Database Develop

[RECOVERY][ks01lte] TWRP 3.1.0-0 touch recovery with F2FS support [CLOSED UPDATES]

-- Team Win Recovery Project --​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Supported model ONLY ks01lte​
I'm sorry but my i9506 is definitely dead, who wants to use my source code to create new updates this is the guide:
(links below)
device > use branch cm-14.1_twrp
kernel > use branch cm-14.1-rc
android_bootable_recovery repo > rebase with official omni repo or cherry-pick my last two commit on top​
Team Win Recovery Project 3.x, or twrp for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
I built this recovery by using my cleaned source code for kernel and OmniRom for twrp.
If you find any bug or problem please reply below this thread or use the dedicated tab page "Bug Reports" over here.
Phone look:
Features:
MTP auto mounting for SD / External SD
Mass storage mounting for External SD
Usb OTG
Full SELinux support
Supported F2FS (system, data, cache partitions)
CPU temperature handled
Thermal control and Performance profiles are active by default
Backup/Restore tested with 4.4.2/5.1 TW original samsung rom and all CyanogenMod
Screen shot capture enabled (Volume (-) + Power) (saved in the "Picture" folder)
Charge-Led
Known problems:
-Samsung HW encryption does not work well, follow this steps to decrypt /data: (thanks Diapolo)
1 - In the initial dialog "Enter Password." press Cancel
2 - "Swipe to Allow Modifications"
3 - Go to "Mount" and select "System" partition
4 - Press "Decrypt Data" and on "Enter Password." dialog press Accept
Changelog:
This is the changelog of my TWRP versions releases, if you want read the original changelog of TWRP versions go to:
http://teamw.in/project/twrp2
CHANGELOG for 3.1.0-0 [04/04/2017]:
-Updated kernel
CHANGELOG for 3.0.3-0 [18/12/2016]:
-Updated kernel
-Fixed twrp screen off timeout problem
CHANGELOG for 3.0.2-0 [20/11/2016]:
-Switched to TWRP android-7.1 branch
-Builded with a new stable kernel for Nougat and CM-14.1
-Added /misc partition on fstab for the recovery commands (Nougat changes)
-Tried to add Samsung HW encryption, it does not seem to work well i think it's incomplete, in our stock rom missing some file
such as keystore.xx.so and firmware files such as keymaster.xxx
CHANGELOG for 3.0.2-0 [08/05/2016]:
-Fixed chargeled service
-Fixed SEANDROIDENFORCE warning at boot, again
-Some changes in the partitions parameters on fstab
CHANGELOG for 3.0.2-0 [07/05/2016]:
-Switched to TWRP android-6.0 branch
-Builded from cm-13.0 repo
-New kernel made by me with latest LP sources
CHANGELOG for 2.8.7.0 [01/08/2015]:
-Switched to TWRP android-5.1 branch
-Builded from cm-12.1 repo
-Updated kernel from cyanogenmod
-Fixed brightness slider
-Fixed SEANDROIDENFORCE warning at boot
CHANGELOG for 2.8.5.0 [15/02/2015]:
-Fixed problem when wiping Data partition in F2FS
CHANGELOG for 2.8.4.0 [07/02/2015]:
-Added rewrite of TWRP settings after a SD wipe (prevent lost settings)
-Fixed mount F2FS or others filesystems to system, data, cache partitions
-Updated with latest changes from source
CHANGELOG for 2.8.4.0 [24/01/2015]:
-Switched to TWRP android-5.0 branch
-Brightness slider still does not work (it's a kernel related problem)
CHANGELOG for 2.8.1.0 [24/01/2015]:
-Updated kernel from cyanogenmod
-Screen blink on boot is not longer present
-Brightness slider no longer work (it's a kernel related problem)
-Added chargeled - adapted for samsung devices
CHANGELOG for 2.8.1.0 [27/11/2014]:
-Enabled mass storage mounting for external sd
-Fixed MTP mounting without external sd
CHANGELOG for 2.8.1.0:
-Initial TWRP release for I9506 (ks01lte)
How to do for install it:
FIRST INSTALL FROM ODIN (v3.07 or higher):
-Download twrp .TAR.MD5 file.
-Go to download mode (Volume down + Home + Power)
-Open Odin and check AutoReboot and F.Reset Time checkboxes are selected, also Re-Partition it NOT selected.
-Click on AP (PDA) and select the downloaded twrp recovery tar.md5 file.
-Check if all options are corrects, and press Start.
-Once the installation process complete, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect it from the computer.
-Some users has found problems with previous procedure: in this unlucky situation, when phone reboot and the logo (i9506 Samsung S4 Galaxy) appear, pull out the battery. Don't panic, the logo is there for several seconds. The installation process should be finalized now. There will be no PASS status in Odin. Put back the battery in the phone and try to boot straight to recovery.
UPGRADE YOUR TWRP:
-Download twrp .ZIP file.
-Copy the recovery zip file in the internal SD or external SD.
-Go to recovery mode (Volume up + Home + Power)
-Touch the INSTALL button.
-Select the appropriate SD
-Select the twrp file copied previously and slide to flash.
-Press back some times and reboot.
DOWNLOAD:
You can dowload the current version from this folder, you will find the flashable zip and tar version.
CLICK HERE TO GET DOWNLOAD FOLDER
To download Odin go here: samsungodin.com
SOURCES:
TWRP Source: https://github.com/omnirom/android_bootable_recovery
Kernel Source: https://github.com/CastagnaIT/android_kernel_samsung_ks01lte
Device Source: https://github.com/CastagnaIT/android_device_samsung_ks01lte
Thanks to: CyanogenMod, OmniRom Team, TWRP Team, Dees_Troy, Solk2, DualJoe​
XDA:DevDB Information
TWRP, Tool/Utility for the Samsung Galaxy S4
Contributors
CastagnaIT, smeroni68
Version Information
Status: Stable
Current Stable Version: v3.1.0-0
Stable Release Date: 2017-04-04
Created 2014-11-16
Last Updated 2017-07-15

Thank you! It works great!
Sent from my Galaxy S4 LTE-A [GT-I9506] using Settings app

I've trayed stock recovery version. It doesn't work, there is something wrong with "footer"?
Signature verification failed.
I have the latest stock NEE firmware.
Wysłane z mojego GT-I9506

checking in the next days, probably the stock recovery isn't compatible with the classic signature, for now use odin

Your current filename TWRP_2.8.1.0_ks01lte_20141115.tar.md5 won't get accepted by Odin 3.09. It should be TWRP_2.8.1.0_ks01lte.tar.md5 as generated by md5sum (that includes/binds filename as well). Or just omit md5sum step completely. Its not mandatory.
Edit: Looks like forum database has been set back (and so is your 1st post). One fellow guy is missing again.

working perfectly for me thanks
Sent from my GT-I9506 using XDA Free mobile app

Fixed files updated from CIT... md5 corrected...

When I'm trying to root my I9506 it tells me it failed to verify footer. I have tried keymaster, PhilZ touch and ROOT_E330S_I9506_v2 - it won't root the phone. And since this goes on, I cannot use Odin to flash neither TWRP or CWM (specified for I9506). I really hope for some help for this, as it bugs me really hard.

nydxlil said:
When I'm trying to root my I9506 it tells me it failed to verify footer. I have tried keymaster, PhilZ touch and ROOT_E330S_I9506_v2 - it won't root the phone. And since this goes on, I cannot use Odin to flash neither TWRP or CWM (specified for I9506). I really hope for some help for this, as it bugs me really hard.
Click to expand...
Click to collapse
Du får ikke root ved at flashe recovery... Du skal flashe en version (som svarer til din firmware version) af AutoRoot fra denne tråd http://forum.xda-developers.com/showthread.php?t=2597058

morten82 said:
Du får ikke root ved at flashe recovery... Du skal flashe en version (som svarer til din firmware version) af AutoRoot fra denne tråd http://forum.xda-developers.com/showthread.php?t=2597058
Click to expand...
Click to collapse
Så har jeg åbenbart fuldstændig misforstået de guides der er. Alle de forskellige roots jeg har fundet har ikke været signed så dem har jeg ikke kunne bruge Jeg prøver en af de pre-rooted rom'er og ser om de ikke kan "do the magic" senere i dag, BBL med svar. På forhånd tak

ENGLISH PLEASE!! XDA Rules!! Thanks

Kernel seandroid enforcing?
Hi. I have flasch tvrp recovery and it works perfect.
Only thing is this message on boot screen KERNEL IS SEANDROID ENFORCING
NO WARANTY BIT.
what its this?
Thanks for answers.
Sorry for my bad English

Rado G said:
Hi. I have flasch tvrp recovery and it works perfect.
Only thing is this message on boot screen KERNEL IS SEANDROID ENFORCING
NO WARANTY BIT.
what its this?
Thanks for answers.
Sorry for my bad English
Click to expand...
Click to collapse
Not stock recovery give knox 0x1 broken... the message is reporting this... it is irreversibile... That's the rule...
Inviato dal mio GT-I9505 utilizzando Tapatalk

--new updates--
Only a quick update, the most important i fixed the MTP mount for internal storage when external SD isn't present, that before seemed not work properly.
All the changelog below.
CHANGELOG for 2.8.1.0 [27/11/2014]:
-Enabled mass storage mounting for external sd (CastagnaIT)
-Fixed MTP mounting without external sd (CastagnaIT)
-Various other bugfixes and tweaks by twrp team
Click to expand...
Click to collapse
Bye
CastagnaIT

Thanks for the update.
So far, working fine here.

CastagnaIT said:
Only a quick update, the most important i fixed the MTP mount for internal storage when external SD isn't present, that before seemed not work properly.
All the changelog below.
Bye
CastagnaIT
Click to expand...
Click to collapse
Thank you for the update! [emoji106]

WOW
Super! Works pretty good on I9506 with rooted Stock Rom 4.4.2 NNE ! Big thanks from Germany!:good:

Hey,
Recently bought Galaxy S4 4g+ (i9506) and now trying to flash the latest TWRP (TWRP_2.8.1.0_ks01lte_20141127.tar.md5) with Odin 3.07, but it doesn't seem to work? Odin completes the flash just fine and gives the green "PASS" just fine but when I boot into recovery it's just the default one. Also Knox Warranty flag isn't triggered. What should I do to be able to flash TWRP (or any custom recovery)?
Thanks.
---------- Post added at 06:56 PM ---------- Previous post was at 06:02 PM ----------
enkku said:
Hey,
Recently bought Galaxy S4 4g+ (i9506) and now trying to flash the latest TWRP (TWRP_2.8.1.0_ks01lte_20141127.tar.md5) with Odin 3.07, but it doesn't seem to work? Odin completes the flash just fine and gives the green "PASS" just fine but when I boot into recovery it's just the default one. Also Knox Warranty flag isn't triggered. What should I do to be able to flash TWRP (or any custom recovery)?
Thanks.
Click to expand...
Click to collapse
Nevermind, battery pull trick did it and got it installed now (removed battery on Galaxy S4 logo after it auto reboots after flashing TWRP with Odin).

When trying to flash ROM (CM12 2.4.1 I9506) it seems like it can't install/mount/unmount the /data, which results in the the recovery prompts that OS is not installed.
I've tried both TWRP and PhilZ (in PhilZ i get error: "unmount of /data failed; no such volume").
I'm desperate for a solution! Thanks in advance!

Thanks for this versions. I can instal cm12 lollipop with. Thanks

[ROM][H870][Stock] OPEN EU LG-H870 10L ROM

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LG-H870 OPEN EU 10L ROM​Hello everyone
This is my first work in things like Android.
I am just about to learn how to develop and port for Android.
This zip is created from the original KDZ. I changed the Boot.img, so you do not have to reinstall TWRP.
Later I will create other zips without modifications so you can flash
the ROM without TWRP/Root to be absolutely stock and one with Aroma installer or something,
so that you can choose between Supersu and Magisk.
Next I will build a stock Custom ROM with some tweaks and mods. :good:
If I have done this I will try to develop a fully Custom ROM with various ports and/or
mods made by me if I can do it :fingers-crossed:. I would also like to try to port LineageOS for our sexy device.
Sorry for my bad english i'm out of practice ​
Features​ *Stock build made from official KDZ
*Stock Build.prop
*Unrooted
*Boot.img modified to keep TWRP
*Remove dm-verity
*Remove forceencrypt​Installation​ What you need​ *Unlocked Bootloader [How to do]
*Working TWRP installed [Link to official TWRP]
*When you need Root, Latest SuperSU [Download] or Magisk [Download]
*H870 10L OPEN EU (TWRP).zip [Download]​
How to install​ Reboot to recovery using button combo or reboot app (need root)
Backup Dalvik,ART, Cache, System & Data (include not your internal memory) and Boot
in to your external sd or copy the backup from internal sd to your PC!
For clean install: Wipe Dalvik/ART, Cache, System and Data (Recommend)
You can also keep your data by dirty flashing the zip.
Flash H870 10L OPEN EU (TWRP).zip
Flash SuperSU or Magisk zip when you need root
Reboot System
At the first time you boot to system, it can be TWRP says No OS installed. You can ignore it.
If TWRP asks if you want to install SU, hit no​
Rom Version
Android Version: 7.0
Android security patch level: June 1, 2017
Build date: June 22, 2017
Build number: NRD90U
MD5 SUMS:
Code:
[SIZE="4"][B][COLOR="Black"]
boot.img 92335edb10b951f221da1aab0b1ad2c3
modem.img c095697d700c0b08408142f44a9f7cdf
OP_OPEN_EU.img 2519a561fb581fae313183ef2c8b5c64
persist.img 5715f5a60eba5a41b4906d8ba6bbcfad
rct.img 15bc82584049ec3a7c62d921c2897267
system.img f21c639430b366d4e8c7b9a0ff93efc7
aboot.img 601548da68fdfa7a02d8db4a6e90d5db
apdp.img 23ca67412df6c59c2cbe5d98e45037c1
cmnlib.img 7eda51ce363f36baa39b5e886426ec8f
cmnlib64.img 7007c9dd3da6a45f0466688c3ca5126c
devcfg.img 63f2a9180a51e1788610c4e18de4ea78
factory.img 15bc82584049ec3a7c62d921c2897267
hyp.img 11a14e0b9e07f6c96b4f018b53cb33b6
keymaster.img 7efa6121ca4abe49b897f7fd3ccc2d66
laf.img 9199b8cc446f8fce5fb98a0904977084
msadp.img 0dada3ac5e1fdbcf337cbb3c8e27d5e5
pmic.img 6625757b0a85af9dbd1965a01885bc5d
raw_resources.img f9aa74c82c39fdd96220406c03419713
rpm.img 75016588a3eab3509f3310b2f2f54dba
sec.img 628756d1475c7e6ffa2f974c63261bf6
tz.img 950dfdba97fd496bb0ae4e97b5163bd3
xbl.img 0422d1b7f47ff5bfcc1da94cec11e14e[/COLOR][/B][/SIZE]
Credits:
@autoprime
@J0SH1X's
@Chainfire
@topjohnwu
@Me :laugh:
Don´t forget to hit the thanks-button if you like my work! :good:
You want to help me with a [donation?] Feel free to make it.​

Awsome mate! Continue this good work!

I will keep that in mind. Thank you

westwood24 said:
LG-H870 OPEN EU 10L Rom​ Hello everyone
This is my first work in things like android.
I am just about to learn how to develop and port for android.
This zip is from the original KDZ. I have changed the boot.img so that you do not have to reinstall TWRP. Later I will still create zip's without modification and with an aroma installer so you can choose between supersu and magisk.
Next I will build a stock rom with tweaks and mods
If I have done this I will try to develop a costum rom or port lineageOS to our device.​Features​ *Stock build made from official KDZ
*Stock Build.prop
*Unrooted
*Boot.img modified to keep TWRP
*Remove dm-verity
*Remove forceencrypt​Installation​ What you need​ *Unlocked Bootloader [How to do]
*Working TWRP installed [Link to official TWRP]
*When you need Root, Latest SuperSU Download or Magisk of your choice V12 stable # V13 beta
*H870 10L OPEN EU (TWRP).zip [Download]​
How to install​ Reboot to recovery using button combo or reboot app
Backup Dalvik,ART, Cache, System & Data (include not your internal memory) and Boot
Fullwipe (Dalvik,ART, Cache, System & Data)
Flash H870 10L OPEN EU (TWRP).zip
Flash SuperSU or Magisk zip when you need root
Reboot System
At the first time you boot to system, it can be TWRP says No OS installed. You can ignore it. If TWRP asks if you want to install SU, hit no it​
Rom Version
Android Version: 7.0
Android security patch level: June 1, 2017
Build date: June 22, 2017
Build number: NRD90U
MD5 SUMS:
boot.img 92335edb10b951f221da1aab0b1ad2c3
modem.img c095697d700c0b08408142f44a9f7cdf
OP_OPEN_EU.img 2519a561fb581fae313183ef2c8b5c64
persist.img 5715f5a60eba5a41b4906d8ba6bbcfad
rct.img 15bc82584049ec3a7c62d921c2897267
system.img f21c639430b366d4e8c7b9a0ff93efc7
aboot.img 601548da68fdfa7a02d8db4a6e90d5db
apdp.img 23ca67412df6c59c2cbe5d98e45037c1
cmnlib.img 7eda51ce363f36baa39b5e886426ec8f
cmnlib64.img 7007c9dd3da6a45f0466688c3ca5126c
devcfg.img 63f2a9180a51e1788610c4e18de4ea78
factory.img 15bc82584049ec3a7c62d921c2897267
hyp.img 11a14e0b9e07f6c96b4f018b53cb33b6
keymaster.img 7efa6121ca4abe49b897f7fd3ccc2d66
laf.img 9199b8cc446f8fce5fb98a0904977084
msadp.img 0dada3ac5e1fdbcf337cbb3c8e27d5e5
pmic.img 6625757b0a85af9dbd1965a01885bc5d
raw_resources.img f9aa74c82c39fdd96220406c03419713
rpm.img 75016588a3eab3509f3310b2f2f54dba
sec.img 628756d1475c7e6ffa2f974c63261bf6
tz.img 950dfdba97fd496bb0ae4e97b5163bd3
xbl.img 0422d1b7f47ff5bfcc1da94cec11e14e​
Credits:
@autoprime
@J0SH1X's
@Chainfire
@topjohnwu
Click to expand...
Click to collapse
actually su is excluded from twrp because NO LOVE FOR THE WICKED

J0SH1X said:
actually su is excluded from twrp because NO LOVE FOR THE WICKED
Click to expand...
Click to collapse
But the people who use a different recovery, could get the message (If TWRP asks if you want to install SU, hit no).

Hi,
thank you for you work!
So, is it confirmed that you can dirty flash over 10f without need to wipe?
Thanks

Sure I've tried it, you should still make a backup if something goes wrong

westwood24 said:
But the people who use a different recovery, could get the message (If TWRP asks if you want to install SU, hit no).
Click to expand...
Click to collapse
I already run official twrp with SuperSU 2.82 with issue on 10f firmware, can I just flash 10l with only cache/dalvik wipe?

jimbomodder said:
I already run official twrp with SuperSU 2.82 with issue on 10f firmware, can I just flash 10l with only cache/dalvik wipe?
Click to expand...
Click to collapse
You mean the Supersu remains? I have not tested now. If you mean that, and SuperSU is not installed, then reboot recovery and flash newest SuperSU.zip

@westwood24 thanks for this, I simply flashed in recovery, then reflashed SuperSU as I had before and now my G6 is up to date. ??
Sent from my Nexus 6 using XDA-Developers Legacy app

Xposed
Hello !
I know it's too early yet, but, it would be really cool to have a stock based rom, xposed and 3minit battery compatible. :good::good::good:
sorry for my English

3minit should work, I'll check it, but xposed-framework is unfortunately not compatible yet

Everything works perfect here ? i would apreciate the 3minit support , thnx for the good work
Sent from my LG-H870 using XDA-Developers Legacy app

Thank you very much. I really appreciate the great work.
And dirty flash works too, I can confirm that.

Samsung Gear App does not work (not compatible) and if you install the apk manually, it does not connect to the Gear S3 (simply does not recognize it). BT is working fine and does "see" the Gear S3.
Maybe related to "root".

dragon-tmd said:
Samsung Gear App does not work (not compatible) and if you install the apk manually, it does not connect to the Gear S3 (simply does not recognize it). BT is working fine and does "see" the Gear S3.
Maybe related to "root".
Click to expand...
Click to collapse
How did you flash the zip?
This zip is absolutly stock.
i have test gear app from store
and it installs it and works for me.
root with magisk!
Edit: my g-watch working also and connected

westwood24 said:
How did you flash the zip?
This zip is absolutly stock.
i have test gear app from store
and it installs it and works for me.
root with magisk
Click to expand...
Click to collapse
I'm still thinking about whether I'm rooting. The main reason is the often described incompatibility with Magisk. As I see it works with you. Does Magisk hide also work with banking apps?

pittrich67 said:
I'm still thinking about whether I'm rooting. The main reason is the often described incompatibility with Magisk. As I see it works with you. Does Magisk hide also work with banking apps?
Click to expand...
Click to collapse
of course. you must enable magisk hide and
then choose in magisk hide the app you need.

westwood24 said:
of course. you must enable magisk hide and
then choose in magisk hide the app you need.
Click to expand...
Click to collapse
Have there problems with TWRP. One always reads from mount errors. Also the fact that the bootloader can no longer be closed makes me hesitate. Until now, I've always bought Nexus devices. There was never problem with closing the BL before I got it Had sold.

TWRP works well if you do the tutorial correct. The bootloader is currently not able to close, but is only a question of timei think

[ROM][US997][Stock] LG-US997 17A ROM

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LG-US997 17A Rom​Hello everyone
LG rolled out a new update to 17A
Changelog from LG:
Code:
[Feature]
- Phone usability and functionality has been further improved
Changelog what I noticed and found:
Code:
*New Security Patch
*Do not have the Phone say it to me an
i will edit it :p
This zip is created from the original KDZ. I changed the Boot.img, so you do not have to reinstall TWRP. . .
I had made this for users who can not get ota's because they have Custom Recovery / Root installed
Sorry for my bad english i'm out of practice ​Features​ *Stock build made from official KDZ
*Stock Build.prop
*Unrooted
*Boot.img modified to keep TWRP
*Remove dm-verity
*Remove forceencrypt​Installation​ What you need​ *Unlocked Bootloader [How to do]
*Working TWRP installed [Link to unofficial TWRP]
*When you need Root, Latest SuperSU [Download] or Magisk [Download]
*US997 17A (TWRP).zip [Download]​
How to install​ Reboot to recovery using button combo or reboot app (need root)
Backup Dalvik,ART, Cache, System & Data (include not your internal memory) and Boot
in to your external sd or copy the backup from internal sd to your PC!
For clean install: Wipe Dalvik/ART, Cache, System and Data (Recommend)
You can also keep your data by dirty flashing the zip.
Flash US997 17A (TWRP).zip
Flash SuperSU or Magisk zip when you need root
Reboot System
At the first time you boot to system, it can be TWRP says No OS installed. You can ignore it.
If TWRP asks if you want to install SU, hit no​
Here you can find my other [Downloads.] There are IMG´s, KDZ´s and more!​
Rom Version
Android Version: 7.0
Android security patch level: 2018-01-01
Build date: 2018-01-04
Build number: NRD90U
Product model: LGUS997
MD5 SUMS:
Code:
[SIZE="4"][B][COLOR="Black"]
boot.img 707beea1c5015fadaee2254707bfc6ae
modem.img 0d5d7c7188fa162e70a77d0f3f5dd6e4
persist.img 63c5ba281159f22b0fd20979fb197190
rct.img 15bc82584049ec3a7c62d921c2897267
system.img e8bd34896b5b634b637346ad6bb9d085
aboot.img f0939946543a9742f34c5ddd60fcbf66
apdp.img 4055e51f849f725c60c869ebc7a1479f
cmnlib.img ac9bffdbb1ecda4f804e5382598c091a
cmnlib64.img 82595b03cb24ba81a404550e047bcca5
devcfg.img ff779136ffd03f3769a515da23b114b6
factory.img 15bc82584049ec3a7c62d921c2897267
hyp.img b3f4dbe64fe64f739f55cded4936c9e3
keymaster.img a9424b1b15d6e9b959d3817ab5faf8b7
laf.img 5847de1fcfaf15595ef9ad6ea0253f9b
msadp.img 5038a3e079a0c0d13fb2df601af6e7fc
pmic.img 4bf032502d8633bb892dbc58c63e031a
raw_resources.img 579715447bb6fab9ec91403542eb6c80
rpm.img fe6f10c14bf27ea539503e29191deb1b
sec.img 628756d1475c7e6ffa2f974c63261bf6
tz.img 2ad066a14c7c83f01cee651aa0b24bd9
xbl.img d811c2afd65698ab62615fd7b9971b0c[/COLOR][/B][/SIZE]
Credits:
@autoprime
@nima0003
@Chainfire
@topjohnwu
@Me :laugh:
Don´t forget to hit the thanks-button if you like my work! :good:
You want to help me with a [donation?] Feel free to make it.​

Confirmed working!
A few roadbumps, though. I came from the TWRP build that @nima0003 and @zefie compiled. I flashed the ROM after wiping Dalvik/ART, Cache, System and Data but once I rebooted, I was back in TWRP! This happened over and over again, even after a format and full restore of a good backup. After several failed attempts to get into Download Mode to flash the stock KDZ (button combo just wouldn't work) I decided to just go into fastboot and use 'fastboot flash recovery x.img' on the TWRP recovery image(older version) I used to initially get custom recovery, after that I was able to flash the ROM and get into Android.
It may be an issue with the boot.img having TWRP preloaded, but I'm not sure if I somehow overwrote something. Hopefully this helps someone!
Friendly reminder to quadruple backup, Titanium Backup and LG Backup & Restore made it a whole lot less of a hassle than it could've been.

Any particularly noticeable changes with this update? I'm asking because I got it over OTA, and I wanna know whether or not it's worth updating. How's battery life, performance? It's a 771MB update, if I'm not mistaken, which is not a small package. Any changes in the interface?

duff105 said:
Any particularly noticeable changes with this update? I'm asking because I got it over OTA, and I wanna know whether or not it's worth updating. How's battery life, performance? It's a 771MB update, if I'm not mistaken, which is not a small package. Any changes in the interface?
Click to expand...
Click to collapse
People have been complaining about lag from the OTA update on forums, but I myself have not noticed any changes. I may be glossing over it and assuming that it's standard Android lag. I updated mostly for the latest security patch and the OTA update notification was bothering me. If anyone who has better sensitivity to lag can test it, that would be appreciated.

So I updated 2 days ago or so, and it's just like you've said. No changes, and no unusual lags. Which is great, I guess, means they havent forgotten about G6 users.

westwood24 said:
LG-US997 17A Rom​Hello everyone
LG rolled out a new update to 17A
Changelog from LG:
Code:
[Feature]
- Phone usability and functionality has been further improved
Changelog what I noticed and found:
Code:
*New Security Patch
*Do not have the Phone say it to me an
i will edit it :p
This zip is created from the original KDZ. I changed the Boot.img, so you do not have to reinstall TWRP. . .
I had made this for users who can not get ota's because they have Custom Recovery / Root installed
Sorry for my bad english i'm out of practice ​Features​ *Stock build made from official KDZ
*Stock Build.prop
*Unrooted
*Boot.img modified to keep TWRP
*Remove dm-verity
*Remove forceencrypt​Installation​ What you need​ *Unlocked Bootloader [How to do]
*Working TWRP installed [Link to unofficial TWRP]
*When you need Root, Latest SuperSU [Download] or Magisk [Download]
*US997 17A (TWRP).zip [Download]​
How to install​ Reboot to recovery using button combo or reboot app (need root)
Backup Dalvik,ART, Cache, System & Data (include not your internal memory) and Boot
in to your external sd or copy the backup from internal sd to your PC!
For clean install: Wipe Dalvik/ART, Cache, System and Data (Recommend)
You can also keep your data by dirty flashing the zip.
Flash US997 17A (TWRP).zip
Flash SuperSU or Magisk zip when you need root
Reboot System
At the first time you boot to system, it can be TWRP says No OS installed. You can ignore it.
If TWRP asks if you want to install SU, hit no​
Here you can find my other [Downloads.] There are IMG´s, KDZ´s and more!​
Rom Version
Android Version: 7.0
Android security patch level: 2018-01-01
Build date: 2018-01-04
Build number: NRD90U
Product model: LGUS997
MD5 SUMS:
Code:
[SIZE="4"][B][COLOR="Black"]
boot.img 707beea1c5015fadaee2254707bfc6ae
modem.img 0d5d7c7188fa162e70a77d0f3f5dd6e4
persist.img 63c5ba281159f22b0fd20979fb197190
rct.img 15bc82584049ec3a7c62d921c2897267
system.img e8bd34896b5b634b637346ad6bb9d085
aboot.img f0939946543a9742f34c5ddd60fcbf66
apdp.img 4055e51f849f725c60c869ebc7a1479f
cmnlib.img ac9bffdbb1ecda4f804e5382598c091a
cmnlib64.img 82595b03cb24ba81a404550e047bcca5
devcfg.img ff779136ffd03f3769a515da23b114b6
factory.img 15bc82584049ec3a7c62d921c2897267
hyp.img b3f4dbe64fe64f739f55cded4936c9e3
keymaster.img a9424b1b15d6e9b959d3817ab5faf8b7
laf.img 5847de1fcfaf15595ef9ad6ea0253f9b
msadp.img 5038a3e079a0c0d13fb2df601af6e7fc
pmic.img 4bf032502d8633bb892dbc58c63e031a
raw_resources.img 579715447bb6fab9ec91403542eb6c80
rpm.img fe6f10c14bf27ea539503e29191deb1b
sec.img 628756d1475c7e6ffa2f974c63261bf6
tz.img 2ad066a14c7c83f01cee651aa0b24bd9
xbl.img d811c2afd65698ab62615fd7b9971b0c[/COLOR][/B][/SIZE]
Credits:
@autoprime
@nima0003
@Chainfire
@topjohnwu
@Me :laugh:
Don´t forget to hit the thanks-button if you like my work! :good:
You want to help me with a [donation?] Feel free to make it.​
Click to expand...
Click to collapse
Hello! My name is Tuan living in Vietnam. I can describe some money to buy the LG G6 US997. I followed the instructions on XDA to unlock the Bootloader successfully. Now I want to install TWRP Recovery to run Fulmics 3.5 rom. But difficult to try to try. Please give me a guide that can actually install TWRP Recovery. Thank you very much.

Awesome! Thanks! How do I put xposed on it without getting into a bootloop?

DAXX said:
Awesome! Thanks! How do I put xposed on it without getting into a bootloop?
Click to expand...
Click to collapse
There is a post here by rovo89 somewhere about the bootloop. You have to literally have wait for 15-20 minutes while it's trying to boot up. I've done it myself, and seems like it won't boot up but it will. Just make sure your battery is full when doing it.
Sent from my LG G6 using XDA Labs

jurington said:
There is a post here by rovo89 somewhere about the bootloop. You have to literally have wait for 15-20 minutes while it's trying to boot up. I've done it myself, and seems like it won't boot up but it will. Just make sure your battery is full when doing it.
Click to expand...
Click to collapse
I did that and it worked like a charm! It was very confusing at first. Sucks that you have to wait though. Thanks for your reply!

DAXX said:
I did that and it worked like a charm! It was very confusing at first. Sucks that you have to wait though. Thanks for your reply!
Click to expand...
Click to collapse
Awesome!! Yeah I tried about 4 or 5 times thinking it was in a infinite bootloop until I found out you had to wait a long time. Cheers man
Sent from my LG G6 using XDA Labs

Nice job...just dumped a custom Rom and flashed this, then installed SU...simple and smooth, Thanks!!

Thanks, do you know where I can find the stock boot.img? Or the entire KDZ without it modified?

cory733 said:
Thanks, do you know where I can find the stock boot.img? Or the entire KDZ without it modified?
Click to expand...
Click to collapse
I can't find a hosted 17A stock boot.img, the most recent I can find is the 15A hosted on @westwood24 's AndroidFileHost here. As for the KDZ the only one I can find is the 16A hosted by @zefie here.

Just installed , rooted , and xposed.
Very nice !!! I like !!!

eridnis said:
I can't find a hosted 17A stock boot.img, the most recent I can find is the 15A hosted on @westwood24 's AndroidFileHost here. As for the KDZ the only one I can find is the 16A hosted by @zefie here.
Click to expand...
Click to collapse
In case anyone is looking, this is where I found the stock firmware that I used
https://lg-firmwares.com/lg-us997-firmwares/

Anyone else having trouble downloading this file? The download hangs at 81 % for me and I have tried multiple times.

Can anyone confirm dirty flash of this update working? I'm currently at 12a if that matters.

eridnis said:
I can't find a hosted 17A stock boot.img, the most recent I can find is the 15A hosted on @westwood24 's AndroidFileHost here. As for the KDZ the only one I can find is the 16A hosted by @zefie here.
Click to expand...
Click to collapse
The strange part is, if you flash the 16a KDZ, then do a update request either on the phone or with LG Bridge, it will report there is no newer version. So I am not sure what happened to 17a, maybe LG revoked it?

Aw, crud!
I spent all day setting this up and advanced calling does not work for US997 and Verizon???
ADVANCED CALLING is greyed out in main settings menu and the test menu eventually comes up, but when PHONE is selected, an error message states that function is not available on this device.
Is there a way to fastboot flash just the modems, like I could on a Motorola?
If not, do I flash official firmware from LG with LGUP or fastboot?

SIM card is not recognized

Hello
The mobile had the following error "Encryption unscuccessfull"
It was no longer possible to install a ROM.
Only after the in
mount and Storge Menu the partitions have been reformatted.
After that, the modem zip was still installed without success
Rome only runs the sim card is not recognized.
SIM card works in other mobile phone
Hardware error?
S III i9305
ClockworkMod Recovery V6.0.4.7
Rome
lineage-14.1
or
RR-N v5.8.5

@uzzoo If my reply sounds a bit "unstructired" I apologise but I'm not convinced if I completely grasp the whole issue.
In Settings => About phone, is the modem/baseband indicated by its version or does it states "unknown"?
I urgently suggest to replace your current recovery by TWRP 3.0.2-1! And please only use this version; any later one will again make trouble.
You are mentioning "Encryption unscuccessful", Did you try to encrypt your device? If I correctly remember RR (and I believe same applies to LOS) does not support encryption. Maybe @rodman01 can confirm?
Last but not least: The issue "SIM not recognised" was already reported several times in different threads and solutions provided. I assume your consent that I don't conduct the searches for you but I suggest to search these threads:
https://forum.xda-developers.com/ga...m-resurrection-remix-4-4-2-kitkat-v5-t2704828
https://forum.xda-developers.com/ga...resurrection-remix-4-4-2-kitkat-v5-1-t2950817
https://forum.xda-developers.com/ga...m-unofficial-lineageos-14-1-gt-i9305-t3542012

Yes encryption is not working with at least the latest RR versions on our phone.
Not sure whether it had been working on any not samsung stock based custom rom for the i9305. I never tested it or dived deeper in the topic to get it to work, so this might be not a very reliable post .

Have the phone with the error message encrypted.
Official LineageOS 14.1 Samsung Galaxy S III LTE GT-I9305
last version is running
modem / baseband will display "unknown"
Will continue with the following instructions.
1) Install TWRP:
TWRP 3.2.3-0 fails installing .zips here, 3.0.2-1 is fine.
https://dl.twrp.me/i9305/twrp-3.0.2-1-i9305.img.html
- Boot to bootloader (Power, Volume Down, Home)
As I'm running linux on my PC, I'm using heimdall for flashing:
- sudo heimdall flash --no-reboot --RECOVERY twrp-3.0.2-1-i9305.img
2) For a clean start, wipe everything in TWRP first:
- Boot to TWRP (Power, Volume Up, Home)
- Format data
- Mount everything but EFS and MicroSD, including System, not read-only
- Advanced wipe: Wipe everything but MicroSD card
- Reboot to download
3) Install stock ROM:
I found the current stock ROM here:
https://updato.com/firmware-archive-...r=desc&exact=1
At least for my country (Germany, DBT) the appropriate modem file ...UFOA1 is included!
- Boot to bootloader
- sudo heimdall flash --no-reboot --BOOTLOADER sboot.bin --TZSW tz.img --BOOT boot.img --TOMBSTONES tombstones.img --CACHE cache.img --RADIO modem.bin --RECOVERY recovery.img --SYSTEM system.img --HIDDEN hidden.img
4) Boot the stock Android!
Baseband did not work for me as long as I directly continued without booting Android.
So let Android boot until it says welcome (no need to continue with the initial setup).
5) Install TWRP again
- Boot to bootloader
- sudo heimdall flash --no-reboot --RECOVERY twrp-3.0.2-1-i9305.img
6) Install files in TWRP:
- Boot to TWRP
- Copy files to external SD-Card:
LineageOS from http://buildyourownandroid.selfhost..../daily-builds/
Open Gapps from https://opengapps.org/ (ARM, 7.1, pico)
system(sim_support).zip from https://forum.xda-developers.com/sho...&postcount=800
su (arm) 14.1 from https://download.lineageos.org/extras
- Wipe Data, Cache and Dalvik
- Install all the four files in the order given above
The installation runs fine besides two "E:unknown command [log]" messages.
7) Reboot to system, everything is working fine.
Click to expand...
Click to collapse

Have the phone with the error message encrypted.
Official LineageOS 14.1 Samsung Galaxy S III LTE GT-I9305
last version is running
modem / baseband will display "unknown"
Will continue with the following instructions.
1) Install TWRP:
TWRP 3.2.3-0 fails installing .zips here, 3.0.2-1 is fine.
https://dl.twrp.me/i9305/twrp-3.0.2-1-i9305.img.html
- Boot to bootloader (Power, Volume Down, Home)
As I'm running linux on my PC, I'm using heimdall for flashing:
- sudo heimdall flash --no-reboot --RECOVERY twrp-3.0.2-1-i9305.img
2) For a clean start, wipe everything in TWRP first:
- Boot to TWRP (Power, Volume Up, Home)
- Format data
- Mount everything but EFS and MicroSD, including System, not read-only
- Advanced wipe: Wipe everything but MicroSD card
- Reboot to download
3) Install stock ROM:
I found the current stock ROM here:
https://updato.com/firmware-archive-...r=desc&exact=1
At least for my country (Germany, DBT) the appropriate modem file ...UFOA1 is included!
- Boot to bootloader
- sudo heimdall flash --no-reboot --BOOTLOADER sboot.bin --TZSW tz.img --BOOT boot.img --TOMBSTONES tombstones.img --CACHE cache.img --RADIO modem.bin --RECOVERY recovery.img --SYSTEM system.img --HIDDEN hidden.img
4) Boot the stock Android!
Baseband did not work for me as long as I directly continued without booting Android.
So let Android boot until it says welcome (no need to continue with the initial setup).
5) Install TWRP again
- Boot to bootloader
- sudo heimdall flash --no-reboot --RECOVERY twrp-3.0.2-1-i9305.img
6) Install files in TWRP:
- Boot to TWRP
- Copy files to external SD-Card:
LineageOS from http://buildyourownandroid.selfhost..../daily-builds/
Open Gapps from https://opengapps.org/ (ARM, 7.1, pico)
system(sim_support).zip from https://forum.xda-developers.com/sho...&postcount=800
su (arm) 14.1 from https://download.lineageos.org/extras
- Wipe Data, Cache and Dalvik
- Install all the four files in the order given above
The installation runs fine besides two "E:unknown command [log]" messages.
7) Reboot to system, everything is working fine.
Click to expand...
Click to collapse

uzzoo said:
Have the phone with the error message encrypted.
Official LineageOS 14.1 Samsung Galaxy S III LTE GT-I9305
last version is running
modem / baseband will display "unknown"
Will continue with the following instructions.
Click to expand...
Click to collapse
Why didn't you accept the advice I already provided here? You are using a TWRP version that most likely leads to problems.

I do not have a twrp version on it
There is still an old ClockworkMod Recovery V6.0.4.7
The mobile phone has been running since 2016 with no problems
Had already tried the twrp on it.
Currently under Win10 / Linux

uzzoo said:
I do not have a twrp version on it
There is still an old ClockworkMod Recovery V6.0.4.7
The mobile phone has been running since 2016 with no problems
Had already tried the twrp on it.
Currently under Win10 / Linux
Click to expand...
Click to collapse
I can offer you to send me your phone with DHL or something. Ulm is not that far away from me, around 120 KM. Other possibility if you want to make a trip into the wonderful Allgäu you can come in for a coffee or 2 and we will have a look at your device. Last: I maybe can arrange a date with my sister who is living also in the near of Ulm. Btw I lived in Neu-Ulm for around 20 years . On Sunday the 4th of August I will visit my sister at their home, so that I can put the mobile from her. Or maybe we find a possibility to meet each other at that day and you pass me your device personally. No promise that I can solve the problem, but maybe it is worth a try.

uzzoo said:
I do not have a twrp version on it
There is still an old ClockworkMod Recovery V6.0.4.7
The mobile phone has been running since 2016 with no problems
Had already tried the twrp on it.
Currently under Win10 / Linux
Click to expand...
Click to collapse
Adding to @rodman01 generous offer that is most likely the most proper solution due to the vicinity of Ulm to his home, if you have plans to visit the most westerly part of Germany in the near future, I'd also be personal available to assist.
#######
And if you rather prefer to use the German language, just let me know and I'd place the German translation below the English version. You can also use Google Translate; just place the Englisg translation above your German post. Although German is my mother tongue, just wanted to show you how it looks like.
*****
Translated by Google Translate:
Und wenn Sie lieber die deutsche Sprache verwenden möchten, lassen Sie es mich einfach wissen und ich platziere die deutsche Übersetzung unter der englischen Version. Sie können auch Google Translate verwenden. Platzieren Sie einfach die englische Übersetzung über Ihrem deutschen Beitrag. Obwohl Deutsch meine Muttersprache ist, wollte ich Ihnen nur zeigen, wie es aussieht.
rodman01 said:
I can offer you to send me your phone with DHL or something. Ulm is not that far away from me, around 120 KM. Other possibility if you want to make a trip into the wonderful Allgäu you can come in for a coffee or 2 and we will have a look at your device. Last: I maybe can arrange a date with my sister who is living also in the near of Ulm. Btw I lived in Neu-Ulm for around 20 years . On Sunday the 4th of August I will visit my sister at their home, so that I can put the mobile from her. Or maybe we find a possibility to meet each other at that day and you pass me your device personally. No promise that I can solve the problem, but maybe it is worth a try.
Click to expand...
Click to collapse

[ABANDONED][ROM][ALPHA][13][OFFICIAL][CEPHEUS] EVOLUTION-X Tiramisu 7.0 [08/19/2022]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Evolution X 7.0 for the Xiaomi Mi 9 [Cepheus]
Code:
/*
* Your warranty is void. Or valid, probably?
*
* I am not responsible for bricked devices, dead SD cards, Ebolation X,
* thermonuclear war, or the current economic crisis caused by you following
* these directions. YOU are choosing to make these modificiations, and if
* you point your finger at me for messing up your device, I will LMAO at you.
*/
Living, Breaking, Keep Evolving.
Pixel UI, customization and more, we are Evolution X!
- Team Evolution X -
@joeyhuab
@peaktogoo (Now RealAkito)
Reach us on Twitter! @EvolutionXROM
It's a basic build, the evolver is not there yet
- Everything is still fresh, there might be more issues than expected
- Fingerprint (UDFPS) and screenshots are broken
DO NOT FLASH GAPPS, ALREADY INCLUDED
First Time Install / Clean Flash
0. Unlock your bootloader
1. Download the proper flashable ZIP for your device
2. Download our recovery (the others are not compatible)
3. Reboot fastboot
4. Flash the recovery using the command fastboot flash recovery pathToRecovery.img
5. Reboot recovery
6. Wipe Data/Cache/System
7. Flash the ROM
8. Reboot System and #KeepEvolving
Update / Dirty Flash
Easy way:
1. Open the OTA updater app (Settings->System->System updates)
2.Start downloading the new build
3. Press the install button that appears when the download is complete
4. Let the device rebooting and installing the update
5. It reboots automatically at the end of the installation
Manual way
1. Download the proper flashable ZIP for your device
2. Reboot to Recovery
3. Flash the ROM
4. Wipe cache
5. Reboot System and #KeepEvolving
And what if I want to keep TWRP/Orange fox ?
/!\ We use a modified partitions scheme, so you must use our own recovery, or you'll get an error during the installation process /!\
How to flash a zip file using EvoX recovery ?
1. That's pretty simple. In recovery go to Apply update -> Apply from ADB
2. On your computer, use the command adb sideload pathToZipFile to flash the zip
If the percentage stucks, don't panic, just wait a few minutes until the process finish
3. If a message says "Signature verification failed", It means that you're trying to flash something else than my EvoX builds. Clic "yes" only If you know what you're doing
4. You can wipe cache in Factory reset -> Format cache partition
You want Magisk ? No problem
1. After clean/dirty flashing the rom, Patch boot image from Magisk app (You can find it in the rom zip file)
Uncheck the "Patch vbmeta in boot image" option
2. Copy the patched boot image on your computer
3. Reboot to fastboot
4. On your computer, use the command fastboot flash boot pathToPatchedBootImage
5. Reboot system and #KeepEvolving
Download
Device Support / Official Chat / Donate to me
Android OS version: 13.0.0_r3
Security patch level: August 2022
Build Author: Logan-Developer
Source Code: https://github.com/Evolution-X
Device tree: https://github.com/Evolution-X-Devices/device_xiaomi_cepheus
Kernel Source Code: https://github.com/Evolution-X-Devices/kernel_xiaomi_cepheus
Based On https://github.com/Niviann/kernel_xiaomi_cepheus
ROM Developer: joeyhuab

Changelog for latest build (08/19/2022)
Hello everyone
Today I'm releasing the first build of EvoX 7.0, based on Android 13.
Please note that it's an alpha. Many features are missing, and it may be a little bit buggy.
Do not dirty flash from an earlier Android version. The best is to clean flash.
Please do a clean flash and use default kernel (Soviet) before reporting any issue.
=========================================
Device changes:
- Minimal changes for being able to boot Android 13
- Switch to file based encryption
- Switch to f2fs for cache partition
- Switch completely to f2fs for userdata partition
- Switch to erofs for system partitions
=========================================
Rom changes:
- Initial Android 13 build
Download
EvoX recovery
Post Soviet kernel

Wow...that are really cool news! Thank you so much!

good news, thanks a lot for the build. I try it immediately

where wipe button is?

pipes80 said:
where wipe button is?
Click to expand...
Click to collapse
It's in factory reset menu

is backup restore recommended?

error in /sideload/package.zip

tried with twrp recovery too but take same error

pipes80 said:
error in /sideload/package.zip
Click to expand...
Click to collapse
You use this recovery, right ? https://github.com/Evolution-X-Devi...lpha/evox_recovery_cepheus_retrofit_alpha.img
during the sideload you should get a message telling you that verification failed. Simply press yes, and it should be fine
With twrp that's normal to get this error, it's not compatible

This is what I get with the recommened recovery:
"adb: failed to read command: No error"
and nothing else happens

LoganDeveloper said:
Usi questo recupero, giusto? https://github.com/Evolution-X-Devi...lpha/evox_recovery_cepheus_retrofit_alpha.img
durante il sideload dovresti ricevere un messaggio che ti informa che la verifica non è riuscita. Premi semplicemente sì e dovrebbe andare bene
Con twrp è normale ottenere questo errore, non è compatibile
Click to expand...
Click to collapse
yes, i have use all two to try but give same error

gmarondel said:
This is what I get with the recommened recovery:
"adb: failed to read command: No error"
and nothing else happens
Click to expand...
Click to collapse
What do you use for adb ? Maybe your version is just too old
Maybe It's also your problem @pipes80

LoganDeveloper said:
What do you use for adb ? Maybe your version is just too old
Maybe It's also your problem @pipes80
Click to expand...
Click to collapse
i have download all in this page, reinstalled recovery from fastboot and evolution from recovery with adb tools downloaded today from official website

gmarondel said:
This is what I get with the recommened recovery:
"adb: failed to read command: No error"
and nothing else happens
Click to expand...
Click to collapse
Using the adb version contained in this zip should fix your issue: https://dl.google.com/android/repository/platform-tools-latest-windows.zip

pipes80 said:
i have download all in this page, reinstalled recovery from fastboot and evolution from recovery with adb tools downloaded today from official website
Click to expand...
Click to collapse
this ? https://dl.google.com/android/repository/platform-tools-latest-windows.zip

LoganDeveloper said:
this ? https://dl.google.com/android/repository/platform-tools-latest-windows.zip
Click to expand...
Click to collapse
yes

Good new, nice work

LoganDeveloper said:
Using the adb version contained in this zip should fix your issue: https://dl.google.com/android/repository/platform-tools-latest-windows.zip
Click to expand...
Click to collapse
No that did not made the trick! Same error and no effort.

Great news to have a rom with android 13 that early, keep up the good job, I'll give it a try.
Thank you!