Hi,
So I am back to compiling recoveries
Here goes TWRP 2.8.7 for Z2
(This might even work with Z3, but that's on your own risk. )
DOWNLOAD
http://ul.to/ch6yztfh
SOURCES/HOW TO BUILD
Built out of CM-13 trees with a couple of changes
swap /botable/recovery folder with http://github.com/omnirom/android_bootable_recovery (branch: android-6.0)
Few patches -
> https://github.com/TWRPXperia/andro...mmit/767c268ea53ccf30eb7835fb381b044224bc6e6d
> https://github.com/TWRPXperia/andro...mmit/14696c2fdc6757bb5057936e55354f18e4a88719
> https://github.com/TWRPXperia/andro...mmit/3059dff7a734401836db84e8c219f308aaba8e1b
We need cm13 before we need cm13 compatible recovery
New twrp theme looks cool, but i'm facing brightness issue, i hope it'll fixed ASAP ..
Sent from my Xperia Z2 using Tapatalk
Mikey94 said:
We need cm13 before we need cm13 compatible recovery
Click to expand...
Click to collapse
I can upload a build for you. Would you use without a camera ?
We are waiting for camera. Should be coming in 1-2 weeks
championswimmer said:
I can upload a build for you. Would you use without a camera ?[emoji14]
We are waiting for camera. Should be coming in 1-2 weeks
Click to expand...
Click to collapse
1-2 week [emoji33]
Upload your build please
championswimmer said:
I can upload a build for you. Would you use without a camera ?
We are waiting for camera. Should be coming in 1-2 weeks
Click to expand...
Click to collapse
Hey can your make a castor windy and castor ( z2 tablet lte and wifi) twrp build and post the commits for it here
Good to see back Champ!
Sent from my Xperia Z2 using Tapatalk
Can you upload this on mega or datafile host
CM13
I look forward to the CM 13 ROM, your work is always very good!
rcstar6696 said:
Hey can your make a castor windy and castor ( z2 tablet lte and wifi) twrp build and post the commits for it here
Click to expand...
Click to collapse
Sure will do that in the next week perhaps
Hi. Will this work for new bootloader for separate recovery partition?
timoti123 said:
Hi. Will this work for new bootloader for separate recovery partition?
Click to expand...
Click to collapse
Yes, it works
Sent from my D6503 using Tapatalk
flashable on previous twrp? doesn't it?
While you're at it, could you also include f2fs support? The official TWRP for Z2 Siruis somehow excluded it, even if the device works just fine with it.
3.0.0?
@championswimmer any plans for updating twrp?
Or better yet, what arguments did you use when compiling twrp to use the new recovery partition. I've only found instructions for use with the fotakernel. My googlefu is failing.
Sent from my D6503 using XDA-Developers mobile app
Related
Unofficial, no warranty, express or implied. Not final, nothing to do with the CM people, not backed by them, not made by them, may cause corruption of innocent kittens if used irresponsibly. I am posting this only because the main CM sources are not perfect right now for building for Qualcomm devices just yet, and need some tweaks in new branches.
CM 10.2 Android 4.3 built for, and working on C6603 International Xperia Z, once again thanks to Sony using such nice, open-source-friendly devices.
Working:
WiFi
Compass + sensors
Sound
Bluetooth
Front + Rear Camera
External SD
Not Working:
???
This is for the International C6603. Other devices at your risk. Build is for yuga, if that tells you whether it will work or not
http://goo.im/devs/pulser/XperiaZ/CM10.2/cm-10.2-20130807-UNOFFICIAL-yuga.zip
Awesome
Btw, can you provide me the device + vendor tree u used? Thanks sir
OT: (Sorry for that)
Is it compulsory to be a RC/RD to get a XDA Build Server? Sorry for OT Again
nolinuxnoparty said:
Awesome
Btw, can you provide me the device + vendor tree u used? Thanks sir
OT: (Sorry for that)
Is it compulsory to be a RC/RD to get a XDA Build Server? Sorry for OT Again
Click to expand...
Click to collapse
Yes, that is for RD/ERD/RC
I just used regular device and vendor tree for yuga, but used the "next" and "next-wip" branches of
frameworks/av
frameworks/native
hardware/qcom/media-caf
hardware/qcom/display-caf
hardware/libhardware
hardware/libhardware_legacy
Are you sure this is for the Yuga? Link name is Pollux_Windy. Thats the Tablet Z. Im gonna download it and check build.prop (maybe the filename is incorrect)
Taylor_Swift said:
Are you sure this is for the Yuga? Link name is Pollux_Windy. Thats the Tablet Z. Im gonna download it and check build.prop (maybe the filename is incorrect)
Click to expand...
Click to collapse
I guess you need to use the text in the link. It's linked wrong I believe.
I haven't seen any 4.3 gapps. Will try the 4.2.2 I have and report back
Sent from my Nexus 7 using Tapatalk HD
---------- Post added at 04:35 PM ---------- Previous post was at 04:20 PM ----------
pulser_g2 said:
Unofficial, no warranty, express or implied. Not final, nothing to do with the CM people, not backed by them, not made by them, may cause corruption of innocent kittens if used irresponsibly. I am posting this only because the main CM sources are not perfect right now for building for Qualcomm devices just yet, and need some tweaks in new branches.
CM 10.2 Android 4.3 built for, and working on C6603 International Xperia Z, once again thanks to Sony using such nice, open-source-friendly devices.
Working:
WiFi
Compass + sensors
Sound
Bluetooth
Front + Rear Camera
External SD
Not Working:
???
This is for the International C6603. Other devices at your risk. Build is for yuga, if that tells you whether it will work or not
http://goo.im/devs/pulser/XperiaZ/CM10.2/cm-10.2-20130729-UNOFFICIAL-yuga.zip
Click to expand...
Click to collapse
Quoted with correct link
Sent from my Nexus 7 using Tapatalk HD
pulser_g2 said:
Yes, that is for RD/ERD/RC
I just used regular device and vendor tree for yuga, but used the "next" and "next-wip" branches of
frameworks/av
frameworks/native
hardware/qcom/media-caf
hardware/qcom/display-caf
hardware/libhardware
hardware/libhardware_legacy
Click to expand...
Click to collapse
I built using the original sources. Seems like it's building correctly now. It boots
alnikki25k said:
I built using the original sources. Seems like it's building correctly now. It boots
Click to expand...
Click to collapse
can you upload build please?
eranda84 said:
can you upload build please?
Click to expand...
Click to collapse
Sure. Just let me finish up a few things.
You can flash this Gapps guys CLICK thx to banks
Anyone having issues with SMS with 10.2? I installed it on my ZL and me and another user are unable to send SMS. Want to figure out if it's ZL related or the Z is also affected.
Thanks!
havanahjoe said:
Anyone having issues with SMS with 10.2? I installed it on my ZL and me and another user are unable to send SMS. Want to figure out if it's ZL related or the Z is also affected.
Thanks!
Click to expand...
Click to collapse
There was this issue with HTC one as well not sure if codeworx fixed it
Sent from my C6603 using xda app-developers app
havanahjoe said:
Anyone having issues with SMS with 10.2? I installed it on my ZL and me and another user are unable to send SMS. Want to figure out if it's ZL related or the Z is also affected.
Thanks!
Click to expand...
Click to collapse
Nope. Nothing here. I could send messages. Put up the logcat when you send a message.
I can't get root to work, is it normal or should I flash again?
saibz said:
I can't get root to work, is it normal or should I flash again?
Click to expand...
Click to collapse
try flashing Chainfire's latest flashable SuperSU and let say if it's work.
gandou63 said:
try flashing Chainfire's latest flashable SuperSU and let say if it's work.
Click to expand...
Click to collapse
Thanks, although it's working now. I'm not exactly sure how, but I think messing around in "Developer options" somehow fixed it.
Nice work :thumbup:
Sent from my C6603 using xda app-developers app
Not sure if this is just a one-time release ROM but I've been using it for roughly a week and have no major issues, except for the occasional freeze. Oh sometimes the browser flickers too while typing characters in the "omnibar".
saibz said:
Thanks, although it's working now. I'm not exactly sure how, but I think messing around in "Developer options" somehow fixed it.
Click to expand...
Click to collapse
Yes. You need to first change the Root Access option under Developer options to Apps and ADB. Seems to reset Superuser permissions.
New build posted.
DISCONTINUED: I discontinue this in favor of my OMNI-Build. CM is too broken at the moment for me (Graphic glitches as well as regular freezes). Also the FXP builds seem start to roll in. OMNI works fine for me and I will put out a new build tomorrow.
Threw a working CyanogenMod 11 build together. As the bundled CWM does not work, I replaced it with TWRP.
TRY AT YOUR OWN RISK!
EDIT: BE WARE, it seems that the GPU driver screws up and the tablet starts to hang under certain circumstances. I am working on it.
EDIT2: Seems it has nothing to do with the GPU drivers. ReInstalled and wiped and it worked fine the last few hours. Maybe its the GApps. Investigation still ongoing.
Working:
- HSDPA+ (I have no LTE capable card, so I cannot test LTE, but HSDPA+ works)
- Bluetooth
- WiFi
- GPS
- Camera
- Video
- Sound
- Hardware Acceleration
- Rotation
Not working:
- CWM (flashes broken) - replaced it with TWRP
- SELinux is set to permissive for now (otherwise data and cache do not mount)
- Nothing else found .. yet
Link:
cm-11-20131115-UNOFFICIAL-pollux
GApps
lowtraxx said:
Threw a working CyanogenMod 11 build together. As the bundled CWM does not work, I replaced it with TWRP.
TRY AT YOUR OWN RISK!
Working:
- HSDPA+ (I have no LTE capable card, so I cannot test LTE, but HSDPA+ works)
- Bluetooth
- WiFi
- GPS
- Camera
- Video
- Sound
- Hardware Acceleration
- Rotation
Not working:
- CWM (flashes broken) - replaced it with TWRP
- SELinux is set to permissive for now (otherwise data and cache do not mount)
- Nothing else found .. yet
Link:
cm-11-20131115-UNOFFICIAL-pollux
GApps
Click to expand...
Click to collapse
Is the UI switchable to Tablet UI?
Hi there,
update from my CM10.2 worked flawlessly.
@lowtraxx
would u mind to share your manifest file, so i can learn compiling my "own" cm and later at meow kernel?
THX
Chaos
It'd be great to have some love for the WiFi variants in these forums. Unfortunately I don't have a computer anymore otherwise I would add the device tree and build it myself.
LTE seems to be working
WythDryden said:
It'd be great to have some love for the WiFi variants in these forums. Unfortunately I don't have a computer anymore otherwise I would add the device tree and build it myself.
Click to expand...
Click to collapse
+1 for a sgp31x version
Inviato dal mio SGP311 con Tapatalk 4
hado a full wiperdwarechaos said:
Hi there,
update from my CM10.2 worked flawlessly.
@lowtraxx
would u mind to share your manifest file, so i can learn compiling my "own" cm and later at meow kernel?
THX
Chaos
Click to expand...
Click to collapse
Did you do a full wipe before update?
Hi
fokus said:
Did you do a full wipe before update?
Click to expand...
Click to collapse
nope. Always trying without wiping first. So far i cannot see any problems.
THX
Chaos
hardwarechaos said:
Hi
nope. Always trying without wiping first. So far i cannot see any problems.
THX
Chaos
Click to expand...
Click to collapse
Your risk - my fun! THX
BTW: Is it possible to OC the CPU?
Hi,
fokus said:
Your risk - my fun! THX
BTW: Is it possible to OC the CPU?
Click to expand...
Click to collapse
do not blame if this does nit work
Max CPU frequency in the settings is 1512MHZ. So i guess no OC.
THX
Chaos
Most tablet z users own the wifi version. I hope someone makes a Rom for the masses soon.
i got status 7 error while flashing rom using cwm 6.0.3.2
I have one with locked bootloader, just rooted, with not Cwm or twrp.
Will I be able to install this ROM if I installed twrp recovery? Or do I also need to unlock bootloader before flashing?
If yes what are the fastest way to do this.
What stock now
Sent from my HTC One using xda app-developers app
https://sites.google.com/site/projectfreexperia/download/cyanogen-mod-11
I looked @ the downloadpage, and there is a CM11 pollux_windy file included.
Anyone tested it? :cyclops:
I have installed CM11 on my old Galaxy S, and it runs so smooth, like never before.
zeus2602 said:
https://sites.google.com/site/projectfreexperia/download/cyanogen-mod-11
I looked @ the downloadpage, and there is a CM11 pollux_windy file included.
Anyone tested it? :cyclops:
I have installed CM11 on my old Galaxy S, and it runs so smooth, like never before.
Click to expand...
Click to collapse
Nice find man, im gonna give this a try as soon as it downloads been running cm 10.2 since i got my xtz so been looking forward to this!
Edit: so i flashed over my cm10.2 with cm11 and 4.4 gapps at first and then tried a clean flash of the boot img and installing from recovery. so far its not very stable at the moment for me on my pollux_windy, there is no sound but i keep hearing a clicking sound from the tablet, dalvik / art seems to be working but i was having the laggy issues opening the app drawer and unlocking the screen, it looks really nice so far and im enjoying the google launcher experience but i keep getting random hangs and then reboots at the moment. Just done a clean flash and giving art another try.
Edit 2: No such luck still kinda laggy and no sound but with the click noise repeating every few seconds, just flashed back to cm10.2 coz i need sound :s keep up the good work though guys, really looking forward to this rom!
sorry op not trying hijack thread..
here is 11.23 build i made for pollux_windy..but it is a boot image and system image..have to fastboot it.
cm11-pollux_windy-11.23: http://mfi.re/?b4v8r8g
So finally sound works ok?
pangiotis24 said:
So finally sound works ok?
Click to expand...
Click to collapse
yes
Sent from my XT1060 using xda app-developers app
skiwong20 said:
sorry op not trying hijack thread..
here is 11.23 build i made for pollux_windy..but it is a boot image and system image..have to fastboot it.
cm11-pollux_windy-11.23: http://mfi.re/?b4v8r8g
Click to expand...
Click to collapse
Your link doesn't work for me it just takes me to an account upgrade page for mediafire
Sent from my SGP311 using XDA Premium HD app
andymg350 said:
Your link doesn't work for me it just takes me to an account upgrade page for mediafire
Sent from my SGP311 using XDA Premium HD app
Click to expand...
Click to collapse
+1
This is pretty much dead.
That and the server it ran on is dead aswell, and i forgot to backup the scripts i was using to keep it all in check, oops.
So long for now!
For Xperia Z only!
ALWAYS MAKE A BACKUP of your files before you install something.
I am not responsible if you brick your device, but if the worst happens, i will try and help.
Click to expand...
Click to collapse
The ROM is built everyday around 18:00 GMT+1.
It's bog standard CM11, so changelogs for that can be found here:
http://review.cyanogenmod.org/#/q/status:merged+branch:cm-11.0,n,z
http://www.cmxlog.com/11/
The only thing different, is that this build is with MEOW kernel, which hopefully is alright with @jeroenqui
MEOW-Kernel thread is available here: http://forum.xda-developers.com/showthread.php?t=2448130
For donations, please refer to the CM11 guys, FXP, jeroenqui and whomever else is making it possible for me to build this rom for you guys.
Builds are available here: http://cm11.karbowiak.dk/
For Google Apps, please refer to the PA Google Apps packages, which are available here: http://forum.xda-developers.com/showthread.php?t=2397942
Enjoy!
Reserved for me
Best KK rom for our device so far
I'm still on 11/23 build, but it's stable and have a great battery performance
I can only imagine that with MEOW Kernel will be even better
Hi LaMaaH , can you build a removed DoubleTap2Wake and Sweep2Wake version of MEOW Kernel , I always have touch-going-crazy problem with those 2 features.
Can use Android 4.3 CWM to upgrade?
or need to use flash 4.4 img first?
kendalfung said:
Can use Android 4.3 CWM to upgrade?
or need to use flash 4.4 img first?
Click to expand...
Click to collapse
You can try 1st, if error you can use meow kernel for flashing..flash meow kernel reboot recovery and flash rom, or extract boot.img from rom and flash using fastboot, reboot recovery and flash rom.
Sent from my C6603 using Tapatalk
heorung said:
Hi LaMaaH , can you build a removed DoubleTap2Wake and Sweep2Wake version of MEOW Kernel , I always have touch-going-crazy problem with those 2 features.
Click to expand...
Click to collapse
turn off these features in e.g. Trickster mod app
Turn it off doesn't fix the issue, i still have touch issue with those features turn off.
heorung said:
Turn it off doesn't fix the issue, i still have touch issue with those features turn off.
Click to expand...
Click to collapse
I think the Kernel is still in the early builds, just wait till the dev updates it and you'll see more features and stability.
Cause I switched into this rom and I find that the recovery which comes with this rom the newest version I assume and it's a bit slow compare to the the last version., So I assume that the it will be fine once the kernel gets updated well
So how does this fare compared to the other 4.4 roms out there?
Does it have the huge lockscreen delay and random lags like the rest?
Is superuser working in ART?
LaMaaH said:
The only thing different, is this si build with MEOW kernel, which hopefully is alright with @jeroenqui
MEOW-Kernel thread is available here: http://forum.xda-developers.com/showthread.php?t=2448130
For donations, please refer to the CM11 guys, FXP, jeroenqui and whomever else is making it possible for me to build this rom for you guys.
Click to expand...
Click to collapse
Hey man, it's alright.. Although technically flashing my package should also work with default CM builds...
Will test this and fix it when needed.. I hear some people have problems flashing it over another ROM.
not tried this build, but have a go at disabling hw overlays to see if it helps with the erratic touchscreen behaviour.
jeroenqui said:
Hey man, it's alright.. Although technically flashing my package should also work with default CM builds...
Will test this and fix it when needed.. I hear some people have problems flashing it over another ROM.
Click to expand...
Click to collapse
Yeah i know, but i got bored and decided to build my own CM11 with it already in, and then i figured i might aswell share it while at it
dekadence_ said:
So how does this fare compared to the other 4.4 roms out there?
Does it have the huge lockscreen delay and random lags like the rest?
Click to expand...
Click to collapse
No lockscreen delay on my own install, and no errors either, just works
heorung said:
Hi LaMaaH , can you build a removed DoubleTap2Wake and Sweep2Wake version of MEOW Kernel , I always have touch-going-crazy problem with those 2 features.
Click to expand...
Click to collapse
Nope, you can use Trickster Mod to disable them, but i don't have any touch issues with my own Yuga.
koukos said:
Is superuser working in ART?
Click to expand...
Click to collapse
I actually havn't tested it, so i don't know.
But afaik CM did import some ART fixes for SuperUser not long ago, so, maybe ? :silly:
koukos said:
Is superuser working in ART?
Click to expand...
Click to collapse
Of course it's work..
Sent from my C6603 using Tapatalk
Hi @LaMaaH, I just saw a post on Nexus 5 forum on how to enable WhatsApp in ART runtime, can you help to compile this libart.so fix for our device? If it's alright with you.
This is the link to the post http://forum.xda-developers.com/showthread.php?t=2527879
Sent from my C6603 using XDA Premium 4 mobile app
Any non-kernel changes from 24th build?
Sent from my C6603 using xda app-developers app
petrifyre said:
Hi @LaMaaH, I just saw a post on Nexus 5 forum on how to enable WhatsApp in ART runtime, can you help to compile this libart.so fix for our device? If it's alright with you.
This is the link to the post http://forum.xda-developers.com/showthread.php?t=2527879
Sent from my C6603 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes this would be awesome!
I've already tried this one http://forum.xda-developers.com/showpost.php?p=47604251&postcount=77 but it results in mass FCs
dasprot said:
Yes this would be awesome!
I've already tried this one http://forum.xda-developers.com/showpost.php?p=47604251&postcount=77 but it results in mass FCs
Click to expand...
Click to collapse
I've also tried the zip file attached in that forum and yeah, infinite fc. So I thought maybe the zip just for nexus.
Sent from my C6603 using XDA Premium 4 mobile app
LaMaaH said:
No lockscreen delay on my own install, and no errors either, just works
Click to expand...
Click to collapse
Cool! Guess I'll give it a shot then!
Its unofficial,
If you want the link DM me.
Edit: Here is the link: https://www.androidfilehost.com/?fid=24052804347849450
If anyone wants me to take it down lmk. This is not my build, it was uploaded and most likely compiled by "DeVortex"
You also may want to check out this app:
https://www.reddit.com/r/Android/comments/3qp5q9/custom_quick_settings_app_allowing_for_broadcast/
It allows you to edit the quick settings tiles to anything you like. I tested it with this build of cm13 and it works great.
cm-13-20151029-UNOFFICIAL-klte.zip Download Link:
https://www.androidfilehost.com/?fid=24052804347849406
Thanks to DeVorteX
It's everything working? Or it's full of bugs for now ?
Will this work on klte (G900F) or the only kltespr ??
egonet said:
Will this work on klte (G900F) or the only kltespr ??
Click to expand...
Click to collapse
The link for the klte build is in the second post.
igorescu04 said:
It's everything working? Or it's full of bugs for now ?
Click to expand...
Click to collapse
klte version is super buggy. launcher is a no go, sim works, wifi works, didn't check much more. when a working version is compiled you will see someone posting it in the unified thread.
---------- Post added at 01:58 PM ---------- Previous post was at 01:41 PM ----------
igorescu04 said:
It's everything working? Or it's full of bugs for now ?
Click to expand...
Click to collapse
klte version is super buggy. launcher is a no go, sim works, wifi works, didn't check much more. when a working version is compiled you will see someone posting it in the unified thread.
Why I didn't find the fingerprint option? The cyanogenmod website says that we should have that option
Tommidi said:
Why I didn't find the fingerprint option? The cyanogenmod website says that we should have that option
Click to expand...
Click to collapse
Very alpha build? Maybe isnt official build yet, we need wait
Enviado de meu SM-G900F usando Tapatalk
I am syncing now Cm13 repo for klte. Will start building in a few,what do you think if I open up a thread in Android Development for cm13 on klte?
mauriicio21 said:
Very alpha build? Maybe isnt official build yet, we need wait
Enviado de meu SM-G900F usando Tapatalk
Click to expand...
Click to collapse
I'll try apps like fingersecurity to see if the code for the fingerprint is already integrated in the cm13 code (And only hidden in settings) or totally missing
Wolf80 said:
I am syncing now Cm13 repo for klte. Will start building in a few,what do you think if I open up a thread in Android Development for cm13 on klte?
Click to expand...
Click to collapse
Klte repo already working? If yes, yeah, open a thread
Enviado de meu SM-G900F usando Tapatalk
How stable is it?
And can I flash it over CM 12.1 on G900F without a factory reset?
broken3D said:
And can I flash it over CM 12.1 on G900F without a factory reset?
Click to expand...
Click to collapse
dont dirty flash on a new version of android. btw its very buggy, on my usc s5 i have service and i have wifi though so im very happy with how its all coming along. and i havent even flashed the latest build
How long do I need to wait for it to load? I've waited over ten minutes. I flashed the rom and the gapps, but it's stuck on the boot animation. Do I need a certain kernel?
Sent from my g900t.
daddymemoru said:
How long do I need to wait for it to load? I've waited over ten minutes. I flashed the rom and the gapps, but it's stuck on the boot animation. Do I need a certain kernel?
Sent from my g900t.
Click to expand...
Click to collapse
Did you do the factory reset first?
Tommidi said:
Did you do the factory reset first?
Click to expand...
Click to collapse
Yeah I did regular wipe and tried the advanced wipe with system, data, cache and dalvik. Makes me sad I can't seem to get this awesome rom to work.
Don't feel sad its buggy AF its unusable
Their really should make a thread for this I tried this on my unlock Sprint s5 and its not as buggy as people say Im using build 10302015 klte version and it pretty smooth now on tap doesn't work but everything else so far does. For those having trouble installing or it getting stuck booting just power off reboot recovery and factory reset again and it should work
orenzah said:
cm-13-20151029-UNOFFICIAL-klte.zip Download Link:
https://www.androidfilehost.com/?fid=24052804347849406
Thanks to DeVorteX
Click to expand...
Click to collapse
He has an updated one here for Oct 31 at the bottom
http://23.94.12.54/klte/rel/
Sent from my SM-G900W8 using Tapatalk
http://forum.xda-developers.com/gal...ent/rom-cyanogenmod-13-0-android-6-0-t3237502
I ported cm12 for our SGM2 but i dont know that it works. test it by yourself and tell me if it works!
Link: http://www.mediafire.com/download/t3355rh7j0jca2q/cm-12.1-20160425-UNOFFICIAL-jena.zip
Gapps: opengapps.org ( pick arm>> android 5.1 >> pico )(51MB I think )
(because the system partition has only 497.19MB i think)
Install method:
download the rom and the gapps.
download and install the v3 stable cwm recovery( credits @simokb1996) Link: http://forum.xda-developers.com/galaxy-mini/mini-2-dev/cwm-6-0-5-1-galaxy-mini-2-s6500-t3201861
put the files into internal or external storage and boot into recovery.
do a nandroid backup!!
wipe data/factory reset
install rom
install gapps
reboot and see if it works
when it isnt working then just write to me: [email protected]
thanks,
Good Luck and looking forward
Nexus 4 ❤
#Malpa73 said:
Good Luck and looking forward
Nexus 4
Click to expand...
Click to collapse
thanks,i made the rom but i can t test it because i am really busy today iwill test it and upload it tomorrow
xEmre66 said:
thanks, i made the rom i'm now testing it it is on cm12 bootanimation i will upload it tomorrow !
Click to expand...
Click to collapse
Ok, I was there the will to refine CM10.1 Improved, mainly kernel And if all goes well this week to hit the XDA
How will the already launched it willingly after testing This is version 5.0 or 5.1.1?
Nexus 4 ❤
#Malpa73 said:
Ok, I was there the will to refine CM10.1 Improved, mainly kernel And if all goes well this week to hit the XDA
How will the already launched it willingly after testing This is version 5.0 or 5.1.1?
Nexus 4
Click to expand...
Click to collapse
It's Android 5.1.1. Yesterday I tried to Boot it Booted up. I tested it and it works but the camera doesn't work.
It's uploading now!!!!!!!! I cant test it because my mini 2 charging port not working......
Test it by yourself and say me thats working or not please. When not working I'm gonna fix it.
xEmre66 said:
It's uploading now!!!!!!!! I cant test it because my mini 2 charging port not working......
Test it by yourself and say me thats working or not please. When not working I'm gonna fix it.
Click to expand...
Click to collapse
I will write the link now when its uploaded on mediafire.
xEmre66 said:
I will write the link now when its uploaded on mediafire.
Click to expand...
Click to collapse
I uploaded it. you can download it
xEmre66 said:
I ported cm12 for our SGM2 but i dont know that it works. test it by yourself and tell me if it works!
Link: http://www.mediafire.com/download/t3355rh7j0jca2q/cm-12.1-20160425-UNOFFICIAL-jena.zip
Gapps: opengapps.org ( pick arm>> android 5.1 >> pico )(51MB I think )
(because the system partition has only 497.19MB i think)
Install method:
download the rom and the gapps.
download and install the v3 stable cwm recovery( credits @simokb1996) Link: http://forum.xda-developers.com/galaxy-mini/mini-2-dev/cwm-6-0-5-1-galaxy-mini-2-s6500-t3201861
put the files into internal or external storage and boot into recovery.
do a nandroid backup!!
wipe data/factory reset
install rom
install gapps
reboot and see if it works
when it isnt working then just write to me: [email protected]
thanks,
Click to expand...
Click to collapse
well this is'nt the right place to upload your thread
you can upload it to the developement thread to fix bugs and errors
simokb1996 said:
well this is'nt the right place to upload your thread
you can upload it to the developement thread to fix bugs and errors
Click to expand...
Click to collapse
+but i cant write there i need higher post count it says when i try that
xEmre66 said:
+but i cant write there i need higher post count it says when i try that
Click to expand...
Click to collapse
ah ok i interstand now
you build contains a lot of errors you just ported from pico
it does'nt build from source and it gave problems in recovery
because the recovery can handle just cm11 but the updater-script in cm12.1 need a cm12.1 recovery
recovery
How can I build a CM12.1 recovery? @simokb1996
recovery
How can I build a CM12.1 recovery? @simokb1996
xEmre66 said:
How can I build a CM12.1 recovery? @simokb1996
Click to expand...
Click to collapse
you build cm12.1 from source or you just port it ????
you have to build recovery from source
you need lunix like ubuntu or fedora to build android
simokb1996 said:
you build cm12.1 from source or you just port it ????
you have to build recovery from source
you need lunix like ubuntu or fedora to build android
Click to expand...
Click to collapse
My mini 2 is here from the repairing station and now i tested it it is booting now its on the bootanimation...
Hello, i have a problem with Cyanogenmod 12.1 When I want Install this ROM, It shows an error executing updater binary in TWRP 2.8.5.0. What should I do?
PS: Sorry for my bad English
wiki3007 said:
Hello, i have a problem with Cyanogenmod 12.1 When I want Install this ROM, It shows an error executing updater binary in TWRP 2.8.5.0. What should I do?
PS: Sorry for my bad English
Click to expand...
Click to collapse
@wiki3007 Yes, I know it. I will fix this soon and update the links. It gives always an error. What exactly is the error? Is it saying "error executing updater binary"???
Yes, that's error
Sent from my GT-S6500D using XDA Free mobile app
I think i fixed the rom. i cant test it because my mini 2 fall into water and now it is in rice for 2 days i test it after 1 week.........
Maybe you can test it and tell me... when my phone works i will build a fully working cm12.1..................................................................
i will upload it now
Fake cm12, this cm11 rom
Sent from my B1-730HD using XDA Free mobile app