Database Develop

[STOCK][M][TMO] H811 20i Images + KDZ + Flashable Zips + OEM Unlock

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Official stock Android 6.0 Marshmallow 20i files for the T-Mobile LG G4 H811 variant only. Included below: TWRP-flashable stock rom, boot, modem and bootloader zips. Stock 20i KDZ and individual images are also included.​
20i NOTES...
1. *AntiRollback / QFuse V2* Safe to downgrade to 10N only.
2. Marshmallow bootloader requires bootloader unlock via fastboot
Requirements:
You must have TWRP 2.8.7+ installed to use these zip files. Thanks to Dees_Troy as always for that. Or you need LGUP installed to flash the KDZ in download mode.
Install Directions:
You can install stock 20i M with zip files in TWRP or flashing a KDZ in LGUP or LG Bridge. Due to the new 20i bootloader fastboot oem unlock requirements there is almost no benefit in using one method over the other.. both KDZ or ZIP upgrade methods work. If coming from Lollipop there is no way to retain TWRP or root since the new bootloader has a new unlock method.
To flash via zip in TWRP:
1. Download LG-H81120i-Flashable.COMPLETE.zip place it on internal or external sdcard (external preferred).
2. (re)Boot into TWRP if not there already.
3.* Backup current partitions: boot, system, data, efs to external sdcard if possible (optional but suggested)
4.* Up to you if you want to wipe data (TWRP > Wipe > Swipe slider) but not needed if coming from a stock rom.
5. Install LG-H81120i-Flashable.COMPLETE.zip (Install > select zip > swipe to confirm/flash)
6. After zip finishes you can reboot into M! (if TWRP asks if you want to install SU, HIT NO!!!)
7. If you want root or TWRP follow the bootloader unlock directions in the next section below.
To flash via KDZ:
1. Easiest way to flash the KDZ is just using the official LG Bridge tool. You can grab it for Windows or Mac HERE
2. Alternative to LG Bridge is downloading the 20i KDZ yourself from the Codefire directory link further below then following the LGUP thread HERE for a how-to on KDZ flashing. .
3. If you want root or TWRP follow the bootloader unlock directions in the next section below.
Bootloader OEM Unlock + Root:
Starting with the Android 6.0 20i bootloader it has to be unlocked, sorta like a Nexus, with fastboot. Previously only 'OEM Unlock' had to be toggled in Android Developer settings for TWRP or custom boot images to work.
1. Flash stock 20i using zip or KDZ. Boot into Android after upgrade to 20i.
2. Download the twrp-2.8.7.1-h811.img file HERE. This file needs to be on your computer and external sdcard*.
3. Download the latest SuperSu zip (2.67+) from HERE [Thanks to Chainfire] and stick on external sdcard*.
4. Confirm "OEM Unlock" is set to enabled in the hidden Developer Settings.
5. Enable "USB Debugging" in Developer Settings, connect USB cable PC <-> Phone... and send the following 3 commands in command prompt/terminal:
Code:
adb reboot bootloader (phone reboots to bootloader)
fastboot oem unlock (this wipes ALL data!!)
fastboot boot twrp-2.8.7.1-h811.img (phone boots TWRP)
6. For perm TWRP: In TWRP hit Install > Images... (bottom right corner) > select TWRP.img on ext sdcard > select "recovery" > swipe.
7. If you want root: Hit the Home button > Install > select SuperSU zip on external sdcard > swipe.
8. All done. Reboot into Android. (if TWRP asks if you want to install SU, HIT NO!!!)
*if you do not have an external sdcard to save SuperSU and the TWRP.img onto.. you will need to skip saving the files to sdcard until AFTER you fastboot OEM unlock and boot into TWRP. After fastboot booting TWRP you can use adb push to put SuperSU and TWRP.img onto the internal sdcard to install with TWRP. Or you can use the MTP mount option in TWRP and drag n' drop the files from the computer to the phone. You cannot store the files on the internal sdcard before the OEM unlock because OEM unlock wipes all you data.
Please do not mirror my files!
Downloads:
LG-H81120i-Flashable.COMPLETE.zip
100% stock untouched system, boot, modem and bootloader.
LG-H81120i-Flashable.Modem.zip
This is a flashable stock 20i modem.
LG-H81120i-Flashable.Boot.zip
This is a flashable stock 20i boot.img. Boot.img contains kernel + dtb + ramdisk.
LG-H81120i-Flashable.Bootloader.zip
This is a flashable stock 20i bootloader. It contains aboot, factory, hyp, laf, pmic, raw_resources, rpm, sbl1, sdi, sec and tz. If you have not already unlocked the bootloader through fastboot on 20i or higher... you will need to run stock LG M to unlock before using the M bootloader on CM or AOSP roms.
Also, KDZ + all stock images for 20i are available in the link below...
CODEFIRE DIRECTORY
MD5 Sums:
Click button below to view MD5 for each file...
MD5 (aboot.img) = 1d46ac119f89e48bb5c7d412a01eaf70
MD5 (boot.img) = 01ae6bd65523428567cbd5e012b1fef7
MD5 (factory.img) = 6e2d5a6f596befbb9b4a6852712b0c6c
MD5 (H81120i_00_0201.kdz) = 21b011e8b0410b64336c40bf6817f32a
MD5 (hyp.img) = 2c633be343054a300e4c161158762db3
MD5 (laf.img) = c7b4b2e478ce4749089d07de3a0be823
MD5 (LG-H81120i-Flashable.Boot.zip) = bfa2f1b8cbb9a55af23be7ac080c1ea4
MD5 (LG-H81120i-Flashable.Bootloader.zip) = 527bb58d7f9fcbaa383c6b4500d91424
MD5 (LG-H81120i-Flashable.COMPLETE.zip) = bf9d74bb603063e3e45549e1cfef9c4d
MD5 (LG-H81120i-Flashable.Modem.zip) = 3509dda24c85cb60c07d5818823e9524
MD5 (modem.img) = 7e67c715f70b5b6d797a2c6c71247279
MD5 (persist.img) = 451427e31a42ff055adeb7364b9b927d
MD5 (pmic.img) = 27949a20917c61f9fbb296178565b4b1
MD5 (raw_resources.img) = 43d74c6229d6e4ac851844ce8933c0c7
MD5 (rct.img) = 03e489583925004bab373b4fd71ab251
MD5 (recovery.img) = 41c1d13acd617d882e8f8ac678ce3b94
MD5 (rpm.img) = 3f1c59968b8c798fbb664cd279076deb
MD5 (sbl1.img) = a7ee1a6e3370917b6b57e927b337a83e
MD5 (sdi.img) = df16bace89164b4a8ad224fb0ca4f4c8
MD5 (sec.img) = e1d32ec012c59dd9020687ea71241d1a
MD5 (system.img) = d1f18956219cfe75d0732d1ce7be31ea
MD5 (tz.img) = 0088536b7dbf8013fb49055db5410a7f
Downgrade:
To downgrade you can use TWRP to restore your backups... and then just flash the matching bootloader zip and modem zip from my previous threads... or just check the CODEFIRE DIRECTORY link for previous stock files.
OR
Use LGUP HERE to flash a previous KDZ version. KDZ will remove TWRP but easy enough to reinstall that.
Click to expand...
Click to collapse
y u quote OP?
Follow me on twitter for future updates on LG-related things - twitter.com/@utoprime
Find this thread helpful? Like getting M ASAP? Enjoy flashable zips? Hit the Thanks button!
Feeling extra generous? Hit the Donate button under my name in post #2 or click my name at the top of this post.
Seems XDA removed the visible Donate button in OP. Thanks XDA...
Thank you to the following people for their donation:
@MickyFoley
@mark-e-mark
#TEAMCODEFIRE

I'll be using this space to respond to some questions rather than posting throughout the thread where others may not see it. Everything should be pretty standard at this point though. These are 100% stock files.. not debloated or deodexed or anything.
Feb 16 2016
I have edited the OP to suggest the 2.8.7.1 TWRP over the 3.0.0-0 version for now. I have had a few users in IRC tell me that after flashing 20i, unlocking bootloader, installing twrp then flashing CM13 causes some issues with data not mounting and some mention of "cannot find crypto footer". Will talk to dees_troy tomorrow hopefully and see what's what.... not sure if it's a TWRP issue.. or an LG issue or wat. But just in case.. using a known good working TWRP is the best bet for now.
Q & A:
Q:
DrakenFX said:
I know the answer but, updating via LG Bridge will loose Root/TWRP right?
If that the case which i know it is, is there a way to root in Marshmallow? Or is just safe to flash the files but stock recovery?
Click to expand...
Click to collapse
A:
due to the new bootloader unlock on 20i it is possible to flash stock unrooted 20i and then bootloader unlock and install TWRP/root. Directions for bootloader unlock are in the OP!

Wooooohooooooo
Sent from my LG-H811 using Tapatalk

This was fast!! Thank you!

i love you autoprime ! <3

Holy crap outta nowhere. Thank you auto!

Thanks. Will try tonight.
Pat

@autoprime
I'm so wanna give you a hug , been waiting for this for a while
Question..
I know the answer but, updating via LG Bridge will loose Root/TWRP right?
If that the case which i know it is, is there a way to root in Marshmallow? Or is just safe to flash the files but stock recovery?

Yes!

Thank you!

Just installed all this along with the latest xposed.
Now I have secure booting error 1003.
Wtf. I followed everything to a T how do I get back into TWRP from here?
I had OEM unlock checked before I flashed.

Raptor5150 said:
Just installed all this along with the latest xposed.
Now I have secure booting error 1003.
Wtf. I followed everything to a T how do I get back into TWRP from here?
I had OEM unlock checked before I flashed.
Click to expand...
Click to collapse
Check out this post. Stated you need OEM Unlocked in Developer Options first:
http://forum.xda-developers.com/showpost.php?p=62104913&postcount=3
Also to get to TWRP: completely shut down the phone. Remove the battery if you need to. Then when it's off, hold down Power and Vol Down buttons together. Then when the LG logo appears let go of Power Button for a second (still holding down Vol Down) , then hold the Power Button and Vol Down again. The factory reset screen comes back, click yes and yes. It will reboot into TWRP. (this is if you know for a fact TWRP is still there)

aoaleman said:
Check out this post. Stated you need OEM Unlocked in Developer Options first:
http://forum.xda-developers.com/showpost.php?p=62104913&postcount=3
Click to expand...
Click to collapse
I could have sworn I had it checked. I always have it checked.
Especially on a phone that will let me.
Now what do I do? Its just bootlooping the LG screen.

Raptor5150 said:
I could have sworn I had it checked. I always have it checked.
Especially on a phone that will let me.
Now what do I do? Its just bootlooping the LG screen.
Click to expand...
Click to collapse
You wouldn't have it checked if you flashed the complete zip above. I'm guessing you would need to wipe all (except internal and/or sd card), then reflash the complete zip, boot into system. Check OEM unlocked in Dev Options. Then reboot back to recovery, flash SuperSU.
I'm thinking this would make it work, not sure though.

aoaleman said:
You wouldn't have it checked if you flashed the complete zip above. I'm guessing you would need to wipe all (except internal and/or sd card), then reflash the complete zip, boot into system. Check OEM unlocked in Dev Options. Then reboot back to recovery, flash SuperSU.
I'm thinking this would make it work, not sure though.
Click to expand...
Click to collapse
Its bootlooping though how do I get past this?
edit: Read your edit

Coming from stock 10n, Wiped, Flashed 20i zip, flashed SuperSU -
Now i get "Secure booting error - Error Code:1003" then continues to bootloop showing that error everytime
Can't even boot into recovery, damn i'm screwed all day at work only Macs here D':

Raptor5150 said:
I could have sworn I had it checked. I always have it checked.
Especially on a phone that will let me.
Now what do I do? Its just bootlooping the LG screen.
Click to expand...
Click to collapse
You can Re-check just go to DEVELOPER OPTION and check OEM ENABLE gain

Doing the factory reset still didnt work. GOD DAMN IT.
Sigh... Phone is just a brick now I guess.

Raptor5150 said:
Doing the factory reset still didnt work. GOD DAMN IT.
Sigh... Phone is just a brick now I guess.
Click to expand...
Click to collapse
Factory Reset screens don't take you to TWRP? What happens?

aoaleman said:
Factory Reset screens don't take you to TWRP? What happens?
Click to expand...
Click to collapse
Just shows the secure boot error again doesnt load into anything. Which I have no idea how that is possible. Ill keep trying. But I hit yes and yes and then nothing. Phone reboots and keeps secure booting error.

[TOOL][OP6T] TOOL ALL IN ONE (Drivers|Unlock|TWRP|Factory Image|Stock Recovery)

This is the OnePlus 6T's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread
TOOL ALL IN ONE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Install Drivers
Unlock Bootloader
Lock Bootloader (use carefully)
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Automatic ROOT
Install APKs
Uninstall APKs
Take a Screenshot
Take a Screen Reocrd
Flash Partitions
Erase All Data (This function can decrypt the phone)
Reboot Phone
Update the Tool to latest version
Update Adb and Fastboot to latest version
Set Adb and Fastboot priviliges in system wide
Install Zip directly from PC (Required TWRP on phone)(These functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect TWRP on my phone)
Flash Fastboot ROM
Delete downloaded files
ADB File Manager
DEVICE LIST
If you want you can send a request to add a new device here:
New Device Request Form
Device List
DOWNLOAD
Original Thread
DONATE LINK
If you want to support the project please consider making a donation, thanks.
​

mauronofrio said:
This is the OnePlus 6T's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread
TOOL ALL IN ONE
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Unlock Bootloader
Lock Bootloader (use carefully)
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Install APKs
Uninstall APKs
Take a Screenshot
Flash Partitions
Erase All Data (This function can decrypt the phone)
Reboot Phone
Update the Tool to latest version
Update Adb and Fastboot to latest version
Set Adb and Fastboot priviliges in system wide
Install Zip directly from PC (Required TWRP on phone)(These functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect TWRP on my phone)
Flash Fastboot ROM
Delete downloaded files
ADB File Manager
DEVICE LIST
If you want you can send a request to add a new device here:
New Device Request Form
Device List
DOWNLOAD
Original Thread
DONATE LINK
If you want to support the project please consider making a donation, thanks.
​
Click to expand...
Click to collapse
YESSSSSSS!!!! will try that soon ))))

spaziomilano said:
YESSSSSSS!!!! will try that soon ))))
Click to expand...
Click to collapse
Waiting for a working TWRP

I mean, props to OP. The device isn't even out yet and there is still tools for it!

Nice to see! Kudos

When do you think the root is gonna be available?

pcplayer said:
When do you think the root is gonna be available?
Click to expand...
Click to collapse
It's not a problem of root, Magisk works certainly here, it's a problem of patching the boot image.
Either you wait for a TWRP port on this phone, either you want to use the hard way and patch your boot manually like it's explained here https://forum.xda-developers.com/android/software-hacking/root-recovery-root-device-magisk-t3779454
But you need a minimum experience in playing with adb and fastboot

Striatum_bdr said:
It's not a problem of root, Magisk works certainly here, it's a problem of patching the boot image.
Either you wait for a TWRP port on this phone, either you want to use the hard way and patch your boot manually like it's explained here https://forum.xda-developers.com/android/software-hacking/root-recovery-root-device-magisk-t3779454
But you need a minimum experience in playing with adb and fastboot
Click to expand...
Click to collapse
I updated the tool to automatically root 9.0.4 version

mauronofrio said:
I updated the tool to automatically root 9.0.4 version
Click to expand...
Click to collapse
Wow, this means to simplify our lifes!!
Just enable oem unlock and usb debug in settings, connect the OP 6T to pc, reboot in bootloader mode and we can unlock BL, root without adb commands.
Mauronofrio #1

awesome stuff, thanks

Getting my 6t tomorrow, will be unlocking the bootloader and will root it. Is there a official twrp for this device yet?

vineet381 said:
Getting my 6t tomorrow, will be unlocking the bootloader and will root it. Is there a official twrp for this device yet?
Click to expand...
Click to collapse
Unfortunately no

@mauronofrio what magisk's root version is pushed up from your tool? 17.1 or 17.3?

gnam said:
@mauronofrio what magisk's root version is pushed up from your tool? 17.1 or 17.3?
Click to expand...
Click to collapse
The tool will automatically flash a patched boot.img and will install the magisk manager. The boot.img is patched with magisk 17.3

Will this tool work with the TMobile version of the 6t?

mauronofrio said:
The tool will automatically flash a patched boot.img and will install the magisk manager. The boot.img is patched with magisk 17.3
Click to expand...
Click to collapse
do we need to restore stock book img before installing new OTA ?
Can we install a custom kernel through this tool currently?

Let me get this staright. I've been out the game ever since I got stuck with the T-Mobile Galaxy S7 edge. This tool will sim and bootloader unlock without having the need to wait on T-Mobile sending you the the boot loader token or even your phone isn't paid for yet to be even sim unlocked???

cultofluna said:
do we need to restore stock book img before installing new OTA ?
Can we install a custom kernel through this tool currently?
Click to expand...
Click to collapse
No, when there will be a new update you should flash the stock full rom and from magisk manager keep the root
b0ricuaguerrero said:
Let me get this staright. I've been out the game ever since I got stuck with the T-Mobile Galaxy S7 edge. This tool will sim and bootloader unlock without having the need to wait on T-Mobile sending you the the boot loader token or even your phone isn't paid for yet to be even sim unlocked???
Click to expand...
Click to collapse
ichardy said:
Will this tool work with the TMobile version of the 6t?
Click to expand...
Click to collapse
This tool actually doesn't support t-mobile version

mauronofrio said:
No, when there will be a new update you should flash the stock full rom and from magisk manager keep the root
This tool actually doesn't support t-mobile version
Click to expand...
Click to collapse
I just realized I was on the wrong forum, my apologies.
Edit: everything is different now, new layout, I'm confused I guess it's AIO now. ??*

I Made a video on how to use the tool kit
#Oneplus6T #Unlock #TWRP #Root #Easy&Simple #Toolkit Method #Under4Minutes

[RECOVERY][ROOT]TWRP 3.2.3-1 Galaxy A7 2018/A750

Unofficial release -TWRP recovery for the Galaxy A7 2018 - SM-A750F EXYNOS 7885
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP 3.2.3-0 Released
Aug 6, 2018
TWRP 3.2.3-0 is out now for most currently supported devices.
What's new in 3.2.3-0:
* Fix automatic installing of OTA zips on encrypted devices
* Remove SuperSU from TWRP
* Support both md5 and md5sum file extensions when doing MD5 checking for zip files
Want to get notifications when we release new versions of TWRP? Install the TWRP app and select your device!
We need your help! The bulk of TWRP work is done by a handful of people on a volunteer basis. We have pushed most of our device files to our github and we have a gerrit instance. If you have the ability, please help us maintain our official devices and/or add your device to our official device list. Thanks in advance!
You can track the progress of builds here
Update 25/12/2018
Beta build released.
Current status - (Tested working)
Treble supported
You flash this at your own risk. Please ensure you have the stock ROM to hand downloaded from SAMMOBILE in case of problems. This will trip the knox counter.
NOTE: ON ANDROID 5.1.1> DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
*****INSTALL INSTRUCTIONS:*****
Flash with ODIN in the AP slot.
1. Put your device in DOWNLOAD mode.
(Hold POWER + VOL DOWN + VOL UP)
2. Load the file below into the AP slot, uncheck AUTO-REBOOT and hit start.
twrp_3.2.3-1_a750_251218
3. After flashing and ODIN reports PASS immediately force reboot to recovery. Do NOT let the device boot to the OS.
You should now see TWRP recovery.
4. Flash the RMM bypass zip
https://forum.xda-developers.com/attachment.php?attachmentid=4481843&d=1524258795
NOTE: FAILURE TO FOLLOW THE STEPS ABOVE IMPLICITLY WILL RESULT IN STOCK RECOVERY REPLACING TWRP AT FIRST BOOT.
5. Reboot to TWRP (Do not boot to the OS yet)
*****OREO ROOT INSTRUCTIONS:*****
NOTE: To mount data it is necessary to first *FORMAT* (not wipe) the /DATA partition using the FORMAT DATA button under the wipe options.
PLEASE NOTE THIS WILL DELETE EVERYTHING ON INTERNAL STORAGE AND FACTORY RESET THE DEVICE, SO BACK UP ANYTHING YOU WISH TO KEEP.
Continue with the instructions below to prevent the data partition becoming re-encrypted.
1. To root I suggest downloading and installing the latest Magisk as this is a currently supported project, SuperSu is no longer getting active development.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
2. Copy the Magisk zip to a Micro sd card then install with TWRP.
3. Enjoy your rooted device.
DEVICE TREE: soon
PLEASE DO *NOT* DIRECT LINK TO THESE FILES. PLEASE LINK TO THIS POST
Credits: Me, Teamwin, @BlackMesa123 for RMM bypass zip.
Please note I don't own this device and spend a lot of my free time bringing these builds for you to use and benefit from.
FEEDBACK IS APPRECIATED PLEASE.
THANKS.
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU

158 views, 20 downloads and not one reply.
Smashing guys. :good:

4. перепрограммируйте обходной zip- архив rmm.можно поподробнее?
Mod edit: English please!
Google translation:
4. reprogram the rmm bypass zip archive. can you be more specific?

Odin shows Failed !! Tried 3 Times ? Had to Flash the Firmare Again.
Help !!

notoriouschyld said:
Odin shows Failed !! Tried 3 Times Had to Flash the Firmare Again.
Help !!
Click to expand...
Click to collapse
Sorry about that, build error on my end. Fixed now.

It will not work on SM-A750FNXXU1ARIC?

Sfuj24 said:
It will not work on SM-A750FNXXU1ARIC?
Click to expand...
Click to collapse
Is that a statement or question?

Hey. Does it work well? I wanted to install myself. but it seems to me that this is not a complete instruction. Does OEM unlock need to be enabled?

powermen27 said:
Hey. Does it work well? I wanted to install myself. but it seems to me that this is not a complete instruction. Does OEM unlock need to be enabled?
Click to expand...
Click to collapse
No matter how complete an instruction is, if you don't bother reading it in the first place it's not going to make any difference.
As clearly posted in the OP:
NOTE: ON ANDROID 5.1.1> DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
Click to expand...
Click to collapse

sorry

ashyx said:
Sorry about that, build error on my end. Fixed now.
Click to expand...
Click to collapse
Tried with the new TWRP.img but I'm having a Bootloop on the Samsung Boot Screen.
Help
Take your Time !!

notoriouschyld said:
Tried with the new TWRP.img but I'm having a Bootloop on the Samsung Boot Screen.
Help
Take your Time !!
Click to expand...
Click to collapse
Can you tell me which firmware build number you are running and if possible a screen shot of your device screen while booted to download mode?

Stuck in bootloop after flashing twrp
A750FXXU1ARK7

A7whatever said:
Stuck in bootloop after flashing twrp
A750FXXU1ARK7
Click to expand...
Click to collapse
Can you try this build, it's built with the kernel from the latest source available - A750FNXXU1ARIC.
Be aware OEM unlock must be enabled and you MUST boot to TWRP immediately after flashing with ODIN. Do not boot to the OS.
In TWRP immediately install Magisk.
https://androidfilehost.com/?fid=11410963190603874542

ashyx said:
Can you try this build, it's built with the kernel from the latest source available - A750FNXXU1ARIC.
Be aware OEM unlock must be enabled and you MUST boot to TWRP immediately after flashing with ODIN. Do not boot to the OS.
In TWRP immediately install Magisk.
Click to expand...
Click to collapse
Same bootloop at the Samsung screen
However i use heimdall not odin so I have to unpack the tar file and flash the recovery image. i also use it to flash the stock recovery and it works perfectly
Does using it make a difference?
Edit: my phone is A750FNXXU1ARK2
A750FXXU1ARK7 Was my build number

A7whatever said:
Same bootloop at the Samsung screen
However i use heimdall not odin so I have to unpack the tar file and flash the recovery image. i also use it to flash the stock recovery and it works perfectly
Does using it make a difference?
Edit: my phone is A750FNXXU1ARK2
A750FXXU1ARK7 Was my build number
Click to expand...
Click to collapse
Can you flash the bootloader from A750FNXXU1ARIC and see if it boots twrp?

ashyx said:
Can you flash the bootloader from A750FNXXU1ARIC and see if it boots twrp?
Click to expand...
Click to collapse
Flashed the old sboot.bin however got the same bootloop

A7whatever said:
Flashed the old sboot.bin however got the same bootloop
Click to expand...
Click to collapse
So just to be clear :
Immediately after flashing twrp you are forcing a boot to recovery directly from ODIN?

ashyx said:
So just to be clear :
Immediately after flashing twrp you are forcing a boot to recovery directly from ODIN?
Click to expand...
Click to collapse
Yes

A7whatever said:
Yes
Click to expand...
Click to collapse
Hmm looks like I'll have to take another look at the twrp config or kernel build.
If I pack the kernel into a boot image would you be willing to test if it boots?

Lenovo Z5s Update to ZUI 11.5 (Android 10)

Disclaimer: No guarantees. Follow at your own risk. I am not responsible for bricked phones.
Credits to 4PDA
Prerequisites:
Knowledge of OEM unlocking from Developer options, adb, and fastboot
Knowledge of QPST in case you encounter bootloop, so you can revert to a reliable stock ROM
Unlocked bootloader (from here)
1) Get your bootloader unlocked, if you haven't already.
- Visit https://www.zui.com/iunlock
- Enter the IMEI1 (Second number when you call *#06# with the phone)
- Enter the Device ID from the Bootloader/Fastboot (Hold VOL- and Power, while device is off)
- Enter your email and captcha and set the checkmark to acknowledge voiding your warranty.
- If you get an error saying that your IMEI1 is wrong, put in a sim card and wait a few hours. If it still doesn't work, write an email to [email protected]
- In the developer settings in android, enable usb debugging and oem unlock.
- Flash the sn.img file you receive with fastboot (again, hold vol- and power while the device is off). Command is 'fastboot flash unlock sn.img'. You need compatible usb drivers, qualcom drivers and adb/fastboot to do that. Use google or write me a PM if you have trouble with that.
- execute 'fastboot oem unlock-go'
- This allows you to use fastboot to flash custom system/boot/vendor/vbmeta images
Click to expand...
Click to collapse
@wzsx150's recovery-TWRP-3.3.1-1015-LENOVO_Z5S-CN-wzsx150.img MEGA Google Drive
@wzsx150's TWRP for Android 10 TWRP-3.3.2B-0508-LENOVO_Z5S-10.0-CN-wzsx150-fastboot.7z (extract the IMG file and flash using fastboot)
3) Now you can flash TWRP.
- Download ...
- Flash it from the Bootloader with 'fastboot flash recovery recovery-TWRP-3.3.1-1015-LENOVO_Z5S-CN-wzsx150.img'
- Press VOL UP / VOL DOWN to navigate to recovery.
Click to expand...
Click to collapse
11.3.169: L78071_11.3.169_DEV_FullOTA.zip
11.5.096 Update: ZUI_11.3.169_DEV_TO_ZUI_11.5.096_ST.zip
11.5.111 Update: ZUI_11.5.096_TO_ZUI_11.5.111_ST.zip
Other files, use at your own risk
Disable_Dm-Verity_ForceEncrypt_08.18.2019.zip
Official TWRP for jd2019
In recovery, Format data, then wipe Dalvik/ART Cache, Cache, Data
Reboot to recovery
Install in order, without rebooting, 11.3.169 -> 11.5.096 Update -> 11.5.111 Update.
Install Magisk 20.4
Install TWRP for Android 10 (above) using fastboot if the update replaces stock recovery after rebooting
Edited out from original
Wipe Data and flash Disable_Dm-Verity_ForceEncrypt_08.18.2019.zip
In order not to encrypt Data in the future, install Official TWRP immediately after installing updates. Install > Install Image > twrp-3.3.1-0-jd2019.img
Install GApps
Note: I do not know if the 11.5 update relocks the bootloader. It doesn't lock the bootloader.
I had bootloop from OpenGApps. 4PDA post advises to use BiTGApps. You can install Google Play Store from the built-in Lenovo App Center and that's what I did.
Haven't tried disabling dm-verity and forceencrypt.

Good job, my man, I'll check it out tonight and prepare ourselves an updateable package for people coming from any rom to avoid the hassle of going through all of that. As soon as I get it working will release a new TWRP for Android 10.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

carlshark said:
View attachment 5036881
Click to expand...
Click to collapse
Nice job man, so the update works as it should? I'm patching the images and will upload a full ota update to make it easier to move between Pie and 10. Regarding recoverys, did you test any twrp? Any decryption working? What about this official twrp, does it actually work? Thanks for the files man, this will make everything much easier

jacoghi said:
Nice job man, so the update works as it should? I'm patching the images and will upload a full ota update to make it easier to move between Pie and 10. Regarding recoverys, did you test any twrp? Any decryption working? What about this official twrp, does it actually work? Thanks for the files man, this will make everything much easier
Click to expand...
Click to collapse
I've been using the phone on 11.5.111 for a couple of days now.
I flashed both the 3.3.2 TWRP of @wzsx150 and the official TWRP and they seem to be working. I didn't turn off encryption so it seems to work well.
Happy to have helped in a small way. Thank you for your hard work!

links not works

vesdan said:
links not works
Click to expand...
Click to collapse
Thanks for the heads up, apparently the original poster removed the links. Will be uploading the ones I used.
Reuploading done.

Thank you very much

Thanks for the rom my friend.
Can you please upload the latest update cause i am rooted and it cannot be installed via the system.
Also guys ,does anyone knows if i can put the latest android 10 with multilanguage rom ?Thank you for everything ,i appreciate.

thx for the post, i am wondering if the ota will be avaliable, because the bootloader unlock site does not approve my imei number

sorry guys, i rushed and flashed the gapps and now facing a bootloop, i prepared qpst and a stock rom but i verz rom i am missing a content.xml file, can anyone please help me?

galardo_2 said:
sorry guys, i rushed and flashed the gapps and now facing a bootloop, i prepared qpst and a stock rom but i verz rom i am missing a content.xml file, can anyone please help me?
Click to expand...
Click to collapse
https://mega.nz/folder/PegDDQ7I#bmCCIt1lAWAe7ui_gkmwSQ/folder/fOAQ1QCa
here is many ROMS
Do not install gapps on ZUI !!!!

vesdan said:
https://mega.nz/folder/PegDDQ7I#bmCCIt1lAWAe7ui_gkmwSQ/folder/fOAQ1QCa
here is many ROMS
Do not install gapps on ZUI !!!!
Click to expand...
Click to collapse
but the qpst app need an aditional content.xml file, where can i get one

Install global via fastboot, all is included or in qfil ROM is all in zip file

vesdan said:
Install global via fastboot, all is included or in qfil ROM is all in zip file
Click to expand...
Click to collapse
I tried and failed again

i tired and failed again

galardo_2 said:
thx for the post, i am wondering if the ota will be avaliable, because the bootloader unlock site does not approve my imei number
Click to expand...
Click to collapse
I tried unlocking 2 Lenovo phones. The first attempt had sent me an email, but the second attempt did not. The unlock procedure went through though. So I tried changing the link provided in the first email http://cdn.zui.lenovomm.com/developer/lenovoboot/xxxxxxxx/sn.img (xxxxxxxx - serial number of phone) and it worked. This might not work for you though.
As for the OTA, I really am not sure... Probably

carlshark said:
I tried unlocking 2 Lenovo phones. The first attempt had sent me an email, but the second attempt did not. The unlock procedure went through though. So I tried changing the link provided in the first email http://cdn.zui.lenovomm.com/developer/lenovoboot/xxxxxxxx/sn.img (xxxxxxxx - serial number of phone) and it worked. This might not work for you though.
As for the OTA, I really am not sure... Probably
Click to expand...
Click to collapse
after a few atempts (3-4 days) the imei number got accepted, but now i have another problem as you can see, i flashed the gapps and now i have the bootloop and i dont have a clue how to undone it

hello friends I have all the updates installed, but it tells me that there is a new one, where can I download it?
On the other hand, what difference is there between installing by twrp and qfill?

galardo_2 said:
i tired and failed again
Click to expand...
Click to collapse
This is problem with program, drivers sahara. Try fastboot

How To Guide [GUIDE][REALME 8i][NARZO 50] Unlock Bootloader Flash TWRP and Root [RMX3151][RMX3286]

Hi Guys!
Since there is no deeptest.apk available for our device to unlock bootloader, we came up with another method to unlock bootloader unofficially!
In this guide I'll tell you how to unlock bootloader, root with magisk and flash TWRP on your Realme 8i/Narzo 50 (RMX3151/RMX3286)
Code:
/*
* This Guide is tested and working
* However I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about unlocking and flashing TWRP
* before flashing it! YOU are choosing to make these modifications.
*/
1. UNLOCKING BOOTLOADER:
Requirements
PC or Laptop
Internet connection
Realme 8i/Narzo 50
USB cable
Working Brain
Take a backup of your data since it'll be wiped
Go to About phone > Version and tap build number 7 times
Go to Settings > advanced settings > Developer options and turn on OEM unlocking and USB debugging
STEPS
Install Python from windows store
Install USBDk
Download this and extract : https://github.com/bkerler/mtkclient/archive/refs/heads/main.zip
Download vbmeta and patched boot image (Download for your respective version) in copy to the mtkclient-main folder
Now open command prompt or powershell in that folder
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now type pip3 install -r requirements.txt and hit enter
Now type python mtk e metadata,userdata,md_udc hit enter - This command wipes data
Then power off your phone and hold both volume buttons and connect usb cable (DON'T LEAVE THE BUTTONS, KEEP THEM HOLDING THROUGHOUT THE PROCESS) - This boots device into BROM mode
Now type python mtk da seccfg unlock This will unlock the bootloader (If you face waiting for device issue then unplug the device and plug in the device again with holding volume buttons, also don't leave the buttons)
After this unplug your phone and turn it on (It'll show your device dm verity corrupted and first boot might take 20-25 mins, don't panic)
Now your bootloader is unlocked
Due to realme's limitations you still can't access fastboot after unlocking via this method
2. ROOTING YOUR DEVICE:
Install This Magisk apk
Now in pc type python mtk w boot,vbmeta boot.patched,vbmeta.img.empty hit enter
Then power off your phone and connect usb while holding both volume buttons (and don't leave them)
Now disconnect and reboot phone
Now open magisk
3. FLASHING TWRP RECOVERY:
Download TWRP - From here
Download and install Flashify app
Open Flashify and grant root permission
Select Recovery image and install the twrp you have downloaded
After flashing is done click reboot now or you can reboot to recovery via magisk app
"Congrats Now we have working TWRP in our Realme 8i/Narzo 50"
Credits:
Me (@pritish1998) for TWRP, Unlock and Flashing guide
B Kerler fot MTKClient
Rohit for testing
Stock boot Images (to revert root)
If you face any issues contact me here

Thanks for the detailed guide, hope we get kernel sources soon..

sany.svenson said:
Добрый вечер.А как теперь заблокировать загрузчик,подскажите пожалуйста.
Click to expand...
Click to collapse
English is required, you can use your native language too, adding it to your post.
Inside the tool is provided a README.md file with basic instructions and usage. To relock bootloader you can use python mtk xflash seccfg lock just be careful to not relock it while running custom binaries, you have to return completely back to stock prior to do that.

After using boot.img from this topic wifi is dead! Now I need original boot to patch it. My firmware is A20. Somebody help!

DimaS_EKB said:
After using boot.img from this topic wifi is dead! Now I need original boot to patch it. My firmware is A20. Somebody help!
Click to expand...
Click to collapse
The provided boot image is from A30... Why are u still using A20?

I didn't know about A20 or A30 or anything. You should have mentioined this! Better off dump user's own boot.img and patch it with magisk. Now I have problems. It is good that I've found A20 firmware but it was not easy, I've lost a lot of time to read about firmwares, patching etc.

DimaS_EKB said:
I didn't know about A20 or A30 or anything. You should have mentioined this! Better off dump user's own boot.img and patch it with magisk. Now I have problems. It is good that I've found A20 firmware but it was not easy, I've lost a lot of time to read about firmwares, patching etc.
Click to expand...
Click to collapse
Download stock boot image from here I've saved them https://mega.nz/folder/BvpwibLB#lDDAbRG5SMKS4ucdj1dELg
Also there is nothing to mention at the time of making this guide almost everyone was updated to A.30, but no problem now I've updated the link for all patched boot images

recovered, thanks
now I'm updating to A32
what's next?
download your patched boot image for A32? and that's all?

DimaS_EKB said:
recovered, thanks
now I'm updating to A32
what's next?
download your patched boot image for A32? and that's all?
Click to expand...
Click to collapse
Yes

pritish1998 said:
Yes
Click to expand...
Click to collapse
Sorry but it appears I cannot update. I tried original and modified boot.img, also I installed original recovery. It doesn't help. The phone downloads the A32 firmware, reboots and cannot start recovery mode to update the firmware.

DimaS_EKB said:
Sorry but it appears I cannot update. I tried original and modified boot.img, also I installed original recovery. It doesn't help. The phone downloads the A32 firmware, reboots and cannot start recovery mode to update the firmware.
Click to expand...
Click to collapse
Flash stock boot, vbmeta and recovery then format data then reboot

If I flash stock vbmeta it cannot boot. Is that ok? Should I erase data anyway?

DimaS_EKB said:
If I flash stock vbmeta it cannot boot. Is that ok? Should I erase data anyway?
Click to expand...
Click to collapse
Yes

pritish1998 said:
Yes
Click to expand...
Click to collapse
Format data

Thanks! Now everything works fine!

pritish1998 said:
Download stock boot image from here I've saved them https://mega.nz/folder/BvpwibLB#lDDAbRG5SMKS4ucdj1dELg
Also there is nothing to mention at the time of making this guide almost everyone was updated to A.30, but no problem now I've updated the link for all patched boot images
Click to expand...
Click to collapse
how to flash stock boot image?

bobongros said:
how to flash stock boot image?
Click to expand...
Click to collapse
python mtk w boot boot.img

pritish1998 said:
python mtk w boot boot.img
Click to expand...
Click to collapse
can i dm you? please help me my phone is bricked

bobongros said:
can i dm you? please help me my phone is bricked
Click to expand...
Click to collapse
How did your phone brick?