Huawei p8 lite 2017 pra-lx1 - P8 Lite (2017) Discussion

Hi
I have problem with my phone cant access to fastbootmode
Phone start on error mode not rescue mode
I have installed twrp on phone but now he dont work and all procedure with update via sdcard with dload folder with update.app dont work
I need help
Thks
Envoyé de mon SM-G935F en utilisant Tapatalk

I forget same with volume down and usb cable
Only error mode screen at start with error recovery image
I have update phone with twrp recovery
I think its the problem
Envoyé de mon SM-G935F en utilisant Tapatalk

jmush303 said:
I forget same with volume down and usb cable
Only error mode screen at start with error recovery image
I have update phone with twrp recovery
I think its the problem
Envoyé de mon SM-G935F en utilisant Tapatalk
Click to expand...
Click to collapse
To access bootloader connect your phone to usb and hold the three buttons until the phone vibrates then quickly hold only volume down.
Sent from my PRA-LA1 using Tapatalk

Dont work
I have only error mode screen with this errors:
Funct NO : 11 (recovery image)
Error NO : 2 (load fail)
Some times after many reboot with buttom recovery image change to boot image
Thats all
Thks for help im stuck in error mode
Envoyé de mon SM-G935F en utilisant Tapatalk

jmush303 said:
Dont work
I have only error mode screen with this errors:
Funct NO : 11 (recovery image)
Error NO : 2 (load fail)
Some times after many reboot with buttom recovery image change to boot image
Thats all
Thks for help im stuck in error mode
Envoyé de mon SM-G935F en utilisant Tapatalk
Click to expand...
Click to collapse
Try to make the battery drain and then hold the volume down button and connect it to usb
Sent from my PRA-LA1 using Tapatalk

I already try with battery drain
But read somewhere must be wait for red light when press power buttom
If not i think its dead
Envoyé de mon SM-G935F en utilisant Tapatalk

For red light not lighting
Sorry
Envoyé de mon SM-G935F en utilisant Tapatalk

Flash the boot.img. This goes in the Errormode and then try to reboot.
https://mega.nz/#!dl1mRJqJ!FnCX7hocErMTw32rRhO8EO16Rug6fITQmmyNkh59DwU

Related

Your device has failed verification

Hello, I can't install any updates anymore.
I also get this when I boot the phone (VTR-l29)
"Your device has failed verification and may not work properly"
Hold volume up for 3 secounds for erecovery.
Push power to boot.
Note: The device won't boot if you do not select an option.
Is there any way to fix this? The bootloader is locked now, but unlocked it with fastboot, to recover.
I have this issue as well but for a specific app. Tried changing the date and time which were correct anyway. Contacted the app and they are saying its my phone blocking it but as far as ive checked all the settings that need to be on are on .. so confused. Any help with this would be gratefully appreciated!
I've got the same problem. I tried Firmware Finder and tried to install version 172 (but not the full one).Installation failed and I got this message since.
I tried to download full version but It always says my connection is too instable.
If somebody has a solution, it's welcome !
Envoyé de mon VTR-L29 en utilisant Tapatalk
mega180 said:
I've got the same problem. I tried Firmware Finder and tried to install version 172 (but not the full one).Installation failed and I got this message since.
I tried to download full version but It always says my connection is too instable.
If somebody has a solution, it's welcome !
Envoyé de mon VTR-L29 en utilisant Tapatalk
Click to expand...
Click to collapse
I solved my problem :
It was impossible to download full version so i tried change DNS option on Firmware Finder. I was able to download and install version VTR-L29C185B172 !
Envoyé de mon VTR-L29 en utilisant Tapatalk
3D Fred said:
Hello, I can't install any updates anymore.
I also get this when I boot the phone (VTR-l29)
"Your device has failed verification and may not work properly"
Hold volume up for 3 secounds for erecovery.
Push power to boot.
Note: The device won't boot if you do not select an option.
Is there any way to fix this? The bootloader is locked now, but unlocked it with fastboot, to recover.
Click to expand...
Click to collapse
i have phone RELOCKED and frp LOCK. Bootloader is unlock in fastboot.
cant do anything.
skiswim said:
i have phone RELOCKED and frp LOCK. Bootloader is unlock in fastboot.
cant do anything.
Click to expand...
Click to collapse
Have you tried downloading full firmware of your phone, extracted update.zip and placed the UPDATE.app in a new folder in the sd card named 'dload'.
And then power off, and power on whith holding (power, volume down and up) until force update? that worked for me
if it fails, you can try funkyhuawi's unbrick (last solution)
3D Fred said:
Have you tried downloading full firmware of your phone, extracted update.zip and placed the UPDATE.app in a new folder in the sd card named 'dload'.
And then power off, and power on whith holding (power, volume down and up) until force update? that worked for me
if it fails, you can try funkyhuawi's unbrick (last solution)
Click to expand...
Click to collapse
cant copy firmware at sdcard because is biger than 4gb . FAT32 doesnt supports bigger files than 4gb.
skiswim said:
cant copy firmware at sdcard because is biger than 4gb . FAT32 doesnt supports bigger files than 4gb.
Click to expand...
Click to collapse
try formating to exfat
tryed, but doesnt work.
skiswim said:
tryed, but doesnt work.
Click to expand...
Click to collapse
Did you try with Firmware Finder like I did ?
Envoyé de mon VTR-L29 en utilisant Tapatalk
mega180 said:
Did you try with Firmware Finder like I did ?
Envoyé de mon VTR-L29 en utilisant Tapatalk
Click to expand...
Click to collapse
how you instal firmware, by sd card ?
in what format was sd card- fat32 ? how big was UPDATE.APP ?
skiswim said:
how you instal firmware, by sd card ?
in what format was sd card- fat32 ? how big was UPDATE.APP ?
Click to expand...
Click to collapse
No I installed with Firmware Finder from playstore, and then you go go to your parameters to update system. The update is more than 2GB, and my sd was formatted by the phone.
Envoyé de mon VTR-L29 en utilisant Tapatalk

NEM-L51 blocked in erecovery mode

Hi everyone after rooting my Honor 5c then unroot it each time I power on the phone I enter on Huawei erecovery mode screen. But trying to download and install OTA update I get the error message "Getting package info failed".
In fastboot mode I have noticed that bootloader is relocked and FRP is locked.
Can anyone give me a solution ?
Thanks.
Try dload method.
Envoyé de mon NEM-L22 en utilisant Tapatalk

Touch screen not respond ?

Code:
Help!
I‘ve restarted my Mi 8 and wanted to enter TWRP.
Unfortunately the phone doesn‘t enter TWRP and went into a bootlloop.
I couldn’t shut down the phone completely.
The only thing I could was to enter fastboot mode.
After a few other tries I‘ve reflashed the stable global ROM from Xiaomi homepage.
The phone now reboots correctly and I can see the start screen.
But now the phone doesn’t respond to input.
I can see everything, but I can‘t write anything.
I‘m also not able to shutdown the phone completely.
What should I do now??
Envoyé de mon SM-A510F en utilisant Tapatalk
founy75 said:
Code:
Help!
I‘ve restarted my Mi 8 and wanted to enter TWRP.
Unfortunately the phone doesn‘t enter TWRP and went into a bootlloop.
I couldn’t shut down the phone completely.
The only thing I could was to enter fastboot mode.
After a few other tries I‘ve reflashed the stable global ROM from Xiaomi homepage.
The phone now reboots correctly and I can see the start screen.
But now the phone doesn’t respond to input.
I can see everything, but I can‘t write anything.
I‘m also not able to shutdown the phone completely.
What should I do now??
Envoyé de mon SM-A510F en utilisant Tapatalk
Click to expand...
Click to collapse
I have the same problem, I was on the last xiaomi.eu. I re-lock my bootloader and flash the latest official stable version but it still does not work.
Envoyé de mon SM-A510F en utilisant Tapatalk

Bricked Phone need Help

Hey guys after doing stupid this i ended up with an locked bootloader and and boot loop with (The current image (boot/recovery) have been destroyed and can not boot. Please flash the correct image or contact customer service to fix it. ).
now i can only access to the phone in edl mode
atm im searching for ways to flash a rom in that edl mode but its difficult
so i need ur help guys
whyphyrl said:
Hey guys after doing stupid this i ended up with an locked bootloader and and boot loop with (The current image (boot/recovery) have been destroyed and can not boot. Please flash the correct image or contact customer service to fix it. ).
now i can only access to the phone in edl mode
atm im searching for ways to flash a rom in that edl mode but its difficult
so i need ur help guys
Click to expand...
Click to collapse
it is simple to put the mode in bootloader, then flash the recovery of mauronfrio and from there you install the rom that you are going to put, then start and the mobile will go to you
Enviado desde mi RMX1931 mediante Tapatalk
Sergiocubano1 said:
it is simple to put the mode in bootloader, then flash the recovery of mauronfrio and from there you install the rom that you are going to put, then start and the mobile will go to you
Enviado desde mi RMX1931 mediante Tapatalk
Click to expand...
Click to collapse
no i cant get into any bootloader or fastboot or recovery only thing that works is pressing vol+ and power for some sec then its blackscreen and its shows me connected as Qualcomm HS- USB QDLoader 9008(COM3)
whyphyrl said:
no i cant get into any bootloader or fastboot or recovery only thing that works is pressing vol+ and power for some sec then its blackscreen and its shows me connected as Qualcomm HS- USB QDLoader 9008(COM3)
Click to expand...
Click to collapse
ok that happens you have to leave it about 4 hours without doing anything and then it will work for you alone, it happened to me and looking for I saw that it is like a mistake they have to protect themselves and they are deactivated for a few hours, do not connect it or try to turn it on or anything, set it aside for about four hours and then try
Enviado desde mi RMX1931 mediante Tapatalk
Sergiocubano1 said:
ok that happens you have to leave it about 4 hours without doing anything and then it will work for you alone, it happened to me and looking for I saw that it is like a mistake they have to protect themselves and they are deactivated for a few hours, do not connect it or try to turn it on or anything, set it aside for about four hours and then try
Enviado desde mi RMX1931 mediante Tapatalk
Click to expand...
Click to collapse
Hi
I'm in the same problem, you also blocked the BL and the same thing happened to you? Then leave it for approx. 4 hours and can I enter the FB?
Sergiocubano1 said:
ok that happens you have to leave it about 4 hours without doing anything and then it will work for you alone, it happened to me and looking for I saw that it is like a mistake they have to protect themselves and they are deactivated for a few hours, do not connect it or try to turn it on or anything, set it aside for about four hours and then try
Enviado desde mi RMX1931 mediante Tapatalk
Click to expand...
Click to collapse
sounds very weird to me but ill give it a try
it didn't work for me
Isavar said:
it didn't work for me
Click to expand...
Click to collapse
You have left it almost four hours and then you have tried to turn on and arrange the charging cable, connect it and then press and hold on + vol + to see if it turns you on that way, I already tell you I had scared for almost 5 hours until without anything else property and look for information and it happens in all are blocked and you have to wait a good while, although the computer recognizes you as a device, he doesn't give an image
Enviado desde mi RMX1931 mediante Tapatalk
Sergiocubano1 said:
You have left it almost four hours and then you have tried to turn on and arrange the charging cable, connect it and then press and hold on + vol + to see if it turns you on that way, I already tell you I had scared for almost 5 hours until without anything else property and look for information and it happens in all are blocked and you have to wait a good while, although the computer recognizes you as a device, he doesn't give an image
Enviado desde mi RMX1931 mediante Tapatalk
Click to expand...
Click to collapse
didnt worked for me to
whyphyrl said:
didnt worked for me to
Click to expand...
Click to collapse
Connect the cable and try to light it by pressing the volu + and turning on
Enviado desde mi RMX1931 mediante Tapatalk
Sergiocubano1 said:
Connect the cable and try to light it by pressing the volu + and turning on
Enviado desde mi RMX1931 mediante Tapatalk
Click to expand...
Click to collapse
yeah then im in edl mode or whats it called
whyphyrl said:
yeah then im in edl mode or whats it called
Click to expand...
Click to collapse
Normally it is to enter the recovery, but they say that this is revived
Enviado desde mi RMX1931 mediante Tapatalk
Sergiocubano1 said:
Connect the cable and try to light it by pressing the volu + and turning on
Enviado desde mi RMX1931 mediante Tapatalk
Click to expand...
Click to collapse
not working, do you block BL after remplace original recovery for twrp?
I comment to see if you are in the same case as us
cheers
Isavar said:
not working, do you block BL after remplace original recovery for twrp?
I comment to see if you are in the same case as us
cheers
Click to expand...
Click to collapse
I had the bootloader unlocked but the phone was dead and when I connected it to the computer I recognized it but did not give image or anything
Enviado desde mi RMX1931 mediante Tapatalk
Sergiocubano1 said:
I had the bootloader unlocked but the phone was dead and when I connected it to the computer I recognized it but did not give image or anything
Enviado desde mi RMX1931 mediante Tapatalk
Click to expand...
Click to collapse
yur case its diferent, you should enter in fast mode an re flash room and ready. your case it is not a brick!
Isavar said:
yur case its diferent, you should enter in fast mode an re flash room and ready. your case it is not a brick!
Click to expand...
Click to collapse
Lol I was not allowed to enter anything the phone was dead, or do not understand, the phone was dead for 4 hours without turning on and without anything, although it will connect to the PC appeared on it but the Phone did not turn on or anything
Enviado desde mi RMX1931 mediante Tapatalk
Anyone find a way to unbrick this phone yet?
Hi all It seems that offline charging is broken in Evolution X n others GSI...I had to wait like 8 hours to revive ??
---------- Post added at 11:51 AM ---------- Previous post was at 11:33 AM ----------
Sergiocubano1 said:
Lol I was not allowed to enter anything the phone was dead, or do not understand, the phone was dead for 4 hours without turning on and without anything, although it will connect to the PC appeared on it but the Phone did not turn on or anything
Enviado desde mi RMX1931 mediante Tapatalk
Click to expand...
Click to collapse
Ty bro n u r Cubano from Clan GSM ??
Hi! Did you found any working solution @whyphyrl?
I'm having the same issue, the bootloop on the first screen.
Manage to enter edl mode for a quick time, before it starts to charge again, but I can't find a flash tool.
Hope to hear from someone soon. Thanks! : )
---------- Post added at 09:35 AM ---------- Previous post was at 09:35 AM ----------
Hi! Have you found any working solution @whyphyrl?
I'm having the same issue, the bootloop on the first screen.
Manage to enter edl mode for a quick time, before it starts to charge again, but I can't find a flash tool.
Hope to hear from someone soon. Thanks! : )
I send it to an service center thex fixed it for free now its working

Question Redmi 9t probably hard bricked, need help pls

hello, I recently flashed MIUI 12.0.1 QJQMIXM on my Redmi 9t with Miflash and it said « flash complete » but the phone boot loop when plugged and if I try to boot it when unplugged it boot once and shut down and if I keep pressing the power button it boot loop. When it’s « booting » it shows me a white screen with blue dots (zoom on the photo). The phone is not recognized by my computer. I need help please
noe.trbt said:
hello, I recently flashed MIUI 12.0.1 QJQMIXM on my Redmi 9t with Miflash and it said « flash complete » but the phone boot loop when plugged and if I try to boot it when unplugged it boot once and shut down and if I keep pressing the power button it boot loop. When it’s « booting » it shows me a white screen with blue dots (zoom on the photo). The phone is not recognized by my computer. I need help please
Click to expand...
Click to collapse
You flashed in fastboot mode with unlocked bootloader or.....
mvikrant97 said:
You flashed in fastboot mode with unlocked bootloader or.....
Click to expand...
Click to collapse
yes, I finally put it into edl mode and i can’t flash any rom it keeps saying « cannot receive hello packet »
noe.trbt said:
yes, I finally put it into edl mode and i can’t flash any rom it keeps saying « cannot receive hello packet »
Click to expand...
Click to collapse
It requires auth flashing in edl mode.
I have access to auth flash your phone using a paid software but don't worry I won't charge it for you.
mvikrant97 said:
It requires auth flashing in edl mode.
I have access to auth flash your phone using a paid software but don't worry I won't charge it for you.
View attachment 5937611
Click to expand...
Click to collapse
oh and I have to do what ?
noe.trbt said:
oh and I have to do what ?
Click to expand...
Click to collapse
Download Teamviewer or Anydesk so that I can remotely restore it.
mvikrant97 said:
Download Teamviewer or Anydesk so that I can remotely restore it.
Click to expand...
Click to collapse
okay I downloaded it
noe.trbt said:
okay I downloaded it
Click to expand...
Click to collapse
Hey please use this tool here to flash your device without auth
Xiaomi MiFlash Tool 2023.4.14.0 No Auth EDL Flashing
Xiaomi MiFlash Tool 2023.4.14.0 No Auth EDL Flashing Modified by Zesuga Features: Free auth bypass (EDL Mobile) No need credit balance or activation Free unlock EDL Auth device and flash Only need to boot the device in EDL mode What's new...
forum.xda-developers.com
Same error....
mvikrant97 said:
Hé, veuillez utiliser cet outil ici pour flasher votre appareil sans autorisation
Xiaomi MiFlash Tool 2023.4.14.0 No Auth EDL Flashing
Xiaomi MiFlash Tool 2023.4.14.0 No Auth EDL Flashing Modified by Zesuga Features: Free auth bypass (EDL Mobile) No need credit balance or activation Free unlock EDL Auth device and flash Only need to boot the device in EDL mode What's new...
forum.xda-developers.com
Click to expand...
Click to collapse
Same error.....
mvikrant97 said:
Hé, veuillez utiliser cet outil ici pour flasher votre appareil sans autorisation
Xiaomi MiFlash Tool 2023.4.14.0 No Auth EDL Flashing
Xiaomi MiFlash Tool 2023.4.14.0 No Auth EDL Flashing Modified by Zesuga Features: Free auth bypass (EDL Mobile) No need credit balance or activation Free unlock EDL Auth device and flash Only need to boot the device in EDL mode What's new...
forum.xda-developers.com
Click to expand...
Click to collapse
It gives me this error now..
noe.trbt said:
View attachment 5938291
It gives me this error now..
Click to expand...
Click to collapse
I will help you out tomorrow using unlock tool as I have already used it up to unlock Samsung phones so I cannot use it on other computer for 12 hours from now.
mvikrant97 said:
Je vous aiderai demain en utilisant l'outil de déverrouillage car je l'ai déjà utilisé pour déverrouiller les téléphones Samsung, je ne peux donc pas l'utiliser sur un autre ordinateur pendant 12 heures à partir de mainte
mvikrant97 said:
Je vous aiderai demain en utilisant l'outil de déverrouillage car je l'ai déjà utilisé pour déverrouiller les téléphones Samsung, je ne peux donc pas l'utiliser sur un autre ordinateur pendant 12 heures à partir de maintenant.
Click to expand...
Click to collapse
ok thx tell me when you can
Click to expand...
Click to collapse
Start from here https://forum.xda-developers.com/t/...ote-9-4g-redmi-9t-redmi-9-power-lime.4263061/
- Can I flash an update of region X if I am using a version of region Y?
No, to switch regions you will have to unlock the bootloader and flash the fastboot ROM of the region you want to switch to.
Are you sure that bootloader is unlocked?
You have tried to flash MIUI firmware of all regions ....based on your pics!
diaconu.silviu said:
Start from here https://forum.xda-developers.com/t/...ote-9-4g-redmi-9t-redmi-9-power-lime.4263061/
- Can I flash an update of region X if I am using a version of region Y?
No, to switch regions you will have to unlock the bootloader and flash the fastboot ROM of the region you want to switch to.
Are you sure that bootloader is unlocked?
You have tried to flash MIUI firmware of all regions ....based on your pics!
Click to expand...
Click to collapse
yes the bootloader is unlocked and I tried to reflash international rom, chinese rom and EEA rom its not working it gives me the hello packets error
mvikrant97 said:
I will help you out tomorrow using unlock tool as I have already used it up to unlock Samsung phones so I cannot use it on other computer for 12 hours from now.
Click to expand...
Click to collapse
you can now ?
noe.trbt said:
you can now ?
Click to expand...
Click to collapse
My internet is not working to setup remote connection.
I would request you to wait for 5 more hours.

Categories

Resources