A friend of mine ask me to look at his phone. It's an Huawei P8 lite 2017, original software, not rooted, two months old. It used to work but now it only shows the start up screen with the Huawei logo, so I think it's bootlooping.
I tried to flash a new recovery with Minimal ADB Fastboot but it's not possible because I'm 'not authorized'.
I'm not sure how to fix this problem and where to start. I obviously can't go into the settings of the phone and switch on USB debugging, because it doesn't boot to Android. Is it possible to repair this phone?
thanks in advance
My problem is similar to this tread
https://forum.xda-developers.com/p8...ssion/p8-lite-2017-stuck-boot-screen-t3591451
so I will post in that one
Related
Hi everyone,
I tried to install Marsmallow according to the XDA tutorial and my Mate S is now stucked on Huawei Logo when it boots.
I tried to put another Firmware on my SD in order to downgrade the phone but it did not work. I tried to wipe the data etc with the reset functionality it didn't work neither. Finally I tried to install TWRP or another recovery file that I've extract but I still get the error message "FAILED -(remote: command not allowed)". I guess I should have root my phone before but now it's bricked I can do it
So I'm kind of stucked on this (and a lot disapointed), if anyone has an idea it would be great.
PS : I can't even turn my Mate off now, it always displays Huawei logo and boot until it has no more battery !
Thanks for reading me.
i can tell you a long story from Huawei Mate S but i make it fast.
I flash realy all what i can found for a long Time but Mate S is a big Problem, biggest Problem is when you have a brandet Phone. First i have a Mate S with Provider Branding, that is realy bricked with update to Marshmallow but huawei have change my phone (6 Mounth they do that) and they have give me a brandet free phone and with that i dont have problems with update or brick.
When you now have a Brandet phone, talk with huawei that they change it (24 hours)
When you have a brandet free phone you have a chance that you can debrick it.
Please tell what you have make and what you have for a phone and what for FW you have installed. More input please
Only way what you can do is you download from huawei rollback . Its only for China but it works. When it start then and you update your phone again it will brick for ever !!
good evening,
I have a huawei p9 EVA-L19C605B135 and I had a problem (for some bull**** I did while I was drowsy).
In an attempt to upgrade to nougat I joined this site (http://www.pregunteleamauro.com/cambiar-el-cust-del-p9-eva-l09/) to modify the CUST and only then realized that it was for L09. Sad, ridiculous but it's reality.
I did the process and now it shows to be a L09C605B135. I tried to install another rom by huawei updater, by dload folder and I can not fly to what it was before.
Can someone help me reverse the process? If you can give me the steps for this, I thank you.
debrand your phone or if its booting up
*#*#2846579#*#* find your country build
or vendor
then if you found 605 or C something
find your stock firmware that is
compatible with your vendor and
flash it via key combo
if dload key combo doesn't work
search for DC Phoenix
it might resurrect your device
goodluck
some questions
is your phone booting up to system?
are you able to enter recovery at least?
do you already unlocked your bootloader?
and last post the device detailed status..
Hi everyone, I need your help, I just bricked my CellPhone Huawei P10 Selfie.
BUILD NUMBER: BAC-L03C25B153
MODEL NUMBER: BAC-L03
PRODUCT ID: 26401324
SERIAL NUMBER: 6FCDU17929002623
I was trying to install oreo, I unlocked bootloader with any problem, but when I try to install TWRP it bricked.
When it try to boot it stop in the window that said Your device has been unlocked and can't be trusted to learn mor visit:.... and has a message your device is booting now... after a few minutes it automatic restart.
I can't use the bootloader, because I can't access to USB debuggin, eRecobery doesn't download, and when I try to install from SD Card with dload folder in root directory whith the os downloaded from hear "pro-teammt /firmware-database/ " using the vol+, vol- and on button, it start the process and when it has about 5% stop and return a message: software install failed.
What can I do?
Regards.
The P10 Selfie isn't a P10. This forum is just for the P10 VTR model.
You own a BAC which is completely different to the P10, and I really don't know why Huawei sells this in some regions as a P10 Selfie - it even doesn't look like a P10.
So, wrong forum for you - this is correct.
Jannomag said:
The P10 Selfie isn't a P10. This forum is just for the P10 VTR model.
You own a BAC which is completely different to the P10, and I really don't know why Huawei sells this in some regions as a P10 Selfie - it even doesn't look like a P10.
So, wrong forum for you - this is correct.
Click to expand...
Click to collapse
After see an image of Nova 2 plus I see they are very similar, I'm thinking if they are the same? Well I just unbricked the phone I will start a guide in the form you recommended.
Regards.
Hi guys, I almost lost my hopes, but I try to explain to you my problem.
In december I tried to update (with HWOTA) to Oreo, but my bootloader closed. Because I coudn't find my bootloader code, I tried a lot of methods, like dload ecc, but i made it worst.
Now I can't boot into the system because the phone is freezed to the bootscreen (the one with the Huawei logo and "Android" written on the bottom), and I can go only in fastboot.
I talked also to a DCUnlock moderator and he told me that in this state, with the P9, I also can't get the bootloader code with their tools.
What can I do?
Thank's for you answers, have a good day.
davideb97 said:
Hi guys, I almost lost my hopes, but I try to explain to you my problem.
In december I tried to update (with HWOTA) to Oreo, but my bootloader closed. Because I coudn't find my bootloader code, I tried a lot of methods, like dload ecc, but i made it worst.
Now I can't boot into the system because the phone is freezed to the bootscreen (the one with the Huawei logo and "Android" written on the bottom), and I can go only in fastboot.
I talked also to a DCUnlock moderator and he told me that in this state, with the P9, I also can't get the bootloader code with their tools.
What can I do?
Thank's for you answers, have a good day.
Click to expand...
Click to collapse
Did you ask them for DC Phoenix, to unbrick (and together to unlock Bootloader)
Hi , soft bricked my Huawei Mate 20 lite. Model is SNE-LX1 HW/EU. Did a firmware upgrade to frp unlock Since then get black screen with yellow text saying a new OS has been installed and device reboots in recovery. Reinstalled already different firmware versions via sload SD card upgrade + use fastboot to unlock FRP code. Fastboot unlock command completes successfully and device does automatically a low level format to then come back to "different os installed message. Anyone advice ?
Hi phitilip, I can't help you on the bricked part (yet). I assume you tried to use Huawei Hisuite software to restore the original firmware so you could possible start over?
I recently got my Mate 20 Lite and haven't messed with it too much (yet!). I do have a question for you though. How did you get the bootloader unlocked? The only way I have found is to pay some random person/company for an unlock code. Trying to avoid that. By the way, I'm in the USA and also on SNE-LX1 with a 'global' designation.
djlman said:
Hi phitilip, I can't help you on the bricked part (yet). I assume you tried to use Huawei Hisuite software to restore the original firmware so you could possible start over?
I recently got my Mate 20 Lite and haven't messed with it too much (yet!). I do have a question for you though. How did you get the bootloader unlocked? The only way I have found is to pay some random person/company for an unlock code. Trying to avoid that. By the way, I'm in the USA and also on SNE-LX1 with a 'global' designation.
Click to expand...
Click to collapse
Hi , the unlock code I purchased was for the FRP unlock because I was told would solve my problem and although the code is correct and allows to do a factory reset it will not solve the "you installed a new software ..." message. When looking online I found that I probably installed the wrong region code firmware but tried everything and cannot get the phone to boot normally. Any advise would be very appreciated.
Can you get to recovery or download?
I'm much more familiar with Samsung devices so my frame of reference is there. How did you flash the new rom? What tool? Where did you get the rom from?
Since you can reset to factory, but that still gives you the error, the only way I can think of so far, with the very little experience I have with Huawei devices, is to find two things if you can. First try to find a 3rd party recovery like TWRP or CWM or possibly use the tool you used to flash the ROM. Flash that if possible to the recovery partition. Then find the original factory firmware for your device and region, even if you have to go beck to Android 9. Then from recovery, or the tool you used to flash new rom, flash that. I'll do some research and see if I can find anything you haven't. From my limited searching for my own Mate 20 Lite, there doesn't seem to be much out there. What's your objective in all of this? Are you just looking to root? Did Hisuite play any role in this? The good news is I have the exact same device as you so I can try some things while it's not bricked
https://forum.xda-developers.com/t/...p30-pro-updated-on-03-12-2020.4032143/page-24 (this work is good.)