Database Develop

[DISCONTINUED] [8.1.x][OFFICIAL][DISCONTINUED] CarbonROM | cr-6.1 [kagura]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CarbonROM is an aftermarket firmware based on the Android Open Source Project. We are dedicated to fast, stable, and feature-filled roms, honesty and communication with our users, and openness with our code. We like frequent builds, with the very latest and greatest hardware support and fixes. We strive to not only provide you with the best rom we can build, but also to give back to the Android community and our fellow developers. For us, this is about creating something we can be proud of and hope you will enjoy.
Please feel free to look, build, and use our code at CarbonROM's GitHub... and at CarbonROM Gerrit.
Disclaimer:
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device, family, pets, or perception of reality. We ask that you do your part to know your device and know how to recover from problems before you flash!
Support:
We spend an astonishing amount of time developing this software. We can't spend much time on XDA as a result, so if you need support, please try the following:
1) Search. Search, search, search. Yes, you. I don't care how unique or important your question is, it's very likely someone has adressed it already. Especially if you're even close to new at this.
2) Read our FAQ, which can be found on our website. Carbon FAQ
3) Ask a question in your device forum. Someone will no doubt try to help you. Warning: this help may come in the form of telling you it's a dumb question that has been asked before. See step 1 - such are the perils of asking questions when you haven't done the research yourself. Android is about helping yourself.
4) Join our Discord server! There, you can connect with other Carbon users and our developers, and you can get quicker responses to your bug reports. The invite link is right below.
We recommend MindTheGApps. OpenGApps should work, but please make sure you clearly mention the gapps you're using when reporting bugs.
Notice:
For this ROM to work you need to use the latest ODM Images. If you need additional guidance on how to do that, please refer to Sonys Guide on how to flash an ODM Image.
Get CarbonROM
Changelog
Join the CarbonROM Discord server
GitHub
Gerrit
Kernel source
Remember, every penny you send to us goes right back into the rom. It's used for hardware, server costs, etc - all the things that help us make Carbon better with every release. Your support means the world to us! If you've enjoyed Carbon, please consider a donation toward this goal. Thank you, and we hope you continue to enjoy Carbon!
XDA:DevDB Information
CarbonROM, ROM for the Sony Xperia XZ
Contributors
Myself5, CarbonROM
Source Code: https://github.com/CarbonROM
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Nightly
Created 2018-03-31
Last Updated 2018-07-19

No one tried this rom yet? I have a problem over here. It keeps asking for password after the CarbonROM logo even though I wipe everything clear, any ideas? What I was doing was flash 41.3.A.2.99 with everything wiped, flash ODM, flash TWRP, flash the rom and then Pico OpenGapps. Something wrong with my procedure? Thanks in advance.
EDIT1 : Oh yeah, forgot to mention my device is F8332, it isn't supported?

LuthfiKun said:
No one tried this rom yet? I have a problem over here. It keeps asking for password after the CarbonROM logo even though I wipe everything clear, any ideas? What I was doing was flash 41.3.A.2.99 with everything wiped, flash ODM, flash TWRP, flash the rom and then Pico OpenGapps. Something wrong with my procedure? Thanks in advance.
EDIT1 : Oh yeah, forgot to mention my device is F8332, it isn't supported?
Click to expand...
Click to collapse
Use the "format data" option in TWRP to get rid of encryption, wipe doesn't clear encryption. If coming from stock, thats necessary unfortunately due to differences in the encryption used. Otherwise (if coming from AOSP) the password its asking for would be the one you used before.

Dual sim support?

Myself5 said:
Use the "format data" option in TWRP to get rid of encryption, wipe doesn't clear encryption. If coming from stock, thats necessary unfortunately due to differences in the encryption used. Otherwise (if coming from AOSP) the password its asking for would be the one you used before.
Click to expand...
Click to collapse
Alright format it is.
agentsandy007 said:
Dual sim support?
Click to expand...
Click to collapse
No it isn't. At least out of the box. You can find a patch on Sony AOSP Build thread.

Volte Supported??

First of all, thanks alot @Myself5 and all other devs, who are working hard to bring this to our XZ :good:
My experiences after 1 day:
- rom is very smooth and snappy.
- root via Magisk v16 & Xposed 90.1-beta3 (systemless) works flawlessly
- the fp sensor always works, but it's not as sensitive as with stock
- night light worked - until I've installed Substratum and a Substratum theme, but after that it doesn't work anymore (even after deactivating, uninstalling the theme, a system restart and deinstalling the Substratum app it sill doesn't work). Also a dirty flash of the rom.zip didn't help to get it working again.
- the build-in camera takes acceptable pics (not as well as the stock camera, but acceptable); also focussing is a little slower than stock. Another thing is, it's not possible to chance the location to save the pics to the ext. sdcard.
- formatted as a portable storage, the ext. sdcard item on the left of the status bar can't be removed (see attachement)
- the battery consumption is a bit high (from 100 % to 98 % in 1 h - without doing anything)
But in the whole, it's really promising for th 1st official build :good::good::good:

Klaus N. said:
First of all, thanks alot @Myself5 and all other devs, who are working hard to bring this to our XZ :good:
My experiences after 1 day:
- rom is very smooth and snappy.
- root via Magisk v16 & Xposed 90.1-beta3 (systemless) works flawlessly
- the fp sensor always works, but it's not as sensitive as with stock
- night light worked - until I've installed Substratum and a Substratum theme, but after that it doesn't work anymore (even after deactivating, uninstalling the theme, a system restart and deinstalling the Substratum app it sill doesn't work). Also a dirty flash of the rom.zip didn't help to get it working again.
- the build-in camera takes acceptable pics (not as well as the stock camera, but acceptable); also focussing is a little slower than stock. Another thing is, it's not possible to chance the location to save the pics to the ext. sdcard.
- formatted as a portable storage, the ext. sdcard item on the left of the status bar can't be removed (see attachement)
- the battery consumption is a bit high (from 100 % to 98 % in 1 h - without doing anything)
But in the whole, it's really promising for th 1st official build :good::good::good:
Click to expand...
Click to collapse
Hello, is the battery life when used good ? As good as stock ?
And does it have that bug when if you record video the result will be green ?

Can you upload screen recording of rom from home to settings and other functions.

I plan on flashing this soon, but I figured I'd tell you, your link to the Carbon FAQ is broken.

ilininja said:
Hello, is the battery life when used good ? As good as stock ?
And does it have that bug when if you record video the result will be green ?
Click to expand...
Click to collapse
The battery consumption while in use is ok. But my device doesn't go into deepsleep while the screen is off. So I had lost about 23 % in 10 hrs - leaving the device untouched!
Video recording works; I haven't noticed that bug.
Saroj11488 said:
Can you upload screen recording of rom from home to settings and other functions.
Click to expand...
Click to collapse
Sorry, I went back to stock for now, as there's a new stock fw (41.3.A.2.107).

I have a few bugs to report. First, the fingerprint sensor is extremely slow, about half or even one third of the speed compared to stock. Second, could you guys please fix the deepsleep? That one is not working for now. And third, Night Light does not work at all...
Thank you for updating the XZ to Android 8.1 I am glad to see carbon rom on this device although it is not that stable for now.

Really nice ROM and I'm looking forward to make this my daily driver, I tried it for two days and these are the bugs I found:
1: GPU performance is really bad with 2d games and google maps lagging all the time when they never do on stock
2: CPU performance is inferior compared to stock, especially single threaded
3: enabling 120 hz display won't do anything and the settings or UI will crash when leaving the page
4: fingerprint seems to be sometimes less responsive, usable but can be improved
Camera is not so bad and the modded google camera works well, hopefully this will become the first proper AOSP based platform for this device that has only seen failures until now, keep up the good work.

Can I dirty flash this rom for just update?
I use Carbon Rom 3/31 version, but I can't use delta update because my device cannot receive the stock script.
I must change the rom script with Notepad+.
So...can I use dirty flash or....could you manage it?

Thanks for continously updating this rom and thank you for fixing the bug with the fingerprint sensor.
I'm not sure if deepsleep has been fixed but there is a big problem with playing music. I can't even play any music track at all...

Hello, looking forward to make this my daily driver, is it possible ?
What I would want is decent battery life and camera.

Hello. I tried to listen to music after installing the ROM, but the earphones are disconnected as soon as they are connected to the smartphone.
The earbuds pfe 132 and are made up of earphones with an iphone microphone.

L'ily said:
Clean flashed the 10th build along with Rytekk's dual-SIM patch, Pico Open GApps and Magisk 16.3 to my F8332 and other than that annoying SD notification (which can be banished to the notification drawer by making System UI notifications low priority) and Night Light not working, the only other major issue raised ITT of the CPUs not entering Deep Sleep is fixed according to Adiutor.
Great stuff. I haven't been able to standardise on one ROM since the CM days (interesting side note, it looks like you built the kernel for the NOCT build on my Z2 tablet).
I recommend this to anyone for daily use. Also, lower your expectations to realistic levels guise. I remember when XDA threads were for flagging major broken functionality, not complaining that a few amateur enthusiasts weren't putting out work that competed on every indicator against the finished product of a multibillion-dollar for-profit international conglomerate.
Sent from my Sony Xperia XZ using XDA Labs
Click to expand...
Click to collapse
Could you please give a link to that dual SIM patch?I have flashed this ROM on my F8332 successfully but none of my SIM cards works

Hello, with the 10th build I have a problem with the installation, it keeps telling me that Google services framework stopped.
Any help ?
(V11 vendor image odm, formated data)

BigMixman said:
Could you please give a link to that dual SIM patch?I have flashed this ROM on my F8332 successfully but none of my SIM cards works
Click to expand...
Click to collapse
Add these lines in build.prop, and reboot.
Code:
persist.multisim.config=dsds
persist.radio.multisim.config=dsds
ro.telephony.default_network=9,0

[Official][PIE] AOSCP (CypherOS project) [P20 pro]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​
This is CypherOS. An extension to the pure Android. Cypher tries to maintain the purity of Android while offering the most useful features to the users. The goal is to give the highest level of performance whilst achieving Simplicity.​
· Ambient Display and Ambient Weather by Chris
· Internal Color Manager by Chris
· "Now playing" in lockscreen by Chris
· Statusbar - Quick pulldown, Smart pulldown, Network traffic indicators, Statusbar icon customization, Carrier Labels, Clock and Date custimization.
· Quick Settings - QS rows and columns, Wi-Fi easy toggle, Data easy toggle and more
· System - Screenshot types (Fullscreen and Partial area select)
· Notifications - Force expanded notifications, Show notification count, Heads up customization, and Notification LED control.
· Battery LED customisation
!!! Flash on your own risk !!!
We will not take any responsibility for bricked devices or lost data. So please watch out!
If you are coming from stock EMUI:
- WIPE data and cache in stock recovery_ramdisk
- While plugged in, hold vol down during reboot to boot to bootloader
- Flash TWRP in recovery_ramdisk partition
- fastboot reboot and unplug cable and hold vol up until you see the TWRP logo
If you are coming from another rom:
- Format data in stock huawei recovery before flashing AOSCP
- *if your p20 pro doesn't boot after flashing the rom, flash the stock PIE KERNEL.img to kernel partition.
If you are already running AOSCP:
- Reboot to TWRP
- Flash rom, gapps (Always flash gapps because only the official builds support OTAs)
- Reboot and
- Enjoy CypherOS on your device!
NOT ADDED YET
[01/02/19]
- Initial release
[05/02/19]
- Fixed bluetooth A2DP
- Fixed gps accuracy
[06/02/19]
- Notch placement fixed
[09/02/19]
- FRP Navigation fixed
[11/02/19]
- Gralloc error : buffer descriptor contains invalid usage bits 0x4000000 fixed | but Neflix still has gralloc issues to be fixed
- Added Network Traffic on expanded notification area
- Added battery styles on status bar
UNOFFICIAL TWRP maintained by me
Official AOSCP Website
AOSCP Unofficial builds by me
Open Gapps ARM64 9.0
Always download latest build of TWRP and ROM
Root with Magisk NOT TESTED , I got no idea. Problems with root should be in Magisk thread, do not even ask me
Code:
​
Join the Community CypherOS on G+
Join us in Crowdin CypherOS on Crowdin to help us get AOSCP to your language
Join our help Community​
- CypherOS
- LineageOS
- LuK1337
- and me ofc
​
XDA:DevDB Information
[Official][PIE] AOSCP (CypherOS project) [P20 pro], ROM for the Huawei P20 Pro
Contributors
kessaras
Source Code: https://github.com/CypherOS
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: 9.0.0.195 also read post #3
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 7.0.0
Stable Release Date: 2019-02-01
Created 2019-02-01
Last Updated 2019-06-16

Reserved
(in this post i will edit and add useful links and information)
1 )
just in case you don't already know it, when you dirty flash an update of my unofficial builds, you also have to dirty flash your gapps package too.
Only in the official builds the OTA can survive the gapps installation.
2)
For Huawei camera app --> press here

Reserved
i will use this post to make announcements.
Its easier to see announcements here.
Keep in mind that im working way too many hours and i won't be able to maintain it daily.
Thank you for your understanding.
1 )
You need firmware 9.0.0.195 or newer.
Any firmware update since v195 has the same kernel, they are only security patches and minor bug fixes in EMUI 9.
Currently i'm at v270 and everything is fine. If you are already on v195 or newer , there is no reason at all to update to the latest because we only need the kernel, we don't care about the EMUI security patches and fixes.

NFC and Stock Camera are working?

Hi,
i have a Big problem.
I have a p20 pro with emui 8.1 and patch november 2018.
I want test modding rom but is impossible unlocked the bootloader.
I ask a ministry of solution but i said that impossible because P20 is totaly blocked.
Please give me a solution!!!!
Best regards

gvflavio said:
NFC and Stock Camera are working?
Click to expand...
Click to collapse
Sorry I can't test nfc with payments. For file transfer it works.
The problem is that in Greece we are 500 years behind. Until we start using nfc payments here , in other countries people will use aeroplanes instead of cars.
Yes stock camera app of aoscp works. Also Google camera mods work. I don't know about the Huawei camera app, I don't have time to test.
GPS navigation has some issue but I already fixed it and I'm pushing an update.
I also fixed aspect ratio and if you or anybody else finds a bug , report it asap with a logcat.
fenice666 said:
Hi,
i have a Big problem.
I have a p20 pro with emui 8.1 and patch november 2018.
I want test modding rom but is impossible unlocked the bootloader.
I ask a ministry of solution but i said that impossible because P20 is totaly blocked.
Please give me a solution!!!!
Best regards
Click to expand...
Click to collapse
You can't.
Locked means locked. Sorry.
There is a way to unlock but it needs an algorithm to run and test bits until it finds your unlock code.
And since I don t see many devs here , I don t think that anyone will do that and make this algorithm.
Only if you pay to unlock it.

kessaras said:
Sorry I can't test nfc with payments. For file transfer it works.
The problem is that in Greece we are 500 years behind. Until we start using nfc payments here , in other countries people will use aeroplanes instead of cars.
Yes stock camera app of aoscp works. Also Google camera mods work. I don't know about the Huawei camera app, I don't have time to test.
GPS navigation has some issue but I already fixed it and I'm pushing an update.
I also fixed aspect ratio and if you or anybody else finds a bug , report it asap with a logcat.
You can't.
Locked means locked. Sorry.
There is a way to unlock but it needs an algorithm to run and test bits until it finds your unlock code.
And since I don t see many devs here , I don t think that anyone will do that and make this algorithm.
Only if you pay to unlock it.
Click to expand...
Click to collapse
no problem for pay.
But the real problem is that i don't find nothing in internet.
exemple:
ministry of solution is out of service for P20 pro....

fenice666 said:
no problem for pay.
But the real problem is that i don't find nothing in internet.
exemple:
ministry of solution is out of service for P20 pro....
Click to expand...
Click to collapse
I don't know. Me I asked for my unlock code as soon as I read that Huawei is going to stop giving codes and I used it when I decided that I want to develop something here.
The only thing , kind of reliable, I found with a Google search is here : https://forum.xda-developers.com/huawei-p20-pro/how-to/bootloader-unlock-service-t3852447
But I don t really know personally if they are reliable.
I hope you can all unlock it and I hope I see some life here soon.

Thanks kessaras for bringing this ROM to the P20 Pro was a big fan on AOSCP CypherOS back on my OnePlus 3 great ROM

This is great GREAT News!!!!
Everything works fine with this rom? NFC? USB C Headphones? Dual Speakers?

kessaras said:
i will use this post to make announcements.
Its easier to see announcements here.
Thank you for your understanding.
Click to expand...
Click to collapse
Ooooh this looks interesting
Brilliant to see you here.
Awesome work.
Currently using AOSIP which is an Honor view 10 ROM but works for the p20 pro, 8.1 though. Need to update to pie and get this running.
Have you added a tweaks section into the ROM? As in screen off animation, quick settings, status bar tweaks??
Great that this is here though

dladz said:
Ooooh this looks interesting
Brilliant to see you here.
Awesome work.
Currently using AOSIP which is an Honor view 10 ROM but works for the p20 pro, 8.1 though. Need to update to pie and get this running.
Have you added a tweaks section into the ROM? As in screen off animation, quick settings, status bar tweaks??
Great that this is here though
Click to expand...
Click to collapse
We don't have a tweaks menu here. Aoscp is pure aosp plus a few and only most important modules scattered in settings accordingly.
And thank you, I hope I see more people unlocking their p20 pro and join us.
I will fix as many bugs I can in p20 pro , but I don't know about our poor TWRP. I know how to fix some minor stuff there but I don't know how to fix the decryption. So that's something I won't touch.

"E3004: This package is for device: charlotte, kirin970; this device is hi6250.
Updater process ended with ERROR: 7"
WTF am I doing wrong ?

kessaras said:
We don't have a tweaks menu here. Aoscp is pure aosp plus a few and only most important modules scattered in settings accordingly.
And thank you, I hope I see more people unlocking their p20 pro and join us.
I will fix as many bugs I can in p20 pro , but I don't know about our poor TWRP. I know how to fix some minor stuff there but I don't know how to fix the decryption. So that's something I won't touch.
Click to expand...
Click to collapse
Nah it's cool man, I unlocked mind day one back in may :good:
I haven't jumped over to pie just yet, but I'd be flashing this when I do..
The install process is mental lol, compared to OnePlus / HTC etc.
I only asked about the tweaks add there are some that I quite like and not all ROMs trend to have them.
CRT screen off animation being one of them, pointless but looks superb, disabling a few status bar icons and the built in theming is a given, white looks horrible.
I think so long as you decrypt, twrp should be ok to some extent.

JetlagFunk said:
"E3004: This package is for device: charlotte, kirin970; this device is hi6250.
Updater process ended with ERROR: 7"
WTF am I doing wrong ?
Click to expand...
Click to collapse
Hi6250 is p8 lite 2017.
Charlotte is p20 pro
dladz said:
Nah it's cool man, I unlocked mind day one back in may :good:
I haven't jumped over to pie just yet, but I'd be flashing this when I do..
The install process is mental lol, compared to OnePlus / HTC etc.
I only asked about the tweaks add there are some that I quite like and not all ROMs trend to have them.
CRT screen off animation being one of them, pointless but looks superb, disabling a few status bar icons and the built in theming is a given, white looks horrible.
I think so long as you decrypt, twrp should be ok to some extent.
Click to expand...
Click to collapse
Forget the crt animation. Useless... ?
Wait a few days. I will attempt to fix the TWRP decryption one of these days. I'm syncing today for the first time and build a debug TWRP build.
JetlagFunk said:
Hi Kessa, thanks for the reply.
The thing is, I have a CLT-L29, not a P8 Lite. Twrp is giving false infos.
Any idea why it's doing this ?
Click to expand...
Click to collapse
mate in twrp thread. i don't want to populate the rom thread with OT questions.
The reason is maybe because you are not using the official TWRP for charlotte.
https://eu.dl.twrp.me/charlotte/
if thats not it, then i don't know. Maybe contact me in telegram tomorrow that i will have my hands in a TWRP debug build to give you link to flash it too and then you give me logs.
Until then , if you flash the official and it keeps saying that you have a p8 lite, share your recovery log to @a1Pha or @LuK1337.
The recovery.log will tell us why that happens.

Hi Kessa, thanks for the reply.
The thing is, I have a CLT-L29, not a P8 Lite. Twrp is giving false infos.
Any idea why it's doing this ?

JetlagFunk said:
Hi Kessa, thanks for the reply.
The thing is, I have a CLT-L29, not a P8 Lite. Twrp is giving false infos.
Any idea why it's doing this ?
Click to expand...
Click to collapse
Are you using TWRP for the P8 Lite? get the P20 Pro TWRP from the official site

Hey everyone ! Thanks a lot for the help !
Turns out, the TWRP mod from Petronario80 is not compatible with this zip! Used the twrp-3.2.3-4-charlotte.img from the official website, and I was good to go !

JetlagFunk said:
"E3004: This package is for device: charlotte, kirin970; this device is hi6250.
Updater process ended with ERROR: 7"
WTF am I doing wrong ?
Click to expand...
Click to collapse
Same here.

gvflavio said:
Same here.
Click to expand...
Click to collapse
The answer is literally in the post above yours

[ROM] [OFFICIAL] [9.0] Pixel Experience [AOSP/CAF/GO] [7 MAY 2019]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience for Xiaomi Redmi Note 3 [Kenzo]​
What is this?​Pixel Experience is an AOSP/CAF/GO based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential features for the proper functioning of the device
Based on Android 9.0
Whats working?
Wifi
RIL
VoLTE (VoLTE badge not seen but it works perfectly)
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
Fingerprint reader
Lights
Sound / vibration
Facelock
Hostpot
Whats not working?
SE Linux : Enforcing
DON'T FLASH GAPPS, ALREADY INCLUDED
Download from Pixel Experience website
Donate
https://drive.google.com/open?id=1racErd31wSUlXUFmhFgOgH-MVwz2Swy_
Translation
Help with project translation
Telegram channel
[email protected]
Credits:
@amanrajOO7(Without him this ROM would not have been possible):highfive:
@AmolAmrit (for device, vendor and kernel trees)
@PE Team​
Build author: @gitsdb
Source code: https://github.com/PixelExperience
ROM Developer: @jhenrique09
XDAevDB Information
PixelExperience Pie, ROM for the Xiaomi Redmi note 3
Contributors
@gitsdb, @amanrajOO7
Source Code: https://github.com/Gitskill99
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.108.x
ROM Firmware Required: TWRP, Unlocked bootloader
Based On: AOSP/CAF/GO
Version Information
Status: Stable
Created 2019-02-15
Last Updated 2019-05-07

Will try it.

does this ROM also has system-wide dark mode like @officialpro unofficial pixel experience?

thanks bro,
2. Sound clear (use this to remove AudioFX from ROM before installing Dolby Atmos): https://openload.co/f/UKMhfKP28Zk/Cl...8sangga).zip
3. Dolby Atmos Pie version (This one has best sound quality at full volume): https://openload.co/f/0D2PDVaziNM/TW...olby_Atmos.zip
link are Not work

ahmet ferid said:
thanks bro,
2. Sound clear (use this to remove AudioFX from ROM before installing Dolby Atmos): https://openload.co/f/UKMhfKP28Zk/Cl...8sangga).zip
3. Dolby Atmos Pie version (This one has best sound quality at full volume): https://openload.co/f/0D2PDVaziNM/TW...olby_Atmos.zip
link are Not work
Click to expand...
Click to collapse
Changed the links....

gitsdb said:
​
Click to expand...
Click to collapse
Okay thanks, how old is your device, does hotspot work ??
I use my phone for 1. Hotspot for my iPad and 2 lots of online music , hopefully the battery will still last.​

Kursem said:
does this ROM also has system-wide dark mode like @officialpro unofficial pixel experience?
Click to expand...
Click to collapse
Yes it does
@visky642 - hotspot works on my device

thanks and We are on track

does this rom has OTA? any screenshot?

Overnight drain about 18% , nothing changed expect ambient display was turned on. Any battery tips ,had really good battery on the first day but seem like it's going down, all apps greenified . Using enabled battery optimisation for gms too battery saver always on

visky642 said:
Overnight drain about 18% , nothing changed expect ambient display was turned on. Any battery tips ,had really good battery on the first day but seem like it's going down, all apps greenified . Using enabled battery optimisation for gms too battery saver always on
Click to expand...
Click to collapse
Turn off ambient display to save battery overall. I also found out a while back that sometimes ambient display doesn't turn off, I'm not sure what causes it but it's like ambient display starts acting like an always on display and that burns our battery since the whole screen have to light up on kenzo. That's most likely what have happened.
I'm not using this rom but the ambient display bug seems to happen on most roms. :good:

JD. A said:
Turn off ambient display to save battery overall. I also found out a while back that sometimes ambient display doesn't turn off, I'm not sure what causes it but it's like ambient display starts acting like an always on display and that burns our battery since the whole screen have to light up on kenzo. That's most likely what have happened.
I'm not using this rom but the ambient display bug seems to happen on most roms. :good:
Click to expand...
Click to collapse
I don't think it's a bug on most roms. There's an option in ambient display setting, the option is "Always on", you might want to turn that off

Tyuzva said:
I don't think it's a bug on most roms. There's an option in ambient display setting, the option is "Always on", you might want to turn that off
Click to expand...
Click to collapse
Yes I know about that option, that exist in some roms. I've been using arrow for a while now so I can't comment on the latest updates of every rom but from my experience ambient display setting seemed bugged more often than not. For example it could go pulsing when a notification appeared for several minutes. It might be fixed now I'm not sure. I don't have that bug on arrow anyway.
It might have been that bug that caused that guys phone to drain 18% over night. I just thought that I should share my experience and hopefully it'll help someone else.

does data encryption work?

"So I will never add or remove any feature for any reason." okay i agree ancek is just really a much needed little plugin.
A really plain and clean rom but troubled screen shutdown with the 3rd part application and the screen dialing with finger touching because of the search app below.
The main screen should be able to remove without asking google search / siri option at the bottom and the home screen must be double click close.
on the contacts of person search a little slow. Please add.
We look forward to your updates

gitsdb said:
DISCLAIMER:
1. If you don't know anything about custom ROMs please don't install this ROM.
2. If anything happens to your phone or you brick you're phone after installing this ROM, I will not be responsible for any damage whatsoever to any one.
3. Your phone warranty may be void.
IMPORTANT INFORMATION:
1. NO FEATURE REQUEST: I have strictly followed official way of building Pixel Experience os for kenzo and have not touched anything after that. I strongly prefer PURE PIXEL EXPERIENCE. So I will never add or remove any feature for any reason.
2. UPDATE CYCLE: I will update once a month (will update only when monthly security patch updated in PE repo)
3. MAINTENANCE TIME: I use this ROM as my daily driver in my Kenzo. So until my phone dies out I will continue building this ROM.
4. BUG FIXING: As I am new to custom ROM building, I can fix bugs present in my device only. However if bugs are very common I will try to fix them.
PREREQUISITES:
1. Officially unlocked bootloader.
2. Latest TWRP (3.2.3.0) installed.
FLASHING PROCEDURE:
1. Reboot to recovery
2. PERFORM FACTORY RESET
3. Wipe Cache, System, Dalvik
5. Flash ROM
6. Reboot system.
UPDATE PROCEDURE :
(ONLY IF YOU HAVE THIS ROM PREVIOUS VERSIONS FLASHED)
1. Reboot to Recovery (Dont wipe dalvik and cache as it will lock data)
2. Flash ROM
3. Flash Agni Kernel v13.8 Pie version (Optional)
4. Reboot
ADD ONS:
1. Agni Kernel v13.8 Pie version: https://drive.google.com/file/d/1IhhDNUt35PUJspemz5LMY-Fh5UPYbtTn/view?usp=drivesdk
2. Sound clear (use this to remove AudioFX from ROM before installing Dolby Atmos): https://drive.google.com/file/d/10aIbo-Ftl2ugxlvWQod5yYpWBN1AivVn/view?usp=drivesdk
3. Dolby Atmos Pie version (This one has best sound quality at full volume): https://drive.google.com/file/d/1QhjI9iuJ0gw2e5Ade70dUmff4Nt1tgtE/view?usp=drivesdk
4. Install Greenify from play store and flash this zip file for making Greenify system app without root: https://drive.google.com/file/d/1biaNuanPLT4gg2qDDGOMXO1vmgAvwUT7/view?usp=drivesdk
ROM DOWNLOAD LINK:
14.02.2019: https://drive.google.com/file/d/1NQmmtg1cMaaSQsmASba_Tp_dVQVgoQLl/view?usp=drivesdk
BUGS:
1. SE Linux - Permissive
2. Android Casting - Not working (However, casting from Youtube works)
3. Video calling not tested
Rest all things perfectly working
IMPORTANT TIPS:
1. To increase Battery Life: Install Greenify and kepp battery saver of ROM ALWAYS ON. SOT (Moderate usage): 6-7 hours
2. To make Google Pay (or any payment app) to work: Go to settings --> Apps --> Disable Action Services --> Go to Google Play Services --> Disable SMS and Phone. Now Google Pay will work. Do your work and Enable everything afterwards.
CREDITS:
1. @iamansingh (Telegram) - Thanks to him that i was able to compile this ROM.:highfive:
2. @AmolAmrit - for his kernel, device and vendor trees
3. @PixelExperience Team
4. @xda
5. @google and Internet
Donation:https://drive.google.com/open?id=1racErd31wSUlXUFmhFgOgH-MVwz2Swy_
Kernel:https://github.com/AmolAmrit/Escrima_kernel_xiaomi_msm8956
Vendor:https://github.com/AmolAmrit/proprietary_vendor_xiaomi
Device: https://github.com/AmolAmrit/device_xiaomi_kenzo
ROM Source:https://github.com/PixelExperience
ROM OS Version: 9.0 Pie
ROM Kernel: 3.10.108.x
Version Information:
Status: Stable
Based on: AOSP
Security Patch Level: 5 February 2019
Click to expand...
Click to collapse
Will greenify work on pie? Also can you make the selinux status as "restricted"?

Anand_theGeek said:
Will greenify work on pie? Also can you make the selinux status as "restricted"?
Click to expand...
Click to collapse
Yes Greenify is working super fine...I am using it... But to get best out of app flash Magisk module provided by me in my first post... No need to use Magisk for flashing this module... NO DON'T TRY SELINUX ENFORCING OTHERWISE PHONE MAY ENTER IN BOOT LOOP!!!

ahmet ferid said:
"So I will never add or remove any feature for any reason." okay i agree ancek is just really a much needed little plugin.
A really plain and clean rom but troubled screen shutdown with the 3rd part application and the screen dialing with finger touching because of the search app below.
The main screen should be able to remove without asking google search / siri option at the bottom and the home screen must be double click close.
on the contacts of person search a little slow. Please add.
We look forward to your updates
Click to expand...
Click to collapse
Though I am not able to complete understand what you want to say but looks like you want some features to be added in Android pixel launcher... WHICH IS NOT POSSIBLE... YOU CAN USE THIRD PARTY LAUNCHER LIKE ROOTLESS LAUNCHER... Edit whatever you want in that launcher (excellent launcher).. Regarding slow search in contacts I personally tested it and it's fine here..

Kursem said:
does data encryption work?
Click to expand...
Click to collapse
No it doesn't work..

JD. A said:
Yes I know about that option, that exist in some roms. I've been using arrow for a while now so I can't comment on the latest updates of every rom but from my experience ambient display setting seemed bugged more often than not. For example it could go pulsing when a notification appeared for several minutes. It might be fixed now I'm not sure. I don't have that bug on arrow anyway.
It might have been that bug that caused that guys phone to drain 18% over night. I just thought that I should share my experience and hopefully it'll help someone else.
Click to expand...
Click to collapse
No ambient display problem here... Also overnight drain with 4G data always on in my phone is 4-5%.. Which can reduce to 2-3% if I switch off mobile data... You might have this problem because battery is not properly calibrated... Let phone discharge completely and charge phone upto 100% in switched off condition.. Than discharge it again till it switched off itself... Than charge to 100% in switched off condition again and now battery is properly calibrated.. If problem still persist than most probably battery has reached its end of life (EOL)..

[ROM][9.0.0_r52][A2017X][UNOFFICIAL] ArrowOS 9.x

YAPR [YET ANOTHER PIE ROM]​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ABOUT
ArrowOS is an AOSP/CAF based project started with the aim of keeping things simple, clean and neat.
Website: https://arrowos.net
Telegram: Channel | TG Portal/Links
Github: https://github.com/ArrowOS
Code Review: review.arrowos.net
E-mail: arrowos.contact
PayPal: Click here (read more on our website)
Checkout more documentation at (maintainership/contributing): Check this out
WHAT WORKS?
Almost everything
WHAT DOESN'T WORK?
You tell me
Be sure to include a log : check how to
DOWNLOADS
ROM:
ArrowOS 9.x
Arrow-v9.0-axon7-UNOFFICIAL-20191117
LATEST Arrow-v9.0-axon7-UNOFFICIAL-20200126
Gapps: Click Here for GApps
Note : Pico, Nano or Micro Gapps are recommended.
ROM Source: https://github.com/ArrowOS
--------------------------------------------------------------------------------------------------------------------------------------
Installation :
1. wipe system, vendor, data, cache
2. install ROM
3. GApps, Magisk
4. reboot
Contributors
@raystef66
Credits to
ArrowOS Team
LOS Team
KERNEL SOURCE: https://github.com/OrdenKrieger/andr...el_zte_msm8996 thnx @OrdenKrieger
ROM OS Version: 9.x PIE
ROM Kernel: Linux 3.18.x
ROM Firmware Required: Unlocked Bootloader, Latest TWRP Recovery
Based On: LineageOS device, vendor, kernel
Version Information : 9.x
Status: Pure & Stable...afaik
Sec. Patches : 2020.01.05
Created : 2019.10.12
Last Updated : 2020.01.26

Thanks Raystef66, I'm using this ROM as of tonight. I have successfully upgraded from AOSP 6.5 (May) on my A2017 (chinese).
Much smoother and quicker, although that is expected with a new ROM install after so long! I hope to give you more feedback.
Dungeon Maker had issues installing, which i think may be due to CTSmismatch in magisk (v20). I still have not been successful in passing it.
Do you have a kernel recommended? Or which kernel do you have with this ROM?
Thank you for all of your hard work in keeping the Axon7 ROMs active.

darth_antz said:
Thanks Raystef66, I'm using this ROM as of tonight. I have successfully upgraded from AOSP 6.5 (May) on my A2017 (chinese).
Much smoother and quicker, although that is expected with a new ROM install after so long! I hope to give you more feedback.
Dungeon Maker had issues installing, which i think may be due to CTSmismatch in magisk (v20). I still have not been successful in passing it.
Do you have a kernel recommended? Or which kernel do you have with this ROM?
Thank you for all of your hard work in keeping the Axon7 ROMs active.
Click to expand...
Click to collapse
Install MagiskHidePropsConfig and Busybox and run "props" via terminal and choose f.e. the axon7 oreo FP. You'll pass cts. I run magisk 20.0 and all ok.
I suggest installing the RC1.2 kernel which you can find HERE.
In my next build I was planning to take that one within the ROM. But you can install it without probs tho
Btw, picture below is on new crDroid but MHPC should give u the same results on ArrowOS

Thanks Ray, I appreciate your reply and knowledge of this.
The app updated and worked without needing the ctsmismatch pass, so i'll just wait for your update.
In the 3 days since I've been using this ROM, I can appreciate the following coming from AEX 6.5. A freshly installed ROM does have some of these benefits so I'm probably biased.
1. Arrow has a faster boot into the rom. the loading screen is awesome and the loading effect is great.
2. Arrow uses half as much ram, 1.7gig compared to 3.2gig. This is probably a fresh install thing though, as i have a lot less apps now.
3. quicker and cleaner.
Thanks, the only thing i hope you have in future builds is the cts, and the option for when you reset the phone, there are the extra options to boot into recovery.
*found this option under 'buttons' in the android menu, apologies.
Ive been using this for a month now and its been awesome.
The only bug or issue I've had is the dictionary and auto-correct. Auto-correct does not work at all, and it doesnt recognise mis-spelt words. Android keyboard seems to have limited option.
Thank you for developing this ROM.

NEW ARROW BUILD 2019.11.17
Arrow-v9.0-axon7-UNOFFICIAL-20191117
changelog :
* november sec. patches
* added RC1.2 baddar kernel
* added proper thermal fix

Hi raystef66,
Thank you so much for your great efforts and sharing with this amazing ROM.
The only issue for me is so far - Gesture Typing of AOSP Keyboard is not working.
I have checked its setting to make sure the gesture typing function turned on, but still not working.
Is it experiencing only me? how about other people?
I'm sure that this is an ignorable minor bug for me, otherwise this ROM is finely matured exquisite PIE ROM.
In the next update, however, would you mind adding the advanced settings option?
Thanks again.

BUILD 2019.11.17 First Impressions
Pretty happy with this ROM coming from the most recent (now deprecated) Lineage 15.1 Official Nightly and really loving Arrow.
The only thing I'm missing is the ability to slide finger on status bar to adjust brightness.
I noticed the battery life seems noticeably better. I was hours away from replacing my Axon due to the battery just being horrible, even after being recently replaced. Everything seems buttery smooth besides the Gcam app I'm using. It works, but very sluggish.
Please do recommend your favorite camera app for this ROM.
I'm passing SafetyNet after installing Pixel Android 9 Props.
GPS took over a minute to get a lock the first time around, but now works within 15 seconds as expected.
USB tethering has been temperamental. I disabled hardware acceleration via Developer Settings and it seems to be working better.
I can confirm that swipe texting on AOSP keyboard does not work, however works fine with Gboard.
Hardware keys work as expected however even with the home button Long Press Action set to activate Google Assistant it does nothing. It seems that the Google Assistant action does not work with any of the button settings including the on screen navbar.
I haven't been able to get USB-OTG to work on any ROMs since ditching stock. Maybe someone knows a fix. It doesn't work in TWRP either, so maybe it's my hardware.
Besides a few minor quirks, I am hugely grateful for this ROM providing Pie and rekindling my love for this aging Axon. Thank you!

Swipe typing on the aosp keyboard just means it's missing the libs. Seen it before. Last I checked open gapps aroma let you restore the libs.. But using a different keyboard is a better idea.

Thank you for the update and fixes! Still using this since September.
As above, the keyboard (and in my case, autocorrect doesnt work as well as other roms) is the only thing thats not going so great.
Apart from that, its flawless. Thank you again!

Hi,
Thank you for this very good ROM!
Tested several days, I only noticed a bug in the Google camera with the GAPPS stock. When the application is updated, it stops working.
I also wonder if wifi calls work. Maybe I didn't find the right option to activate them.
(and the GPS sometimes remains blocked at a location and does not update itself).
Everything else is perfect!

Wi-Fi access point and usb modem do not work ....
Wi-Fi access point and usb modem do not work .... sometimes attempts to turn on those options cause a system lock and forced hard reset
PS I turned off hardware acceleration as someone wrote here - USB tethering works ... the problem with the wireless hot spot remains ...
PS2 I don’t know why, but during a 10-kilometer trip, GPS is lost several times, and somewhere near the final destination of the trip, the phone suddenly starts to show the right way this is already becoming a tradition.....

I my location on this ROM i have a problem with conersation. Before i used AOSP 5.7 based on Oreo and in my room i could talk by phone. Acctually i must go to kitchen because only there i can normally talk.
It's look like worse signal or not all bands compatible. My Axon have B20 (it isn't china version). Sometimes i have problem with internet - connecting by LTE isn't possible. When i was in London i couldn't use internet. Phone found transmitter, about 3/5 signal strange but any page or facebook lite no load.

NEW ARROW BUILD 2020.01.26
Arrow-v9.0-axon7-UNOFFICIAL-2020.01.26
changelog :
* Merge branch 'android-9.0.0_r52'
* jan 2020 sec. patches

Thank you for not abandoning our dear Axon 7. Please continue to develop ROMs for him!

Thank you very much for the rom, my Axon 7 is now back to life.

Dark mode isn't forced in other apps, like google photos.

larsky said:
BUILD 2019.11.17 First Impressions
Pretty happy with this ROM coming from the most recent (now deprecated) Lineage 15.1 Official Nightly and really loving Arrow.
The only thing I'm missing is the ability to slide finger on status bar to adjust brightness.
I noticed the battery life seems noticeably better. I was hours away from replacing my Axon due to the battery just being horrible, even after being recently replaced. Everything seems buttery smooth besides the Gcam app I'm using. It works, but very sluggish.
Please do recommend your favorite camera app for this ROM.
I'm passing SafetyNet after installing Pixel Android 9 Props.
GPS took over a minute to get a lock the first time around, but now works within 15 seconds as expected.
USB tethering has been temperamental. I disabled hardware acceleration via Developer Settings and it seems to be working better.
I can confirm that swipe texting on AOSP keyboard does not work, however works fine with Gboard.
Hardware keys work as expected however even with the home button Long Press Action set to activate Google Assistant it does nothing. It seems that the Google Assistant action does not work with any of the button settings including the on screen navbar.
I haven't been able to get USB-OTG to work on any ROMs since ditching stock. Maybe someone knows a fix. It doesn't work in TWRP either, so maybe it's my hardware.
Besides a few minor quirks, I am hugely grateful for this ROM providing Pie and rekindling my love for this aging Axon. Thank you!
Click to expand...
Click to collapse
##############################
1- To enable assistant you have to choose the google app for the default assistant in the default apps settings.
2- I have trsted nearly 80% of all gcam apks, and the best one so far and the newest is Urnyx05 latets version, you can find it here
https://1-dontsharethislink.celsoazevedo.com/file/filesc/GCam_7.3.018_Urnyx05-v2.2-fix.apk
3- Aosp keyboard is a just terrible, just get Gboard.
4- Clean flashing the rom will solve GPS and USB problems, always clean flash.

[OFFICIAL] [NIGHTLIES] LineageOS 17.1

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Moto Z2 Force
Code:
- Your warrenty is now void.
- You have been warned.
- Use at your own risk.
Introduction:
This is the Official Lineage OS 17.1 thread for the Motorola Moto Z2 Force, codename nash.
Join our Moto Z2 Force Development Discord server!
How to Install:
Please follow the instructions on our Official LineageOS Wiki page here.
If you don't follow these instructions, please don't expect support here. We also don't support 3rd party addons (Magisk/XPosed/Dolby/Viper/etc.), so please don't seek support if you use these.
Known Bugs:
Camera Mods don't work.
Official Lineage OS builds will not ever allow Moto's Battery Mod "Efficiency Mode" to work.
The EQ Apps for Audio Mods (eg. JBL2 App) won't work, and will crash.
Ultrasonic Proximity Sensor doesn't work -- No support present in the OSS Audio HAL. If it was written in, it wouldn't be used by anything in Lineage, as the normal proximity sensor works fine.
Notes:
Official Lineage OS builds for nash ship with full Project Treble compatibility! Flash GSI's to your heart's content after flashing Lineage. Please don't report GSI bugs here, report them instead to the GSI's maker.
Technical details on our Treble implementation:
Treble is enabled with VNDK29, and VNDK runtime enforcement. VNDK runtime enforcement means that unlike most "ported treble" you'll see, ours is just as it would be from the OEM, and can run GSIs. without need for hacks or additional flashable zips. We relabeled /oem to /vendor (as /oem isn't wasn't used in custom ROMs anyway). To use a GSI, flash official Lineage, then flash your GSI, it's that simple! Flashing a factory image will likely write over /oem and remove the mock vendor image.
Download:
LineageOS Updater
npjohnson's Personal Updater -- These are experimental, likely to break/eat your cat/destroy your data, and include GApps -- you'll only find support for these in the Discord linked above.
XDA:DevDB Information
[OFFICIAL] [NIGHTLIES] LineageOS 17.1, ROM for the Moto Z2 Force
Contributors
npjohnson, erfanoabdi, invisiblek
Source Code: https://github.com/LineageOS
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: Newest firmware available for your variant
Based On: LineageOS
Version Information
Status: Stable
Created 2020-04-01
Last Updated 2020-04-15

Removed

Hey, I cant find the link of lineaeg 17.1? (Build 0401, yesterday i found!) Just a joke?

How can I unlock bootloader, install TWRP and LineageOS on my XT1789-04 (AT&T)?

It is a beautiful day!
Although there's no download links.

A Sad Story said:
Hey, I cant find the link of lineaeg 17.1? (Build 0401, yesterday i found!) Just a joke?
Click to expand...
Click to collapse
I downloaded and installed and everything is ok xD

bogante said:
I downloaded and installed and everything is ok xD
Click to expand...
Click to collapse
I cant find link. In download.lineageos no build of 17. Can u share it?

A Sad Story said:
I cant find link. In download.lineageos no build of 17. Can u share it?
Click to expand...
Click to collapse
Oh man, my upload speed is 50kb/s it will take forever

Hi devs!
Trying it out, seems pretty great! Very few bugs (not related to device probably, just LOS17).
Only device bug I've found is the camera focus: it doesn't seem to be focusing properly (or at all).
If you need any logs let me know - eager to help out.
EDIT: That's weird. Somehow after using the camera app and moving the thing around I got it to work again. Although it's sporadic at best - focusing isn't working reliably.
EDIT 2: Found what allows it to work sometimes: open and close the camera app briefly time and time again and it starts working.

Has anyone with Reliance Jio tried it? I'm not able to get VoLTE going. Phone info (*#*#4636#*#*) has VoLTE provisioned enabled but greyed out. IMS Service status says not registered for IMS registration, and Not Available for everything else.
I jumped to 17.1 straight from stock, so not sure if it used to work in 16.0. I manually tried adding the ims apn for Jio, but no go...

Jelixis said:
Hi devs!
Trying it out, seems pretty great! Very few bugs (not related to device probably, just LOS17).
Only device bug I've found is the camera focus: it doesn't seem to be focusing properly (or at all).
If you need any logs let me know - eager to help out.
EDIT: That's weird. Somehow after using the camera app and moving the thing around I got it to work again. Although it's sporadic at best - focusing isn't working reliably.
EDIT 2: Found what allows it to work sometimes: open and close the camera app briefly time and time again and it starts working.
Click to expand...
Click to collapse
I'm facing same issue
---------- Post added at 10:08 AM ---------- Previous post was at 10:07 AM ----------
ph03n!x said:
Has anyone with Reliance Jio tried it? I'm not able to get VoLTE going. Phone info (*#*#4636#*#*) has VoLTE provisioned enabled but greyed out. IMS Service status says not registered for IMS registration, and Not Available for everything else.
I jumped to 17.1 straight from stock, so not sure if it used to work in 16.0. I manually tried adding the ims apn for Jio, but no go...
Click to expand...
Click to collapse
Again facing the same issue here
Calls don't work with jio and I'm also facing camera focus issues

ph03n!x said:
Has anyone with Reliance Jio tried it? I'm not able to get VoLTE going. Phone info (*#*#4636#*#*) has VoLTE provisioned enabled but greyed out. IMS Service status says not registered for IMS registration, and Not Available for everything else.
Click to expand...
Click to collapse
Adding to my quote here, I got incoming calls coming in! Only outgoing is not, the rest of the stuff I've reported remains the same. Also, the phone is able to query the status of Call Waiting and Call Forwarding, so IMS is partially working. This is a pure LTE provider, does not have a fallback.
Shreeram02 said:
Again facing the same issue here
Calls don't work with jio and I'm also facing camera focus issues
Click to expand...
Click to collapse
I haven't tried the camera. But did you upgrade from LOS16, and did Jio work fine there?

ph03n!x said:
Adding to my quote here, I got incoming calls coming in! Only outgoing is not, the rest of the stuff I've reported remains the same. Also, the phone is able to query the status of Call Waiting and Call Forwarding, so IMS is partially working. This is a pure LTE provider, does not have a fallback.
I haven't tried the camera. But did you upgrade from LOS16, and did Jio work fine there?
Click to expand...
Click to collapse
Yea incoming calls are fine btw normal messages don't work either
Yes in los 16 everything is fine
in los 17(not 17.1)(the September 21 unofficial build) calling is working fine camera has same bugs there too tho
But if u want everything working los16 is the option

@erfanoabdi @ThE_MarD @npjohnson not sure if you had a chance to review this - while this installs in LOS17.1, does not really control efficiency mode.
However we can still see the battery % of the Incipio Mod:
https://forum.xda-developers.com/z2-play/themes/motomodbattery-service-lineageos-15-1-t3895041/
https://github.com/devilsclaw/MotoModBattery
I was looking for a way to find the mod's battery % and stumbled on this...

no signal
i dunno what im doing wrong but when i flash LoS 17.1 and reboot the rom start but i have no signal

bogante said:
i dunno what im doing wrong but when i flash LoS 17.1 and reboot the rom start but i have no signal
Click to expand...
Click to collapse
Do you see your phone's IMEI in settings > about phone? Baseband version when you tap the Android version (10) in the same screen?

Magisk manager
I update LOS 16 to this 17.1 and everything seems to work fine, no real bugs. I've installed latest 7.2 google camera port from Arnova and picture/video/selfies are great. Phone calls no problems and it's a my impression but finally loudspeaker volume is higher than previous lineage versions. Only a question, maybe someone can help me, I've lost magisk root access, is it possible to install it with a temporaney twrp as in LOS 16 or is there any other method please?
[SOLVED] Maybe could be useful for someone. I tried the pie method: I've installed Magisk zip booting (not flashing) TWRP 3.3.1-0 (the 3.3.1-1 doen't boot on my device). Everything is working fine, I don't have any glitch and now my devices is rooted too

Getting Glitches when Playing Games Like Asphalt 9 also Same Camera Focusing Problem here too.

I'm seeing glitches in the home screen/ launcher too. Happens at random, gets psychedelic when unlocking - there are wavy lines (stock LOS17.1 wallpaper) on the image that move. Screenshot does not capture this, but I can take a photo if it helps figure the problem.
Messing with Developer Options (disabling overlay, etc) has not effect. Let me know if I can help troubleshoot...

Heyyo @ph03n!x, my nash is broken btw so I can't help too much.
Anywho, for the graphical glitches? Please try to go into your LiveDisplay settings and disable any special profile you have selected. I think those profiles are actually broken on nash hence the graphical issues when waking up the device after it sleeps.
Can you do me a favor please? Test my latest build of TWRP for nash. version 3.3.1-1 that contains a bunch of fixes and so far no feedback...
https://forum.xda-developers.com/showpost.php?p=82170641&postcount=590