I have a Beklin Wireless Charging Pad 10W and it works fine with my XZ2. However sometime I need to share my mobile network to the laptop, and every time when I plug the USB cable it will automatically change to get charge by USB.
Of cause I can keep the wireless charging by using the hotspot feature, but I find that hotspot + wireless charging + once opening some other apps it will make the phone overheat and I often get the overheat message. Therefore I am curious, is it possible to keep charging by Wireless Pad and share the mobile network with USB cable?
Thank you!
Related
Greetings! I tether my celly for use as a modem but it uses battery power. I want it to use the PC power thus not draining the battery thus happy celly thus happy me Any thoughts??
You talking about Wifi tether? Because what I do is I USB tether and no power issues.
If I understand you correctly and Ive not tried it but can you not connect the phone via USB and and then wifi "tether" simultaneously?
Remember the thread about IntShrUI ? Just run this file located on the windows folder while synced and done!
"I think" I now understand the issue...
I got curious and tether my Phone over USB for a few hours while downloading a big file, the phone eventually died, apparently it uses more power during tether than the PC USB can charge "500ma". The only thing that comes to mind is that you could use a double USB cable that would provide 1000ma or wait for USB 3.0 cable and hardware which provide such already by default. Or a AC to 5v powered USB cable? That's all that comes to mind, unless you can hardware hack a PC's USB port to provide more power lol
bastukee said:
"I think" I now understand the issue...
I got curious and tether my Phone over USB for a few hours while downloading a big file, the phone eventually died, apparently it uses more power during tether than the PC USB can charge "500ma". The only thing that comes to mind is that you could use a double USB cable that would provide 1000ma or wait for USB 3.0 cable and hardware which provide such already by default. Or a AC to 5v powered USB cable? That's all that comes to mind, unless you can hardware hack a PC's USB port to provide more power lol
Click to expand...
Click to collapse
Okay, thanks man. I appreciate it. I'll screw around with it some more and report back to u..
bastukee said:
..... apparently it uses more power during tether than the PC USB can charge "500ma".
Click to expand...
Click to collapse
Makes sense to me since a recharge via the wall plug or my car (vs. a USB port on my PC) is much faster.
tethering
I use the assasins lament WiFi router while using the AC usb adapter. I understand exactly what your are referring to. I have tried to use the dual usb cable that comes with the Imagio, one side for connection and the other for power, didn't work to well.
One major concern is while using the USB tether mode the active sync needs to be disabled, thats a bugger when you want to download and then perform an install.
I have a g2, but looking for a universal dock with separate connections for micro-usb and AC to allow for simultaneous fast charging and sync connection to a PC. Does such a thing exist?
Don't think so, since those 4 USB pins are all connected to the charger (2 for power +/-, and 2 to let the phone know about it's higher charging capacity), leaving no room for a standard usb connection any more.
On phone, wireless charge is connect on USB. And it has priority over other uses of USB like OTG. On MI 9 I don't know. Please tell me, if OTG and wireless charge is OK .
Wireless charge in usb,? I don't think so, either usb OR wireless charge. Not together....
For me on modified xiaomi.eu its working wireless charge and otg.
Thank you. Before the spiral of the wireless charge was connected to the usb port , so no otg with wireless charge.
Another question. I can not find the dlna. It's in the specs.
Pity that the usb is not 3 and not slimport or mhl.
Does anyone know of a USB cable that it capable of supporting AA and has USB-C on one end (for device) and double 3.1 on the other end (to vehicle)?
I have 2 USB ports in my vehicle. The input port for AA does not charge the phone sufficiently when is running and the other port does fast charging but doesn't allow AA to run.
Thanks very much!
Welcome to the never ending problem! No, it is not possible to do what you want to do, that is, to be connected to AA and to fast charge your phone from an other usb port or car charger. I tried everything, including powered usb hubs, nothing works, unfortunately.
Sent from my SM-N975F using Tapatalk
Do you have wireless charging on the phone? Might be able to add a wireless pad in the car.
Note10.1Dude said:
Do you have wireless charging on the phone? Might be able to add a wireless pad in the car.
Click to expand...
Click to collapse
Thought about that but I'm worried about overheating. I guess I might need to try it and find out?
Do not be worried of overheating, if the phone is connected to a usb cable and port and it detects charging, it will automatically disable the wireless charging.
The only way is to replace, if possible, car's charging circuit with a fast charging one.
Sent from my SM-N975F using Tapatalk
Hi there!
My life does not match any pattern, that's probably why the new Smart Charge feature does not really work. I manually stop charging around 80% whenever possible. However, I frequently travel by car using Android Auto which requires me to connect the phone to the car using USB. It will ALWAYS charge to 100% when connected. Are there any options to disable charging at all? Are there USB cables which do not charge but rather provide a data only connection? Do you have any other suggestions?
You can't do it.
Usb data transfer needs +5v.
You can make a usb cable charge only, but not a usb cable data transfer only.