Hello friends, today I'm going to tell you how to do the painting while opening your device.
And That You Did It Splash.how to open IMG file flashla the search process you'll do I'll tell you.
I Have Done Primarily From Below Lenovo_Vibe_P1_Splash_Maker.zip The File Named Download.
Creating Splash
First, Run The Program.
Late Summer And The Security Section Front Please.
Then Press To Create A Splash From The Dropdown Menu, And Press Enter.
A Folder Will Be Opened In Front Of You.
He Opens The Image File In The Folder That Arrange It To Suit Yourself.
After Editing, Switch Back To The Program And Press Any Key.
This Process Is As Much About.
If You Do Not If You Splash Error When The Process Is Complete.the IMG folder will open.
If You Have Occurred, If All You Have To Do Flashlamak Him.
Splash Flashing
You are downloading a program called first QFIL.
Above We Have Done Splash.the purpose of this activity downloaded from the following we're Splash_Flasher_EypCnn.zip take him into.
The files you need and put them where they should as shown in the picture.
Installations After You Turn Off Your Device.
Power Key + Volume Down Key.
The popup screen also connect your USB cable to your phone.
Then Press The Download Button As In The Picture.
Status Will Be Filled With A Line At The Top Of The Script.
Once That Line Is Completed, Your Device Will Reboot.
When you restart the device, your device screen you will see your new Opening.
Splash Flashing Pictures
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download
Lenovo_Vibe_P1_Splash_Maker.zip
Splash_Flasher_EypCnn.zip
Screenshot
Related
This is about installing Stericson's Lock screen along with a custom flash image all at once. This doesn't replace the first splash img that appears- the procedure for doing that is in several tutorials in this forum. This is about choosing a flash image of your liking and replacing the one that is usually tied to the theme or Rom you've installed. Inside the "My Lock" zip is everything that is flashed for Stericsons Lock screen. The only difference is I opened up the framework-res.apk and installed a personal flash image in app/images/ folder. This is where the boot images that zayG1 has posted would go. The second zip "MyBoot.zip" has a picture of mine in one folder, and another folder with an extracted framework.res in it ready for you to mod the boot image in. When you're done, just zip it up into framework-res.apk and copy and paste it into the framework folder that is in the "My Lock" zip. Just make sure you sign the re-zipped MyLock.zip and put it on your sd card and flash it. That's it!
Here is Link to MyBoot.zip
Here is the link to the StericsonLock screen with my boot image
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The one I posted is actually not the whole story- I have the "logo-shine.png" passing from left to right behind it illuminating it.-chris
screenshots??
Boot image screen shot
guiburi said:
screenshots??
Click to expand...
Click to collapse
The one I posted is actually not the whole story- I have the "logo-shine.png" passing from left to right behind it illuminating it.-chris
Didn't know what to put for title so I entered the title randomly. The icon was copied from a forum and edited by me so it can be just the picnic icon with the tongue in a blue background. Credits for the image to the creator.
Here is a preview
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You drag the tongue to the right so you can unlock the phone.
There are some bugs that can't be fixed until I find a way to fix them. Also when the phone is in charge then the "tongue" icon sucks
The lockscreen can be installed with Lock 2.0 (sorry you need to buy it or find the .apk on net) and OI File Manager (free).
1. Download Lock 2.0 (Paid Version) from Market or apk (this is illegal and I don't support it) from a warez site.
2. Run Lock 2.0 and download any lock. Then connect your phone to PC and you will see a folder called "slideunlocker-googlecode-com" and go into "skin" which is inside of it.
3. Download this (DO NOT EXTRACT) and copy it into the "skin" folder.
4. Done , just open Lock 2.0 , install new with OI FileManager and select my zip
5. After selecting it just press one time into the name and you are ready to try it
P.S I bought the program to support the creator and help you with making this lockscreen
Sorry but much problems in my life and can't release it now
Problems is that my little 6y.old brother has a problem on his throat and is at hospital, I must travel back to my mother and have a lot of homework for xmas to do
Sorry again but I will try my best to release it today.
Just another application for unlocking your phone
Right now this is only a simple application and will not work as a screen locker.
If someone knows how to make your own application as a device locker i would appreciate the help. If Someone wants to continue the development of this application i'm glad to supply the source code for free.
This is my first application for a windows mobile device so i hope you like it.
Here are some images of this simple application:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Instructions on how to use this application:
This program should use a file to read the preferences, however i've had some problems with it, so as default there is a combination.
What is the diference between this application and the other fake fingerprint scanners?
Instead of pressing the screen for a determinate number of scans, you need to guess the combination.
What is a combination?
In this program basically you obtain an combination by pressing then leaving and then pressing again.
Everytime the scan bar hits the top of the "box" one of the counters increments, if you press for the correct amount of scans, then one of the numbers at the bottom will be the result and the next starts to increment.ยด
You have about two scans of time to press the screen again, else the program will analyse your combination, returning the message:
access denied or by simply leaving the application.
The default value for the combination at this moment is 5-5 meaning 5 scans stop pressing the screen and then 5 more scans.
If you have any questions post them, as will be glad to answer as soon as possible.
Want to know how to get this phone icon that I have on my home screen?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then follow these instructions below!
1. Go to the Google Play Store and search up QuickShortcutMaker.
2. Install the app.
(Were you expecting a picture here? Ok ok. I already have the app installed, and it's just a hassle to uninstall and reinstall it.)
3. Open the app. Then wait for it to load all of the apps, then select whatever app you want and tap it (This time, we are going to create a shortcut of the "Cellular Data" app, which is the stock phone app).
4. Then, if you want to create the shortcut right away, press "Create" (bottom right of the screen). If you want to try launching it, press "Try". If you want to check out its info, press "App Info". You can also share the app's info by pressing "Share app info". And the "View on Google Play Store" button is self-explanatory.
When you press "Create", the app closes and, viola! The app shortcut is created!
Once you master the art of making shortcuts, you can start baffling many people with your out of place shortcuts, from noobs to devs to your parents and siblings!
I hope your time was well spent reading this!
Sent from my HTC One (duh)
Is there a way to use the "Structure" tool/tab (shown in image below) for the same file opened in another window. Sometimes I will have the same file opened twice, one in the main window and one opened in another window.
I like using the "Structure" tab to quickly get to methods, however, I noticed it only takes me to the method I selected in the file that is docked in the main window even if I'm actively working on that same file in the other window. I want it to take me to the method in the window I'm working in.
Is there somewhere in the settings where I can make it so that it takes me to the method I selected from the "Structure" tool in the current window I'm working on and not the main window every time. Or better yet, can I open another "Structure" toolbox in the other window so I end up having one "Structure" tool in the main window and another one in the other non-main window?
I've tried undocking the "Structure" tool from the main window and moving it off to the side so that it is its own window but no matter what, whenever I select a method, it always updates the file found in the main window.
At the moment, I just set bookmarks all over the file to navigate in a file not in the main window but if I could get the "Structure" tool to work the way I want it too, it would definitely be way more convenient for me.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}