RADIOACTIVE KERNEL
For CM13(deprecated) and CM14.1 Based Roms!
Code:
/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
hi XDA community, i'm here to share with you my little project,since this device is very similar to the oneplus one device which i own decided to build a kernel for the zuk z1 because it barely have development and some friends ask me to do something and here i come, my primary goal is to provide a stable, fast and battery friendly kernel with some cool features
Current Features
General List:
Compiled with Uber-naro4.9 Toolchain
Anykernel Ramdisk compatible with all roms
Ukm into kernel zip
Fingerprint gestures
Cpu frequencies from 268000 to 2572000
Cpuquiet hotplug driver (replacement for mpdecision)
MSM limiter
Zzmoove native hotplug can be activated setting it in governor tunables
Option to enable/disable Fsync
Deadline, Row, Maple, Cfq, Bfq, Noop, Sio, Sioplus, Zen, Tripndroid
A bunch of cool governors.
Kcal Control: Colors, Saturation, Hue, Contrast and more
Gamma profiles into ukm
Gentle Fair Sleepers (Disabled by default)
Auto FS Laptop Mode
Arch Power
XZ Kernel Compression
Suspend estate freeze
Faux sound control
Optimized rwsem algorithm
Power efficient workqueues
Uv table interface (thanks @JoaoPaulo)
Disabled lot of debugging to gain performance
And much more to come....
[ RADIOACTIVE KERNEL INSTALL ]
Instructions:
* Boot into Recovery
* (Recommended) Make a complete backup of entire rom
* Flash Zip
* Reboot
* Install your prefered kernel tweaker app(synapse recomended)
* Enjoy!!!
CHANGELOG MARSHMALLOW
HERE
CHANGELOG NOUGAT
HERE
DOWNLOADS MARSHMALLOW
HERE
DOWNLOADS NOUGAT
HERE
THANKS!!!!
Thanks and Credits to developers
Of course, I had never been able to create all that by my own. So I want to give credits to the really good developers around, that have given me all the inspiration and from which I cherry picked lots of the implemented functionalities:
* LordBoeffla
* ZaneZam
* Ak
* Yank555
* Hardcore
* Chainfire
* AndreiLux
* Netarchy
* Gokhanmoral
* JoaoPaulo
* MrColdbird
* Entropy512
* Faux
* Harunjo
* nikhill
* FranciscoFranco
* Ak
* moludo
* Lozo2010
... I just hope I did not forget someone. If so, please let me know and I will add you of course.
Thanks to all of you for your great work
HALL OF FAME!!!!!
Huge thanks to all donors
@JulioMC--------10
@woonaval------15
@borx28----------20
@risoterapia-----15
@strongst-----10
@kepaware---10
@giorgiosimeoni----20
@sanangel------10
If someone else donated and isn't in the donors list please let me know and i'll add asap
XDA:DevDB Information
Radioactive Reborn kernel, Kernel for the Lenovo Zuk Z1
Contributors
acuicultor, JoaoPaulo
Source Code: https://github.com/acuicultor/Radioactive-kernel-HAM
Kernel Special Features: Stable, fast, battery friendly
Version Information
Status: Stable
Current Stable Version: REBORN_V3.14
Stable Release Date: 2016-11-16
Created 2016-04-11
Last Updated 2016-12-15
Reserved
Reserved
Radioactive kernel for our ZUK? Wow! More thanks, master!
Enviado desde mi Nexus 6P mediante Tapatalk
Thanks for all your work!!!!
@Heisenberg, hi opened the thread in general section by mistake, can you move to original section please? Thanks in advance.
Enviado desde mi A0001 mediante Tapatalk
Flashed!! Thanks for your kernel
Great work! Flashed and working perfect! :good:
Please update link file not found..
ATM01 said:
Please update link file not found..
Click to expand...
Click to collapse
I downloaded without any problems :bueno:
ATM01 said:
Please update link file not found..
Click to expand...
Click to collapse
Try again please.
Enviado desde mi A0001 mediante Tapatalk
This kernel works really fine, I'm using it with Coldbird's CM13 ROM.
Thanks thanks thanks!!!!!
acuicultor said:
@Heisenberg, hi opened the thread in general section by mistake, can you move to original section please? Thanks in advance.
Enviado desde mi A0001 mediante Tapatalk
Click to expand...
Click to collapse
Done :good:
woonaval said:
This kernel works really fine, I'm using it with Coldbird's CM13 ROM.
Click to expand...
Click to collapse
I havn't tried that. Are there any notable differences between OP's Kernel and MrColdBird's Kernel?
Raynors233 said:
I havn't tried that. Are there any notable differences between OP's Kernel and MrColdBird's Kernel?
Click to expand...
Click to collapse
I haven't been able to test it thoroughly, but a thing that is noticeable is that battery consumption while screen-off is better than with Coldbird's.
Please notice that by installing this kernel you will lose Coldbird's fancy feature of fingerprint unlocking with the screen off, also gestures in home button. I think they want to implement it in the future, though.
EDIT: from version 1.01, Coldbird's fancy feature is also present in this kernel and also SuperSU works fine again
Thank you for your work!
Tell me why does not work root, no built-in or installed SuperSu through TWRP.
Resurrection Remix
woonaval said:
I haven't been able to test it thoroughly, but a thing that is noticeable is that battery consumption while screen-off is better than with Coldbird's.
Please notice that by installing this kernel you will lose Coldbird's fancy feature of fingerprint unlocking with the screen off, also gestures in home button. I think they want to implement it in the future, though.
Click to expand...
Click to collapse
Nice answer, thx! I'll try it after the fingerprint unlocking feature had been implemented.
Yes battery consumption is good but missing FP feature..
what application you recommend for kernel settings ?
Sent from my Z1 using XDA-Developers mobile app
The Best firmware for our zuk!!! @acuicultor, fingerprint works without PRESS for unlock?
Enviado desde mi Z1 mediante Tapatalk
Related
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Please read completely this thread before using for minimize FAQ
If you coming from other custom kernel, please restore to cm kernel or dirty flash your rom before flash this!, to make sure everythings go to original and prevent from unexpected bugs.
THIS DOESN'T SUPPORT FOR STOCK ROM!
Requirement
TWRP
CM 13.0 or AOSP 6.0.1
Features for Reborn
Linux 3.4.113
Hybrid Kernel
Sync Latest Cyanogenmod source
Compiled with Uber 4.9
Powersuspend 1.7
Doubletap2 Wake support (DT2W enabled by default).
WakeGesture with Pocket Mode.
Fsync Control Sysfs.
added io scheduler : sio, zen, tripndroid, fifo
added cpu governor : badass, smartassH3, clarity, lionheart and nightmare
added gpu governor : conservative (default)
Faux sound control
Faux simple gpu algorithm
Gentle fair sleeper and power arch sysfs
true zsmalloc/zram from linux 3.17.y
Cherry pick from any other source.
NOTE
Please do not make some request, i just make this kernel lightweight with some usefull features.
BUGS ?
You tell me with proper logs
Credits
Google
CyanogenMod
Motorola
Ashwin007 - Squid2
Christopher83
Savoca
franciscofranco
Faux123
Arter97
Donation list
Code:
[CENTER]
electrohippie - $5
[/CENTER]
Download for Reborn Final
https://www.androidfilehost.com/?w=files&flid=140803
Donate Me
XDA:DevDB Information
Clarity Kernel Reborn/Revolution, Kernel for the Moto E
Contributors
rainforce279
Source Code: https://github.com/ryan-andri/android_kernel_motoe/commits/condor/cm-13.0
Kernel Special Features: Multiple custom hotplug, Wake Gesture
Version Information
Status: Stable Final
Current Stable Version: Reborn Final
Stable Release Date: 2017-01-01
Created 2016-06-25
Last Updated 2017-01-01
Please Check my github, Thanks
great rainforce279 that good you came back with another kernel amazing , this time use all the time you want to launch an upgrade , the only thing I ask is that if there are changes in the kernel cyanogenmod this you update device the kernel to the latest sources cyanogenmod
hetor99 said:
great rainforce279 that good you came back with another kernel amazing , this time use all the time you want to launch an upgrade , the only thing I ask is that if there are changes in the kernel cyanogenmod this you update device the kernel to the latest sources cyanogenmod
Click to expand...
Click to collapse
yes i'll do, and this using the latest source cyanogenmod.
Oh yes!
Would you mind to make a permissive or enforcing selinux mode choice in next build? Great to see Clarity (again).
Sent from my Moto E using XDA Labs
rian_tama said:
Oh yes!
Would you mind to make a permissive or enforcing selinux mode choice in next build? Great to see Clarity (again).
Sent from my Moto E using XDA Labs
Click to expand...
Click to collapse
I use RR, but I would like this option in the kernel. Very happy to see Clarity back to my device
Big FAT Thanks
good to see clarity back. one question though, did you picked up the project where it was left or you are starting this project from the scrap?
great work man. and Thanks...
good work bro, nice kernel!
Thank you!
Also a big fat Thank You from me!
I'm happy that you're back and because of that fact I'm gonna donate now.
cheers
Awesome man!!! Thanks a lot!!!
rian_tama said:
Oh yes!
Would you mind to make a permissive or enforcing selinux mode choice in next build? Great to see Clarity (again).
Sent from my Moto E using XDA Labs
Click to expand...
Click to collapse
will trying it.
brundark said:
I use RR, but I would like this option in the kernel. Very happy to see Clarity back to my device
Click to expand...
Click to collapse
nice to make you happy, thanks for using this.
deepuluck said:
Big FAT Thanks
good to see clarity back. one question though, did you picked up the project where it was left or you are starting this project from the scrap?
great work man. and Thanks...
Click to expand...
Click to collapse
thanks man , yeh it started from begining, not started from where i left clarity.
TechnoAnder said:
good work bro, nice kernel!
Click to expand...
Click to collapse
thanks you bro.
electrohippie said:
Also a big fat Thank You from me!
I'm happy that you're back and because of that fact I'm gonna donate now.
cheers
Click to expand...
Click to collapse
Big thanks bro, i was add your name at op's as donation list.
many thanks.
cerberusss said:
Awesome man!!! Thanks a lot!!!
Click to expand...
Click to collapse
your welcome
Update to stable 1.1
Download
https://www.androidfilehost.com/?w=files&flid=72788
changelogs:
- 9e24088 config: push clarity reborn 1.1
- 3d2a897 Makefile: tell gcc to tune all code
- 1ce6256 arch power: disable by default
- 3643dce sched: cpu_power: Add controls for sched features
- cae77e1 sched: Add sysinterface for GENTLE_FAIR_SLEEPERS
- be2e768 msm8610/8226: don't use deprecated swp{b} in ARMv6+
- b8ae1f9 add faux sound control 3.4
- a3bc719 devfreq: simple_gpu_algorithm: prevent overflow pwrlevel
- 6c347f5 Simple GPU Algorithm: Initial coding for devfreq based Adreno Drivers
- 5f893cd dt2w: improve accuracy of single touch detection
Thanks.
Update
Updated kernel is good. Was missing faux sound control.So Thanx.... :good:
Hey can you pls consider underclocking the cpu. Missing that too from clarity r26...Pls.....
And Since I haven't used any other cpu governor else than impulse. So Could You Pls Tell which one of the present governors is good for battery backup or atleast similar to impulse.
Update to stable 1.2
Download
https://www.androidfilehost.com/?w=files&flid=72788
Changelogs:
- a3a8837 config: clarity reborn 1.2
- 60537d5 Makefile: build with Linaro 5.2
- 9a0400f cpufreq: Introduce new relation for freq selection
- 59b9632 cpufreq: add impulse and ondemandplus governor
Yeeeah, Clarity again!
Hi, Rainforce.
I want to get the max possible SOT on my device by changing the kernel settings, what would be the best suggested settings over default settings on your kernel ? Thanks in advance.
Works in falcon or xt1021?
Cheers
ProudRed said:
Hi, Rainforce.
I want to get the max possible SOT on my device by changing the kernel settings, what would be the best suggested settings over default settings on your kernel ? Thanks in advance.
Click to expand...
Click to collapse
i was push version 1.3 with some feature to save battery, all adding intelliplug and alucard it your choice
Vicrol123 said:
Works in falcon or xt1021?
Cheers
Click to expand...
Click to collapse
this only for condor (xt1021/1022) cm 13 only.
never flash this to other devices, it will break your devices.
Deleted, dopost.
Update to stable 1.3
Download
https://www.androidfilehost.com/?w=files&flid=72788
changelogs:
- add Intelliplug and Alucard hotplug (use just one hotplug only, dont enable all hotplug or your device will going crazy!)
- add Power Efficient Workqueue (Sacrifice Performance for saving battery).
check to second post for completly build logs.
Thanks and have a nice day
Donate Me to Buy a Coffee
•=||=•INTRODUCTION•=||=•
A custom kernel for Moto G 2015 a.k.a Osprey
This should should work on all oreo custom roms
Disclaimer
Code:
[color="red"]
* Include <std_disclaimer.h>
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features
included in this KERNEL.
* Before flashing it! YOU are choosing to make these modifications .
* If you point the finger at me for messing up your device, I will laugh at you.
[/color]
•=||=•KERNEL SPECIAL FEATURES•=||=•
CPU
Code:
[center]
Cpu quiet firmware
Improved Default governers and io schedulers
Dynamic Fsync
Arch Power savings
TouchBoost
Power Suspend Mode
Work queue Power saving
Msm limiter
CPU GOVERNERS
Code:
[center]
ElementalX
LionFish
Zzmove
Darkness
Blu active
[/center]
HOTPLUGS
Code:
[center]
Lazyplug
[/center]
IO SCHEDULERS
Code:
[center]
Sio plus
Zen
Sio
Fiops
Trindroid
Sioplus
Fifo
[/center]
GPU
Code:
[center]
Adreno Idler
Msm thermal temperature control
[/center]
SCREEN
Code:
[center]
Kcal Control
High Brightness Mode
[/center]
MISC
Code:
[center]
Upstreamed to latest linux stable v3.10.108
Built with Linaro 7.2
Several changes which improve the battery drain when idle
Double tap to wake
Force Fast Charge
Sound Control
Wakelocks Blocking
Software crc control
TCP congestion algorithm
Radio Power Savings
[/center]
•=||=•INSTALL INSTRUCTIONS•=||=•
Code:
[center]
1.Download the kernel zip.(You don't wanna??)
2.Move it to phone's memory or sdcard. ( Or in your brain ,you better know)
3.Boot to twrp or any other working recovery.(Or flash it by fastboot)
4.Backup Current boot image(in case your luck is bad or you try to install this on nougat)
5.Flash the zip( go get a torch)
6.Reboot!!!!done( Congrats you have rebutted yourself)
[/center]
•=||=•DOWNLAODS•=||=•
Download from AFH
Download from GDRIVE
•=||=•BUGS•=||=•
What are you looking for?
Bugs???
You won't find it.
You are so desperate aren't you??
ok you win
You tell me
[/CENTER]
XDA:DevDB Information
BLEEDING EDGE, Kernel for the Moto G 2015
Contributors
@ki, ishubhamsingh, Subrajyoti Sen,Facum
Source Code: Kernel Source
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: v69
Beta Release Date: 2018-06-15
Created 2018-02-25
Last Updated 2018-06-15
v69 15.06.18
* Completely rebased the kernel
* Removed all existing hotplugs
* Added lazyplug
* Slimbus overclock
* Sdcard 0kb bugfix
* Enabled Exfat driver
* Added livedisplay support
* New cdg tcp congestion
* Maple IO scheduler
* Allow 320K AAC encoding
* Improved Adreno Idler
* Improved Deep sleep
* IOSCHED switcher
* Updated Powersuspend driver
* Added chill and relaxed cpu governer
* Input boost
* Sound control
And many battery and performance changes
v69 beta release
* Added msm limiter
* Radio power savings
* New schedulers
* New cpu governers
* Tcp congestions
* Introduce cpu quiet firmware
* RCU improvements
* Built with Bleeding edge 7.3 toolchain
* Add boeffla_wl_blocker
* Improve Adreno Idler
* Introduce Input boost
* Sound improvements
* 64 bit binder support
* Binder fixes
* Improved Deep sleep
@ishubhamsingh and @Alberto97 for their base of kernel
@facuarmo for teaching me
@Subhrajyoti Sen for his heliox commits
@nathanchance for his great guide on upstreaming kernel
Me for Building it for Osprey
Whole opensource community
If i missed anyone ...Quote me
Reserved
...
Amazing, thanks for this kernel and for your work!
It can be made compatible with nougat?
Merlin support ?
Work in Merlin?
cesarXP said:
Merlin support ?
Click to expand...
Click to collapse
gtajunior said:
Work in Merlin?
Click to expand...
Click to collapse
Currently No..
---------- Post added at 08:17 AM ---------- Previous post was at 08:16 AM ----------
kurapika7 said:
Amazing, thanks for this kernel and for your work!
It can be made compatible with nougat?
Click to expand...
Click to collapse
No.. It's For Oreo 8.1 Rom's
Support z-ram? For 1gb Osprey
cesarXP said:
Merlin support ?
Click to expand...
Click to collapse
Will try if i get time
gtajunior said:
Work in Merlin?
Click to expand...
Click to collapse
Currently no
MrNataan said:
Support z-ram? For 1gb Osprey
Click to expand...
Click to collapse
It should.... although i Haven't tested
This is a great custom kernel: responsive, fluid, extremely stable, nice features and baked-in mods. Using this kernel on my xt1548 Osprey with Android Oreo Go Edition (Pixel Experience) by developer @Subinsmani. I've noticed no bugs or instabilities. Overall an extremely stable and feature filled kernel. Excellent work OP! :good:
@ki said:
It should.... although i Haven't tested
Click to expand...
Click to collapse
yes z-ram is there...
look past commit by shubham...
btw gud work man...
hope in coming days more tweaks will update... ?
MotoJunkie01 said:
This is a great custom kernel: responsive, fluid, extremely stable, nice features and baked-in mods. Using this kernel on my xt1548 Osprey with Android Oreo Go Edition (Pixel Experience) by developer @Subinsmani. I've noticed no bugs or instabilities. Overall an extremely stable and feature filled kernel. Excellent work OP! :good:
Click to expand...
Click to collapse
Ooh thanks for the compliment..
But be sure to report for a bug or a feature request....will try if possible
Subinsmani said:
yes z-ram is there...
look past commit by shubham...
btw gud work man...
hope in coming days more tweaks will update... ?
Click to expand...
Click to collapse
I know zram is there ...lol
I don't know if it works or not....
I cannot test for osprey as i dont have the device ..
Just built it for osprey as it is Msm8916
For future builds i will be needing testers(which i already have)?
@ki said:
I know zram is there ...lol
I don't know if it works or not....
I cannot test for osprey as i dont have the device ..
Just built it for osprey as it is Msm8916
For future builds i will be needing testers(which i already have)[emoji16]
Click to expand...
Click to collapse
@rahul9999 certified tester for osprey and @kvijaya.. [emoji23]
Sent from my MotoG3 using Tapatalk
@ki said:
I know zram is there ...lol
I don't know if it works or not....
I cannot test for osprey as i dont have the device ..
Just built it for osprey as it is Msm8916
For future builds i will be needing testers(which i already have)[emoji16][/QUOTE @rahul9999 certified tester for osprey and @kvijaya.. [emoji23]
Sent from my MotoG3 using Tapatalk
Click to expand...
Click to collapse
Hehehe.. why not youreself mani ?:silly:
rahul9999 said:
Subinsmani said:
Hehehe.. why not youreself mani ?:silly:
Click to expand...
Click to collapse
he he he sed.. we all are testers..
testers_lyf..
Click to expand...
Click to collapse
@ki said:
I know zram is there ...lol
I don't know if it works or not....
I cannot test for osprey as i dont have the device ..
Just built it for osprey as it is Msm8916
For future builds i will be needing testers(which i already have)?
Click to expand...
Click to collapse
When r u building it for merlin?
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this modification
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Kernel is now compatible with all roms!
Features
Linux kernel version 4.9.119
Compiled with GCC 8.2.1 toolchain with SoC specific optimizations
Sound Control by Flar2
Systemless installer(AnyKernel2) which automatically detects Magisk(no need to reflash Magisk after kernel install)
Enable/disable Fsync
Dynamic stune and cpu boost
Wireguard support
Kcal Control
Some debugging and logging disabled
CIFS support
Backlight dimmer option and high brightness option
Boeffla Wakelock Control
Sweep2sleep, Sweep2Wakevibration control
Avengers theme support (flash Nathanchance's enabler zip)
Adrenoboost(disabled by default)
Frandom support
Vibrator Strength tuning with Gesture Haptic Feedback control
Compatible with Kernel Adiutor and other such apps
Download
Download for OOS roms
Download for AOSP-based roms(AEX/Omni/Havoc/Lineage etc)
For detailed changelog,look at source code below
Credits
nathanchance for his reference repository
flar2
eng.stk
tbalden
sultanxda
joshuous
XDA:DevDB Information
Cranium Kernel for One Plus 6, Kernel for the OnePlus 6
Contributors
sakindia123
Source Code: https://github.com/sakindia123/cranium_kernel_enchilada
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V1.0.1
Stable Release Date: 2018-08-05
Created 2018-07-30
Last Updated 2018-08-06
Download link??
elikplim442 said:
Download link??
Click to expand...
Click to collapse
Download link added.Some issues with DevDB upload
Another choice!
wow! thak you so much.
Where do we get the Avengers theme from? Is there a download link for it?
robbase23 said:
Where do we get the Avengers theme from? Is there a download link for it?
Click to expand...
Click to collapse
It is included in OOS. You just need to flash Nathans enabler that sets the value through my Avengers driver (included in the kernel). Go to display settings and choose Avengers theme.
@sakindia123
Welcome here, nice to see one more dev
Gesendet von meinem ONEPLUS A6003 mit Tapatalk
Enabler
pappschlumpf said:
It is included in OOS. You just need to flash Nathans enabler that sets the value through my Avengers driver (included in the kernel). Go to display settings and choose Avengers theme.
@sakindia123
Welcome here, nice to see one more dev
Gesendet von meinem ONEPLUS A6003 mit Tapatalk
Click to expand...
Click to collapse
I don't see a Nathan enabler in the OP
I don't see a Nathan enabler in the OP
Click to expand...
Click to collapse
Link added to OP
Changelog v1.0.1
Code:
[B] V1.0.1[/B]
[LIST]
[*]Update to Linux 4.9.117
[*]Introduce Adreno Idler by Arter97
[*]Disable some unneded drivers
[*]Enable advanced TCP congestion and set Westwood as default
[/LIST]
Download- https://androidfilehost.com/?fid=5862345805528066378
Working amazingly on Omni rom! Faster than anything I've ever tried! :good:
eminem5055 said:
Working amazingly on Omni rom! Faster than anything I've ever tried! :good:
Click to expand...
Click to collapse
Do features related to vibration work correctly in Omni with this kernel?
sakindia123 said:
Do features related to vibration work correctly in Omni with this kernel?
Click to expand...
Click to collapse
Yes.
Kernel seems work on havoc aswell. Finally i can lower vibration intensity and speaker sound (ring). Thank you
Gesendet von meinem ONEPLUS A6003 mit Tapatalk
Changelog v1.0.2
Kernel is now compatible with both OOS and AOSP-based roms(different downloads for both)
Code:
[B] V1.0.2[/B]
[LIST]
[*]Update to Linux 4.9.119
[*]Enable JUMP_LABEL
[/LIST]
Download
Download for OOS roms
Download for AOSP-based roms(AEX/Omni/Havoc/Lineage etc)
Code:
*
* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
NeonKernel is a custom kernel for the Mi 6X (wayne), also there will be version for Mi A2 (jasmine) if requested.
Features:
Code:
- Linux 4.4.179
- Built with latest AOSP Clang.
- Kernel based on clean import.
- EAS With our own energy model
- Tweaked CFQ IOSCHED
- Anxiety IOSCHED
- DT2W
- Westwood TCP Cong enabled
- Changed haptic feedback
- Audit disabled
- KCAL
- Initial GPU freq is 160MHz
- F2FS Supported
- Inbuilt custom thermals config (by rcstar6696)
This is first beta build, tested on pie MIUI and few custom ROMs. If you've stuck on Mi logo after flashing kernel, hold power button until phone reboots twice.
How to install
Code:
1. Flash zip via TWRP (or any other recovery)
2. Wipe Cache & Dalvik (optional)
3. Done. Reboot into system.
Download: Telegram channel (mostly updated), GitHub
If you've got any questions or problems, join our telegram group.
Contributors:
hypeartist, me, rebenok90x
Source code: [url]https://github.com/NeonKernel/NeonKernel[/URL]
Also thanks to everyone who have helped me/I've picked commits from.
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Version Information
Status: Beta
Created 2019-04-30
Last Updated 2019-04-30
reserved.
can you make seperate package without thermal config for next build? thanks
help
Hi, I recently installed this kernel on my mi 6X with Xiaomi .eu latest stable rom 10.3.2 and de double tap to wake feature isn't working porpertly. I hope you can help me, thanks.
Greetings from Colombia
Daniel Olivares said:
Hi, I recently installed this kernel on my mi 6X with Xiaomi .eu latest stable rom 10.3.2 and de double tap to wake feature isn't working porpertly. I hope you can help me, thanks.
Greetings from Colombia
Click to expand...
Click to collapse
Try disabling selinux from enforcing to permissive.
in terminal type these below
su
Press enter then type
setenforce 0
Press enter
(to check the status though you can write getenforce and it'll tell you if permissive or enforcing)
After that in Settings if you have a enable / disable DT2W switch turn it off then on again, turn off screen and test.. but recently for me even that doesn't work anymore as it seems whoever makes builds of Mokee rom for my device removed DT2W from the rom instead of fixing it not working when enforcing
Don't think the kernel is the problem, rather it's the rom
ZaldhyDarwin said:
can you make seperate package without thermal config for next build? thanks
Click to expand...
Click to collapse
Next build will be without thermals at all. Comes soon, I hope
where can I download this kernel?
inVain_theGenuine said:
where can I download this kernel?
Click to expand...
Click to collapse
Did you read the OP post ?
Neverhopless said:
Did you read the OP post ?
Click to expand...
Click to collapse
I did!
heck, I even re-read it!!!
did you try to click the github link ?
inVain_theGenuine said:
I did!
heck, I even re-read it!!!
did you try to click the github link ?
Click to expand...
Click to collapse
Did you try to click the Telegram link ?
Neverhopless said:
Did you try to click the Telegram link ?
Click to expand...
Click to collapse
I don't have any telegram account.
does that mean the github link is broken ?
inVain_theGenuine said:
I don't have any telegram account.
does that mean the github link is broken ?
Click to expand...
Click to collapse
Yes
Optimus Drunk Kernel for POCO X2/Redmi K30
Code:
#include <std_disclaimer.h>
/*
* Your warranty is... Still valid??.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features:
- Updated to latest Linux kernel tag
- Built with latest AOSP clang
- AnyKernel3
- Wireguard support
- Spectrum Support
- Shadow Call Stack
- Wakelock blocker
- KLAPSE Support
- Westwood (default) & BBR TCP
- Sio, Fiops, Zen & Maple (default) I/O Schedulers
- Optimisations from other kernels
Download:
Github
FK Manager config
Installation:
Dirty flash your rom if you have another custom kernel installed
Flash the zip in TWRP or FK Manager and reboot, that's all
XDA:DevDB Information
Optimus Drunk Kernel for POCO X2, Kernel for the Xiaomi Poco X2
Contributors
GtrCraft
Source Code: https://github.com/GZR-Kernels/Optimus_Drunk_Phoenix
Kernel Special Features:
Version Information
Status: Stable
Created 2020-03-30
Last Updated 2020-09-11
Download link and instructions please.
EDIT: Got it, thank you so much.
GtrCraft said:
Optimus Drunk Kernel for POCO X2/Redmi K30
Code:
#include <std_disclaimer.h>
/*
* Your warranty is... Still valid??.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features:
- Built with Clang 10.0.4
- AnyKernel3
- MIUI compatible
- Wireguard support
- Wakelock blocker
- Westwood TCP
- Sio, Fiops, Zen & Maple (default) I/O Schedulers
- Optimisations from other kernels
Downloads:
Android 10:
FK Manager config
Github
Installation:
Dirty flash your rom if you have another custom kernel installed
Flash the zip in TWRP or FK Manager and reboot, that's all
XDA:DevDB Information
Optimus Drunk Kernel for POCO X2, Kernel for the Xiaomi Poco X2
Contributors
GtrCraft
Source Code: https://github.com/GZR-Kernels/Optimus_Drunk_Phoenix
Kernel Special Features:
Version Information
Status: Beta
Created 2020-03-30
Last Updated 2020-03-30
Click to expand...
Click to collapse
Very good, X2 development is just taking off now.
I flashed it with MIUI.eu 11.0.13. Will give feedback later ??
Update : after a whole I realised that my screen won't turn of during calls & voice notes. It's all fixed after I flashed back the stock kernel. Not sure what's the problem but I hope you can take a look at it ?
Beta 2 is here:
https://github.com/GZR-Kernels/Optimus_Drunk_Phoenix/releases/tag/b2
Changelog:
Rebased on AOSiP kernel
Fixed proximity sensor
Made kernel zip smaller
hoodlumfird said:
I flashed it with MIUI.eu 11.0.13. Will give feedback later
Update : after a whole I realised that my screen won't turn of during calls & voice notes. It's all fixed after I flashed back the stock kernel. Not sure what's the problem but I hope you can take a look at it
Click to expand...
Click to collapse
Fixed in the just released beta 2
GtrCraft said:
Fixed in the just released beta 2
Click to expand...
Click to collapse
I flashed beta 2 & I noticed autobrightness works veryy well unlike before. Proximity sensor works well also. Not to forget that beta 2 feels buttery smooth (it was a bit laggy with beta 1)
Thank you for you hard work keep it up ??
I understand yours effort sir, but just heads up that everyone here devloping kernels or roms have their own method of flashing, why this is happening? isn't every dev sync up or they have common recovery through which they can flash things normally. (Not talking abt EU rom users). for arter most of poco users need to flash kernel and then stock recovery. then it will flash and work.. In optimus kernel, it doesnt worked on stock recovery but its stuck on boot logo and again i flash fake twrp of K30 and then i flashed my stock rom and your kernel and it worked. even arter rom has different flashing technique and other devs for roms have other flashing techniques.
So may I know why everyone have different techniques here to flash? its quiet time consuming and we need to research on how to flash it and make things work.
Hard_Rock83 said:
I understand yours effort sir, but just heads up that everyone here devloping kernels or roms have their own method of flashing, why this is happening? isn't every dev sync up or they have common recovery through which they can flash things normally. (Not talking abt EU rom users). for arter most of poco users need to flash kernel and then stock recovery. then it will flash and work.. In optimus kernel, it doesnt worked on stock recovery but its stuck on boot logo and again i flash fake twrp of K30 and then i flashed my stock rom and your kernel and it worked. even arter rom has different flashing technique and other devs for roms have other flashing techniques.
So may I know why everyone have different techniques here to flash? its quiet time consuming and we need to research on how to flash it and make things work.
Click to expand...
Click to collapse
I can't change the way others want you to flash kernel or rom.
But for me you can use the Redmi K30 twrp from xiaomi.eu of Franco Kernel Manager as stated in OP, it doesn't matter.
And it doesn't matter which recovery you have.
Update time:
https://github.com/GZR-Kernels/Optimus_Drunk_Phoenix/releases/tag/b3
Changelog:
-Updated Wireguard to 1.0.20200401
-Added KLAPSE & Force Fastcharge (Disabled by default)
Can you add exfat support? Thanks
时光477 said:
Click to expand...
Click to collapse
That will happen, but when I don't know as I am waiting for a better source to use
Update:
https://github.com/GZR-Kernels/Optimus_Drunk_Phoenix/releases/tag/b4
Changelog:
-Updated Wireguard to 1.0.20200413
-Removed Force Fast Charge
-Add ExFAT & BBR TCP
-Built with Clang 10.0.6
First stable release:
https://github.com/GZR-Kernels/Optimus_Drunk_Phoenix/releases/tag/v10.0
Changelog:
-Rebased on Arter kernel bringup
-Updated to 4.14.176
-All features are still here
Its works on miui latest 11.07 (rooted)?
fromjeet said:
Its works on miui latest 11.07 (rooted)?
Click to expand...
Click to collapse
Read the OP
not able to download from fkm
Update:
https://github.com/GZR-Kernels/Optimus_Drunk_Phoenix/releases/tag/v10.1
Changelog:
* Updated to 4.14.177
* Added some powersaving features
GtrCraft said:
Update:
https://github.com/GZR-Kernels/Optimus_Drunk_Phoenix/releases/tag/v10.1
Changelog:
* Updated to 4.14.177
* Added some powersaving features
Click to expand...
Click to collapse
In custom roms when touch power button to lock it selects first item like dialer can u check it
vny10 said:
In custom roms when touch power button to lock it selects first item like dialer can u check it
Click to expand...
Click to collapse
It's a known issue related to the vendor, not the kernel.