Database Develop

Xposed Modules On Stock Firmware Discussion

....!!!!PLEASE ONLY POST ABOUT XPOSED AND MODULES YOU ARE USING ON AT&T STOCK FIRMWARE NOT THE UNLOCKED U FIRMWARE AS THERE MAY BE DIFFERENCES IN EXPERIENCE AND USABILITY THAT MAY CAUSE PROBLEMS!!!!....
This thread is for anyone to posted what Xposed modules you use and if they are or are not working. It will also be a thread to let others see who are new to xposed or havent used it on their s7 edge yet what is and isn't working as well as identifying what modules should be avoided because they are causing problems with the phone ex. lag, freezing, bootloops, other. please comment what you are using along with your experience and any news related to xposed and or modules. i will (when i have time) edit this post with what i have installed what does and doesnt work as well as posting what others put here. of course there will be a working and not working section that will be updated when things break or become useable. hope this thread helps some people out and saves some time and trouble.
....AGAIN!!!!PLEASE ONLY POST ABOUT XPOSED AND THE MODULES YOU ARE USING ON STOCK AT&T FIRMWARE ONLY AS THERE CAN BE DIFFERENCES BETWEEN WHAT DOES AND DOESNT WORK ON STOCK FIRMWARE AND THE UNLOCKED U FIRMWARE!!!!....
....WORKING MODULES ARE IN POST #2....

....modules that work for me and or others....will be update as i use working modules or people post or pm working modules....i will not be including modules that do not work just to save time and space. At this point in time just assume it doesnt work unless someone can confirm it, dont want to kill your phone!!!!....
1. Greenify
2. Amplify
3. Xtouchwiz (turned some setting off that were on by default!!!! Fake system status i'm guessing is best turned off!!!!)
4. Neopower menu

rob219 said:
****ONLY ANPLIFY AND GREENIFY ARE WOTKING OUT OF THE ONES I HAVE INSTALLED IN THE PICS, ALL THE OTHER MODULES SHOWN ARE NOT WORKING AS OF NOW ON MY DEVICE****
Click to expand...
Click to collapse
Did you have any luck with RootCloak or XTouchWiz?

TehPirate_ said:
Did you have any luck with RootCloak or XTouchWiz?
Click to expand...
Click to collapse
rootcloak im unsure as i have uninstalled it (didnt need it) and xtouchwiz i hacent retried. something (maybe a setting in xtouchwiz) was giving me some sim card pop up that wouodnt go away on boot and wouod make me reboot to recovery to do something to ky sim that just failed and the pop up would be there upon boot. i had to odin to get rid of it. it happened 3 times and each time it happened i had rootcloak and xtouchwiz installed. since removing both i hacent had a problem. so no i didnt and i believe one of them caused the problem. if anyone is using both or one or the other let me know what you do and dont have enabled or disabled in each module.

rob219 said:
rootcloak im unsure as i have uninstalled it (didnt need it) and xtouchwiz i hacent retried. something (maybe a setting in xtouchwiz) was giving me some sim card pop up that wouodnt go away on boot and wouod make me reboot to recovery to do something to ky sim that just failed and the pop up would be there upon boot. i had to odin to get rid of it. it happened 3 times and each time it happened i had rootcloak and xtouchwiz installed. since removing both i hacent had a problem. so no i didnt and i believe one of them caused the problem. if anyone is using both or one or the other let me know what you do and dont have enabled or disabled in each module.
Click to expand...
Click to collapse
I appreciate your feedback. It would be inaccurate for me to reply with mine as I use the unlocked firmware. But in this case, the results were the same more or less.

TehPirate_ said:
I appreciate your feedback. It would be inaccurate for me to reply with mine as I use the unlocked firmware. But in this case, the results were the same more or less.
Click to expand...
Click to collapse
i have since installed xtouchwiz and have no problems i turned a few things off that were on by default. i turned off fake system status and the disable scaling feature that was on. it works. rootcloak i have also reinstalled but i don't think it works. im not sure, i know snapchat has problems logging in if your rooted and i am experiencing this problem with or without rootcloak so i believe it is not working but i could be wrong.

Hi, I am new to xda and Android as a whole. So I have rooted (SM-G935A) and I can't find any way to install xposed because TWRP doesnt support the snapdragon variants. Do you mind telling me how you did it?

RileyIssKing said:
Hi, I am new to xda and Android as a whole. So I have rooted (SM-G935A) and I can't find any way to install xposed because TWRP doesnt support the snapdragon variants. Do you mind telling me how you did it?
Click to expand...
Click to collapse
flashfire

Another can't install framework thread

Hello to all you folk who haven't gotten tired of helping out this scrubs, especially the recent surge of scrubs trying to install the framework.
I am yet another one of those scrubs.
Reasons that you can probably guess, but I won't mention (They might be watching!), I rooted my phone, installed TWRP manager, tried to flash the framework, but it failed.
Why it failed though, I do not know. All I see is the Android icon fainting with an exclamation mark on top.
It then gives me options to reboot, update with adb, check the logs, etc..
I checked the logs to find if there were any errors, but it was just a huge wall of text of many many things that seemed not to pertain to my issue.
I have Samsung S6, SDK 22, ARM64 (yes I checked it all). So I got the framework for v86, SDK22, ARM64.
Rooted my Phone, have Superuser, installed TWRP manager. The only thing I haven't done is activate/install bootloader. Is that what might be causing the issue?

Find wanam's xPosed
Profit

Wouldn't I need the xposed framework for that again? (Seeing as it's an xposed module?)

Ilesyt said:
Wouldn't I need the xposed framework for that again? (Seeing as it's an xposed module?)
Click to expand...
Click to collapse
I'm feeling nice, so here (at least you tried to search unlike others)
http://forum.xda-developers.com/showthread.php?t=3180960

Nergal di Cuthah said:
I'm feeling nice, so here (at least you tried to search unlike others)
http://forum.xda-developers.com/showthread.php?t=3180960
Click to expand...
Click to collapse
Thanks! I will check it out!

[Discussion] PokeMon Go Magisk Discussion Thread

[size=+2]This thread has been created to reduce the amount of clutter in the main Magisk thread, please discuss Magisk + PokeMon Go here.​[/size]

With me is this happening, did the process and pokemon jog go wheel with root, however when I install Xposed does not work, I downloaded the zip and the apk Xposed, desintalei what was, I was in recovery installed the zip, when you restart disable the root by magisk manager and I run the game without success, to turn off the Xposed and restart the game runs, but when active and restart does not work, sometimes the apk Xposed for work, or is giving error and asking to check records, someone help there? They will excusing my English

So at this point I can't log into pogo because I have Xposed installed (systemless). I was using magisk with phh super user...wasn't working with SuperSU (even with compatible magisk)
At this point if I do a soft reboot it deactivates Xposed (for whatever reason) I can play Pokemon but have to reboot to activate Xposed. So anytime I want to play I have to soft reboot then full reboot. Luckily I don't have to go through optimizing apps...but is there a way around this?

Someone bored should make a zip that removes everything and reinstalls the rest of the stuff needed.
Sent from my SM-N920W8 using XDA-Developers mobile app

DAGr8 said:
Someone bored should make a zip that removes everything and reinstalls the rest of the stuff needed.
Sent from my SM-N920W8 using XDA-Developers mobile app
Click to expand...
Click to collapse
You?

I rather wait for an xposed update. I can play with 0.35 if I really get the itch in the meanwhile. I hardly battle and until legendaries start to appear, I'm just slowly leveling up.
If 86.2 is working, like someone mentioned on the other thread, there has to be a workaround for the 86.5 (maybe a future 86.6?)
Only gripe is that Google is all over this because of paynet so it will be a constant battle.
Only way to calm down this race is for Google/Niantic easing pressure on pogo security so there aren't so many people trying to hack the system and leaving paynet alone.
That would be the smartest move for all (not mentioning calming down thousands of root users).
Interesting times
Enviado do meu GT-I9195 através de Tapatalk

anthonymackay said:
So at this point I can't log into pogo because I have Xposed installed (systemless). I was using magisk with phh super user...wasn't working with SuperSU (even with compatible magisk)
At this point if I do a soft reboot it deactivates Xposed (for whatever reason) I can play Pokemon but have to reboot to activate Xposed. So anytime I want to play I have to soft reboot then full reboot. Luckily I don't have to go through optimizing apps...but is there a way around this?
Click to expand...
Click to collapse
Actually systemless xposed v86.2 is working fine woth Pokemon go. Some people posted the steps in the other thread.

So I flashed the latest chainfire SuperSU 2.78 r1, v86.2 systemless xposed, and suhide v0.53. Everything works good only problem I'm having excessive location jumps to/from real location while playing pogo with xposed pokemon. Used to have the odd jump back/forth but this is every 5-10 seconds.

juangcardoso said:
Actually systemless xposed v86.2 is working fine woth Pokemon go. Some people posted the steps in the other thread.
Click to expand...
Click to collapse
I thought I was going crazy. One whole day, two full resets and re-roots later and found the system-less xposed glitch that took me here. Does this 86.2 really works?. Don't want another round with my phone.

sigiloso said:
I thought I was going crazy. One whole day, two full resets and re-roots later and found the system-less xposed glitch that took me here. Does this 86.2 really works?. Don't want another round with my phone.
Click to expand...
Click to collapse
Yes, but there are the correct way to flash it with SuperSU and suhide. You can find these steps in the systemless xposed as I told u.

juangcardoso said:
Yes, but there are the correct way to flash it with SuperSU and suhide. You can find these steps in the systemless xposed as I told u.
Click to expand...
Click to collapse
I have tried so many times to do xposed systemless but none of them worked.
I returned to stock image. I created file with "SYSTEMLESS=true" in /data/.supersu
I flashed SuperSU 2.78. Then I flashed systemless xposed v.86.2.
I flashed suhide 0.53. wipe cache/dalvik and nothing works because I think its detecting the xposed framework

juangcardoso said:
Actually systemless xposed v86.2 is working fine woth Pokemon go. Some people posted the steps in the other thread.
Click to expand...
Click to collapse
Hi!
Could you link the post to this thread please? I'm sure it would help a lot of people (me included). I scanned through the other thread but couldn't find it. Perhaps, I missed it somewhere.

naeco said:
Hi!
Could you link the post to this thread please? I'm sure it would help a lot of people (me included). I scanned through the other thread but couldn't find it. Perhaps, I missed it somewhere.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3450396
Envoyé de mon ONEPLUS A3003 en utilisant Tapatalk

anthonymackay said:
So at this point I can't log into pogo because I have Xposed installed (systemless). I was using magisk with phh super user...wasn't working with SuperSU (even with compatible magisk)
At this point if I do a soft reboot it deactivates Xposed (for whatever reason) I can play Pokemon but have to reboot to activate Xposed. So anytime I want to play I have to soft reboot then full reboot. Luckily I don't have to go through optimizing apps...but is there a way around this?
Click to expand...
Click to collapse
Magisk requires a full boot too load is modules, that's why xposed is disabled with a soft boot.
You can also use the disable xposed toggle in the material xposed installer. It would still require a reboot.

Guess I'm out of luck. My phone doesn't meet SuHide requirement. I'm running twrp v.2.8.7.0 not v.3.x.

Anyone know if there is an 86.2 version for Lollipop? all I can find is the sdk23 version for Marshmellow.

Habulda said:
I have tried so many times to do xposed systemless but none of them worked.
I returned to stock image. I created file with "SYSTEMLESS=true" in /data/.supersu
I flashed SuperSU 2.78. Then I flashed systemless xposed v.86.2.
I flashed suhide 0.53. wipe cache/dalvik and nothing works because I think its detecting the xposed framework
Click to expand...
Click to collapse
naeco said:
Hi!
Could you link the post to this thread please? I'm sure it would help a lot of people (me included). I scanned through the other thread but couldn't find it. Perhaps, I missed it somewhere.
Click to expand...
Click to collapse
I manage to play Pokemon Go w/ xposed and root with these tips: http://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268/post68778700

Hey guys. Galaxy s3 mini with cm12.1 (android 5.1.1) fresh install. Tried to install magisk but it says unable to detect boot image. What is the problem ? Please help me.

I need download xposed-v86.2-SDK22.arm. Please post the link for donwload XPOSED 86.2 SDK22 arm!! Help me please.
I find the zip file anywhere. I need SDK22 arm 86.2 for android 5.1 - Someone can attach the direct link to download the ZIP please?

naeco said:
Guess I'm out of luck. My phone doesn't meet SuHide requirement. I'm running twrp v.2.8.7.0 not v.3.x.
Click to expand...
Click to collapse
a user report that it works with twrp 2.8.7

[Q] Can't really activate any modules

Hi all,
I have a problem. I'm using an OnePlus 5 and I can't use Xposed. I have just tried those 2 things. I have magisk updated to 14.0
1) I installed the version 09-09-2017 by dvdandroid, then I installed 26-07-17 v87 sdk25 by PurifyOs, all seems OK xposed tells that is installed and working, so I try to download some modules, activate them, reboot, but when I try to use them they tell me "please activate the module", I tryed clearing cache and dalvik, reinstalling so many times but nothing.
2) So I removed the PurifyOs one, and wanted to try to install the systemless one. I open Xposed, press install, it auto flashes from TWRP but there is a message error "dev/magisk/mirror/bin is not setup properly". So I try to download it as a module from magisk, try to install but gives the same error.
Can you help me? Thanks

Up...

Up...

Uppppppppp

Having the same issue on Oneplus 5 running android 7.1.1.
Any solutions?

Up....

same issue oneplus 3t stock

Uppppp

I couldn't activate any modules either, even though framework was green/good.
I re-installed my ROM and re-did the Xposed setup, ensuring I was using the CORRECT files.
Such as for Magisk Xposed vs. non-Magisk Xposed.
It's working now.

CZ Eddie said:
I couldn't activate any modules either, even though framework was green/good.
I re-installed my ROM and re-did the Xposed setup, ensuring I was using the CORRECT files.
Such as for Magisk Xposed vs. non-Magisk Xposed.
It's working now.
Click to expand...
Click to collapse
Thanks for your answer, I already did but nothing changed..

If ur on oos with encryption, you need to soft reboot the phone before the modules work.

8monochrome said:
If ur on oos with encryption, you need to soft reboot the phone before the modules work.
Click to expand...
Click to collapse
Already tried, nothing happened

I'm not sure how the OnePlus works in comparison to my Moto G4, but I had the same problem with 7.1.x. I couldn't get Xposed to work on any roms running Nougat. Went and installed an AOSP marshmallow rom and Xposed is working very well. My advice would be to downgrade to marshmallow. It's definitely worth the Xposed compatibility because even if you do get that aspect of it going, many modules don't support nougat yet. I was reluctant when I first heard this, but I' don't regret my decision at all. I'm running 12 modules right now with no issues at all and loving it. Hope this helps.

Xposed installer

I installed the latest one on my galaxy a5 2017 sm-520f with magisk on rooted phone. ResurrectionosOs 6.2.1 8.1oero. I did it with magisk and I flashed manually. It even says closed version 90 is activate, but when I try the use any of the modules they don't work.
Thanks I'm advance

log

@goodTASte,
Just an FYI. Never paste a long log. Attach it or put it online and post a link. (EDIT: Oh, I see you don't have the ten posts yet.)
There should be no reason to run Amplify on Oreo. No benefits plus I believe it's not totally functional. I suggest disabling/removing it. Couple of other modules I thought weren't quite up to date for Oreo also.
In fact, disable all modules and test them one by one. Ofc rebooting after each activation.
Lots of dalvik related stuff. Maybe a dalvik wipe is in order? Not sure but it doesn't hurt.
LG G3 D851, Candy7 v6.0 ROM, Google free - no microG, MultiROM, XDA Legacy

I did the whole process again. The issue that came up before that "xposed installer is installed, but not active" where the solution seemed to be look for root/data/data/de.robv.android.xposed/config/ and there eliminate (delete) modul list file. where he guy used lollipop i dont know, i only have 4 files there cache, code_cache no_backup and shared_prefs. Previusl i deleted all 4 of these, and after that xposed said its active. What should i do? I
Rebooted it works like charm. Well not exactly i installed minmin guard and its not blocking the ads. It supposed to do that. Guess modules still not work