Hi,
I made a big mistake>
I tried the android 11 beta >>> It doesn’t has google play >>>>>>
I downgraded to android 9 again
this message appeared >>> your device is corrupt >>>> It can’t be trusted and will not boot.
I tried to flash my global rom by pc with Qualcomm flash image loader but I did not find the needed fiels in the extracted folder .
I need these files ( rawprogram ..... pach file .... programmer file )
or help me please any way .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi! On fastboot mode you may unlock the bootloader and flash TWRP: https://forum.xda-developers.com/nubia-z20/how-to/twrp-install-t4008263
Put the TWRP file in adb folder and start the installation. Boot into recovery and flash ROM
Enviado desde mi IN2013 mediante Tapatalk
How??
hugopalmeiro6 said:
Hi! On fastboot mode you may unlock the bootloader and flash TWRP: https://forum.xda-developers.com/nubia-z20/how-to/twrp-install-t4008263
Put the TWRP file in adb folder and start the installation. Boot into recovery and flash ROM
Enviado desde mi IN2013 mediante Tapatalk
Click to expand...
Click to collapse
How can Iput the TWRP file in adb folder ??
the device doesn’t boot .
Only works on fastboot ...
thanks.
The adb folder on your PC, you must conect your phone at your pc and unlock the bootloader, then install twrp
Enviado desde mi NX627J mediante Tapatalk
hugopalmeiro6 said:
The adb folder on your PC, you must conect your phone at your pc and unlock the bootloader, then install twrp
Enviado desde mi NX627J mediante Tapatalk
Click to expand...
Click to collapse
Dear friend,thanks alot for your help.
I finally flashed the rom with your help.
But I couldn’t flash the global rom .... Only the cn rom
when I try to flash the global version the problem appears again.
Help me plz How to make my device accepts the rom.
Thank you again.
moody.alroomy said:
Dear friend,thanks alot for your help.
I finally flashed the rom with your help.
But I couldn’t flash the global rom .... Only the cn rom
when I try to flash the global version the problem appears again.
Help me plz How to make my device accepts the rom.
Thank you again.
Click to expand...
Click to collapse
global rom or chinese rom twrp flash
after
wipe + format data + yes
nubiaz20 said:
global rom or chinese rom twrp flash
after
wipe + format data + yes
Click to expand...
Click to collapse
I didn’t understand , but I did that ( wipe + format data )
and I copied the ( zip file )..( the global ) from pc to mob. storage.
and it finished installing but after restarting the same message appears.
when I install the cn version every thing goes well.
but I don’t understand chines and there is no google play apps.
moody.alroomy said:
I didn’t understand , but I did that ( wipe + format data )
and I copied the ( zip file )..( the global ) from pc to mob. storage.
and it finished installing but after restarting the same message appears.
when I install the cn version every thing goes well.
but I don’t understand chines and there is no google play apps.
Click to expand...
Click to collapse
nooooooo
listen to me
Switching from chinese rom to global rom or global rom to chinese rom
1 - ınstall rom
after
2- wipe format data + yes
china rom + google play services for
1 ınstall china rom ( after ) wipe + format data + yes and
open phone and set up define fingerprint
after repeat
install twrp
and gapps install and start phone
nubiaz20 said:
nooooooo
listen to me
Switching from chinese rom to global rom or global rom to chinese rom
1 - ınstall rom
after
2- wipe format data + yes
china rom + google play services for
1 ınstall china rom ( after ) wipe + format data + yes and
open phone and set up define fingerprint
after repeat
install twrp
and gapps install and start phone
Click to expand...
Click to collapse
I’ll try and tell you .
thank you very much for your patience.
Thank you very much.
nubiaz20 said:
nooooooo
listen to me
Switching from chinese rom to global rom or global rom to chinese rom
1 - ınstall rom
after
2- wipe format data + yes
china rom + google play services for
1 ınstall china rom ( after ) wipe + format data + yes and
open phone and set up define fingerprint
after repeat
install twrp
and gapps install and start phone
Click to expand...
Click to collapse
Dear friend,thank you so much.
I flashed the global rom successfully and my phone returned as it was before .
All credit goes to you .:good:
Thank you .. thank you .. thank you .:good::good:
moody.alroomy said:
Dear friend,thank you so much.
I flashed the global rom successfully and my phone returned as it was before .
All credit goes to you .:good:
Thank you .. thank you .. thank you .:good::good:
Click to expand...
Click to collapse
I installed china rom + gapps (android9) from android11, but then how can I flash the global ROM (2.03)?? I can't....
hugopalmeiro6 said:
I installed china rom + gapps (android9) from android11, but then how can I flash the global ROM (2.03)?? I can't....
Click to expand...
Click to collapse
Switching from chinese rom to global rom or global rom to chinese rom
1 - ınstall rom
after
2- wipe format data + yes
a developer should make us a custom rom based on android 11r with gapps and multilanguage. do you think we have the necessary data to create one?
It does not work
hugopalmeiro6 said:
Hi! On fastboot mode you may unlock the bootloader and flash TWRP: https://forum.xda-developers.com/nubia-z20/how-to/twrp-install-t4008263
Put the TWRP file in adb folder and start the installation. Boot into recovery and flash ROM
Enviado desde mi IN2013 mediante Tapatalk
Click to expand...
Click to collapse
That doesn't work, this warning even before recovery could be initialized and lock you out of your phone, I'm facing the problem as well and nothing seem to work not even the flash tool.
[email protected] said:
a developer should make us a custom rom based on android 11r with gapps and multilanguage. do you think we have the necessary data to create one?
Click to expand...
Click to collapse
I agree
hugopalmeiro6 said:
Hi! On fastboot mode you may unlock the bootloader and flash TWRP: https://forum.xda-developers.com/nubia-z20/how-to/twrp-install-t4008263
Put the TWRP file in adb folder and start the installation. Boot into recovery and flash ROM
Enviado desde mi IN2013 mediante Tapatalk
Click to expand...
Click to collapse
Dear,
First thx for your help and support, i faced the same problem and i solved it using your steps.
Now i installed the Chinese Rom 3.11 v , can i install Google play services on this version?
if it is possible plz send me the link for gapps
khaledbedawy said:
Dear,
First thx for your help and support, i faced the same problem and i solved it using your steps.
Now i installed the Chinese Rom 3.11 v , can i install Google play services on this version?
if it is possible plz send me the link for gapps
Click to expand...
Click to collapse
Can anyone help me? It happens to me exactly like the author of this post, I had a completely functional Nubia Z20 with global ROM in Android 9 but I wanted Android 11 so I installed the ROM easily from the phone itself and everything installed correctly but I didn't know it was a Chinese ROM, so I tried to go back and the the problem start, I got stuck in that message of "Corrupt Device".
After many videos, forums, try and fail I finally can open the bootloader and install TWRP, but I follow exactly the steps you all recommend here, first I wipe the data, factory reset and then install the stock rom, everything goes fine but when I click on reboot it goes back to the message "Corrupt Device", than I read this post and did exactly what it says, after the ROM finish the installation I do a factory reset but when I click on reboot it says "There is no O.S, do you want to continue anyway?"
So I'm stocked, I don't know what else can I do, please if some one knows something, HELP ME.
Alrick920 said:
Может кто-нибудь мне помочь? Это происходит со мной точно так же, как и с автором этого поста, у меня был полностью функциональный Nubia Z20 с глобальным ПЗУ в Android 9, но я хотел Android 11, поэтому я легко установил ПЗУ с самого телефона, и все было установлено правильно, но я не знал это был китайский ПЗУ, поэтому я попытался вернуться, и возникла проблема, я застрял в этом сообщении «Поврежденное устройство».
После множества видео, форумов, попыток и неудач, я, наконец, могу открыть загрузчик и установить TWRP, но я следую точно тем шагам, которые вы все рекомендуете здесь: сначала я стираю данные, сбрасываю заводские настройки, а затем устанавливаю стандартный ROM, все идет нормально, но когда Я нажимаю на перезагрузку, он возвращается к сообщению «Поврежденное устройство», затем я прочитал этот пост и сделал именно то, что он говорит, после завершения установки ПЗУ я выполняю сброс настроек, но когда я нажимаю на перезагрузку, он говорит: «Нет ОС, вы все равно хотите продолжить? "
Так что у меня есть запасы, я не знаю, что еще я могу сделать, пожалуйста, если кто-то что-то знает, ПОМОГИТЕ МНЕ.
Click to expand...
Click to collapse
Translation:
Can anyone help me? This happens to me in exactly the same way as the author of this post, I had a fully functional Nubia Z20 with a global ROM in Android 9, but I wanted Android 11, so I easily installed the ROM from the phone itself and everything was installed correctly. but I didn't know it was Chinese ROM so I tried to go back and there was a problem, I got stuck with this "Damaged device" message. After lots of videos, forums, attempts and failures, I can finally open the bootloader and install TWRP, but I follow exactly the steps you all recommend here: first I erase data, reset to factory settings, and then install the standard ROM, everything goes fine, but when I click on reboot, it goes back to the message "Damaged device", then I read this post and did exactly what it says, after finishing the ROM installation I do a factory reset, but when I click on restart it says, “No OS, do you want to continue anyway? " So I have supplies, I don't know what else I can do, please, if anyone knows something, HELP ME.
Click to expand...
Click to collapse
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am very happy to share this rom with you. Actually, I'm waiting @sboida1 to share this rom for 3 days. But he seems busy. So I decided to share it.
This rom ported from @Aabyebaby's work. --> http://forum.xda-developers.com/gal.../kkmiui7-i9200-i9205-i9208-aabyebaby-t3363061
Miui resources don't support dual sim, unfortunately. Therefore 9192 user can't use this rom
Don't use updater app. If you try to update your rom with it, you will stuck in bootloop
Flashing steps
1-Root your phone.
For 9195 --> http://forum.xda-developers.com/showthread.php?t=2364980
For 9190 --> http://forum.xda-developers.com/showthread.php?t=2398143
If you already rooted your phone, go next step.
2-Flash TWRP recovery
For 9190 9195 --> http://forum.xda-developers.com/showthread.php?t=2678420
3-Download rom files and copy to your SD Card.
Rom for 9190 --> https://mega.nz/#F!yBkj1CaL!v0RUjroWz_lPcUU8qP7x9w
Rom for 9195 --> https://mega.nz/#F!HR8w0SjA!Fl8-_h6ubUuqe1DZwqKZqA
Another host (9190 and 9195) --> https://www.androidfilehost.com/?w=files&flid=85960
Gapps --> http://mirror41.downloadandroidrom....cro-4.4.4-20140629-signed.zip?token=122591809
I just want to use Google Play Store. So I edited top gapps for myself (deleted text to speech, google home, voice search, google calendar, gmail, setup wizard ,news&weather). It installs only google play store and applications that are required for run the google play store. You can aslo use this.
--> https://mega.nz/#!Cc8zEKqI!6ksw7UgXVuPu5tQBVwOGf3hnyrNmcKnb7UCI0zwCwFI
4- Go into reocvery mode.
Be sure that you have nandroid backup before flashing rom.
5- Wipe with swiping in twrp.
6- Flash rom and gapps(if you want).
7- Reboot your phone.
Thank you
@Aabyebaby for your work.
@DarkFrenzy for your help and fix files
@sboida1 for your friendship and your support
@semdoc for inspired me working on roms
If you can't make a download with mobile data, follow this steps --> Tools>Downloads>Settings>Download size limit:Unlimited
If you want to use Shortcut flash this via recovery http://en.miui.com/forum.php?mod=at...wNTEwfDE0Njk3MDE4NzZ8MzQyNTcwOTIzfDI4MzI1NQ== Settings>Additional settings>Shortcut menu and activate it. (Thank you @ukicar for your suggestion)
If you have battery draining issues because of google play services or something else get help from this page --> http://en.miui.com/thread-51541-1-1.html
I'll add new screenshots and update rom the newer version when I can find enough time and motivation
Sorry for my bad English
Awesome! Going to try now
Are there any specific bugs if u can tell?
edit:
i successfully installed rom with fix you gave us @Aabyebaby
everything works good for now! Thanks.
thank you @umuturunc ... I can not wait to flash it
Fact is that my mi4 became W10M phone (for testing purposes) .. this is a great opportunity once again to use miui rom..
-----------------------------
edit
status 7 error for 9195 is present, unfortunately, :crying:
Very good, I hope I can help you solve some bug.
My email:[email protected]
emeğinize sağlık türkçe dili eklendimi yoksa bizmi ekleyeceğiz mıuı 7 versiyonunda jbart çalışıyormu
erkan1982 said:
emeğinize sağlık türkçe dili eklendimi yoksa bizmi ekleyeceğiz mıuı 7 versiyonunda jbart çalışıyormu
Click to expand...
Click to collapse
It has multi language. But you can also use jbart [emoji4]
GT-I9190 cihazımdan Tapatalk kullanılarak gönderildi
I succeeded to flash rom .. any suggestions for Google Installer?
ukicar said:
I succeeded to flash rom .. any suggestions for Google Installer?
Click to expand...
Click to collapse
You can install Google Apps in miui app store
https://youtu.be/VS5tJGmq6Rk
Thank you for remembered it.
Nice, but what about i9192?
Thankyou for this port rom umuturunc. I will give it a try today! May I find bugs I will post them or/and try to fix it. Keep up the goodwork!
I have flashed the rom, and its beautifull my friend. Thankyou for this, I hope we will not encounter major bugs It looks amazing, so thankyou for this!
Egor Gunko said:
Nice, but what about i9192?
Click to expand...
Click to collapse
Unfortunately, miui sources don't support dual sim. Also I don't know how to include dual sim. Maybe SilashNair or k2wl can do this.
GT-I9190 cihazımdan Tapatalk kullanılarak gönderildi
umuturunc said:
I am very happy to share this rom with you. Actually, I'm waiting @sboida1 to share this rom for 3 days. But he seems busy. So I decided to share it.
This rom ported from @Aabyebaby's work. --> http://forum.xda-developers.com/gal...rom-mega6-3-i9200-i9205-i9208-miui-7-t3215882
Please give me info if you can flash the rom without status 7 error to 9195. I'm not sure if it will give error. Because I don't have 9195. I'm sorry.
Don't use updater app. If you try to update your rom with it, you will stuck in bootloop
9195 users do not flash rom. I'll share new link with solved status7 error when I arrived the dormitory. But if you can't wait, here is steps: Open PORT ROM\META-INF\com\google\android\updater-script directory with notepad++ . Change first line getprop("ro.product.device") == from "serrano3g" to "serranolte"
Flashing steps
Make sure that you have backup before falshing rom.
1-Root your phone.
For 9195 --> http://forum.xda-developers.com/showthread.php?t=2364980
For 9190 --> http://forum.xda-developers.com/showthread.php?t=2398143
If you already rooted your phone, go next step.
2-Flash TWRP recovery
For 9190 9195 --> http://forum.xda-developers.com/showthread.php?t=2678420 (I'm using v3.0.2 version)
3-Download rom files and copy to your SD Card.
Rom --> https://mega.nz/#!HYkhFD6L!Hq2PETEk1UG-qwZg2q4mjd2V9SpjgXwvRIsbLAcBVmA
Kernel --> https://mega.nz/#!2RkgnLAT!znZrtH3cBvJlCZZRMmdE1Y3nUHtTl1W-tPKsytXy7gE
sndfix file --> https://mega.nz/#!uMdU3byJ!0pk0-6sqrarzoLOyIFZVN7W9c4iH4kEgVpZCj9WKj9g
4- Go into reocvery mode.
5- Wipe with swiping in twrp.
6- Flash rom, kernel and sndfix file.
7- Reboot your phone.
If you want to Google Apps, watch this--> https://youtu.be/VS5tJGmq6Rk
There is a icon bug. I'm still working on it. Your help is also appreciated.
Thank you
@Aabyebaby for your work.
@DarkFrenzy for your help and fix files
@sboida1
@semdoc for inspired me about working on roms
Screenshots
I'll add new screenshots and update rom the newer version when I can find enough time and motivation
Sorry for my bad English
Click to expand...
Click to collapse
Good job my friend, I'm waiting this ROM a long time.
Kardeş eline ayağına sağlık denemedim ama MIUI V7 başlığını görünce hemen girdim
TurkRevolution said:
Good job my friend, I'm waiting this ROM a long time.
Kardeş eline ayağına sağlık denemedim ama MIUI V7 başlığını görünce hemen girdim
Click to expand...
Click to collapse
Please do not reply whole op's post.
Nice to hear you liked it ?
GT-I9190 cihazımdan Tapatalk kullanılarak gönderildi
If you have device GT-I9195 and want to flash this rom. You can change the updater script like it says in the OP. But if you dont have that much knowledge about editing the Updater Script. You can use the updater script just by erasing the updater script file in the port rom and replacing it with the one I have uploaded. And after just follow the instructions in the guide.
- Open the zip file port rom MIUI v7.
- Go to META-INF after COM after GOOGLE after ANDROID after delete the UPDATER SCRIPT
- And replace it with the one you have downloaded.
- Repack it into .ZIP file with 7ZIP. By selecting all the files in home screen of the zip file. And right click than choose `add to archive`. In options choose for the Archive Format : .zip and for Compression Level: Store. You dont need to change anything else. After the zip file be created and you will flash succesfully this port rom on your GT-I9195!. Happy Flashing
Link Updater Script : www52.zippyshare.com/v/SgQWjSoo/file.html
---------- Post added at 03:53 PM ---------- Previous post was at 03:23 PM ----------
ukicar said:
I succeeded to flash rom .. any suggestions for Google Installer?
Click to expand...
Click to collapse
You can download this PA_gapps and flash it on the MIUI v7 rom. I have tryed it and it works fine on my phone
www.androidfilehost.com/?fid=95916177934551097
ukicar said:
I succeeded to flash rom .. any suggestions for Google Installer?
Click to expand...
Click to collapse
You can download this PA_gapps and flash it on the MIUI v7 rom. I have tryed it and it works fine on my phone
www.androidfilehost.com/?fid=95916177934551097
If you try, you can write a review?
serti6610 said:
You can download this PA_gapps and flash it on the MIUI v7 rom. I have tryed it and it works fine on my phone
www.androidfilehost.com/?fid=95916177934551097
Click to expand...
Click to collapse
Yes, but as far as I can remember .. miui calendar was replaced with Google's?
ukicar said:
Yes, but as far as I can remember .. miui calendar was replaced with Google's?
Click to expand...
Click to collapse
No. Still using miui calender.
Hey friend, I have a problem after the first update. I don't know English too much and i write it Turkish.
TR:
Kardeşim aşağıdaki gördüğün ekran görüntüsünde olduğu gibi tüm ikonlar birbirine girdi. İlk yüklediğimde bunun gibi bir problem vardı ama o bu kadar değildi. Yeni bir güncelleme var dedikten sonra telefon yeniden başladı. "S4 MİNİ" ekranında biraz takıldı, sonra tekrar "kernel'i ve "..fix" dosyasını flashladım. Açıldı. Ancak güncellemeden sonra ekran görüntüsündeki problemler olmaya başladı. Özelden yazarsan sevinirim.
TurkRevolution said:
Hey friend, I have a problem after the first update. I don't know English too much and i write it Turkish.
TR:
Kardeşim aşağıdaki gördüğün ekran görüntüsünde olduğu gibi tüm ikonlar birbirine girdi. İlk yüklediğimde bunun gibi bir problem vardı ama o bu kadar değildi. Yeni bir güncelleme var dedikten sonra telefon yeniden başladı. "S4 MİNİ" ekranında biraz takıldı, sonra tekrar "kernel'i ve "..fix" dosyasını flashladım. Açıldı. Ancak güncellemeden sonra ekran görüntüsündeki problemler olmaya başladı. Özelden yazarsan sevinirim.
Click to expand...
Click to collapse
You have to edit the ro.sf.lcd_density nd persist.xsdensity from 285 to 240 in build.prop
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It is powered by rum tweets, performance engines, Battery Tweaks, Audio Engines and more, and bug fixes.
1. Camera is fully working
2.Video Recording Works Completely
3.Media Browser Fully Operated
4. Google Apps is Complete
5. Download Manager Works Fully
6.Video is fully functional and plays smoothly up to 340p (Use Software Decoder in MX Player)
7. Super Smooth and Fast
8.System 30MB extra empty
9.include ubuntu touch theme ( just select settings>themes>ubuntu touch
10. All languages supported
Downloads
[HİDE]
yarrox_explorer96.zip
[/HİDE]
Screenshots
[HİDE]
screenshots here
[/HİDE]
INSTALLATION
just Restore system and boot images on TWRP
install gapss and restart
Performance Tips:
1. Tap the build number to enable Developer Options. Disable all window animations within the developer.
2. Enable KSM from the memory management option in the performance tab in the settings
all sources
https://github.com/androidarmv6/
nice job bro ! but you should add some screenshot ! and do you have any solution for youtube ?
The file you are trying to download is no longer available.
This could be due to the following reasons:
The file has been removed because of a ToS/AUP violation.
Invalid URL - the link you are trying to access does not exist
The file has been deleted by the user.
9bz said:
The file you are trying to download is no longer available.
This could be due to the following reasons:
The file has been removed because of a ToS/AUP violation.
Invalid URL - the link you are trying to access does not exist
The file has been deleted by the user.
Click to expand...
Click to collapse
Phreaker8 said:
nice job bro ! but you should add some screenshot ! and do you have any solution for youtube ?
Click to expand...
Click to collapse
thread updated
changelog:
theme engine and ubuntu touch theme added to system
youtube not fixed yet but you can use tubidy.mobi
9bz said:
The file you are trying to download is no longer available.
This could be due to the following reasons:
The file has been removed because of a ToS/AUP violation.
Invalid URL - the link you are trying to access does not exist
The file has been deleted by the user.
Click to expand...
Click to collapse
Phreaker8 said:
nice job bro ! but you should add some screenshot ! and do you have any solution for youtube ?
Click to expand...
Click to collapse
thread updated
changelog:
theme engine and ubuntu touch theme added to system
youtube not fixed yet but you can use tubidy.mobi(like youtube go)
well seeing new rom for ace in 2019. its very interesing. i will test it 3-4 days later. for youtube app i suggest newpipe it is available on f-droid(idk if they support 4.4).
Reis eline sağlık güzel görünüyor. Lise son olduğumdan asıl telefonumu bırakıp Ace'yi kullanıyorum sene başından beri. Stock romda şuan. Geçen hafta mezuniyetten dolayı öbür telefonu aldım 1 günlüğüne. WhatsApp ı falan ona geçirdim. Daha sonra tekrar Aceye geçeyim dedim fakat WhatsApp böyle bi hata veriyor
https://i.hizliresim.com/V9kZ3y.jpg
Nasıl düzeltebilirim bunun hakkında bir fikrin var mı? WhatsApp'ın sürümü ta 2017 den kalma bir sürüm. Google Play'de öyle yani orda bile güncel uygulamalar gözükmüyor. Acil yardım lazım
Bir de rom kurulumu detaylı anlatır mısın normal 4.4 rom kurmak için modems5360 kuruyoruz ya o lazım mı? Yoksa direk stock üstüne kurabilir miyim? ( Cwm recovery var twrp yok. Onu da kurmam lazım mı?)
senemir said:
Reis eline sağlık güzel görünüyor. Lise son olduğumdan asıl telefonumu bırakıp Ace'yi kullanıyorum sene başından beri. Stock romda şuan. Geçen hafta mezuniyetten dolayı öbür telefonu aldım 1 günlüğüne. WhatsApp ı falan ona geçirdim. Daha sonra tekrar Aceye geçeyim dedim fakat WhatsApp böyle bi hata veriyor
https://i.hizliresim.com/V9kZ3y.jpg
Nasıl düzeltebilirim bunun hakkında bir fikrin var mı? WhatsApp'ın sürümü ta 2017 den kalma bir sürüm. Google Play'de öyle yani orda bile güncel uygulamalar gözükmüyor. Acil yardım lazım
Bir de rom kurulumu detaylı anlatır mısın normal 4.4 rom kurmak için modems5360 kuruyoruz ya o lazım mı? Yoksa direk stock üstüne kurabilir miyim? ( Cwm recovery var twrp yok. Onu da kurmam lazım mı?)
Click to expand...
Click to collapse
hocam stock rom kullanmayın whatsap android 2.3 destegini kesti diger kitkat rom konularından s5360 modem kurun sonra bu romu kurun kolay gelsin
Link for gapss?
Hi @hgunduz295,
I get the following errors:
can't open /cache/recovery/log
can't open /cache/recovery/last_log
Recovery Version is v5.0.2.8
I use a 5839i (it's a 5830i branded by german Telekom)
Any suggestions?
Thanks in Advance
Mierscheid
Mierscheid said:
Hi @hgunduz295,
I get the following errors:
can't open /cache/recovery/log
can't open /cache/recovery/last_log
Recovery Version is v5.0.2.8
I use a 5839i (it's a 5830i branded by german Telekom)
Any suggestions?
Thanks in Advance
Mierscheid
Click to expand...
Click to collapse
you need to use twrp
hgunduz295 said:
you need to use twrp
Click to expand...
Click to collapse
OMG! My fault! There is CWM installed! :-O
Mierscheid said:
OMG! My fault! There is CWM installed! :-O
Click to expand...
Click to collapse
you need twrp
wipe dalvik /system/data/cache after this
just Restore system and boot images on TWRP
install gapss and restart
Hi, are links dead/damaged? The file is not "yarrox_explorer96.zip" but "TWRPbackup.zip" and if I try to install this with TWRP I got this error:
Could not find "META-INF/com/google/android/update-binary" in the zip file.
Error installing zip file "/sdcard/TWRPbackup.zip"
I also wiped dalvik/system/data/cache but nothing happens.
Any help will be appreciated, thank you.
YourOldNerd said:
Hi, are links dead/damaged? The file is not "yarrox_explorer96.zip" but "TWRPbackup.zip" and if I try to install this with TWRP I got this error:
Could not find "META-INF/com/google/android/update-binary" in the zip file.
Error installing zip file "/sdcard/TWRPbackup.zip"
I also wiped dalvik/system/data/cache but nothing happens.
Any help will be appreciated, thank you.
Click to expand...
Click to collapse
Just download the file "TWRPbackup" then put it in the twrp folder of your micro sd and select the option restore
Javier564 said:
Just download the file "TWRPbackup" then put it in the twrp folder of your micro sd and select the option restore
Click to expand...
Click to collapse
Hello Javier564,
my precondition is:
Officially updated S5839i to Android 2.3.6 and otherwise no other modifications done to the phone.
I just successfully installed TWRP-3.0.2-1-b1-cooperve.zip on my S5839i from here: https://forum.xda-developers.com/ga...recovery-twrp-2-8-7-0-touch-recovery-t3463050 by the built-in recovery-mode.
It works now I got a running TWRP.
So I downloaded your "TWRPbackup.zip" put it on the sd card, went into TWRP-recovery-mode and went to "restore" (yes, I wiped dalvik/cache/data/system before) as you described.
I selected the "ubuntu-bckup" (only "boot" and "system " available) and restored. The process finished flawlessly so I pressed "reboot".
But then during boot there is almost a blank screen (I think I have hardly seen some kind of animation but the screen is almost dark) and waited more than 15mins, but nothing happens.
Could you please explain step-by-step your installation steps? And what do you exactly mean by "just Restore system and boot images on TWRP" . I thought the "boot image" is the "TWRP-3.0.2-1-b1-cooperve.zip".
Thanks so much in advance.
---------- Post added at 12:23 PM ---------- Previous post was at 12:04 PM ----------
Pfony said:
Hello Javier564,
my precondition is:
Officially updated S5839i to Android 2.3.6 and otherwise no other modifications done to the phone.
I just successfully installed TWRP-3.0.2-1-b1-cooperve.zip on my S5839i from here: https://forum.xda-developers.com/ga...recovery-twrp-2-8-7-0-touch-recovery-t3463050 by the built-in recovery-mode.
It works now I got a running TWRP.
So I downloaded your "TWRPbackup.zip" put it on the sd card, went into TWRP-recovery-mode and went to "restore" (yes, I wiped dalvik/cache/data/system before) as you described.
I selected the "ubuntu-bckup" (only "boot" and "system " available) and restored. The process finished flawlessly so I pressed "reboot".
But then during boot there is almost a blank screen (I think I have hardly seen some kind of animation but the screen is almost dark) and waited more than 15mins, but nothing happens.
Could you please explain step-by-step your installation steps? And what do you exactly mean by "just Restore system and boot images on TWRP" . I thought the "boot image" is the "TWRP-3.0.2-1-b1-cooperve.zip".
Thanks so much in advance.
Click to expand...
Click to collapse
Just SOLVED my problem: I removed SIM-card and sd-card and booted. The system started perfectly.
THANK you so much for your effort and great ROM.:good:
Pfony said:
Just SOLVED my problem: I removed SIM-card and sd-card and booted. The system started perfectly.
THANK you so much for your effort and great ROM.:good:
Click to expand...
Click to collapse
Nice to hear but all credits goes to OP @hgunduz295
Problem now: when SIM-card inserted the phone doesn't boot/crashes/freeze during boot
Javier564 said:
Nice to hear but all credits goes to OP @hgunduz295
Click to expand...
Click to collapse
Yes, big thanks to the OP!
NOW the problem is: when having a SIM-card inserted the phone crashes during boot and freezes.
I tried one hint to wipe cache after installing the ROM, but since this is not a ROM but a backup it probably didn't work due to this reason.
Has anybody please a working solution for the SIM-card detection problem. That would be so much appreciated.
Pfony said:
Problem now: when SIM-card inserted the phone doesn't boot/crashes/freeze during boot
Yes, big thanks to the OP!
NOW the problem is: when having a SIM-card inserted the phone crashes during boot and freezes.
I tried one hint to wipe cache after installing the ROM, but since this is not a ROM but a backup it probably didn't work due to this reason.
Has anybody please a working solution for the SIM-card detection problem. That would be so much appreciated.
Click to expand...
Click to collapse
As seen in the screenshots the sim card was working but I could not fully understand the problem.
hgunduz295 said:
It is powered by rum tweets, performance engines, Battery Tweaks, Audio Engines and more, and bug fixes.
1. Camera is fully working
2.Video Recording Works Completely
3.Media Browser Fully Operated
4. Google Apps is Complete
5. Download Manager Works Fully
6.Video is fully functional and plays smoothly up to 340p (Use Software Decoder in MX Player)
7. Super Smooth and Fast
8.System 30MB extra empty
9.include ubuntu touch theme ( just select settings>themes>ubuntu touch
10. All languages supported
Downloads
[HİDE]
yarrox_explorer96.zip
[/HİDE]
Screenshots
[HİDE]
screenshots here
[/HİDE]
INSTALLATION
just Restore system and boot images on TWRP
install gapss and restart
Performance Tips:
1. Tap the build number to enable Developer Options. Disable all window animations within the developer.
2. Enable KSM from the memory management option in the performance tab in the settings
all sources
https://github.com/androidarmv6/
Click to expand...
Click to collapse
i don`t undersand all positiv Statements, not useable, not possible login in google account
Oh it works, you just have to use "browser login".
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
A Chinese dev team has recently released an ROM AURORA for the s9/s9+, and hence I am sharing it here for everyone to enjoy.
The original Dev thread (in Chinese): Here
Note: I am not affiliated to the Dev team of this ROM, just a s9/s9+ user who would like to share the ROM with everyone here. Hence, NO dev support will be provided.
Some elements of the UI/ROM options are in Chinese. Thank you for your understanding
Flash at your own risk! I am not responsible for any dead device, loss of data, etc.
[Ver 27.update log]
- Based on G9650 official latest Android 10.0 bottom package G9650ZCU9FUE3 (OneUI2.5).
- All APPs are upgraded to the latest official version.
- Aurora settings detail adjustment.
- KeysCafe keyboard special effects are perfectly supported (click here to download KeysCafe and theme parks, which will take effect after opening them).
- One-click hide MAGISK function (Aurora Settings -> System Enhancement), which can bypass some APP detection
Instructions
1, Download Aurora ver 27 :https://bit.ly/370ICUP
OLD VERSION
[26.0 update log]
- Add Font
- AuroraSetting translate 99% by me
- Based on the latest official G9650 Android 10.0 bottom package G9650ZCU9FUC5 (OneUI2.5).
- All APPs are upgraded to the latest official version.
- All MAGISK components are upgraded to the latest official version.
- The new version of Aurora Settings will pop up ROOT for the first time, please be patient and wait for a few seconds.
- KeysCafe keyboard special effects are perfectly supported (click here to download KeysCafe and theme parks, which will take effect after opening them).
- Added one-key hide MAGISK function (Aurora Settings -> System Enhancement), which can bypass some APP detection.
- Transplant S21 wallpaper and lock screen animation.
- RootExplorer is upgraded to the latest 4.9.1 version.
- This upgrade has changed a lot. It is recommended to double-clean and refresh after backing up the data.
AURORA ROM VERSION 26 ONe UI 2.5 : https://bit.ly/2V6IEYz
ROM AURORA v21 link: https://bit.ly/2yLeiA5
ROM AURORA v19 (android 9) link : http://bit.ly/2uCrsgH
2, Your device must unlock OEM, logout of samsung, google accounts, not locked by the network
3, Download odin and twrp by following the link:
Odin: https://bit.ly/2OE22pK
TWRP G9600: https://bit.ly/30CCoIS (Language Chinese )
TWRP G9650: https://bit.ly/2C1Qycb (Language Chinese )
Guide change language Chinese to English
OR
Orangefox RECOVERY for S9
Orangefox RECOVERY for s9+
4, Select odin AP section of TWRP download unchecked Auto restart
Click start, then boot into TWRP (volume up + bixby + power) select WIPE -> Format DATA (will lose all data)-> type "yes" -> Swpie to factory Reset
Next, select reboot -> recovery
- Perform 4wipe (davik, davik cache, data, system)
- Flash the installer zip (download link below).
- The first boot may take 5-10 mins. Be patient.
- Once the setup wizard pops up, change the language to English (or any language of your choice)
*For SafetyNet to pass, you need to enable Magisk hide in Magisk manager settings
*Special note: Do not update any system apps as the device model has been modified, and updating system apps may cause errors.
XDA: DevDB Information
AURORA
CREDIT: @aurora Team
Contributors @bjnmonkey77, @klabit87
ROM OS Version: 10.0
Version Information
Status: Stable
Current Stable Version: V21
Stable Release Date: 2020-05-28
Group FaceBook:
***Add-on
- Remove Chinese lunar calendar in statusbar
- Add Google Services (CH play)
1. Active Google services and reboot
2. Grant Google service permission
****KeysCafe keyboard special effects are perfectly supported (click here to download KeysCafe and theme parks, which will take effect after opening them).
https://bit.ly/3u4RHVI (pass: vudroid)
Chủ thớt người Việt Nam phải ko?
giaoluan said:
Chủ thớt người Việt Nam phải ko?
Click to expand...
Click to collapse
Chuẩn bác , người việt nam ở sài gòn quận 2
Trying out now. One if there best stock based roms I've ever used
TheMadScientist said:
Trying out now. One if there best stock based roms I've ever used
Click to expand...
Click to collapse
I'm compiling the rom control of this rom,It will take a long time for me to finish it, My English is very poor, some words will not match its features , I hope you and everyone will support me to improve the translation better , thanks you
bjnmonkey77 said:
Chuẩn bác , người việt nam ở sài gòn quận 2
Click to expand...
Click to collapse
Nhân tiện cho mình hỏi là rom này dùng cho S9+ Mỹ G965U nhà mạng Sprint dc không bác?
giaoluan said:
Nhân tiện cho mình hỏi là rom này dùng cho S9+ Mỹ G965U nhà mạng Sprint dc không bác?
Click to expand...
Click to collapse
không được bác ơi tiêu đề mình ghi rõ rồi
Hi! Thanks for the rom link and for starting the rom control translating process!
I've tried installing v21 but got ERROR 7 in TWRP "symlink: some symlink failed"
Tried coming from a fresh odin flash (DTD5 ZTO) and from my last rooted stock rom with Magisk and Klabit kernel.
Any thoughts?
Thanks!
gboros said:
Hi! Thanks for the rom link and for starting the rom control translating process!
I've tried installing v21 but got ERROR 7 in TWRP "symlink: some symlink failed"
Tried coming from a fresh odin flash (DTD5 ZTO) and from my last rooted stock rom with Magisk and Klabit kernel.
Any thoughts?
Thanks!
Click to expand...
Click to collapse
Hello, you try to use twrp original , you will have to change Chinese language to English when odin twrp (I will show you how to change the language in attach files)
TWRP G9600: https://bit.ly/30CCoIS (Language Chinese )
TWRP G9650: https://bit.ly/2C1Qycb (Language Chinese )
bjnmonkey77 said:
Hello, you try to use twrp original , you will have to change Chinese language to English when odin twrp (I will show you how to change the language in attach files)
TWRP G9600: https://bit.ly/30CCoIS (Language Chinese )
TWRP G9650: https://bit.ly/2C1Qycb (Language Chinese )
Click to expand...
Click to collapse
Going to try latter! Thanks for the tip!
By the way, any progress on the rom control translation? If there's anything we can help just ask!
dual sim
bjnmonkey77 said:
Bug and fix
- Remove Chinese lunar calendar in statusbar
Click to expand...
Click to collapse
how do i use two sim? I have a zto sm_g9650! tried to install but was left with only 1
RodrigoAlmeida said:
how do i use two sim? I have a zto sm_g9650! tried to install but was left with only 1
Click to expand...
Click to collapse
try flashing the firmware CHC (China) or TGY (Hong Kong)
P/s:Flash at your own risk! I am not responsible for any dead device, loss of data, etc.
gboros said:
Going to try latter! Thanks for the tip!
By the way, any progress on the rom control translation? If there's anything we can help just ask!
Click to expand...
Click to collapse
Sorry for the late translation work, my job is to go out more often than at home. I hope everyone will understand
bjnmonkey77 said:
try flashing the firmware CHC (China) or TGY (Hong Kong)
P/s:Flash at your own risk! I am not responsible for any dead device, loss of data, etc.
Click to expand...
Click to collapse
where do I find these files?
RodrigoAlmeida said:
where do I find these files?
Click to expand...
Click to collapse
https://www.sammobile.com/samsung/galaxy-s9-plus/firmware/SM-G9650/CHC/
Please help
hello good morning friend, I am from Colombia, I am new using Aurora Rom, my phone is a galaxy s9 + G9650 I congratulate you for an excellent project, .. a question because only one SIM works for me and only one IMEI appears, I appreciate you can help me and you really deserve the donation Thank you friend, Blessings ..
您好朋友，早上好，我来自哥伦比亚，是Aurora Rom的新用户，我的手机是s9 + G9650。你真的应该得到捐赠谢谢朋友，祝福..
Nín hǎo péngyǒu, zǎoshang hǎo, wǒ láizì gēlúnbǐyǎ, shì Aurora Rom de xīn yònghù, wǒ de shǒujī shì s9 + G9650. Nǐ zhēn de yīnggāi dédào juānzèng xièxiè péngyǒu, zhùfú..
---------- Post added at 04:42 PM ---------- Previous post was at 03:47 PM ----------
hello friend how are you, friend was able to solve the issue of the two SIMs, help me the same thing happens
Thank you
bjnmonkey77 said:
Sorry for the late translation work, my job is to go out more often than at home. I hope everyone will understand
Click to expand...
Click to collapse
Actually I'm not asking for an ETA or trying to rush you. You're, as others, doind this in your spare time and for free! But if you need I can help translating, maybe reviewing English or other thing.
Thanks!
gboros said:
Actually I'm not asking for an ETA or trying to rush you. You're, as others, doind this in your spare time and for free! But if you need I can help translating, maybe reviewing English or other thing.
Thanks!
Click to expand...
Click to collapse
I attached the test file AURORA_Settings_test, you use app root explore copy and replace. Then set permission and reboot
The translation is 80% complete. my English is very bad. I hope everyone will contribute to the better translation. Thank you.
gboros said:
Hi! Thanks for the rom link and for starting the rom control translating process!
I've tried installing v21 but got ERROR 7 in TWRP "symlink: some symlink failed"
Tried coming from a fresh odin flash (DTD5 ZTO) and from my last rooted stock rom with Magisk and Klabit kernel.
Any thoughts?
Thanks!
Click to expand...
Click to collapse
You have to flash the chinese firmware.
Guys there is a new update available, check the screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Would it be possible for you to pull up the ota via logcat?
I need a twrp backup of this. I only converted my china to global and tried pulling the mp4 update and flashing it manually, i still cant update it. Im running Chinese 12.5 now reverted the original firmware back but would be cooler if its global. Thanks
Jbazt_katuforzs said:
I need a twrp backup of this. I only converted my china to global and tried pulling the mp4 update and flashing it manually, i still cant update it. Im running Chinese 12.5 now reverted the original firmware back but would be cooler if its global. Thanks
Click to expand...
Click to collapse
What version of CN rom are you using? Can you provide a link where I can download it? Currently at DPX Global Beta and no hopes for new update
Jhem OP5 said:
What version of CN rom are you using? Can you provide a link where I can download it? Currently at DPX Global Beta and no hopes for new update
Click to expand...
Click to collapse
I flashed the mp4 CN via twrp then from there, all OTA update up to joyui 12.5 came with no problems. Ends up on CN MR1 which i noticed more stable than MP3 GLOBAL
Here is the link to the firmware. https://cdn-ota.blackshark.com/KLE-...y_xiaomi_7127e98fc8d7994364599de6cfafad1a.zip
Jbazt_katuforzs said:
I flashed the mp4 CN via twrp then from there, all OTA update up to joyui 12.5 came with no problems.
Click to expand...
Click to collapse
Will the OTA update work with unlocked bootloader and twrp installed?
Jbazt_katuforzs said:
I flashed the mp4 CN via twrp then from there, all OTA update up to joyui 12.5 came with no problems.
Here is the link to the firmware. https://cdn-ota.blackshark.com/KLE-...y_xiaomi_7127e98fc8d7994364599de6cfafad1a.zip
Click to expand...
Click to collapse
Do you have the link for the CN mp4 version as well as installing Google apps? I was able to flash the Joy UI 12 before but had a hard time installing Google Apps that's why I reverted back to Global but on DPX
Jhem OP5 said:
Do you have the link for the CN mp4 version as well as installing Google apps? I was able to flash the Joy UI 12 before but had a hard time installing Google Apps that's why I reverted back to Global but on DPX
Click to expand...
Click to collapse
Yes i figured out how to put google services (as you can see in the video) but it requires root. I updated my reply with the link. Flash it first using twrp (format data recommended) then update up to MR1. You will put twrp + root on MR1.
I might write a tutorial how to put playstore on CN MR1
Full credits goes to this thread for providing us the firmware
[GUIDE] Get official OTA download link + ota link collection
Before starting prepare phone: 1. Make sure your phone can still receive updates. You can also reinstall a fresh rom (with an older android version) by downloading it https://www.androidfilehost.com/?fid=14943124697586376728 and install by...
forum.xda-developers.com
Guihardrock said:
Guys there is a new update available, check the screenshot View attachment 5406341
Click to expand...
Click to collapse
On CN MR0, 5G SA was added and on MR1, most bugs fixed. I noticed a significant stability on 5g connection.
Jbazt_katuforzs said:
Yes i figured out how to put google services (as you can see in the video) but it requires root. I updated my reply with the link. Flash it first using twrp (format data recommended) then update up to MR1. You will put twrp + root on MR1.
I might write a tutorial how to put playstore on CN MR1
Full credits goes to this thread by providing the firmware
[GUIDE] Get official OTA download link + ota link collection
Before starting prepare phone: 1. Make sure your phone can still receive updates. You can also reinstall a fresh rom (with an older android version) by downloading it https://www.androidfilehost.com/?fid=14943124697586376728 and install by...
forum.xda-developers.com
Click to expand...
Click to collapse
Thank you! I'll try it once I'm done with work for the day. If it's okay with you too, can you provide the guide with rooting in CN and installing the Google Apps via Root? Or it's the same process wherein we extract the boot img and convert it in magisk?
Jhem OP5 said:
Thank you! I'll try it once I'm done with work for the day. If it's okay with you too, can you provide the guide with rooting in CN and installing the Google Apps via Root? Or it's the same process wherein we extract the boot img and convert it in magisk?
Click to expand...
Click to collapse
Yes the root method is same like that
Jbazt_katuforzs said:
On CN MR0, 5G SA was added and on MR1, most bugs fixed. I noticed a significant stability on 5g connection.
Click to expand...
Click to collapse
in my case I can't connect to any 5g network after updating my phone.
Jhem OP5 said:
Would it be possible for you to pull up the ota via logcat?
Click to expand...
Click to collapse
sorry for aswering so late, unluckily right after updating my phone I made a factory reset because mine was laggy as hell, so I couldn't access to it.
Guihardrock said:
sorry for aswering so late, unluckily right after updating my phone I made a factory reset because mine was laggy as hell, so I couldn't access to it.
Click to expand...
Click to collapse
Sokay now. I just downloaded a file from apk mirror and everything is ok now. Thanks anyways
Hey guys im trying to update to 12.5 but all the method i try dont work, im on KLEN2009280CN00MQ3 with the stock recovery and i get an error with the dial method update.
Jbazt_katuforzs said:
Yes the root method is same like that
Click to expand...
Click to collapse
Hi! Was able to convert my Global DPX with the firmware you've provided and updated it to the latest version(MR2 I think). Would you be able to provide the guide on how to install the GApps?
Jbazt_katuforzs said:
Yes the root method is same like that
Click to expand...
Click to collapse
Can you also provide the TWRP file that you used? It seems that the previous twrp for Android 10 no longer works.
Jhem OP5 said:
Hi! Was able to convert my Global DPX with the firmware you've provided and updated it to the latest version(MR2 I think). Would you be able to provide the guide on how to install the GApps?
Click to expand...
Click to collapse
-Root w Magisk
-install Magisk hide props (to configure the fingerprint props via terminal)
-install Gapps core by Wacko1805
-enjoy everything workin (remember to set all permission 4 every app)
credits goes to @sco-mito
slashyuz6 said:
-Root w Magisk
-install Magisk hide props (to configure the fingerprint props via terminal)
-install Gapps core by Wacko1805
-enjoy everything workin (remember to set all permission 4 every app)
credits goes to @sco-mito
Click to expand...
Click to collapse
The only way to root with Magisk is by pulling up the boot img via ADB in TWRP but as of updating to MR2, using the same TWRP img as before only shows black screen then reboots back to the system.
Jhem OP5 said:
The only way to root with Magisk is by pulling up the boot img via ADB in TWRP but as of updating to MR2, using the same TWRP img as before only shows black screen then reboots back to the system.
Click to expand...
Click to collapse
then flash the global version, no headache with the google services.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This series of roms is focused to gain more performance and add some other features to the rom, all of them are based in latest firrmware for each
How To install:
1) install TWRP for your device
2) enter in advance wipe and wipe dalvik, system,data,internal storage and cache
3) format data partition
4) flash the rom
5) enjoy!!
Devices suppoted by now:
A10
A20
A30
A30s
A50
A70
Spoiler: old
Stockless 2.1changelog:
Spoiler: old2
updated base firmare to latest firmware, with COM csc, code cleaning, some performance adjusts and better ram management and some oneui4 goodies
Spoiler: old2
Stockless 2.2 changelog:revised firmware to version A305GUBU8CUJ1 with COO scs, some code improvement and goodies
Download Stockless 2.2
Download Stockless 2.2 A30F
https://www.androidfilehost.com/?fid=17825722713688287658
Stockless 2.3.1 changelog:
fixed some critical issue of droping performace
fixed ram manager
others fixes and improvements
added ram plus
Stockless 2.3.1 folder
Stockless 2.3.2Beta changelog:
improved performance
added 4G of ram plus
updated apps to latest versions
some fixes
A305G stockless 2.3.2Beta
Stockless Rom 2.4 changelog:
- apdated ram plus manager for better optimization
- fixed some gpu issues ( now has more and stables fps ( dont expect miracles but is doing his job )
- updated apps
- others changes for better stabiity and performance
- updated to base A305GUBS8CVD3
Stockless 2.4 Folder
ROM OS Version: 11
ROM Kernel: Stock
ROM Firmware Required: Stock Android 11
Status: Stable
Created 27-08-2021
Last Updated 11-05-2022
Kernel source: Stock from samsung
Telegram support Group[/SPOILER]
I loved the Room. I have had problems with the root. In certain apps it doesn't detect root or disables it. I installed Eureka, I don't know if this has affected that.
Congratulations, perfect ROM in a matter of being stock, works perfectly on A305GT, SafetyNet with success on Magisk, I like that it has a very cool night mode on Camera, congratulations on your work
Nfc?
Does it work on SM-A305F?
anonymousemode` said:
Does it work on SM-A305F?
Click to expand...
Click to collapse
yes, but i thinkyou need to change kernel due the rom uses stock A305G kernel
Hi thanks very perfect Rom, I install on A305f without kernel, but I have a problem:
I install root and root explore and give that root access but I can't manage system files
Help me please
..
Oneui5 said:
Hi thanks very perfect Rom, I install on A305f without kernel, but I have a problem:
I install root and root explore and give that root access but I can't manage system files
Help me please
Click to expand...
Click to collapse
Are you sure you are giving Root access?
is it support Korea version a305n ?
boomyi12345 said:
is it support Korea version a305n ?
Click to expand...
Click to collapse
I didn’t install this firmware, but I think if you install the kernels from your firmware (a305n), then it should work.
If you try to install, do not forget to make a backup
turo2710 said:
I didn’t install this firmware, but I think if you install the kernels from your firmware (a305n), then it should work.
If you try to install, do not forget to make a backup
Click to expand...
Click to collapse
ok
turo2710 said:
Are you sure you are giving Root access?
Click to expand...
Click to collapse
Yes, I guess we can't manage system folder in original rom
Oneui5 said:
Yes, I guess we can't manage system folder
Click to expand...
Click to collapse
Что делать, чтобы получить root? Установите здесь флажок для вашего файловогора менедже.
Translated by GT: What to do to get root? Check the box here for your file manager.
turo2710 said:
Что делать, чтобы получить root? Установите здесь флажок для вашего файловогора менедже.
Translated by GT: What to do to get root? Check the box here for your file manager.
View attachment 5516583 View attachment 5516585
Click to expand...
Click to collapse
I changed this, it's ok but I can't manage system folder with any file manager, we can't on original roms
Oneui5 said:
I changed this, it's ok but I can't manage system folder with any file manager, we can't on original roms
Click to expand...
Click to collapse
I guess I misunderstand you.If you install the firmware through odin,install magisk zip install magisk manager And after that you cannot delete or change anything in the system???
turo2710 said:
I guess I misunderstand you.If you install the firmware through odin,install magisk zip install magisk manager And after that you cannot delete or change anything in the system???
Click to expand...
Click to collapse
turo2710 said:
I guess I misunderstand you.If you install the firmware through odin,install magisk zip install magisk manager And after that you cannot delete or change anything in the system???
Click to expand...
Click to collapse
I wipe all things and install the rom from twrp after I install magisk zip and magisk APK, yes yes
Hi i change kernel today and my phone cant turn on i install Eureka and carbon
Hello. This rom is great. I tried to install magisk from TWRP but it seems like I just failed, The device after that just reboots. Could someone advise me how to keep this Rom and install Magisk in a correct way. I have an A305G bit8 device
Use magisk 24