Hello Together,,finally this day is coming...!!!
This kernel is based on ARA1 Source and many feature in this kernel i taken from Galaxy S7 Superkernel Source build by @Tkkg1994 at this LINK, Many Thanks to him for allowing me use his source
if u want to take my work or need something please ask me first,otherwise u are not allowed to take it,thank you
IF YOU FOLLOW MY STEPS BELOW, YOU WILL LOSE YOUR WARRANTY,I'M NOT RESPONSIBLE FOR ANY DAMAGED DEVICE AFTER FLASING ANY FILE FROM THIS THREAD!!
Features of this Kernel:
- Build with latest GNU GCC 6.4.1 optimized for cortex a53
- Build with BRD4 kernel source!
- Performance and Batterylife improved
- Choose between different CPU governors: performance, powersave, userspace, ondemand, interactiv (default), conservative, zzmoove, barry_allen, nightmare, darkness, pegasusq, yankactive intelliactive, ondemandplus, intellimm, bioshock, lionheart, smartmax, smartass2, smartmax_eps, alucard, blu_active, cafactive, electrodemand, ondemand_x, hyper and intellidemand
- Built with latest ramdisk sources from samsung (BRD4)
- Frandom Support
- Gzip compressed ramdisk (supersu, magisk etc will work fine)
- I/O schedulers: CFQ (Default), ROW, No-op, Deadline, BFQ, FIOPS, SIO, VR, ZEN, FIFO, maple and SIOplus
- UKSM (Ultra Kernel Samepage Merging)
- Zram can be set in synapse
- Gentle fair sleeper switch enabled
- StateNotifier included
- HTC's async added
- LED Control
- Charging control
- Full CPU/GPU control in synapse
- Many controllable wakelocks
- Underclock: big core to 312Mhz, little core to 338Mhz
- Overlock: depens on your ASV(grade c can be set to 2700 grade a phone max to 2800)
- GPU OC to 806 Mhz
- Init.d Support
- Wlan Wakelock decreased
- TCP (Network) control: Bic (default), Reno, cubic, Westwood, Highspeed, Hybla, HTCP, Vegas, Veno, Scalable, LP, Yeah and Illinois
- Selinux is set to permissive
- Zen-Tune implemented
- All bad samsung drivers disabled (like tima or rkp)
- Force encryption disabled
- Knox faked to 0x0
- Boeffla wakelock control
- many more,im not remember anymore
Bugs/Problem:
-u can tell me
This Kernel already tested more than 1 week and and only tested in n935f also didnt give any error, but if u find a bug u can tell me with log.thanks
How to Install:
1. Install TWRP in your phone,check this LINK for more information
2. Follow the instructions on the page above, until you get a working recovery
3. Take all backup from your phone in TWRP, U can restore it if something goes wrong,
3. Download the Kernel from below and copy it to your Phone
4. Reboot to your recovery by pressing volume up, home button and power button at the same time.
5. Install zip/select the kernel
6. Flash supersu or magisk and all things that u have modify before in your kernel,otherwise u will stuck in twrp.
7. Wipe cache and dalvik cache (recommand)
8. Reboot
Credits/Thanks:
- @Tkkg1994
- Samsung for sources
- the great linus for his amazing kernel source
- @arter97
- @jesec (for the great fingerprint fix!!)
- @dorimanx
- @AndreiLux
- @halaskz
- @neobuddy83
- @UpInTheAir for his great Synapse implementation
- @djb77 for the toolchain
- @DarkLord1731
- @zrock
- also all dev that i have taken the commit..
- please tell me if i missing one.. thank you
Support:
You like My Work ??u can hit thanks button,..thank you..
XDAevDB Information
KimcilKernel, Kernel for the Samsung Galaxy Note Fe, SM-N935F
Contributors:
@jaran kepang
Source Code:
V1.0 source code
V2.0 source code
Version Information
Status: -
Current Stable Version: V2.0
Stable Release Date: -
Linux Kernel Version: 3.18.112
Created: 2018-04-25
Last Updated: 2018-06-23
DOWNLOAD
KimcilKernel-v1.0
KimcilKernel-v2.0
CHANGELOG
v1.0
- initial release
v2.0
- only build for oreo
- update linux kernel to 3.18.112
- same feature as nougat kernel
- remove synapse
- remove thunderplug hotplug driver
- ONLY FOR N935F.. KOREAN VERSION IS UNDER BUILD
- many more cant remember all
Thanks @djb77 for helping me build oreo kernel.
Q and A
Q : What kernel manager should i use ?
A : This kernel already support synapse but u can use mtweak by @morogoku in s7 thread or use kernel auditor find in playstore
Q : -
A : -
Reserved
Fantastic Work! First Kernel for the N935F!
Cheers and Keep up the good work.
Downloading now...!
JazonX said:
Fantastic Work! First Kernel for the N935F!
Cheers and Keep up the good work.
Downloading now...!
Click to expand...
Click to collapse
thank you bro..im waiting for feedback..???
thanks bro.. i can flash without format.. because i have already root and flash some other mode
n935k can install?
mr.mgmg said:
thanks bro.. i can flash without format.. because i have already root and flash some other mode
Click to expand...
Click to collapse
if u ask..then u only need to wipe dalvik cache..
Xepher97 said:
n935k can install?
Click to expand...
Click to collapse
i dont know..this is only tested on n935f..but if u want..u can try and give log if any error..
jaran kepang said:
if u ask..then u only need to wipe dalvik cache..
i dont know..this is only tested on n935f..but if u want..u can try and give log if any error..
Click to expand...
Click to collapse
the quick charge not work after flash the kernel
u can give me the stock kernel, because im not take backup by recovery
mr.mgmg said:
the quick charge not work after flash the kernel
u can give me the stock kernel, because im not take backup by recovery
Click to expand...
Click to collapse
what phone model do u have ??
fast charging is working fine..can u send me the screenshot.
jaran kepang said:
what phone model do u have ??
fast charging is working fine..can u send me the screenshot.
Click to expand...
Click to collapse
the model n935f
yeh im flash the kernel on this rom
https://forum.xda-developers.com/note-fe/development/superfe-note-fe-n935s-l-k-t3651877
mr.mgmg said:
the model n935f
yeh im flash the kernel on this rom
https://forum.xda-developers.com/note-fe/development/superfe-note-fe-n935s-l-k-t3651877
Click to expand...
Click to collapse
working fine on my phone..are u wiping dalvik cache after install ??
what kernel manager are u use ??try looking in battery tab in kernel manager and give me screenshot.thanks
Woah great work bro!! Kernel with fully compatible with synapse
But wait wait wait.. 'kimcil' kernel???? What!?? Wkwkwk
Ha_Dua_O said:
Woah great work bro!! Kernel with fully compatible with synapse
But wait wait wait.. 'kimcil' kernel???? What!?? Wkwkwk
Click to expand...
Click to collapse
yes of course..u can find gpu thermal control only in synapse
...whats wrong with kimcil ???
lollllllllll...
mr.mgmg said:
the model n935f
yeh im flash the kernel on this rom
https://forum.xda-developers.com/note-fe/development/superfe-note-fe-n935s-l-k-t3651877
Click to expand...
Click to collapse
waitt...
u mean u didnt flash kimcil kernel right ??
u flash kernel from that link ?
SM-N935K Android 8.0 Flash Kernel Fails
Xepher97 said:
SM-N935K Android 8.0 Flash Kernel Fails
Click to expand...
Click to collapse
this is only for n935f bro..not yet supported for korean version.also still in nougat 7.0..im waiting for firmware of f version then i will be update to support 8.0
Can you add DeX support for kernel? I don't know if DeX needs any kernel code or installing apk works. This is more like a question than request.
Awesome work! Im new to this. Installed it last night. I love the disabled encryption i can now view my saved wifi passwords ( works well with androdumpper). Rooting has now meaning hehe. Question.. is there an advantage in undervolting cpu/gpu in android ? Any tips in tweaking ? Thanks a lot @jaran kepang
InfinateXtremer said:
Can you add DeX support for kernel? I don't know if DeX needs any kernel code or installing apk works. This is more like a question than request.
Click to expand...
Click to collapse
i guess it need some patch for support dex..
i cant try because i dont have dex..thats make me aware to find out the problem..:fingers-crossed::fingers-crossed:
donart81 said:
Awesome work! Im new to this. Installed it last night. I love the disabled encryption i can now view my saved wifi passwords ( works well with androdumpper). Rooting has now meaning hehe. Question.. is there an advantage in undervolting cpu/gpu in android ? Any tips in tweaking ? Thanks a lot @jaran kepang
Click to expand...
Click to collapse
u can find about kernel tweaks in superkernel s7e thread..link in first post..for me i undervolt -37mv for all cpu and gpu..but if u getting any error after uv like random reboot or freezing..try revert back the tweak..
Related
Hellow!
This kernel works only on stock and some custom KItKat 4.4.2 TouchWiz ROMs for Samsung Galaxy S4 mini I9190/I9195/I9192 variants!
Features:
Based on last official kernel source for GT-I9195 (used SilviuMik's branch)
Synced with E370KKTU2BOD2 kernel source (KK 4.4.4 kernel for SHV-E370K variant of Galaxy S4 Mini LTE (announced only for Korea))
CPU Overclock (OC): up to 2052MHz
CPU Underclock (UC) down to 81MHz
GPU Overclock up to 627MHz
CPU Voltage Control (VC)
Hotplug thread infrastructure
Faux123's Intelliplug
MyFluxi MSM-hotplug new
Alucard-hotplug new
Lazy-hotplug new
Gamma control
Faux123's GPL Sound Control 2.1
Sweep2Sleep
Fast charge
Upgraded taus88 to taus113 algorithm for entropy generator
Added and realy used frandom (fast random number generator)
Krait optimized strcmp and memcmp
Motorola MSM memcopy enhancements (memutils) to improve of the memory subsystem performance
CPU-boost new
Quickwakeup new
KSM (Kernel SamePage Merging)
Timer slack controller
Speedup late resume patch for faster wakeup of the device
F2FS support
NTFS support with full read/write access
init.d support
Updated exFAT module to v1.2.12
LZ4 compressor for zSwap new
TCP-cong: westwood, vegas, reno and etc.new
Set SELinux always into "Permissive mode"
Pre-installed bosybox (placed in /sbin folder)
Compiled with Linaro GCC 4.9.4-2015.06 Toolchain
Additional Governors:
Impulse
[*]Intelliminmax
[*]Intelliactive
[*]Lionheart
[*]Ondemandplus
[*]Smartmax
[*]Preservative
[*]Wheatly
[*]Intellidemand new
[*]Alugard new
[*]Slim new
Additional I/O Schedulers:
FIOPS (Fair Input/Output Per Second)
[*]SIO (Simple I/O)
Credits:
@arco68
@Christopher83
@F4k
@junkyde
@SilviuMik
@GrarakInstallation instructions:
for ODIN:
1. Extract XXXX-ALX-x.x.x.md5 from XXXX-ALX-x.x.x.tar.zip
2. Flash with ODIN XXXX-ALX-x.x.x.md5 file
for CWM:
1. Copy XXXX-ALX-x.x.x.zip (without tar) to your sdcard
2. Reboot into CWM recovery
3. Choose "Install zip from sdcard"
4. Select XXXX-ALX-x.x.x.zip kernel and confirm installation.
Download:
Link1
Link2
XDA:DevDB Information
Custom TouchWiz KK4.4.2 Kernel for I9190/I9195/I9192, Kernel for the Samsung Galaxy S 4 Mini
Contributors
alexax66
Source Code: https://github.com/alexax66/KitKat_kernel_samsung_msm8930-common
Kernel Special Features: CPU and GPU Overclocking, CPU Underclocking, CPU Voltage Control, Advanced CPU hotplugs, Gamma control, Faux123's Sound Control, Sweep2Sleep, Additional Governors and I/O Schedulers, KSM, F2FS, NTFS, Timer Slack Controller, Fast charge
Version Information
Status: Stable
Current Stable Version: ALX-0.1.2
Stable Release Date: 2015-11-15
Current Beta Version: ALX-0.1.3
Beta Release Date: 2015-12-30
Created 2015-08-15
Last Updated 2015-11-18
How to use kernel features
- for CPU, GPU, Hotplug and Gamma Control tunings use Kernel Auditor by Grarak
- for Faux123's Sound Control tuning use FauxSound Audio/Sound Control
- set of some features for switching through a parameters of the build.prop:
For all kernel version:
- to enable Sweep2Sleep:
Code:
ro.config.sweep2sleep=true
- to enable init.d support add in build.prop:
Code:
ro.config.sysinit=true
Only for ALX-0.1.0 and later:
- to enable KSM:
Code:
ro.config.ksm=true
Only for ALX-0.1.1 and later:
-to enable Adaptive LMK:
Code:
ro.config.adaptive_lmk=true
Read about how adjust LowMemoryKiller with management of not killable processesin
Only for ALX-0.1.2 and later:
Use only one of this hotplugs!
-to set Alugard-hotplug as default:
Code:
ro.config.alucardplug=true
-to set MyFluxi MSM-hotplug as default:
Code:
ro.config.msm-hotplug=true
-to set Intelli-hotplug as default:
Code:
ro.config.intelliplug=true
-to set Lazy-hotplug as default:
Code:
ro.config.lazyplug=true
Chaneglog:
ALX-0.1.0
ALX-0.1.1
ALX-0.1.2-Release
ALX-0.1.3
Full Changelog
Kernel tested by me over month, all :good:
---------- Post added at 09:23 AM ---------- Previous post was at 09:10 AM ----------
One thing, gamma control work only in device control app, and after reboot is set by default, maybe in future is will be fixed
can i use with ploiki's rom?
00ehsan00 said:
can i use with ploiki's rom?
Click to expand...
Click to collapse
I not test this kernel in ploiki's rom, but i think that it work without any problems.
OOMMGG!!! Finallyyyyyy!!! I can't believe it!!!
THANK YOUUUU! :victory: :good:
o0chtm0o said:
OOMMGG!!! Finallyyyyyy!!! I can't believe it!!!
THANK YOUUUU! :victory: :good:
Click to expand...
Click to collapse
Yep)))
Some summer day i tired waiting kernel from f4k and ask my friend alexax66, he say ok no problem, next day i tested first version
P.S.
By the way, he not use stock, he use CM, and he did it for us just because he good man :good:
denon480 said:
Yep)))
Some summer day i tired waiting kernel from f4k and ask my friend alexax66, he say ok no problem, next day i tested first version
Click to expand...
Click to collapse
Wow! It's INCREDIBLE!! I have no words. I hope it's not the first and last work, I hope OP can continue with this project. It's amazing! I was waiting for this since loooooong time ago, losing any hopes
o0chtm0o said:
Wow! It's INCREDIBLE!! I hace no words. I hope it's not the first and last work, I tope OP can continúe with this project. It's amazing! I was waiting forma this since loooooong time loosing any hopes
Click to expand...
Click to collapse
not first and not last)))
Soon, OTG and maybe ext4 support
it's stable and there is no battery drain with overclock and underclock.
it's fully work with ploiki's rom too.
do u have plane to add otg and bln support?
and another question is that how can i use sweep2sleep?
thanks again for kernel.:good:
00ehsan00 said:
it's stable and there is no battery drain with overclock and underclock.
it's fully work with ploiki's rom too.
do u have plane to add otg and bln support?
and another question is that how can i use sweep2sleep?
thanks again for kernel.:good:
Click to expand...
Click to collapse
We test some new patches bln, dosent work
add in build.prop
ro.config.sweep2sleep=true
reboot
swipe on the bottom screen from left to right, is lock the phone
Tested new kernel with memory patches.
Just for info, work on kernel dont stop
Very very good job... I appreciate your work with this kernel ... I have only one question if is possible, what are the best governor and scheduler to use for a balance between performance and battery?
Sent from my GT-I9195 using xda premium
petrevirgil said:
Very very good job... I appreciate your work with this kernel ... I have only one question if is possible, what are the best governor and scheduler to use for a balance between performance and battery?
Sent from my GT-I9195 using xda premium
Click to expand...
Click to collapse
I personally like ondemand/cfq I find it makes things that tiny bit more responsive like 1080p video recording and scrolling thru my Google Keep widget. Ondemand for me gives some of the best battery.
who have tested this kernel with the rom "N5 four mini" ?????
better than silviu for battery ???
Will this work on I9192?
Loulou-13 said:
who have tested this kernel with the rom "N5 four mini" ?????
better than silviu for battery ???
Click to expand...
Click to collapse
I'm currently using this with N5 four mini rom, works so awesome, incredible battery life, there is just one problem though, private mode does not work with this kernel, but they said its because of the rom not fully compatible with the kernel., i don't know if this works fine with s6 port 5.1, havent tried yet.
Can I use with S6 Mini Port Rom
alexax66
sajid0786 said:
Can I use with S6 Mini Port Rom
alexax66
Click to expand...
Click to collapse
Yes, you can use this variant
KaminariKernel
Code:
#include "std_disclaimer.h"
/*
* Your already voided warranty is now void again.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh my *** off at you.
* Really hard.
*/
Hiya fellas.
This is my modded kernel for our loved Moto G 1st gen (LTE version). I decided to resume developing it since I realized I was wrong (I thought no one was interested in it). So here we are again.
Features:
Sources & Optimizations
- Based on Motorola's shared falcon/peregrine source
- Compiled with generic Linaro 5.3 toolchain
- Compiled with -O3 optimization & some more flags (e.g. Pipe flag)
- Optimized ARM RWSEM & Square Root algorithms
- Kernel-side NEON mode
- Some miscellaneous armv7 tweaks
Click to expand...
Click to collapse
Hotplugging Drivers
- Ye Olde MPDecision
- AutoSMP
Click to expand...
Click to collapse
Extra CPU Governors
- Bioshock
- Dancedance
- Impulse
- Lionheart
- Smartmax
- Yankactive
- Yankdemand
- Zzmoove
Click to expand...
Click to collapse
Extra I/O Schedulers
- Bfq
- Fiops
- Sio
- Vr
- Zen (Default)
Click to expand...
Click to collapse
Sound
- Faux's Sound Control
- Headset High Performance Mode
Click to expand...
Click to collapse
Screen/GPU
- Kcal Screen Control
- Dt2w/s2w
- State Notifier driver
- Adreno Idler
- GPU overclock & underclock (533MHz/100MHz)
Click to expand...
Click to collapse
Extra Sh*t
- USB Fast Charge
- Disabled gentle fair sleepers
- Extra TCP Congestion Controllers
- HID Driver (Use your phone as a USB keyboard/mouse)
- Compass & Accelerometer drivers now use State Notifier
- Fsync enabled by default
- Kexec-hardboot patch (for multirom compatibility)
- Power-efficient workqueues
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Downloads:
Regular Version
Overclock-Ready Version Soon™
Click to expand...
Click to collapse
Looking for previous releases?
- All releases until 1.2.x: Go here
- All releases from 1.3 onwards: Go here
- KaminariLite (discontinued): Go here
- KaminariSL (previously Optimized Stock): Go here
Click to expand...
Click to collapse
Got into trouble and need to go back to the stock kernel?
Then you should click this link here, bud!
Click to expand...
Click to collapse
Flashing & Tweaking Instructions (Follow this very carefully!!!):
- Place the zip at the root of your phone's internal storage (This is very important! If you flash the zip from a subfolder, you'll be left without wi-fi!!!)
- Reboot into recovery
- Flash the zip
(Another way: Reboot into recovery without copying the zip, and flash it via adb sideload)
- (Optional) Wipe cache and/or ART cache
- Reboot and have fun!
Coming from another kernel? Then I suggest you to (at least!!!) dirty flash your stock rom and kernel in order to avoid any issues!
Wanna tweak it? Use Kernel Adiutor! (I do NOT support Synapse!!!)
Click to expand...
Click to collapse
Want some info on what this kernel offers you?
Then go here! (Credits to @AssToast for suggesting and to @gsstudios for creating the site!)
Click to expand...
Click to collapse
"Thank You" Section
- Motorola/Lenovo, for putting up them sources
- The CyanogenMod team
- @Flashhhh, his work kinda inspired me to do this
- @Aayushya, he provided the initial cherry-picks
- @faux123, for Sound Control & Intellithermal
- @savoca, for Kcal Screen Control
- @hurtsky, a huge load of cherry-picks came from his sources
- @Alberto97, for the Linux version bumps (.43 up to .109)
- @YoshiShaPow, for some more stuff
- Some more fellas whose names I can't remember
Click to expand...
Click to collapse
XDA:DevDB Information
KaminariKernel (Lollipop-Peregrine), Kernel for the Moto G
Contributors
kingkaminari
Source Code: https://github.com/Kamin4ri/KaminariKernel/tree/L
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R3
Stable Release Date: 2016-07-07
Created 2015-10-15
Last Updated 2016-07-09
Hey!!! Are you looking for the changelogs?
I'm moving them to this page here! So please wait!
F.A.Q. Read this before moaning!!!!!!
Q: ERMAHGERD DIS KERNEL SUCKZ, MAH BATTERY IS DEAD IN 30 MINS, PLZ HALP!
A: When I created this kernel, I never had the intention to have it decrease battery life. So before / instead of complaining, go check your f***ing wakelocks and fix them! The kernel isn't responsible for this, your apps and/or services are.
Q: Will this kernel work on AOSP / CM12.1 ROMs?
A: No.
Q: Will this kernel work on xyz rom?
A: No. Non. Nein. Title clearly says: STOCK.
Q: How do I report bugs?
A: If you wanna report a bug, then grab your kernel log - either by pulling /proc/last_kmsg (in case of a random reboot / kernel panic or oops) or copying the output of "dmesg" via shell - and paste it at pastie.org and link it in your post (or save it to a text file and attach it to your post). Don't bother getting logcats, they don't apply for kernel debugging purposes.
Q: How do I flash this?
A: I suggest you scroll up and read the OP. The instructions are there.
Q: How do I tweak this kernel?
A: Download Kernel Adiutor from the Play Store and have fun. For Synapse, scroll up and read the OP first.
Q: This kid is such a n00b!
A: Oh well then, why don't you go work on a kernel yourself, instead of criticizing my work and, by doing so, wasting your time?
Optimized Stock Kernel (aka "Kaminari SuperLite")
Since KaminariLite has been discontinued, and Kaminari has become cleaner regarding features, I've been working on a version closer to the stock kernel, only more optimized.
So here is my Optimized Stock kernel.
Differences in relation to the stock kernel:
- Compiled using my custom Linaro 5.2 toolchain
- Bumped to Linux version 3.4.110
- Compiled with -O3 and Graphite flags (Same as Kaminari)
- Most if not all of Kaminari's optimizations have been applied
- All governors except Interactive removed
- Default I/O scheduler changed to cfq
- Default TCP congestion algorithm changed to Westwood
- Supports both stock and GPE roms, regardless of filesystem (f2fs or ext4) used on /data
- Adds init.d support
- Default ZRAM size changed to 400MB
Differences in relation to Kaminari:
- All governors except Interactive removed
- All TCP congestion algorithms except Westwood and Reno removed
- Additional I/O schedulers (zen, vr, sio, fiops, bfq) removed
- Bricked Hotplug has been replaced by MPDecision
- All non-essential features (FauxSound, Kcal, Dt2w...) have been removed
- Stock PowerHAL has been re-enabled
- Version bump to 3.4.110 (Kaminari has been kept at 3.4.42)
- Compressed using LZO (Kaminari uses XZ)
Download it from here.
This one is mostly flash-and-forget. No need to tweak anything.
If you're coming from Kaminari, and you're using Kernel Adiutor, you MUST clear the app's data before flashing this build. If you can flash the stock kernel before flashing this, it's even better.
One more reserved...
Okay. Last reserved.
Oh guys... Can someone provide me their init.rc? So I can add proper init.d support
kingkaminari said:
Oh guys... Can someone provide me their init.rc? So I can add proper init.d support
Click to expand...
Click to collapse
Here the mine, :good:
Second test build is up! https://www.androidfilehost.com/?fid=24052804347838189
Changelog is in the second post.
pretty stable kernel as far as i can tell. There is just one thing.. how do i get the over clock to stick? no matter if i have intelliplug on or off it always changes back to default frequencies after a while
EpiccSkillZz said:
pretty stable kernel as far as i can tell. There is just one thing.. how do i get the over clock to stick? no matter if i have intelliplug on or off it always changes back to default frequencies after a while
Click to expand...
Click to collapse
Try a different governor. Interactive likes to reset the frequencies to their default values. Or the chipset may be incompatible (despite it still being - technically - only an msm8226 with lte support).
kingkaminari said:
Try a different governor. Interactive likes to reset the frequencies to their default values. Or the chipset may be incompatible (despite it still being - technically - only an msm8226 with lte support).
Click to expand...
Click to collapse
Could you please recommend me a governor?
EpiccSkillZz said:
Could you please recommend me a governor?
Click to expand...
Click to collapse
Either intelliactive or yankactive
Sent from my XT1033 using Tapatalk
Woww! Finally CPU overclock! It works very good! Thankyou man
I had read that overclock was virtually impossible because our phone was locked to a maximum CPU freq, it wasn't true? It's nice to have other options, thank you for the development.
rodsayd said:
I had read that overclock was virtually impossible because our phone was locked to a maximum CPU freq, it wasn't true? It's nice to have other options, thank you for the development.
Click to expand...
Click to collapse
I also believed that. But I once ran two Antutu benchmark tests, one with the default freq (1.2GHz) and the other with an increased freq (1.6GHz), and in the second test, I got a slightly higher score (which leads me to assume that the overclock actually works). Plus, my overclock implementation is different from the previous ones.
kingkaminari said:
I also believed that. But I once ran two Antutu benchmark tests, one with the default freq (1.2GHz) and the other with an increased freq (1.6GHz), and in the second test, I got a slightly higher score (which leads me to assume that the overclock actually works). Plus, my overclock implementation is different from the previous ones.
Click to expand...
Click to collapse
The phone has a locked multiplier, but it still have FSB overclock (like the old AMD athlom XP Days)
Dirty flashed on xt1039, it works. It's now time for tuning.
Thanks a lot! I was waiting for a kernel like this.
Is there the possibility to add the undervolting feature?
sclcn12 said:
Dirty flashed on xt1039, it works. It's now time for tuning.
Thanks a lot! I was waiting for a kernel like this.
Is there the possibility to add the undervolting feature?
Click to expand...
Click to collapse
I've tried to do that with falcon. I had to solve the merge conflicts manually, but in the end the phone wouldnt boot - it went into a red screen saying "watchdog reset detected" right after the motorola logo. So, with that being said, we wont have undervolting for now, at least till i manage to solve that conflict
Third test build up!
Download
Changelog is in the second post.
Thanks for the work, it's a great kernel. Working really great
Enviado desde mi XT1040 mediante Tapatalk
Features
Based on official CM-13.0 & CM-14.x kernel source
CPU Overclock (OC) upto to 2GHZ
CPU Underclock (UC) down to 162MHz
GPU Overclock up to 627MHz
CPU Voltage Control (VC)
Faux123's GPL Sound Control 3.5
Faux123's Simple GPU governor
Fast charge
F2FS
Gamma Control
TCP-cong: westwood, vegas, reno and etc.new
zRAM
LZ4 compressor/decomressor for zRAM
init.d support
MSM Limiter
-O3 Optimizations, and Neon Optimizations
Dynamic management of dirty page writebacks
Dynamic FSync
Dynamic LowMemoryKiller
Enable/Disable CRC
Enable/Disable Gentle Fair Sleepers
Additional CPU hotplugs:
MyFluxi MSM-hotplug
Alucard-hotplug
Intelli-Hotplug
Additional Governors:
Yankactive
Intelliminmax
Smartmax EPS
impulse
Alucard
Darkness
Nigtmare
Ondemandplus
Intelliactive
Lionheart
zzmoove
Additional I/O Schedulers:
SIO (Simple I/O)
SIO Plus (Simple I/O Plus)
V(R)
ZEN
DOWNLOAD:
Remix-2 for CM-13
AFH Kernel Folder
For CM-14
https://www.androidfilehost.com/?w=files&flid=125544
Available versions up to and including 2.14
- Unlimited = overclocked to 2052 MHz - If you get a boot loop after flashing this version, it means your hardware can not handle this frequency. Use the limited version
- Limited = max CPU freq. is the stock 1728 MHz. Use the Performance Control app if you want to overclock
As of Remix 2.15 there is only one version for 3G & DS and one for LTE
- The initial CPU frequency is set to stock, then can easily be overclocked with any kernel tweaking app
New version numbers
- After 2.18 the next new version is 2.7.13 as a result of a change in our version numbering system.
- New format: 2.A.B, where A will increase with every change to our custom features, B will increase when syncing with CM sources
Installation instructions
- FLASH USING TWRP 3.0 RECOVERY
- Copy xx.zip to your SDCARD
- Reboot into recovery
- Choose "Install zip from sdcard"
Guide on kernel configuration:
Most up to date guide on CPU governors, I/O schedulers and more!
Source: Github
credits:
@csendre
@osm0sis
@alexax66
@arco68
@F4k
@Grarak
@BlackAfghan
@kotzir
XDA:DevDB Information
CUSTOM KERNEL FOR CM13 & CM14 BASED ROMS, Kernel for the Samsung Galaxy S4 Mini
Contributors
DarkFrenzy, csendre
Kernel Special Features: CPU Overclock (OC) upto to 2GHZ CPU Underclock (UC) down to 162MHz GPU Overclock up to 627MHz CPU Voltage Control (VC) Faux123's GPL Sound Control 3.5 Faux123's Simple GPU governor Fast charge F2FS CPU governors
Version Information
Status: Stable
Created 2016-07-29
Last Updated 2017-05-21
Kernels for testing
attached below
Thanks bro!!!!
Tks for your work. What abt stock cm13 kernel for i9192 just like i9195? I see only bliss kernel for i9192...let me know what you need to include that?
arsm74 said:
Tks for your work. What abt stock cm13 kernel for i9192 just like i9195? I see only bliss kernel for i9192...let me know what you need to include that?
Click to expand...
Click to collapse
Give him boot.img from ur ROM zip,,he'll make one.
He is so kindful person.
And humble request from ME to All HIT THANKS BUTTON ON OP TO ENCOURAGE HIM.
And BTW bliss version for duos working like a charm on latest blissM build, thanks.
DarkFrenzy said:
Hi!
Welcome to unofficial version of f4ktion kernel, this is a kernel based on the arco68's/cm13.
Additional Governors:
SmartASSH3 -------> NOT WORKING PROPERLY. STUCKS ON MAX FREQ ALL THE TIME.
DOWNLOADS:
GT-I9192
BLISSPOP6.1 KERNEL --------> It's not BlissPop my friend, it's just Bliss. BlissPop was lollipop 5.1.1
Click to expand...
Click to collapse
Here I send you again the boot.img from my i9195 Bliss 6.1 (MM 6.0.1) Link
Please, correct the colored text :good:
o0chtm0o said:
Here I send you again the boot.img from my i9195 Bliss 6.1 (MM 6.0.1) Link
Please, correct the colored text :good:
Click to expand...
Click to collapse
hehe silly mistakes! thanks for that. your bliss is ready
http://forum.xda-developers.com/showpost.php?p=65273428&postcount=2323
It is for RR 5.6.3 from Blackjubel.
arsm74 said:
Tks for your work. What abt stock cm13 kernel for i9192 just like i9195? I see only bliss kernel for i9192...let me know what you need to include that?
Click to expand...
Click to collapse
give me the boot.img
flipeicl said:
http://forum.xda-developers.com/showpost.php?p=65273428&postcount=2323
It is for RR 5.6.3 from Blackjubel.
Click to expand...
Click to collapse
for GT-I9190 ???
DarkFrenzy said:
hehe silly mistakes! thanks for that. your bliss is ready
Click to expand...
Click to collapse
Thank you very much. I apreciate your help, support, patience and dedication :good: :good: :good:
DarkFrenzy said:
for GT-I9190 ???
Click to expand...
Click to collapse
Sorry, it's for i9192.
flipeicl said:
Sorry, it's for i9192.
Click to expand...
Click to collapse
too late i uploaded it with GT-I9190 kernel. now removing.
cm13 stock (k2wl) boot image for i9192
rayzen6 said:
Give him boot.img from ur ROM zip,,he'll make one.
He is so kindful person.
And humble request from ME to All HIT THANKS BUTTON ON OP TO ENCOURAGE HIM.
And BTW bliss version for duos working like a charm on latest blissM build, thanks.
Click to expand...
Click to collapse
here is the boot.img as requested for cm13 stock build for i9192
arsm74 said:
here is the boot.img as requested for cm13 stock build for i9192
Click to expand...
Click to collapse
updated. check OP
(now going to sleep )
DarkFrenzy said:
updated. check OP
(now going to sleep )
Click to expand...
Click to collapse
Tks @DarkFrenzy...appreciate it
Here I leave you the boot.img files from Bliss 6.1 latest release (20160217)
Those that you've uploaded are from 20160208 (at least the ones I sent you).
Thanks for your help and support!
o0chtm0o said:
Here I leave you the boot.img files from Bliss 6.1 latest release (20160217)
Thanks for your help and support!
EDIT:
3g is taking a lot for downloading, I'll put it here as soon as it finish
Click to expand...
Click to collapse
i have already uploaded the bliss6.1 is that not latest ?
FM radio not working
DarkFrenzy said:
...
GT-I9192
....
CM13 KERNEL
....
Click to expand...
Click to collapse
A small but important bug report: When using your kernel (for CM13) FM radio doesn't start!
I'm using the latest version of CM13 (2016-02-15) plus Xposed and SuperSU-2.54-BETA.
After reflashing the CM13 package and the additions FM radio is ok again.
Keep up the excellent works! Can I help debugging somehow? Big thanks!
@DarkFrenzy Fast Charge works for me using Performance Control App. GTI-9195
Thanks again for your contribution
FOR DEVS AND USERS BEFORE FIGHT ME CLICK HERE!: https://forum.xda-developers.com/showpost.php?p=70362424&postcount=3
Code:
DISCLAIMER!!
I am not responsible in any way for anything that can be happen to your device when you flashing my kernels.You do so at your own risk!
Features
Anykernel:
- Anykernel2 zip for maximum compatibility with all ROMs, CrazyAquaKernel uses your existing ramdisk (Do NOT flash this over other custom kernels!You should only flash CrazyAquaKernel over the kernel that came with your ROM!!)
Toolchain:
UBERTC 4.9 Toolchain
CPU:
- governors:
elementalx
interactive
ondemand
zzmoove
ondemandplus
conservative
powersave
userspace
- input boost
IO schedulers:
bfq
tripndroid
cfq
noop
deadline
fiops
row
sio
siopilus
zen
vr
fifo
Thermal:
- msm thermal
GPU:
- Adrenoboost
More:
- init.d support
- insecure kernel (adb has root privileges)
- frandom
- PVS level info
- frandom
- notification led control
- kcal v2
- CRC Check Disabled
- Dynamic filesystem read-ahead
- A lot improvments
- A lot fixes
Download Link CrazyAquaKernel[AnyKernel]:https://www.androidfilehost.com/?w=files&flid=209538
Installation guide
Do NOT flash this over other custom kernels!
You should only flash CrazyAquaKernel over the kernel that came with your ROM!!
- Download Kernel from this thread
- Flash it with Recovery
[Wipe cache and Dalvik cache recommended]
- Then Reboot
Enjoy the CrazyAquaKernel !!!!
Credits
thx Eliminater74
thx Faux123
thx Savoca
thx RenderBroken
thx flar2
thx osm0sis
thx ShinyShide
thx bhb27
thx Lord Boeffla
thx the devs where made the cm14 bootable and working
thx CrazyGamerGR yeh me
XDA:DevDB Information
CrazyAquaKernel, Kernel for the Xiaomi Mi 5s
Contributors
CrazyGamerGR
Source Code: https://github.com/CrazyGamerGR/CrazyAquaKernel-xiaomi-sd820-sd821-los
Kernel Special Features:
Version Information
Status: Testing
Created 2017-08-24
Last Updated 2017-08-24
FAQ
Recommended app : Kernel Adiutor
changelogs
v1.0/24-08-17
- initial release
v2.0/4-9-17
- input boost
- frandom
- msm thermal
- many improvments under the hood
reserve1
reserve2
reserve3
First of all thanks for your efforts.
One question before I proceed, does this kernel need specific boot loader (like mm boot loader)? Does work on AOSP based rooms, like du, aex?
macwindows said:
First of all thanks for your efforts.
One question before I proceed, does this kernel need specific boot loader (like mm boot loader)? Does work on AOSP based rooms, like du, aex?
Click to expand...
Click to collapse
It work with every LOS based rom
Sent from my iPhone using Tapatalk Pro
Thanks for the kernel.
Did you have to do any changes to Lineage code base to get it to boot on Nougat bootloader?
Gingernut78 said:
Thanks for the kernel.
Did you have to do any changes to Lineage code base to get it to boot on Nougat bootloader?
Click to expand...
Click to collapse
Nah its just an updated los kernel with a few features,if the los rom work with your bootloader should work with my kernel too no need older bootloader i believe
Sent from my iPhone using Tapatalk Pro
CrazyGamerGR said:
Nah its just an updated los kernel with a few features,if the los rom work with your bootloader should work with my kernel too no need older bootloader i believe
Sent from my iPhone using Tapatalk Pro
Click to expand...
Click to collapse
Gonna give a test.
I asked cause I was unable to get my kernel to boot with Lineage source code with modifications, only the necessary changes to get it to compile when building standalone.
Worked better then others on lastest RR. Thanks! DT2W works after flashing kernel and no bootloop.
what about miui version
nos1609 said:
Worked better then others on lastest RR. Thanks! DT2W works after flashing kernel and no bootloop.
Click to expand...
Click to collapse
Thx for feedback m8
Sent from my iPhone using Tapatalk Pro
zjy2200656 said:
what about miui version
Click to expand...
Click to collapse
Maybe soon m8
Sent from my iPhone using Tapatalk Pro
CrazyGamerGR said:
Maybe soon m8
Click to expand...
Click to collapse
Plz make the kernel for miui...! Thx
Addymore said:
Plz make the kernel for miui...! Thx
Click to expand...
Click to collapse
I will try soon m8
Sent from my iPhone using Tapatalk Pro
CrazyGamerGR said:
I will try soon m8
Click to expand...
Click to collapse
Thx for ur efforts....
Addymore said:
Thx for ur efforts....
Click to expand...
Click to collapse
Np m8 ^^
Sent from my iPhone using Tapatalk Pro
CrazyGamerGR said:
I will try soon m8
Click to expand...
Click to collapse
Thank you. There isn't any custom kernel for miui roms and there are several for non-miui roms.
Would be great to see oc, battery control, ntfs support etc on miui 9.
Thank you
CrazyGamerGR said:
Maybe soon m8
Sent from my iPhone using Tapatalk Pro
Click to expand...
Click to collapse
thanks for your work ，can you add voltage contron
Hybrid kernel is designed to increase performance, improve battery efficiency and improve security than stock Kernel. Combined some goodies from CAF, Linux-stable, Google common kernel and other well-known Android kernels.
Before flashing, please make sure you have an unlocked bootloader.
Supported devices:
ATU-L11
ATU-L21
ATU-L22
ATU-L31
ATU-L42
Before you flash, have a backup of our current kernel. Follow my guide here.
How to flash?
If you don't have a twrp yet, download twrp.img from the download link and copy it to your computer. Backup your current recovery by following this guide. Flash twrp using this command on your computer:
Code:
adb reboot bootloader
fastboot flash recovery_ramdisk twrp.img
If you already have twrp, download the kernel zip file and copy it to either external sdcard or to /cache. This is because twrp can't properly see internal storage as it is encrypted
Please use Kernel Adiutor from Play Store if you want to customize the kernel settings
Credits:
@nathanchance
@Sultanxda
@arter97
@franciscofranco
@Lord Boeffla
@eng.stk
Do you like my work? Perhaps you may want to consider donating?
Downloads:
https://drive.google.com/folderview?id=1JMYI66HVK6MxmJUYlBDJXt5Gb2vOfALf
Source code: https://github.com/pascua28/android_kernel_msm8917_ATU
Features:
Latest Linux-stable updates
Latest CAF msm-3.18
Upstream CFQ changes
Compiled with Snapdragon LLVM and Ubertc GCC 7.x Linaro GCC 7.x with O3 optimizations
Clarity, blu_active, Alucard, darkness, nightmare CPU governors
Zen, maple, sio, fiops, vr, sio, sio plus, tripndroid, cfq I/O schedulers
Voltage control
Adreno IDLER
KCAL Color Settings
Overclocked GPU upto 650MHz
Overclocked ISP
Boeffla wake lock blocker
Quick power on driver
LZ4 zcache
arm64-accelerated crypto algorithms
CRNG based random driver
Fast random driver
Power-efficient workqueues
USB Fast Charge
Updated RCU to Linux 4.4
Updated zsmalloc, zbud, zpool, zswap and zram to Linux 4.4
Reserved
Reserved
Will try this now I will report later after flashing this kernel
Just getting bootloop
sh0w 0f said:
Just getting bootloop
Click to expand...
Click to collapse
Are you on stock rom?
pascua28 said:
Are you on stock rom?
Click to expand...
Click to collapse
Yes I was on stock ROM but now I'm in Crdroid os
sh0w 0f said:
Yes I was on stock ROM but now I'm in Crdroid os
Click to expand...
Click to collapse
Crdroid? There is still no Crdroid rom for Y6 2018 version. Are you sure your device is listed in the first post?
Works fine, good performance, no battery drain and well written code, thanks for bringing it to us!
Best regards, iDecrypt
waiting for the gapps and su version.
nafis5566 said:
waiting for the gapps and su version.
Click to expand...
Click to collapse
It's a Kernel not a Rom
iDecrypt said:
It's a Kernel not a Rom
Click to expand...
Click to collapse
Extremely sorry was going to comment on lineage os section but accidently posted here.
kernel huawei y6 prime 2018
Just getting bootloop
_OldFox said:
Just getting bootloop
Click to expand...
Click to collapse
What model?
ATU-L31
_OldFox said:
ATU-L31
Click to expand...
Click to collapse
Did you update your phone to 8.0.0.142?
No. I have 8.0.0.130(C432).
_OldFox said:
No. I have 8.0.0.130(C432).
Click to expand...
Click to collapse
Could you try updating? And also, can you send me the kernel image backup? The kernel image is based on 8.0.0.140. Meanwhile, I'll just remove ATU-L31 from supported devices until I upload a separate file for it. Sorry for the inconvenience caused.
Bootloop on version 142