[ROM] LineageOMS Android 7.x Nougat [KLTE] [UNOFFICIAL]
Code:
*** Disclaimer
-- You install these at your own risk! You are responsible for anything that happens from flashing these files to YOUR phone! If your
phone melts into a pile of goo, catches on fire etc. IT IS NOT MY RESPONSIBILTY BUT YOURS!
Introduction
-- These are UNOFFICIAL builds based of Lineage/LineageOMS for klte variants and by NO means is this is all my ROM. 100% credits goes to the entire Lineage Team and the LineageOMS team,all other coders & contributors who contributed to help make these roms as great as they are! This rom fully supports Substratum and Substratum themes!
Click to expand...
Click to collapse
Installation instructions
* Do not dirty flash (if you do, do not report issues, you cannot dirty flash over an existing lineage build)
* First and most important, ALWAYS MAKE A BACKUP!!!
* Reboot to recovery, immediately do a backup!
* Perform a factory reset (wiping data, cache, dalvik cache)(required, no dirty flashing over existing lineage)
* Flash rom
* Flash GAPPS
* Flash root add on (available up top under downloads)
* Reboot system
* Enjoy!
* Please don't expect or ask for nightlies,weeklies etc These builds will come in my free time. If an update brings about an issue i will move to resync as quickly as i can when said issue has been resolved.
Click to expand...
Click to collapse
Downloads
See 2nd post!
Click to expand...
Click to collapse
FAQ
What phones will this support?
At the moment these builds should support KLTE,KLTEDUOS,KLTEDV,KLTEKOR,KLTESPR,KLTEUSC & KLTEVZW
Click to expand...
Click to collapse
Thanks To/Credits
Code:
* And any and all users in this thread who contributed or will contribute to making this ROM as stable as possible!
* Esa Laukkanen aka elelinux
* Lineage Team & LineageOMS team
* Garwynn XDA
* MrTrip
* Thescorpion420
* DevVorteX
* albinoman887
* ktonsez
* Hagertk
How Do I...?
Code:
How do I report an issue? Please use this format -
Device :
baseband:
BL:
Build:
Issue:
* This will make it easy to follow along common issues,which variants and those with updated firmware that dont have the issue one on a older firmware does can attempt to update for resolution.
What if im not on stock kernel?
*I will not be supporting other kernels so if you report an issue add Kernel: to the issue format. Im anxious to know if boeffla has an issues with it over stock myself as thats what i run but its not my priority!
What do I do , In stuck in a boot loop?
*Under the download section up top is a file for substratum removal. This should remove the overlays and recover from most boot loops if they were to occur.
When will you, how long until ?
* Please dont expect or ask for nightlies,weeklies etc These builds will come in my free time. If an update brings about an issue i will move to resync as quickly as i can when said issue has been resolved.
*DO NOT ASK FOR TIME FRAMES! Please keep in mind us developers have lifes and asking or expecting a timeframe is entirely unreasonable. It may take a few minutes to flash and setup but it takes enourmous time and effort to build and maintain!
[B][U][SIZE="5"]Donations[/SIZE][/U][/B]
Id love an ad free xda account =-) It can really eat some resource when xda is open in both windows and a virtual box Ubuntu browser!
[CODE]
[B][U][SIZE="4"][PLAIN]XDA:DevDB Information[/PLAIN][/SIZE][/U][/B]
[SIZE=3][B]LineageOMS, ROM for the Samsung Galaxy S5[/B][/SIZE]
[B][U]Contributors[/U][/B]
[URL="https://forum.xda-developers.com/member.php?u=5341181"]omgbossis21[/URL]
[B]Source Code:[/B] [URL="https://github.com/LineageOMS "]https://github.com/LineageOMS [/URL]
[B]ROM OS Version:[/B] 7.x Nougat
[B]Based On:[/B] Lineage,LineageOMS
[B][U]Version Information[/U][/B]
[B]Status:[/B] Alpha
[B]Created[/B] 2017-07-28
[B]Last Updated[/B] 2017-07-28
Reserved
Download the Rom Here :
https://www.androidfilehost.com/?w=files&flid=201806
Reserved
Screen Shot : (More available by clicking screenshots up top)
Hi, forgive me if I am missing something.
I am running latest LOS nightly and run substratum with no issues so far, at least that I can tell.
Just want to understand what this is providing, and if I am missing something.
Thank you.
Szarko said:
Hi, forgive me if I am missing something.
I am running latest LOS nightly and run substratum with no issues so far, at least that I can tell.
Just want to understand what this is providing, and if I am missing something.
Thank you.
Click to expand...
Click to collapse
While substratum works on lineage your in legacy only mode and many features cant be used or crash. I regularly had to use the substratum removal tool when doing updates on the regular substratum rom then setup my theme again. This provides support for boot animations, sound packs, apply without reboots , fonts, apply & build/update etc. OMS is fully baked into the rom to support each and every feature without issue and without issue while updating.
omgbossis21 said:
While substratum works on lineage your in legacy only mode and many features cant be used or crash. I regularly had to use the substratum removal tool when doing updates on the regular substratum rom then setup my theme again. This provides support for boot animations, sound packs, apply without reboots , fonts, apply & build/update etc. OMS is fully baked into the rom to support each and every feature without issue and without issue while updating.
Click to expand...
Click to collapse
I see, thank you.
I haven't really done much with Substratum besides load my single theme pack that makes things look the way I expect.
So far stability for me has been decent. I usually run an app called 'Twilight' to weak lighting. I notice more crashing when running this combo.
If you are providing these awesome features and the platform to integrate LOS and Substratum correctly, are you planning on opening a PR on LOS repo? Maybe they will merge your good work.
Be well.
It all depends on the popularity of the ROM and rather it stays close to stock as possible or ventures far away. If things take off I'll use polls to let users decide. As far as you mentioning no issues I'm assuming you were using the swift dark or swift black (forget name) that everyone else was? That was the only stable one I found. Many other themes I absolutely loved but it was only a matter of time before a bootloop, odd issues or an update leading to a bootloop then setting the theme up all over again. You also couldn't use fonts or boot animations as well as required reboots to apply the themes. I'm back on my backup now to get the last of my data to switch to lineageOMS full time and continue to work on it. I planned to build it for myself but felt others may appreciate it shared. I've already synced back up to do a new build as well as I need to make a few small changes.
Sent from my SM-G900T using Tapatalk
does wifi calling work
Does Wifi calling work with this rom
rweidner said:
Does Wifi calling work with this rom
Click to expand...
Click to collapse
No but I'm actually trying to find the ROM (I think its Korean variant?) That it does work on. I found one that says volte works so I'm going to try to merge it. If it looks like I can do it you may see bits and pieces of it in future variants. I'm forking sources over now to have a look at their ims manager. I've looked before and seen different carriers use the same imsmanager, I think its going to be more merging and getting the CSC files right. Its not priority though.
For now the ROM is pure vanilla so it does everything lineage official for klte variants do and don't do anything they don't (except full support for substratum).
Sent from my SM-G900T using Tapatalk
New update posted in download link, all sources synced up and I made a change to make bluetooth file transfer act the way cyanogenmod 13 did. You should now be able to transfer all file types including apk files, or maybe bluetooth is completely broke =-)
omgbossis21 said:
New update posted in download link, all sources synced up and I made a change to make bluetooth file transfer act the way cyanogenmod 13 did. You should now be able to transfer all file types including apk files, or maybe bluetooth is completely broke =-)
Click to expand...
Click to collapse
Can you tell me how you do that and is sending of all file types supported again by official LOS?
because currently I use ResurrectionRemix 5.8.3 on my KLTE and Samsung Galaxy Tab S device but there I am not able to send any type of files via BT, allthough it worked in older builds (not all type of files but zip files worked for example).
Many thanks
regards
j1gga84 said:
Can you tell me how you do that and is sending of all file types supported again by official LOS?
because currently I use ResurrectionRemix 5.8.3 on my KLTE and Samsung Galaxy Tab S device but there I am not able to send any type of files via BT, allthough it worked in older builds (not all type of files but zip files worked for example).
Many thanks
regards
Click to expand...
Click to collapse
You should be allowed to send select few files like music on your ROM. I just did a dirty hack to bypass the black filter (not allowed file types). I'm trying to trace back to where we lost the option w the checkbox to send all files but its time consuming and I've only gotten so far. Seems we have the code to support it but lost the GUI part with the option in the 13 to 14 update
Sent from my SM-G900T using Tapatalk
is klte the only device uploaded at the moment? I thought i'd give it a try on my kltespr
eurohunter said:
is klte the only device uploaded at the moment? I thought i'd give it a try on my kltespr
Click to expand...
Click to collapse
If official lineage support so does mine. Kltespr was merged w klte right? I think my first page says it does. You will need to clean flash but I'm may try to make a migration build for dirty flashers like Me. Boeffla runs fine on it, I'm using it.
Sent from my SM-G900T using Tapatalk
omgbossis21 said:
If official lineage support so does mine. Kltespr was merged w klte right? I think my first page says it does. You will need to clean flash but I'm may try to make a migration build for dirty flashers like Me. Boeffla runs fine on it, I'm using it.
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
That's what confused me. kltespr has not been merged in klte in official LOS. So I was wondering if you merged them all in one. Thanks.
eurohunter said:
That's what confused me. kltespr has not been merged in klte in official LOS. So I was wondering if you merged them all in one. Thanks.
Click to expand...
Click to collapse
I thought it was? I was building it unofficial before merge it worked fine. I'll look into it and if need be maybe spin a build.
Sent from my SM-G900T using Tapatalk
omgbossis21 said:
I thought it was? I was building it unofficial before merge it worked fine. I'll look into it and if need be maybe spin a build.
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
Thank you. I was looking at your list, and maybe I am not understanding what type of merging you are referring to, but there are separate builds in the official LOS website for klte, kltespr, klteduos, kltekor, and kltedv. The ones that have been merged into klte from your list are klteusc and kltevzw. And, using my G900P (sprint variant) as an example, as far as I know, I am not supposed to flash a build other than kltespr. This is a list of the devices that continue to have their own separate builds (latest 08/02):
kltespr: https://download.lineageos.org/kltespr
kltekor: https://download.lineageos.org/kltekor
klteduos: https://download.lineageos.org/klteduos
kltedv: https://download.lineageos.org/kltedv
I'll see what I can do tonight about spinng you a build. I was building for kltespr,kltedv,kltevz and another before lineage was official. Pretty sure I can get one going for you sprint guys but I don't know they move CDMA to klte and leave out sprint . locked BL?
Sent from my SM-G900T using Tapatalk
Good work @omgbossis21. Though I'm not a big fan of substratum and themes, it will be nice to see more options for kltexxx devices. As @eurohunter said, I think most of the klte variants need separate builds except kltevzw and klteusc (those are already merged with klte). I don't know exactly about kltespr, klteduos, kltedv etc, but I'm fully sure that the klte build will not boot (instead, directly go to download mode) on my kltekor (due to significantly different device tree as well as a slightly different kernel) unless the users will flash a compatible kltekor stock/custom kernel on the top of the klte ROM. You may probably clarify those things in the op.
Code:
What phones will this support?
At the moment these builds should support KLTE,KLTEDUOS,KLTEDV,KLTEKOR,KLTESPR,KLTEUSC & KLTEVZW
Btw, It will be really great, if you add some simple but useful apps (like OmniSwitch, OmniJaws etc.) to the ROM. You can easily find the sources from RR/crDroid github repos. And if possible, may be pixel like blue accent color. Such simple changes make this ROM really unique. These are just my suggestions. Of-course, all these things are up to your choice and decision. Thanks a lot, anyway, and keep up the good work...
sunilpaulmathew said:
Good work @omgbossis21. Though I'm not a big fan of substratum and themes, it will be nice to see more options for kltexxx devices. As @eurohunter said, I think most of the klte variants need separate builds except kltevzw and klteusc (those are already merged with klte). I don't know exactly about kltespr, klteduos, kltedv etc, but I'm fully sure that the klte build will not boot (instead, directly go to download mode) on my kltekor (due to significantly different device tree as well as a slightly different kernel) unless the users will flash a compatible kltekor stock/custom kernel on the top of the klte ROM. You may probably clarify those things in the op.
Code:
What phones will this support?
At the moment these builds should support KLTE,KLTEDUOS,KLTEDV,KLTEKOR,KLTESPR,KLTEUSC & KLTEVZW
Btw, It will be really great, if you add some simple but useful apps (like OmniSwitch, OmniJaws etc.) to the ROM. You can easily find the sources from RR/crDroid github repos. And if possible, may be pixel like blue accent color. Such simple changes make this ROM really unique. These are just my suggestions. Of-course, all these things are up to your choice and decision. Thanks a lot, anyway, and keep up the good work...
Click to expand...
Click to collapse
Thanks I appreciate that. I originally made it for my wife and as we like the themes but unless you stratmy far from lineage or use what little theme support it has, you can't do much. I considered changing colors but I think its best to leave it up to selected themed especially since you can mix and match them. As far as app I have some plans for that up my sleeve. My isp is still down after getting home from work so I'll have to build a kltesor ROM tomorrow. I'll do one for any other build requested as well, otherwise other variants come in my free time. I'm still curious if my bluetook hack fix worked, may need to update my phone to find out! I'm also all for boeffla kernel and viper audio so as things pick up more and more I'll let users vote via polls. A few cherrypicks on the other ROMs isn't a bad idea either!
Sent from my SM-G900T using Tapatalk
Related
The Nexus Experience ROM...Bringing the Nexus to the Non-Nexus!
Hi everyone...This is my ROM based of CyanogenMod 12. I have added changed and made multiple improvements but it's based of CyanogenMod 12 by @albinoman887. I will be constantly making changes and adding multiple features. This ROM will get quick updates so make sure to always check back here for the latest and greatest. Also note that this is a new ROM just starting out and built from scratch...it has numerous possibilities so comment if you want a specific feature (either from another ROM or a new feature that will be exclusive to this ROM)!
DISCLAIMER
Code:
/*
* Your warranty is now void. Knox 0x1.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Supported Devices:
This ROM is supported by the following klte GSM devices:
kltexx
kltelra
kltetmo
kltecan
klteub
klteacg
kltedv
klte
***THIS ROM WILL NOT BE SUPPORTING CDMA KLTE DEVICE...EVER...SORRY!***
CDMA klte devices include:
kltespr (Sprint)
klteusc (Verizon)
Installation:
***The lastest version TWRP (2.8.1.0) or Philz CWM is recommended.***
NOTE: It is recommended you do a clean install. The instructions below show how to preform a clean install and install this ROM.
1. Download the appropriate ROM version you wish to install
2. Download the appropriate gapps
3. Back up any and all important data.
5. WIPE DALVIK/CACHE/DATA/FACTORY RESET.
6. WIPE SYSTEM.
7. Flash the ROM in recovery.
8. Flash the gapps.
9. WIPE DALVIK/CACHE
10. Reboot Device.
ROM Version Info
ROM Name: Nexus Experience ROM
ROM Version: 1.1
ROM Status: BETA
ROM OTA ID*: nerid002_klte
ROM md5checksum: bee300ec0c3c61d98d71946ea45ab169
*The OTA ID is used with the OTA updater in the ROM. When a update arrives, via OTA, the app will display a update OTA ID. This ID will hep you know which ROM version you are about to download.
WORKING
Service
Text
Data
Call
Audio
WiFi
Google Now
Bluetooth
GPS
MMS
Video playback
Audio playback
Internal/External SDcard mounting
Multiple User Support
Camera
Video recording
IR Blaster
NFC
Complete power menu
NOT WORKING
Adaptive Display
Changing Font Size/Design
You tell me!
ROM Features
Based of CM 12 source
Faster OS
OTA support
Added Int.d
Added libraries
Android 5.0 (and will continue to be updated to the latest version of Android)
Added Super SU
Device wakes when S-View Cover is lifted
Much, much, more
Upcoming Features:
Android 5.0.1
Double-Tap notification panel to sleep
Debloated CM
5 Ghz WiFi Support
Fixing /dev/block error that appears in recovery when flashing (the error makes no difference but still...it's annoying to see)
You tell me...this ROM is just starting and has endless possibilities
Download
Note: All downloads links in the OP post are via MEGA. I do allow other users to post mirrors in the comments below
Latest ROM Release:https://mega.co.nz/#!YtohwToA!ncpFaRh3IjPbsa9L9JiJh-pIRIl_xMmw5eu0Dm7lahY
Gapps:https://s.basketbuild.com/filedl/gapps?dl=gapps-lp-20141109-signed.zip
Previous Versions
Version 1.0:https://mega.co.nz/#!4wBWFaIJ!IqbUK0QiyGoVdBhzVWElHCaucNDEEo7AjEF0-Nzia5w
Gapps:https://s.basketbuild.com/filedl/gapps?dl=gapps-lp-20141109-signed.zip
md5checksum: f7740e16afadd9287d3066a2590416a2
Changelog
Version 1.0 [DEC 13]:
- Initial Release
Version 1.1 [DEC 14]:
- Fix 5 Ghz WiFi issue
- Debloated CM
- Battery life improvements
- Updater-Script tweaks
- Build.prop tweaks
***YOU CAN'T UPDATE TO THIS BUILD VIA THE OTA UPDATER APP...YOU MUST DOWNLOAD IT AND FLASH IT MANUALLY***
Version 1.2 [COMING SOON]:
- Fixing /dev/block error that appears in recovery when flashing
Click to expand...
Click to collapse
Credits:
ROM Maintainer: @Shawn5162
CM Device Maintainer: @albinoman887
CyanogenMod
Donations:
TO DONATE CLICK THE "DONATE TO ME" BUTTON ON THE LEFT SIDE OF THIS POST UNDER MY XDA USERNAME
ALL DONATIONS ARE GREATLY APPRECIATED
Sources:
Device Kernel: N/A (I haven't modified the stock kernel yet, but I will be in the future. Once I do I will post a GitHub link to my sources )
Device Tree:https://github.com/Team-Hydra?query=klte
CyanogenMod Git:https://github.com/CyanogenMod
Reserved by op
first. lol let's see how it runs.
edit. never mind, won't run on sprint. good luck
eloko said:
first. lol let's see how it runs.
edit. never mind, won't run on sprint. good luck
Click to expand...
Click to collapse
Thanks...working on a Sprint Version...might release it if enough people want it I will...Sorry for the inconvenience.
I'll check it out. Download is very slow. About 100kb/s I'll report back in an hour.
might upload to MEGA and leave a MEGA dl mirror
Sent from my XT1064 using XDA Free mobile app
Here is a mirror for you:
http://fs1.androidfilesharing.com/f39cf496399b5142
---------- Post added at 08:43 PM ---------- Previous post was at 08:43 PM ----------
androidfilesharing said:
Here is a mirror for you:
http://fs1.androidfilesharing.com/f39cf496399b5142
Click to expand...
Click to collapse
Working great too BTW!
Great
Sent from my XT1064 using XDA Free mobile app
putting in my request for klteSPR !!!!! THERE IS NO LOVE HERE IN THE GS5 FORUM FOR KLTE SPR . I am still in the beginning fase of learning how to compile and cook my own rom my experience on this gs5 forum has made me have to pick up the learning curve cause there is like no fun out there for klte spr i sit back and look through the forum and admire with great jealousy looking at all the great roms for a phone that i have in my hand but cant touch them was using bliss but now they have moved to 5.0 and are not suporting kltspr, the same with fusion and liquid was using them also now they are not supporting either
one more time ,,,,,,PLEASE SUPPORT KLTESPR ,i have seen post on other forums asking the same there is a very big segment of kltespr users that you would most likely make faithful followers ,they just need somewhere to go
THANKZ IN ADVANCE!!!!
SPRDAGOD8
(THE HOOD HACK.)
What is Adaptive Display?
seriallife said:
What is Adaptive Display?
Click to expand...
Click to collapse
When phone or tablet backlight changes due to the lighting your in. It adapts to the lighting.
jasonm253 said:
When phone or tablet backlight changes due to the lighting your in. It adapts to the lighting.
Click to expand...
Click to collapse
Thanks for helping explain it @jasonm253...I appreciate it
nice rom thanks @Shawn5162
Tried Flashing - did clean flash - NO EXT SD Card - any suggestions? I have flashed other CM 12 roms and didn't have an issue with SD Card - is there something else I need to do ? Or should I reflash?
sprdagod88 said:
putting in my request for klteSPR !!!!! THERE IS NO LOVE HERE IN THE GS5 FORUM FOR KLTE SPR . I am still in the beginning fase of learning how to compile and cook my own rom my experience on this gs5 forum has made me have to pick up the learning curve cause there is like no fun out there for klte spr i sit back and look through the forum and admire with great jealousy looking at all the great roms for a phone that i have in my hand but cant touch them was using bliss but now they have moved to 5.0 and are not suporting kltspr, the same with fusion and liquid was using them also now they are not supporting either
one more time ,,,,,,PLEASE SUPPORT KLTESPR ,i have seen post on other forums asking the same there is a very big segment of kltespr users that you would most likely make faithful followers ,they just need somewhere to go
THANKZ IN ADVANCE!!!!
SPRDAGOD8
(THE HOOD HACK.)
Click to expand...
Click to collapse
I second this post.
Firstly I want to thanks the dev for the rom and hope will bring and fix to reach the stability and all the nexus goods. .. :good:
Boring........CDMA PLZZZ..,... PARTICULARLY usc no one ever shows us some love man.
@Shawn5162 do i need to be on a particular/latest bootloader? will an older one do?
shohag2018 said:
@Shawn5162 do i need to be on a particular/latest bootloader? will an older one do?
Click to expand...
Click to collapse
U should be on kk Bootloader
Sent from my XT1064 using XDA Free mobile app
Shawn5162 said:
U should be on kk Bootloader
Sent from my XT1064 using XDA Free mobile app
Click to expand...
Click to collapse
ok thanks
Hello,
Some of you may know me from the Mako forums as I built the temasek ROM (cm11) in the past. I am not a person to make elaborate OPs, so it will be simple.
First off, I would like to thank:
temasek
temasek's contributors
CyanogenMod
crpalmer
cristianomatos and his crdroid team
whoever else that contributed to the source code for temasek
@mrapp helping in testing cm12.1 ROM
This ROM is based off of cm12 with added customization and enhancements to temasek's and my liking. I will not be building every day, and I will upload ROMs as I feel. It will take longer for me to build since I will be using an older laptop to do the work. I need my newer one for other purposes. However, if a quick build with fixes need to be added, I will use my newer laptop for a speedy build. If there are bugs or problems, please let me know and do not complain about it since I am only sharing what I am building. However, I will do my best to get it fixed and as time permits.
source: https://github.com/temasek?tab=repositories
link: https://www.androidfilehost.com/?w=files&flid=26938
GApps for 5.1: http://d-h.st/users/dhacker29/?fld_id=27426
To flash this ROM, you all know what to do. Flash ROM, gapps, etc. I am also not responsible for any damage that you may incur on your phone. Flash wisely and responsibly.
You may be able to dirty flash if coming from the official cm12 ROM or any cm12 based ROM. Backup is advised
Enjoy
P.S. If you would like to donate, please donate to temasek. I do not accept donations because I do this for fun and for myself. Don't spend on me, save your money
extras:
Since AudioFX doesn't really work, you can use DSPManager that is modded to work with the ROM (Equalizer visualizer breaks however): https://www.androidfilehost.com/?fid=95916177934540373
Here are different files that make AudioFX work: https://www.androidfilehost.com/?fid=23991606952592281
Also, if you want Nexus 6 ui sounds, you can flash that as well: https://www.androidfilehost.com/?fid=95916177934540374
From the 4/17 build and on, it now can use Google's version of Webview. You should download Google's version of webview from the play store https://play.google.com/store/apps/details?id=com.google.android.webview. Sign up for beta versions here: https://plus.google.com/communities/105434725573080290360. Google's webview will be more up to date with fixes, security enhancements, and features
Thanks bro!
I loved Temasek's ROM for my Galaxy SIII. Glad to see you are bringing the goodies for our beloved Moto X. Much appreciated.
0.0 said:
Hello,
Some of you may know me from the Mako forums as I built the temasek ROM (cm11) in the past. I am not a person to make elaborate OPs, so it will be simple.
First off, I would like to thank:
temasek
temasek's contributors
CyanogenMod
crpalmer
cristianomatos and his crdroid team
whoever else that contributed to the source code for temasek
This ROM is based off of cm12 with added customization and enhancements to temasek's and my liking. I will not be building every day, and I will upload ROMs as I feel. It will take longer for me to build since I will be using an older laptop to do the work. I need my newer one for other purposes. However, if a quick build with fixes need to be added, I will use my newer laptop for a speedy build. If there are bugs or problems, please let me know and do not complain about it since I am only sharing what I am building. However, I will do my best to get it fixed and as time permits.
source: https://github.com/temasek?tab=repositories
link: https://www.androidfilehost.com/?w=files&flid=26938
To flash this ROM, you all know what to do. Flash ROM, gapps, etc. I am also not responsible for any damage that you may incur on your phone. Flash wisely and responsibly.
Enjoy
extras:
Since AudioFX doesn't really work, you can use DSPManager that is modded to work with the ROM: https://www.androidfilehost.com/?fid=95916177934540373
Also, if you want Nexus 6 ui sounds, you can flash that as well: https://www.androidfilehost.com/?fid=95916177934540374
Click to expand...
Click to collapse
screenshot please!
I want to see the settings menu
Tayrom said:
screenshot please!
I want to see the settings menu
Click to expand...
Click to collapse
Check the first post. I added a couple of screenshots of the settings menus
edit: I had to attach the screenshots since it would not load anymore :/
New build is up
sent from my Nexus 7
You will post a changelog? Or do you just implement the changes of CM12?
I implement code from temasek's github and some cherry picks from CM
Sorry mate....any news about 5.1?Tnx a lot for your rom!!!!
Flamehell said:
Sorry mate....any news about 5.1?Tnx a lot for your rom!!!!
Click to expand...
Click to collapse
CM is working on it. When they merge it, then it can be looked at
sent from my Moto X Pure Edition
New build is up! There is a disclaimer: I took out the feature of linking the ringer and notification volume since it did not work. That being said, I am hoping that while doing so it did not break anything else. Please let me know if there are any bugs, typos, and/or mismatches and I will try to fix it (no guarantee). You can view this build as more of a test type, and if nothing bad happens, then it will make me (and you all) happy
Other changes are device specific things and some CM stuff. Enjoy
Edit: I am using a build that I've compiled that's a bit older than the uploaded one with the feature reverted. I haven't seen an issue, but perhaps it'll be different for some of you
New build is up! There aren't many changes since CM has been somewhat slowing down for now (hoping 5.1 is soon). I did remove the notification volume step since Ringer volume is tied with Notification volume. Some bug fixes, more blobs, and more kernel changes were added
New build is available. Only fixes and enhancements were added
sent from my Nexus 7
new build. 4k recording is now back (I was able to select that option in Google Camera)
New build is ready to download. Not a lot was added, only keeping up to date with CM
Thank you sir
Sent from my victara using XDA mobile app
Thanks man....:good:
New build. Not many changes. Only keeping up with CM, but please flash this if you flashed the previous build. It fixes the no voice during a call
sent from my Moto X Pure Edition
0.0 said:
New build. Not many changes. Only keeping up with CM, but please flash this. It fixes the no voice during a call
sent from my Moto X Pure Edition
Click to expand...
Click to collapse
Good News,
I'm Just waiting to get CM12.1 and reflash this, right now I'm playing with android 5.1
[ROM] CyanogenMod 13.0 Android 6.0.1 Marshmallow [KLTESPR/KLTEDV] [UNOFFICIAL] [Nightlies]
Code:
*** Disclamer
-- You install these at your own risk! You are responsible for anything that happens from flashing these files to YOUR phone! If your
phone melts into a pile of goo, catches on fire etc. IT IS NOT MY RESPONSIBILTY BUT YOURS!
Introduction
-- These are UNOFFICIAL builds based of CM-13.0 for kltespr (CDMA) variant and KLTEDV . By NO means this is my ROM. 100% credits goes to
TeamDouche, and all other coders who contributed to CyanogenMod.
I noticed that alot of sprint users were anxious about not having any updates in awhile and figured I could do this for them. I
understand alot of people prefer pure cyanogenmod (like myself), especially given the support of some very nice kernels which often dont
work on other cyanogenmod based, but modified roms. Ive been doing my own nightlies for my klte varient and figured it wouldnt hurt to
help a few others out who arent getting the updates like fingerprints etc!!!!
Click to expand...
Click to collapse
Installation instructions
* Find your variant latest firmware and flash it (bootloader,radio baseband etc)
* Do not dirty flash (if you do, do not report issues)
* First and most important, ALWAYS MAKE A BACKUP!!!
* Reboot to recovery, immediately do a backup!
* Perform a factory reset (wiping data, cache, dalvik cache)
* Flash rom
* Flash GAPPS
* Reboot system
* Enjoy!
Click to expand...
Click to collapse
Downloads
See 2nd post!
Click to expand...
Click to collapse
FAQ
What Phone does this support?
At the moment these builds are only for the sprint version (cdma) of the samsung s5! I may add other variants of klte in the near future!
*Added KLTEDV
When will I get a new build?
I don't know and please don't ask for etas. As I stated I do this in my spare time but will do my best to keep up and at least make sure you guys are getting updated nightlies upon any of the more important, larger updates!
Click to expand...
Click to collapse
Thanks To/Credits
Code:
* And any and all users in this thread who contributed or will contribute to making this ROM as stable as possible!
* Esa Laukkanen aka elelinux
* Cyanogen Inc & Team-Kang
* Garwynn XDA
* MrTrip
* Thescorpion420
* DevVorteX
* albinoman887
* ktonsez
*haggertk for all his hard work on the KLTEVZW variant, wouldn't be up without him!
Donations
Code:
I do this in between a busy life schedule in my free time! My girls paypal address is [email protected] (we share) and is also in my
xda profile. Any donations are very much appreciated but not necessary!
Downloads
ALL S5 VARIANTS VIA MY ANDROID FILE HOST ACCOUNT:
https://www.androidfilehost.com/?a=show&w=files&flid=53418
Click to expand...
Click to collapse
KLTESPR LATEST:
https://www.androidfilehost.com/?fid=4996500813288309125
Click to expand...
Click to collapse
KLTEDV LATEST:
https://www.androidfilehost.com/?fid=4996503000517181572
Click to expand...
Click to collapse
KLTEVZW:
https://www.androidfilehost.com/?fid=24459283995315487
Haggertk is taking over as maintainer so I wont host another vzw build as theirs no point in two of the same builds. Please see his thread for further development.
Click to expand...
Click to collapse
Gapps:
Open gapps nano package seems to be the most popular but any open gapps should work.
Click to expand...
Click to collapse
Bugs
Flashlight bug
???
Click to expand...
Click to collapse
*Reporting Bugs :
Please do so with this format : variant, firmware version, gapps used. Please don't report bugs on dirty flashes or non stock kernels.
Click to expand...
Click to collapse
Thanks,following, seems their is an issue with the 28th build,link for 25thBuild?
Drops77 said:
Thanks,following, seems their is an issue with the 28th build,link for 25thBuild?
Click to expand...
Click to collapse
I've only posted the build in the second post. Seems the person speaking of another build was regarding a different variant. My androidfilehost account has been approved so I should have a updated build soon. A lot of people were using this build although one person had issues with play store services from gapps. As far as I know open gapps is recommend but I do not own device to test so when everyone lets me know which works I'll share it in first post.
omgbossis21 said:
I've only posted the build in the second post. Seems the person speaking of another build was regarding a different variant. My androidfilehost account has been approved so I should have a updated build soon. A lot of people were using this build although one person had issues with play store services from gapps. As far as I know open gapps is recommend but I do not own device to test so when everyone lets me know which works I'll share it in first post.
Click to expand...
Click to collapse
got it thanks
I tried flashing the rom but I am unable to finish setup due to Google Play Store stopping. I saw in the other thread that you were having issues compiling newer builds, Would it be possible for you to do an older one (0325 specifically?)
FYI I dirty flashed over 0216 and it was working fine but I could not get the fingerprint reader to work. I tried a completely clean install (initially with the 1227 gapps from the other thread, OpenGApps stock, micro, nano, and pico) and ran into the Play Store has stopped issue. The initial CM setup gets just past "Enable WiFi" and it tries to check for app updates and will not go further.
My understanding as of now is that all the variant recent nightlies broke gapps and has now been fixed. There's a recent commit regarding sprint that I believe is breaking the build . I haven't had enough time to look into it but will continue to try sync & builds. As far as dirty flash w no fingerprints, I dirty flashed and mine didn't work either. I went to settings, apps and cleared cache on each app, rebooted and its ran fine since. The app cache doesn't get wiped in the clear cache & dalvik steps, its not stored on the cache partition. I tend to do it manually every dirty flash. I'm watching to see if the commit is flagged or reverted due to breaking other sprint builds.
Sent from my SM-G900T using Tapatalk
Also thanks for letting me know it gets stuck at app updates on setup. The sprint commit regarded the radio ril files, perhaps it simply can't connect.
Sent from my SM-G900T using Tapatalk
omgbossis21 said:
Also thanks for letting me know it gets stuck at app updates on setup. The sprint commit regarded the radio ril files, perhaps it simply can't connect.
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
Which app caches did you clear for it to start working? I set it up under lock screen. When I try to unlock I get one "Not Recognized!" error then it just fails to work (swipe just makes the lockscreen bounce) until I unlock and relock.
I am not super worried about the fingerprint reader so no matter either way. Thanks for everything! Feel free to let me know if you need any more information/testing.
I'm syncing sources now to attempt to compile again tonight, hope it works! I basically just go down the list and clear cache to most system items & apps I use frequently.
Sent from my SM-G900T using Tapatalk
omgbossis21 said:
I'm syncing sources now to attempt to compile again tonight, hope it works! I basically just go down the list and clear cache to most system items & apps I use frequently.
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
There is a function in Titanium backup to clear cache for all user and system apps. I have not used it for any MM roms, but have had good luck with it in the past.
Thanks, I actually found that and tried it but it didn't help.
Well the latest sources build failed again. I'm not sure they host previous dated sources either. I'm just leaving a funeral now but I'll try to take a look at commits from the 26th build that was fine til the 28th I believe was the next one I tried that broke. I'll attempt the build again and review the errors. If I can find it I'll build WO that commit.
Sent from my SM-G900T using Tapatalk
New build up, please see second post. Let me know which gapps everyone goes with but i think opengapps is idea, I usually use the pico on my klte. I'll link the gapps in the 2nd post when we decide which one works best.
omgbossis21 said:
New build up, please see second post. Let me know which gapps everyone goes with but i think opengapps is idea, I usually use the pico on my klte. I'll link the gapps in the 2nd post when we decide which one works best.
Click to expand...
Click to collapse
Works perfectly with Open GApps micro, sent a small donation much appreciated for the Sprint builds. It's becoming tougher to find a vanilla build of CM13 for Sprint.
Transaction ID
0M056957MJ4576917
Works great with BaNkS Dynamic GApps
https://www.androidfilehost.com/?w=files&flid=41020
Thanks for continuing support for this device, I sure appreciate it.
Glad to hear its working well for everyone and thank you so much for the donations! I'll use any donations to go toward adding some more ram to my system! I use my PC as a media center and a virtual box in windows 10 with everything else running chews up some resources! I do not own the device so I can't really take the "maintainer" status. I will however ensure you updates from time to time just not a everyday thing. I'm going to look into a few other klte variants as well and may add them to this thread.
Sent from my SM-G900T using Tapatalk
Flashed the latest build with opengapps pico. Everything seems to be working fine except for a flashlight bug when toggled forces a restart and bootloop. Other than that, thank you dev! Your're the real deal.
I thought the flashlight issue had been fixed. It is getting harder to get an updated build, issue also the maintainers team,which they done great job,just not that active/up to date recently. Which sux..
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
Introduction:
A friend of mine (Fusionalex) and me were very unsatisfied with the current state of custom ROM development for this - at least concerning the hardware - great device. The maintainer of the official LineageOS has done nothing for months. Fixes for basic issues and features (see our features below) haven't been implemented although the source has been available for years now. For us, switching to one of the numerous bloated Lineage forks (which at least fixed some issues, but brought other unnecessary problems) was no reasonable option. Apart from all the bloat, many of them don't get regular updates anymore, even though major security issues like KRACK or Blueborne have already been fixed in the official Lineage source. There are some great builds out there like CM 13.0 by MrColdbird or 14.1 by OrdenKrieger (from which we took most of the code for the major fixes, a big thank you goes out to you).
So which ROM did we choose? An up-to-date official LineageOS, but extremely bugged? Or a fixed, but incredibly bloated and mostly unstable custom ROM without the latest security patches? We chose to create our own Lineage experience, as close to the official as possible, but with most of the big issues fixed and up to date.
We will continue to update this ROM until LineageOS 15 by OrdenKrieger is stable enough to use as daily drivers.
Click to expand...
Click to collapse
Features:
U-Touch
Headset buttons and headset hook working, especially with Xiaomi headsets
Ambient Display
GLONASS
OTA updates
some customizations to update the user interface, because apparently Google refuses to push its new design in the AOSP source
We are investigating/working on the some more things, just follow our changelog below!
Click to expand...
Click to collapse
Screenshots:
The UI is close to official LineageOS, you can take a look at the changes in the screenshots section.
Click to expand...
Click to collapse
Installation instructions:
Files you need:
TWRP 3.0.0 by eagleeyetom
TWRP 3.2.1.-0 by ShubhamB
ZUI 2.5.358ST firmware
latest version of our ROM (always on top of the linked list)
(optional) OpenGApps ARM 7.1 (recommended version is Aroma)
You can switch from official LineageOS to our ROM by flashing this small zip, which removes the signature check and then our ROM. Do not flash GApps again, this is only possible on a freshly installed ROM! If you want to go back to official, you need to flash this file.
Steps to install:
unlock bootloader
flash TWRP 3.0.0 using fastboot (v3.0.0 is currently the only version with Aroma support, which we need later on)
if you get this error message, you can ignore it: E: unknown command [log] - this happens because the old TWRP version you need to use doesn't support certain logging commands used in updater scripts, this does not affect the integrity of your installation
flash ZUI 2.5.358ST (this flashes the latest available official firmware)
wipe system, cache, data and Dalvik cache
flash our ROM
(optional) flash OpenGApps, you can use Aroma installer (the interface is bugged, but usable and the phone doesn't crash thanks to the TWRP we are using)
flash updated TWRP 3.2.1-0 (has more features and is more up-to-date, Aroma isn't supported, but you don't need that anymore now)
Click to expand...
Click to collapse
Changelog:
see first post below
Click to expand...
Click to collapse
Downloads:
Download the latest version of our ROM here (always on top of the linked list).
Click to expand...
Click to collapse
Sources:
https://github.com/DaBozzz
Click to expand...
Click to collapse
Bug reports:
Please do not report non-functional fingerprint sensors. You need to flash the ZUI firmware before, as it includes the updated fingerprint sensor drivers. Take a look at the instructions above please.
Feel free to report any other bugs!
Click to expand...
Click to collapse
Thanks to:
LineageOS team, for maintaining our beloved OS
ashwin007, for maintaining our device (in the past?)
OrdenKrieger, for being the reason why this device is still alive
MrColdbird, for investigating all the big issues
Click to expand...
Click to collapse
If you want to support the most important developer for the Z 1, consider donating to OrdenKrieger, his PayPal donation mail address is [email protected].
XDA:DevDB Information
Unofficial LineageOS 14.1, ROM for the Lenovo Zuk Z1
Contributors
Da Bozz, Fusionalex
Source Code: https://github.com/DaBozzz
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: ZUI 2.5.358ST firmware
Based On: LineageOS
Version Information
Status: Beta
Current Beta Version: 20171126
Beta Release Date: 2017-11-26
Created 2017-11-22
Last Updated 2017-12-23
Announcements
Changelog:
All builds contain the latest LineageOS changes.
Code:
20171126: some UI changes, Ambient display
[LIST]
[*][changed] settings icon updated, to apply this change you have to delete the icon database of your launcher: navigate to [I]/data/data/[Launcher Bundle-ID/Package Name]/databases/[/I], delete [I]app_icons.db[/I] and restart your launcher
[*][changed] updater accent color updated to match recent changes
[*][new] Ambient Display
[*][new] Toast message icons
[/LIST]
20171123: some UI changes
[LIST]
[*][changed] blue accent color
[*][changed] documents icon updated, to apply this change you have to delete the icon database of your launcher: navigate to [I]/data/data/[Launcher Bundle-ID/Package Name]/databases/[/I] and delete [I]app_icons.db[/I] and restart your launcher
[/LIST]
20171122: initial release
[LIST]
[*][new] U-Touch
[*][fixed] headset buttons and headset hook working, especially with Xiaomi headsets
[*][new] GLONASS enabled
[*][changed] custom OTA updates
[*][changed] rounded icons
[*][new] apn: added support for spusu MVNO (Austria)
[/LIST]
Click to expand...
Click to collapse
Nice work guys.. keep it up.. hope to see a bug free ROM from you..
Little advice :
Try to make radio images inline with device tree so that users don't need to flash a big chunk os before flashing this zip just only for latest radio images ...
shubhambhise said:
Nice work guys.. keep it up.. hope to see a bug free ROM from you..
Little advice :
Try to make radio images inline with device tree so that users don't need to flash a big chunk os before flashing this zip just only for latest radio images ...
Click to expand...
Click to collapse
Yeah, you're right. I created a flashable ZIP containing only the firmware, now about 33 MBs in size.
Feels like device rose like a Phoenix from the ashes of hell... Thank you for the rom
Amazing , thanks
Sent from my Pixel XL using XDA Labs
Please bring Camera2 API
Hello @Da Bozz Sir, I highly appreciate your great work and I only have two requests.... Please please implement the Camera2 API in your future build...
I know that one has to make changes to the device tree but I don't know how to do it...
(...in the QCamera2 folder by adding HAL3, etc...)????
But please, please implement it, the chipset SD801 does supports it?
And please add Ambient Display Feature...
Please reply sir...
Vaibhav Puri said:
Hello @Da Bozz Sir, I highly appreciate your great work and I only have two requests.... Please please implement the Camera2 API in your future build...
I know that one has to make changes to the device tree but I don't know how to do it...
(...in the QCamera2 folder by adding HAL3, etc...)
But please, please implement it, the chipset SD801 does supports it
And please add Ambient Display Feature...
Please reply sir...
Click to expand...
Click to collapse
Its impossible mate... Try and understand... In your listing of msm8974 devices, does any device has HAL3 enabled ?
AFAIK the answer is no... Our chipset is too old to implement it
Vaibhav Puri said:
Hello @Da Bozz Sir, I highly appreciate your great work and I only have two requests.... Please please implement the Camera2 API in your future build...
I know that one has to make changes to the device tree but I don't know how to do it...
(...in the QCamera2 folder by adding HAL3, etc...)
But please, please implement it, the chipset SD801 does supports it
And please add Ambient Display Feature...
Please reply sir...
Click to expand...
Click to collapse
Hello,
we are still investigating the possibilities of using the Camera2 API on this phone, but please note that it's highly unlikely that we get things to work flawlessly.
Ambient Display shouldn't be a big problem.
We just have to investigate if it causes any problems.
Great work from you guys, looking forward to future builds!
Can you upload screenshots..??
himanshu fulmali said:
Can you upload screenshots..??
Click to expand...
Click to collapse
Why? It's just LineageOS but with rounded icons like you've seen them on pixel devices.
himanshu fulmali said:
Can you upload screenshots..??
Click to expand...
Click to collapse
As soon as the UI updates are included in the build we will upload screenshots, but it's really just the same like on LineageOS.
Fusionalex said:
Hello,
we are still investigating the possibilities of using the Camera2 API on this phone, but please note that it's highly unlikely that we get things to work flawlessly.
Ambient Display shouldn't be a big problem.
We just have to investigate if it causes any problems.
Click to expand...
Click to collapse
U can take help from @shubhambhise , in his AEX, ambient display works super fine.
Sharma_Ji said:
U can take help from @shubhambhise , in his AEX, ambient display works super fine.
Click to expand...
Click to collapse
Thanks, we will take a look at it! Some devs talked about a possible negative performance impact, which is why the feature hasn't been included yet.
Great job.
Can i use Magisk and Substartum.
Fusionalex said:
Hello,
we are still investigating the possibilities of using the Camera2 API on this phone, but please note that it's highly unlikely that we get things to work flawlessly.
Ambient Display shouldn't be a big problem.
We just have to investigate if it causes any problems.
Click to expand...
Click to collapse
Thanks for your reply sir,
And I'm very happy to have great developers like you, who proved to be the best, I've just downloaded the 24th November build, and it's great that finally lineage os has ambient display enabled....
All the credit goes to you (@Fusionalex), @Da Bozz & @OrdenKrieger...
Sir, I would still have the request to test Camera2 API on this phone
You people are our last hope, because editing the Device Tree is beyond my reach, as it requires great dedication, knowledge and ambition, that I don't possess...
Sir, besides Cam2, I have one last request for you, please add three finger screenshot gesture and toast icons to your upcoming builds...
Please sir...
Waiting for your reply...
hardikkchavda said:
Can i use Magisk and Substartum.
Click to expand...
Click to collapse
Hello! Yes, you can use Magisk of course!
I don't know about Substratum sorry, it isn't included in the rom.
---------- Post added at 06:16 PM ---------- Previous post was at 06:15 PM ----------
Vaibhav Puri said:
Thanks for your reply sir,
And I'm very happy to have great developers like you, who proved to be the best, I've just downloaded the 24th November build, and it's great that finally lineage os has ambient display enabled....
All the credit goes to you (@Fusionalex), @Da Bozz & @OrdenKrieger...
Sir, I would still have the request to test Camera2 API on this phone
You people are our last hope, because editing the Device Tree is beyond my reach, as it requires great dedication, knowledge and ambition, that I don't possess...
Sir, besides Cam2, I have one last request for you, please add three finger screenshot gesture and toast icons to your upcoming builds...
Please sir...
Waiting for your reply...
Click to expand...
Click to collapse
Thanks! I'm glad you like our work!
The ambient display build from 24th has been taken down for now, because the implementation is incomplete, it's missing some settings which we will add later today.
Camera2 API is still work in progress sorry!
About the other 2 things: please describe more precisely what you want and we will consider it
Thanks for your valuable reply sir,
I was requesting for a popular gesture nowadays called the 3 Finger Swipe Screenshot
In this one, a user has to swipe from the top to the bottom dragging 3 fingers on the screen, this works as a gesture and takes a screenshot, it is very popular in Xiaomi devices (MIUI) and on OnePlus devices....
And now, many custom ROMs like Resurrection Remix, PureNexus, etc. have this feature
Attached picture 1 & 2 show a demo...
-----------------------------------------------------------------------
Second of all is the app icon that will appear on the toast message...
CM12.1 & CM13 stable versions have this feature which works flawlessly, attached picture 3 & 4 demonstrate how...
But in the nougat ROMs, users are provided with a switch to either enable it or to disable it...
But this "switch" has proved to be buggy in every nougat ROM that I have used (picture 5)
To implement this, one has to add this code to Toast.java file in the framework:
(android_frameworks_base/core/java/android/widget/Toast.java)
Code:
ImageView appIcon = (ImageView) mView.findViewById(android.R.id.icon);
if (appIcon != null) {
ActivityManager am =
(ActivityManager) context.getSystemService(Context.ACTIVITY_SERVICE);
if (!am.isPackageInForeground(packageName)) {
PackageManager pm = context.getPackageManager();
Drawable icon = null;
try {
icon = pm.getApplicationIcon(packageName);
} catch (PackageManager.NameNotFoundException e) {
// nothing to do
}
appIcon.setImageDrawable(icon);
}
}
I ported out this code from RR OS source code, but please consider investigating as I'm not sure if this will work on lineage os...
Link- https://github.com/ResurrectionRemi...ob/nougat/core/java/android/widget/Toast.java
Link to Lineage 14.1 toast.java :
https://github.com/LineageOS/androi...b/cm-14.1/core/java/android/widget/Toast.java
Link to CM13 toast.java :
https://github.com/CyanogenMod/andr...3.0-ZNH5Y/core/java/android/widget/Toast.java
Please have a look at this, whenever you get time.....
I will patiently wait...
Pixel Experience ROM for the Galaxy S9+ and the Galaxy S9
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential features for the proper functioning of the device
Based on Android 9.0
Click to expand...
Click to collapse
This it not a GSI. It is built on actual device trees
What's working/not working?
First up:
-HWC is disabled
-The signalbar always shows 0, altho calling and data have no issue and should work as intended.
Obviously Samsung's own features such as Samsung Pay, KNOX, Theme Center, Game Launcher, etc. won't be ported to LineageOS Pixel Experience. We may have our own implementation to similar functions, though.
Iris sensor does not work because AOSP upstream does not support that yet.
IMS services (VoLTE, VoWiFi, etc). Samsung has their own proprietary implementation. It is not really possible to easily port that to LineageOS PixelExperience.
Click to expand...
Click to collapse
Instructions:
Make sure TWRP has been installed and functional.
Make sure you are on the CSB3 based vendor and fw
Download the latest build linked below
Reboot to recovery
Wipe system, data and cache from the wipe menu
Flash the rom zip(and gapps). DONT flash gapps. they are already included in the rom.
(optionally) flash magisk
Reboot and enjoy :victory:
Downloads:
star2lte S9+ 19.02.2019
starlte S9 19.02.2019
CSB3 vendor HERE
Providing feedback:
You are more than welcome to provide any kind of feedback here.
(limited only to feature requests; it's called "pixel experience" for a reason and it should stay that way)
You can also msg me anytime on telegram @ Rainbow_Alex_Dash
Telegram group?
HERE
Changelog:
19.02.2019
Increased vibration strength
Fixed sdcard issues some people were having
Added walrus's smooth hax (which might be snake oil)
Added vendor version check at boot
Synced kernel sauce with CSB3 (which is now mandatory)
Added fingerprint override in order to pass CTS/safetynet.
Troubleshooting/FAQ:
Q: Videos aren't playing on youtube
A: Make sure you don't have any kind of adblock installed
Q: I'm on a dualsim variant and (a) sim isn't detected.
A: Try reinserting your sim and rebooting. This wierdly nuff only happens on some* dualsim variants and no one has sent me a logcat yet.
Q: My mobile data (3G/4G) is not working/only 3g shows
A: Go into mobile network settings and select/create an apn, also select 4G as the preferred network type.
Q: How does this compare to GSIS?
A: Much better all around. Faster,smoother etc. I don't think there's any reasons to use pie gsis anymore.
Q: How good is the camera?
A: Actually,(by my standards), pretty good. Almost comparable to stock. Ofc the aosp cam doesn't have the fancy filtering, features and stuff but by far not bad. Alot better than 8.1 roms anyway.
Q: Safetynet doesn't pass?
A: Yeah, i guess that's a thing. Go into magisk and download some module called props hide or something. Don't forget to run it from terminal. It should work from there
Q: The rom isn't booting/camera doesn't work
A: Flash/make sure you have the CSB3 vendor and fw, and try again. This has been tested. It's prolly something on ur end.
Q: The rom is in a bootloop/google apps keep crashing
A: You did read the instructions and NOT flash any gapps riighhttt?? smh, wipe /system,/data and /cache and start over
Q: I have another bug; How can i tell it to you while slightly increasing my changes of it ever getting fixed.
A: You can tell me what's going on either here or on telegram WITH A LOGCAT attached(required);if rom isn't booting at all attach /proc/last_kmsg.
Q: I don't know what/how to logcat. Is it really necessary?
A: Logcat or gtfo
Q: How can i support you?
A: Awwww thanks; On most of my posts on the left side there's a "donate to me" paypal button;. Send the seal some fish. Seriously. The seal realllyyyyy loves fish. You can do that,donations are more than welcome, or if you don't have any $ to spare you can also post here about how awesome i am (this surprisingly helps very much)
Credits:
BIG thankies to @Ivan_Meler. He was at the center of all of this, and he single handedly did the pie bringup
Jesec for the initial trees
The pixel experience team for creating the rom we so do enjoy
Many good people from the telegram group (linked above) that helped me create this project and spamming for etas
XDA:DevDB Information
PixelExperience 9.0, ROM for the Samsung Galaxy S9
Contributors
Rainbow_Dash, Ivan_Meler,jesec
Source Code: [url]http://github.com/rainbowdashh[/URL]
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: CSB3 pie vendor and fw
Based On: AOSP
Version Information
Status: Beta
Beta Release Date: 2019-02-11
Created 2019-02-11
Last Updated 2019-02-19
reserved
Yes... yes...yes.... FINALLY!!!! Thank you all developers SO MUCH!
Thanks a lot for your work , i havent found any bugs, its really smooth on my starlte. I´ll donate ASAP.
Is "OK Google" and voicematch working on this ROM?
It's happening boys! Thanks for this rainbow
Thanks for the Rom! Working good
Some things I noticed:
-SD card isn't working. Always says tap to fix
-some animations could be smoother but it's because of the HWC
Great first impression so far.
Thanks again!
Does any kernel work on this rom? This rom is really smooth and very good am surprised" greetings..
Just a quick update:
Mah boi @Eamo5 is cooking up endurance kernel for this, and he claims w it it's much smoother. Idk, i guess we'll wait and see.
Also i've built a couple other roms and will be opening threads shortly
Rainbow_Dash said:
Just a quick update:
Mah boi @Eamo5 is cooking up endurance kernel for this, and he claims w it it's much smoother. Idk, i guess we'll wait and see.
Also i've build a couple other roms and will be opening threads shortly
Click to expand...
Click to collapse
Do you think hwc will be fixable? Maybe Ivan knows a fix
Rainbow_Dash said:
Just a quick update:
Mah boi @Eamo5 is cooking up endurance kernel for this, and he claims w it it's much smoother. Idk, i guess we'll wait and see.
Also i've build a couple other roms and will be opening threads shortly
Click to expand...
Click to collapse
Beta release of Endurance is available in the telegram group. An XDA release will be coming shortly
Eamo5 said:
Beta release of Endurance is available in the telegram group. An XDA release will be coming shortly
Click to expand...
Click to collapse
Looking forward to it!
iamnotkurtcobain said:
Do you think hwc will be fixable? Maybe Ivan knows a fix
Click to expand...
Click to collapse
Maybe. We already have a couple of ideas.
Certainly haven't run out of options yet
what about the battery on daily usage?
i am wondering if its better than the stock which i am getting only 2 to 2:40 screen on time
(and the last question does ambient music work or not?)
(i still did not root or tripped the knox but i am coming from th OG Pixel and i missed stock android and i dont know if it worth it)
No sim card
I restored my EFS and carrier and not work
a0007 said:
No sim card
I restored my EFS and carrier and not work
Click to expand...
Click to collapse
You prolly have the dualsim variant. Can you try removing the simcard tray and rebooting
Dual sim here. Took tray out and rebooted. Only sees the 2nd sim.
Rainbow_Dash said:
You prolly have the dualsim variant. Can you try removing the simcard tray and rebooting
Click to expand...
Click to collapse
Every reboot yes dualsim. I have to removing sim tray and no signal is shown never and mobile data not working at all.
Please can you fix that. I love it because EdXposed work with it.
Sent from my SM-G965F using Tapatalk
I have dual sim and it works.
Some bug report:
1. Gboard sound and vibration disappear every time after restart or vibration mode on/off.
2. Settings menu randomly change its theme form white to black. Killing in recents helps.
3. All system vibrations are f.... You know that
Everything else is pretty smooth though