[ROM][10.0][FP][OnePlus6T][OFFICIAL]Syberia Project - OnePlus 6T ROMs, Kernels, Recoveries, & Other Dev

[ROM][10.0][FP][OnePlus6T][OFFICIAL]Syberia Project - OnePlus 6T ROMs, Kernels, Recoveries, & Other Dev

first to test it,,.......its running smooth from hours without any issues....great rom

I test it to I had been waiting for it eagerly

Fingerprint is working? Cause on Pie it was broken. Also does it have the Customization options from Pie?

Mannan Qamar said:
Fingerprint is working? Cause on Pie it was broken. Also does it have the Customization options from Pie?
Click to expand...
Click to collapse
Testers reported - all works

coderzs said:
Testers reported - all works
Click to expand...
Click to collapse
The screenshot says A6003. That's OP6 right?
Any idea if Android Auto works?

I installed magisk release.. But I have no root access? Anything else I need to do to gain root access?

wow awesome.. thank you OP...
just one question...
if im coming from open beta..17
can use use the instructions for first installation or is there additional steps?
im referring to this one
first time installation
- Flash latest OOS 9.0.17 full OTA zip, flash TWRP install zip, reboot recovery (will boot to other slot).
- Flash latest OOS 9.0.17 full OTA zip, flash TWRP install zip, reboot recovery (will boot to other slot, now you're on current OOS firmware & patched ramdisk recovery on both slots).
- Flash SyberiaOS & TWRP install zip, reboot recovery.
- Flash GApps (recommended above), wipe cache/dalvik.
- Do the "factory reset" option under wipe. But do NOT do "format data". Don't install Magisk!
- Reboot into system. Now when you do setup, you can add PIN/fingerprints/face unlock/etc.
- Reboot recovery
- Flash Magisk Canary.
- Reboot into system.[/

Oooo how exciting. Love seeing a new ROM thread being started.
Can anyone confirm if they have working banking apps? Fully understand if no-one has gone that far yet with testing.
Sent from my OnePlus6T using XDA Labs

Just a quick question, does Android Auto work fine? Cos other Q ROMs have screen flickering issue with Android Auto.

For those wondering.... It doesn't work on Verizon blahhh lol stupid Verizon!!

hey i clean flashed this rom..it reboots to twrp with set_policy_failed ; /data/display message

This ROM works well. Still testing the different features but really impressed. Thanks Devs

For an initial Build Really Impressive. I haven't tried any other Q Builds. Almost everything works. Dark Theme isn't Pure Black like on Pixels. And I know it's a bit early to ask for features but perhaps the option to hide the Pill while using Q Navigation?

SREEPRAJAY said:
This ROM works well. Still testing the different features but really impressed. Thanks Devs
Click to expand...
Click to collapse
While testing...I found the GPS not working. I have tried a few GPS tools... This is the only thing I found. Very impressed and battery is great at the moment. Smooth and stable

SREEPRAJAY said:
While testing...I found the GPS not working. I have tried a few GPS tools... This is the only thing I found. Very impressed and battery is great at the moment. Smooth and stable
Click to expand...
Click to collapse
It wasn't working for me in maps then i found out that permission got auto denied so I had to allow it manually. then it started working
---------- Post added at 09:27 PM ---------- Previous post was at 09:25 PM ----------
The only issues i found so far are that, lockscreen clock doesn't change no matter how many times you try. and second, i really wished it had double tap to wake screen but i can't find it anywhere in this rom
edit: nvm i found double tap to wake lol. but clock issue is still there

Is there going to be any Verizon support in the future?

I swear, nobody reads my posts. Verizon will NOT be fully functional in ANY 10/Q ROMs for OP6T until the necessary blobs are taken from OnePlus' official 10 release.

Adil Aziz said:
It wasn't working for me in maps then i found out that permission got auto denied so I had to allow it manually. then it started working
---------- Post added at 09:27 PM ---------- Previous post was at 09:25 PM ----------
The only issues i found so far are that, lockscreen clock doesn't change no matter how many times you try. and second, i really wished it had double tap to wake screen but i can't find it anywhere in this rom
edit: nvm i found double tap to wake lol. but clock issue is still there
Click to expand...
Click to collapse
Hey there bud, where did you find tap to wake? I can't find it. Thanks.
Edit: NVM found it under system.

oscarmaldonado said:
Hey there bud, where did you find tap to wake? I can't find it. Thanks.
Click to expand...
Click to collapse
Settings > System > Device features. Scroll down to the bottom.

Related

[ROM][UNOFFICIAL][9.0.0_r33]CypherOS 7.0.0[Enchilada][25/02/2019]

25/02/1019
1) fixed network related issues.
2) added inbuild fluid gestures app( no adb and root required to give permissions)
3) added custome doze package.
17/02/2019
1) updated to February security patch
2) gapps included
3) network issues fixed
4) added hide nave bar in buttons customisation

Great rom!!!!
Thx for this!!

Thank you! I'll try it now

Why is this unofficial sir?

Astrubale said:
Why is this unofficial sir?
Click to expand...
Click to collapse
AOSCP official Pie builds not yet for any device

Is this built with the Feb security update?

Niiiiiiice

Good rom, would be nice to have advanced reboot

cmart4 said:
Is this built with the Feb security update?
Click to expand...
Click to collapse
not at ...after 2 days I will push with Feb security

R33 updated and added gapps in build

Why is the 2nd build more than 2x the size of the first? Just curious
Nevermind gapps incl

cmart4 said:
Why is the 2nd build more than 2x the size of the first? Just curious
Nevermind gapps incl
Click to expand...
Click to collapse
Added gapps,gcam and some other stuff

niiiiiiiice

new build posted
25/02/1019
1) fixed network related issues.
2) added inbuild fluid gestures app( no adb and root required to give permissions)
3) added custome doze package.

Instruction for installation, sir?

ired17 said:
Instruction for installation, sir?
Click to expand...
Click to collapse
1. If you're coming from another ROM or need to perform a clean flash:
Boot into TWRP
MAKE SURE YOU'RE USING ONLY blu_spark TWRP
Flash the latest OxygenOS zip
Flash TWRP Installer
Reboot to recovery
Flash OxygenOS zip again to make sure you have it on both slots
Flash TWRP Installer
Reboot to recovery
Flash ROM (link in first post)
Wipe Data and Cache
DO NOT WIPE SYSTEM!!!!!
Flash TWRP Installer
Reboot to Recovery
Flash GApps
Flash ONLY the latest Magisk
Any mods you want to flash (I won't be supporting Custom Kernels or Xposed)
Reboot to system
2. If you're updating the ROM:
Flash Substratum rescue zip if you have a theme applied
Flash ROM
Flash TWRP Installer
Reboot to recovery
Flash GApps
Flash Magisk
Reboot

Are you also the dev of AOSiP? Just noticed you have the same flashing instruction. Haha. Btw, thanks for the instructions.
---------- Post added at 01:15 PM ---------- Previous post was at 12:46 PM ----------
chandra1.jd said:
1. If you're coming from another ROM or need to perform a clean flash:
Boot into TWRP
MAKE SURE YOU'RE USING ONLY blu_spark TWRP
Flash the latest OxygenOS zip
Flash TWRP Installer
Reboot to recovery
Flash OxygenOS zip again to make sure you have it on both slots
Flash TWRP Installer
Reboot to recovery
Flash ROM (link in first post)
Wipe Data and Cache
DO NOT WIPE SYSTEM!!!!!
Flash TWRP Installer
Reboot to Recovery
Flash GApps
Flash ONLY the latest Magisk
Any mods you want to flash (I won't be supporting Custom Kernels or Xposed)
Reboot to system
2. If you're updating the ROM:
Flash Substratum rescue zip if you have a theme applied
Flash ROM
Flash TWRP Installer
Reboot to recovery
Flash GApps
Flash Magisk
Reboot
Click to expand...
Click to collapse
Are you also the dev of AOSiP? Just noticed you have the same flashing instruction. Haha. Btw, thanks for the instructions.

ired17 said:
Are you also the dev of AOSiP? Just noticed you have the same flashing instruction. Haha. Btw, thanks for the instructions.
---------- Post added at 01:15 PM ---------- Previous post was at 12:46 PM ----------
Are you also the dev of AOSiP? Just noticed you have the same flashing instruction. Haha. Btw, thanks for the instructions.
Click to expand...
Click to collapse
no ..but same process for all roms

Thanks a lot. Btw, oneplus full gestures and slider is properly functioning?

[ROM][9.0][santoni] PixysOS [AOSP][r33][2019/2/06][OFFICIAL]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Pixys is a butter smooth Android aftermarket firmware. We handpicked the best features around and are adding our own juice into it.
Get ready to taste the unique features it brings with itself.
We aim to deliver an experience with original ideas and features along with the useful things the community is accustomed to.
@Subinsmani
@rahul9999
@@ki
@kvijaya
@YashGarg10
@gero
Support Us if you like our work
[SIZE=+1]Got an issue or suggestion? Reach us at[/SIZE]
Telegram: https://telegram.me/pixysos_chat
Networks And Internet
- Roaming Indicator
- 4G Icon
- VoLTE icon
- Show Data Disabled Icon
Apps and Notifications
- Heads Up
- Clock Settings
Battery icon customization
- Portrait, Circle, Dotted circle, Text & hidden battery icon styles
- Hidden, Next to the icon & inside the icon battery % styles
- New charging animation Added to Battery Manager from Pixel Devices
- Clearn button to clear the Battery Stats
Display settings customization
- Font size customization according to percentage
- Toast App Icon (Toggable)
- Lockscreen Charging Info (Toggable)
- DTS(Status Bar) (Toggable)
- 21 Accents Added
- Dark Theme Added
- Black Theme Added
- Accidental Touch
- Recent UI (oreo/pie)
- Dashboard Conditions
- Dashboard Sugesstions
- QS tile Style
- Fonts
Sound settings customization
- Short Cut to prevet Ring added(Pressing power + volume up)
- Screnshot Sound (Toggable)
- Charging Vibration (Toggable)
Security settings customization
- Auto Face Unlock (Toggable)
- fingerprint Authentication Viberation (Toggable)
- DTS on Lockscreen (Toggable)
- Apps Ops
- Lockscreen Powermenue Visibility
- Weather Temp
Button settings customization
- Volume rocker playback control (Toggable)
- Volume rocker wake (Toggable)
- Volume key cursor control
- Clear All Button
- Navigation bar (Toggable)
- Navigation bar customization
Miscellaneous
- Pixel ringtones
- Powermenu customization
- Battery light customization
- Lockscreen shortcuts
- New Wallpaper Credits to @kvijaya
- OTA Updates support
Pixys: PixysOS
Pixys Device Sources: PixysOSDevices
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look in the OP to see if your device is built on a nightly or weekly schedule.
Q. Does this ROM support custom kernels?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP, custom ROM's modify the framework a lot, so Xposed can cause a ton of issues on custom ROM's. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. You will need to use the version arm64/arm/whatever for SDK 27.
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the install instructions in the first post...
Q. Can the builds be dirty flashed over each other?
A. Yes, however make a nandroid backup first as there is a chance of getting a bootloop or encountering bugs. Also bugs may only be reported on a clean flash.
Q. How do I dirty flash builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot", then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash, and then reboot.
Using the ROM:
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
The ROM should contain everything you need to enjoy Android. You don't need to install any Add-on's, simply download the latest ROM, GApps, flash it and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup as this can cause stability issues that are very hard to debug.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
- Backup your personal data (Important)
- Download the ROM and GApps and transfer them to your device.
- Boot to recovery (TWRP recommended).
- Wipe the System, Cache, Data and ART/Dalvik cache.
- Flash the ROM + Gapps Zipfile.
- Flash the root solution of your choice (optional).
- Reboot your device.
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once!
The root solution should be flashed together with every update (= ROM Update)
Currently Supported Root Solutions:
Magisk stable
Magisk versions higher than 14.0 doesn't require flash on every dirty flash depending on the device, some devices need you to flash it every time, unless your maintainer says otherwise it should be fine
ROM:Download
GApps:
Unofficial OpenGApps
OpenGApps
You tell...
- Google for AOSP
- AOSCP
- Dirty Unicorns
- Bootleggers
- Pixel experience
- AOSP extended
- LineageOS
- Nitrogen Os
- Bootleggers Rom
- AICP & POSP Team for thread template idea
- Also many pro devs who all help us to bring this rom to you..
- Please let us know if we forgot to mention your name in credits..
XDA:DevDB Information
Contributors:
anindito12 , aswin_a_s , pyshydv , Harukey
Kernel source:
Here
ROM OS Version: 9.x.x Pie
ROM Kernel: Linux 3.18
Based On: AOSP
Version Information
Status: Beta/Stable
Current Version: v2.x
Release Date: 06-02-2019

@Anindito12 After the 6th February update charging has become very very slow.

Hey @Anindito12 I download the 10th feb update via updater and updated it using Orangefox recovery, after that automatically magisk 18.1 was installed but my phone got bootloop, tried wiping cache,dalvik cache and also data but nothing helped. Now will do clean installation.Please look at this issue.
Edit: Tried clean install without gapps, Magisk but nithing worked.Maybe something wrong with the update. Can someone please confirm if this update works.

mahekvora1997 said:
Hey @Anindito12 I download the 10th feb update via updater and updated it using Orangefox recovery, after that automatically magisk 18.1 was installed but my phone got bootloop, tried wiping cache,dalvik cache and also data but nothing helped. Now will do clean installation.Please look at this issue.
Edit: Tried clean install without gapps, Magisk but nithing worked.Maybe something wrong with the update. Can someone please confirm if this update works.
Click to expand...
Click to collapse
I will fix the problem immediately
wait next build

mahekvora1997 said:
@Anindito12 After the 6th February update charging has become very very slow.
Click to expand...
Click to collapse
did you change the stock kernel?

Anindito12 said:
did you change the stock kernel?
Click to expand...
Click to collapse
No..
---------- Post added at 11:08 AM ---------- Previous post was at 11:05 AM ----------
Anindito12 said:
I will fix the problem immediately
wait next build
Click to expand...
Click to collapse
Just a question.. Can we expect the new build today??

mahekvora1997 said:
No..
---------- Post added at 11:08 AM ---------- Previous post was at 11:05 AM ----------
Just a question.. Can we expect the new build today??
Click to expand...
Click to collapse
yes check update now

Hello, I'm using the latest build and I really love it. Seriously. But then my phone started to overheat and reboot itself. Does this happen because of the kernel? Please help.

qibs123 said:
Hello, I'm using the latest build and I really love it. Seriously. But then my phone started to overheat and reboot itself. Does this happen because of the kernel? Please help.
Click to expand...
Click to collapse
try changing the kernel, but I have no problem about that

Anindito12 said:
try changing the kernel, but I have no problem about that
Click to expand...
Click to collapse
Okay I'll try. Anyway, good job on this rom. I always had a problem with signal strength in custom roms but this one. Well done ??

qibs123 said:
Okay I'll try. Anyway, good job on this rom. I always had a problem with signal strength in custom roms but this one. Well done
Click to expand...
Click to collapse
good

!!!!! New update is out now !!!!!

mahekvora1997 said:
!!!!! New update is out now !!!!!
Click to expand...
Click to collapse
Edge gesture? There or not?

Installed via Updater, ended in stuck at Bootlogo for me :crying:
Anyone facing similar problems?
Try to recover TWRP Backup right now but there are also stuck-problems.
Any suggestions?

magic_doc said:
Installed via Updater, ended in stuck at Bootlogo for me :crying:
Anyone facing similar problems?
Try to recover TWRP Backup right now but there are also stuck-problems.
Any suggestions?
Click to expand...
Click to collapse
Which twrp are you using??

I use 3.2.3-1 (installed from twrp-3.2.3-1-santoni.img)

magic_doc said:
I use 3.2.3-1 (installed from twrp-3.2.3-1-santoni.img)
Click to expand...
Click to collapse
Use a treble supported recovery. I use orangefox recovery and I never had any issues. Try orangefox recovery and you will not have any issues with this rom updates or even other rom updates.

mahekvora1997 said:
Use a treble supported recovery. I use orangefox recovery and I never had any issues. Try orangefox recovery and you will not have any issues with this rom updates or even other rom updates.
Click to expand...
Click to collapse
Thanks for the advice, but this TWRP is supposed to be treble-supported and it's recommended on the front page:
TWRP recommended
I am going through the whole setup process from scratch with TWRP right now, first of all having wiped cache, data, dvalnik and system as recommended.
I would be willing to try out orangefox recovery if it works better, but is the ota-update-mechanism is supporting this also?

magic_doc said:
Thanks for the advice, but this TWRP is supposed to be treble-supported and it's recommended on the front page:
TWRP recommended
I am going through the whole setup process from scratch with TWRP right now, first of all having wiped cache, data, dvalnik and system as recommended.
I would be willing to try out orangefox recovery if it works better, but is the ota-update-mechanism is supporting this also?
Click to expand...
Click to collapse
Yes orangefox supports ota updates. Also miui updates are supported by orangefox recovery. Visit their website www.orangefox.tech and read details. I used redwolf recovery few months back but it gave me issues so changed the recovery and now orangefox is working flawlessly.

mahekvora1997 said:
Yes orangefox supports ota updates. Also miui updates are supported by orangefox recovery. Visit their website www.orangefox.tech and read details. I used redwolf recovery few months back but it gave me issues so changed the recovery and now orangefox is working flawlessly.
Click to expand...
Click to collapse
Thanks, tried it yesterday and it worked for me. Just another question: which baseband firmware do you use? I'm still on 037_PA.
I experience little trouble with flight mode:
With february's build, shortcut in power button menue worked perfectly, no I cannot switch the flight mode off again from time to time, the plane button in power menue simply doesnt't response.
When I used the button in the buttom tray, it askes for the sim's pin every time which was definitely not that way before.
Workaround is to deactivate pin but that is not what I wanted.
Could that be a firmware issue?
Glad about any suggestions

[ROM][OFFICIAL] Omnirom for Zenfone6 (2019) [Deprecated, see Q Thread]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is Omnirom ?
Selinux Status:
Enforcing
Instructions :
Follow this Steps by steps
You need to be in stock Asus ***.189 or .191., on both slots Please. Current active slot A
First Install
* Download Rom , TWRP, GAPPS (nano)
* REMOVE ALL FINGERPRINT/LOCKSCREEN SECURITY in your current ROM
* reboot to bootloader
* fastboot boot nameofyourtwrp.img
* flash omnirom.zip
* flash twrp-recovery_installer.zip
* reboot recovery
* Wipe (swipe for perform factory reset)
* flash GAPPS
* flash Magisk (optional)
* reboot and profite
Update for unofficial release
* reboot to recovery
* flash omnirom.zip
* flash twrp-recovery_installer.zip
* reboot recovery
* flash GAPPS
* flash Magisk (optional)
OTA (For official)
Use OTA inside rom for updates. nano gapps backup included.
if u did something else. we dont need/wanna know about it in the thread
Device Maintainers
@micky387
Download:
OPENGAPPS ( ONLY NANO RECOMMENDED)
Last stable Magisk if needed
TWRP @mauronofrio
Official Omnirom build
Telegram Group:
Official OmniROM Community
Omnirom Zenfone6/6Z
Source Code
Omnirom
Omnirom gerrit
XDA:DevDB Information
Omnirom for Zenfone6 (2019), ROM for the ASUS ZenFone 6 (2019)
Contributors
micky387
Source Code: https://github.com/omnirom
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Beta Release Date: 2019-08-20
Created 2019-08-20
Last Updated 2019-09-08

Changelog 09-15
* Add (Partially) Smart Key for Google Assist
* Add Asus Camera in the build.
* Fix Selinux Denied for This App Asus Camera
* Add Night Mode for camera
Changelog 09-08
* Fix mediaprovider selinux denial (you can now read/open your sound track on your Sdcard)
Changelog 2019-09-05
* Fix audio issue
* Add Swipe Up unlock support
Changelog 2019-08-31
* Add offscreen gestures support
* Update FP and proprietary blobs to 191
* Ability to use @mauronofrio twrp recovery to flash stock and omnirom
* Add/Update camera blobs
Changelog 2019-08-23
* Add Fm Support
* Update FP for August security patch

Enjoy and good play

Happy to see a second ROM for the ZF6, thanks for the work!
Does this work with the port of the Asus camera?

abprie said:
Happy to see a second ROM for the ZF6, thanks for the work!
Does this work with the port of the Asus camera?
Click to expand...
Click to collapse
certainly, test and report

micky387 said:
certainly, test and report
Click to expand...
Click to collapse
Hehe... that's a confusing answer though. Don't you own a ZF6?

abprie said:
Hehe... that's a confusing answer though. Don't you own a ZF6?
Click to expand...
Click to collapse
ofc yes, but i dont tested Asus camera port. include and using Snapdragoncamera 2

Thanks so much for this!
Is there any way to enable dark mode like on lineage?
For those interested: nandroid backup and flashing works with the provided twrp.

isthisadagger said:
Thanks so much for this!
Is there any way to enable dark mode like on lineage?
For those interested: nandroid backup and flashing works with the provided twrp.
Click to expand...
Click to collapse
If dark Device theme isnt good in Display--> Device theme, you need to enable dev option to force Night Mode

New update available in OP
Changelog 2019-08-23
* Add Fm Support
* Update FP for August security patch
Click to expand...
Click to collapse

Hi firstly would like to thank for this amazing rom of its stability and all. With that said, installation of this rom took me hours since iam new to the A/B boot partition of the phone (previous phone used was the note8 with no A/B Boot partition) but then again you need to get used to it. With that said, asuscamera.zip port works on the rom. When first launch of rom go to panoroma for front camera to flip thereafter it worked properly then.With that i have a couple of suggestions for the said phone since iam wanting to used this rom as daily driver
1st. For Security wise, i hope in future update you would introduce front facing unlocked of the phone since its one of the features of the phone which is flip cam.
2nd. For the notifications toggles, i hope you would also have the toggles of the sound/vibrate and mute since its quite easier by pulling down noti instead of pressing volume button and mute/vibrate the phone.
3rd. For the omniswitch launcher , i hope in future you would introduce folder of putting in apps as its rather untidy seeing my homefeed fill with apps all over the place.
4th. Also its rather confusing now since that theres omniswitch and also the normal way of using the phone of swiping up for recents item and also swiping down for notifications toggles so i hope you can enable/disable either.
With that said hope you listen to my above suggestion and also may i asked where i can donate

Hi developer, since it needs wipe data when installing.
I would like to know if there is retract camera and double tap to wake feature?

Add to that also the fingerprint unlocked sometimes worked sometimes it did not so it needs to get some fix there.
---------- Post added at 10:18 AM ---------- Previous post was at 10:16 AM ----------
checkin1991 said:
Hi developer, since it needs wipe data when installing.
I would like to know if there is retract camera and double tap to wake feature?
Click to expand...
Click to collapse
Double tap to wake works and retract camera is there too.

I installed the latest update from ASUS. And I am unable to boot this ROM. Not sure if Im doing something wrong or if it just not supported.
I followed your instructions, tried your TWRP, TWRP from the TWRP post.
Just loops to the ASUS logo, or just stays at the ASUS logo.

ZeroPoke said:
I installed the latest update from ASUS. And I am unable to boot this ROM. Not sure if Im doing something wrong or if it just not supported.
I followed your instructions, tried your TWRP, TWRP from the TWRP post.
Just loops to the ASUS logo, or just stays at the ASUS logo.
Click to expand...
Click to collapse
I installed Omni successfully on Stock 174 and stock 189 with the provided TWRP 18.
Did you try it with boot to twrp > flash twrp installer > reboot to twrp > format > reboot to twrp > flash omni + twrp installer > reboot twrp > wipe > flash gapps?

isthisadagger said:
I installed Omni successfully on Stock 174 and stock 189 with the provided TWRP 18.
Did you try it with boot to twrp > flash twrp installer > reboot to twrp > format > reboot to twrp > flash omni + twrp installer > reboot twrp > wipe > flash gapps?
Click to expand...
Click to collapse
Very close to that. I didnt format between the two reboots to TWRP.
Maybe Ill give that a shoot when I get home from work today.
Edit: Thanks Dude. I got it to boot.

Has anyone used the speaker in WhatsApp or telegram calls? Even on the lowest volume setting it is very loud. Is there any setting to lower the min volume?

Hi guys
OP updated with new build
Changelog 2019-08-31
* Add offscreen gestures support
* Update FP and proprietary blobs to 191
* Ability to use @mauronofrio twrp recovery to flash stock and omnirom
* Add/Update camera blobs
Click to expand...
Click to collapse

amiruls said:
Hi firstly would like to thank for this amazing rom of its stability and all. With that said, installation of this rom took me hours since iam new to the A/B boot partition of the phone (previous phone used was the note8 with no A/B Boot partition) but then again you need to get used to it. With that said, asuscamera.zip port works on the rom. When first launch of rom go to panoroma for front camera to flip thereafter it worked properly then.With that i have a couple of suggestions for the said phone since iam wanting to used this rom as daily driver
1st. For Security wise, i hope in future update you would introduce front facing unlocked of the phone since its one of the features of the phone which is flip cam.
2nd. For the notifications toggles, i hope you would also have the toggles of the sound/vibrate and mute since its quite easier by pulling down noti instead of pressing volume button and mute/vibrate the phone.
3rd. For the omniswitch launcher , i hope in future you would introduce folder of putting in apps as its rather untidy seeing my homefeed fill with apps all over the place.
4th. Also its rather confusing now since that theres omniswitch and also the normal way of using the phone of swiping up for recents item and also swiping down for notifications toggles so i hope you can enable/disable either.
With that said hope you listen to my above suggestion and also may i asked where i can donate
Click to expand...
Click to collapse
Thanks for your report
1/ Already inside. With nano gapps installed ofc, go to security-->smart lock and active. And go to omnigears--> lockscreen and switch on Auto Unlock
2/ We will look at that but may be under Q because it is soon ....
3/ i dont know if max want that...

amiruls said:
Add to that also the fingerprint unlocked sometimes worked sometimes it did not so it needs to get some fix there.
Click to expand...
Click to collapse
No problem for me but i have added more wakelock time for FP

Development [ROM] [11.0] [UNOFFICIAL] [FINAL BUILD] ShapeShiftOS [venus]

Congrat Mate ! Test quicky and feedback

UPDATE : Flashing the DTBO image is no longer necessary, i fixed it

ralovesoc said:
UPDATE : Flashing the DTBO image is no longer necessary, i fixed it
Click to expand...
Click to collapse
thank you for your work

good evening or find the Lineage recovery? thank you

jejemc said:
good evening or find the Lineage recovery? thank you
Click to expand...
Click to collapse
LOS Recovery is on the boot.img
So when you flash boot.img purposed on the OP, recovery is installed

Nice. love to see roms poping up now.
Which launcher is used on this rom? Cant stand the Pixel Experience one

Hope the FOD work soon

are there plans to update this ROM ?

muellerdeluxe said:
are there plans to update this ROM ?
Click to expand...
Click to collapse
+1
Want an update with D2TW fixed ^^
Come on bro

posted a new build
changelog : updated kernel , fixed fod

ralovesoc said:
posted a new build
changelog : updated kernel , fixed fod
Click to expand...
Click to collapse
Where link? Gpay work?

Updated.
Changelog : fixed DT2W, added Screen Off FOD, added FOD animations, fixed random color flashes when switching to AOD mode or when pressing FOD when screen is OFF, improved FOD speed and accuracy, kernel improvements, optimized handling of touchscreen spi transfers, patched ANXCamera zip to provide missing libraries.
Stop asking for the link, i just update the one that's already there in the post.

ralovesoc said:
Updated.
Changelog : fixed DT2W, added Screen Off FOD, added FOD animations, fixed random color flashes when switching to AOD mode or when pressing FOD when screen is OFF, improved FOD speed and accuracy, kernel improvements, optimized handling of touchscreen spi transfers, patched ANXCamera zip to provide missing libraries.
Stop asking for the link, i just update the one that's already there in the post.
Click to expand...
Click to collapse
Good work mate, now ssos is updated like the lastst LOS
Will install after work !

Absoluetly amazing rom and running buttery smooth. the only issue im facing is that super macro doesn't work in the ANX camera but apart from that there is no issues at all. thanks for your hard work

skyler13 said:
Absoluetly amazing rom and running buttery smooth. the only issue im facing is that super macro doesn't work in the ANX camera but apart from that there is no issues at all. thanks for your hard work
Click to expand...
Click to collapse
Can you use gpay? And bluetooth any delays? Thanks

Has anyone tried to flash ShapeShift with the fixed twrp ?

ralovesoc said:
更新。
更新日志：修复DT2W，添加屏幕关闭FOD，添加FOD动画，修复切换到AOD或屏幕关闭时按下FOD时的随机颜色颜色，FOD速度和精确度，优化改进，优化处理屏幕spi传输，通讯ANXCamera zip 以提供删除的库。
停止要求链接，我只是更新帖子中已经存在的链接。
Click to expand...
Click to collapse
Used it for the first time

Hunteres said:
Can you use gpay? And bluetooth any delays? Thanks
Click to expand...
Click to collapse
No, Google Pay doesn't seem to want to work even with Safety Net passing and being hidden in Magisk Hide. i've not noticed any issues with Bluetooth, been listening to music through my bluetooth headphones.
muellerdeluxe said:
Has anyone tried to flash ShapeShift with the fixed twrp ?
Click to expand...
Click to collapse
Shapeshift won't flash in Twrp as it's all in the payload.bin which has to be sideloaded onto the phone using the lineageos recovery.

skyler13 said:
No, Google Pay doesn't seem to want to work even with Safety Net passing and being hidden in Magisk Hide. i've not noticed any issues with Bluetooth, been listening to music through my bluetooth headphones.
Shapeshift won't flash in Twrp as it's all in the payload.bin which has to be sideloaded onto the phone using the lineageos recovery.
Click to expand...
Click to collapse
Gpay works....just flashed and tried.... Install the hide module from magisk and restart...it works
its called magisk hide props

[CLOSED] [ROM][12.1][OnePlus6][OFFICIAL]Syberia Project

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* Syberia Team not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications.
*/
Read the whole OP! Be respectful to each other and don't ask for ETAs, it's considered as being rude!
Syberia Project (aka Syberia OS) is a custom ROM for OnePlus 6 that implements various features. This project was designed by our "Syberia Team" from
scratch based on AOSP source code with some CAF fixes and improvements. Our team: @DennySPB, @blinoff82, @alexxxdev. Also many thanks to our designers @rlshukhov and
@a18h for logos, wallpapers and bootanimations.
If you like our work you can buy us a cup of coffee or a glass of beer
Here
Code:
Monet
VoLTE, VoWiFi
LineageOS LiveDisplay
MicroG support
Pocket Judge
Call recording
Statusbar items switches
Three finger swipe to screenshot
Extended powermenu
Scramble pin layout option
Quick pin unlock option
PowerOff torch on power button
Volume rocker wakup option
Volume key music controll
More VoLTE/VoWifi statusbar icons
Advanced gesture navigation options
Lockscreen charging information
DataSwitch tile
Volume keys cursor control
Statusbar clock/date customization
Lockscreen visualizer
Lockscreen media art toggle with blur options
Statusbar battery styles
Flipendo (extreme battery saver) tile
Brightness slider in QS options
Reboot QS tile
Separate wifi/data QS tiles
Caffein QS tile
Sound tile
Flash on call waiting option
Network traffic monitor
Battery/Notification LED lights customization
NavBar inverse option
...Settings and features will be gradually added.
SyberiaOS ROM Download
Gapps Download (recommended)
Magisk Alpha Download
OOS 11 Firmware
First time clean installation:
Code:
- Unlocked bootloader is required
- Download ROM.zip, latest OOS 11 firmware (optional: Gapps, Magisk) and put to internal memory
- Boot into TWRP
- Once twrp booted go to "Install" -> choose ROM.zip
- Reboot -> recovery
- Go to "Install" -> choose OOS firmware.zip, Gapps.zip (optional Magisk, Gapps-Addons etc.)
- Go to "Wipe" -> Swipe for factory reset, then Format data (via "yes")
- Reboot -> System
- Enjoy.
Updating:
Code:
- Reboot into TWRP
- Go to "Install" -> choose ROM.zip
- Reboot -> recovery
- Go to "Install" -> choose Gapps.zip (optional Magisk, Gapps-Addons etc.)
- Reboot -> System
Code:
Encryption may not work
Attention! We are not responsible for the operability of your device if you use third-party kernel, Xposed Framework or unverified Magisk modules.
Official website
Syberia Project Github
Syberia Project Gerrit
Syberia Project Kernel Source
Code:
- LineageOS
- AOSPA (aka Paranoid Android)
- Nitrogen Project
- Benzo Rom

Works:
- Everything
Known bugs:
- A2DP offload
- Selinux: permissive
Download link:
[Mod Edit] Link removed

Magisk and safetynet:
1. Download latest magisk alpha from open post or here.
2. Install zip from twrp
3. Rename zip to apk and install magisk app
4. Go to magisk settings and setup like on screenshots
[/HIDE}

Woow...thanks for supporting op6

Download page shows A11 not A12 but on sourceforge.net found A12 5.0 version. Thanks

bhargav patil said:
Download page shows A11 not A12 but on sourceforge.net found A12 5.0 version. Thanks
Click to expand...
Click to collapse
Site will show latest info ASAP. That why i post temporary direct link to SF

We need to install Rom before OOS?

shemanthv9 said:
We need to install Rom before OOS?
Click to expand...
Click to collapse
Check initial install instruction another time. U doesn't need to flash anything. Just flash ROM, firmware (link provided in OP}

DennySPB said:
Check initial install instruction another time. U doesn't need to flash anything. Just flash ROM, firmware (link provided in OP}
Click to expand...
Click to collapse
if I am already on a rom based on oos 11 then can i simply 'format data', flash syberia+twrp, reboot recovery, flash gapps and reboot to system just like I do with any other oos 11 based rom?

umangtayal said:
if I am already on a rom based on oos 11 then can i simply 'format data', flash syberia+twrp, reboot recovery, flash gapps and reboot to system just like I do with any other oos 11 based rom?
Click to expand...
Click to collapse
Yes

I don't understand the magisk link. It redirects to GitHub actions, artifacts does not make sense. Did I miss something?

stormPremier said:
I don't understand the magisk link. It redirects to GitHub actions, artifacts does not make sense. Did I miss something?
Click to expand...
Click to collapse
Download latest artefact (it's a build).

I rephrase: the artifacts contains three APK. I'm used to flash the official magisk.apk. Which one should I use?

stormPremier said:
I rephrase: the artifacts contains three APK. I'm used to flash the official magisk.apk. Which one should I use?
Click to expand...
Click to collapse
the app-release one

stormPremier said:
I rephrase: the artifacts contains three APK. I'm used to flash the official magisk.apk. Which one should I use?
Click to expand...
Click to collapse
I post magisk and instruction in 3d post. How to setup it for safetynet bypass.

Booted with f2fs and flamegapps!

Device tree?

Which TWRP version should we use? I was on stock OOS 11.1.1.1, unlocked bootloader and got the error QUALCOMM crashdump mode when trying to install TWRP. Any help, please?

Wow this is fast . Thanks for the ROM

Hi! i tried flashing using the instructions mutiple times comming from OOS11 but everytime it keeps restarting and eventually it enters by itself in TWRP. Anyone know why is this hapening?

Database Develop

welcome