Anyone tried to install OpenKirin?
I'm assuming the images for M5s will not work here.
@OldDroid
@XePeleato
@surdu_petru
@Bloodlvst
@irony_delerium
Is there a change for the M5 Lite?
I would buy it, if you say that there will be a possibility in the future...
You support already devices with the Kirin 659.
What would happen if i try to install the rom on the device?
(Sry i don't use telegramm (XMPP/matrix...) )
Is the Sourcecode for the M5 Lite available?
jokergermany said:
@OldDroid
@XePeleato
@surdu_petru
@Bloodlvst
@irony_delerium
Is there a change for the M5 Lite?
I would buy it, if you say that there will be a possibility in the future...
You support already devices with the Kirin 659.
What would happen if i try to install the rom on the device?
(Sry i don't use telegramm (XMPP/matrix...) )
Is the Sourcecode for the M5 Lite available?
Click to expand...
Click to collapse
It should work (looking it up says it's running EMUI 8) with the caveat that they're all phone-type builds - though that mostly ends up meaning they've got the phone app and such things included which are probably not useful on a tablet.
irony_delerium said:
It should work (looking it up says it's running EMUI 8) with the caveat that they're all phone-type builds - though that mostly ends up meaning they've got the phone app and such things included which are probably not useful on a tablet.
Click to expand...
Click to collapse
Thanks for the reply.
Too many Features are better then less Features, isn't it?^^^
Is there a possibillity to test OpenKirin and if it doesn't work set the tablet back to factory reset before sending it back to the merchant?
jokergermany said:
Thanks for the reply.
Too many Features are better then less Features, isn't it?^^^
Is there a possibillity to test OpenKirin and if it doesn't work set the tablet back to factory reset before sending it back to the merchant?
Click to expand...
Click to collapse
Make sure you've got a copy of the stock firmware beforehand; all of our ROMs are just the system partition, so if they don't work (or you don't like them), you can flash back the EMUI system partition from the stock firmware and be back on stock. Of course, you've got to unlock the bootloader to install them - and depending on where you're at, that may be reason to not accept the device as a return.
irony_delerium said:
Make sure you've got a copy of the stock firmware beforehand
Click to expand...
Click to collapse
How can i copy it? I Thought you need at least twrp, which would delete the stock recovery?
jokergermany said:
How can i copy it? I Thought you need at least twrp, which would delete the stock recovery?
Click to expand...
Click to collapse
Firmware finder website.
Instructions for all of it are on the OpenKirin website at https://www.openkirin.net/.
Also, stock recovery is actually preferred - TWRP has it's share of issues on Kirin devices, and we don't support the use of it with an OpenKirin ROM. So you'd want the stock images for that as well, for retrieving the stock recovery.
@irony_delerium I tried flashing OmniROM Pie Alpha 6.2 (for EMUI8) with the instructions posted @ https://openkirin.net/user_guide/how-to-flash-extracted-partition-images/
After flashing and formatting I am stuck on "Your device is booting now", but nothing happens even after +-10 mins
I also tried the last RR but same problem. Then tried flashing an older stock rom version (177) to see if I could get more success from there, but that also wouldn't boot.
Flashed back to my original stock rom version now (277), which works fine after formatting data.
I'm using a Mediapad M5 Lite BAH2-W19 8.0.0.227 (OCEC432)
Any idea what I could be doing wrong?
Since B218 there is no possibility to downgrade via DLOAD anymore. So the current situation is: No more custom ROMs for M5 lite.
tommes_d said:
Since B218 there is no possibility to downgrade via DLOAD anymore. So the current situation is: No more custom ROMs for M5 lite.
Click to expand...
Click to collapse
I know I am a tad late, but you are wrong. just in case anyone is looking on this thread anyway
federiconafria said:
Anyone tried to install OpenKirin?
I'm assuming the images for M5s will not work here.
Click to expand...
Click to collapse
I've installed it and using it since October and I can tell it's working very good. The only bug is the offline charge that doesn't work. You need to charge the tablet when is on. I recommend you to install it.
Related
This thread was made to keep the development thread of Cyanogenmod 13 clean.
If you have any question related to this rom,feel free to ask here!
EDIT
Due to certain circumstances and requests by several people to share my link of the CM build I produced,here is the link to the folder:
DOWNLOAD
NOTE
The source code is by Meticulus.
This is also for those who installed the CM build on the Honor 5C,please do give feedback so a Working/Not Working list can be assembled.
Used cyanogenmod 13 for a while on this phone but decided to revert back to stock because of the camera. now when i try to install it and do a factory reset from twrp i cant!
on twrp boot it gives me an error that it cant mount /data (no such file or destination) thus not wiping it, thus not being able to install cm13. any help?
EDIT: seems that twrp doesnt detect internal storage at all. shows 0mb available , but i can browse it on the stock file manager just fine. ideas?
slumpijs said:
Used cyanogenmod 13 for a while on this phone but decided to revert back to stock because of the camera. now when i try to install it and do a factory reset from twrp i cant!
on twrp boot it gives me an error that it cant mount /data (no such file or destination) thus not wiping it, thus not being able to install cm13. any help?
EDIT: seems that twrp doesnt detect internal storage at all. shows 0mb available , but i can browse it on the stock file manager just fine. ideas?
Click to expand...
Click to collapse
try to flash custom rom based on stock
and then flash stock recovery and then do a factory reset from stock recovery
try it and tell me what happened
sorry for my poor English
hey can I flash the new update without formatting the system?
Double touch to unlock and swipe to lock are working?
Claleale said:
Double touch to unlock and swipe to lock are working?
Click to expand...
Click to collapse
I don't think so,but you can unlock the phone instantly with your fingerprint,so I personally see no reason to use DT2W on this device.
I have a question,
if only LTE is availeble, what happen when you are in a place where the reception isn't good? Does the network stop working?
Potato997 said:
I have a question,
if only LTE is availeble, what happen when you are in a place where the reception isn't good? Does the network stop working?
Click to expand...
Click to collapse
When i have no LTE coverage, i have 3G network, so no
Everytime i want to pair my LG G Watch bluetooth turns off... And new on again...
Somebody the same Problem?
StefanSpiegel said:
Everytime i want to pair my LG G Watch bluetooth turns off... And new on again...
Somebody the same Problem?
Click to expand...
Click to collapse
I had this problem with my bluetooth headset, but after trying and trying it worked
enzo24754 said:
I had this problem with my bluetooth headset, but after trying and trying it worked
Click to expand...
Click to collapse
did you try something spezial?
StefanSpiegel said:
did you try something spezial?
Click to expand...
Click to collapse
Nope, just trying
How difficult will it be to get a CM 14 build up and running once we have a working CM 13 build (using CM13 as template)?
Just wondering because first CM 14 builds are out for other devices.
Schlengge said:
How difficult will it be to get a CM 14 build up and running once we have a working CM 13 build (using CM13 as template)?
Just wondering because first CM 14 builds are out for other devices.
Click to expand...
Click to collapse
CM13 can't be used as a template.
Other devices got CM14 because:
a)their stock rom stopped at MM,but their developers made the blobs open source,so they can easily go to CM14
b)they already have stock N,so they simply use the blobs from it.
Our device doesn't meet none of the provided scenarios,we will probably get stock N on December,and only then will we be able to start working on it.
Sent from my P9-Lite using Tapatalk
HassanMirza01 said:
@Meticulus if possible, upgrade the camera to 13mp first,,, we all are just waiting for original camera to install CM13 ❤ love your work in quick time :thumbsup
Click to expand...
Click to collapse
But... 13MP camera works on Google Camera...
enzo24754 said:
But... 13MP camera works on Google Camera...
Click to expand...
Click to collapse
Yah,but that pearl even had the audacity to order a developer what to work on,I doubt logic would work on him. :silly:
Sent from my P9-Lite using Tapatalk
I don't understand why people don't respect developers will.. They can work on whatever they want, if you have these kind of request just build your own ROM.
Potato997 said:
I don't understand why people don't respect developers will.. They can work on whatever they want, if you have these kind of request just build your own ROM.
Click to expand...
Click to collapse
Suggestions are okay, but not orders
Did the CM13 development stop?
I don't hope so..
Hi Folks
I just start developments of Google AOSP rom based on 7.1.2 R6 for our P8 Lite 2017 PRA-LX1, this topic will show you only the developments progress of that rom, will be released once fix most of bugs.
This is only an info topic, do not spam it because will be closed at ended works.
the release builds topic will be on android developments section.
AOSP Recovery: fixed & booting.
AOSP System.
Audio.
Bluetooth.
Camera.
Display.
Fingerprints.
GPS.
Graphics: gralloc & hwcomposer.
Internal & External Storage.
Multimedia.
NFC.
RIL.
Sensors.
Wifi
Note:
Each time when I fix something, will be strike..keep in touch
Great job! First rom is finnaly coming to PRA-LX1!
P.S.: Also, you P8Lite 2015 has finished repairing?
Thank You.
I Was Waiting For This.
Because If You Remember My Device Won't Boot Cause I Wiped The System Partition By Mistake.
XTutorials said:
Great job! First rom is finnaly coming to PRA-LX1!
P.S.: Also, you P8Lite 2015 has finished repairing?
Click to expand...
Click to collapse
Yup
I just send the phone yesterday, no holidays on this period in italy, guess should be repaired quickly.
Finally an AOSP ROM!
Is this still using the stock kernel?
YSFYoussef480 said:
Thank You.
I Was Waiting For This.
Because If You Remember My Device Won't Boot Cause I Wiped The System Partition By Mistake.
Click to expand...
Click to collapse
Can't you use the Huawei update extractor to extract UPDATE.APP and flash that? Or get someone to make a system backup in TWRP and send it to you?
Vinnipinni said:
Can't you use the Huawei update extractor to extract UPDATE.APP and flash that? Or get someone to make a system backup in TWRP and send it to you?
Click to expand...
Click to collapse
Tried Everything !!!
YSFYoussef480 said:
Tried Everything !!!
Click to expand...
Click to collapse
I don't have the 2017 version, but what does it say? Can't you flash the system via fastboot? Or use stock recovery and force update to update it? Just remember that you need a FULL package. On most Huawei phones you can just flash a FULL package I'm TWRP. Just OTA doesn't work because it doesn't include a full system.img most of the times.
Vinnipinni said:
I don't have the 2017 version, but what does it say? Can't you flash the system via fastboot? Or use stock recovery and force update to update it? Just remember that you need a FULL package. On most Huawei phones you can just flash a FULL package I'm TWRP. Just OTA doesn't work because it doesn't include a full system.img most of the times.
Click to expand...
Click to collapse
No, I Can't
boofman said:
Finally an AOSP ROM!
Is this still using the stock kernel?
Click to expand...
Click to collapse
Yes still use stock kernel.
haky 86 said:
Yes still use stock kernel.
Click to expand...
Click to collapse
Is There Any ETAs,Please ?!
YSFYoussef480 said:
Is There Any ETAs,Please ?!
Click to expand...
Click to collapse
no, once get booted I"ll post screenshots and modding this phone will be very hard because no kernel source for our pra-lx1 yet.
yeah sounds great! will this rom be prerooted?
and will there be more free space in local storage? =)
xpatze85x said:
yeah sounds great! will this rom be prerooted?
and will there be more free space in local storage? =)
Click to expand...
Click to collapse
Once you have root, even with the Stock ROM, you can already start uninstalling System Apps to debloat.
---------- Post added at 05:43 AM ---------- Previous post was at 05:41 AM ----------
haky 86 said:
Yes still use stock kernel.
Click to expand...
Click to collapse
This is my first Huwei device, do they usually release Sources for Devs?
boofman said:
This is my first Huwei device, do they usually release Sources for Devs?
Click to expand...
Click to collapse
They released the source code for p8, and some other device but late. Kirin isn't dev friendly AFAIK
Reserved
-no signs of booting about aosp 7.1.2.
-anyone would like to try it here my repos:
https://github.com/hak86/android_device_huawei_prague
https://github.com/hak86/android_vendor_huawei_prague
I send a message via email to huawei about sending cd that contain source code of this phone, but I've some doubt that will respond..who's know..
haky 86 said:
-no signs of booting about aosp 7.1.2.
-anyone would like to try it here my repos:
https://github.com/hak86/android_device_huawei_prague
https://github.com/hak86/android_vendor_huawei_prague
I send a message via email to huawei about sending cd that contain source code of this phone, but I've some doubt that will respond..who's know..
Click to expand...
Click to collapse
So Is There Any Hopes For This Rom !!
Cause I'm So Excited For This !!
I Need It Cause My Device Won't Boot Cause I Wiped The System Partition By Mistake !
I Can't Do Anything With It Except Staring At It !
Soo Will This Rom Release Soon ???
YSFYoussef480 said:
So Is There Any Hopes For This Rom !!
Cause I'm So Excited For This !!
I Need It Cause My Device Won't Boot Cause I Wiped The System Partition By Mistake !
I Can't Do Anything With It Except Staring At It !
Soo Will This Rom Release Soon ???
Click to expand...
Click to collapse
Have you tried restoring the stock ROM using ADB? It worked for me..
boofman said:
Have you tried restoring the stock ROM using ADB? It worked for me..
Click to expand...
Click to collapse
How ?!
YSFYoussef480 said:
How ?!
Click to expand...
Click to collapse
Sorry, I meant installing, not restoring. It's just bascally downloading the ROM, extracting the contents using Huawei update extractor, and using ADB to push the files in. You will need to reinstall TWRP and Root afterwards..Google is your friend, there are instructions out there, as there are 3 ways to install the stock ROM: using the updater on your phone, using the key combo, and the 3rd one being ADB.
Hi guys,
So I managed to get my hands on a GT5 mini and I'm wondering whats the best ROM for it if there is any that is? I was searching but didn't find any even though I did see that Linenage 14.1 is compatible. But I'm unsure if its the best choice if there exist any other thats compatible or is it my only choice
Model: NMO-L23
Bootloader has already been unlocked and TWRP v3.0.2.0 has been flashed on it as well
storm313 said:
Hi guys,
So I managed to get my hands on a GT5 mini and I'm wondering whats the best ROM for it if there is any that is? I was searching but didn't find any even though I did see that Linenage 14.1 is compatible. But I'm unsure if its the best choice if there exist any other thats compatible or is it my only choice
Model: NMO-L23
Bootloader has already been unlocked and TWRP v3.0.2.0 has been flashed on it as well
Click to expand...
Click to collapse
Head over HERE. The dev needs testers.
I have the GT3 and it's the same model as your GT5
I think that up to now these models are the same as the GR5 mini, and the GT3 model: NMO-L23. Are the same for what I begin to understand and I still can not make it root.
And I'm on the same looking roms compatible with them.
I have tried, such as:
1. CM 13
2. CM 14 (LineageOS)
3. Asernik N
4. eLite N
5. B191/ B356/ B361 KangV
You can try and find what is the most suitable ROM for you.
stevedat said:
I have tried, such as:
1. CM 13
2. CM 14 (LineageOS)
3. Asernik N
4. eLite N
5. B191/ B356/ B361 KangV
You can try and find what is the most suitable ROM for you.
Click to expand...
Click to collapse
What's the most stable?
Sent from my Honor 8 using XDA Labs
adriansticoid said:
What's the most stable?
Sent from my Honor 8 using XDA Labs
Click to expand...
Click to collapse
Can't really tell.
But if you like something to play around I recommend eLite & Asernik
If wanting original modified one, it is latest B358 KangV from HRT
Stability is stock one sorry I have to say so!
stevedat said:
Can't really tell.
But if you like something to play around I recommend eLite & Asernik
If wanting original modified one, it is latest B358 KangV from HRT
Stability is stock one sorry I have to say so!
Click to expand...
Click to collapse
Yes of course. And that's alright. Stock being the most stable is given.
Sent from my Honor 8 using XDA Labs
Arsenik is much better n stable.
this depends, if its for daily use: stock rom with root.
thelous said:
this depends, if its for daily use: stock rom with root.
Click to expand...
Click to collapse
using Arsenik from P9 lite thread and working absolutely fine. yet to check for battery stats but seems pretty stable and better RAM management than stock.
shashank1320 said:
using Arsenik from P9 lite thread and working absolutely fine. yet to check for battery stats but seems pretty stable and better RAM management than stock.
Click to expand...
Click to collapse
that just means that it closes apps more agressively and opening them eats more battery.
thelous said:
that just means that it closes apps more agressively and opening them eats more battery.
Click to expand...
Click to collapse
not really. around 500 MB free memory on 5C with 20 apps open. I can switch between them easily and felt no lags. battery is 5+ hours SOT. More than 60 apps installed (apart from preinstalled one)
shashank1320 said:
not really. around 500 MB free memory on 5C with 20 apps open. I can switch between them easily and felt no lags. battery is 5+ hours SOT. More than 60 apps installed (apart from preinstalled one)
Click to expand...
Click to collapse
my battery is 8h+ SOT youtube and web browsing. normal offline video SOT is close to 16 hours. stock emui no root. 150+ apps (games, vpn clients, other useful apps).
thelous said:
my battery is 8h+ SOT youtube and web browsing. normal offline video SOT is close to 16 hours. stock emui no root. 150+ apps (games, vpn clients, other useful apps).
Click to expand...
Click to collapse
on HOnor 5C?
dont think that is possible. thats only 3000 mAh.
shashank1320 said:
on HOnor 5C?
dont think that is possible. thats only 3000 mAh.
Click to expand...
Click to collapse
nem-L21, powersving on, screen brightness at 25%ish. easily done. my old 7" tablet has worse battert even its battery is 4200 mAh.
Bricked GR5 mini
I tried to flash the Linenage 14.1 on my HUAWEI GR5 mini(NMO-L31). It didn't work. I tried to boot the device but it failed. When I tried to flash stock rom on it, accidently it bricked and not booting up. In TWRP recovery mod, a message is shown all the time saying, "NO OS INSTALLED." I send the device to the support center, but they refused to fix it. Now, what can I do to retrive my device?
sajidanamifti said:
I tried to flash the Linenage 14.1 on my HUAWEI GR5 mini(NMO-L31). It didn't work. I tried to boot the device but it failed. When I tried to flash stock rom on it, accidently it bricked and not booting up. In TWRP recovery mod, a message is shown all the time saying, "NO OS INSTALLED." I send the device to the support center, but they refused to fix it. Now, what can I do to retrive my device?
Click to expand...
Click to collapse
First, sorry about my english, let me ask you one question? Did you backup entire rom before?
If yes, follow my instruction to return stock ROM: + Restore all of stuff that you backup before.
-STEP 1: download HUAWEI GR5 Mini Firmware, extract, get the Software folder and UPDATE.app file.
Http://download-c1.huawei.com/downlo...98&siteCode=np
- STEP 2: create dload directory in the memory card, copy UPDATE.app file to the above
-Step 3: up rom copied in dload by hard key, after the machine up, will lower to C900B300
(Press 3 Volume up + Volume down + Power at the same time, you have to unplug USB cable, if not working then try to plug USB cable... )
-STEP 4: Download the rom 6.0 you need, and copy it into dload folder (like step 1), after that, go step 3.
https://forum.xda-developers.com/hon...model-t3455519
(source: https://forum.xda-developers.com/honor-5c/how-to/roll-to-android-6-android-7-huawei-gr5-t3582525) thanks to tamnguyenuit!
After that, you will stay at android 6.0 Stock ROM and bootloader locked! Just need some time to upgrade to 7.0 via OTA. Goodluck, anything i could help, just ask ^^
I didn't backup the whole system with TWRP
I didn't backup the whole system of HUAWEI GR5 mini. Now, what will I have to do to restore my device from bricked stage?
sajidanamifti said:
I didn't backup the whole system of HUAWEI GR5 mini. Now, what will I have to do to restore my device from bricked stage?
Click to expand...
Click to collapse
Nothing. Just try to dload the same firmware you had before messing up the things. It will restore all
Can give me details and I will share the firmware links with you
Info. about device
Bricked Device Information-
Device: HUAWEI GR5 mini
Model: HUAWEI NMO-L31
S/N: EUC4C16A14000319
Region: South-East Asia
Country: Bangladesh
Before Loosing Sysytem-
EMUI 5.0
Patch Level 1st april, 2017
[The phone was rooted]
I don't know any further information.
Thanks for giving me your important time.
Code:
Warning! any damage done to your device is not my fault, use at your own risk!
Hi everyone, after seeing a lack of TWRP flash-able roms I decided to upload this, it is the latest stock rom of the Xiaomi A1, pre-rooted (although I attached stock kernel if you rather go root free)
Instructions:
First of all have at least 30% power on your device to avoid any power down during flash and possible bricking
1. In TWRP select zip and flash, please note that this will flash both A/B partitions (but not userdata partition)
2. After done, reboot
What's the use of this ZIP? if your like me and not always next to your PC to flash fastboot roms or if you want to return to stock or downgrade etc, you can do it using this.
Download: Link
XDA:DevDB Information
[ROM][STOCK][TWRP][v9.5.10]Tissot Stock Oreo 8.0 Rooted/8.1 Leak, ROM for the Xiaomi Mi A1
Contributors
sooti
ROM OS Version: 8.x Oreo
Version Information
Status: Stable
Current Stable Version: April
Created 2018-01-16
Last Updated 2018-04-29
Changelog:
03/02/18:
* Febuary Beta patch
16/01/18:
* Janurary security patch rooted with magisk 15.3 and twrp 3.2.1-1
Hey, thanks so much for this.
What's the recovery you suggest to use for this? The latest ones that I know of can't mount internal storage and data.
Any thoughts?
varben said:
Hey, thanks so much for this.
What's the recovery you suggest to use for this? The latest ones that I know of can't mount internal storage and data.
Any thoughts?
Click to expand...
Click to collapse
This works great
Use this to boot TWRP (fastboot boot [twrp_Image.img]):
https://androidfilehost.com/?fid=962157660013069602
then flash this from external SD
http://www.mediafire.com/file/338o7cl72z52rzz/twrp-3.2.1-1-installer-tissot-FIXED_By_DroiDMester.zip
After that internal/external will mount fine, the key is having it flashed, otherwise they don't mount if booted
Do we need to do a clean install or we can make a dirty install?
vraciu' said:
Do we need to do a clean install or we can make a dirty install?
Click to expand...
Click to collapse
Both will work fine, userdata partition is not touched
This is amazing! Thanks for the work
What's boot_stock_twrp? Has TWRP but not rooted?
NicoNewbie said:
What's boot_stock_twrp? Has TWRP but not rooted?
Click to expand...
Click to collapse
Exactly
@sooti many thanks mate, this sounds really good. must try it. could you make one day (when you have looooot of free time) a deodexed version of this. I have tried that many times, but never got a working one.. my intention was to make an deodexed and google free version. but I suppose, I am to unexperienced.
thx!
ydd0ras said:
@sooti many thanks mate, this sounds really good. must try it. could you make one day (when you have looooot of free time) a deodexed version of this. I have tried that many times, but never got a working one.. my intention was to make an deodexed and google free version. but I suppose, I am to unexperienced.
thx!
Click to expand...
Click to collapse
Nah, i don't see the benefit of deodex plus the time it will take is just not worth it... i just wanted to share the stock solution since i got sick of flashing through fastboot/miflash or restoring using twrp... this is much faster and better
sooti said:
Nah, i don't see the benefit of deodex plus the time it will take is just not worth it... i just wanted to share the stock solution since i got sick of flashing through fastboot/miflash or restoring using twrp... this is much faster and better
Click to expand...
Click to collapse
OK, no problem. Then I must work furthermore with Xposed Framework and FakeGapps and more.
But you're fully right: this flashing procedures via fastboot are annoying and making tired.
Cheers!
Thank you Sooti for this.
Exellent work.
gr wesley
ydd0ras said:
@sooti many thanks mate, this sounds really good. must try it. could you make one day (when you have looooot of free time) a deodexed version of this. I have tried that many times, but never got a working one.. my intention was to make an deodexed and google free version. but I suppose, I am to unexperienced.
thx!
Click to expand...
Click to collapse
If u planning to do some editing then not needed. Because the 8.0 Oreo in A1 is already deodexed for editing purpose. U don't need to deodex it for EDITING PURPOSE.
Rajeev said:
If u planning to do some editing then not needed. Because the 8.0 Oreo in A1 is already deodexed for editing purpose. U don't need to deodex it for EDITING PURPOSE.
Click to expand...
Click to collapse
Really? The N builds were odexed. Then I must be able to flash the NanoMod and the NanoMod Patcher if it's deodexed.
Thx, mate nice tip
Sent from my Mi A1 using XDA-Developers Legacy app
Hi,
Can I flash with FlashFire?
We7dy said:
Hi,
Can I flash with FlashFire?
Click to expand...
Click to collapse
No idea... I would use twrp if I were you but if you do try it , do it at your own risk
@sooti I can find security patch level os of 1 January 2018. You have mentioned 10 January 2018 ?
Sent from my [device_name] using XDA-Developers Legacy app
Thanks @@sooti for this ROM. I flashed it with TWRP and so far everything works great.
I have a question. After flash I directly flash stock boot.img, after boot to system and let everything settle down I boot back to recovery and it is now the stock recovery. Does this mean if there's OTA in future I can apply it?
ydd0ras said:
OK, no problem. Then I must work furthermore with Xposed Framework and FakeGapps and more.
But you're fully right: this flashing procedures via fastboot are annoying and making tired.
Cheers!
Click to expand...
Click to collapse
I'm new with Mi 1, can you tell me why flash with fastboot? Is it using command prompt to flash with fastboot?
sooti said:
Changelog:
16/01/18:
* Janurary 10/01/18 security patch rooted with magisk 15.3 and twrp 3.2.1-1
Click to expand...
Click to collapse
How to rooted on january security patch?
Do you have patched_boot.img january patch?
For root and install magisk. Thanks before
*Sorry for my bad english
Samsung replied to my OSS request today with word that they'd shared kernel source for the 2019 Galaxy Tab A 10.1 [SM-T510/T515].
http://opensource.samsung.com
The version posted is T510XXU1ASC7, which matches the latest OEM firmware available online:
https://samfrew.com/model/SM-T510/
https://samfrew.com/model/SM-T515/
This will unblock my TWRP development and should also enable efforts to build most custom ROMs for the new hardware.
Great stuff! Just bought a T510, hope to receive the tablet today.
beta990 said:
Great stuff! Just bought a T510, hope to receive the tablet today.
Click to expand...
Click to collapse
You will not regret it
I am so happy with it after I managed to root it.
Other than using "key combo" to turn it on, everything works as it's supposed to including Titanium Backup.
There's some headache on T590 and the users cannot use Titanium Backup even it's rooted
mingkee said:
You will not regret it
I am so happy with it after I managed to root it.
Other than using "key combo" to turn it on, everything works as it's supposed to including Titanium Backup.
There's some headache on T590 and the users cannot use Titanium Backup even it's rooted
Click to expand...
Click to collapse
HI, I just got T515 to use on a project. I am very new to android and I would like to root it for the project. So far I follow "getdroidtips" but it almost break my tablet. Any suggestion on rooting?
sanhapie said:
HI, I just got T515 to use on a project. I am very new to android and I would like to root it for the project. So far I follow "getdroidtips" but it almost break my tablet. Any suggestion on rooting?
Click to expand...
Click to collapse
+1 Any one manage to root?
Pinage said:
+1 Any one manage to root?
Click to expand...
Click to collapse
I built NoKnox and TWRP for the SM-T515 after they posted the kernel source, but my volunteer tester couldn't get them to work. Maybe you'll have better luck?
(Unfortunately, I don't have the hardware to test myself. They're not selling them in the U.S.)
Magendanz said:
I built NoKnox and TWRP for the SM-T515 after they posted the kernel source, but my volunteer tester couldn't get them to work. Maybe you'll have better luck?
(Unfortunately, I don't have the hardware to test myself. They're not selling them in the U.S.)
Click to expand...
Click to collapse
Where is the xda url? Let me read up and see if I can help.
Pinage said:
Where is the xda url? Let me read up and see if I can help.
Click to expand...
Click to collapse
The TWRP development thread for Galaxy Tab A 10.1 (2019) is here, but the builds for SM-T515 weren't posted because they never made it through testing.
Magendanz said:
The TWRP development thread for Galaxy Tab A 10.1 (2019) is here, but the builds for SM-T515 weren't posted because they never made it through testing.
Click to expand...
Click to collapse
What happen during testing. Anyway to help? Really wish root is available.
Pinage said:
What happen during testing. Anyway to help? Really wish root is available.
Click to expand...
Click to collapse
The TWRP and NoKnox builds for SM-T515 are linked in this post, and you're welcome to give them a try. I'll build another test release when we get the next kernel source update.
I bought this tablet recently which is a Korea set but i realized it comes as t515n model. Does anyone know if this twrp will work?
BTW, the T510XXU2ASI4 kernel source was published this week.
Magendanz said:
The TWRP development thread for Galaxy Tab A 10.1 (2019) is here, but the builds for SM-T515 weren't posted because they never made it through testing.
Click to expand...
Click to collapse
I managed to install TWRP on SM-T515 and root it using Magisk Zip. I tried many files but that one worked:
https://drive.google.com/open?id=1nIqcIzNHyFiwtm7b_NL_F3X-2LWouL7t
I've also backed up rooted stock using TWRP , but cannot recover it using same app.
I've also tried to install Nexus Stock ROM but failed. I'll try to learn how to compile LineageOS on this device. Any help on compiling it would be appreciated. The missing parts as I understand are:
- some way of doing backups well, so I can recover from them and go "back in time"
- TWRP flashable zip package with Nexus ROM or LineageOS
TheCyberd3m0n said:
I managed to install TWRP on SM-T515 and root it using Magisk Zip. I tried many files but that one worked:
https://drive.google.com/open?id=1nIqcIzNHyFiwtm7b_NL_F3X-2LWouL7t
I've also backed up rooted stock using TWRP , but cannot recover it using same app.
I've also tried to install Nexus Stock ROM but failed. I'll try to learn how to compile LineageOS on this device. Any help on compiling it would be appreciated. The missing parts as I understand are:
- some way of doing backups well, so I can recover from them and go "back in time"
- TWRP flashable zip package with Nexus ROM or LineageOS
Click to expand...
Click to collapse
Is yours a Korea set?
No, from Poland
TheCyberd3m0n said:
No, from Poland
Click to expand...
Click to collapse
OK it's ok. Hope someone with a Korean set can reply here if they mange to install twrp and root it.
TheCyberd3m0n said:
I managed to install TWRP on SM-T515 and root it using Magisk Zip. I tried many files but that one worked:
https://drive.google.com/open?id=1nIqcIzNHyFiwtm7b_NL_F3X-2LWouL7t
I've also backed up rooted stock using TWRP , but cannot recover it using same app.
I've also tried to install Nexus Stock ROM but failed. I'll try to learn how to compile LineageOS on this device. Any help on compiling it would be appreciated. The missing parts as I understand are:
- some way of doing backups well, so I can recover from them and go "back in time"
- TWRP flashable zip package with Nexus ROM or LineageOS
Click to expand...
Click to collapse
You can't backup stock using TWRP because the data partition is encrpted. You can format the data partition with TWRP, but you lose EVERYTHING on the partition when you do. Not just things lost when wiping, but all saved stuff like photos, videos etc.
Hi there great to see Samsung development still going on. I had rooted a Samsung tab 2 7.0 long time ago and again have a Samsung tab A 10.1 LTE(T515). I would like to know whether your ROM builds would work with the LTE variant too? With network working too?