just feels so fragile and I don't want to break it. Lol
Finally found a glass screen protector full adhesive for our device https://www.amazon.com/dp/B085C1WNPR/ref=cm_sw_r_other_apa_i_uj.3EbV1PRA50
The instructions have to be followed to the teeth or the install will be messed up.