Please help unbrick my phone - Huawei P10 Questions & Answers

I have bricked my phone after Magisk install fail.
I first unlocked bootloader succesfully
then i installed twrp succesfully
then i flashed magisk using twrp - this failed and sent device to erecovery. (which won't find package)
i used twrp to wipe data, now i was able to boot, and it installed like a fresh EMUI. However, almost all apps were broken- could not download themes/camera shut down etc.
To fix this, i wanted to restore to stock and did the following: download update package for my VTR-L09 of EMUI b175 (I was on b162 before), used Huawei Update Extractor to extract files and flashed BOOT.IMG, SYSTEM.IMG and RECOVERY.IMG. This was done without error.
Now my phone won't boot at all. I am stuck at the 'your device can't be trusted' screen. I cannot go into recovery. When I connect via USB, I hear the chime in Windows but I can't seem to connect with ADB.
What to do now?? Am I hard-bricked? I hope that anyone knows how to deal with my phone bricked like this. Please help me to solve this issue.
Best of wishes.
Edit: I am able to enter forced recovery, however updates fail at 5%.
I am also able to fastboot with USB, however I am unsure what to do next.

I unbricked my phone! Many thanks to who ah way and his solution found here: https://forum.xda-developers.com/p10/how-to/guide-unbricking-p10-using-hwota-windows-t3714416
:victory:

why are you doing it when you dont understand it?
You cannot flash part of B175 firmwar eover B162 firmware.. OMG.
use the HWOTa to go back to stock and please stop playing with the device without propper knowledge

Related

Stock recovery always fail

Hi everyone,
I am looking for the way to start this phone directly on the fastboot mode as it is softbricked and it doesn't recognise anything (i can't go on recovery, no matter which one) after I flash a stupid update.app of 500 mb
I think I have to flash system.img boot.img and recovery.img
Thanks in advance, it don't go on the fastboot by himself like he did before, after i flashed twrp
Edit: Found, vol - & power while wired to the computer. Gonna see why i can't access even the stock recovery
Press and hold power and vol(-) buttons ... long time. Of course first remember to connecting device to PC by USB. [emoji14]
Hundreds times...it was described on this forum. [emoji26]
Sent from my HUAWEI P7-L10 using Tapatalk
New question, I installed the B121 full stock, rom, kernel, everything like when i baught him first day, except of my unlocked BL.
Now, the stock recovery can't install ANY update.app it always write "FAIL" without getting any %, it just fail as it start. I can't find the way to resolve this.
And I got many questions,
Can the recovery of B121 install the B609 ROM?
Can the B609 install B121? I mean how is the retrocompatibility working with this device/recovery?
In a update.app you got many files, boot.img, system.img but also 3rdmodem.img hifi.img modem.img...
What are those files? Why am I not allowed to flash them? Why I could start my device without flashing every files? They aren't necessary? Or they are generated by the "base rom" constitued of boot/system/cust/recovery/userdata?
Also, do I need to be rooted or something to boot on twrp? I can't boot on any other recovery except from B121, even if i extract one from update.app 609...
Thanks in advance

P10 Bricked after bad TWRP, need help

Hi everyone.
I have a VTR-L09C119 that got bricked after formatting the data partition in TWRP. When I try flashing a debranded FULL-OTA rom I get into a bootloop, and the erecovery won't work (Online recovery won't start, Factory Reset goes into bootloop). And I can't get into TWRP anymore even after flashing it.
I tried putting the VTR-L09C432, VTR-L29C432 and the VTR-L09C605 with the HUAWEI Multi Tool with the Unbrick option, which didn't work.
Any idea how to get out of that mess?
EDIT: Ok I was able to get into TWRP thanks to THIS GUIDE. I'll try a debrand and report back.
I was able to rebrand to VTR-L29C432, the update for VTR-L09C119 doesn't seem available so I don't think I'll be able to get back into my stock rom. For those in the same boat, don't forget to unplug your phone when you want to get into TWRP, that's why I wasn't able to get back into it.

twrp on p9 problem

Hello everyone, I wanted to revert to stock from bluewei, i flashed stock rom via dload method, but now it just bootloops. so i wanted to install twrp again so i can flash stock through twrp or atleast flash bluewei again but every time i try to flash with fastboot flash recovery command it says "remote: command not allowed", even tho i have my bootloader unlocked (everytime i turn on my phone it shows the warning that it is unlocked).
now i cant install twrp, cant flash through hisuite (it says that my device is not supported, tried the trick with changing ip address and port, nothing) and i dont have a idea how to make my phone useful again
Please can someone help me? THANKS!
p.s. device is p9 L09

Huawei p9 EVA-L09 No fastboot/recovery access.

Hello friends, recently I saw a tutorial on YouTube how to remove the bootloader unlocking notice in Huawei, as a software update arrived for my EVA L09, I wanted to do everything from factory without root or recoverys to install it via ote. So I removed the twrp by the huawei recovery and followed all the steps that the man made and reset the development settings, then I worked in the ADB to re-lock the bootloader, after finishing the processes, my phone was restarted and I'm stuck in the bootloader logo of Huawei, I never step out of there. I wanted to enter the fastbot mode and I can not because it seems to be deleted, I do not know what happens because it does not enter the fastboot mode and only reboots again, nor do I have access to the normal recovery. I tried to use the volume method up + down and power button using the UPDATE.APP but there are no such methods, the phone is apparently clean. it only stays in the logo.
I took him to the technician and he told me to communicate to the support of Huawei because he did not know what to do, I would appreciate too much to help me please, because nowhere do I find something and you are the maximum.
thankfully
Updated thread title and moved to P9 Q&A. Hope this gets you the answers you're looking for.
There are good and proven tutorials here on XDA (XDA has its own search), not sure what did you find and follw from YouTube ( was it for proper cust, proper case of going back from root or custom ROM and which one to stock and which stock build, etc)
To unbrick, you have three options:
https://forum.xda-developers.com/sho...08&postcount=7
- free method but AFAIK it requires Fastboot working
Paid solutions:
https://www.dc-unlocker.com/DC-Phoen...epair-tutorial
https://funkyhuawei.club/plans
zgfg said:
There are good and proven tutorials here on XDA (XDA has its own search), not sure what did you find and follw from YouTube ( was it for proper cust, proper case of going back from root or custom ROM and which one to stock and which stock build, etc)
To unbrick, you have three options:
https://forum.xda-developers.com/sho...08&postcount=7
- free method but AFAIK it requires Fastboot working
Paid solutions:
https://www.dc-unlocker.com/DC-Phoen...epair-tutorial
https://funkyhuawei.club/plans
Click to expand...
Click to collapse
Hello friend, thank you for answering, what I did was the following https://www.youtube.com/watch?v=s9BZuywrRAw I had the original rom of android 7 and I got the update through the B398 ota but I had root and twrp, I wanted to leave everything in the factory by removing the twrp and replacing it with the huawei recovery and removing the root. When it was restarted, it never came back and I do not understand why I do not have a fastboot or recovery mode.
Thank you
It is not enough to say EVA-L09 and b398.
You must know what was exactly your original stock ROM (before you rooted), like was it EVA-L09c432b397 or what.
Then, there is very simple method to go back to the stock ROM you started from, say to c432b397, wherefrom you would then be able to accept OTA to b398...
It's all about flashing the correct HWOTA package through TWRP, and you would be back to your unrooted stock and back to your stock recovery:
https://forum.xda-developers.com/showpost.php?p=74913874&postcount=3
Unfortunately, now after the YouTube, you have no Androud, no TWRP, no fastboot...
Btw, unlocked Bootloader does not prevent OTA updates. It was only neederd to unroot and then to go back to stock recovery - both you simply get just by flashing the right HWOTA package.
Alternatively, you could have to unroot (SuperSU has its own option to remove root, for Magisk there is a ZIP package to uninstall Magisk), and to flash the original stock recovery - and you would be clean to accept OTA (although with Bootloader still unlocked).

Maybe I bricked my A2

Hi, after the installation of official TWRP my phone was stuck into the loading bar. I tried recover it following a guide but now when I turn it on it asks to perform a factory reset, maybe I didn't use the right rom version, I don't know. I think that this issue is fixable but I don'w know how. I can go into fastboot and recovery. I also unlocked the phone. Please help me, thanks.
On what version of ROM were you?
Download stock ROM of your version, extract boot.img from images folder, and flash boot.img via fastboot.
Did you flash twrp to the active partition? to the inactive partition? Do you know?
If you can get to fastboot, it's not bricked. I'd suggest, as you indicate you have the option to reset to factory, go ahead and do that. Trying to fix it when yer not sure what you've done so far, **may** end up with it actually being bricked.

Categories

Resources