Database Develop

Mi5 dead! please some ideas!

Hi all,
I going to tell you the complete story and any ideas orsuggestions will be appreciated.
I bought my mi5 in July. It came with a fake ROM but Ichanged it to OFFICAL GLOBAL STABLE .
Since then, I used the device perfectly fine, and follow theMIUI forum regularly.
Then in November I applied for betatesting Team and theyaccepted me. As my bootloader was still locked, I tried option one from abovetutorial, so I directly downloaded in my phone the GLOBAL DEV ROM and Ichoosing the package I started using Nougat for about a month, more or less.
Then, the tragedy happened. I was in a bar, having my phonein my trousers back pocket, and I set down that way. One minute, no more. Thephone´s battery was around 70%. When I realized I quickly took it but it wasnot able to turn on… Nothing pressing power volume + or any combination… I came home and let it charging all night (wallcharger) and nothing the morning after.
I tried to connect it to my PC but nothing happened in the screen,but pressing Power Volume+ the Windowsdevice Manager recognized it as “Android phone”, so after reading some threads about bootloader issues I decidesto flash it. I requested permission and then flashed it with the latest CHINADEV version. The flashing was completed, but the phone still not turningon. NEXT STEP: Local Technical Service.
They had my phone during a week. They tried to change thescreen, nothing, the battery nothing, and I don’t know which other tests theyperformed but they called me back to tell they were not able of doing nothing.
Having the phone back at home, now I was not able to get thePC seeing it as Android phone again. Nothin. Desperate me, I continued to read in internet and found in XDA a video where basically, you open the phone (remove back, and some screws),short two pins, and the PC is able to see it through the Qualcomm USB driversin EDL mode. Then flashing IS POSSIBLE. That is true. I am able to flashing,and I have tried CHINAs, GLOBAL, older ROMs about a dozen. Always the flash processsucceed, but the phone still not turning on.
After flashing I let the phone the whole night plugged inthe PC usb. Nothing
Now is plugged again to the wall charger, but nothing.
There are many threads with different solutions, so guys,please, anyone with a good idea to try??
Many Many thanks in advanced

https://forum.xda-developers.com/mi-5/help/bricked-mi5-t3528810
Read this and
Use only the versions mentioned

this device is just a chinese junk i regret bought it , just after 2 days i bought it got hard bricked .
anyway flash 7.2.4 and if phone didnt boot use 3 button ( up + down + power ) for 1 minute or more and it must boot , it did work for me .

I just got brick yesterday and followed those instructions. It really worked. I was finally able to flash china dev 6.11.10. Latest dev said just "missed hello packet".
MiFlash version 2016.04 and china dev 6.11.10 was right combination for me. I connected Mi5 to PC while pressing vol- and power buttons, then I released them. I opened miflash, selected rom and chose "flash all". Flashing was completed. I tried to power on my phone pressing power button but nothing. But when I pressed vol- and power, I was able to get to fastboot mode. Rest is history. I flashed TWRP, booted to it and flashed LineageOS again.
Hope it works for you too!

xmmn said:
this device is just a chinese junk i regret bought it , just after 2 days i bought it got hard bricked .
anyway flash 7.2.4 and if phone didnt boot use 3 button ( up + down + power ) for 1 minute or more and it must boot , it did work for me .
Click to expand...
Click to collapse
Which 7.2.4 please??

[email protected] said:
Which 7.2.4 please??
Click to expand...
Click to collapse
hope it work for u . i read some people + me got device booted with this .
gemini_global_images_V7.2.4.0.MAAMIDC_20160129.0000.14_6.0_global
you can download from xiaomininja just search in google

xmmn said:
hope it work for u . i read some people + me got device booted with this .
gemini_global_images_V7.2.4.0.MAAMIDC_20160129.0000.14_6.0_global
you can download from xiaomininja just search in google
Click to expand...
Click to collapse
not worked

Nbkdnssr said:
I just got brick yesterday and followed those instructions. It really worked. I was finally able to flash china dev 6.11.10. Latest dev said just "missed hello packet".
MiFlash version 2016.04 and china dev 6.11.10 was right combination for me. I connected Mi5 to PC while pressing vol- and power buttons, then I released them. I opened miflash, selected rom and chose "flash all". Flashing was completed. I tried to power on my phone pressing power button but nothing. But when I pressed vol- and power, I was able to get to fastboot mode. Rest is history. I flashed TWRP, booted to it and flashed LineageOS again.
Hope it works for you too!
Click to expand...
Click to collapse
im not able to find the rom... could you help me?

[email protected] said:
im not able to find the rom... could you help me?
Click to expand...
Click to collapse
Sorry, it was global dev 6.11.10 that I used, not china dev.
I downloaded it via this link: http://xiaomininja.com/2016/11/11/m...1-10-is-out-download-it-here-for-your-device/

Nbkdnssr said:
Sorry, it was global dev 6.11.10 that I used, not china dev.
I downloaded it via this link: http://xiaomininja.com/2016/11/11/m...1-10-is-out-download-it-here-for-your-device/
Click to expand...
Click to collapse
Thanka for your hel but finally not worked...

Did you already tried to pressing and hold vol up + power button then at the same time repeatedly pressing vol down button until mi logo appear..?, id not yet..just try this method repeatedly.

JJeamy said:
Did you already tried to pressing and hold vol up + power button then at the same time repeatedly pressing vol down button until mi logo appear..?, id not yet..just try this method repeatedly.
Click to expand...
Click to collapse
I am trying that but screen is istill black.. maybe is a hardware issue? it is weird having flash working fine, isn´t it?

[email protected] said:
I am trying that but screen is istill black.. maybe is a hardware issue? it is weird having flash working fine, isn´t it?
Click to expand...
Click to collapse
Yup..it's weird thing...i suspect there's a hardware issue too..
But anyway..did you already tried to flashing fastboot rom with QFIL (qualcomm tool) too..?, if not yet..just try it..you can follow tutorial from this youtube here , just bypassing the step for installing any driver if your phone already detected as qualcomm port in your pc.
I try this method to get back my friend Mi4c from dead with condition like this too..just edl or qualcomm port while connect in device manager, then after flashing with this tool..i've try to power on with vol up + power and repeatedly vol down method above..then mi logo appear.
Hope your phone get back turn on soon..

JJeamy said:
Yup..it's weird thing...i suspect there's a hardware issue too..
But anyway..did you already tried to flashing fastboot rom with QFIL (qualcomm tool) too..?, if not yet..just try it..you can follow tutorial from this youtube here , just bypassing the step for installing any driver if your phone already detected as qualcomm port in your pc.
I try this method to get back my friend Mi4c from dead with condition like this too..just edl or qualcomm port while connect in device manager, then after flashing with this tool..i've try to power on with vol up + power and repeatedly vol down method above..then mi logo appear.
Hope your phone get back turn on soon..
Click to expand...
Click to collapse
Can you help me to find a correct ROM to try?

[email protected] said:
Can you help me to find a correct ROM to try?
Click to expand...
Click to collapse
You can try this official global stable fastboot rom that's still based android 6.0 here
If above direct link doesn't work..just visit this link , then choose "Xiaomi Mi5 Global Stable or China Stable Version Fastboot File Download..
If getting error while flashing..just put extracted folder of fastboot rom in the root of your system..ie C:\[folder_fasboot_rom]

Hi all,
After a million tests, now the phone is able to go to fastboot mode easly just pressing power&volume- (even having a black screen...) Any idea to see if this is still worth to fight?
Regards!

[email protected] said:
Hi all,
After a million tests, now the phone is able to go to fastboot mode easly just pressing power&volume- (even having a black screen...) Any idea to see if this is still worth to fight?
Regards!
Click to expand...
Click to collapse
Just try typing command "fastboot oem device-info" to see the status of your bootloader...is it still at unlocked or already relocked..?
If still at unlocked state..you can flashing fastboot rom with miflash tool.
Anyway what about QFIL method above that i said before..?, any change happen after flashing with this tool..?

[email protected] said:
not worked
Click to expand...
Click to collapse
Did you test it?
Keyvannn said:
Solved with this way
Originally Posted by adwinp
1: if you're detecting it as qcom 9008, there's a good chance it's in EDL mode, which is good news
2: download MiFlash from here: https://www.androidfilehost.com/?fid=24521665358595574
3: download the latest dev rom from here: http://update.miui.com/updates/v1/fu...ni&b=X&r=cn&n=
4: Extract the files to C:\
5: Open MiFlash & point the folder to the root ROM folder, example: C:\gemini_foo_bar, NOT C:\gemini_foo_bar\images
6: connect your phone & select flash all (1st option from the left, bottom of MiFlash tool)
This might take a few tries (example - you might receive "missed hello packets)
Once you're done, you can stay with the China Dev, unlock the bootloader & flash a xiaomi.eu rom, or CM.
Good luck.
Click to expand...
Click to collapse
------
I do this way several time but with updated miflash and fastboot rom and nothing happen.
But with this mi flash and global stable 7.2.4 and only selected #all flash#
My phone flashed
Im very happy
Thanks alot
Sorry for my bad english
Click to expand...
Click to collapse

Keyvannn said:
Did you test it?
Click to expand...
Click to collapse
I tried this and not worked for me...

JJeamy said:
Just try typing command "fastboot oem device-info" to see the status of your bootloader...is it still at unlocked or already relocked..?
If still at unlocked state..you can flashing fastboot rom with miflash tool.
Anyway what about QFIL method above that i said before..?, any change happen after flashing with this tool..?
Click to expand...
Click to collapse
I havent tried yet QFIL, but I will and let you know... Thanks so much!

Mi9 Global - Accidentally locked bootloader and stock in recovery/fastboot

Hi,
Recently purchased a Mi 9 Global version, got the OTA update to MIUI 11, and everything was well. It is a superb phone, but I like to have root on my phones (mostly for Adblocking and System2, better control overall). I tried to install TWRP (custom version for Mi9) because I wanted to install Magisk/Root or try a different rom eventually. Anyway... I made a huge mistake. After trying to reboot, I noticed things had gone wrong, and was stuck in a boot loop. I guess I panicked and tried to flash the phone back to the latest global MIUI rom (Version 11, Android 10, from official site), using the Xiaomi Flash App but I did not uncheck the "clean and lock bootloader" checkbox on the bottom right of the app, which is somehow enabled by default. The flash failed at that time, for unknown reason, but it seems like it succeeded in locking my bootloader, with an empty partition, except for fastboot access and Mi Recovery module. I have to admit I've always been pretty lucky with all my previous flashes on other devices, and I guess I got a little careless. That was pretty stupid of me, in retrospect.
Since then, I am stuck in either Mi Recovery or Fastboot, and it seems that my originally Global Mi 9 with unlock bootloader has now a locked bootloader. Any attempt at either using the Xiaomi Flash utility gives me an error message ("Erase boot error"), and if I boot into Fastboot and try to flash TWRP, I get the "Remote:Erase is not allowed in Lock State" error.
From what I understand, my options are pretty limited now. The phone is still powered on, stuck in Recovery mode and rebooting every 5 or 10 minutes by itself (probably a way to avoid screen burn-in?), but I can't seem to be able to shut it down in anyway, as there are no fastboot commands to send a shutdown signal. And no matter what button combination I press, the phone always ends up rebooting.
I tried the Xiaomi Unlocker utility, but it needs the phone to be out of recovery to check the credentials binding the phone to my account. All data on the phone has been wiped already, so that's not an option. Two options I have seen :
1. Open the battery cover (required a heat gun and risky), to short some pins and try to flash while there is a short to circumvent the security. I'm not that brave yet, and since the phone is still running and has probably about 80% battery, I don't want to use a heat gun on the device.
2. Shady stuff involving paying 30 or 40 Euros to a random guy who can somehow make everything work magically by remotely logging in on my computer via Teamviewer (Not happening in a million years).
I'm wondering if there is an alternative, other than bringing the device to an official Xiaomi store (I'm in Bangkok and they do have one official shop at Fortune Town), but even then, I don't know if they'll just tell me I got myself an expensive paperweight.
Any help/insight regarding this issue would be much, much appreciated!

Have you tried to press and hold power+vol down when your device reboots? Just before it turns on.

g_seva said:
Have you tried to press and hold power+vol down when your device reboots? Just before it turns on.
Click to expand...
Click to collapse
Every possible combination on reboot will either bring me to Fastboot or Mi Recovery. I have wiped the data partition, there is no OS on the phone as of now.

Twomby said:
Every possible combination on reboot will either bring me to Fastboot or Mi Recovery. I have wiped the data partition, there is no OS on the phone as of now.
Click to expand...
Click to collapse
So xiaomi unlock utility can't unlock bootloader in fastboot?
May be try to use xiaomitool v2.

g_seva said:
So xiaomi unlock utility can't unlock bootloader in fastboot?
May be try to use xiaomitool v2.
Click to expand...
Click to collapse
Xiaomitool V2 is completely useless. The "My phone is bricked" option is not implemented, and I cannot boot into the OS, unfortunately.

To enter fastboot mode, long press the volume down key and the power key. Then unlock bootloader with Xiaomi app.

zahdekar said:
To enter fastboot mode, long press the volume down key and the power key. Then flash stock rom.
Click to expand...
Click to collapse
I have managed to enter fastboot mode, as described in my initial post. The problem is that when I try to flash, I get the following error: "Flashing not allowed in lock state".

Twomby said:
Xiaomitool V2 is completely useless. The "My phone is bricked" option is not implemented, and I cannot boot into the OS, unfortunately.
Click to expand...
Click to collapse
Yep, but it has unlock option in the normal mode and it use scripts made by tool developer, so it worth to try.

g_seva said:
Yep, but it has unlock option in the normal mode and it use scripts made by tool developer, so it worth to try.
Click to expand...
Click to collapse
From what I understand, the "normal mode" needs the tool to be able to access the OS while it's running. I don't have an OS. I will give it a shot tomorrow (3 AM here, exhausted, and don't want to boot into Windows again!), but my hopes are not so high. Anyway, thanks for the help, much appreciated! Will let you know what happens! Cheers!

https://forum.xda-developers.com/Mi-9/how-to/unbrick-mi9-bootloader-locked-destroyed-t3924966/amp/
maybe it will help

zahdekar said:
https://forum.xda-developers.com/Mi-9/how-to/unbrick-mi9-bootloader-locked-destroyed-t3924966/amp/
maybe it will help
Click to expand...
Click to collapse
I've stumbled upon this link earlier today. But it's 404 on my end. Can you access it from where you are? Thanks!

http://c.mi.com/thread-2251372-1-1.html
This is on page 4

zahdekar said:
http://c.mi.com/thread-2251372-1-1.html
This is on page 4
Click to expand...
Click to collapse
Thanks. Tried it, but using these commands only cause a reboot, to recovery mode again. Thanks again for your kind help!

Twomby said:
Thanks. Tried it, but using these commands only cause a reboot, to recovery mode again. Thanks again for your kind help!
Click to expand...
Click to collapse
I have the same problem! "The system has been destroyed" (((
And mi unlock tool not work abount 2 days (authorization not passes)

https://forum.xda-developers.com/Mi-9/help/help-bricked-mi-9-t3921980/page2
The old version of miunlock is working ti unlock bootloader.

zahdekar said:
https://forum.xda-developers.com/Mi-9/help/help-bricked-mi-9-t3921980/page2
The old version of miunlock is working ti unlock bootloader.
Click to expand...
Click to collapse
Unfortunately, this is not true. I have downloaded an old version of Mi Unlock (2.2.406.5), which is supposed to work with Fastboot mode. The result is "Couldn't unlock --> Please download the latest version". And the latest version needs to access the OS to verify the Mi account credentials. I don't have an OS installed. So this won't work. Thanks for the suggestion though!

Twomby said:
Unfortunately, this is not true. I have downloaded an old version of Mi Unlock (2.2.406.5), which is supposed to work with Fastboot mode. The result is "Couldn't unlock --> Please download the latest version". And the latest version needs to access the OS to verify the Mi account credentials. I don't have an OS installed. So this won't work. Thanks for the suggestion though!
Click to expand...
Click to collapse
Hello @Twomby did you managed to get it working it the end?

Same issue here
Hi,
I am encouraging the same issue. Does someone found a solution to this?

tago4ever said:
Hi,
I am encouraging the same issue. Does someone found a solution to this?
Click to expand...
Click to collapse
I came across this Mi8 thread, not sure if it's possible on the Mi9, but he seems to have been able to flash it through EDL mode, you might ask him the question: https://xiaomi.eu/community/threads/mi-8-bricked-from-nowhere.55723/#post-543605
There's also this Mi9 thread: https://forum.xda-developers.com/Mi-9/how-to/unbrick-mi9-bootloader-locked-destroyed-t3924966

cannot enter fastboot mode

Hi, there.
I need help, please .
I cannot enter fastboot mode in realme x2 pro CN ver.
Does anyone have the same thing ?
I tried the following 2 .
Press and hold volume up + power button*
adb reboot fastbootloader
Fastboot screen will be displayed for a moment, but normal reboot will be done immediately.

nabetch17 said:
Hi, there.
I need help, please .
I cannot enter fastboot mode in realme x2 pro CN ver.
Does anyone have the same thing ?
I tried the following 2 .
Press and hold volume up + power button*
adb reboot fastbootloader
Fastboot screen will be displayed for a moment, but normal reboot will be done immediately.
Click to expand...
Click to collapse
Lol you need the bootloader unlocked i thing, and for enter press and hold vol- and power
Enviado desde mi RMX1931 mediante Tapatalk

Sergiocubano1 said:
Lol you need the bootloader unlocked i thing, and for enter press and hold vol- and power
Enviado desde mi RMX1931 mediante Tapatalk
Click to expand...
Click to collapse
That's honestly one of the most useless answers I've read here.
To even be able to unlock the bootloader, you HAVE TO enter the fastboot mode and he cannot. So what you'r saying doesn't make any sense. Like at all.
I do have the same btw and I'm running out of ideas, so if anyone actually has something helpful to say I'd be very thankful.
Neither the button combo nor the adb reboot bootloader does work. I can see the fastboot screen for like half a second and then it reboots normally without even touching the device.
Edit: I just found a way to enter fastboot on my realme X2 Pro.
You have to click on "Start in depth test" on the official Realme App, which can be found here: https://c.realme.com/in/post-detail...64863306907648&subForumId=1197159778845982720
I totally forgot the last setp before actually unlocking the bootloader..

Root after relocking bootloader
Hi, after having relocking bootloader the root is it keep and is it possible to continue to use rooted applications ? Thank's !

Idou77 said:
Hi, after having relocking bootloader the root is it keep and is it possible to continue to use rooted applications ? Thank's !
Click to expand...
Click to collapse
No, and before relocking bootloader, if your not "completely stock", you can brick your device.

lutherkingmartin said:
No, and before relocking bootloader, if your not "completely stock", you can brick your device.
Click to expand...
Click to collapse
Thank you for your answer. Is it true that unlocking the bootloader causes problems with the camera and the fingerprint sensor ?

In my case, only problem with FP, camera was ok.

lutherkingmartin said:
In my case, only problem with FP, camera was ok.
Click to expand...
Click to collapse
Ok thank you again for all those informations ?

..

i stuck in recovery mode bootloop but my device cannot go to recovery ,, after 3 seconds it continue to off and on again ,, cannot go to fastboot mode too..
i using vol - + and power button ,,, the device detected as MTKXXXX ,,, my device is realme 3 ,,
after detected cannot send command with: adb
or fastboot ,, are you have any solution?

I can't enter fastboot in realme x2
Hiii there
I can't enter fastboot in realme x2 it just shows for 2 to 3 sec them reboot normal
What to do
I need help
Help me out
Thanks

Same problem here, i see the bootloader screen for a split second before it boots into RUI all by itself. It's so annoying.

nabetch17 said:
Hi, there.
I need help, please .
I cannot enter fastboot mode in realme x2 pro CN ver.
Does anyone have the same thing ?
I tried the following 2 .
Press and hold volume up + power button*
adb reboot fastbootloader
Fastboot screen will be displayed for a moment, but normal reboot will be done immediately.
Click to expand...
Click to collapse
Same problem here, only on Global version.
RMX1931EX_11_C.36
Security update 5 March 2021

peter0010 said:
That's honestly one of the most useless answers I've read here.
To even be able to unlock the bootloader, you HAVE TO enter the fastboot mode and he cannot. So what you'r saying doesn't make any sense. Like at all.
I do have the same btw and I'm running out of ideas, so if anyone actually has something helpful to say I'd be very thankful.
Neither the button combo nor the adb reboot bootloader does work. I can see the fastboot screen for like half a second and then it reboots normally without even touching the device.
Edit: I just found a way to enter fastboot on my realme X2 Pro.
You have to click on "Start in depth test" on the official Realme App, which can be found here: https://c.realme.com/in/post-detail...64863306907648&subForumId=1197159778845982720
I totally forgot the last setp before actually unlocking the bootloader..
Click to expand...
Click to collapse
I did install the testing app and i'm still having that issue where i only see the fastboot for a split second before the device reboots itself. What am i doing wrong? I also enabled developer mode - OEM unlock - USB debug.
I've flashed my device before and i've even been able to unbrick my own device after "destroying" boot image, but this is something new and it's coming from Realme and i don't appreciate it!
I'm actually looking to replace my device with something more flash friendly, what would you recommend as a good budget device to De-Googlefy?

Hey guys..I am facing the same issue. I cannot get into Fastboot mode using the key combination or adb method. With the ADB method and the unlock tool the phone reboots with fastboot written with some chinese characters for a split second and then boots up as normal.
Has anyone found any solutions?
I am on the 5th March 2021 security update.

I also suffer from the same problem, When I want to go to Fastboot, a logo comes for 2/3 seconds and then the system is rebooted.

I am also facing the same issue. Any Help?

Same here.

Milan-XDA said:
Same problem here, i see the bootloader screen for a split second before it boots into RUI all by itself. It's so annoying.
Click to expand...
Click to collapse
Same on my device, looking for a solution if there is.

Is there room for me?

Question Help Qualcomm CrashDump Mode NE2213

Hello forum team,
I have a OnePlus 10 Pro with NE2213 version.
I have follow this thread successfully https://forum.xda-developers.com/t/guide-install-twrp-root-install-magisk-bypass-safetynet.4533511/
and this thread "How to Remove Orange State Warning on OnePlus Android 13" with no success
Now i'm on the Qualcomm Crashdump mode, with no access to bootloader or twrp. How to acess to flash an other rom or reset that?
Thanks you for your help

Never trust droidwin.com. In the current situation there is no way to fix this. I think RMA is the only option.

Did a quick google and it looks like you used the OP9 method on OP10... oof. The second link on google was the XDA page in the OP9 forums, and yeah that first link is super suspect since they don't even list model number. Sucks.
Most likely stuck with RMA or MSM as only options, you can attempt to boot into the other slot but I'm not sure if that file is persistent between the two.

DD228 said:
Hello forum team,
I have a OnePlus 10 Pro with NE2213 version.
I have follow this thread successfully https://forum.xda-developers.com/t/guide-install-twrp-root-install-magisk-bypass-safetynet.4533511/
and this thread "How to Remove Orange State Warning on OnePlus Android 13" with no success
Now i'm on the Qualcomm Crashdump mode, with no access to bootloader or twrp. How to acess to flash an other rom or reset that?
Thanks you for your help
Click to expand...
Click to collapse
Qualcomm Crashdump is that you are wrong slot ... You still should have fastboot. Just hold the power button and down volume it will reboot to fastboot ... then use this command " fastboot getvar current-slot " after that use this command to change slots " fastboot set_active other "

Or ... when you get back to fastboot flash twrp to both slots ... just dont panic...like some have and tried to load boot. img and bricked there phones
Stuck in bootloop after trying to flash Oxygen OS 13 coming from ColourOS 13
I have a Chinese Oneplus 10 Pro which I received with ColorOS 12.1 Android 12 NE2210_11_A_07. It then updated OTA with ColourOS 13 .x but the Google Assistant ("Hey Google!") functionality was not working. So then I tried to flash a global rom to...
forum.xda-developers.com

Thanks you for your response Canuck and link to post, i try that tomorrow in France to obtain twrp again.
When you say "just dont panic...like some have and tried to load boot. img and bricked there phones" if i have access to twrp again what do i do? usually I will load original boot image? Or or I have to check between slot?

DD228 said:
Thanks you for your response Canuck and link to post, i try that tomorrow in France to obtain twrp again.
When you say "just dont panic...like some have and tried to load boot. img and bricked there phones" if i have access to twrp again what do i do? usually I will load original boot image? Or or I have to check between slot?
Click to expand...
Click to collapse
Try to switch slots first...and reboot...I been there many times...LOL

Ok it's clear thanks
But now, i can't obtain an other thing than Qualcomm crashdump mode, when i make power button and volume bottom since phone off...
And when i keep my phone off it's reboot on the same screen

DD228 said:
Ok it's clear thanks
But now, i can't obtain an other thing than Qualcomm crashdump mode, when i make power button and volume bottom since phone off...
And when i keep my phone off it's reboot on the same screen
Click to expand...
Click to collapse
when it powers off...just hold the power button and the volume down see if it boot in to fastboot

Nothing when i make that, vibration + black screen 10 seconds and Qualcomm Crashdump Mode After

DD228 said:
Nothing when i make that, vibration + black screen 10 seconds and Qualcomm Crashdump Mode After
Click to expand...
Click to collapse
I just put my phone in Qualcomm dump mode...while you are in Qualcomm dump mode....hold the power button and volume down button...it will put you to fastboot...?

I think it go into Qualcomm dump mode because there is nothing on that slot..."not sure" but you need to get to fastboot...can't do anything without fastboot

DD228 said:
Hello forum team,
I have a OnePlus 10 Pro with NE2213 version.
I have follow this thread successfully https://forum.xda-developers.com/t/guide-install-twrp-root-install-magisk-bypass-safetynet.4533511/
and this thread "How to Remove Orange State Warning on OnePlus Android 13" with no success
Now i'm on the Qualcomm Crashdump mode, with no access to bootloader or twrp. How to acess to flash an other rom or reset that?
Thanks you for your help
Click to expand...
Click to collapse
What method did you try to use exactly to remove the orange warning?

Canuck Knarf said:
I think it go into Qualcomm dump mode because there is nothing on that slot..."not sure" but you need to get to fastboot...can't do anything without fastboot
Click to expand...
Click to collapse
Yes it's possible!
TheNewHEROBRINE said:
What method did you try to use exactly to remove the orange warning?
Click to expand...
Click to collapse
I have try this method
How to Remove Orange State Warning on OnePlus Android 13
In this guide, we will show you various methods to remove the Orange State Warning on your OnePlus device running Android 13/OxygenOS 13.
www.droidwin.com
But with extract of payload.bin of OnePlus 10 Pro NE2213, Android 13 image on slot A

DD228 said:
Yes it's possible!
I have try this method
How to Remove Orange State Warning on OnePlus Android 13
In this guide, we will show you various methods to remove the Orange State Warning on your OnePlus device running Android 13/OxygenOS 13.
www.droidwin.com
But with extract of payload.bin of OnePlus 10 Pro NE2213, Android 13 image on slot A
Click to expand...
Click to collapse
You did this cause you don't like the Orange state...!!!! Buds thats for oneplus 9 pro ...no where did I see it for 10 pro...
What method did you try...LOL . Method 1 , 2 , 3 , or 4

Look at my pic in my Avatar...says it all

Question IDK Redmi 10S

Hi there.
I wanted to root a Redmi 10S device. Bootloader was also opened. The flash went during fastboot mode, then after the fastboot reboot command, the device restarted, but it only shows "Redmi" and the word android at the bottom. I tried to access recovery and fastboot mode, but powr+volD only restarts the device and only the Redmi inscription is visible.
I don't know what they call this state in which the device is.
If there is a suitable link on the forum, I would appreciate it.

Hi there!
What did you flash excatly?
I mean, did you flash the whole phone, or just a patched boot image?

Andris85 said:
Hi there.
I wanted to root a Redmi 10S device. Bootloader was also opened. The flash went during fastboot mode, then after the fastboot reboot command, the device restarted, but it only shows "Redmi" and the word android at the bottom. I tried to access recovery and fastboot mode, but powr+volD only restarts the device and only the Redmi inscription is visible.
I don't know what they call this state in which the device is.
If there is a suitable link on the forum, I would appreciate it.
Click to expand...
Click to collapse
reflash stock and done to enter in fastboot mode press power and volD keep presing volD until the phone start in fastboot mode and flash it

gurtnyi said:
Hi there!
What did you flash excatly?
I mean, did you flash the whole phone, or just a patched boot image?
Click to expand...
Click to collapse
Just the boot.ini. but I think this would make fastboot mode work. But it's not working

tutibreaker said:
reflash stock and done to enter in fastboot mode press power and volD keep presing volD until the phone start in fastboot mode and flash it
Click to expand...
Click to collapse
What should I use to reflash? Mi flash? This is the NS

Yes... I probably mixed up the boot file in the downloads folder and not the correct received flash
Click to expand...
Click to collapse
Then, you don't have to flash the whole phone again, just flash back the original image, and try rooting with twrp and magisk zip file (rename the apk file from magisk.apk to magisk.zip, and then flash it in twrp)
If you can't install twrp, or something went wrong, take a full backup from your phone (like using google's backup service, and Miui backup--> it 'll save the backup to internal storage/miui/backup/AllBackup) and then ypu can reflash the phone with mi flash tool, but don't lock the bootloader back, and after flash, you shuold enable oem unlock in developer settings.
One quick question:
Did you enable oem unlocking in developer settings, before trying to flash the modified image?

gurtnyi said:
Then, you don't have to flash the whole phone again, just flash back the original image, and try rooting with twrp and magisk zip file (rename the apk file from magisk.apk to magisk.zip, and then flash it in twrp)
If you can't install twrp, or something went wrong, take a full backup from your phone (like using google's backup service, and Miui backup--> it 'll save the backup to internal storage/miui/backup/AllBackup) and then ypu can reflash the phone with mi flash tool, but don't lock the bootloader back, and after flash, you shuold enable oem unlock in developer settings.
One quick question:
Did you enable oem unlocking in developer settings, before trying to flash the modified image?
Click to expand...
Click to collapse
yepp, enable oem unlock. But fastbootmode is required for all operations. But fastboot mode doesn't work.

What do you mean it doesn't work?
Can't enter into fastboot mode?

gurtnyi said:
What do you mean it doesn't work?
Can't enter into fastboot mode?
Click to expand...
Click to collapse
Can't enter fastboot mode. The device only shows "Redmi" lettering. If fatboot worked, I could have done it already. power+volume down, the device just restarts and shows "redmi".

Hmm..
And if you holding the volD and power buttons together for a longer time?
Like a min, or sth
I had a similar situation, but after a few tries it went into fastboot mode

gurtnyi said:
Hmm..
And if you holding the volD and power buttons together for a longer time?
Like a min, or sth
I had a similar situation, but after a few tries it went into fastboot mode
Click to expand...
Click to collapse
it just restarts, as long as I press and hold volume down+power, if I don't press it, it just shows the redmi text

I apologise, but I 've currently ran out of ideas. If I can find any solution, I 'll post an answer about it.

gurtnyi said:
I apologise, but I 've currently ran out of ideas. If I can find any solution, I 'll post an answer about it.
Click to expand...
Click to collapse
TXH

Hi there the forgive my on my bad english and text.
The Only thing u can do is restoring the firmware by using brom mode, Look it up or follow the steps i'll give u....
First keep in mind brom works best Without the batary conected . So remove the thin cover plate at the back u can loosen it with heat , after removing the cover move all screws and remove the housing so u can disconect the batary at the mainboard .
Next u will have to install the Vcom drivers according your chipset mediatek etc.
For the Vcom drivers and install of it u can follow https://www.hovatek.com/forum/thread-16640.html
U must download or allready have a firmware file in fastboot format , Open up SP Flash tool and go to optionsd and select connection, click the w/o battery option and close it. Open your scatter file and than click on download . Insert your phone wile holding your volume down or up , with my device a redmi note 10s it was the up and down to getter for it was flashing the rom. this should flash your device back with a working fastboot and working rom.
Hope u will succeed...
Greetsss

Pegelaar_NL said:
Hi there the forgive my on my bad english and text.
The Only thing u can do is restoring the firmware by using brom mode, Look it up or follow the steps i'll give u....
First keep in mind brom works best Without the batary conected . So remove the thin cover plate at the back u can loosen it with heat , after removing the cover move all screws and remove the housing so u can disconect the batary at the mainboard .
Next u will have to install the Vcom drivers according your chipset mediatek etc.
For the Vcom drivers and install of it u can follow https://www.hovatek.com/forum/thread-16640.html
U must download or allready have a firmware file in fastboot format , Open up SP Flash tool and go to optionsd and select connection, click the w/o battery option and close it. Open your scatter file and than click on download . Insert your phone wile holding your volume down or up , with my device a redmi note 10s it was the up and down to getter for it was flashing the rom. this should flash your device back with a working fastboot and working rom.
Hope u will succeed...
Greetsss
Click to expand...
Click to collapse
Yep, this guy here 's got the point. If you can't flash with sp flash tool because auth fail, there's a method to bypass it.
You can find the tutorial here: https://www.getdroidtips.com/bypass-mediateks-sp-flash-tool-authentication-protection/
I also got some help from this guy's post, many thanks to him too.
https://forum.xda-developers.com/t/...ad_da_fail-0x7d4-2004-for-mtk-phones.3692259/
Let us know how it's going with it! ;D

I can unbrick the device at any time. There is another problem. An incorrect boot file is probably being copied. After TWRP you will never enter android again. But TWRP also only loads up to the subtitle. I tried a lot of methods. Now I will try google p ex. android and make it root.
But, if someone can recommend a device intended for gaming, but easy to root, then I will buy one

Andris85 said:
I can unbrick the device at any time. There is another problem. An incorrect boot file is probably being copied. After TWRP you will never enter android again. But TWRP also only loads up to the subtitle. I tried a lot of methods. Now I will try google p ex. android and make it root.
But, if someone can recommend a device intended for gaming, but easy to root, then I will buytoday there is a lot of devices for gaming like rog phone and red magic
Click to expand...
Click to collapse
today there is a lot of devices for gaming like rog phone and red magic, but is you are looking for a "gaming phone" in low or mid-range you are just wasting your money

Andris85 said:
I can unbrick the device at any time. There is another problem. An incorrect boot file is probably being copied. After TWRP you will never enter android again. But TWRP also only loads up to the subtitle. I tried a lot of methods. Now I will try google p ex. android and make it root.
But, if someone can recommend a device intended for gaming, but easy to root, then I will buy one
Click to expand...
Click to collapse
There's a tutorial, that helped me installing twrp correctly to this phone, I'll link my post about this.
https://forum.xda-developers.com/t/twrp-on-android-12.4522273/

tutibreaker said:
today there is a lot of devices for gaming like rog phone and red magic, but is you are looking for a "gaming phone" in low or mid-range you are just wasting your money
Click to expand...
Click to collapse
If you can root it easily, then the expensive one is good for me! Normal root was not available for typical gamer phones for years. If I buy something for which root may not be available, then I'm wasting my money...

gurtnyi said:
There's a tutorial, that helped me installing twrp correctly to this phone, I'll link my post about this.
https://forum.xda-developers.com/t/twrp-on-android-12.4522273/
Click to expand...
Click to collapse
I will look today