Database Develop

[Q] Device Unlocked - Status Code: 3

Hi All,
I have a non-DE XT1060 with an unlocked bootloader. I am attempting to flash a custom recovery, but I am running into issues. When I go into fastboot, it shows the device is indeed unlocked, but says Status Code: 3, where it would normally say Status Code: 1.
I am guessing this is part of my issue, since when I run the command ADB DEVICES, my device does not appear on the list. However, when I run the command ADB FASTBOOT DEVICES, it will list my device out. Because of this, I am having trouble flashing a custom recovery and obtaining root.
If anyone knows what Status Code: 3 actually means or has other ideas what might be going on, I would appreciate your help. I did a fair amount of searching online already, but nothing seemed quite the same as the issue I was having. Thanks in advance for any help.

I recently unlocked my device with the same status code 3 and had difficulties flashing the recovery also... In the android development section theres a post called recovery unlocked they mention that the correct command to flash would be mfastboot instead of fastboot (i guess its a motorola thing) also Adb commands don't run while in fastboot...

I think I had a misunderstanding of what fastboot was, but your reply prompted me to read more and I get it now. That being said, when I attempt to flash the recovery via fastboot, I receive the error: (bootloader) Variable not supported!

For the record, it does respond to commands such as fastboot devices and fastboot reboot-bootloader

Never had that outcome but having the latest adb/fastboot files would make things easier... If it still occurs

Is your command prompt path correct to the same folder as your recovery.img and your fastboot and mfastboot.exe files?

Yeah, you beat me to it... I had the directory wrong... needed C:\adb\
D'oh!! Thanks for your help though.

i have status 3 its normal or not ?

Apparently its normal as it all worked fine for me once I had the correct directory.

JustROLLIN said:
Apparently its normal as it all worked fine for me once I had the correct directory.
Click to expand...
Click to collapse
sure ? all have unlock bootloader have status 3 ?

maxou88 said:
sure ? all have unlock bootloader have status 3 ?
Click to expand...
Click to collapse
Status code 3 is perfectly normal and it indicates an unlocked bootloader in the case of the moto x. Nothing to worry about there. Every unlocked moto x displays status code 3. :good:

Oh ok thx my friend

my phone MOTO E stucks on warning bootloader unclocked.....plz help me...????
while doing fastboot its shows its not recognized by internal or external command...

samwathegreat said:
Status code 3 is perfectly normal and it indicates an unlocked bootloader in the case of the moto x. Nothing to worry about there. Every unlocked moto x displays status code 3. :good:
Click to expand...
Click to collapse
If you relock the bootloader will the status code change and will the software status change from modified to whatever it says before it was unlocked?

HELP please
mine is the moto g turbo edition XT1557 running marshmellow 6.0
and i unlocked the bootlocker status code 3
while trying to boot the phone it vibrates once and gets stuck on the "warning boot locker unlocked screen"
tried the logo thing, the wipe data thing. Noting is working can anyone help me ???

Is it possible to root Rog Phone 3

My phone is Rog Phone 3
WW_17.0823.2012.122
My boot loader is unlock since i used the boot loader unlocking app but i cant seem to flash twrp.
i have everything file necessary to root but when my phone goes into flashboot mode it stops detecting my phone
it detects perfectly fine during "adb devices" but when i run the "adb reboot-bootloader" command then it disconnects.
i also notice that my laptop doesnt have the "android" in "other devices" instead I have "universal serial bus usb" inside device manager.
can anyone help me?

Yes - it is absolutely possible to root!
Please check this forum properly for guides to root; plenty of info on this topic already.

Could you perhaps send me a link? As i keep getting errors when trying to flash twrp recovery when in fastboot mode

Yrmx said:
Could you perhaps send me a link? As i keep getting errors when trying to flash twrp recovery when in fastboot mode
Click to expand...
Click to collapse
I suggest that you factory reset it, try flashing another ROM (old) and retry. Everything is possible and as a proof my device is rooted, edxposed installed safetynet passing, magisk, TWRP installed. Only thing remaining is to get rid of the bootloader unlocked warning message.

Your device is corrupt

Hi there,
I just bought a pixel 5 phone and tried to unlock bootloader
After I made the steps described in that post for P5 ... after flasing the magisk img file I wanted to reboot the phone but it is stuck on the message:
"Your device is corrupt. It can't be trusted and may not work properly.
Visit this link on another device.
link..."
What can I do to fix that issue? I'm trying to root it and install lineageos after.
Regards,
LE: Most probably I run the command with fastboot installed with apt in ubuntu 20
Version from fastboot from ubuntu: fastboot version 1:8.1.0+r23-5ubuntu2
LEE:
Pfiu ... I was pretty scared ... fixed it with this link: https://flash.android.com/devices
Can somebody let me know please if the issue was because of the bad fastboot version?
Also ... I saw there is a kddi version and without it ... tried without kddi as I don't know exactly to verify if I'm having kddi

I wanted to try again to root the phone. Went to developer options and now oem unlocking is grayed, i cannot change id and it says:
"bootloader is already unlocked".
Click to expand...
Click to collapse
Then I said to go to fastboot mode but when I'm running the command:
Code:
fastboot devices
it cannot see my phone now, I'm seeing an empty output now.
Also ... when I want to start the phone I'm seeing:
"the bootloader is unlocked and the integrity ..."
Click to expand...
Click to collapse
Can somebody please help me? what should I do?

What's the problem? The message appears on some devices that had their bootloader unlocked. So the message alone does not matter.

The problem is that I don't have root access and I want to try again those steps for root
...
I want to make the steps described for how to unlock the bootloader and have root permissions as I want to install then lineageos on the phone
Thank you
LE: so the problem is described above in more details and what exactly I did before coming at this situation

So I was able to see again the device in fastboot (enabled stay awake)
When I tried command:
Code:
fastboot flashing unlock
it said it is already unlocked
Then I flashed magisk img but I can't see it on my phone
Any advice please?

dallas87 said:
So I was able to see again the device in fastboot (enabled stay awake)
When I tried command:
Code:
fastboot flashing unlock
it said it is already unlocked
Then I flashed magisk img but I can't see it on my phone
Any advice please?
Click to expand...
Click to collapse
Pull down your notifications and allow USB debugging after plugging in on your PC perhaps? Also check the box to always allow.

I don't try anymore to root my phone as I don't want to use lineageos custom rom. I already installed one that doesn't need root.
Thanks
LE: What I installed without root required had issue for me with sim manager
I finally rooted my phone and installed lineageos that is working well

Question Can't get into fastboot to unlock bootloader

Phone info
OPPO A74 5G
Model number - CPH2197
Build number - CPH2197_11_A.12
Android 11
Developer Mode enabled
OEM Unlock enabled
USB Debugging enabled
Below are screenshots of all of the above
[Screenshots](https://imgur.com/a/qw0fUAw)
Phone is recognised by ADB but not Fastboot and as such I cannot unlock the Bootloader. Is there something I've done wrong or something else I can try?
When entering "Fastboot devices" in CMD nothing comes up.
When entering command "ADB reboot Bootloader" in CMD the phone restarts instead of loading into Bootloader.
I have tried turning phone off and the pushing power button + vol up - this just keeps restarting phone.
Any help would be much appreciated as I'd really like to root this phone all extra info in images on Imgur. Link above.

DeeSkye said:
Phone info
OPPO A74 5G
Model number - CPH2197
Build number - CPH2197_11_A.12
Android 11
Developer Mode enabled
OEM Unlock enabled
USB Debugging enabled
Below are screenshots of all of the above
[Screenshots](https://imgur.com/a/qw0fUAw)
Phone is recognised by ADB but not Fastboot and as such I cannot unlock the Bootloader. Is there something I've done wrong or something else I can try?
When entering "Fastboot devices" in CMD nothing comes up.
When entering command "ADB reboot Bootloader" in CMD the phone restarts instead of loading into Bootloader.
I have tried turning phone off and the pushing power button + vol up - this just keeps restarting phone.
Any help would be much appreciated as I'd really like to root this phone all extra info in images on Imgur. Link above.
Click to expand...
Click to collapse
Did you find a way? I tried everything but I couldn't get into fastboot

No way to enter fastboot mode for oppo phones. Now I use Oppo A74 4G version. Cannot enter fastboot mode. It's locked by Oppo. And they don't give bootloader code for unlock BL. Only way is to change phone

I've been trying run fastboot too. 4 hours later I find this thread. That explains it
Last Oppo phone I buy I guess.
Did you manage to find a workaround for this by chance?

Has anyone tried rebooting from recovery to then enter fastboor or?
Im gonna look into myself soon...
Ive seen this issue before on a different phone but cant remember how they bypassed it
Perhaps yall can try to find a post where they did so.. maybe it'll work on this phone too.

I was able too get to fastboot mode. The phone labels it "recoveryd mode", however, fastboot commands work.
1st. Connect phone and confirm ADB is connected by using "ADB devices" command.
2nd. Enter "adb reboot fastboot bootloader"
Phone will reboot into "recoveryd mode". It looks exactly like the normal recovery mode except the title displayed after you select the language and fastboot commands will work.
However, I still have not found out how to unlock the bootloader, so it does me no good.

try doing adb reboot fastboot or adb reboot bootloader

fastboot oem unlock
FAILED (remote: 'Unable to open fastboot HAL')
fastboot: error: Command failed
guys ,, fails
when trying to boot to fastboot and not fastbootd

Question UI recovery - adb communication

Hi, I would know if while the phone is in UI recovery mode it is possible to run adb commands.
At the moment I get the message: ADB Android Device Unauthorized.
I don't have unlocked bootloader or root privilegies.
Thanks

ultrasound1991 said:
Hi, I would know if while the phone is in UI recovery mode it is possible to run adb commands.
At the moment I get the message: ADB Android Device Unauthorized.
I don't have unlocked bootloader or root privilegies.
Thanks
Click to expand...
Click to collapse
Not in stock recovery, by normal means.