HTML:
/* *** Disclaimer
* Your Warranty is now Void!
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Hi, I'm starting to compile, I've done some roms and this is my first kernel, I is compiled from the source code CM13 with all the latest changes, I have added some tweacks to improve battery consumption, little by little improving ,Cheers.
Features;
- Compiled from the source code CM13 03/04[/2016
- Compiled with GCC toolchain Linaro 4.9.4 with various build optimizations (GCC Tweaks for Cortex a15)
- Regulator: set retention and ldo voltages to the minimum
- ARMv7 tweaks
- Add notifier framework for showing memory
- Lowered Retention Voltage to "600000"
- Bumped Memory Bandwidth on OC Freqs to 1006 MHz (from 931 MHz normally)
- Lowered Memory Bandwidth for 268 MHz to 50 MHz (from 75 MHz normally)
- Savoca's Advanced Color Control v2
- Adjusted Frequency Table to ramp up smoothly for both Clock Frequency and Memory Bandwidth
- Many other small tweaks*
- Cpufreq: nightmare: added new governor
- Cpufreq: INTELLIACTIVE: added new governor
- Cpufreq: intellimm: added new governor
- Cpufreq: slim: added new governor
- Cpufreq: smartmax : added new governor
- Many other small tweaks*
SnaPKernel-v2.1-CM13-Victara- DOWNLOAD
-(Compatible CM13 03/04[/2016)-
SnaPKerneL-v2.1-RR-Version-CM13 DOWNLOAD
-(Compatible RR 5.6.6)-
Instructions:
* Boot into Recovery
* (Recommended) Make a complete backup of entire rom
* Flash Zip
* Reboot
Thanks to these people of whom I caught his fantastic work
The Marionette,Render kernel,franciscofranco,Neobuddy89,ak,anarkia1976,Savoca,Faux123 and More
Special Thanks to my Testers
@LarissaLomeli @Snap639 @Kurianno @Janni_Z @HexaOctagono @JimYoung @edhlmetal00
XDA:DevDB Information
SnaPKerneL, Kernel for the Moto X 2014
Contributors
Mennpiko
Source Code: https://github.com/Menpiko/SnaPKernel-Victara-CM13.git
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 29/02/2016
Created 2016-03-01
Last Updated 2016-04-03
post in construction
good work dude , keep with that !
Gran trabajo Mennpiko, muchas gracias por el agradecimiento.
Ya nos hacia falta un kernel bueno y el tuyo lo logro.???
Enviado desde mi XT1095 mediante Tapatalk
Edhlmetal00 said:
Gran trabajo Mennpiko, muchas gracias por el agradecimiento.
Ya nos hacia falta un kernel bueno y el tuyo lo logro.
Enviado desde mi XT1095 mediante Tapatalk
Click to expand...
Click to collapse
Only english man, please.
Dude, great kernel! At the moment it is seen in the flow, we will see in battery.
The best Kernel for CM and tested on my Moto X 2014 is smooooooooooth, fluid and fast. Great job and I hope we continue to improve this Kernel (hopefully fauxsound)
Felicidades Samu.
JanniZ
Enviado desde mi XT1563 mediante Tapatalk
Thank you, installed.
Unfortunately cannot provide much feedback. I stray away from the default interactive governor settings. It is stable, nice additional options for screen calibration , and running smoothly.
Plans for additional features like CPU Governors, CPU Hotplugs, I/O schedulers, and TCP Congestion Algorithms?
Visi0nofExcellence2 said:
Thank you, installed.
Unfortunately cannot provide much feedback. I stray away from the default interactive governor settings. It is stable, nice additional options for screen calibration , and running smoothly.
Plans for additional features like CPU Governors, CPU Hotplugs, I/O schedulers, and TCP Congestion Algorithms?
Click to expand...
Click to collapse
I have working on it, it's features are in my plans
Enviado desde mi XT1092 mediante Tapatalk
cyanpop
Hey , this kernel works in rom cyanpop based on cm 13 ?
Hey sr. Mennpiko this kernel work in RR 5.6.4? Ty.
KernelGM said:
Hey sr. Mennpiko this kernel work in RR 5.6.4? Ty.
Click to expand...
Click to collapse
Hi,no work in RR,sorry
only things I ask for in features is CRC disable and voltage control
work in CYANPOP
this kernel work in cyanpop!
Mennpiko said:
Hi,no work in RR,sorry
Click to expand...
Click to collapse
What makes a kernel not work with RR?
bornlivedie said:
What makes a kernel not work with RR?
Click to expand...
Click to collapse
That would be interessting to know ...
SaberJ2X said:
only things I ask for in features is CRC disable and voltage control
Click to expand...
Click to collapse
If this in my plans, I'm working on it
der_Kief said:
That would be interessting to know ...
Click to expand...
Click to collapse
I'm compiling a compatible version with RR, will be ready soon
Mennpiko said:
...I'm compiling a compatible version with RR, will be ready soon
Click to expand...
Click to collapse
may you explain the differences ?
der_Kief said:
may you explain the differences ?
Click to expand...
Click to collapse
The truth is I do not know, I am a rookie and I'm learning, only if you compile the kernel from source code RR if it works for me is double work, but not have anyone to ask, very few people answer the Doubts
thanks for your honesty and your hard work :good:
Would love if this kernel worked with BrokenOS too.
Related
This is a port of Optimus Kernel by Flashhhh for Peregrine
Must sure to thank him - Here
Not compatible with Dirty Unicorns atm as it's using the older cm-12.0 kernel source meaning wifi will not work if this is flashed.
I present to you my own kernel which has been built with many optimizations and tweaks. This kernel will work on lollipop roms(Not for stock roms) only.The main aim is to provide a stable kernel with optimizations.
I hope you all will like it
Enjoy!
Note: R12 or later will work perfectly only on LP bootloader. You need to be on a rom which has implemented new kernel sources. Read post #3 about bricked hotplug.
Custom Features:
- Compiled With Archdroid's 5.2 Toolchain
- Updated to latest CM131 Sources
- Compiled With -O3 & Graphite Flags
- Additional many optimization flags
- Compiled With Cortex A7 Tweaks
- ARM v7 Optimizations
- Mpdecision hotplug driver(Using custom powerhal by CM)
- DoubleTap2Wake/Sweep2Wake
- GPU underclock/overclock(Min:100 MHz & Max:533 MHz)
- Add dev/frandom
- Added Support for Kernel Neon Mode
- Enabled Pipe Flag
- Adreno Idler Algorithm
- PowerSuspend Driver v1.5
- Add BioShock/DanceDance Govs
- Added SmartMax/LionHeart Govs
- LCD Kcal Control by Savoca
- Faux's Sound Control
- Optimized ARM RWSEM Algorithm
- Optimized Square Root Algorithm
- LMK tweaks
- block: disable add_random
- Enable unaligned capability for ARM
- CpuFreq and CpuBoost Optimizations
- Disabled Gentle Fair Sleepers
- Enabled Many TCP Congestions
- Added SIO,VR & ZEN IO Scheduler
- Sched & Mutex Tweaks
- Pushed Read Ahead value to 512
- Use your android device as USB Keyboard/Mouse
- Enabled FSync by default
- Optimized Slub
- VFP HardFloat
- Power Efficient WorkQueues
- Kexec patched (Multirom Compatible)
- Many more things (Check Github)
Disclaimer:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this KERNEL
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
Pls Read This before flashing:
You need ROM's default kernel before flashing this as this kernel makes use of AnyKernel 2 by @osm0sis. Make sure you have it otherwise clean flash the kernel with the rom to avoid any issues.(At least dirty flash rom+kernel) Credits to @attack11 for some part of install script.Read FAQ's and changelogs in 2nd post. THIS KERNEL COMES FINE TUNED OUT OF THE BOX.
DOWNLOADS:
AndroidFileHost
How to Flash:
1. Download the kernel and place it into your phone storage
2. Reboot into recovery
3. Reinstall(Dirty flash) Rom + the kernel
4. Reboot and enjoy!
PLS DON'T MIRROR THE LINKS
Recommended app:
Synapse or Kernel Adiutor
Flash UKM.zip from the below link: (credits to @apb_axel)
http://forum.xda-developers.com/android/software/zip-synapse-script-universal-kernel-t2736986
And then install synapse from play store.
I would like to say special thanks to @Flashhhh for allowing me to port his kernel and stealing his OP
@faux123 @YoshiShaPow @fermasia @Alberto97 @TeamMex @Quasar @Mazda @FabioSan @Blechdose @neobuddy89 @RenderBroken @savoca @deadman96385 @pinkflozd @alin.p @Cl3Kener @Shivam Kuchhal and CYANOGENMOD TEAM
and MANY MORE...
XDA:DevDB Information
Optimus Kernel, Kernel for the Moto G
Contributors
Kayant, Flashhhh
Source Code: https://github.com/Kayant/android_kernel_motorola_msm8226
Kernel Special Features:
Version Information
Status: Stable
Created 2015-05-10
Last Updated 2016-01-17
Reserved
Looking for changelogs??
Marshmallow Releases -
R46 - http://forum.xda-developers.com/showpost.php?p=63788257&postcount=2395
R47 - http://forum.xda-developers.com/showpost.php?p=63923077&postcount=2399
R48 - http://forum.xda-developers.com/showpost.php?p=63952176&postcount=2417
R49 - http://forum.xda-developers.com/showpost.php?p=64110186&postcount=2431
R50 - http://forum.xda-developers.com/showpost.php?p=64389138&postcount=2449
R51 - http://forum.xda-developers.com/showpost.php?p=64468320&postcount=2461
R52 - http://forum.xda-developers.com/showpost.php?p=64511085&postcount=2462
R53 - http://forum.xda-developers.com/showpost.php?p=64652842&postcount=2479
R54 - http://forum.xda-developers.com/showpost.php?p=64767486&postcount=2492
R55 - http://forum.xda-developers.com/showpost.php?p=64818240&postcount=2509
------------------------------------------------------------------------------------------------------------------
Lollipop releases
R32 - http://forum.xda-developers.com/showpost.php?p=60951752&postcount=1661
R33 - http://forum.xda-developers.com/showpost.php?p=61101376&postcount=1706
R34 - http://forum.xda-developers.com/sho...ers.com/showpost.php?p=61345718&postcount=310
R4 - http://forum.xda-developers.com/showpost.php?p=61420409&postcount=350
R38 - http://forum.xda-developers.com/showpost.php?p=61863825&postcount=2038
R41 - http://forum.xda-developers.com/showpost.php?p=62566814&postcount=2195, http://forum.xda-developers.com/showpost.php?p=62450985&postcount=2128
R42 - http://forum.xda-developers.com/show...postcount=2306
R43 - http://forum.xda-developers.com/show...postcount=2326
R44 - http://forum.xda-developers.com/show...postcount=2342
F.A.Q. - Read this before complaining!
1. My phone exploded, HELP!
A: I don't answer to problems without a log. The log file is in /proc/last_kmsg. Paste it on pastie.org and link it on your post. Logcats are useless for Kernel purposes, don't bother posting them.
2. This kernel works on Y or X rom?
A: Works on CM12/12.1 and AOSP roms that have the latest wifi drivers. Not for stock roms!!
3. OMG BATTERY SUCKZ, ITZ DEAD IN 45 MINUTES, HELP!
A: As you can imagine I don't build kernels to decrease battery life. All the battery life problems come from your apps, either Facebook, or Maps, or some Location Service being enabled etc etc. Check your damn wakelocks and fix them, the kernel is not responsible for them.
4. How do I flash this?
A: Read the OP, theres a reason why I added instructions on it.
5. What is a data loss? Did I just had one?
A: Data loss is simply having the connection cut for X periods of time, usually few seconds. Grey bars means the device is not connected to Google services for some weird reason, but you'll still have internet connection.
6. OP is arrogant, I'm gonna call the Internet Police?
A: Deal with it.
7. D2TW not working? It may be a hardware issue
A: http://forum.xda-developers.com/showpost.php?p=64116915&postcount=138
Reserved
Many thanks to showp1984 for this info
What is msm_mpdecision?
100% kernel based multi core decision! (should cpu1/2/3 be online or not?)
This is a special version modded by neobuddy Plus the idle frequency and some load thresholds have been adjusted by me.
Some Configuration:
startdelay = time until mpdecision starts doing it's magic (20000)
delay = time between checks (130)
pause = if something else plugs in the cpu, fall asleep for 10000ms (10 secs)
scroff_single_core = if the screen is off, don't plug in cpu1/2/3. Additionally: Unplug all cpus except cpu0 when screen is turned off (1)
enabled = enable(1) or disable(0) mpdecision. This does not affect scroff_single_core!
min_cpus = min cpus to be online, cannot be < 1. Default: 1
max_cpus = max cpus to be online, cannot be > 4. (if you set it to 2 and min_cpus to 1 you will basically have a dualcore) Default: 4
idle_freq = a value against that will be checked if a core +/- is requested. (600 MHz)
mpdecision's input event boost, aka project butter
This will boost your min cpu speed if you touch the screen or press a button and gives you full control.
In those events the min cpu freq will be risen to a predefined value on every online cpu. This boosts overall reaction times and smoothness a lot. (works similar to the qcom mpdecision binary)
Thanks for bringing another kernel to our device, Kayant! Much respect!
On a side note, is Pink Kernel no longer being updated on the original developer's side, or have you abandoned it??
Thanks as always!
Thank you for your work, I will give it a try immediately!
hhrokarvi said:
Thanks for bringing another kernel to our device, Kayant! Much respect!
On a side note, is Pink Kernel no longer being updated on the original developer's side, or have you abandoned it??
Thanks as always!
Edit: Works Great with Dirty Unicorns and AICP!!
Click to expand...
Click to collapse
More developer side but from looking at github pinkflozd might be coming back soon maybe?
@Kayant good work dude!
So the reason my dt2w doesn't work is because I changed my screen? Thank you for clarifying that for me. I had a feeling that was my issue but I wasn't certain.
Sent from my Moto G 4G LTE (XT1045) Retail US variant
ROM: SaberMod 10 (5.1.1) 4/30 build
Carrier: Cricket Wireless
is it good for daily use?
Some of the option you have listed in the OP seem not to be present, I am referring to CPU underclocking (min freq. 300 MHz here) and GPU under/overclocking (min 200, max. 450)
My xt1039 does not boot... It shows the motorola logo, then il vibrates and the screen becames black.
I'm using the beeto's CM 12.1 and I can't find the log file..
Got another issue, too. IntelliPlug (max frequency with screen off: 300 MHz), Interactive governor. When I woke up the phone and started scrolling around, I found it a bit laggy; I checked in Kernel Adiutor, max and min frequencies were both set to 787 MHz, even though I personally set them to 300 MHz/1194 MHz before. Reverted back to Spirit Kernel for now!
Gianlu92 said:
Some of the option you have listed in the OP seem not to be present, I am referring to CPU underclocking (min freq. 300 MHz here) and GPU under/overclocking (min 200, max. 450)
Click to expand...
Click to collapse
Gianlu92 said:
Got another issue, too. IntelliPlug (max frequency with screen off: 300 MHz), Interactive governor. When I woke up the phone and started scrolling around, I found it a bit laggy; I checked in Kernel Adiutor, max and min frequencies were both set to 787 MHz, even though I personally set them to 300 MHz/1194 MHz before. Reverted back to Spirit Kernel for now!
Click to expand...
Click to collapse
You right I have updated the OP. There shouldn't be any problems will GPU stuff weird....
sclcn12 said:
My xt1039 does not boot... It shows the motorola logo, then il vibrates and the screen becames black.
I'm using the beeto's CM 12.1 and I can't find the log file..
Click to expand...
Click to collapse
Not sure why that would happen tbh. Were you on the stock kernel when you flashed?
Kayant said:
You right I have updated the OP. There shouldn't be any problems will GPU stuff weird....
Not sure why that would happen tbh. Were you on the stock kernel when you flashed?
Click to expand...
Click to collapse
Kayant I faced that issue as well. Apparently I tried to flash it on AICP, Beeto's Unofficial CM 12.1... It showed the bootlogo and then it would stay blank till I restart it or something. And I did reflash the ROM's cleanly before flashing this kernel
However it works fine on Official CM12.1 and BlissPOP.
Am I missing something?? Can @Flashhhh help some fellow Peregriners????
Kayant said:
Not sure why that would happen tbh. Were you on the stock kernel when you flashed?
Click to expand...
Click to collapse
Yes I was! Will try with another ROM, I'll flash AICP
Thank you anyway!
(If you have some time, take a look to slimrom thread, thanks )
Just flashed on official CM 12.1.
So far the frequencies seems to be workning as they should, will report back if anything weird happens. Using the kernels stock settings.
hhrokarvi said:
Kayant I faced that issue as well. Apparently I tried to flash it on AICP, Beeto's Unofficial CM 12.1... It showed the bootlogo and then it would stay blank till I restart it or something. And I did reflash the ROM's cleanly before flashing this kernel
However it works fine on Official CM12.1 and BlissPOP.
Am I missing something?? Can @Flashhhh help some fellow Peregriners????
Click to expand...
Click to collapse
Can u ask on rom's thread if they don't use modified ramdisk?
Flashhhh said:
Can u ask on rom's thread if they don't use modified ramdisk?
Click to expand...
Click to collapse
He said "I used CM Sources and I don't think they're modified."
hhrokarvi said:
He said "I used CM Sources and I don't think they're modified."
Click to expand...
Click to collapse
Ok I'll talk to @Kayant and try to solve the issue
Flashhhh said:
Ok I'll talk to @Kayant and try to solve the issue
Click to expand...
Click to collapse
Thanks Brother!! Looking forward to the outcome!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
I present to you my own kernel which has been built with many optimizations and tweaks. This kernel will work ONLY on Marshmallow roms(Not for stock roms) only.The main aim is to provide a stable kernel with optimizations.
I hope you all will like it
Kernel Features :
- Updated to latest cm-13.0 Sources
- Compiled With Custom ARCHI 5.2 Toolchain
- Additional many optimization flags
- Compiled With Cortex A7 Tweaks
- ARM v7 Optimizations
- LMK tweaks
- Disabled Gentle Fair Sleepers
- Disabled CRC check
- Reduced Swappiness from 60 to 40
- Set ReadAhead to 512
- Reclaimed RAM from Loggers.
- Enabled pipe flag
- Added SmartMax/LionHeart Govs
- Added Xperience/DanceDance Govs
- Optimized Slub
- PowerSuspend 1.5
- Cleaned Up some dead code
- Tweak mount options for all partitions
- Many more things (Check my github)
DOWNLOAD :
Grab it here
#ROM infos on the 4th post, be sure to check it
PLEASE DONT MIRROR LINKS
I Would like to say thanks to @ashwin007 for Cm bringup. Also a big thanks to @rainforce279 @TechnoAnder
@vatsal @faux123 @adarsh1998 and many more
XDA:DevDB Information
[ROM/Kernel][6.0.1][Uber 5.2.1/Archi 5.2] [CM-Optimised] INAZUMA R4, ROM for the Moto E
Contributors
zeeshanhussain12
Source Code: https://github.com/zeeshanhussain/inazuma-mm-new
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked bootloader with twrp
Based On: CyanogenMod
Version Information
Status: Beta
Beta Release Date: 2016-01-09
Created 2016-01-09
Last Updated 2016-02-16
Reserved
F.A.Q. - Read this before complaining!
1. My phone exploded, HELP!
A: I don't answer to problems without a log. The log file is in /proc/last_kmsg. Paste it on hastebin.com and link it on your post. Logcats are useless for Kernel purposes, don't bother posting them.
2. This kernel works on Y or X rom?
A: Works on all CM13 based roms. Not for stock roms!!
3. OMG BATTERY SUCKZ, ITZ DEAD IN 45 MINUTES, HELP!
A: As you can imagine I don't build kernels to decrease battery life. All the battery life problems come from your apps, either Facebook, or Maps, or some Location Service being enabled etc etc. Check your damn wakelocks and fix them, the kernel is not responsible for them.
4. How do I flash this?
A: Read the OP, theres a reason why I added instructions on it.
5. What is a data loss? Did I just had one?
A: Data loss is simply having the connection cut for X periods of time, usually few seconds. Grey bars means the device is not connected to Google services for some weird reason, but you'll still have internet connection.
6. OP is arrogant, I'm gonna call the Internet Police?
A: Deal with it.
So here's the surprise
Hello folks,
I am using my own optimised builds since initial phase of CM13. Rom and kernel are both build with Uber 5.2.1 and few more optimisations on the kernel (It's same like in the first post). The Uber Toolchain developer said due to new neon optimisations in Uber toolchains, the battery life has increased by 25%. Well using since a long time, I almost get 6hrs+ SOT(Ofcourse will vary with you) and a mindblowing performance. So I am going to provide weekly Uber CM13 builds with optimisations(It is somewhat close to pf-cm by Diamond Bond). The people interested, could use it , It will stay really close to CM and few picks here and there. I would really appreciate feedbacks I am using the build posted and it's really rock stable.
Download :-
All optimised buildshttps://www.androidfilehost.com/?w=files&flid=47307
Bugs:-
you tell me
Installation :-
A clean wipe is mandatory.
Wipe cache,dalvik cache, system, data
Flash the zip
Flash gapps ( I use slim zero gapps)
Reboot, Enjoy!
FAQ:-
Differences between UBERTC and other Toolchains
Changelog for the 1st December Toolchain updates
Regards
Installed your cm13 optimised unofficial build and inazuma mm-r1..
Build is smooth.. No lags..
But data doesn't work .no 2g/3g..
And also hw+ decoder not suppprted in MX player.
.
^HW+ decoder is not supported in android M.Only MX player developer can fix it.
---------- Post added at 02:00 PM ---------- Previous post was at 01:57 PM ----------
This is best Android M build till now.performance is awesome everything is working fine not sure about sd card as internal since i don't use it. but this rom has low volume.
piku 123 said:
^HW+ decoder is not supported in android M.Only MX player developer can fix it.
---------- Post added at 02:00 PM ---------- Previous post was at 01:57 PM ----------
This is best Android M build till now.performance is awesome everything is working fine not sure about sd card as internal since i don't use it. but this rom has low volume.
Click to expand...
Click to collapse
Low volume? NP I will increase volume a bit[emoji6]
Sent from my Moto E using Tapatalk
@zeeshanhussain12 Inazuma Kernel is smooth and amazing, good work.
Mobile data is not working since when installed. Root Explorer is also not working. Always FC.
Log
https://mega.nz/#!3Jh1zSzK!i6DwwuyYqyauH1UV4VpCW4QvwTcv4svnwlDY2zcNADs
leomalaj10 said:
Mobile data is not working since when installed. Root Explorer is also not working. Always FC.
Log
https://mega.nz/#!3Jh1zSzK!i6DwwuyYqyauH1UV4VpCW4QvwTcv4svnwlDY2zcNADs
Click to expand...
Click to collapse
Mobile data is being tested by beta testers since I don't have a 3g micro sim and root explorer won't be working with cm until you install third party busybox ,or until the dev brings about proper support with toybox.
ashwin007 said:
Mobile data is being tested by beta testers since I don't have a 3g micro sim and root explorer won't be working with cm until you install third party busybox ,or until the dev brings about proper support with toybox.
Click to expand...
Click to collapse
This problem with mobile data has been going on all ROMs 6.0.1. And it's not just me, has several complaints about it during the discussions. This even once had a post about it.
Esse problema com dados móveis vem acontecendo em todas as ROMs 6.0.1. E não é só comigo, tem várias reclamações sobre isso ao longo das discussões. Nesta mesmo já teve um post sobre o assunto.
leomalaj10 said:
This problem with mobile data has been going on all ROMs 6.0.1. And it's not just me, has several complaints about it during the discussions. This even once had a post about it.
Esse problema com dados móveis vem acontecendo em todas as ROMs 6.0.1. E não é só comigo, tem várias reclamações sobre isso ao longo das discussões. Nesta mesmo já teve um post sobre o assunto.
Click to expand...
Click to collapse
Mobile data seem to work fine in my builds.
Update :-
https://www.androidfilehost.com/?fid=24369303960683472
Changelog- added snap and rest same as official cm
Bugs - same as official cm13
I have added few more optimizations in the rom[emoji6]
Sent from my Moto E using Tapatalk
Update
https://www.androidfilehost.com/?fid=24369303960685296
Changelog- same as official Cm
I m postponing updates of kernel as I m going to rebase the kernel with otus kernel source
Sent from my Moto E using Tapatalk
UPDATE
https://www.androidfilehost.com/?fid=24369303960686931
Kernel update will come soon too
Awesome work sir?
Never expected such smoothness on our little device
Kernel Update R2
INAZUMA R2 BUILD UP
DOWNLOAD
CHANGELOG
Code:
*Git Rebased
* Build with uber gcc 5.2.1
a074da6 Add my Automated build script
7ae77c1 Fix Build
9c82a7f Fix compilation Errors
314b4cb Revert "timerfd: add alarm timers"
6e77ba4 Config : Sync with latest changes
7e36149 mach-msm: cpufreq: cleanup
f84840b workqueue: Added null check and warning
26a58be sched: Fix race in idle_balance()
ddd8877 mm: add cma pcp list
8a995ff idr: Backport from upstream
812cb5b security: force SELinux permissive mode
f6d9070 LCD_KCAL: Color control driver for msm8x10/mdp3
55db7b9 deadline: Allow 0ms deadline latency, increase the read speed
a5bd5f7 sched: Add sysinterface for GENTLE_FAIR_SLEEPERS
102dbbb sync: make complete dynamic_fsync.
0631742 fs/dyn_sync_cntrl: dynamic sync control
5ede347 condor: config: Enable optimized SHA-1
439b47e cfq-iosched: fix the setting of IOPS mode on SSDs
e949b81 block: Make CFQ default to IOPS mode on SSDs
848e1ca Fix Derp
0822bed Makefile: Optimizer arm flags
856d7d4 timerfd: add alarm timers
2515a2d rbtree: Backport from 3.10
1837234 fix compilation error
c7c30f9 cpufreq: zzmoove: scaling/zz_get_next_freq:
f60439c cpufreq: zzmoove: Fix lcd notifier and powersuspend compile issues - added missing part!
0a0da6d cpufreq: zzmoove: Fix lcd notifier and powersuspend compile issues due to a merge derp in 1.0 beta
cddca5e cpufreq: zzmoove: fix store_inputboost_typingbooster_cores undeclared here
c657e75 cpufreq: zzmoove: updated to the latest v1.0 beta8
4be6a96 cpufreq: Add Impulse, Smartmax, Yankactive, Zzmoove Governor
206aee1 block: Add SIO, VR, ZEN I/O schedulers
7018651 Alucard : Enable it by default
0a81cdc Alucard : Tune Alucard
e593fe9 Drivers : Remove Intellimm for now
823d003 Makefile : use std=gnu89
6a13625 Add support for Msm8610 (Condor and otus)
825c9c0 Initial porting of Intellimm from nexus devices
f1eb5e7 Alucard : Use get_cpu_idle_time
3e58c7d Alucard : fix build
d84652c Alucard: update to latest version
7e428ce Disable Alucard by default
02e1964 Mach-msm : Add Alucard Hotplug
ac02b08 dont add automatically generated file
056311a Update Local version
And much more check my github :)
R2-Beta with underclocked up to 96mhz up test and report if there is any issues r3 will come soon too
https://drive.google.com/file/d/0B3ABXfEjwUPCak95VXZValV1dTA/view?pref=2&pli=1
Sent from my Moto E using Tapatalk
Update
https://www.androidfilehost.com/?fid=24385226645962778
I have added my own ota in this build and now you will get my updates not official updates
Sent from my Moto E using Tapatalk
zeeshanhussain12 said:
R2-Beta with underclocked up to 96mhz up test and report if there is any issues r3 will come soon too
View attachment 3618533
https://drive.google.com/file/d/0B3ABXfEjwUPCak95VXZValV1dTA/view?pref=2&pli=1
Sent from my Moto E using Tapatalk
Click to expand...
Click to collapse
HEY bro am not seeing any commit regarding uc. did u uploaded it >>?
zeeshanhussain12 said:
Update
https://www.androidfilehost.com/?fid=24385226645962778
I have added my own ota in this build and now you will get my updates not official updates
View attachment 3618817
Sent from my Moto E using Tapatalk
Click to expand...
Click to collapse
After updating .it says my SD card corrupted , reformat to use it
Code:
/*
*
* I not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns do some research
* YOU are choosing to make these modifications,
* and if you point the finger at me for messing up your device, i will laugh at you.
*
*/
This is an extension of @TheSSJ and @friedrich420
Kernel Features:kernel.org Version : 3.10.101 (latest stable version)
Built with custom(self compiled) GCC 5.2.1 linaro toolchain
USB Ethernet Support
USB Adapter Drivers
Xbox One Support
Overcolcking-Underclocking (thanks to @TheSSJ)
CPU Optimizations
Interactive Governor from fugu
Async FSync from HTC
BLX implemented (thanks to @TheSSJ)
BLK-throttle improvements
ZRAM support
LZ4 Compression
exfat support
ntfs r/w support
Set minimum brightness to 2 instead of 15 percent (thanks to @TheSSJ )
sweep2sleep (on by default )
UKSM
True Dynamic Fsync [faux123]
KSM optimized
PowerSuspend [Yank555.lu]
CPU Governors:
- Intel
- Alucard
- Lagfree
- ConverativeX
- BioShock
- LionHeart
- YankActive
- Adaptive
- Wheatley
- Darkness
IO schedulers:
- row
- sio
- zen
- vr
- fifo
- fiops
- tripndroid
TCP congestion algorithms :
-westwood (default, much faster speed)
-cubic
-reno
-bic
-highspeed
-htcp
-vegas
-veno
-Illinois
EXTRA Features :
added init.d support
Implemented quickwake for better response
Power efficient Work queues for better battery
Tweaked Memory management
Downloads
builds :
Download
Nethunter Kernels:
Download
FLASH THE ZIP VIA TWRP
kernel source :
https://github.com/Zenfone2-Dev/kernel-FlareM
if you want me to add any new feature leave a post
Credits:
@TheSSJ for his work on the stock kernel
@friedrich420 for his work on the stock kernel
@deadman96385 for his work on the CM 12.1 kernel
@crpalmer, @jrior001 for bringing up the zf2 and its kernel
@osm0sis for his work on anykernel.zip
XDA:DevDB Information
[KERNEL]FlareX[LINARO][GCC 5.3.1][STOCK-5.0], Kernel for the Asus ZenFone 2
Contributors
say99
Source Code: https://github.com/Zenfone2-Dev/Flare-AEL-X
Kernel Special Features: Will edit this later
Version Information
Status: Stable
Current Stable Version: v1.0
Stable Release Date: 2016-04-25
Created 2016-04-25
Last Updated 2016-05-15
Reserved
Reserved
CHANGE LOG :
v2.0 1/05/2016
Fixed LED blink rate control.
Binder Optimizations
Intel-powerclamp drivers.
sem.c fixes.
Zram from googles 3.10.x kernel.
Vnswap and zswap
Alucard hotplug.
l1 l2 cache tweaks
tweaked lowmemorykiller
and more underhead tweaks.
v1.0 25/04/2016
updated AEL kernel to latest 3.10.101
updated to latest stock source
added almost all xpad drivers.
many underhead tweaks from flareM and upstream
minimum brightness back to 2
upstream mm fixes
fixed ext4 fs (in AEL kernel if you delete something from internal storage it does not gets reflected in the storage, the only option is to reboot)
and much more to come
Tq @say99 for make it happens
Sent from my ASUS_Z00A using XDA-Developers mobile app
build up
Thx for continue dev the zenfone 2 kernel?
say99 said:
build up
Click to expand...
Click to collapse
Unexpectedly.Good Luck
Heyyyy, glad to see you working on the stock part of zenlife
Really glad to test your kernel in-depth
TheSSJ said:
Heyyyy, glad to see you working on the stock part of zenlife
Really glad to test your kernel in-depth
Click to expand...
Click to collapse
thank you sir I wanted to put this up from a long time and now finally since I was on stock I did it.
Implemented notification led blink speed control just for fun, working on KA to add a entry for that now
Wow my friend i don't like stock but after that i am sure i will
say99 said:
build up
Click to expand...
Click to collapse
I know you hate me
---------- Post added at 11:49 PM ---------- Previous post was at 11:48 PM ----------
TheSSJ said:
Heyyyy, glad to see you working on the stock part of zenlife
Really glad to test your kernel in-depth
Click to expand...
Click to collapse
So happy to see you on XDA..
Nice job man, as always
you guys might notice a bit faster led blink rate, I am working on that, will fix it in next release
@rap_turkez When comes rom ??
Gesendet von meinem ASUS_Z00A mit Tapatalk
KarloHD said:
@rap_turkez When comes rom ?
Gesendet von meinem ASUS_Z00A mit Tapatalk
Click to expand...
Click to collapse
Wait
Ouww *----* Greta Work
Omg, is it real ?
---------- Post added at 10:34 PM ---------- Previous post was at 10:13 PM ----------
Is there no hotplug driver @@ ?
ThienJerry said:
Omg, is it real ?
---------- Post added at 10:34 PM ---------- Previous post was at 10:13 PM ----------
Is there no hotplug driver @@ ?
Click to expand...
Click to collapse
will add up hotplug driver from next release, this is an initial advanced release lol
Sent from my ASUS_Z00AD using Tapatalk
Hi is it working on stock lollipop rom?
moomoon03 said:
Hi is it working on stock lollipop rom?
Click to expand...
Click to collapse
You read the Op?
See the kernel is for Stock, Zenfone 2 has some other Stock besides lollipop?
Code:
/*
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*if you flashed it over marshmallow, i will laugh more than anyone would do !
*/
EMUI 5 ONLY !
Kernel features:
∆this kernel is intended to increase performance, without affecting battery
∆SIO io scheduler added
∆FIOPS io scheduler added
∆ROW io scheduler added
∆TRIPNDROID io scheduler
∆fast fingerprint wake up
∆ fsync on/off support
∆quick wake up added
∆F2FS file system support
∆tweaked stock governors (ondemand/interactive)
∆ NTFS file system support
∆ implemented mbcache2
∆ toggable crc check ( you can en/dis able it) (disabled by default)
∆ drop vfs cache pressure for more ram
∆ faster fingerprint wakeup, decreased duration to 2000ms (3000 was before)
∆ much faster /proc/vmstat for better performance
∆ disabled safetynet check
∆increased number tcp stream (you can do many network requests,more than normal ! )
∆optimized memory utilities
∆cpuidle enabled so as to improve power consumption
∆optimized sfck compression
∆increased threads of dm-crypt
∆set initial tcp window to 64k so as to improve speed.
∆Built with Anykernel package = it can be installed in any version & any model, and without losing root !
∆with this kernel and some small tweaks using kernel adiutor, you can reach 60k point in antutu benchmark ??
Download:
THIS FILES ARE FOR EVERY ROM/FIRMWARE EXCEPT ARSENIK V2 !
SMOKY-KERNEL-V3
SMOKY-KERNEL-V2
SMOKY-KERNEL-V1.1
SMOKY-KERNEL-V1
THIS LINK IS ONLY FOR ARSENIK V2, NOT ARSENIK V1.1 OR V1 ! ARSENIK V2 ONLY !
SMOKY-V2-FOR ARSENIK
Installation:
1/download and install Kernel adiutor
2/enable init.d by emulating it
3/backup boot only
4/Flash the Kernel zip in TWRP Recovery.
5/reboot
CHANGELOG
SMOKY-KERNEL-V2
+ implemented mbcache2
+ toggable crc check ( you can en/dis able it)
+ drop vfs cache pressure for more ram
+ faster fingerprint wakeup, decreased duration to 2000ms (3000 was before)
+ much faster /proc/vmstat for better performance
+ disabled safetynet check
SMOKY-KERNEL-V1.1
+added quick wakeup ( double tap 2 wake became faster)
+added tripndroid io scheduler
+added f2fs file system support
+tweaked stock governors (interactive/ondemand)
SMOKY-KERNEL-V1:
initial release
XDA:DevDB Information
Smoky Kernel for Huawei P9 Lite
Contributors
@simo255 (me)
i wanna really thank @OldDroid , because he helped me so as to build this kernel, after 1000 and 1 errors, if he wasn't here, you would have never seen this kernel !
Thank you @OldDroid !
Source Code: https://github.com/simo255/Smokey-Kernel
Version Information
Status: ~STABLE~
Created 2017-07-14
Last Updated 2017-07-25
can i use on meticulus builds?
hugor671 said:
can i use on meticulus builds?
Click to expand...
Click to collapse
nope, this kernel is only for emui 5 !
Nice to see development for this phone!
Can use otg with this kernel...
Waseem.haidernawa said:
Can use otg with this kernel...
Click to expand...
Click to collapse
im always finding a solution so as to enable otg but atm it isn't working
Ok so where is problem can u tell me ?
simo255 said:
EMUI 5 ONLY !
Kernel features:
∆SIO io scheduler added
∆FIOPS io scheduler added
∆ROW io scheduler added
∆fast fingerprint wake up
∆ fsync on/off support
∆ NTFS file system support
∆Built with Anykernel package = it can be installed in any version & any model, and without losing root !
Download:
SMOKY-KERNEL-V1
Installation:
1/download and install Kernel adiutor
2/enable init.d by emulating it
3/Flash the Kernel zip in TWRP Recovery.
4/reboot
XDA:DevDB Information
Smoky Kernel for Huawei P9 Lite
Contributors
@simo255 (me)
i wanna really thank @OldDroid , because he helped me so as to build this kernel, after 1000 and 1 errors, if he wasn't here, you would have never seen this kernel !
Thank you @OldDroid !
Source Code:https://github.com/simo255/Smokey-Kernel
Version Information
Status: ~STABLE~
Created 2017-07-14
Last Updated 2017-07-14
IF ANYONE WANNA TEST ANOTHER VERSION OF THE KERNEL(ALPHA) WHICH HAS NEW GOVERNORS, PLEASE SEND ME A PM
Click to expand...
Click to collapse
Hello there! I would love to test the alpha kernel
pafchu said:
Hello there! I would love to test the alpha kernel
Click to expand...
Click to collapse
ive sent you a pm
New update )
Can u enable motion future's like rise to ear i mean overall motion guesturs....
Waseem.haidernawa said:
Ok so where is problem can u tell me ?
Click to expand...
Click to collapse
well, i have to change a value inside the source code and build the kernel ,even the ramdisk, I'm trying one by one but none of them worked,
if i find a solution so as to enable it i will release a new version asap
any tricks to go back to stock kernel without flashing whole ROM again?
tw1st3d83 said:
any tricks to go back to stock kernel without flashing whole ROM again?
Click to expand...
Click to collapse
flash stock boot.img
simo255 said:
flash stock boot.img
Click to expand...
Click to collapse
can i extract and flash from ArseniK because i flashed SMOKY over ArseniK?
tw1st3d83 said:
can i extract and flash from ArseniK because i flashed SMOKY over ArseniK?
Click to expand...
Click to collapse
of course
Can you enable high clocks? Would be nice if I can get a bump in speed.
Hi friend. Can you suggest me the best settings in Kernel adiutor to get the best from this phone with your kernel?
If you Need a tester or help i'm ready
UPDATE !
check changelog for more infos
Paolo83 said:
Hi friend. Can you suggest me the best settings in Kernel adiutor to get the best from this phone with your kernel?
If you Need a tester or help i'm ready
Click to expand...
Click to collapse
hello,
for io scheduler , in internal storage use fiops io scheduler with 1024 kb read ahead
do the same for external storage, but with row io sched
disable crc check and fsync, done
you will have this result
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Click to expand...
Click to collapse
Hello, this kernel is for aosp/caf ROMS so no miui,
Our Telegram Chat group:
tg://join?invite=GIipsxIDOQxumb-ayOOrvQ
there you can come directly in contact with me.
Since my device got bricked, i finnished V3 to make my kernel oreo compatible and wish you a good time,
with my kernel and the Rom your choosing.
I will further support my kernel but i will not work on it (beside bugs) until i have a device
================================================== ==================================================
Voodoo is meant to give you great battery life and performance (depending on how you tune it , more on that later in the second post), essentially I tried to optimize it for everyday usage (gaming, media consumption. browsing the web, all that stuff), I'm not aiming to have the highest Antutu score (although it is very high, it's just not my focus), you see benchmarks don't really reflect actual everyday usage.
The main thing that I do is port good features and optimizations from the various OnePlus 3/3t kernels (they have many great kernel devs and a lot of their work can benefit us too), I also optimize the kernel settings and stuff like that
Its builded with Linaro Toolchain.
It is based off of the lineage kernel with tons of improvements from @mosimchah, and @Razziell for the base of this kernel. .
try it and report. (Interactive can lag on first time display is touch its because battery saving options, but not lag further than)
Here are some of the features
(check out the third, and fourth posts for more info)
Compiled with Linaro 7.2.x Toolchain a56 optimized
Linux version 3.18.89
Android 8.0 Oreo support
CAF tag 'LA.UM.5.6.r1-06500-89xx.0 (latest aurora)
CPU:
impulse governor (best Battery i think)
blu_active (best balance)
Relaxed
Chill
Optional overclock (-OC kernel)
GPU:
Adreno boost
Adreno idler
Screen
kcal
Backlight dimmer
I/O:
Improved deadline
improved cfq
bfq
sio
fiops
tripndroid
sioplus
zen
maple (default)
Virtual memory:
various optimizations
zram
zswap
ksm
entropy:
some optimizations
tcp-algorithms:
westwood
Misc:
Vibration Control
dynamic fsync toggle
Many more optimizations
Several wakelocks have been blocked
Added the ability to tweak the thermal throttle settings for the CPU (be very careful with this)
USB fast charge
faster unlock
improved network performance
Option to enable the disabled gentle fair sleepers
Option to enable software crc control
DONATE for a some coffee
Download Link
Mod edit, links removed.
Thanks to:
Razziell
darkobas and lineage for the amazing base and continued work on it
Sultan
Franco
dabug123
GalaticStryder
The Flash
There are many more
XDA:DevDB Information
Voodoo, Kernel for the Xiaomi Redmi 4 Prime
Contributors
unterwelt
Source Code: [url]https://github.com/unterwelt/android_kernel_xiaomi_msm8953[/URL]
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V7
Stable Release Date: 2017-11-30
Created 2017-09-24
Last Updated 2018-06-12
This is a work in progress guide to getting great battery life
Note: This guide is meant to be used on my kernel, there's several optimizations that I've left out of this guide because I enabled them by default in my kernel
1. In kernel adiutor, in the CPU section, change the cpu governor to impulse
2. Go to the governor tunables, and set the powersave_bias to 1 (warning, setting it to 1 can cause a lot of lag)
3. Underclock the cores to 1804Mhz
4. Set the GPU governor to simple_ondemand
5. Set the vibration strength to zero (or close to zero) in the misc section
6. Set the default I/O scheduler to noop
7. Go to developer options and turn off the logger buffer sizes (you will have to turn this back on in order to get a logcat for bug reports, and to pass safety net)
8. Use greenify to enable aggressive doze and doze on the go, and use it to limit background apps
10. Turn off all animations in developer options
11. In kernel adiutor set the low memory killer values to the aggressive setting
12. Disable fsync (risky, you could lose data if the system crashes)
================================================== ================================================== ================================================== ================================================== ==========
This is a work in progress guide to getting great Performance at the expense of battery life
Note: This guide is meant to be used on my kernel, there's several optimizations that I've left out of this guide because I enabled them by default in my kernel
1. Go to developer options and turn off the logger buffer sizes (you will have to turn this back on in order to get a logcat for bug reports)
2. Use greenify to enable aggressive doze and doze on the go, and use it to limit background apps
3. Turn off all animations in developer options
4. Overclock the cores to 2208mhz
5. Disable fsync (risky, you could lose data if the system crashes)
6. Enable ksm, and use zram for more free ram, good for gaming
7. Set the CPU governor to blu_active
More infos? Check out these guy(helped me alot) third post has good infos about the governors.
https://forum.xda-developers.com/le-pro3/development/kernel-blackscreen-pro3-aka-zl1-x727-t3594976/
Yeahhhhhh
I do not have a wifi connection (lineage 20170904)
unterwelt said:
More infos? Check out these guy(helped me alot) third post has good infos about the governors.
https://forum.xda-developers.com/le-pro3/development/kernel-blackscreen-pro3-aka-zl1-x727-t3594976/
Click to expand...
Click to collapse
You say the kernel version is up to 3.18.71 but your source and its branches did not reflect that. Please upload YOUR OWN changes as well as per GPL guidelines.
Kernel is uploaded
Custom kernel for miui would be great
Odoslané z Redmi 4 pomocou Tapatalku
domino2115 said:
Custom kernel for miui would be great
Odoslané z Redmi 4 pomocou Tapatalku
Click to expand...
Click to collapse
Use validos and this kernel. Try it and you will not need miui
unterwelt said:
4. Overclock the cores to 2208mhz
Click to expand...
Click to collapse
How to get overclock? I coulndt find mentioned core clock in kernel adiutor
aldirudianto said:
How to get overclock? I coulndt find mentioned core clock in kernel adiutor
Click to expand...
Click to collapse
Dont Quote the whole thread. It is for the experinental build upload it later im not at home.
@manulais i know your rom is too old, update it please. (Vendor is not uptodate)
unterwelt said:
Kernel is uploaded
Click to expand...
Click to collapse
So where's the commit history? How do we know you aren't hiding anything malicious?
All anyone can see is one large commit that says "first". Why are you doing this?
What are you hiding?
FaustTN said:
So where's the commit history? How do we know you aren't hiding anything malicious?
All anyone can see is one large commit that says "first". Why are you doing this?
What are you hiding?
Click to expand...
Click to collapse
Source code is opend. I update it later to v1.1 look into it. Trust me or not source code is opend thats what you (xda) wanted and now its not right? Your Problem look into source. But thanks for your hardwork really helped me alot.
unterwelt said:
Source code is opend. I update it later to v1.1 look into it. Trust me or not source code is opend thats what you (xda) wanted and now its not right? Your Problem look into source. But thanks for your hardwork really helped me alot.
Click to expand...
Click to collapse
If that is how it is going to be then please remove my name from the credits and any mention of it. I do not wish to be linked to this farce.
FaustTN said:
If that is how it is going to be then please remove my name from the credits and any mention of it. I do not wish to be linked to this farce.
Click to expand...
Click to collapse
Well i can sync your source from mido and sync my source and you had all your commits and my changes. Sry for bothering you
FaustTN said:
If that is how it is going to be then please remove my name from the credits and any mention of it. I do not wish to be linked to this farce.
Click to expand...
Click to collapse
Sorry to hear that. This farce is working very good and bug-free.
thomasginn said:
Sorry to hear that. This farce is working very good and bug-free.
Click to expand...
Click to collapse
+1 this kernel working great, on crDroid 7.1.2
+1 great kernel, great dev.
FaustTN said:
If that is how it is going to be then please remove my name from the credits and any mention of it. I do not wish to be linked to this farce.
Click to expand...
Click to collapse
Calm your Tits, he is contributing just like you.
Thank you for your hardwork,seems quite well-developed and I'm going to test it during this week,would you please tell me what do you think about all these optimizations added to this kernel https://forum.xda-developers.com/on...m13-x-cm14-x-ab123321-kernel-oneplus-t3545468 ?
Excuse me @unterwelt should I consider your absent reply as a "I don't about your suggestion because by my mind it's useless"