Database Develop

[KERNEL][E6683] Repacked Kernel for Z5 Dual E6683 | 32.2.A.5.11 | Recovery | DRM fix

Dear Friends,
Here, I present you the repacked kernel for Xperia Z5 Dual E6683. The kernel is ripped from the latest release 32.2.A.5.11 FW. Its just a repacked kernel for Bootloader Unlocked devices. I have added nothing new. Just a stock one with
Sony RIC disabled
DM-Verity disabled
DRM fix added
TWRP Recovery 3.0.2
Latest stable SuperSU 2.78 (Flash latest SuperSu via Recovery)
Busybox (Install Manually)
Xposed framework v87 (Flash through Recovery)
How to:
Just boot into fastboot** and,
Code:
fastboot flash boot boot.img
**Power Off your device-->Press and hold Volume Up and plug USB cable (Blue LED)--> Now device booted into fastboot
For SuperSu and Xposed:
Currently this kernel doesn't include SuperSu, BusyBox and, Xposed framework. But, you can always flash them using Recovery.
The link for the latest SuperSU and Xposed are given below. Download them from there.
I have not included SuperSU. Because, if the SuperSU is updated by the developer means, you just can't update it to a new version from playstore. You can only update it by flashing the kernel again. So, flashing it via recovery will allow you to update it via PlayStore.
Click to expand...
Click to collapse
Downloads:
32.2.A.5.11 Kernel
Latest Stable SuperSU 2.78
Xposed framework v87
Kernel.elf for Developers
I have tested it with E6683 only. I have no Idea about other variants.
I am not responsible for whatever that goes wrong.
Credits:
tobias.waldvogel for his thread to repacking the kernel

[Reserved]

Where is the latest 32.2.A.5.11 FW? My device is only at 32.2.A.0.305

I think there is a new FW being rolled out
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

failed
remote:dtb not found

[ROM][10.0][UNOFFICIAL] Resurrection Remix 8.6.5 | XPERIA 1 II

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Resurrection Remix 8.6.5 For Xperia 1 II Unofficial
About RR
Resurrection Remix the ROM has been based on LineageOS, SlimRoms, Omni and original Remix ROM builds, this creates an awesome
combination of performance, customization, power and the most new features, brought directly to your Device.
Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!
Special thanks to the LineageOS team, Omni team, SlimRoms and of course to all the supporters.
Important Information
WARNING!!
0 . YOU NEED TO FLASH VBMETA AND DTBO BEFORE YOU FLASH IT ! YOU CAN FIND IT IN SJll'S ROM !​1. This ROM has nothing related to ODM images! So you don't need to ask/install anything like that, just follow the instructions.
2. This ROM will never work with any versions of Google Camera (GCam)!
3. You need to flash Stock Android 10 or Lineage OS 17.1 before flashing this ROM.
4. For VoLTE, you need to boot into stock firmware and enable it before flashing this ROM!
5.If you cam from SODP ROMs, you need to go back to official Android 10 firmware, and boot into launcher.
Downloads Links
Resurrection Remix 8.6.5 :Links
It is Unofficial-build: (Upload to MEGA)
Sorry, I don't have AFH account
Google Applications (optional):
OpenGapps: Please Flash Pico or old version of micro Open Gapps.
Flashing and updating
How to flash
Make sure you upgraded to Official Android 10.0 from Sony
Unlock bootloader is necessary
Download latest platform-tools from google
1. Install fastbootd drivers, guidance
2. Put your device into fastboot by volume up key.
3. Enter fastbootd:
Code:
fastboot reboot fastboot
4. Flash Resurrection Remix:
Code:
Code:
fastboot set_active a
fastboot flash:raw boot boot.img
fastboot flash dtbo dtbo.img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot --disable-verity --disable-verification flash vbmeta_system vbmeta_system.img
fastboot erase metadata
fastboot flash system system.img
fastboot flash product product.img
5. If you are first time to flash Resurrection Remix , Wipe the old userdata:
Code:
Code:
[LEFT] fastboot erase userdata
[/LEFT]
6. Root And Xposed:
Use Pixel Experience or Lineage's Recovery to flash Magisk.
If you need Xposed Framework. Maybe you need to flash Edxposed with riru-core in Magisk.
Contributors
Sjll(Make Device Tree)
Shion Kagurazaka. (Builder)
Source Code:
Device Tree (Based on Sjlls works)
Vendor (Also Based on Sjlls works)
Actually, I just use Lineage OS tree.
Issues and reports
Report issues only if you are using the ROM kernel
If an additional mod is installed, make sure it's unrelated, and mention it
Make sure the issue wasn't discussed earlier in the threads
Share a log of the error with CatLog for example
Donation:
If you would like to donate me a cup of tea, you can:
Alipay
Also thanks to:
cramfs28
Sjll
The Resurrection Remix Team
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Beta
Created 2020-12-31
Last Updated 2020-12-31
Screenshot:
​

Thread closed at OP request

Development [Recovery][unofficial] SHRP | TWRP | OrangeFox [P3Q][Snapdragon]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SHRP Recovery, for P3Q (s21 ultra) Snapdragon devices only
Features/Addons
Fast boot up
Multidisabler added as an addon
WETA reboot tile added as and addon
Magisk 23.0 installer and uninstaller
Magisk module manipulation
System and vendor mounting for gsi flashing
TWRP Recovery, for P3Q (s21 ultra) Snapdragon devices only
Features/Addons
Fast boot up
System and vendor mounting for gsi flashing
OrangeFox Recovery, for P3Q (s21 ultra) Snapdragon devices only
Features/Addons
Fast boot up
System and vendor mounting for gsi flashing
Magisk 23.0 installer option
Changelog...
SHRP 3.1-4 + TWRP 3.5.2-2
Kernel streamlined
Boots in 30sec
OrangeFox 1.00
Initial build
Downloads
SkyHawk Downloads
TWRP Downloads
OrangeFox Downloads
Telegram thread
Thanks to - @klabit87 for advice
SHRP Recovery Project - website
TWRP - website
OrangeFox - website
--------------------->
Beer fund
Contributors
Mentalmuso, mentalmuso
Source Code: - Kernel Source
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 3.1-1

Installation
* vbmeta must be disabled prior to installation from a clean or unrooted system
* Flash the TAR via odin, or the IMG via any custom recovery to the recovery partition
* OrangeFox is a flashable zip, and needs to be flashed from an existing custom recovery
--->

SHRP 3.1-3
Boot time drastically reduced to approx 25-30sec
--->

Guys please make this for the EXYNOS as well!!!
EDIT: message was posted twice, don't know how to delete one.

Guys please make this for the EXYNOS as well!!!

I can confirm it works good and boots a lot faster than other recoveries.. it seems normal now plus everything I tested so far in SHRP seems to work as intended.

I have added a version of TWRP as well to the download links in post #1
--->

best recovery on xda!

SHRP 3.1-4 + TWRP 3.5.2-2
Streamlined the kernel for best booting
--->

Any s21+ or s21 testers out there?
--->

@Mentalmuso , you are amazing !!

efebe said:
@Mentalmuso , you are amazing !!
Click to expand...
Click to collapse
is nice booting to recovery in 30sec instead of 2min isnt it lol.. im rockin shrp too.. nice to change it up a bit

will this work on the latest v3 bootloader?

It'll work if your bootloader is unlocked. Doesn't matter what firmware you are on.

Mentalmuso said:
Installation
* vbmeta must be disabled prior to installation from a clean or unrooted system
* Flash the TAR via odin, or the IMG via any custom recovery to the recovery partition
* OrangeFox is a flashable zip, and needs to be flashed from an existing custom recovery
--->
Click to expand...
Click to collapse
You said vbmeta must be disabled prior to installation but there's something that isn't clear enough for me. Does this mean that if my system is already rooted, i can just flash shrp trough odin ? Or it means I must do a clean install before flashing shrp ? Sorry if the question sounds stupid but I'm quite new to Samsung devices.

[ROM][13][AOSP][UNOFFICIAL] riceDroid v10.1 for Redmi Note 7 [LAVENDER]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ricedroid is an operating system based on lineage/crdroid, that aims to provide necessary "ricing" for android while being fast and stable.
Installation :​ Your bootloader needs to be unlocked
First Time Install / Clean Flash
1. Reboot to fastboot mode
2. Download the riceDroid-v10.1-lavender.zip
3. Flash lineage or crdroid recovery.img with the command fastboot flash recovery recovery.img
4. Reboot to recovery
5. Factory reset > Format Data/Cache/System
6. Flash the ROM with apply update > adb sideload and the command adb sideload riceDroid-13.0-XXXXXXXX-lavender-v10.1-AOSP-OFFICIAL.zip
7. (Optional) You can flash Gapps if you want them. MindTheGapps are recommended
8. Reboot system and enjoy !
Update / Dirty Flash
1. Reboot to Lineage Recovery
2. Download the riceDroid-v10.1-lavender.zip
3. Flash the ROM with apply update > adb sideload and the command adb sideload riceDroid-13.0-XXXXXXXX-lavender-v10.1-AOSP-OFFICIAL.zip
4. Reboot to System
​Download here​
What's working :​
Everything (if it's not true - tell me)
Build informations :​
Android OS version: 13
Security patch level: January 2023
Status: Unofficial
Build author: SharkB69y
Build Date: 23/01/2023
Source code: https://github.com/ricedroidOSS
Kernel Source code: https://github.com/SharkBoy69-CS/kernel_xiaomi_lavender
Telegram support group: https://t.me/sharkb69y_lavender
Don't hesitate to contact me if you need any help/have any issue/find any bug

Message when trying to download a file - This file is not public

Aleks270771 said:
Message when trying to download a file - This file is not public
Click to expand...
Click to collapse
I'll fix it rn, sorry. Thanks for reporting it

Aleks270771 said:
Message when trying to download a file - This file is not public
Click to expand...
Click to collapse
Fixed

this rom support magisk?

Hey, yes it does

Official AOSP for Huawei (FIG-LX1) - LeaOS-PHH (android 13 version)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LeaOS is a project which based on AOSP with trebledroid patches.
This build includes settings parameters for Huawei FIG-LX1 (P Smart 2018) as well as several evolutions:
Offline charging
AGPS Supl20
SafetyNet
GCam for kirin
Installation
Download system file : "LeaOS-A13-20230503-iceows-fig.img.xz" (without google apps) or "LeaOS-A13-20230503-iceows-google-fig.img.xz" (google apps version)
Extract img file
Flash system image : fastboot flash system <drag system.img here>
Boot into twrp: power + vol+ while NOT connected to pc
Wipe cache, dalvik/art cache, internal storage
Wipe data
(option) Install DRM patch for EMUI 9.1 to support DRM : 8-Huawei-FixPreav-AB-v1.3-signed.zip
(option) Install single modem patch for multi-sim device : 11-Huawei-MonoSim-AB-v1.1-signed.zip
Reboot to System and setup with android assistant
Enjoy !!!
If system partition is two small to flash img, increase it with this tools :
Huawei Partition Kit - Enlarge system partition
Huawei Partition Kit This kit allows you to enlarge/reduce (2Go->5Go) the system partition on a Huawei kirin 65x, 960 or 970 phone. You can do it from a Huawei android 9 rom, a Lineage 18.1, 19.1, 20, or an AOSP 11,12 or 13. The kit reinstalls...
forum.xda-developers.com
Source Code:
https://github.com/Iceows
ROM OS Version: Android 13.0
ROM Kernel: Stock kernel
ROM Firmware Required: EMUI 9.1
Based On: Google AOSP + TrebleDroid patches
Support Group
Channel update

btw are you French ? I have a french/C432 P Smart 2018 and i bricked it (TWRP backuped it, but the twrp version used was broken and made a weird backup, it brings up ExtractTarFork() Error: 255 when restoring using any TWRP i could find). I haven't found a fix except merging the 2 system.ext4.win000 and 001, system is back but still bootloops. I hope you can help me i would love to use this rom.
I think Version and Vendor are broken for unkown reasons (both 2 weights 0mb) after restoring backup, if you could provide them maybe

Is this going to function with other models like Mate 10?