NEM-L21 bricked, bootlooped after trying to go back to 6.0 - Honor 5C Questions & Answers

Dear XDA members,
Maybe someone could help me.
I was using the beta Nougat on my 5C (7lite - NEM-L21) and I decided I would like root. I installed Nougat TWRP and went well then I've encountered problem when installing supersu.zip - data problems, so I googled (damn google specialists) so I wiped system and DATA. I left myself without any operating system. So I managed to instal Lineage 13 for P9lite-Honor 5C.
But no, that was not enough, I tried again to install the beta update + patch for NEM-21... And thats it no more Lineage 13 no more nothing. After that I have installed TWRP through ADB and I could not go into it. So again google - I managed somehow to install original B132 firmware (before it I installed recovery taken out of B132) and it go through installation with success.
Unfortunately that's it - phone stays in the HONOR logo and nothing more - ah yes I did clean to factory through Honor original recovery.
Can ANYONE help me solve my problem, or you think it's a lost cause?:good:

dload method should work.

thelous said:
dload method should work.
Click to expand...
Click to collapse
Unfortunately should work doesn't apply to my case
I will have to send it to Service in Huawei.

If anyone encounters my problem please use method passed by fellow xda member y4c1ne .
1- Extract the update.zip from this thread, u'll find an Update.app. Open it using huawei update extractor, and then extract BOOT.img, RECOVERY.img, SYSTEM.img to adb folder.
2- Boot your phone into bootloader (shut it down, press volume down - then connect it to your computer)
3- Flash the files extracted from UPDATE.APP using these commands
Code:
-fastboot flash boot BOOT.img
-fastboot flash recovery RECOVERY.img
-fastboot flash system SYSTEM.img (this will take some time so be patient).
Again thanks for help: y4c1ne

Related

[FIX]Marshmallow BOOTLOOP

OK people, so i bring another (hopefuly helpful to someone) exprecience with BOOTLOOP.
Problem: I had stock B200 firmware (5.0.2). I wanted to try beta update of marshmallow, so i decided to try it. It was told me i can update directly from B200 one, so i just copied update.zip to DLOAD folder, went to settings and run local update. The phone restarted, booted into recovery and started flashing. BUT, i forgot that i had custom TWRP recovery and not stock one, anyway, TWRP started flashing the zip, error after error, but some files still copied and bricked the phone. I couldnt start any recovery, just fastboot and some mode that should download online file and reflash system, but it would be very easy so it has error too.
Here is what i did:
1. Download the update zip of marshmallow you were trying to flash and unpack UPDATE.APP
2. Extrac: RECOVERY.img and BOOT.img
3. set phone to fastboot mode and flash extracted BOOT.img, then RECOVERY.img
4. after that, you need somehow copy whole B200 firmware into sdcard / dload folder (i took micro sd and inserted into another phone, then copied it)
5. now you can boot into force flashing mode (power + volume up + volume down buttons) and it automaticaly reflash whole system.
6. after reboot you can use your P8
OK, i got it work!
00471 said:
OK, i got it work!
Click to expand...
Click to collapse
Great to hear that, can you please answer how you did it,as this might help someone having the same problem
Salman Al-Badgail said:
Great to hear that, can you please answer how you did it,as this might help someone having the same problem
Click to expand...
Click to collapse
of course, i wanted to do it but didnt have time, ill update OP with solution
00471 said:
of course, i wanted to do it but didnt have time, ill update OP with solution
Click to expand...
Click to collapse
Thanks :good:
00471 said:
OK people, so i bring another (hopefuly helpful to someone) exprecience with BOOTLOOP.
Problem: I had stock B200 firmware (5.0.2). I wanted to try beta update of marshmallow, so i decided to try it. It was told me i can update directly from B200 one, so i just copied update.zip to DLOAD folder, went to settings and run local update. The phone restarted, booted into recovery and started flashing. BUT, i forgot that i had custom TWRP recovery and not stock one, anyway, TWRP started flashing the zip, error after error, but some files still copied and bricked the phone. I couldnt start any recovery, just fastboot and some mode that should download online file and reflash system, but it would be very easy so it has error too.
Here is what i did:
1. Download the update zip of marshmallow you were trying to flash and unpack UPDATE.APP
2. Extrac: RECOVERY.img and BOOT.img
3. set phone to fastboot mode and flash extracted BOOT.img, then RECOVERY.img
4. after that, you need somehow copy whole B200 firmware into sdcard / dload folder (i took micro sd and inserted into another phone, then copied it)
5. now you can boot into force flashing mode (power + volume up + volume down buttons) and it automaticaly reflash whole system.
6. after reboot you can use your P8
Click to expand...
Click to collapse
Tried exactly as you say, STILL Software install failed.
Can you send me link which system you are trying to flash? Maybe you have just bad package
Odoslané z HUAWEI GRA-L09 pomocou Tapatalku
Can't get it to work
00471 said:
OK people, so i bring another (hopefuly helpful to someone) exprecience with BOOTLOOP.
Problem: I had stock B200 firmware (5.0.2). I wanted to try beta update of marshmallow, so i decided to try it. It was told me i can update directly from B200 one, so i just copied update.zip to DLOAD folder, went to settings and run local update. The phone restarted, booted into recovery and started flashing. BUT, i forgot that i had custom TWRP recovery and not stock one, anyway, TWRP started flashing the zip, error after error, but some files still copied and bricked the phone. I couldnt start any recovery, just fastboot and some mode that should download online file and reflash system, but it would be very easy so it has error too.
Here is what i did:
1. Download the update zip of marshmallow you were trying to flash and unpack UPDATE.APP
2. Extrac: RECOVERY.img and BOOT.img
3. set phone to fastboot mode and flash extracted BOOT.img, then RECOVERY.img
4. after that, you need somehow copy whole B200 firmware into sdcard / dload folder (i took micro sd and inserted into another phone, then copied it)
5. now you can boot into force flashing mode (power + volume up + volume down buttons) and it automaticaly reflash whole system.
6. after reboot you can use your P8
Click to expand...
Click to collapse
I did exactly the same mistake as you and the same steps to fix it. I flashed those 2, places the update.app + the other files to dload and then 3 button update and I got to the huawei music and animation. Then it restarted.
mega:///#!IEhCRaRR!GT6Ds9EywDoW5Dd8ZdKVesyQUItbiSwCPaapFhAenEY
is the file I use.
Is there any advice you could give?
T1mb3 said:
I did exactly the same mistake as you and the same steps to fix it. I flashed those 2, places the update.app + the other files to dload and then 3 button update and I got to the huawei music and animation. Then it restarted.
mega:///#!IEhCRaRR!GT6Ds9EywDoW5Dd8ZdKVesyQUItbiSwCPaapFhAenEY
is the file I use.
Is there any advice you could give?
Click to expand...
Click to collapse
Actually i do, i bricked my phone one after that later, and this helped: http://www.huawei-info.de/p8-mm-rollback flash B300 rollback zip with 3 buttons combination, then flash B200 full zip. I hope it will help :good:
00471 said:
Actually i do, i bricked my phone one after that later, and this helped: xx flash B300 rollback zip with 3 buttons combination, then flash B200 full zip. I hope it will help :good:
Click to expand...
Click to collapse
I'll give it a try.
Thank you!
It says Software install failed when trying to flash rollback.. I'll try to install the b200 full zip now
T1mb3 said:
I'll give it a try.
Thank you!
It says Software install failed when trying to flash rollback.. I'll try to install the b200 full zip now
Click to expand...
Click to collapse
okay, do this:
in fastboot flash those files from Marshmallow B313: recovery.img, boot.img and cust.img
then try to flash rollback, the CUST.img is very important to flash
00471 said:
okay, do this:
in fastboot flash those files from Marshmallow B313: recovery.img, boot.img and cust.img
then try to flash rollback, the CUST.img is very important to flash
Click to expand...
Click to collapse
There is no cust in the update.app
T1mb3 said:
There is no cust in the update.app
Click to expand...
Click to collapse
Okay have chaos in this all files, maybe it was B200 cust, or B170 cust, try one of them, but boot.img and recovery.img must be from Beta
00471 said:
Okay have chaos in this all files, maybe it was B200 cust, or B170 cust, try one of them, but boot.img and recovery.img must be from Beta
Click to expand...
Click to collapse
I think I'll get it working as soon as I get a large enough sdcard..
Thanks for your help!
I'll comment here if I face more problems
T1mb3 said:
I think I'll get it working as soon as I get a large enough sdcard..
Thanks for your help!
I'll comment here if I face more problems
Click to expand...
Click to collapse
No problem, let me know if you solve it
00471 said:
No problem, let me know if you solve it
Click to expand...
Click to collapse
Awesome, I got it working.
I used b170 cust, if someone has trouble.
Thank you so much!
T1mb3 said:
Awesome, I got it working.
I used b170 cust, if someone has trouble.
Thank you so much!
Click to expand...
Click to collapse
Glad it worked!
Offtopic: if i root after reverting to 5.0.1 using twrp should i then flash stock recovery from b200 or b313 or which one? I mean when the non beta marshmallow update is available
Qqman55 said:
Offtopic: if i root after reverting to 5.0.1 using twrp should i then flash stock recovery from b200 or b313 or which one? I mean when the non beta marshmallow update is available
Click to expand...
Click to collapse
If you are on 5.0.1 with root and twrp then you are good, or do you want try BETA? if yes then you need stock recovery flash before flashing beta
00471 said:
OK people, so i bring another (hopefuly helpful to someone) exprecience with BOOTLOOP.
Problem: I had stock B200 firmware (5.0.2). I wanted to try beta update of marshmallow, so i decided to try it. It was told me i can update directly from B200 one, so i just copied update.zip to DLOAD folder, went to settings and run local update. The phone restarted, booted into recovery and started flashing. BUT, i forgot that i had custom TWRP recovery and not stock one, anyway, TWRP started flashing the zip, error after error, but some files still copied and bricked the phone. I couldnt start any recovery, just fastboot and some mode that should download online file and reflash system, but it would be very easy so it has error too.
Here is what i did:
1. Download the update zip of marshmallow you were trying to flash and unpack UPDATE.APP
2. Extrac: RECOVERY.img and BOOT.img
3. set phone to fastboot mode and flash extracted BOOT.img, then RECOVERY.img
4. after that, you need somehow copy whole B200 firmware into sdcard / dload folder (i took micro sd and inserted into another phone, then copied it)
5. now you can boot into force flashing mode (power + volume up + volume down buttons) and it automaticaly reflash whole system.
6. after reboot you can use your P8
Click to expand...
Click to collapse
can you upload stock recovery of b313?

PRA-LX1 I want to install stock firmware.

I want to flash my phone with stock firmware, but I cannot find it anywhere.
I am looking for PRA-LX1C738B123.
I own Huawei p8 lite 2017
I wiped my system because I wanted to install other rom, it didn't work so I want to go back to the original.
Unfortunately I wasn't smart enough to do a backup before so I am stuck atm. The bootloader is unlocked and flashing works, I can boot into huawei eRecovery and TWRP. (eRecovery gives the getting package info failed error) I have tried the dload method with other app files, it fails at 5% every time tho.
I tried using Huawei Update Extractor and Firmware Finder but I cannot find the exact firmware.
Could someone help me with installing my firmware? Oh and I am kinda new and it would be nice to get some guides,
Thanks.
I have the same problem but with a different firmware.. now only thing i can do is use dc-phoenix paid software (15$ for 72h of use). I will try that tomorrow as i also can't find exact same firmware it was on my phone.
MobileTechArena said:
I have the same problem but with a different firmware. now only thing i can do is usedc-phoenix paid software (15$ for 72h of use). I will try that tomorrow as i also can't find exact same firmware it was on my phone.
Click to expand...
Click to collapse
Thanks for reply. I will take that into consideration, but from what I see you were looking for PRA-LX1C432B106 and they indeed have the c432 roms there, however they don't seem to have the ones that I have been looking for. They have a list of firmwares online. Anyway good luck.
barnabaXXX said:
Thanks for reply. I will take that into consideration, but from what I see you were looking for PRA-LX1C432B106 and they indeed have the c432 roms there, however they don't seem to have the ones that I have been looking for. They have a list of firmwares online. Anyway good luck.
Click to expand...
Click to collapse
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
MobileTechArena said:
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
Click to expand...
Click to collapse
Thanks for making it clear. Please tell me if it worked or not. Thanks.
barnabaXXX said:
I want to flash my phone with stock firmware, but I cannot find it anywhere.
I am looking for PRA-LX1C738B123.
I own Huawei p8 lite 2017
I wiped my system because I wanted to install other rom, it didn't work so I want to go back to the original.
Unfortunately I wasn't smart enough to do a backup before so I am stuck atm. The bootloader is unlocked and flashing works, I can boot into huawei eRecovery and TWRP. (eRecovery gives the getting package info failed error) I have tried the dload method with other app files, it fails at 5% every time tho.
I tried using Huawei Update Extractor and Firmware Finder but I cannot find the exact firmware.
Could someone help me with installing my firmware? Oh and I am kinda new and it would be nice to get some guides,
Thanks.
Click to expand...
Click to collapse
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
JStrel said:
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
Click to expand...
Click to collapse
Thanks for help! I tried but i dont' have factory reset option. All I have is Shutdown, reboot and "Download leastest version and recovery" and after I click that all it does is wants internet connection. I logged in to my wifi but it didn't work and I ended up with "getting package info failed screen".
barnabaXXX said:
Thanks for help! I tried but i dont' have factory reset option. All I have is Shutdown, reboot and "Download leastest version and recovery" and after I click that all it does is wants internet connection. I logged in to my wifi but it didn't work and I ended up with "getting package info failed screen".
Click to expand...
Click to collapse
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
JStrel said:
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
Click to expand...
Click to collapse
I got rom that allows me to do a factory reset, it's stuck at 99% for like 2 hours now, is it normal? If not what should I do?
barnabaXXX said:
I got rom that allows me to do a factory reset, it's stuck at 99% for like 2 hours now, is it normal? If not what should I do?
Click to expand...
Click to collapse
Unfortunately I can't help you further than what I already posted.
But keep updating in case someone more knowledgeable peeks in.
similar problem....I was fairly good but play store was stuck in pending download....
I did a wipe in TWRP, and ended with a black screen...
I can boot to eRecovery, but it fails.and also to TWRP.
when attached to PC it keeps being seen and unseen as if its stuck in a power on cycle
Any help would be greatly appreciated.
Already Tested
JStrel said:
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
Click to expand...
Click to collapse
Hello did you already test ???
Here is the solution for every PRA-LX1: [http : // www . htcmania . com / showthread . php ? t=1326478] (sorry for the spaces, but I don't have enough posts written to post external links )
Unfortunately, it's from a spanish forum. I didn't found any problem to follow this tutorial, but maybe for someone it could be a little difficult.
Anyway, it works!
MobileTechArena said:
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
Click to expand...
Click to collapse
Where did you find the C432 firmware? I can't succees to find it
Flashing to a completely empty phone via DC phoenix or manual via fastboot still didnt got my device started. Sometimes I end up in the eRecovery and sometimes its just stuck at boot.
I tried different version from the hicloud but none so far did the trick. Maybe someone can point me into the right direction so i can finally rescue this phone?
EDIT:
PRA-LX1C432
Sorry cant link to these files since i don't got 10 posts. Maybe PM ?
Copied the Mega TWRP backup (B100) to SD card
Flashed TWRP via fastboot
Disconnected the USB cable
Boot into TWRP
Restored TWRP backup
Restarted phone into fastboot
OEM unlocked it
Got booted into TWRP since no stock recovery there
Booted into fastboot again
flashed stock recovery
Android started to work!
Tried to update to B164 and failed
Reboot
Now it offered B110 and I tried to update to B110. Success.
Iocere said:
Flashing to a completely empty phone via DC phoenix or manual via fastboot still didnt got my device started. Sometimes I end up in the eRecovery and sometimes its just stuck at boot.
I tried different version from the hicloud but none so far did the trick. Maybe someone can point me into the right direction so i can finally rescue this phone?
EDIT:
PRA-LX1C432
Sorry cant link to these files since i don't got 10 posts. Maybe PM ?
Copied the Mega TWRP backup (B100) to SD card
Flashed TWRP via fastboot
Disconnected the USB cable
Boot into TWRP
Restored TWRP backup
Restarted phone into fastboot
OEM unlocked it
Got booted into TWRP since no stock recovery there
Booted into fastboot again
flashed stock recovery
Android started to work!
Tried to update to B164 and failed
Reboot
Now it offered B110 and I tried to update to B110. Success.
Click to expand...
Click to collapse
Yeah, that's the way! It worked for me too!
juanmemo said:
Yeah, that's the way! It worked for me too!
Click to expand...
Click to collapse
Also i noticed everytime a OTA fails you get the full version offered on next boot. So you should get a full B164 aswell after it failed
JStrel said:
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
Click to expand...
Click to collapse
how can you boot into recovery ? i can only boot into twrp or fastboot & rescue or if i plug the huawei to the pc erecovery ???
---------- Post added at 12:16 AM ---------- Previous post was at 12:13 AM ----------
i have an huawei pra-lx1 c530 it used to boot into pra-lx1c530b111 rooted and twrp but now it doens't boot anymore, i'd like to flash to c530b160 but i can't find the firmware images
tiagoggama said:
Hello did you already test ???
Click to expand...
Click to collapse
Thanks men
I CONFIRM IT WORK PERFECTLY
For the second part go to this link for more detail :
https://boycracked.com/2016/03/14/h...-unbrick-firmware-any-huawei-android-devices/

bricked device with oreo, old unbrick doesnt work

hi guys,
yesterday i installed the oreo beta on my VTR-L29 but then i brickedd it *cry*. unfortunateley the unbrick methods found here in the forum don't work because the oreo update made some changes in the system file structure...
has anyone an idea what to do?
maybe someone can provide me a recovery image for twrp? (one for oreo, otherwise it wont work) so i can give this a try...
after over 10 hours of fiddeling around a found a really easy solution:
most of you know HWOTA helps with this, but the "normal" version wont work after flashing oreo. but this version is flashed via twrp and is still working!
but you will need a oreo compatible twrp, which you can find here
i know the links are to mate 9 software, but since the p10 and mate 9 are nearly identical, it works on the p10 as well
can you post the step by step guide?
i am on oreo 8.0.0.046 and want to flash another version, or downgrade to nougat because few things don't work on this version
i dont know if downgrading works, i just reflashed the latest oreo.
accordingly to the first link it should work, just flash the TWRP from the second link and then follow the instructions from the first link.
johdost said:
i dont know if downgrading works, i just reflashed the latest oreo.
accordingly to the first link it should work, just flash the TWRP from the second link and then follow the instructions from the first link.
Click to expand...
Click to collapse
failed install twrp- error find twrp 3.0.3, and i replaced to oero mate 9 recovery....
EDIT: success - problem was on the computer
johdost said:
i dont know if downgrading works, i just reflashed the latest oreo.
accordingly to the first link it should work, just flash the TWRP from the second link and then follow the instructions from the first link.
Click to expand...
Click to collapse
i did sucsses to install twrp but on the second step, when i press on install on twrp, the phone restart to erocovey and failed to find the files. what am i doing wrong?
i think that i am stuck with that version forever....
if you reboot to erecovery, you have not successfully installed twrp. you have to install it with "fastboot flash recovery_ramdisk <path to twrp>"
johdost said:
if you reboot to erecovery, you have not successfully installed twrp. you have to install it with "fastboot flash recovery_ramdisk <path to twrp>"
Click to expand...
Click to collapse
you misunderstood me.
i do have twrp, i created HWOTA8 folder on sd card, copied hwota8 update zip, MHA_RECOVERY8 No check and the 3 files that i renamed as it said. after that, from twrp i clicked on hwota8 update zip and begin flash, the phone reboot to stock recovery and failed to install - "files don't found".
please help me fegure out what's the problem.
thanks
t.h.i said:
you misunderstood me.
i do have twrp, i created HWOTA8 folder on sd card, copied hwota8 update zip, MHA_RECOVERY8 No check and the 3 files that i renamed as it said. after that, from twrp i clicked on hwota8 update zip and begin flash, the phone reboot to stock recovery and failed to install - "files don't found".
please help me fegure out what's the problem.
thanks
Click to expand...
Click to collapse
EDIT : the process is sucsses, but its the same version.... 8.0.0.046
Bricked, no TWRP access, any ideas?
Hi.
I know this about a P10, I have a P10 Plus (VKY-L29C605), but the process should be similar, I think.
I bricked my phone after succesfully upgrading from B174 to B321 using HWOTA. After which I decided, since I was at it, to flash the Hyperplus Kernel. This led to a bootloop. To fix it I decided to just go ahead and HWOTA B321 all over again and get over it, and would have probably gone just fine, except I decided to rebrand (C605 > C432) while I was doing that, silly (no, stupid) mistake. This led to the brick I am currently expriencing, I have no recovery access, erecovery or TWRP.
So now I am left trying to unbrick the phone. I extracted the UPDATE.APP for both update_all_hw.zip and update.zip using the Huawei Extractor Tool with no difficulty, except unbricking methods ask for boot.img, which I could not find, so I went along without it and flashed: cust.img, recovery_ramdisk.img (using fastboot recovery_ramdisk command for Oreo), and system.img. All of the commands completed succesfully, but no shebang, still bricked and no recovery access. I figure this has to do with the rebrand as the result after executing the command "fastboot getvar vendorcountry" shows the rebrand pulled through (hw/eu 432).
I am currently downloading HWOTA8.zip (3GB worth of download) to see if I can do something it. I am also downloading the L29C432B360 OTA-FULL, since I believe I am not getting any progress becuase I used the updates for L29C605B321.
The kind people at funkyhuawei told me they could fix it with their tool, but I don't have the money for that right now.
I will post updates, but any ideas would be greatly appreciated.
Many of us have posted over this in the last couple of days. Seems like Funky Huawei unbrick tool was the mehtod to get it work for me. You could try that!
or use dc-phoenix for me it worked (= in the moment i try to capture the usb ports kommunikation so i have the tool with the aktual firmware longer for 3 days :silly:
would first give dc a try 20 bucks for 3 days is ok i think (=
johdost said:
hi guys,
yesterday i installed the oreo beta on my VTR-L29 but then i brickedd it *cry*. unfortunateley the unbrick methods found here in the forum don't work because the oreo update made some changes in the system file structure...
has anyone an idea what to do?
maybe someone can provide me a recovery image for twrp? (one for oreo, otherwise it wont work) so i can give this a try...
Click to expand...
Click to collapse
Must download some software for your phone, unzip update.zip, decompile UPDATE.APP to .iso files, (like recovery.iso, system, iso, vendor iso, boot iso) use fastboot and 10 minuts job, I brik my device over 10 thimes, and repair it.
So I was able to get the C432B360 firmware and I flashed it, but no I can't enter recovery mode because the battery is low (red lightning bolt/red led flash). Anybody know how to charge or force recovery mode boot from fastboot?
If anyone needs, can use my DC-Phoenix account, I don`t need it anymore.
Your username is: cesedy
Your password is: dnL4eHEm
Greting
ure3808 said:
Must download some software for your phone, unzip update.zip, decompile UPDATE.APP to .iso files, (like recovery.iso, system, iso, vendor iso, boot iso) use fastboot and 10 minuts job, I brik my device over 10 thimes, and repair it.
Click to expand...
Click to collapse
Greeting,
Can you explain the procedure of how to do it?
Thank you

How many people bricked their phone while Rebranding/OTA and what solutions used ?

How many people bricked specifically hardbricked their phone after 2018-04-16 updates,while OTA or rebranding using any tool and choose which methods you tried to solve.
we need to show how many people we are,and seek for solution or encourage BOX groups to do something for this matter.
Even huawei may help us if they see we are bunch of people.
Edit: Just comment only if you solved the issue with this tool or any other tool that is not mentioned,here we are seeking help.
reza6d said:
How many people bricked specifically hardbricked their phone after 2018-04-16 noxloader updates,while OTA or rebranding using any tool and choose which methods you tried to solve.
we need to show how many people we are,and seek for solution or encourage BOX groups to do something for this matter.
Even huawei may help us if the ysee we are bunch of people.
Click to expand...
Click to collapse
The only versions that will brick (so far anyway) are BLA-L29C636B137 and ALP-L29C636B134 from 16/4, neither is a noxloader version.
Bricks occur when you update/downgrade/rebrand FROM those 2 firmwares.
ante0 said:
The only versions that will brick (so far anyway) are BLA-L29C636B137 and ALP-L29C636B134 from 16/4, neither is a noxloader version.
Bricks occur when you update/downgrade/rebrand FROM those 2 firmwares.
Click to expand...
Click to collapse
maybe i recall wrong but after first time seeing these noxloaders,somethings changed,anyway i edited the post.thanks.
My BLA-L29 is still on the black screen and I can not even revert to DC-Phoenix. After upgrading to 138.
Used funky
mikaole said:
Used funky
Click to expand...
Click to collapse
i think your phone was in fastboot or bootloop,we are talking about hardbrick bro,black screen not even charge led in our devices.
I bricked my Huawei Mate 10 too
Please help.. I also bricked my Huawei Mate 10 ALP-L29C636...
I installed the EMUI 9.0 on my device using the HWOTA8_Mate10 method which was successful. The EMUI 9.0 ROM was from FirmwareFinder: ROM version ALP-L29C636E2R1P8B108-log (9.0.0.108). I didn't have any issues at all but since Huawei Mate 10's EMUI 9.0 is still in Beta, I decided to switch back to the stable EMUI 8.0.
Here's where the problem started... Since I want to downgrade, I went ahead and downloaded the 3 needed files (update.zip, update_all_hw, update_data_public) from FirmwareFinder: ROM version ALP-L29C636B143 (8.0.0.143). I fired up HWOTA8_Mate10 and started the installation process. The first step was to boot to fast boot and then plug the device, after that, the software asked me to unplug the device and press volume+ and power button but the device won't boot to recovery anymore. The device is now stuck at "Your device is booting now..." I tried rebooting the device but it won't work. Tried to go to eRevovery to wipe cache/factory reset but it will go back to "Your device is booting now..." page. I tried reinstalling the recovery.img via fastboot and tried to boot to recovery mode again but it won't work anymore. I believe my device is now soft bricked . I can still boot to fastboot, I even tried fastboot flash system system.img which was successful but the device still won't boot. Please help how to recover my device. I think I went too far and now I don't know how to fix this issue.
Carnage! said:
Please help.. I also bricked my Huawei Mate 10 ALP-L29C636...
I installed the EMUI 9.0 on my device using the HWOTA8_Mate10 method which was successful. The EMUI 9.0 ROM was from FirmwareFinder: ROM version ALP-L29C636E2R1P8B108-log (9.0.0.108). I didn't have any issues at all but since Huawei Mate 10's EMUI 9.0 is still in Beta, I decided to switch back to the stable EMUI 8.0.
Here's where the problem started... Since I want to downgrade, I went ahead and downloaded the 3 needed files (update.zip, update_all_hw, update_data_public) from FirmwareFinder: ROM version ALP-L29C636B143 (8.0.0.143). I fired up HWOTA8_Mate10 and started the installation process. The first step was to boot to fast boot and then plug the device, after that, the software asked me to unplug the device and press volume+ and power button but the device won't boot to recovery anymore. The device is now stuck at "Your device is booting now..." I tried rebooting the device but it won't work. Tried to go to eRevovery to wipe cache/factory reset but it will go back to "Your device is booting now..." page. I tried reinstalling the recovery.img via fastboot and tried to boot to recovery mode again but it won't work anymore. I believe my device is now soft bricked . I can still boot to fastboot, I even tried fastboot flash system system.img which was successful but the device still won't boot. Please help how to recover my device. I think I went too far and now I don't know how to fix this issue.
Click to expand...
Click to collapse
did you tried huawei pc app (hisuite)?
your problem maybe is because magisk, try to install in twrp "magisk uninstaller". or try to install via twrp, recovery_ramdisk.img, kernel.img and ramdisk.img from the last rom of android 8 (extract with huaweiupdateextractor), then install via twrp with hrupdater 0,4 the same update.zip that you extract the kernel.img, recovery and the other img that I told you.
look at the guides of the preocesses that I told you, if you have any question let me know
durc12 said:
did you tried huawei pc app (hisuite)?
your problem maybe is because magisk, try to install in twrp "magisk uninstaller". or try to install via twrp, recovery_ramdisk.img, kernel.img and ramdisk.img from the last rom of android 8 (extract with huaweiupdateextractor), then install via twrp with hrupdater 0,4 the same update.zip that you extract the kernel.img, recovery and the other img that I told you.
look at the guides of the preocesses that I told you, if you have any question let me know
Click to expand...
Click to collapse
Yes, I tried hisuite but it says my device isn't supported. I will try your suggestion and will get back to you if I have questions
Carnage! said:
Yes, I tried hisuite but it says my device isn't supported. I will try your suggestion and will get back to you if I have questions
Click to expand...
Click to collapse
If the update process didn't even started, you need to flash stock Pie kernel, recovery_ramdisk and system, using fastboot.
This should get you back to a working OS.
Pretoriano80 said:
If the update process didn't even started, you need to flash stock Pie kernel, recovery_ramdisk and system, using fastboot.
This should get you back to a working OS.
Click to expand...
Click to collapse
I see. I only tried flashing the recovery_ramdisk and system.img. I will try it later and I will let you know if it worked.
Pretoriano80 said:
If the update process didn't even started, you need to flash stock Pie kernel, recovery_ramdisk and system, using fastboot.
This should get you back to a working OS.
Click to expand...
Click to collapse
as far as I can read, I think he wants to come back to OREO, so he has to install first recovery_ramdisk.img, kernel.img and ramdisk.img from 8.0.0.143 (extracting those files with huaweiextractorupdate) and then flashing those files via fastboot or your twrp version. Then, he has to use hrupdater 0.4 to install 8.0.0.143
Am I right Pretoriano80?
please, fell free to correct me if i have commited any mistake
PD: MANDATORY TO HAVE UNLOCKED BOOTLOADER FOR THE PROCESS
durc12 said:
as far as I can read, I think he wants to come back to OREO, so he has to install first recovery_ramdisk.img, kernel.img and ramdisk.img from 8.0.0.143 (extracting those files with huaweiextractorupdate) and then flashing those files via fastboot or your twrp version. Then, he has to use hrupdater 0.4 to install 8.0.0.143
Am I right Pretoriano80?
please, fell free to correct me if i have commited any mistake
PD: MANDATORY TO HAVE UNLOCKED BOOTLOADER FOR THE PROCESS
Click to expand...
Click to collapse
No, first he has to recover the current OS, and my advise was only for that.
Then he will need to use a TWRP + NoCheck combo, to get back to Oreo.
HuRUpdater can't get you back to Oreo so you guys should stop using that with Pie.
Mate 10 Pro BLA-L09
I also installed the EMUI 9.0 on my device using the HWOTA8 method which was successful. The EMUI 9.0 (9.0.0.108). I didn't have any issues too. After a while I decided to switch back to EMUI 8.0. using also HWOTA8 I put three zip files with EMUI8 (update.zip .....). Update ended with error. That's it.
I only have fastboot working but I am able to flash only few partitions System.img, Recovery_ramdisk.img, Kernel.img. I tried to flash them many times - nothing.
Couple months ago I messed up with my phone and I had to buy and use DC-Phoenix. It worked for me then. This time did not because DC-Phoenix only support EMUI 8. They refunded me money I paid for - that's good thing but my phone is still bricked.
Then I've found MultiTool for Huawei
https://forum.xda-developers.com/honor-8/development/tool-huawei-multi-tool-team-mt-t3523923
It shows that
https://gyazo.com/70820957c6638e27bfe79418dfb07e3e
(Firmware 9.0.0.108,device bla-l09,no serial number, no IMEI and battery status 0)
HiSuite says device is not supported.
Is there any way to force HiSuite to recover not supported device?
Anyone knows the solution?
I booked my phone for repair with Huawei Service.
diowil4 said:
I also installed the EMUI 9.0 on my device using the HWOTA8 method which was successful. The EMUI 9.0 (9.0.0.108). I didn't have any issues too. After a while I decided to switch back to EMUI 8.0. using also HWOTA8 I put three zip files with EMUI8 (update.zip .....). Update ended with error. That's it.
I only have fastboot working but I am able to flash only few partitions System.img, Recovery_ramdisk.img, Kernel.img. I tried to flash them many times - nothing.
Couple months ago I messed up with my phone and I had to buy and use DC-Phoenix. It worked for me then. This time did not because DC-Phoenix only support EMUI 8. They refunded me money I paid for - that's good thing but my phone is still bricked.
Then I've found MultiTool for Huawei
https://forum.xda-developers.com/honor-8/development/tool-huawei-multi-tool-team-mt-t3523923
It shows that
https://gyazo.com/70820957c6638e27bfe79418dfb07e3e
(Firmware 9.0.0.108,device bla-l09,no serial number, no IMEI and battery status 0)
HiSuite says device is not supported.
Is there any way to force HiSuite to recover not supported device?
Anyone knows the solution?
I booked my phone for repair with Huawei Service.
Click to expand...
Click to collapse
It should be possible to recover your phone.Tried to flash Pie B108 recovery_ramdisk, kernel and system with fastboot?
Pretoriano80 said:
It should be possible to recover your phone.Tried to flash Pie B108 recovery_ramdisk, kernel and system with fastboot?
Click to expand...
Click to collapse
I have tried. I flashed Pie 9.0.0.108 - nothing, 9.0.0.112 (chinese ver) - nothing. I tried BLA-L09 8.0.0.148(SP1C432) - nothing.
After flashing recovery_ramdisk, kernel and system of all above firmware there is no change only fastboot is working.
The problem is that downgrade process from Pie to Oreo went to 95% ( I thing - I don't remember exactly but for sure it was 90 something). It could have changed most of partitions to Oreo but left one or few unchanged (like verlist.img, xloadr.img, vendor.img, product.img).
From fastboot I am able to change (flash) only few partitions.
Do you gays know any other tools like dc-phoenix to force to flash all partitions. (Couple months ago when I used DC Phoenix with Emui 8 it used backdoor to flash difficult partitions.)
Example:
Writing XLOADER partition with file X:\Install\Telefony\Huawei_Mate_10_pro\DC_Phoenix_v50\XLOADER.img
XLOADER partition UPDATE ...FAILED
Cannot get FBlock info from device
Activating backdoor: DONE
Writing XLOADER partition with file X:\Install\Telefony\Huawei_Mate_10_pro\DC_Phoenix_v50\XLOADER.img
XLOADER partition UPDATE ...OK
diowil4 said:
I have tried. I flashed Pie 9.0.0.108 - nothing, 9.0.0.112 (chinese ver) - nothing. I tried BLA-L09 8.0.0.148(SP1C432) - nothing.
After flashing recovery_ramdisk, kernel and system of all above firmware there is no change only fastboot is working.
The problem is that downgrade process from Pie to Oreo went to 95% ( I thing - I don't remember exactly but for sure it was 90 something). It could have changed most of partitions to Oreo but left one or few unchanged (like verlist.img, xloadr.img, vendor.img, product.img).
From fastboot I am able to change (flash) only few partitions.
Do you gays know any other tools like dc-phoenix to force to flash all partitions. (Couple months ago when I used DC Phoenix with Emui 8 it used backdoor to flash difficult partitions.)
Example:
Writing XLOADER partition with file X:\Install\Telefony\Huawei_Mate_10_pro\DC_Phoenix_v50\XLOADER.img
XLOADER partition UPDATE ...FAILED
Cannot get FBlock info from device
Activating backdoor: DONE
Writing XLOADER partition with file X:\Install\Telefony\Huawei_Mate_10_pro\DC_Phoenix_v50\XLOADER.img
XLOADER partition UPDATE ...OK
Click to expand...
Click to collapse
I think you should use my TWRP + NoCheck recovery and try to flash the Pie beta again.
Pretoriano80 said:
I think you should use my TWRP + NoCheck recovery and try to flash the Pie beta again.
Click to expand...
Click to collapse
After flashing It cannot boot to recovery.
diowil4 said:
After flashing It cannot boot to recovery.
Click to expand...
Click to collapse
So you can only boot to fastboot, no matter what?
Pretoriano80 said:
So you can only boot to fastboot, no matter what?
Click to expand...
Click to collapse
Yes.

Huawei P9 stuck in rescue mode after install boot.img recovery.img and recovery2.img!

Hi guys,
I've run into a problem with my Huawei P9. I would usually solve any issues, myself. But I find myself completely stuck and don't know what to do, anymore.
I accidentally wiped my entire phone with TWRP. I managed to get the stock ROM update.APP file and installed the boot.img recovery.img and recovery2.img with TWRP. I did it with TWRP because it wouldn't work with fastboot, since the FRP was not unlocked. I tried to unlock it, but whatever I tried, nothing would work. Btw, I couldn't install the system.img in TWRP because TWRP told me the file was too big for installing it in the boot or recovery.
I tried to reboot into bootloader, to try and install the system.img, because I managed to install the other 3 .img files. But then I found that Windows 10 could no longer connect with my phone. Worse, even, I can only reboot into the Huawei eRecovery (which doesn't work to recover my device) or the rescue mode.
In the rescue mode it tells me:
Error!
Func NO : 10 (boot image)
Error NO : 2 (load failed!)
I've searching for many hours and found myself in finding numerous of solutions for related problems, which, unfortunately, don't work for the issue I'm having.
Can someone help me with this!? Thank you! :fingers-crossed:
ledenje said:
Hi guys,
I've run into a problem with my Huawei P9. I would usually solve any issues, myself. But I find myself completely stuck and don't know what to do, anymore.
I accidentally wiped my entire phone with TWRP. I managed to get the stock ROM update.APP file and installed the boot.img recovery.img and recovery2.img with TWRP. I did it with TWRP because it wouldn't work with fastboot, since the FRP was not unlocked. I tried to unlock it, but whatever I tried, nothing would work. Btw, I couldn't install the system.img in TWRP because TWRP told me the file was too big for installing it in the boot or recovery.
I tried to reboot into bootloader, to try and install the system.img, because I managed to install the other 3 .img files. But then I found that Windows 10 could no longer connect with my phone. Worse, even, I can only reboot into the Huawei eRecovery (which doesn't work to recover my device) or the rescue mode.
In the rescue mode it tells me:
Error!
Func NO : 10 (boot image)
Error NO : 2 (load failed!)
I've searching for many hours and found myself in finding numerous of solutions for related problems, which, unfortunately, don't work for the issue I'm having.
Can someone help me with this!? Thank you! :fingers-crossed:
Click to expand...
Click to collapse
No one ?! :crying:
ledenje said:
No one ?! :crying:
Click to expand...
Click to collapse
Can you go to TWRP?What is your phone version and system?
albelushi7 said:
Can you go to TWRP?What is your phone version and system?
Click to expand...
Click to collapse
Sorry for the late reply. Couldn't get myself to check on xda-developers, anymore.
But, no, I can't go to TWRP. Also, Windows 10 doesn't recognize my phone. So fastboot doesn't work, either. Even though I can get my phone into the fastboot&recovery mode. My phone is a Huawei P9 which runs on Android. I literally tried everything, but nothing works.

Categories

Resources