Database Develop

[ROM] [sailfish] [8.1] [LOS-based] **crDroid**OMS**v4.7 (10/12/18)

ROM thread text:
This is crDroid for 5" Pixel [sailfish]
crDroid Website: https://crdroid.net/
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features
Click for feature list (helps shorten the OP.)
Always Have a full functional Backup. Just in case!
DOWNLOAD ROM
Vendor image for current build - OPM4 July vendor image - DOWNLOAD VENDOR
GAPPS: For now, open gapps unofficial, also courtsey @razorloves - DOWNLOAD GAPPS
OpenGapps: Not Supported anymore, use @razorloves gapps.
First time installing crDroid to your Pixel, or coming from another ROM:
**NOTE** As you probably know by now, marlin and sailfish are weird. You must be on TWRP 3.2.0.0 to install this! 3.2.1.0 does not allow ROM installation. 3.2.0.0 does not encrypt properly, so you must remove your PIN/password before booting to and / or installing it. These installation instructions will assume you already know and have done that.
**NOTE** You are also able to use 3.2.1.-2 (3.2.0.0 or 3.2.1.-2)(Nothing in between)
** Make sure you're running a proper working Recovery (CWM or TWRP)
1) Copy crDroid zip, gapps zip & vendor img to your device
2) Boot into Recovery
3) Wipe cache, system, & data (or just cache & system for a dirty flash).
4) Flash ROM
5) Flash TWRP ***If you do not do this, you will lose TWRP!***
6) Reboot back into TWRP
7) Flash vendor image
7a) Mount vendor partition, navigate to vendor/overlay and delete that folder
8) Flash gapps
9) Boot up
For root, AFTER you boot into the ROM, you can go back to recovery and install Magisk 16.2
If you like music like I do and want to make it better, see post #3 for instructions on installing ViPER4Android.
Instructional Video
I Apologize about video quality, but this will help get you an idea of the steps involved.
Steps are the same for Marlin and Sailfish. Use corresponding files for device.
https://youtu.be/mmxIrp7BiRk
Upgrading from earlier version of crDroid:
The only difference between clean flash as above and upgrading is you just wipe system & cache, leaving data. Everything else is the same. ***Remember to always clean flash before reporting problems. Clean flashing is always the best method of ROM install.
KNOWN ISSUES
None that stand out, If you find something that is consistently reproducible, do so and pull a log. Without logs, we cannot fix the bugs. Please report any that you run into, assuming you have tested on a clean install. :good:
NOTE ON SUBSTRATUM
We currently do not have substratum commits in the ROM because they have not updated their repos on git for Oreo. As such, if you want to use Substratum, you will be doing so by allowing root and using legacy mode. you -must- make sure whatever theme you try supports 8.1. Even some that say they support Oreo may only work with 8.0, not 8.1. I'd recommend the following:
Suggestion: whenever installing themes, remove your pin/password so you can get TWRP to mount data.
If you get in a FC/bootloop situation, boot to TWRP, mount data and remove the file /data/system/overlays.xml.
That should allow you to boot and uninstall the overlays without reinstalling anything.
Don't expect any support if you:
- are not running the included kernel
- have installed any mods such as Xposed!
- have modified system files
Thanks to:
- @razorloves - Without his device tree and kernel bringup to work from, crDroid for marlin & sailfish would not be possible at all. Apart from the ROM development itself (for which @neobuddy89 bears the largest burden, in addition to the great developers of LineageOS itself), credit for this ROM being able to even build goes to razorloves.
- Google
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
DONATE
crDroid G+ community​
Source Code:
Device tree: https://github.com/razorloves/android_device_google_marlin
Kernel tree: https://github.com/razorloves/android_kernel_google_marlin
Vendor tree: https://github.com/razorloves/proprietary_vendor_google
Credit for all of those trees goes to @razorloves , without whose work crDroid for marlin would be a shell of itself!
XDA:DevDB Information
[ROM] [sailfish] [8.1] [LOS-based] **crDroid**v4.7, ROM for the Google Pixel
Contributors
hokiealumnus, neobuddy89, BHermes21, The rest of the crDroid team
Source Code: https://github.com/crdroidandroid/
ROM OS Version: 8.x Oreo
Based On: LineageOS
Version Information
Status: Nightly
Current Stable Version: v4.0
Stable Release Date: 2018-03-23
Beta Release Date: 2018-01-19
Created 2018-01-20
Last Updated 2018-10-12

I already said it in my post above, but feel it needs repeating. HUGE thanks to @razorloves , without whose marlin bring-up this ROM would still not be built.
Also thanks to @almightysiman for confirming the ROM functions on sailfish.
Side note: You won't find BETA2 for sailfish. I skipped it so sailfish & marlin were on the same version number.

*** NOTE - We cannot actively support audio (or any other) mods. I'm posting this because it works for me and I use it personally. This is not supported by our ROM team. Only the ROM / vendor / gapps and nothing else is supported by the crDroid development team. ***
If you like music as much as I do and prefer to use Viper4Android, install it as follows:
0) This requires Magisk; install Magisk 15.x (whatever is most recent)
1) Using a root explorer (I prefer FX File Explorer), navigate to /system/system/priv-app/AudioFX and rename AudioFX.apk to AudioFX.BAK. Reboot.
2) Install three Magisk modules:
a) Magisk SELinux Permissive Script (Get it here: https://forum.xda-developers.com/apps/magisk/module-magisk-selinux-permissive-script-t3577549)
b) Busybox for Android NDK v1.27.2 by osm0sis (Get it from Magisk downloads in the Magisk app)
c) ViPER4Android FX v2.8 by ahrion, zackptg5 (Also from Magisk downloads)
3) Reboot.
4) Enjoy your better music!

Awesome! :fingers-crossed:

Does this rom have always on display? Didn't see it in the features list

Thanks to all involved who had a part in creating this ROM...

Sorry to be that guy but could someone briefly explain step 7a for me ? I've only flash one Rom so far on my pixel and it did not go smoothly to say the least...

bluedog220 said:
Sorry to be that guy but could someone briefly explain step 7a for me ? I've only flash one Rom so far on my pixel and it did not go smoothly to say the least...
Click to expand...
Click to collapse
You have to mount vendor (TWRP/Mount/Vendor, back), then go to Advanced / file manager/ navigate to /vendor/overlay. Choose delete, swipe right.

Gotta say, this is, so far, the perfect flashing experience in Oreo ROMs. I had no force-closes at setup, and no issues with the flashing process. So far, it has been great. Gonna use it for a few days, but as of now, this looks like my daily driver. Thanks again for this!

Does inlimited original quality photos work? Some ROMs I've noticed it doesn't work

shagbag913 said:
Does inlimited original quality photos work? Some ROMs I've noticed it doesn't work
Click to expand...
Click to collapse
We good! Working on mine.

stompysan said:
We good! Working on mine.
Click to expand...
Click to collapse
Thanks for checking! Sounds like this is going on my pixel

is this supposed to have the stock boot animation or did i screw something up?

shagbag913 said:
is this supposed to have the stock boot animation or did i screw something up?
Click to expand...
Click to collapse
Yep, stock boot animation, at least for now.

Are GAPPS required to avoid problems? FC's bootloops etc. Just wondering cause I don't run gapps anymore and know that some of our oreo roms need GAPPS to function properly

jacobas92 said:
Are GAPPS required to avoid problems? FC's bootloops etc. Just wondering cause I don't run gapps anymore and know that some of our oreo roms need GAPPS to function properly
Click to expand...
Click to collapse
No clue, never tried. That's like running half a ROM for me. You're welcome to try though. Please report back if you do.

Hello somehow started on the dark interface when I used the dark wallpaper nothing changed ?

pepa 77 said:
Hello somehow started on the dark interface when I used the dark wallpaper nothing changed ?
Click to expand...
Click to collapse
Did you delete the overlay folder from vendor?
The dark theme auto switcher was disabled by our Dev. It was causing issues. I'm not surprised it didn't switch for you, but definitely am surprised it was enabled at all.

hokiealumnus said:
Did you delete the overlay folder from vendor?
The dark theme auto switcher was disabled by our Dev. It was causing issues. I'm not surprised it didn't switch for you, but definitely am surprised it was enabled at all.
Click to expand...
Click to collapse
Thanks for clarifying the thing, this is a great Rom Congratulations.?

Really nice for a beta ?
Sent from my Pixel using XDA-Developers Legacy app

[ROM][9.0][OFFICIAL] CRDroidAndroid [wayne /MI 6X]

crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features
Click for feature list (helps shorten the OP.)
Always Have a full functional Backup. Just in case!
DOWNLOAD ROM
GAPPS: DOWNLOAD GAPPS
First time installing crDroid to your Mi 6X, or coming from another ROM:
** Make sure you're running a proper working Recovery (CWM or TWRP)
Flashing instructions:
1. Boot into twrp copy ZIPs to device and flash ROM
Flash Gapps
Reboot, and wait for booting. It takes ~3 minutes
For root, AFTER you boot into the ROM, you can go back to recovery and install Magisk XX.x (whatever is most recent).
Upgrading from earlier version of crDroid:
The only difference between clean flash as above and upgrading is you just wipe system & cache, leaving data. Everything else is the same. ***Remember to always clean flash before reporting problems. Clean flashing is always the best method of ROM install.
KNOWN ISSUES
Don't expect any support if you:
- are not running the included kernel
- have installed any mods such as Xposed!
- have modified system files
Thanks to:
- Google
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
DONATE
crDroid G+ community​

need wait 30 minutes until ill ill push to cr github

Super, awesome !

Thank you, I will be trying this out later today.
Cheers

WTF ru building for Wayne？ LOL
Sent from my MI 6X using Tapatalk

@coderzs So far so good, really nice rom, thanks!
1. Is there a hold back to kill app option somewhere?
2. There is no privacy guard?
Thanks

awesome, great job bro

Do I have to wipe data, cache, system & dalvic?

wow its official!

screencast issue
Good build, but the screencast does not work, the device reboots the shell. Is there a chance of correction?

Hei Man yesterday Im install some kernel mod .
and i wanna update new build . can i flash it without clean internal and data ?

best rom in term of stability for gaming looking forward for the next build!
edit: Update is out! and its great as usual. thanks dev

coderzs said:
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them!
Features
Click for feature list (helps shorten the OP.)
Always Have a full functional Backup. Just in case!
DOWNLOAD ROM
GAPPS: DOWNLOAD GAPPS
First time installing crDroid to your Mi 6X, or coming from another ROM:
** Make sure you're running a proper working Recovery (CWM or TWRP)
Flashing instructions:
1. Boot into twrp copy ZIPs to device and flash ROM
Flash Gapps
Reboot, and wait for booting. It takes ~3 minutes
For root, AFTER you boot into the ROM, you can go back to recovery and install Magisk XX.x (whatever is most recent).
Upgrading from earlier version of crDroid:
The only difference between clean flash as above and upgrading is you just wipe system & cache, leaving data. Everything else is the same. ***Remember to always clean flash before reporting problems. Clean flashing is always the best method of ROM install.
KNOWN ISSUES
Don't expect any support if you:
- are not running the included kernel
- have installed any mods such as Xposed!
- have modified system files
Thanks to:
- Google
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
DONATE
crDroid G+ community​
Click to expand...
Click to collapse
Thanks for dev this rom.
I have a question, how can I make version 6 of google camera work? It seems that the following properties must be activated in addition to the typical HAL3 and EIS.
Code:
persist.vendor.camera.HAL3.enabled=1
Code:
persist.camera.stats.test=5
Code:
persist.vendor.camera.stats.test=5
But when I do the modification the build.prop is not read. How can I make it work?
Ty.

syncstar32 said:
Thanks for dev this rom.
I have a question, how can I make version 6 of google camera work? It seems that the following properties must be activated in addition to the typical HAL3 and EIS.
But when I do the modification the build.prop is not read. How can I make it work?
Ty.
Click to expand...
Click to collapse
Flash PitchBlack Recovery, and from extra settings menu hit Camera2APi. Flash your TWRP img again if want back your old recovery.

A.Zain.A said:
Flash PitchBlack Recovery, and from extra settings menu hit Camera2APi. Flash your TWRP img again if want back your old recovery.
Click to expand...
Click to collapse
Or just turn cam2api-switch on. It can be found from settings -> xiaomi parts. :silly:
Theres no need to flash anything or edit any lines in build.prop.
Btw just flashed latest wayne crdroid over latest jasmine version and it seems to be smoother and performing better in benchmarks.

coderzs said:
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them!
Features
Click for feature list (helps shorten the OP.)
Always Have a full functional Backup. Just in case!
DOWNLOAD ROM
GAPPS: DOWNLOAD GAPPS
First time installing crDroid to your Mi 6X, or coming from another ROM:
** Make sure you're running a proper working Recovery (CWM or TWRP)
Flashing instructions:
1. Boot into twrp copy ZIPs to device and flash ROM
Flash Gapps
Reboot, and wait for booting. It takes ~3 minutes
For root, AFTER you boot into the ROM, you can go back to recovery and install Magisk XX.x (whatever is most recent).
Upgrading from earlier version of crDroid:
The only difference between clean flash as above and upgrading is you just wipe system & cache, leaving data. Everything else is the same. ***Remember to always clean flash before reporting problems. Clean flashing is always the best method of ROM install.
KNOWN ISSUES
Don't expect any support if you:
- are not running the included kernel
- have installed any mods such as Xposed!
- have modified system files
Thanks to:
- Google
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
DONATE
crDroid G+ community​
Click to expand...
Click to collapse
I saw an update for January 21, 2019. When I wanted to download the file at Mega.nz, it ask for a decryption key to download the file. I hope you can share the decryption key, because I like this ROM.
many thanks for great rom.

not sure whats causing it but i feel like the new build is getting a lot of stutter while gaming (pubg) compared to december build

I did not mean to activate camera2api. I mean to use a mod of version 6 of the google camera, 90% of these fail, no apk installs. it says "App not installed"
Do you use gcam v6?

syncstar32 said:
I did not mean to activate camera2api. I mean to use a mod of version 6 of the google camera, 90% of these fail, no apk installs. it says "App not installed"
Do you use gcam v6?
Click to expand...
Click to collapse
Check in settings/xiaomi part

I want to ask ,, crd suport subsratum right ... But
If i apply theme and still nothing change why ??

[ROM+KERNEL][UNOFFICIAL][Q][BETA][EAS/F2FS] A I C P 15.0 (NEW BUILD - 12/04/20)

NEW!! - April build release post here - https://forum.xda-developers.com/showpost.php?p=82365485&postcount=132
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP and we are now based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
If there are any bugs, either we will sort them out or the GZOSP team, if it concerns their code base. This ROM isn't GZOSP supported, so there is no need to report errors/bugs to them!!
Android 10 is now Pure AOSP! For our pleasure. :victory:
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@Maxwen and the rest of the OmniRom team
DU team
SlimRoms team
Resurrection Remix team
Community
...
@LorD ClockaN
@zipsnet
@eyosen
@semdoc
@SpiritCroc
@wartomato
@eboye
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build nightlies/weeklies and everything that comes with it, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Beta Release: Version 15.0
Download link: HERE!!
Clicking Thanks button below this post will show appreciation for the upkeep of these files.
Google Apps:
ALREADY INCLUDED!
Full Changelog link: https://dwnld.aicp-rom.com/
(Just click the changelog button next to the download link in the list of builds available for your device)
CRT Animation causes soft-reboot (just don't use it)
In-call Volume stuck on high currently.
Bluetooth occasionally causes a forced reboot.
...You tell...
FAQ:
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page. <<< This way is the easiest!
The ROM should contain everything you need to enjoy Android 10. You don't need to install any Add-on's, simply download the latest ROM, flash it and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM zip. We recommend Magisk!
It is STRONGLY recommended to fully wipe your device before flashing if you're coming from a different ROM and please avoid restoring system apps and system data with Titanium Backup as this can cause stability issues that are very hard to debug. Once you're on AICP you can dirty flash new builds without wiping anything, unless stated otherwise!
-----
How to flash for the first time:
(Again: Don't do it if you don't know it!)
If you've got everything nice and backed up:
1. Fastboot -w (not usually necessary, this will wipe data and internal as well as format to ext4 and remove any encryption).
2. Fastboot flash boot "twrp boot.img". Use the F2FS TWRP image linked here - F2FS TWRP Boot). Reboot to recovery (on the phone).
3. In TWRP - wipe System, Data, and Dalvik. OR do a full wipe including Internal Storage, if you want to switch to F2FS and go Decrypted which is Recommended!). You'll have less hassle with dirty flashes later, but your phone may be less secure. Whichever way you look at it, its your decision!
[*]NOTE - Its recommended to format to F2FS file system at this stage before flashing ROM. However, not essential!
[*]Change filesystem: Go into Wipe > select Data > Change Filesystem > F2FS
(I believe encryption won't work if you switch to F2FS, so only do it if you're okay with that).
4. Transfer the ROM zip and the TWRP installer zip to your SDCARD.
5. Flash the ROM zip and the TWRP zip (FYI, flashing a ROM by any method will install to the opposite slot, the TWRP zip patches both slots).
6. Reboot to recovery (Reboot > Recovery), ignoring when it says "No OS Installed" (this will automatically switch slots for you).
7. Back in TWRP - transfer the latest Magisk zip to your SDCARD and flash it. (Magisk always installs to the current slot).
8. Reboot to system. It will fail to boot once because of Magisk, that's normal just let it do its thing.
9. Go through setup.
10. Enjoy the ROM!
NOTE: If coming from AICP Pie it's still recommended to make a FRESH START!
The ROM has GApps built in, so you don't need to flash them! There is no GAppless option.
-----
Currently supported Root Solution:
Magisk stable
If you want to contribute to AICP, or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
https://github.com/celtare21/kernel_essential_msm8998-1
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
Contributors:
CamoGeko (Me)
KuranKaname (DaBoss)
All you PH-1 guys! (for testing and using the fastest/smoothest ROM on Essential Phone) - Thank you!
This ROM is free to use as everything should be on XDA, just click Thanks if you appreciate the work.
Happy 2020!!
Screenshots:
HERE!!
Theme - Valerie
Icons - Outline Icon Pack (find here on XDA!)
Launcher - Lawnchair Q pre-alpha + QuickSwitch 3.0.0
​
XDA:DevDB Information
Unofficial AICP 15 Q Beta, ROM for the Essential Phone
Contributors
CamoGeko, KuranKaname
Source Code: https://github.com/celtare21/kernel_essential_msm8998-1
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: N/A
Based On: Pure AOSP
Version Information
Status: Beta
Current Beta Version: 15.0
Beta Release Date: 2020-01-05
Created 2020-01-06
Last Updated 2020-04-23

YOUR MATA CUSTOMIZATION STATION!
-------
F2FS Boot (if you want to full wipe and convert to F2FS):
F2FS Boot image
TWRP Installer zip (to be flashed after flashing the ROM):
TWRP Installer
Latest NOVENDOR images:
Firmware Collection (Novendor)
Gcam that I use:
HyperCam_R6_Q_GAMMA
Launcher:
Lawnchair-q_pre_alpha_2599
Lawnfeed (needed for Google Now):
Lawnfeed-2.1-2598
QuickSwitch (for Recents):
QuickSwitch_(Android_Pie+)-v3.0.0(300)
avFonts by @Lupin The Third (Magisk modules):
Magisk system-wide fonts
Migrate v2.1 (to move your apps):
Migrate_Release_2.1
ViperFX:
ViperFX-V2.7.1.0 apk | | | v4afx_v2.7.1.0 zip
YouTube Vanced (Magisk module):
YouTube_Vanced_black_themed_-_Magisk_Repo-v14.21.54(b01.40.20)
---
Will add more later... have fun!!
Camo.

CamoGeko said:
FOR YOUR PLEASURE:
Gcam that I use:
HyperCam_R6_Q_GAMMA
Launcher:
Lawnchair-q_pre_alpha_2599
Lawnfeed (needed for Google Now):
Lawnfeed-2.1-2598
QuickSwitch (for Recents):
QuickSwitch_(Android_Pie+)-v3.0.0(300)
Migrate v2.1 (to move your apps):
Migrate_Release_2.1
Will add more later... have fun!!
Camo.
Click to expand...
Click to collapse
Thanx bro keep testing

This is the most put together ROM for the essential phone on Android 10 that I have found. Great job. I did see in the list of features that there is supposed to be a one-handed mode I can't seem to find that anywhere. Could someone point that out where to locate it? This ROM works seamlessly with Magisk 20.2 and Viper4Android intalls without having to do a weird workaround to get its drivers going. I do get a notication that my Bluetooth isn't functioning sometimes. I go into TWRP, clean the cache and reboot. The Bluetooth warning goes away and Bluetooth works fine.

Navigation is blank
The rom perfect but i open navigation on Aicp extras is blank. Thank you.

NICE!
Is the Custom Volume Steps feature implemented yet? Saw it on the app, but am not seeing it in the settings

silverkun146 said:
The rom perfect but i open navigation on Aicp extras is blank. Thank you.
Click to expand...
Click to collapse
Strange, it works perfectly fine for me here...
Can you screenshot?

Chinese people need gappless
---------- Post added at 05:04 AM ---------- Previous post was at 04:59 AM ----------
slimGK said:
Chinese people need gappless
Click to expand...
Click to collapse
GApp waste too much bettery and google can not use in china

Probably my fault
I will try flash

How to close the rounded corners around the screen

slimGK said:
Chinese people need gappless
---------- Post added at 05:04 AM ---------- Previous post was at 04:59 AM ----------
GApp waste too much bettery and google can not use in china
Click to expand...
Click to collapse
You can always build it yourself

The Screen Off Animation "CRT" (AICPExtras-Animations-Screen off Animation) causes a UI restart. When CRT is selected, each time I push the Power button, I get the boot animation and the start up loading.
Also, here'e the Nav screen pic

nijohnson said:
The Screen Off Animation "CRT" (AICPExtras-Animations-Screen off Animation) causes a UI restart. When CRT is selected, each time I push the Power button, I get the boot animation and the start up loading.
Also, here'e the Nav screen pic
Click to expand...
Click to collapse
Known issue about CRT, look under "Known Issues" in the OP. Its right there.
Thanks for the Navigation screenshot I hadn't seen that, because I have no need to go there.
Currently there are no options for Navigation within AICP Q right now it seems, but you dont really need them. Just go to System - Gestures and everything you need is there, if you want more customization then use a custom Launcher like the one from Post 2. Problem solved. :good:

Thanks! Sorry I missed the CRT known issue.

Thx for the wonderul ROM. One of the best I've ever tried.
I've found 2 issues only:
-Everything is very fluent until scrolling/swiping becomes very slow for moments (seconds). It just comes and goes. It can be noticed when you try to swipe/scroll on the launcher or the notifications panel.
-It happened to me today that after using the gcam you posted for a while (in night mode) at some point the phone started to reboot every time I tried to take a photo. This issue was persistent between reboots and regardless of the camera app being used. The funny thing is that the issue disappeared after a while and then it came back. So looks like the camera needs to "cool off" after taking several pictures in a row.. weird
Again, thanks for the great work

monstercamf said:
Thx for the wonderul ROM. One of the best I've ever tried.
I've found 2 issues only:
-Everything is very fluent until scrolling/swiping becomes very slow for moments (seconds). It just comes and goes. It can be noticed when you try to swipe/scroll on the launcher or the notifications panel.
-It happened to me today that after using the gcam you posted for a while (in night mode) at some point the phone started to reboot every time I tried to take a photo. This issue was persistent between reboots and regardless of the camera app being used. The funny thing is that the issue disappeared after a while and then it came back. So looks like the camera needs to "cool off" after taking several pictures in a row.. weird
Again, thanks for the great work
Click to expand...
Click to collapse
It happens to me as well. Thing is GCam takes a lot of processing power, it also happens on stock if you start taking pictures on low battery. Phone will just die. Don't know if something that can be fixed, could be a problem with GCam itself, or something in the kernel that messes **** up and makes the phone think that it has no battery.
Only fix I could find is using nonHDR photos when phone has 30% or less battery. Non HDR photos look terrible though.

feligoni said:
It happens to me as well. Thing is GCam takes a lot of processing power, it also happens on stock if you start taking pictures on low battery. Phone will just die. Don't know if something that can be fixed, could be a problem with GCam itself, or something in the kernel that messes **** up and makes the phone think that it has no battery.
Only fix I could find is using nonHDR photos when phone has 30% or less battery. Non HDR photos look terrible though.
Click to expand...
Click to collapse
Good to know. Thanks for the tip. However in my case I still had 70% of the battery left, but it could be that I was making a very intensive use of the phone because of the low light mode.. Very strange.

So far I have been liking the ROM a lot except for one big issue: whenever I install magisk, Wifi and Bluetooth are completely disabled. Reinstalling the ROM without it fixes the issue, but now I dont have a rooted phone. Any idea what I'm missing?

xeta8 said:
So far I have been liking the ROM a lot except for one big issue: whenever I install magisk, Wifi and Bluetooth are completely disabled. Reinstalling the ROM without it fixes the issue, but now I dont have a rooted phone. Any idea what I'm missing?
Click to expand...
Click to collapse
No problems here. What Magisk are you using? Stick to official releases.

feligoni said:
No problems here. What Magisk are you using? Stick to official releases.
Click to expand...
Click to collapse
I am trying to use the latest stable release which is v20.3
EDIT: I got it working. My mistake was assuming the twrp img I used when first installing the ROM was all I needed, and I did not use the TWRP installer zip from their website. Everything is working now after actually using the installer zip.

[ROM][11][OFFICIAL] lineage-18.1 for Pixel 3/XL (blueline/crosshatch)

lineage 18.1 is EOL for this device. 19.1 is now available:
https://forum.xda-developers.com/t/...rosshatch-android12-1-lineageos-19-1.4380097/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of android, which is designed to increase performance and reliability over stock android for your device.
All the source code for LineageOS is available in the LineageOS Github repo. If you would like to contribute to LineageOS, please visit our Wiki for more details.
Downloads:
pixel 3 - blueline: https://download.lineageos.org/blueline
pixel 3 xl - crosshatch: https://download.lineageos.org/crosshatch
gapps zip (arm64): (optional): https://wiki.lineageos.org/gapps.html
Google Fi addon: https://sourceforge.net/projects/ra...-gapps-addon-arm64-11.0-20210212.zip/download (if you're on Google Fi, install this zip right after installing gapps zip.)
Android Auto addon: https://sourceforge.net/projects/ra...-gapps-addon-arm64-11.0-20201121.zip/download (if you want android auto, install this after installing gapps zip. note: this is only needed with opengapps)
Initial Install Instructions:
https://wiki.lineageos.org/devices/blueline/install
https://wiki.lineageos.org/devices/crosshatch/install
Update Instructions:
https://wiki.lineageos.org/devices/blueline/update
https://wiki.lineageos.org/devices/crosshatch/update
Upgrade Instructions: (from 17.1 to 18.1)
https://wiki.lineageos.org/devices/blueline/upgrade
https://wiki.lineageos.org/devices/crosshatch/upgrade
Notes:
1. lineage-18.1 comes with adb root that you can enable in developer options, but if you want root for apps, you can grab the magisk apk and rename it to .zip and install it in lineage recovery.
An alternative install method is to follow these boot.img patching instructions. You can get the boot img directly from the lineage download site. It's labeled as the recovery img but it's actually the boot img.
2. The newest vendor, radio, & bootloader are included in the lineage rom zip, so no need to worry about updating those manually.
Known issues:
1. when you format data in lineage recovery, you might see "cant send spi message". you can ignore it.
2. there's an issue with sprint mobile data not working. we're looking into it. there's an easy workaround though. send me a pm and i'll walk you through it.
Changelog:
blueline
crosshatch
Bug reporting:
https://wiki.lineageos.org/bugreport-howto.html
Source Code:
crosshatch device tree: https://github.com/LineageOS/android_device_google_crosshatch/tree/lineage-18.1
blueline device tree: https://github.com/LineageOS/android_device_google_blueline/tree/lineage-18.1
kernel tree: https://github.com/LineageOS/android_kernel_google_msm-4.9/tree/lineage-18.1
vendor tree: https://github.com/TheMuppets/proprietary_vendor_google/tree/lineage-18.1
Credits:
Many thanks to my fellow LineageOS team members and all the contributors out there in the community.
Android version: 11
Kernel version: 4.9.248
Status: nightly

Lovely!

Beauty and the beast
Havent tried it but many thanks for the active development...

I loved this rom I hope it continues the development

Can I update to or dirty flash from lineage 17.1 to lineage 18 on pixel 3?

New build with November security patch level. :good:
blueline rom zip - https://androidfilehost.com/?fid=10763459528675579025
blueline boot img - https://androidfilehost.com/?fid=10763459528675579024
i still dont know if the crosshatch builds even work. no reports on it yet, so no new builds. waiting on you guys. lol
crosshatch rom zip - https://androidfilehost.com/?fid=10763459528675580134
crosshatch boot img - https://androidfilehost.com/?fid=10763459528675580133

On crosshatch alternate build it's working very smooth and incredible well for first build, so far the only problem it's that gaming heats faster than usual.

razorloves said:
New build with November security patch level. :good:
crosshatch - i still dont know if the crosshatch builds even work. no reports on it yet, so no new builds. waiting on you guys. lol
Click to expand...
Click to collapse
Thank you so much, it works fine on crosshatch, any updates are highly appreciated!
For me, it is an exclusion criteria if there is no root and no lineageos available for a device.
____
The only problem for me was to use the wrong version of Magisk ending up in a non booting device.
So if you update to lineage-18 and want to get root, you will want to take the canary version of magisk manager to patch the boot.img.

#Crosshatch
great to see the simplest rom available
it booted with the first link provided.
much obliged
I will use it and report my experience with it.
---------- Post added at 07:23 PM ---------- Previous post was at 07:21 PM ----------
beanaman said:
Can I update to or dirty flash from lineage 17.1 to lineage 18 on pixel 3?
Click to expand...
Click to collapse
its highly recommended to clean flash it since its in beta status

razorloves said:
New build with November security patch level. :good:
blueline rom zip - https://androidfilehost.com/?fid=10763459528675579025
blueline boot img - https://androidfilehost.com/?fid=10763459528675579024
crosshatch - i still dont know if the crosshatch builds even work. no reports on it yet, so no new builds. waiting on you guys. lol
Click to expand...
Click to collapse
What is the ADB command to flash gapps? I have only flashed ROMs with gapps included

Zehlek said:
What is the ADB command to flash gapps? I have only flashed ROMs with gapps included
Click to expand...
Click to collapse
Just side load the zip file for the gapps

razorloves said:
New build with November security patch level. :good:
blueline rom zip - https://androidfilehost.com/?fid=10763459528675579025
blueline boot img - https://androidfilehost.com/?fid=10763459528675579024
i still dont know if the crosshatch builds even work. no reports on it yet, so no new builds. waiting on you guys. lol
crosshatch rom zip - https://androidfilehost.com/?fid=10763459528675580134
crosshatch boot img - https://androidfilehost.com/?fid=10763459528675580133
Click to expand...
Click to collapse
Crosshatch boot img it won't boot, it will go straight to bootloader, know bugs so far lte status bar icons aren't present on Nov patch update

Thanks to Razor we have the opportunity to have LOS .
I'll try it after work ?

Can anyone confirm if Android Auto works with this? A lot of the Android 10 roms did not, and that was a huge deal breaker for me, as I use Android auto daily.

New builds with some changes and fixes.
blueline rom zip - https://androidfilehost.com/?fid=10763459528675581018
blueline boot img - https://androidfilehost.com/?fid=10763459528675581017
crosshatch rom zip - https://androidfilehost.com/?fid=10763459528675580705
crosshatch boot img - https://androidfilehost.com/?fid=10763459528675580704
significant changes:
added power menu options (advanced restart) - https://review.lineageos.org/q/topic:eleven-powermenu
added support for skipping tracks with remote control - https://review.lineageos.org/292052
fixed missing status bar icons on devices with a notch - https://review.lineageos.org/292038

lineage recovery won't boot.
Hi razorloves. Thanks for all your hard work. But I'm having serious issues booting into any lineage recovery (I've tried multiple nightly builds from 17.1 and multiple boot.img from this thread). All are failing. I do fastboot flash boot boot.img (I've also tried both boot_a and boot_b) but once i reboot it goes back into fastboot and give me an error with the boot img. Yet when I do htis with twrp-3.3.0-0-blueline.img i boot into twrp fine. (only issue there being that the zip files for lineage os fail to flash when installing from twrp. I've also tried with stock recovery and that give the same error as twrp).
I should also note that when i do fastboot boot boot.img the boot just hangs and never goes through.
Any suggestions?

tantonj said:
Hi razorloves. Thanks for all your hard work. But I'm having serious issues booting into any lineage recovery (I've tried multiple nightly builds from 17.1 and multiple boot.img from this thread). All are failing. I do fastboot flash boot boot.img (I've also tried both boot_a and boot_b) but once i reboot it goes back into fastboot and give me an error with the boot img. Yet when I do htis with twrp-3.3.0-0-blueline.img i boot into twrp fine. (only issue there being that the zip files for lineage os fail to flash when installing from twrp. I've also tried with stock recovery and that give the same error as twrp).
I should also note that when i do fastboot boot boot.img the boot just hangs and never goes through.
Any suggestions?
Click to expand...
Click to collapse
Razorloves contacted me directly and help me sort out the issue. My problem is I first needed to flash to the CORRECT stock rom. (I was using the oldest android 9 rom. for 17.1 I needed newest 10 rom, for this I needed newest 11 rom).
Thanks,

xFaultx said:
Can anyone confirm if Android Auto works with this? A lot of the Android 10 roms did not, and that was a huge deal breaker for me, as I use Android auto daily.
Click to expand...
Click to collapse
Android Auto is not working for me. Crashes immediately after opening. I attached a logcat that should contain three failures right in a row.

tantonj said:
Razorloves contacted me directly and help me sort out the issue. My problem is I first needed to flash to the CORRECT stock rom. (I was using the oldest android 9 rom. for 17.1 I needed newest 10 rom, for this I needed newest 11 rom).
Thanks,
Click to expand...
Click to collapse
Is this a step that everyone needs to follow when upgradeing from LineageOS 17.1 to 18, or only if your still on OEM?

beanaman said:
Can I update to or dirty flash from lineage 17.1 to lineage 18 on pixel 3?
Click to expand...
Click to collapse
the migration changes are still in-work, so something might go wrong if you don't wipe data. you can follow the progress here: https://review.lineageos.org/q/topic:"eleven-db-migration"
ktdt00 said:
Android Auto is not working for me. Crashes immediately after opening. I attached a logcat that should contain three failures right in a row.
Click to expand...
Click to collapse
thx for log. will look into it.
FeralG said:
Is this a step that everyone needs to follow when upgradeing from LineageOS 17.1 to 18, or only if your still on OEM?
Click to expand...
Click to collapse
only when you're on stock rom

General Deleted*

Deleted

thanks, i love crdroid

CrDroid is here! @gwolfu I'm coming as usual

Could've used the OSS vendors from Arrow, they're perfect for the deep sleep issues that almost all other ROMs have.

LeDiable said:
Could've used the OSS vendors from Arrow, they're perfect for the deep sleep issues that almost all other ROMs have.
Click to expand...
Click to collapse
You may see next build oss based <3, also there's no deep sleep issue in this rom.

lavishkumar said:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/11.0/README.mkdn
Flashing Instructions:
Pre-installation:
TWRP (Download from here)
gapps (Download from here)
Magisk 20.3 or newer for root (after first boot) - (Download from here)
First time installation:
Copy crDroid zip, gapps zip to your device
Boot into Recovery
Format Data
Flash ROM
Flash gapps (Optional)
Flash magisk (optional)
Reboot and Enjoy
Update installation:
Copy crDroid zip to your device
flash it via custom recovery
clean cache (optional)
Reboot
Sources:
ROM: https://github.com/crdroidandroid
Kernel: kernel url thanks grewal
Github: Lavish
Download:
ROM: https://crdroid.net/sweet
Changelog:
- Android June 2021 Security update
- Based on crDroid 7.7
- Merged latest changes from @grewal
- Updated fingerprint
- Adjusted AOD brightness
- Added burn in protection
- Enabled adaptive sleep
- Some performance tweaks to make UI smoother
Known issues:
- None
- If found any tell me
Support:
Telegram
Visit official website @ crDroid.net
crDroid Community Telegram
crDroid Updates Channel
Donate to help our team pay server costs
Screenshots:-
Click to expand...
Click to collapse
Perro

Hello,
Glad to find crDroid on my Note 10 pro (after having it on my Note5 pro and on my Note 8T, both in my kids' hands now).
Small additional information for beginners:
1) after having formatted the data (and answered "yes"), it is necessary to reboot on the Recovery before installing crDroid
2) If you come from "Arrow" ROM, you can't directly install crDroid. Indeed, Arrow OS changes things in the "vendor" partition, while the installation of cdDroid doesn't seem to affect this partition. I tried to switch directly from Arrow to crDroid, but the phone was rebooting on Recovery. The best is to flash MIUI. Then (no need to start on it) you can flash crDroid.
3) Finally, I have already had several issues after updates crDroid on my other phones (dirty flash), because of the encryption. Now, to protect from problems, I deactivate the encryption (especially with the Note 10 pro, TWRP seems to be still in beta). Usually, to turn off encryption, I would use #dfe. But it doesn't work in this case. So, I recommend that you use "rmcrypt.zip" found in the "Arrow" forum, and which I attach to you in this post.
Important note: If you are using "mcrypt.zip" to turn off encryption, turn off OTA updates. You have to update manually, because you have to relaunch mcrypt after each system update.
Otherwise, the ROM seems to work pretty well. With the exception of the camera: as with other ROMs: selfies are limited to 4 Mpixs (even with GCam).
Enjoy
Manu D.

nice and smooth rom. only problem i got: i can't use the bank app because say the phone is rooted(but i cant find magisk)
:

Thanks for this ROM !
I have the same problem with my bank app, I don't known why, device is not rooted.

yonutz said:
nice and smooth rom. only problem i got: i can't use the bank app because say the phone is rooted(but i cant find magisk)
:
Click to expand...
Click to collapse
2spirit said:
Thanks for this ROM !
I have the same problem with my bank app, I don't known why, device is not rooted.
Click to expand...
Click to collapse
hmm, both of my banking apps working just fine using magisk hide & hide and rename magisk manager app, so not sure why it's not working for you...
check if your device passes safetynet test either with or without magisk, selinux should be enforcing

All in all, love it! Thank you!
Two issues that I found:
Sound is a bit distorted in comparison with Arrow OS or stock.
Brightness lives its own life, needs constant tweaking.

iRet said:
All in all, love it! Thank you!
Two issues that I found:
Sound is a bit distorted in comparison with Arrow OS or stock.
Brightness lives its own life, needs constant tweaking.
Click to expand...
Click to collapse
Good sense of humor! Yes, the brightness issue raises its head in all ROMs like birth pangs in a baby.
I'm waiting with bated breath for the OSS version to come up next month before I migrate from Arrow. Don't want to keep backing.restoring my data every other day.

yonutz said:
nice and smooth rom. only problem i got: i can't use the bank app because say the phone is rooted(but i cant find magisk)
:
Click to expand...
Click to collapse
There's issue with ro.debuggable which will get fixed in my next official build, for now you can flash this magisk module - https://github.com/kdrag0n/safetynet-fix/releases

Decided to give another try. Brightness is not that terrible this time.
Stumbled upon non-working Android Auto.
This is a common LOS problem according to the net and might be caused by gapps.

Hello,
I experimented a big issue.
I was under crDroid 7.7 with rmcrypt.zip to be sure to have no problem with encryption.
I tryed to update manually to version 7.8 (with the same rmcrypt.zip) and the system stayed frozzen at boot on the colored eye (colors loop again and again for hours).
After this bad experience, I tryed again to update without rmcrypt.zip : same result.
But after that, my data was unaccessible. The only solution was to format and came back to v7.7. It was impossible to install v 7.8 :-(
Of course, I need to reinstall and setup all my apps. Was it a problem with gapps and my uncrypted system ?
So, is it possible to have a vanilla version of v7.8 ?
Thanks by advanced,
Manu D.

ManuD_Linux said:
Hello,
I experimented a big issue.
I was under crDroid 7.7 with rmcrypt.zip to be sure to have no problem with encryption.
I tryed to update manually to version 7.8 (with the same rmcrypt.zip) and the system stayed frozzen at boot on the colored eye (colors loop again and again for hours).
After this bad experience, I tryed again to update without rmcrypt.zip : same result.
But after that, my data was unaccessible. The only solution was to format and came back to v7.7. It was impossible to install v 7.8 :-(
Of course, I need to reinstall and setup all my apps. Was it a problem with gapps and my uncrypted system ?
So, is it possible to have a vanilla version of v7.8 ?
Thanks by advanced,
Manu D.
Click to expand...
Click to collapse
latest CrDroid 7.8 is OSS vendor based, while changing vendors MIUI -> OSS clean flash is mandatory, for decryption you should use DFE, check below...
[SCRIPT][FLASHABLE] Encryption disablers for Redmi Note 10 Pro (MIUI vendor, OSS vendor) [SWEET]
So, here is a little script, which I modified to work on Redmi Note 10 Pro (tested and working on sweet). I didn't create this, only modified it, so all credits goes to ghostrider_reborn. Edit: found another working encryption disabler...
forum.xda-developers.com

jeryll said:
latest CrDroid 7.8 is OSS vendor based, while changing vendors MIUI -> OSS clean flash is mandatory, for decryption you should use DFE, check below...
Click to expand...
Click to collapse
Thank you very much, this information is important to know. I will try again with a clean flash.
NB : but even with this solution, is it possible to have a vanilla version without gapps ?
Thanks by advance... Sincerely,
Manu D.

ManuD_Linux said:
Thank you very much, this information is important to know. I will try again with a clean flash.
NB : but even with this solution, is it possible to have a vanilla version without gapps ?
Thanks by advance... Sincerely,
Manu D.
Click to expand...
Click to collapse
CrDroid 7.8 has its own thread here on xda, you should discuss anything related there:
[ROM][Android 11][SWEET/SWEETIN] crDroid v7.13 [OFFICIAL][OSS][25.12.2021]
*** Disclaimer I am not responsible for any damage you made to your device You have been warned crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features...
forum.xda-developers.com
around a week ago the dev asked on telegram if we want vanilla version and when people said yes, he said "OMK will post after 2 hours" (whatever that means), but so far nothing like vanilla hadn't been released

THREAD LOCKED
First post deleted.
Regards,
shadowstep
Forum Moderator